Fix Stelian's email address

[karo-tx-uboot.git] / include / configs / omap3_overo.h

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 02920787458f6d59d61db3db16dbb19c34118cad..afdefd95572d7e2c7a46d21053c52377a8f5e845 100644 (file)
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -23,7 +23,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_ARMV7           1       /* This is an ARM V7 CPU core */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                1       /* which is a 34XX */
 #define CONFIG_OMAP3430                1       /* which is in a 3430 */
@@ -52,13 +51,14 @@
 #define CONFIG_INITRD_TAG              1
 #define CONFIG_REVISION_TAG            1
 
+#define CONFIG_OF_LIBFDT               1
+
 /*
  * Size of malloc() pool
  */
 #define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
                                                /* Sector */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
-                                               /* initial data */
 
 /*
  * Hardware drivers
@@ -119,6 +119,7 @@
 #define CONFIG_SYS_I2C_SLAVE           1
 #define CONFIG_SYS_I2C_BUS             0
 #define CONFIG_SYS_I2C_BUS_SELECT      1
+#define CONFIG_I2C_MULTI_BUS           1
 #define CONFIG_DRIVER_OMAP34XX_I2C     1
 
 /*
@@ -154,8 +155,9 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
-       "console=ttyS2,115200n8\0" \
+       "console=ttyO2,115200n8\0" \
        "mpurate=500\0" \
+       "optargs=\0" \
        "vram=12M\0" \
        "dvimode=1024x768MR-16@60\0" \
        "defaultdisplay=dvi\0" \
@@ -165,18 +167,18 @@
        "nandroot=/dev/mtdblock4 rw\0" \
        "nandrootfstype=jffs2\0" \
        "mmcargs=setenv bootargs console=${console} " \
+               "${optargs} " \
                "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
-               "omapfb.debug=y " \
                "omapdss.def_disp=${defaultdisplay} " \
                "root=${mmcroot} " \
                "rootfstype=${mmcrootfstype}\0" \
        "nandargs=setenv bootargs console=${console} " \
+               "${optargs} " \
                "mpurate=${mpurate} " \
                "vram=${vram} " \
                "omapfb.mode=dvi:${dvimode} " \
-               "omapfb.debug=y " \
                "omapdss.def_disp=${defaultdisplay} " \
                "root=${nandroot} " \
                "rootfstype=${nandrootfstype}\0" \
@@ -212,7 +214,7 @@
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "Overo # "
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -268,12 +270,11 @@
 #define PISMO1_NAND_SIZE               GPMC_SIZE_128M
 #define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
 
-#define CONFIG_SYS_MAX_FLASH_SECT      520     /* max number of sectors on */
-                                               /* one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS     2       /* max number of flash banks */
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
-#define CONFIG_SYS_FLASH_BASE          boot_flash_base
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_SYS_FLASH_BASE          PISMO1_NAND_BASE
+#endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
@@ -283,40 +284,16 @@
 #define ONENAND_ENV_OFFSET             0x240000 /* environment starts here */
 #define SMNAND_ENV_OFFSET              0x240000 /* environment starts here */
 
-#define CONFIG_SYS_ENV_SECT_SIZE       boot_flash_sec
-#define CONFIG_ENV_OFFSET              boot_flash_off
+#define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB */
+#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (100 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (100 * CONFIG_SYS_HZ)
-
-/* Flash banks JFFS2 should use */
-#define CONFIG_SYS_MAX_MTD_BANKS       (CONFIG_SYS_MAX_FLASH_BANKS + \
-                                       CONFIG_SYS_MAX_NAND_DEVICE)
-#define CONFIG_SYS_JFFS2_MEM_NAND
-/* use flash_info[2] */
-#define CONFIG_SYS_JFFS2_FIRST_BANK    CONFIG_SYS_MAX_FLASH_BANKS
-#define CONFIG_SYS_JFFS2_NUM_BANKS     1
-
-#ifndef __ASSEMBLY__
-extern unsigned int boot_flash_base;
-extern volatile unsigned int boot_flash_env_addr;
-extern unsigned int boot_flash_off;
-extern unsigned int boot_flash_sec;
-extern unsigned int boot_flash_type;
-#endif
-
 #if defined(CONFIG_CMD_NET)
 /*----------------------------------------------------------------------------
  * SMSC9211 Ethernet from SMSC9118 family
  *----------------------------------------------------------------------------
  */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X         1
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_SMC911X_BASE     0x2C000000
@@ -324,6 +301,10 @@ extern unsigned int boot_flash_type;
 #endif /* (CONFIG_CMD_NET) */
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR                (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE       0x800
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
 
 #endif                         /* __CONFIG_H */