omap5_evm: Enable CONFIG_CMD_BOOTZ

[karo-tx-uboot.git] / include / configs / omap3_overo.h

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 64adc7455c52b3fd18cea5ff09a6cdf5b0a9c257..fd31c739642b5698f3b7e4da0334aef0c9b1058c 100644 (file)
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -25,6 +25,7 @@
 #define CONFIG_OMAP                            /* in a TI OMAP core */
 #define CONFIG_OMAP34XX                                /* which is a 34XX */
 #define CONFIG_OMAP3_OVERO                     /* working with overo */
+#define CONFIG_OMAP_GPIO
 
 #define CONFIG_SDRC                            /* The chip has SDRC controller */
 
@@ -41,7 +42,6 @@
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ                          /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
@@ -188,7 +188,7 @@
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
@@ -205,7 +205,6 @@
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "Overo # "
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
@@ -231,13 +230,6 @@
 #define CONFIG_SYS_PTV                 2       /* Divisor: 2^(PTV+1) => 8 */
 #define CONFIG_SYS_HZ                  1000
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 << 10)     /* regular stack 128 KiB */
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */
@@ -301,9 +293,10 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE           0x40200800
-#define CONFIG_SPL_MAX_SIZE            (45 * 1024)
+#define CONFIG_SPL_MAX_SIZE            (54 * 1024)     /* 8 KB for stack */
 #define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
 
 /* move malloc and bss high to prevent clashing with the main image */
@@ -317,6 +310,7 @@
 #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION   1
 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
 
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
 #define CONFIG_SPL_I2C_SUPPORT
@@ -325,6 +319,10 @@
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_POWER_SUPPORT
 #define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"