mxs: Make ehci-mxs multiport capable

[karo-tx-uboot.git] / include / configs / omap730p2.h

diff --git a/include/configs/omap730p2.h b/include/configs/omap730p2.h
index 166d592ccdbbf5a09d0e03436ade86207843a0c0..f24b765ee82cc609a8abd8df3bb9bef0f5979ee4 100644 (file)
--- a/include/configs/omap730p2.h
+++ b/include/configs/omap730p2.h
@@ -47,10 +47,6 @@
 
 #define CONFIG_SYS_CLK_FREQ       13000000
 
-#undef CONFIG_USE_IRQ                       /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R
-
 #define CONFIG_CMDLINE_TAG        1         /* enable passing of ATAGs  */
 #define CONFIG_SETUP_MEMORY_TAGS   1
 
@@ -59,13 +55,12 @@
  */
 
 #define CONFIG_SYS_MALLOC_LEN             (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE          128       /* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
 
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE      0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
 
@@ -88,8 +83,6 @@
 
 #define CONFIG_CONS_INDEX         1
 #define CONFIG_BAUDRATE                   115200
-#define CONFIG_SYS_BAUDRATE_TABLE         { 9600, 19200, 38400, 57600, 115200 }
-
 
 /*
  * Command line configuration.
@@ -142,30 +135,15 @@
 #define CONFIG_SYS_MEMTEST_START          0x10000000          /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END            0x12000000          /* 32 MB in DRAM    */
 
-#undef CONFIG_SYS_CLKS_IN_HZ                /* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR              0x10000000          /* default load address */
 
 /* The OMAP730 has 3 general purpose MPU timers, they can be driven by
  * the RefClk (12Mhz) or by DPLL1. This time is further subdivided by a
  * local divisor.
  */
-
-#define CONFIG_SYS_TIMERBASE              0xFFFEC500          /* use timer 1 */
-#define CONFIG_SYS_PVT                    7                   /* 2^(pvt+1), divide by 256 */
-#define CONFIG_SYS_HZ                     ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PVT))
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-
-#define CONFIG_STACKSIZE          (128*1024)     /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ      (4*1024)       /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ      (4*1024)       /* FIQ stack */
-#endif
+#define CONFIG_SYS_TIMERBASE           0xFFFEC500      /* use timer 1 */
+#define CONFIG_SYS_PTV                 7       /* 2^(PTV+1), divide by 256 */
+#define CONFIG_SYS_HZ                  ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
@@ -183,6 +161,8 @@
 #error Unknown Boot Chip-Select number
 #endif
 
+#define PHYS_SRAM              0x20000000
+
 #define CONFIG_SYS_FLASH_BASE             PHYS_FLASH_1
 
 /*-----------------------------------------------------------------------
@@ -203,4 +183,7 @@
 #define CONFIG_ENV_SIZE                   0x20000        /* Total Size of Environment Sector */
 #define CONFIG_ENV_OFFSET                 0x20000        /* environment starts here  */
 
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR        PHYS_SRAM
+
 #endif   /* ! __CONFIG_H */