Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

[karo-tx-uboot.git] / include / configs / pm9261.h

diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index c7f0be91f06838a44750dd0b6affa03936b98bfb..ecc72b72d48f7174baee8b113aa82885f8d9fbc3 100644 (file)
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  * Ilko Iliev <www.ronetix.at>
  *
@@ -28,25 +28,31 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+
+#include <asm/hardware.h>
 /* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9261"
 
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define MASTER_PLL_DIV         15
 #define MASTER_PLL_MUL         162
 #define MAIN_PLL_DIV           2
+#define CONFIG_SYS_AT91_SLOW_CLOCK     32768           /* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK     18432000
 
 #define CONFIG_SYS_HZ          1000
 
-#define CONFIG_ARM926EJS       1       /* This is an ARM926EJS Core    */
-#define CONFIG_AT91SAM9261     1       /* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_SYS_AT91_CPU_NAME       "AT91SAM9261"
 #define CONFIG_PM9261          1       /* on a Ronetix PM9261 Board    */
 #define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff  */
 #define CONFIG_SYS_TEXT_BASE   0
-#define CONFIG_AT91FAMILY
+
+#define MACH_TYPE_PM9261       1187
+#define CONFIG_MACH_TYPE       MACH_TYPE_PM9261
 
 /* clocks */
 /* CKGR_MOR - enable main osc. */
@@ -154,16 +160,15 @@
 #define CONFIG_INITRD_TAG      1
 
 #undef CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
 
 /*
  * Hardware drivers
  */
 #define CONFIG_AT91_GPIO       1
 #define CONFIG_ATMEL_USART     1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3          1       /* USART 3 is DBGU */
+#define CONFIG_USART_BASE              ATMEL_BASE_DBGU
+#define        CONFIG_USART_ID                 ATMEL_ID_SYS
 
 /* LCD */
 #define CONFIG_LCD                     1
@@ -203,6 +208,7 @@
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_IMLS
 
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_PING                1
 #define CONFIG_CMD_DHCP                1
 #define CONFIG_CMD_NAND                1
@@ -226,7 +232,6 @@
 
 /* NAND flash */
 #define CONFIG_NAND_ATMEL
-#define NAND_MAX_CHIPS                         1
 #define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_BASE                   0x40000000
 #define CONFIG_SYS_NAND_DBW_8                  1
@@ -253,7 +258,6 @@
 #define CONFIG_DM9000_USE_16BIT                        1
 #define CONFIG_NET_RETRY_COUNT                 20
 #define CONFIG_RESET_PHY_R                     1
-#define CONFIG_NET_MULTI
 
 /* USB */
 #define CONFIG_USB_ATMEL
@@ -356,7 +360,6 @@
 #endif
 
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {115200 , 19200, 38400, 57600, 9600 }
 
 #define CONFIG_SYS_PROMPT              "pm9261> "
 #define CONFIG_SYS_CBSIZE              256
@@ -376,10 +379,4 @@
 #define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
                                GENERATED_GBL_DATA_SIZE)
 
-#define CONFIG_STACKSIZE               (32 * 1024)     /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
 #endif