powerpc: mpc8xx: remove stxxtc board support

[karo-tx-uboot.git] / include / configs / sama5d3xek.h

diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index c34feb5081b7093274e8c0fee6b942b4eeb18fdc..56c2454dff2ec1f33f94b49381a70ce6e9d0c6e4 100644 (file)
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -21,7 +21,6 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_AT91FAMILY
 #define CONFIG_ARCH_CPU_INIT
 
 #ifndef CONFIG_SPL_BUILD
@@ -34,6 +33,8 @@
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_OF_LIBFDT               /* Device Tree support */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* general purpose I/O */
 #define CONFIG_AT91_GPIO
 
@@ -243,7 +244,6 @@
 #define CONFIG_SYS_MALLOC_LEN          (1024 * 1024)
 
 /* SPL */
-#define CONFIG_SPL
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE           0x300000
 #define CONFIG_SPL_MAX_SIZE            0x10000
@@ -258,6 +258,8 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 
 #define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN         (512 << 10)
+
 #ifdef CONFIG_SYS_USE_MMC
 #define CONFIG_SPL_LDSCRIPT            arch/arm/cpu/at91-common/u-boot-spl.lds
 #define CONFIG_SPL_MMC_SUPPORT
@@ -267,6 +269,28 @@
 #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME       "u-boot.img"
 #define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT     64
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
+
+#elif CONFIG_SYS_USE_SERIALFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS             0
+#define CONFIG_SPL_SPI_CS              0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8400
+
 #endif
 
 #endif