da8xx: ea20: Add the configuration define for the exact SoC variant

[karo-tx-uboot.git] / include / configs / whistler.h

diff --git a/include/configs/whistler.h b/include/configs/whistler.h
index 2f2a512e159108b56e55c78b18cc8a05f04d7e47..1e554d81647b52aa91a9715d5c0bbdd5eebb575e 100644 (file)
--- a/include/configs/whistler.h
+++ b/include/configs/whistler.h
@@ -25,25 +25,23 @@
 #define __CONFIG_H
 
 #include <asm/sizes.h>
-#include "tegra2-common.h"
+#include "tegra20-common.h"
 
 /* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE     tegra2-whistler
+#define CONFIG_DEFAULT_DEVICE_TREE     tegra20-whistler
 #define CONFIG_OF_CONTROL
 #define CONFIG_OF_SEPARATE
 
 /* High-level configuration options */
-#define V_PROMPT               "Tegra2 (Whistler) # "
-#define CONFIG_TEGRA2_BOARD_STRING     "NVIDIA Whistler"
+#define V_PROMPT               "Tegra20 (Whistler) # "
+#define CONFIG_TEGRA_BOARD_STRING      "NVIDIA Whistler"
 
 /* Board-specific serial config */
-#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTA
-#define CONFIG_TEGRA2_UARTA_UAA_UAB
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_UAA_UAB
 #define CONFIG_SYS_NS16550_COM1                NV_PA_APB_UARTA_BASE
 
 #define CONFIG_MACH_TYPE               MACH_TYPE_WHISTLER
-#define CONFIG_SYS_BOARD_ODMDATA       0x2B080105 /* lp?, 512MB, UARTA */
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
@@ -58,34 +56,42 @@
 /* SD/MMC */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_TEGRA2_MMC
+#define CONFIG_TEGRA_MMC
 #define CONFIG_CMD_MMC
 
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
+#define CONFIG_FS_EXT4
+#define CONFIG_FS_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 
-/* Environment not stored */
-#define CONFIG_ENV_IS_NOWHERE
+/*
+ * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
+ * the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If
+ * they didn't, the boot sector layout may be different. However, use of that
+ * particular card is standard practice as far as I know.
+ */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
 
 /* USB Host support */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_USB
+
+/* USB networking support */
 #define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_USB_ETHER_ASIX
 
-#define CONFIG_CMD_NET      /* bootp, tftpboot, rarpboot    */
-#define CONFIG_CMD_NFS      /* NFS support          */
-#define CONFIG_CMD_PING
+/* General networking support */
+#define CONFIG_CMD_NET
 #define CONFIG_CMD_DHCP
 
-#include "tegra2-common-post.h"
+#include "tegra-common-post.h"
 
 #endif /* __CONFIG_H */