u8 drv_priv[0] __aligned(sizeof(void *));
};
+/**
+ * enum ieee80211_chanctx_switch_mode - channel context switch mode
+ * @CHANCTX_SWMODE_REASSIGN_VIF: Both old and new contexts already
+ * exist (and will continue to exist), but the virtual interface
+ * needs to be switched from one to the other.
+ * @CHANCTX_SWMODE_SWAP_CONTEXTS: The old context exists but will stop
+ * to exist with this call, the new context doesn't exist but
+ * will be active after this call, the virtual interface switches
+ * from the old to the new (note that the driver may of course
+ * implement this as an on-the-fly chandef switch of the existing
+ * hardware context, but the mac80211 pointer for the old context
+ * will cease to exist and only the new one will later be used
+ * for changes/removal.)
+ */
+enum ieee80211_chanctx_switch_mode {
+ CHANCTX_SWMODE_REASSIGN_VIF,
+ CHANCTX_SWMODE_SWAP_CONTEXTS,
+};
+
+/**
+ * struct ieee80211_vif_chanctx_switch - vif chanctx switch information
+ *
+ * This is structure is used to pass information about a vif that
+ * needs to switch from one chanctx to another. The
+ * &ieee80211_chanctx_switch_mode defines how the switch should be
+ * done.
+ *
+ * @vif: the vif that should be switched from old_ctx to new_ctx
+ * @old_ctx: the old context to which the vif was assigned
+ * @new_ctx: the new context to which the vif must be assigned
+ */
+struct ieee80211_vif_chanctx_switch {
+ struct ieee80211_vif *vif;
+ struct ieee80211_chanctx_conf *old_ctx;
+ struct ieee80211_chanctx_conf *new_ctx;
+};
+
/**
* enum ieee80211_bss_change - BSS change notification flags
*
* to vif. Possible use is for hw queue remapping.
* @unassign_vif_chanctx: Notifies device driver about channel context being
* unbound from vif.
+ * @switch_vif_chanctx: switch a number of vifs from one chanctx to
+ * another, as specified in the list of
+ * @ieee80211_vif_chanctx_switch passed to the driver, according
+ * to the mode defined in &ieee80211_chanctx_switch_mode.
+ *
* @start_ap: Start operation on the AP interface, this is called after all the
* information in bss_conf is set and beacon can be retrieved. A channel
* context is bound before this is called. Note that if the driver uses
* information in bss_conf is set up and the beacon can be retrieved. A
* channel context is bound before this is called.
* @leave_ibss: Leave the IBSS again.
+ *
+ * @get_expected_throughput: extract the expected throughput towards the
+ * specified station. The returned value is expressed in Kbps. It returns 0
+ * if the RC algorithm does not have proper data to provide.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw,
void (*unassign_vif_chanctx)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_chanctx_conf *ctx);
+ int (*switch_vif_chanctx)(struct ieee80211_hw *hw,
+ struct ieee80211_vif_chanctx_switch *vifs,
+ int n_vifs,
+ enum ieee80211_chanctx_switch_mode mode);
void (*restart_complete)(struct ieee80211_hw *hw);
int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+ u32 (*get_expected_throughput)(struct ieee80211_sta *sta);
};
/**
*/
void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
+#define IEEE80211_MAX_CSA_COUNTERS_NUM 2
+
/**
* struct ieee80211_mutable_offsets - mutable beacon offsets
* @tim_offset: position of TIM element
* @tim_length: size of TIM element
+ * @csa_counter_offs: array of IEEE80211_MAX_CSA_COUNTERS_NUM offsets
+ * to CSA counters. This array can contain zero values which
+ * should be ignored.
*/
struct ieee80211_mutable_offsets {
u16 tim_offset;
u16 tim_length;
+
+ u16 csa_counter_offs[IEEE80211_MAX_CSA_COUNTERS_NUM];
};
/**
*
* This function should be used if the beacon frames are generated by the
* device, and then the driver must use the returned beacon as the template
- * The driver is responsible to update the DTIM count.
+ * The driver or the device are responsible to update the DTIM and, when
+ * applicable, the CSA count.
*
* The driver is responsible for freeing the returned skb.
*
return ieee80211_beacon_get_tim(hw, vif, NULL, NULL);
}
+/**
+ * ieee80211_csa_update_counter - request mac80211 to decrement the csa counter
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * The csa counter should be updated after each beacon transmission.
+ * This function is called implicitly when
+ * ieee80211_beacon_get/ieee80211_beacon_get_tim are called, however if the
+ * beacon frames are generated by the device, the driver should call this
+ * function after each beacon transmission to sync mac80211's csa counters.
+ *
+ * Return: new csa counter value
+ */
+u8 ieee80211_csa_update_counter(struct ieee80211_vif *vif);
+
/**
* ieee80211_csa_finish - notify mac80211 about channel switch
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
void (*add_sta_debugfs)(void *priv, void *priv_sta,
struct dentry *dir);
void (*remove_sta_debugfs)(void *priv, void *priv_sta);
+
+ u32 (*get_expected_throughput)(void *priv_sta);
};
static inline int rate_supported(struct ieee80211_sta *sta,
projects / karo-tx-linux.git / blobdiff