* enum ieee80211_event_type - event to be notified to the low level driver
* @RSSI_EVENT: AP's rssi crossed the a threshold set by the driver.
* @MLME_EVENT: event related to MLME
+ * @BAR_RX_EVENT: a BAR was received
+ * @BA_FRAME_TIMEOUT: Frames were released from the reordering buffer because
+ * they timed out. This won't be called for each frame released, but only
+ * once each time the timeout triggers.
*/
enum ieee80211_event_type {
RSSI_EVENT,
MLME_EVENT,
+ BAR_RX_EVENT,
+ BA_FRAME_TIMEOUT,
};
/**
};
/**
- * enum ieee80211_rssi_event - data attached to an %RSSI_EVENT
+ * struct ieee80211_rssi_event - data attached to an %RSSI_EVENT
* @data: See &enum ieee80211_rssi_event_data
*/
struct ieee80211_rssi_event {
};
/**
- * enum ieee80211_mlme_event - data attached to an %MLME_EVENT
+ * struct ieee80211_mlme_event - data attached to an %MLME_EVENT
* @data: See &enum ieee80211_mlme_event_data
* @status: See &enum ieee80211_mlme_event_status
* @reason: the reason code if applicable
u16 reason;
};
+/**
+ * struct ieee80211_ba_event - data attached for BlockAck related events
+ * @sta: pointer to the &ieee80211_sta to which this event relates
+ * @tid: the tid
+ * @ssn: the starting sequence number (for %BAR_RX_EVENT)
+ */
+struct ieee80211_ba_event {
+ struct ieee80211_sta *sta;
+ u16 tid;
+ u16 ssn;
+};
+
/**
* struct ieee80211_event - event to be sent to the driver
- * @type The event itself. See &enum ieee80211_event_type.
+ * @type: The event itself. See &enum ieee80211_event_type.
* @rssi: relevant if &type is %RSSI_EVENT
* @mlme: relevant if &type is %AUTH_EVENT
+ * @ba: relevant if &type is %BAR_RX_EVENT or %BA_FRAME_TIMEOUT
+ * @u:union holding the fields above
*/
struct ieee80211_event {
enum ieee80211_event_type type;
union {
struct ieee80211_rssi_event rssi;
struct ieee80211_mlme_event mlme;
+ struct ieee80211_ba_event ba;
} u;
};
u8 key[0];
};
+#define IEEE80211_MAX_PN_LEN 16
+
+/**
+ * struct ieee80211_key_seq - key sequence counter
+ *
+ * @tkip: TKIP data, containing IV32 and IV16 in host byte order
+ * @ccmp: PN data, most significant byte first (big endian,
+ * reverse order than in packet)
+ * @aes_cmac: PN data, most significant byte first (big endian,
+ * reverse order than in packet)
+ * @aes_gmac: PN data, most significant byte first (big endian,
+ * reverse order than in packet)
+ * @gcmp: PN data, most significant byte first (big endian,
+ * reverse order than in packet)
+ * @hw: data for HW-only (e.g. cipher scheme) keys
+ */
+struct ieee80211_key_seq {
+ union {
+ struct {
+ u32 iv32;
+ u16 iv16;
+ } tkip;
+ struct {
+ u8 pn[6];
+ } ccmp;
+ struct {
+ u8 pn[6];
+ } aes_cmac;
+ struct {
+ u8 pn[6];
+ } aes_gmac;
+ struct {
+ u8 pn[6];
+ } gcmp;
+ struct {
+ u8 seq[IEEE80211_MAX_PN_LEN];
+ u8 seq_len;
+ } hw;
+ };
+};
+
/**
* struct ieee80211_cipher_scheme - cipher scheme
*
* @sta: station table entry, %NULL for per-vif queue
* @tid: the TID for this queue (unused for per-vif queue)
* @ac: the AC for this queue
- * @drv_priv: data area for driver use, will always be aligned to
- * sizeof(void *).
+ * @drv_priv: driver private area, sized by hw->txq_data_size
*
* The driver can obtain packets from this queue by calling
* ieee80211_tx_dequeue().
* the driver returns 1. This also forces the driver to advertise its
* supported cipher suites.
*
+ * @IEEE80211_HW_SUPPORT_FAST_XMIT: The driver/hardware supports fast-xmit,
+ * this currently requires only the ability to calculate the duration
+ * for frames.
+ *
* @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface
* queue mapping in order to use different queues (not just one per AC)
* for different virtual interfaces. See the doc section on HW queue
IEEE80211_HW_WANT_MONITOR_VIF = 1<<14,
IEEE80211_HW_NO_AUTO_VIF = 1<<15,
IEEE80211_HW_SW_CRYPTO_CONTROL = 1<<16,
- /* free slots */
+ IEEE80211_HW_SUPPORT_FAST_XMIT = 1<<17,
IEEE80211_HW_REPORTS_TX_ACK_STATUS = 1<<18,
IEEE80211_HW_CONNECTION_MONITOR = 1<<19,
IEEE80211_HW_QUEUE_CONTROL = 1<<20,
* Use the %IEEE80211_RADIOTAP_VHT_KNOWN_* values.
*
* @netdev_features: netdev features to be set in each netdev created
- * from this HW. Note only HW checksum features are currently
- * compatible with mac80211. Other feature bits will be rejected.
+ * from this HW. Note that not all features are usable with mac80211,
+ * other features will be rejected during HW registration.
*
* @uapsd_queues: This bitmap is included in (re)association frame to indicate
* for each access category if it is uAPSD trigger-enabled and delivery-
* stack. It is always safe to pass more frames than requested,
* but this has negative impact on power consumption.
*
- * @FIF_PROMISC_IN_BSS: promiscuous mode within your BSS,
- * think of the BSS as your network segment and then this corresponds
- * to the regular ethernet device promiscuous mode.
- *
* @FIF_ALLMULTI: pass all multicast frames, this is used if requested
* by the user or if the hardware is not capable of filtering by
* multicast address.
* mac80211 needs to do and the amount of CPU wakeups, so you should
* honour this flag if possible.
*
- * @FIF_CONTROL: pass control frames (except for PS Poll), if PROMISC_IN_BSS
- * is not set then only those addressed to this station.
+ * @FIF_CONTROL: pass control frames (except for PS Poll) addressed to this
+ * station
*
* @FIF_OTHER_BSS: pass frames destined to other BSSes
*
* @FIF_PROBE_REQ: pass probe request frames
*/
enum ieee80211_filter_flags {
- FIF_PROMISC_IN_BSS = 1<<0,
FIF_ALLMULTI = 1<<1,
FIF_FCSFAIL = 1<<2,
FIF_PLCPFAIL = 1<<3,
* Returns zero if statistics are available.
* The callback can sleep.
*
- * @get_tkip_seq: If your device implements TKIP encryption in hardware this
- * callback should be provided to read the TKIP transmit IVs (both IV32
- * and IV16) for the given key from hardware.
+ * @get_key_seq: If your device implements encryption in hardware and does
+ * IV/PN assignment then this callback should be provided to read the
+ * IV/PN for the given key from hardware.
* The callback must be atomic.
*
* @set_frag_threshold: Configuration of fragmentation threshold. Assign this
* The callback can sleep.
* @event_callback: Notify driver about any event in mac80211. See
* &enum ieee80211_event_type for the different types.
- * The callback can sleep.
+ * The callback must be atomic.
*
* @release_buffered_frames: Release buffered frames according to the given
* parameters. In the case where the driver buffers some frames for
struct ieee80211_vif *vif);
int (*get_stats)(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats);
- void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
- u32 *iv32, u16 *iv16);
+ void (*get_key_seq)(struct ieee80211_hw *hw,
+ struct ieee80211_key_conf *key,
+ struct ieee80211_key_seq *seq);
int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
};
#ifdef CONFIG_MAC80211_LEDS
-char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw,
- unsigned int flags,
- const struct ieee80211_tpt_blink *blink_table,
- unsigned int blink_table_len);
+const char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
+const char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
+const char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
+const char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
+const char *
+__ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw,
+ unsigned int flags,
+ const struct ieee80211_tpt_blink *blink_table,
+ unsigned int blink_table_len);
#endif
/**
* ieee80211_get_tx_led_name - get name of TX LED
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
-static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
return __ieee80211_get_tx_led_name(hw);
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
-static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
return __ieee80211_get_rx_led_name(hw);
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
-static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
return __ieee80211_get_assoc_led_name(hw);
*
* Return: The name of the LED trigger. %NULL if not configured for LEDs.
*/
-static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
{
#ifdef CONFIG_MAC80211_LEDS
return __ieee80211_get_radio_led_name(hw);
*
* Note: This function must be called before ieee80211_register_hw().
*/
-static inline char *
+static inline const char *
ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
const struct ieee80211_tpt_blink *blink_table,
unsigned int blink_table_len)
void ieee80211_aes_cmac_calculate_k1_k2(struct ieee80211_key_conf *keyconf,
u8 *k1, u8 *k2);
-/**
- * struct ieee80211_key_seq - key sequence counter
- *
- * @tkip: TKIP data, containing IV32 and IV16 in host byte order
- * @ccmp: PN data, most significant byte first (big endian,
- * reverse order than in packet)
- * @aes_cmac: PN data, most significant byte first (big endian,
- * reverse order than in packet)
- * @aes_gmac: PN data, most significant byte first (big endian,
- * reverse order than in packet)
- * @gcmp: PN data, most significant byte first (big endian,
- * reverse order than in packet)
- */
-struct ieee80211_key_seq {
- union {
- struct {
- u32 iv32;
- u16 iv16;
- } tkip;
- struct {
- u8 pn[6];
- } ccmp;
- struct {
- u8 pn[6];
- } aes_cmac;
- struct {
- u8 pn[6];
- } aes_gmac;
- struct {
- u8 pn[6];
- } gcmp;
- };
-};
-
/**
* ieee80211_get_key_tx_seq - get key TX sequence counter
*
projects / karo-tx-linux.git / blobdiff