mpc85xx: Add reginfo command

[karo-tx-uboot.git] / include / post.h

diff --git a/include/post.h b/include/post.h
index a91baa277a44abddc64160a1503072a21bed6449..3da959d9a35cd13c7f5f36dd57e7155ed81fd85b 100644 (file)
--- a/include/post.h
+++ b/include/post.h
@@ -30,22 +30,34 @@
 #ifdef CONFIG_POST
 
 #define POST_POWERON           0x01    /* test runs on power-on booting */
-#define POST_POWERNORMAL       0x02    /* test runs on normal booting */
-#define POST_POWERFAIL         0x04    /* test runs on power-fail booting */
+#define POST_NORMAL            0x02    /* test runs on normal booting */
+#define POST_SLOWTEST          0x04    /* test is slow, enabled by key press */
 #define POST_POWERTEST         0x08    /* test runs after watchdog reset */
 
+#define POST_COLDBOOT          0x80    /* first boot after power-on */
+
 #define POST_ROM               0x0100  /* test runs in ROM */
 #define POST_RAM               0x0200  /* test runs in RAM */
 #define POST_MANUAL            0x0400  /* test runs on diag command */
 #define POST_REBOOT            0x0800  /* test may cause rebooting */
 #define POST_PREREL             0x1000  /* test runs before relocation */
 
+#define POST_CRITICAL          0x2000  /* Use failbootcmd if test failed */
+#define POST_STOP              0x4000  /* Interrupt POST sequence on fail */
+
 #define POST_MEM               (POST_RAM | POST_ROM)
-#define POST_ALWAYS            (POST_POWERNORMAL | \
-                                POST_POWERFAIL   | \
-                                POST_MANUAL      | \
+#define POST_ALWAYS            (POST_NORMAL    | \
+                                POST_SLOWTEST  | \
+                                POST_MANUAL    | \
                                 POST_POWERON   )
 
+#define POST_FAIL_SAVE         0x80
+
+#define POST_BEFORE            1
+#define POST_AFTER             0
+#define POST_PASSED            1
+#define POST_FAILED            0
+
 #ifndef        __ASSEMBLY__
 
 struct post_test {
@@ -54,8 +66,11 @@ struct post_test {
        char *desc;
        int flags;
        int (*test) (int flags);
+       int (*init_f) (void);
+       void (*reloc) (void);
        unsigned long testid;
 };
+int post_init_f (void);
 void post_bootmode_init (void);
 int post_bootmode_get (unsigned int * last_test);
 void post_bootmode_clear (void);
@@ -63,24 +78,53 @@ void post_output_backlog ( void );
 int post_run (char *name, int flags);
 int post_info (char *name);
 int post_log (char *format, ...);
+#ifndef CONFIG_RELOC_FIXUP_WORKS
 void post_reloc (void);
+#endif
+unsigned long post_time_ms (unsigned long base);
 
 extern struct post_test post_list[];
 extern unsigned int post_list_size;
+extern int post_hotkeys_pressed(void);
 
+/*
+ *  If GCC is configured to use a version of GAS that supports
+ * the .gnu_attribute directive, it will use that directive to
+ * record certain properties of the output code.
+ *  This feature is new to GCC 4.3.0.
+ *  .gnu_attribute is new to GAS 2.18.
+ */
+#if (__GNUC__ >= 4 && __GNUC_MINOR__ >= 3)
+/* Tag_GNU_Power_ABI_FP/soft-float */
+#define GNU_FPOST_ATTR asm(".gnu_attribute     4, 2");
+#else
+#define GNU_FPOST_ATTR
+#endif /* __GNUC__ */
 #endif /* __ASSEMBLY__ */
 
-#define CFG_POST_RTC           0x00000001
-#define CFG_POST_WATCHDOG      0x00000002
-#define CFG_POST_MEMORY                0x00000004
-#define CFG_POST_CPU           0x00000008
-#define CFG_POST_I2C           0x00000010
-#define CFG_POST_CACHE         0x00000020
-#define CFG_POST_UART          0x00000040
-#define CFG_POST_ETHER         0x00000080
-#define CFG_POST_SPI           0x00000100
-#define CFG_POST_USB           0x00000200
-#define CFG_POST_SPR           0x00000400
+#define CONFIG_SYS_POST_RTC            0x00000001
+#define CONFIG_SYS_POST_WATCHDOG       0x00000002
+#define CONFIG_SYS_POST_MEMORY         0x00000004
+#define CONFIG_SYS_POST_CPU            0x00000008
+#define CONFIG_SYS_POST_I2C            0x00000010
+#define CONFIG_SYS_POST_CACHE          0x00000020
+#define CONFIG_SYS_POST_UART           0x00000040
+#define CONFIG_SYS_POST_ETHER          0x00000080
+#define CONFIG_SYS_POST_SPI            0x00000100
+#define CONFIG_SYS_POST_USB            0x00000200
+#define CONFIG_SYS_POST_SPR            0x00000400
+#define CONFIG_SYS_POST_SYSMON         0x00000800
+#define CONFIG_SYS_POST_DSP            0x00001000
+#define CONFIG_SYS_POST_OCM            0x00002000
+#define CONFIG_SYS_POST_FPU            0x00004000
+#define CONFIG_SYS_POST_ECC            0x00008000
+#define CONFIG_SYS_POST_BSPEC1         0x00010000
+#define CONFIG_SYS_POST_BSPEC2         0x00020000
+#define CONFIG_SYS_POST_BSPEC3         0x00040000
+#define CONFIG_SYS_POST_BSPEC4         0x00080000
+#define CONFIG_SYS_POST_BSPEC5         0x00100000
+#define CONFIG_SYS_POST_CODEC          0x00200000
+#define CONFIG_SYS_POST_COPROC         0x00400000
 
 #endif /* CONFIG_POST */