/*----------------------------------------------------------------------------+
+| This source code is dual-licensed. You may use it under the terms of the
+| GNU General Public License version 2, or under the license below.
|
| This source code has been made available to you by IBM on an AS-IS
| basis. Anyone receiving this source is licensed under IBM
#ifndef __PPC440_H__
#define __PPC440_H__
-#define CFG_DCACHE_SIZE (32 << 10) /* For AMCC 440 CPUs */
-
-/*--------------------------------------------------------------------- */
-/* Special Purpose Registers */
-/*--------------------------------------------------------------------- */
-#define xer_reg 0x001
-#define lr_reg 0x008
-#define dec 0x016 /* decrementer */
-#define srr0 0x01a /* save/restore register 0 */
-#define srr1 0x01b /* save/restore register 1 */
-#define pid 0x030 /* process id */
-#define decar 0x036 /* decrementer auto-reload */
-#define csrr0 0x03a /* critical save/restore register 0 */
-#define csrr1 0x03b /* critical save/restore register 1 */
-#define dear 0x03d /* data exception address register */
-#define esr 0x03e /* exception syndrome register */
-#define ivpr 0x03f /* interrupt prefix register */
-#define usprg0 0x100 /* user special purpose register general 0 */
-#define usprg1 0x110 /* user special purpose register general 1 */
-#define tblr 0x10c /* time base lower, read only */
-#define tbur 0x10d /* time base upper, read only */
-#define sprg1 0x111 /* special purpose register general 1 */
-#define sprg2 0x112 /* special purpose register general 2 */
-#define sprg3 0x113 /* special purpose register general 3 */
-#define sprg4 0x114 /* special purpose register general 4 */
-#define sprg5 0x115 /* special purpose register general 5 */
-#define sprg6 0x116 /* special purpose register general 6 */
-#define sprg7 0x117 /* special purpose register general 7 */
-#define tbl 0x11c /* time base lower (supervisor)*/
-#define tbu 0x11d /* time base upper (supervisor)*/
-#define pir 0x11e /* processor id register */
-/*#define pvr 0x11f processor version register */
-#define dbsr 0x130 /* debug status register */
-#define dbcr0 0x134 /* debug control register 0 */
-#define dbcr1 0x135 /* debug control register 1 */
-#define dbcr2 0x136 /* debug control register 2 */
-#define iac1 0x138 /* instruction address compare 1 */
-#define iac2 0x139 /* instruction address compare 2 */
-#define iac3 0x13a /* instruction address compare 3 */
-#define iac4 0x13b /* instruction address compare 4 */
-#define dac1 0x13c /* data address compare 1 */
-#define dac2 0x13d /* data address compare 2 */
-#define dvc1 0x13e /* data value compare 1 */
-#define dvc2 0x13f /* data value compare 2 */
-#define tsr 0x150 /* timer status register */
-#define tcr 0x154 /* timer control register */
-#define ivor0 0x190 /* interrupt vector offset register 0 */
-#define ivor1 0x191 /* interrupt vector offset register 1 */
-#define ivor2 0x192 /* interrupt vector offset register 2 */
-#define ivor3 0x193 /* interrupt vector offset register 3 */
-#define ivor4 0x194 /* interrupt vector offset register 4 */
-#define ivor5 0x195 /* interrupt vector offset register 5 */
-#define ivor6 0x196 /* interrupt vector offset register 6 */
-#define ivor7 0x197 /* interrupt vector offset register 7 */
-#define ivor8 0x198 /* interrupt vector offset register 8 */
-#define ivor9 0x199 /* interrupt vector offset register 9 */
-#define ivor10 0x19a /* interrupt vector offset register 10 */
-#define ivor11 0x19b /* interrupt vector offset register 11 */
-#define ivor12 0x19c /* interrupt vector offset register 12 */
-#define ivor13 0x19d /* interrupt vector offset register 13 */
-#define ivor14 0x19e /* interrupt vector offset register 14 */
-#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440)
-#define mcsrr0 0x23a /* machine check save/restore register 0 */
-#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
-#define mcsr 0x23c /* machine check status register */
-#endif
-#define inv0 0x370 /* instruction cache normal victim 0 */
-#define inv1 0x371 /* instruction cache normal victim 1 */
-#define inv2 0x372 /* instruction cache normal victim 2 */
-#define inv3 0x373 /* instruction cache normal victim 3 */
-#define itv0 0x374 /* instruction cache transient victim 0 */
-#define itv1 0x375 /* instruction cache transient victim 1 */
-#define itv2 0x376 /* instruction cache transient victim 2 */
-#define itv3 0x377 /* instruction cache transient victim 3 */
-#define dnv0 0x390 /* data cache normal victim 0 */
-#define dnv1 0x391 /* data cache normal victim 1 */
-#define dnv2 0x392 /* data cache normal victim 2 */
-#define dnv3 0x393 /* data cache normal victim 3 */
-#define dtv0 0x394 /* data cache transient victim 0 */
-#define dtv1 0x395 /* data cache transient victim 1 */
-#define dtv2 0x396 /* data cache transient victim 2 */
-#define dtv3 0x397 /* data cache transient victim 3 */
-#define dvlim 0x398 /* data cache victim limit */
-#define ivlim 0x399 /* instruction cache victim limit */
-#define rstcfg 0x39b /* reset configuration */
-#define dcdbtrl 0x39c /* data cache debug tag register low */
-#define dcdbtrh 0x39d /* data cache debug tag register high */
-#define icdbtrl 0x39e /* instruction cache debug tag register low */
-#define icdbtrh 0x39f /* instruction cache debug tag register high */
-#define mmucr 0x3b2 /* mmu control register */
-#define ccr0 0x3b3 /* core configuration register 0 */
-#define ccr1 0x378 /* core configuration for 440x5 only */
-#define icdbdr 0x3d3 /* instruction cache debug data register */
-#define dbdr 0x3f3 /* debug data register */
+#define CONFIG_SYS_DCACHE_SIZE (32 << 10) /* For AMCC 440 CPUs */
/******************************************************************************
* DCRs & Related
| Clocking Controller
+----------------------------------------------------------------------------*/
/* values for clkcfga register - indirect addressing of these regs */
-#define clk_clkukpd 0x0020
-#define clk_pllc 0x0040
-#define clk_plld 0x0060
-#define clk_primad 0x0080
-#define clk_primbd 0x00a0
-#define clk_opbd 0x00c0
-#define clk_perd 0x00e0
-#define clk_mald 0x0100
-#define clk_spcid 0x0120
-#define clk_icfg 0x0140
+#define CPR0_PLLC 0x0040
+#define CPR0_PLLD 0x0060
+#define CPR0_PRIMAD 0x0080
+#define CPR0_PRIMBD 0x00a0
+#define CPR0_OPBD 0x00c0
+#define CPR0_PERD 0x00e0
+#define CPR0_MALD 0x0100
+#define CPR0_SPCID 0x0120
+#define CPR0_ICFG 0x0140
/* 440gx sdr register definations */
-#define sdr_sdstp0 0x0020 /* */
-#define sdr_sdstp1 0x0021 /* */
-#define SDR_PINSTP 0x0040
-#define sdr_sdcs 0x0060
-#define sdr_ecid0 0x0080
-#define sdr_ecid1 0x0081
-#define sdr_ecid2 0x0082
-#define sdr_jtag 0x00c0
-#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
-#define sdr_ddrdl 0x00e0
+#define SDR0_SDSTP0 0x0020 /* */
+#define SDR0_SDSTP1 0x0021 /* */
+#define SDR0_PINSTP 0x0040
+#define SDR0_SDCS0 0x0060
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_DDRCFG 0x00e0
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
+#define SDR0_EBC 0x0100
+#define SDR0_UART0 0x0120 /* UART0 Config */
+#define SDR0_UART1 0x0121 /* UART1 Config */
+#define SDR0_UART2 0x0122 /* UART2 Config */
+#define SDR0_UART3 0x0123 /* UART3 Config */
+#define SDR0_CP440 0x0180
+#define SDR0_XCR 0x01c0
+#define SDR0_XPLLC 0x01c1
+#define SDR0_XPLLD 0x01c2
+#define SDR0_SRST 0x0200
+#define SD0_AMP0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */
+#define SD0_AMP1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#define SDR0_PCI0 0x01c0
#else
-#define sdr_cfg 0x00e0
-#define SDR_CFG_LT2_MASK 0x01000000 /* Leakage test 2*/
-#define SDR_CFG_64_32BITS_MASK 0x01000000 /* Switch DDR 64 bits or 32 bits */
-#define SDR_CFG_32BITS 0x00000000 /* 32 bits */
-#define SDR_CFG_64BITS 0x01000000 /* 64 bits */
-#define SDR_CFG_MC_V2518_MASK 0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
-#define SDR_CFG_MC_V25 0x00000000 /* 2.5 V */
-#define SDR_CFG_MC_V18 0x02000000 /* 1.8 V */
-#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
-#define sdr_ebc 0x0100
-#define sdr_uart0 0x0120 /* UART0 Config */
-#define sdr_uart1 0x0121 /* UART1 Config */
-#define sdr_uart2 0x0122 /* UART2 Config */
-#define sdr_uart3 0x0123 /* UART3 Config */
-#define sdr_cp440 0x0180
-#define sdr_xcr 0x01c0
-#define sdr_xpllc 0x01c1
-#define sdr_xplld 0x01c2
-#define sdr_srst 0x0200
-#define sdr_slpipe 0x0220
-#define sdr_amp0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */
-#define sdr_amp1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */
-#define sdr_mirq0 0x0260
-#define sdr_mirq1 0x0261
-#define sdr_maltbl 0x0280
-#define sdr_malrbl 0x02a0
-#define sdr_maltbs 0x02c0
-#define sdr_malrbs 0x02e0
-#define sdr_pci0 0x0300
-#define sdr_usb0 0x0320
-#define sdr_cust0 0x4000
-#define sdr_cust1 0x4002
-#define sdr_pfc0 0x4100 /* Pin Function 0 */
-#define sdr_pfc1 0x4101 /* Pin Function 1 */
-#define sdr_plbtr 0x4200
-#define sdr_mfr 0x4300 /* SDR0_MFR reg */
+#define SDR0_PCI0 0x0300
+#endif
+#define SDR0_USB0 0x0320
+#define SDR0_CUST0 0x4000
+#define SDR0_CUST1 0x4002
+#define SDR0_PFC0 0x4100 /* Pin Function 0 */
+#define SDR0_PFC1 0x4101 /* Pin Function 1 */
+#define SDR0_MFR 0x4300 /* SDR0_MFR reg */
#ifdef CONFIG_440GX
-#define sdr_amp 0x0240
-#define sdr_xpllc 0x01c1
-#define sdr_xplld 0x01c2
-#define sdr_xcr 0x01c0
-#define sdr_sdstp2 0x4001
-#define sdr_sdstp3 0x4003
+#define SD0_AMP 0x0240
+#define SDR0_XPLLC 0x01c1
+#define SDR0_XPLLD 0x01c2
+#define SDR0_XCR 0x01c0
+#define SDR0_SDSTP2 0x4001
+#define SDR0_SDSTP3 0x4003
#endif /* CONFIG_440GX */
/*----------------------------------------------------------------------------+
#define MMUCR_STID_MASK 0x000000FF
#ifdef CONFIG_440SPE
-#undef sdr_sdstp2
-#define sdr_sdstp2 0x0022
-#undef sdr_sdstp3
-#define sdr_sdstp3 0x0023
-#define sdr_ddr0 0x00E1
-#define sdr_uart2 0x0122
-#define sdr_xcr0 0x01c0
-/* #define sdr_xcr1 0x01c3 only one PCIX - SG */
-/* #define sdr_xcr2 0x01c6 only one PCIX - SG */
-#define sdr_xpllc0 0x01c1
-#define sdr_xplld0 0x01c2
-#define sdr_xpllc1 0x01c4 /*notRCW - SG */
-#define sdr_xplld1 0x01c5 /*notRCW - SG */
-#define sdr_xpllc2 0x01c7 /*notRCW - SG */
-#define sdr_xplld2 0x01c8 /*notRCW - SG */
-#define sdr_amp0 0x0240
-#define sdr_amp1 0x0241
-#define sdr_cust2 0x4004
-#define sdr_cust3 0x4006
-#define sdr_sdstp4 0x4001
-#define sdr_sdstp5 0x4003
-#define sdr_sdstp6 0x4005
-#define sdr_sdstp7 0x4007
+#undef SDR0_SDSTP2
+#define SDR0_SDSTP2 0x0022
+#undef SDR0_SDSTP3
+#define SDR0_SDSTP3 0x0023
+#define SDR0_DDR0 0x00E1
+#define SDR0_UART2 0x0122
+#define SDR0_XCR0 0x01c0
+#define SDR0_XCR1 0x01c3
+#define SDR0_XCR2 0x01c6
+#define SDR0_XPLLC0 0x01c1
+#define SDR0_XPLLD0 0x01c2
+#define SDR0_XPLLC1 0x01c4 /*notRCW - SG */
+#define SDR0_XPLLD1 0x01c5 /*notRCW - SG */
+#define SDR0_XPLLC2 0x01c7 /*notRCW - SG */
+#define SDR0_XPLLD2 0x01c8 /*notRCW - SG */
+#define SD0_AMP0 0x0240
+#define SD0_AMP1 0x0241
+#define SDR0_CUST2 0x4004
+#define SDR0_CUST3 0x4006
+#define SDR0_SDSTP4 0x4001
+#define SDR0_SDSTP5 0x4003
+#define SDR0_SDSTP6 0x4005
+#define SDR0_SDSTP7 0x4007
-/******************************************************************************
- * PCI express defines
- ******************************************************************************/
-#define SDR0_PE0UTLSET1 0x00000300 /* PE0 Upper transaction layer conf setting */
-#define SDR0_PE0UTLSET2 0x00000301 /* PE0 Upper transaction layer conf setting 2 */
-#define SDR0_PE0DLPSET 0x00000302 /* PE0 Data link & logical physical configuration */
-#define SDR0_PE0LOOP 0x00000303 /* PE0 Loopback interface status */
-#define SDR0_PE0RCSSET 0x00000304 /* PE0 Reset, clock & shutdown setting */
-#define SDR0_PE0RCSSTS 0x00000305 /* PE0 Reset, clock & shutdown status */
-#define SDR0_PE0HSSSET1L0 0x00000306 /* PE0 HSS Control Setting 1: Lane 0 */
-#define SDR0_PE0HSSSET2L0 0x00000307 /* PE0 HSS Control Setting 2: Lane 0 */
-#define SDR0_PE0HSSSTSL0 0x00000308 /* PE0 HSS Control Status : Lane 0 */
-#define SDR0_PE0HSSSET1L1 0x00000309 /* PE0 HSS Control Setting 1: Lane 1 */
-#define SDR0_PE0HSSSET2L1 0x0000030A /* PE0 HSS Control Setting 2: Lane 1 */
-#define SDR0_PE0HSSSTSL1 0x0000030B /* PE0 HSS Control Status : Lane 1 */
-#define SDR0_PE0HSSSET1L2 0x0000030C /* PE0 HSS Control Setting 1: Lane 2 */
-#define SDR0_PE0HSSSET2L2 0x0000030D /* PE0 HSS Control Setting 2: Lane 2 */
-#define SDR0_PE0HSSSTSL2 0x0000030E /* PE0 HSS Control Status : Lane 2 */
-#define SDR0_PE0HSSSET1L3 0x0000030F /* PE0 HSS Control Setting 1: Lane 3 */
-#define SDR0_PE0HSSSET2L3 0x00000310 /* PE0 HSS Control Setting 2: Lane 3 */
-#define SDR0_PE0HSSSTSL3 0x00000311 /* PE0 HSS Control Status : Lane 3 */
-#define SDR0_PE0HSSSET1L4 0x00000312 /* PE0 HSS Control Setting 1: Lane 4 */
-#define SDR0_PE0HSSSET2L4 0x00000313 /* PE0 HSS Control Setting 2: Lane 4 */
-#define SDR0_PE0HSSSTSL4 0x00000314 /* PE0 HSS Control Status : Lane 4 */
-#define SDR0_PE0HSSSET1L5 0x00000315 /* PE0 HSS Control Setting 1: Lane 5 */
-#define SDR0_PE0HSSSET2L5 0x00000316 /* PE0 HSS Control Setting 2: Lane 5 */
-#define SDR0_PE0HSSSTSL5 0x00000317 /* PE0 HSS Control Status : Lane 5 */
-#define SDR0_PE0HSSSET1L6 0x00000318 /* PE0 HSS Control Setting 1: Lane 6 */
-#define SDR0_PE0HSSSET2L6 0x00000319 /* PE0 HSS Control Setting 2: Lane 6 */
-#define SDR0_PE0HSSSTSL6 0x0000031A /* PE0 HSS Control Status : Lane 6 */
-#define SDR0_PE0HSSSET1L7 0x0000031B /* PE0 HSS Control Setting 1: Lane 7 */
-#define SDR0_PE0HSSSET2L7 0x0000031C /* PE0 HSS Control Setting 2: Lane 7 */
-#define SDR0_PE0HSSSTSL7 0x0000031D /* PE0 HSS Control Status : Lane 7 */
-#define SDR0_PE0HSSSEREN 0x0000031E /* PE0 Serdes Transmitter Enable */
-#define SDR0_PE0LANEABCD 0x0000031F /* PE0 Lanes ABCD affectation */
-#define SDR0_PE0LANEEFGH 0x00000320 /* PE0 Lanes EFGH affectation */
-
-#define SDR0_PE1UTLSET1 0x00000340 /* PE1 Upper transaction layer conf setting */
-#define SDR0_PE1UTLSET2 0x00000341 /* PE1 Upper transaction layer conf setting 2 */
-#define SDR0_PE1DLPSET 0x00000342 /* PE1 Data link & logical physical configuration */
-#define SDR0_PE1LOOP 0x00000343 /* PE1 Loopback interface status */
-#define SDR0_PE1RCSSET 0x00000344 /* PE1 Reset, clock & shutdown setting */
-#define SDR0_PE1RCSSTS 0x00000345 /* PE1 Reset, clock & shutdown status */
-#define SDR0_PE1HSSSET1L0 0x00000346 /* PE1 HSS Control Setting 1: Lane 0 */
-#define SDR0_PE1HSSSET2L0 0x00000347 /* PE1 HSS Control Setting 2: Lane 0 */
-#define SDR0_PE1HSSSTSL0 0x00000348 /* PE1 HSS Control Status : Lane 0 */
-#define SDR0_PE1HSSSET1L1 0x00000349 /* PE1 HSS Control Setting 1: Lane 1 */
-#define SDR0_PE1HSSSET2L1 0x0000034A /* PE1 HSS Control Setting 2: Lane 1 */
-#define SDR0_PE1HSSSTSL1 0x0000034B /* PE1 HSS Control Status : Lane 1 */
-#define SDR0_PE1HSSSET1L2 0x0000034C /* PE1 HSS Control Setting 1: Lane 2 */
-#define SDR0_PE1HSSSET2L2 0x0000034D /* PE1 HSS Control Setting 2: Lane 2 */
-#define SDR0_PE1HSSSTSL2 0x0000034E /* PE1 HSS Control Status : Lane 2 */
-#define SDR0_PE1HSSSET1L3 0x0000034F /* PE1 HSS Control Setting 1: Lane 3 */
-#define SDR0_PE1HSSSET2L3 0x00000350 /* PE1 HSS Control Setting 2: Lane 3 */
-#define SDR0_PE1HSSSTSL3 0x00000351 /* PE1 HSS Control Status : Lane 3 */
-#define SDR0_PE1HSSSEREN 0x00000352 /* PE1 Serdes Transmitter Enable */
-#define SDR0_PE1LANEABCD 0x00000353 /* PE1 Lanes ABCD affectation */
-#define SDR0_PE2UTLSET1 0x00000370 /* PE2 Upper transaction layer conf setting */
-#define SDR0_PE2UTLSET2 0x00000371 /* PE2 Upper transaction layer conf setting 2 */
-#define SDR0_PE2DLPSET 0x00000372 /* PE2 Data link & logical physical configuration */
-#define SDR0_PE2LOOP 0x00000373 /* PE2 Loopback interface status */
-#define SDR0_PE2RCSSET 0x00000374 /* PE2 Reset, clock & shutdown setting */
-#define SDR0_PE2RCSSTS 0x00000375 /* PE2 Reset, clock & shutdown status */
-#define SDR0_PE2HSSSET1L0 0x00000376 /* PE2 HSS Control Setting 1: Lane 0 */
-#define SDR0_PE2HSSSET2L0 0x00000377 /* PE2 HSS Control Setting 2: Lane 0 */
-#define SDR0_PE2HSSSTSL0 0x00000378 /* PE2 HSS Control Status : Lane 0 */
-#define SDR0_PE2HSSSET1L1 0x00000379 /* PE2 HSS Control Setting 1: Lane 1 */
-#define SDR0_PE2HSSSET2L1 0x0000037A /* PE2 HSS Control Setting 2: Lane 1 */
-#define SDR0_PE2HSSSTSL1 0x0000037B /* PE2 HSS Control Status : Lane 1 */
-#define SDR0_PE2HSSSET1L2 0x0000037C /* PE2 HSS Control Setting 1: Lane 2 */
-#define SDR0_PE2HSSSET2L2 0x0000037D /* PE2 HSS Control Setting 2: Lane 2 */
-#define SDR0_PE2HSSSTSL2 0x0000037E /* PE2 HSS Control Status : Lane 2 */
-#define SDR0_PE2HSSSET1L3 0x0000037F /* PE2 HSS Control Setting 1: Lane 3 */
-#define SDR0_PE2HSSSET2L3 0x00000380 /* PE2 HSS Control Setting 2: Lane 3 */
-#define SDR0_PE2HSSSTSL3 0x00000381 /* PE2 HSS Control Status : Lane 3 */
-#define SDR0_PE2HSSSEREN 0x00000382 /* PE2 Serdes Transmitter Enable */
-#define SDR0_PE2LANEABCD 0x00000383 /* PE2 Lanes ABCD affectation */
-#define SDR0_PEGPLLSET1 0x000003A0 /* PE Pll LC Tank Setting1 */
-#define SDR0_PEGPLLSET2 0x000003A1 /* PE Pll LC Tank Setting2 */
-#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */
#endif /* CONFIG_440SPE */
/*-----------------------------------------------------------------------------
| External Bus Controller
+----------------------------------------------------------------------------*/
-/* values for ebccfga register - indirect addressing of these regs */
-#define pb0cr 0x00 /* periph bank 0 config reg */
-#define pb1cr 0x01 /* periph bank 1 config reg */
-#define pb2cr 0x02 /* periph bank 2 config reg */
-#define pb3cr 0x03 /* periph bank 3 config reg */
-#define pb4cr 0x04 /* periph bank 4 config reg */
-#define pb5cr 0x05 /* periph bank 5 config reg */
-#define pb6cr 0x06 /* periph bank 6 config reg */
-#define pb7cr 0x07 /* periph bank 7 config reg */
-#define pb0ap 0x10 /* periph bank 0 access parameters */
-#define pb1ap 0x11 /* periph bank 1 access parameters */
-#define pb2ap 0x12 /* periph bank 2 access parameters */
-#define pb3ap 0x13 /* periph bank 3 access parameters */
-#define pb4ap 0x14 /* periph bank 4 access parameters */
-#define pb5ap 0x15 /* periph bank 5 access parameters */
-#define pb6ap 0x16 /* periph bank 6 access parameters */
-#define pb7ap 0x17 /* periph bank 7 access parameters */
-#define pbear 0x20 /* periph bus error addr reg */
-#define pbesr 0x21 /* periph bus error status reg */
-#define xbcfg 0x23 /* external bus configuration reg */
+/* values for EBC0_CFGADDR register - indirect addressing of these regs */
+#define PB0CR 0x00 /* periph bank 0 config reg */
+#define PB1CR 0x01 /* periph bank 1 config reg */
+#define PB2CR 0x02 /* periph bank 2 config reg */
+#define PB3CR 0x03 /* periph bank 3 config reg */
+#define PB4CR 0x04 /* periph bank 4 config reg */
+#define PB5CR 0x05 /* periph bank 5 config reg */
+#define PB6CR 0x06 /* periph bank 6 config reg */
+#define PB7CR 0x07 /* periph bank 7 config reg */
+#define PB0AP 0x10 /* periph bank 0 access parameters */
+#define PB1AP 0x11 /* periph bank 1 access parameters */
+#define PB2AP 0x12 /* periph bank 2 access parameters */
+#define PB3AP 0x13 /* periph bank 3 access parameters */
+#define PB4AP 0x14 /* periph bank 4 access parameters */
+#define PB5AP 0x15 /* periph bank 5 access parameters */
+#define PB6AP 0x16 /* periph bank 6 access parameters */
+#define PB7AP 0x17 /* periph bank 7 access parameters */
+#define PBEAR 0x20 /* periph bus error addr reg */
+#define PBESR 0x21 /* periph bus error status reg */
#define EBC0_CFG 0x23 /* external bus configuration reg */
-#define xbcid 0x24 /* external bus core id reg */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-/* PLB4 to PLB3 Bridge OUT */
-#define P4P3_DCR_BASE 0x020
-#define p4p3_esr0_read (P4P3_DCR_BASE+0x0)
-#define p4p3_esr0_write (P4P3_DCR_BASE+0x1)
-#define p4p3_eadr (P4P3_DCR_BASE+0x2)
-#define p4p3_euadr (P4P3_DCR_BASE+0x3)
-#define p4p3_esr1_read (P4P3_DCR_BASE+0x4)
-#define p4p3_esr1_write (P4P3_DCR_BASE+0x5)
-#define p4p3_confg (P4P3_DCR_BASE+0x6)
-#define p4p3_pic (P4P3_DCR_BASE+0x7)
-#define p4p3_peir (P4P3_DCR_BASE+0x8)
-#define p4p3_rev (P4P3_DCR_BASE+0xA)
-
-/* PLB3 to PLB4 Bridge IN */
-#define P3P4_DCR_BASE 0x030
-#define p3p4_esr0_read (P3P4_DCR_BASE+0x0)
-#define p3p4_esr0_write (P3P4_DCR_BASE+0x1)
-#define p3p4_eadr (P3P4_DCR_BASE+0x2)
-#define p3p4_euadr (P3P4_DCR_BASE+0x3)
-#define p3p4_esr1_read (P3P4_DCR_BASE+0x4)
-#define p3p4_esr1_write (P3P4_DCR_BASE+0x5)
-#define p3p4_confg (P3P4_DCR_BASE+0x6)
-#define p3p4_pic (P3P4_DCR_BASE+0x7)
-#define p3p4_peir (P3P4_DCR_BASE+0x8)
-#define p3p4_rev (P3P4_DCR_BASE+0xA)
-
/* PLB3 Arbiter */
-#define PLB3_DCR_BASE 0x070
-#define plb3_revid (PLB3_DCR_BASE+0x2)
-#define plb3_besr (PLB3_DCR_BASE+0x3)
-#define plb3_bear (PLB3_DCR_BASE+0x6)
-#define plb3_acr (PLB3_DCR_BASE+0x7)
+#define PLB3_DCR_BASE 0x070
+#define PLB3_ACR (PLB3_DCR_BASE + 0x7)
/* PLB4 Arbiter - PowerPC440EP Pass1 */
-#define PLB4_DCR_BASE 0x080
-#define plb4_acr (PLB4_DCR_BASE+0x1)
-#define plb4_revid (PLB4_DCR_BASE+0x2)
-#define plb4_besr (PLB4_DCR_BASE+0x4)
-#define plb4_bearl (PLB4_DCR_BASE+0x6)
-#define plb4_bearh (PLB4_DCR_BASE+0x7)
+#define PLB4_DCR_BASE 0x080
+#define PLB4_ACR (PLB4_DCR_BASE + 0x1)
#define PLB4_ACR_WRP (0x80000000 >> 7)
-/* Nebula PLB4 Arbiter - PowerPC440EP */
-#define PLB_ARBITER_BASE 0x80
-
-#define plb0_revid (PLB_ARBITER_BASE+ 0x00)
-#define plb0_acr (PLB_ARBITER_BASE+ 0x01)
-#define plb0_acr_ppm_mask 0xF0000000
-#define plb0_acr_ppm_fixed 0x00000000
-#define plb0_acr_ppm_fair 0xD0000000
-#define plb0_acr_hbu_mask 0x08000000
-#define plb0_acr_hbu_disabled 0x00000000
-#define plb0_acr_hbu_enabled 0x08000000
-#define plb0_acr_rdp_mask 0x06000000
-#define plb0_acr_rdp_disabled 0x00000000
-#define plb0_acr_rdp_2deep 0x02000000
-#define plb0_acr_rdp_3deep 0x04000000
-#define plb0_acr_rdp_4deep 0x06000000
-#define plb0_acr_wrp_mask 0x01000000
-#define plb0_acr_wrp_disabled 0x00000000
-#define plb0_acr_wrp_2deep 0x01000000
-
-#define plb0_besrl (PLB_ARBITER_BASE+ 0x02)
-#define plb0_besrh (PLB_ARBITER_BASE+ 0x03)
-#define plb0_bearl (PLB_ARBITER_BASE+ 0x04)
-#define plb0_bearh (PLB_ARBITER_BASE+ 0x05)
-#define plb0_ccr (PLB_ARBITER_BASE+ 0x08)
-
-#define plb1_acr (PLB_ARBITER_BASE+ 0x09)
-#define plb1_acr_ppm_mask 0xF0000000
-#define plb1_acr_ppm_fixed 0x00000000
-#define plb1_acr_ppm_fair 0xD0000000
-#define plb1_acr_hbu_mask 0x08000000
-#define plb1_acr_hbu_disabled 0x00000000
-#define plb1_acr_hbu_enabled 0x08000000
-#define plb1_acr_rdp_mask 0x06000000
-#define plb1_acr_rdp_disabled 0x00000000
-#define plb1_acr_rdp_2deep 0x02000000
-#define plb1_acr_rdp_3deep 0x04000000
-#define plb1_acr_rdp_4deep 0x06000000
-#define plb1_acr_wrp_mask 0x01000000
-#define plb1_acr_wrp_disabled 0x00000000
-#define plb1_acr_wrp_2deep 0x01000000
-
-#define plb1_besrl (PLB_ARBITER_BASE+ 0x0A)
-#define plb1_besrh (PLB_ARBITER_BASE+ 0x0B)
-#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
-#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
-
/* Pin Function Control Register 1 */
#define SDR0_PFC1 0x4101
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
#endif /* 440EP || 440GR || 440EPX || 440GRX */
-/*-----------------------------------------------------------------------------
- | L2 Cache
- +----------------------------------------------------------------------------*/
-#if defined (CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define L2_CACHE_BASE 0x030
-#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
-#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
-#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */
-#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */
-#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */
-#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
-#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
-#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
-
-#endif /* CONFIG_440GX */
-
-/*-----------------------------------------------------------------------------
- | Internal SRAM
- +----------------------------------------------------------------------------*/
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define ISRAM0_DCR_BASE 0x380
-#else
-#define ISRAM0_DCR_BASE 0x020
-#endif
-#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
-#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
-#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
-#define isram0_sb3cr (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/
-#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
-#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
-#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
-#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
-#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
-#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
-#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
-
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
/*-----------------------------------------------------------------------------
| Clocking, Power Management and Chip Control
+----------------------------------------------------------------------------*/
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
#define CNTRL_DCR_BASE 0x160
#else
#define CNTRL_DCR_BASE 0x0b0
#endif
-#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
-#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
-#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
-
-#define cpc0_sys0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */
-#define cpc0_sys1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */
-#define cpc0_cust0 (CNTRL_DCR_BASE+0x32) /* Customer configuration reg 0 */
-#define cpc0_cust1 (CNTRL_DCR_BASE+0x33) /* Customer configuration reg 1 */
-
-#define cpc0_strp0 (CNTRL_DCR_BASE+0x34) /* Power-on config reg 0 (RO) */
-#define cpc0_strp1 (CNTRL_DCR_BASE+0x35) /* Power-on config reg 1 (RO) */
-#define cpc0_strp2 (CNTRL_DCR_BASE+0x36) /* Power-on config reg 2 (RO) */
-#define cpc0_strp3 (CNTRL_DCR_BASE+0x37) /* Power-on config reg 3 (RO) */
-
-#define cpc0_gpio (CNTRL_DCR_BASE+0x38) /* GPIO config reg (440GP) */
-
-#define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
-#define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
-
-/*-----------------------------------------------------------------------------
- | Universal interrupt controller
- +----------------------------------------------------------------------------*/
-#define UIC_SR 0x0 /* UIC status */
-#define UIC_ER 0x2 /* UIC enable */
-#define UIC_CR 0x3 /* UIC critical */
-#define UIC_PR 0x4 /* UIC polarity */
-#define UIC_TR 0x5 /* UIC triggering */
-#define UIC_MSR 0x6 /* UIC masked status */
-#define UIC_VR 0x7 /* UIC vector */
-#define UIC_VCR 0x8 /* UIC vector configuration */
-
-#define UIC0_DCR_BASE 0xc0
-#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
-#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
-#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */
-#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
-#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
-#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
-#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */
-#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
-
-#define UIC1_DCR_BASE 0xd0
-#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */
-#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */
-#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */
-#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
-#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
-#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
-#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
-#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-
-#if defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UIC2_DCR_BASE 0xe0
-#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
-#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */
-#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
-#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
-#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
-#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
-#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
-#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
-#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
-
-#define UIC3_DCR_BASE 0xf0
-#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
-#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */
-#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */
-#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */
-#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
-#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
-#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
-#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */
-#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_440GX)
-#define UIC2_DCR_BASE 0x210
-#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */
-#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
-#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
-#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
-#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
-#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
-#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
-#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
-
-
-#define UIC_DCR_BASE 0x200
-#define uicb0sr (UIC_DCR_BASE+0x0) /* UIC Base Status Register */
-#define uicb0er (UIC_DCR_BASE+0x2) /* UIC Base enable */
-#define uicb0cr (UIC_DCR_BASE+0x3) /* UIC Base critical */
-#define uicb0pr (UIC_DCR_BASE+0x4) /* UIC Base polarity */
-#define uicb0tr (UIC_DCR_BASE+0x5) /* UIC Base triggering */
-#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */
-#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */
-#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration */
-#endif /* CONFIG_440GX */
-
-/* The following is for compatibility with 405 code */
-#define uicsr uic0sr
-#define uicer uic0er
-#define uiccr uic0cr
-#define uicpr uic0pr
-#define uictr uic0tr
-#define uicmsr uic0msr
-#define uicvr uic0vr
-#define uicvcr uic0vcr
-
-#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX)
-/*----------------------------------------------------------------------------+
-| Clock / Power-on-reset DCR's.
-+----------------------------------------------------------------------------*/
-#define CPR0_CLKUPD 0x20
-#define CPR0_CLKUPD_BSY_MASK 0x80000000
-#define CPR0_CLKUPD_BSY_COMPLETED 0x00000000
-#define CPR0_CLKUPD_BSY_BUSY 0x80000000
-#define CPR0_CLKUPD_CUI_MASK 0x80000000
-#define CPR0_CLKUPD_CUI_DISABLE 0x00000000
-#define CPR0_CLKUPD_CUI_ENABLE 0x80000000
-#define CPR0_CLKUPD_CUD_MASK 0x40000000
-#define CPR0_CLKUPD_CUD_DISABLE 0x00000000
-#define CPR0_CLKUPD_CUD_ENABLE 0x40000000
-
-#define CPR0_PLLC 0x40
-#define CPR0_PLLC_RST_MASK 0x80000000
-#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
-#define CPR0_PLLC_RST_PLLRESET 0x80000000
-#define CPR0_PLLC_ENG_MASK 0x40000000
-#define CPR0_PLLC_ENG_DISABLE 0x00000000
-#define CPR0_PLLC_ENG_ENABLE 0x40000000
-#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
-#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
-#define CPR0_PLLC_SRC_MASK 0x20000000
-#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
-#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
-#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
-#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
-#define CPR0_PLLC_SEL_MASK 0x07000000
-#define CPR0_PLLC_SEL_PLLOUT 0x00000000
-#define CPR0_PLLC_SEL_CPU 0x01000000
-#define CPR0_PLLC_SEL_EBC 0x05000000
-#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
-#define CPR0_PLLC_TUNE_MASK 0x000003FF
-#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-
-#define CPR0_PLLD 0x60
-#define CPR0_PLLD_FBDV_MASK 0x1F000000
-#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
-#define CPR0_PLLD_FWDVA_MASK 0x000F0000
-#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
-#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
-#define CPR0_PLLD_FWDVB_MASK 0x00000700
-#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
-#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
-#define CPR0_PLLD_LFBDV_MASK 0x0000003F
-#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
-#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
-
-#define CPR0_PRIMAD 0x80
-#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
-#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-
-#define CPR0_PRIMBD 0xA0
-#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
-#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-
-#define CPR0_OPBD 0xC0
-#define CPR0_OPBD_OPBDV0_MASK 0x03000000
-#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-
-#define CPR0_PERD 0xE0
-#if !defined(CONFIG_440EPX)
-#define CPR0_PERD_PERDV0_MASK 0x03000000
-#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-#endif
-
-#define CPR0_MALD 0x100
-#define CPR0_MALD_MALDV0_MASK 0x03000000
-#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+#define CPC0_SYS0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */
+#define CPC0_SYS1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */
-#define CPR0_ICFG 0x140
-#define CPR0_ICFG_RLI_MASK 0x80000000
-#define CPR0_ICFG_RLI_RESETCPR 0x00000000
-#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
-#define CPR0_ICFG_ICS_MASK 0x00000007
-#define CPR0_ICFG_ICS_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
-#define CPR0_ICFG_ICS_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
+#define CPC0_STRP0 (CNTRL_DCR_BASE+0x34) /* Power-on config reg 0 (RO) */
+#define CPC0_STRP1 (CNTRL_DCR_BASE+0x35) /* Power-on config reg 1 (RO) */
-/************************/
-/* IIC defines */
-/************************/
-#define IIC0_MMIO_BASE 0xA0000400
-#define IIC1_MMIO_BASE 0xA0000500
+#define CPC0_GPIO (CNTRL_DCR_BASE+0x38) /* GPIO config reg (440GP) */
-#endif /* CONFIG_440SP */
+#define CPC0_CR0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
+#define CPC0_CR1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
/*-----------------------------------------------------------------------------
| DMA
#else
#define DMA_DCR_BASE 0x100
#endif
-#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
-#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
-#define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */
-#define dmasal0 (DMA_DCR_BASE+0x03) /* DMA source address low 0 */
-#define dmadah0 (DMA_DCR_BASE+0x04) /* DMA destination address high 0 */
-#define dmadal0 (DMA_DCR_BASE+0x05) /* DMA destination address low 0 */
-#define dmasgh0 (DMA_DCR_BASE+0x06) /* DMA scatter/gather desc addr high 0 */
-#define dmasgl0 (DMA_DCR_BASE+0x07) /* DMA scatter/gather desc addr low 0 */
-#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
-#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
-#define dmasah1 (DMA_DCR_BASE+0x0a) /* DMA source address high 1 */
-#define dmasal1 (DMA_DCR_BASE+0x0b) /* DMA source address low 1 */
-#define dmadah1 (DMA_DCR_BASE+0x0c) /* DMA destination address high 1 */
-#define dmadal1 (DMA_DCR_BASE+0x0d) /* DMA destination address low 1 */
-#define dmasgh1 (DMA_DCR_BASE+0x0e) /* DMA scatter/gather desc addr high 1 */
-#define dmasgl1 (DMA_DCR_BASE+0x0f) /* DMA scatter/gather desc addr low 1 */
-#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
-#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
-#define dmasah2 (DMA_DCR_BASE+0x12) /* DMA source address high 2 */
-#define dmasal2 (DMA_DCR_BASE+0x13) /* DMA source address low 2 */
-#define dmadah2 (DMA_DCR_BASE+0x14) /* DMA destination address high 2 */
-#define dmadal2 (DMA_DCR_BASE+0x15) /* DMA destination address low 2 */
-#define dmasgh2 (DMA_DCR_BASE+0x16) /* DMA scatter/gather desc addr high 2 */
-#define dmasgl2 (DMA_DCR_BASE+0x17) /* DMA scatter/gather desc addr low 2 */
-#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */
-#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 2 */
-#define dmasah3 (DMA_DCR_BASE+0x1a) /* DMA source address high 2 */
-#define dmasal3 (DMA_DCR_BASE+0x1b) /* DMA source address low 2 */
-#define dmadah3 (DMA_DCR_BASE+0x1c) /* DMA destination address high 2 */
-#define dmadal3 (DMA_DCR_BASE+0x1d) /* DMA destination address low 2 */
-#define dmasgh3 (DMA_DCR_BASE+0x1e) /* DMA scatter/gather desc addr high 2 */
-#define dmasgl3 (DMA_DCR_BASE+0x1f) /* DMA scatter/gather desc addr low 2 */
-#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
-#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
-#define dmaslp (DMA_DCR_BASE+0x25) /* DMA sleep mode register */
-#define dmapol (DMA_DCR_BASE+0x26) /* DMA polarity configuration register */
+#define DMACR0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
+#define DMACT0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
+#define DMACR1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
+#define DMACT1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
+#define DMACR2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
+#define DMACT2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
+#define DMACR3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */
+#define DMASR (DMA_DCR_BASE+0x20) /* DMA status register */
+#define DMASGC (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
/*-----------------------------------------------------------------------------
| Memory Access Layer
+----------------------------------------------------------------------------*/
#define MAL_DCR_BASE 0x180
-#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
-#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
-#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
-#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
-#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
-#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
-#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
-#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
-#define maltxtattrr (MAL_DCR_BASE+0x08) /* TX PLB attribute reg */
-#define maltxbattr (MAL_DCR_BASE+0x09) /* TX descriptor base addr reg */
-#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
-#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
-#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
-#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
-#define malrxtattrr (MAL_DCR_BASE+0x14) /* RX PLB attribute reg */
-#define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */
-#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
-#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
-#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
-#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
-#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
-#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
-#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
-#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
+#define MAL0_CFG (MAL_DCR_BASE + 0x00) /* MAL Config reg */
+#define MAL0_ESR (MAL_DCR_BASE + 0x01) /* Error Status (Read/Clear) */
+#define MAL0_IER (MAL_DCR_BASE + 0x02) /* Interrupt enable */
+#define MAL0_TXCASR (MAL_DCR_BASE + 0x04) /* TX Channel active (set) */
+#define MAL0_TXCARR (MAL_DCR_BASE + 0x05) /* TX Channel active (reset) */
+#define MAL0_TXEOBISR (MAL_DCR_BASE + 0x06) /* TX End of buffer int status */
+#define MAL0_TXDEIR (MAL_DCR_BASE + 0x07) /* TX Descr. Error Int */
+#define MAL0_TXBADDR (MAL_DCR_BASE + 0x09) /* TX descriptor base addr*/
+#define MAL0_RXCASR (MAL_DCR_BASE + 0x10) /* RX Channel active (set) */
+#define MAL0_RXCARR (MAL_DCR_BASE + 0x11) /* RX Channel active (reset) */
+#define MAL0_RXEOBISR (MAL_DCR_BASE + 0x12) /* RX End of buffer int status */
+#define MAL0_RXDEIR (MAL_DCR_BASE + 0x13) /* RX Descr. Error Int */
+#define MAL0_RXBADDR (MAL_DCR_BASE + 0x15) /* RX descriptor base addr */
+#define MAL0_TXCTP0R (MAL_DCR_BASE + 0x20) /* TX 0 Channel table pointer */
+#define MAL0_TXCTP1R (MAL_DCR_BASE + 0x21) /* TX 1 Channel table pointer */
+#define MAL0_TXCTP2R (MAL_DCR_BASE + 0x22) /* TX 2 Channel table pointer */
+#define MAL0_TXCTP3R (MAL_DCR_BASE + 0x23) /* TX 3 Channel table pointer */
+#define MAL0_RXCTP0R (MAL_DCR_BASE + 0x40) /* RX 0 Channel table pointer */
+#define MAL0_RXCTP1R (MAL_DCR_BASE + 0x41) /* RX 1 Channel table pointer */
+#define MAL0_RCBS0 (MAL_DCR_BASE + 0x60) /* RX 0 Channel buffer size */
+#define MAL0_RCBS1 (MAL_DCR_BASE + 0x61) /* RX 1 Channel buffer size */
#if defined(CONFIG_440GX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */
-#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */
-#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg */
-#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table pointer reg */
-#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table pointer reg */
-#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
-#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
-#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */
-#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */
-#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */
+#define MAL0_RXCTP2R (MAL_DCR_BASE + 0x42) /* RX 2 Channel table pointer */
+#define MAL0_RXCTP3R (MAL_DCR_BASE + 0x43) /* RX 3 Channel table pointer */
+#define MAL0_RXCTP8R (MAL_DCR_BASE + 0x48) /* RX 8 Channel table pointer */
+#define MAL0_RXCTP16R (MAL_DCR_BASE + 0x50) /* RX 16 Channel table pointer*/
+#define MAL0_RXCTP24R (MAL_DCR_BASE + 0x58) /* RX 24 Channel table pointer*/
+#define MAL0_RCBS2 (MAL_DCR_BASE + 0x62) /* RX 2 Channel buffer size */
+#define MAL0_RCBS3 (MAL_DCR_BASE + 0x63) /* RX 3 Channel buffer size */
+#define MAL0_RCBS8 (MAL_DCR_BASE + 0x68) /* RX 8 Channel buffer size */
+#define MAL0_RCBS16 (MAL_DCR_BASE + 0x70) /* RX 16 Channel buffer size */
+#define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */
#endif /* CONFIG_440GX */
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 0 interrupts (UIC0)
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440SP)
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI0 inbound message */
-#define UIC_PCRW 0x04000000 /* PCI0 command write register */
-#define UIC_PPM 0x02000000 /* PCI0 power management */
-#define UIC_PVPD 0x01000000 /* PCI0 VPD Access */
-#define UIC_MSI0 0x00800000 /* PCI0 MSI level 0 */
-#define UIC_P1IM 0x00400000 /* PCI1 Inbound Message */
-#define UIC_P1CRW 0x00200000 /* PCI1 command write register */
-#define UIC_P1PM 0x00100000 /* PCI1 power management */
-#define UIC_P1VPD 0x00080000 /* PCI1 VPD Access */
-#define UIC_P1MSI0 0x00040000 /* PCI1 MSI level 0 */
-#define UIC_P2IM 0x00020000 /* PCI2 inbound message */
-#define UIC_P2CRW 0x00010000 /* PCI2 command register write */
-#define UIC_P2PM 0x00008000 /* PCI2 power management */
-#define UIC_P2VPD 0x00004000 /* PCI2 VPD access */
-#define UIC_P2MSI0 0x00002000 /* PCI2 MSI level 0 */
-#define UIC_D0CPF 0x00001000 /* DMA0 command pointer */
-#define UIC_D0CSF 0x00000800 /* DMA0 command status */
-#define UIC_D1CPF 0x00000400 /* DMA1 command pointer */
-#define UIC_D1CSF 0x00000200 /* DMA1 command status */
-#define UIC_I2OID 0x00000100 /* I2O inbound doorbell */
-#define UIC_I2OPLF 0x00000080 /* I2O inbound post list */
-#define UIC_I2O0LL 0x00000040 /* I2O0 low latency PLB write */
-#define UIC_I2O1LL 0x00000020 /* I2O1 low latency PLB write */
-#define UIC_I2O0HB 0x00000010 /* I2O0 high bandwidth PLB write */
-#define UIC_I2O1HB 0x00000008 /* I2O1 high bandwidth PLB write */
-#define UIC_GPTCT 0x00000004 /* GPT count timer */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
-#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
-#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
-#define UIC_MTE 0x00200000 /* MAL TXEOB */
-#define UIC_MRE 0x00100000 /* MAL RXEOB */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_RSVD0 0x00008000 /* Reserved */
-#define UIC_RSVD1 0x00004000 /* Reserved */
-#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
-#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
-#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
-#define UIC_EIR0 0x00000100 /* External interrupt 0 */
-#define UIC_EIR1 0x00000080 /* External interrupt 1 */
-#define UIC_EIR2 0x00000040 /* External interrupt 2 */
-#define UIC_EIR3 0x00000020 /* External interrupt 3 */
-#define UIC_EIR4 0x00000010 /* External interrupt 4 */
-#define UIC_EIR5 0x00000008 /* External interrupt 5 */
-#define UIC_EIR6 0x00000004 /* External interrupt 6 */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_KRD 0x10000000 /* Kasumi Ready for data */
-#define UIC_KDA 0x08000000 /* Kasumi Data Available */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_IIC1 0x01000000 /* IIC */
-#define UIC_SPI 0x00800000 /* SPI */
-#define UIC_EPCISER 0x00400000 /* External PCI SERR */
-#define UIC_MTE 0x00200000 /* MAL TXEOB */
-#define UIC_MRE 0x00100000 /* MAL RXEOB */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_UD0 0x00008000 /* UDMA irq 0 */
-#define UIC_UD1 0x00004000 /* UDMA irq 1 */
-#define UIC_UD2 0x00002000 /* UDMA irq 2 */
-#define UIC_UD3 0x00001000 /* UDMA irq 3 */
-#define UIC_HSB2D 0x00000800 /* USB2.0 Device */
-#define UIC_OHCI1 0x00000400 /* USB2.0 Host OHCI irq 1 */
-#define UIC_OHCI2 0x00000200 /* USB2.0 Host OHCI irq 2 */
-#define UIC_EIP94 0x00000100 /* Security EIP94 */
-#define UIC_ETH0 0x00000080 /* Emac 0 */
-#define UIC_ETH1 0x00000040 /* Emac 1 */
-#define UIC_EHCI 0x00000020 /* USB2.0 Host EHCI */
-#define UIC_EIR4 0x00000010 /* External interrupt 4 */
-#define UIC_UIC2NC 0x00000008 /* UIC2 non-critical interrupt */
-#define UIC_UIC2C 0x00000004 /* UIC2 critical interrupt */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-
-/* For compatibility with 405 code */
-#define UIC_MAL_TXEOB UIC_MTE
-#define UIC_MAL_RXEOB UIC_MRE
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define UIC_RSVD0 0x80000000 /* N/A - unused */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_PCIVPD 0x01000000 /* PCI VPD */
-#define UIC_MSI0 0x00800000 /* PCI MSI level 0 */
-#define UIC_EIR0 0x00400000 /* External interrupt 0 */
-#define UIC_UIC2NC 0x00200000 /* UIC2 non-critical interrupt */
-#define UIC_UIC2C 0x00100000 /* UIC2 critical interrupt */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_UIC3NC 0x00008000 /* UIC3 non-critical interrupt */
-#define UIC_UIC3C 0x00004000 /* UIC3 critical interrupt */
-#define UIC_EIR1 0x00002000 /* External interrupt 1 */
-#define UIC_TRNGDA 0x00001000 /* TRNG data available */
-#define UIC_PKAR1 0x00000800 /* PKA ready (PKA[1]) */
-#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */
-#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */
-#define UIC_I2OID 0x00000100 /* I2O inbound door bell */
-#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */
-#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */
-#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */
-#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */
-#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */
-#define UIC_EIP94 0x00000004 /* Security EIP94 */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-
-#elif !defined(CONFIG_440SPE)
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
-#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
-#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
-#define UIC_MTE 0x00200000 /* MAL TXEOB */
-#define UIC_MRE 0x00100000 /* MAL RXEOB */
-#define UIC_D0 0x00080000 /* DMA channel 0 */
-#define UIC_D1 0x00040000 /* DMA channel 1 */
-#define UIC_D2 0x00020000 /* DMA channel 2 */
-#define UIC_D3 0x00010000 /* DMA channel 3 */
-#define UIC_RSVD0 0x00008000 /* Reserved */
-#define UIC_RSVD1 0x00004000 /* Reserved */
-#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
-#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
-#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
-#define UIC_EIR0 0x00000100 /* External interrupt 0 */
-#define UIC_EIR1 0x00000080 /* External interrupt 1 */
-#define UIC_EIR2 0x00000040 /* External interrupt 2 */
-#define UIC_EIR3 0x00000020 /* External interrupt 3 */
-#define UIC_EIR4 0x00000010 /* External interrupt 4 */
-#define UIC_EIR5 0x00000008 /* External interrupt 5 */
-#define UIC_EIR6 0x00000004 /* External interrupt 6 */
-#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
-#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
-#endif /* CONFIG_440GX */
-
-/* For compatibility with 405 code */
-#define UIC_MAL_TXEOB UIC_MTE
-#define UIC_MAL_RXEOB UIC_MRE
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 1 interrupts (UIC1)
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440SP)
-#define UIC_EIR0 0x80000000 /* External interrupt 0 */
-#define UIC_MS 0x40000000 /* MAL SERR */
-#define UIC_MTDE 0x20000000 /* MAL TXDE */
-#define UIC_MRDE 0x10000000 /* MAL RXDE */
-#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_MTE 0x02000000 /* MAL TXEOB */
-#define UIC_MRE 0x01000000 /* MAL RXEOB */
-#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */
-#define UIC_P1MSI1 0x00400000 /* PCI1 MSI level 1 */
-#define UIC_P2MSI1 0x00200000 /* PCI2 MSI level 1 */
-#define UIC_L2C 0x00100000 /* L2 cache */
-#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
-#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
-#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
-#define UIC_EIR1 0x00004000 /* External interrupt 1 */
-#define UIC_EIR2 0x00002000 /* External interrupt 2 */
-#define UIC_EIR3 0x00001000 /* External interrupt 3 */
-#define UIC_EIR4 0x00000800 /* External interrupt 4 */
-#define UIC_EIR5 0x00000400 /* External interrupt 5 */
-#define UIC_DMAE 0x00000200 /* DMA error */
-#define UIC_I2OE 0x00000100 /* I2O error */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */
-#define UIC_P1AE 0x00000020 /* PCI1 asynchronous error */
-#define UIC_P2AE 0x00000010 /* PCI2 asynchronous error */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* Reserved */
-#define UIC_XOR 0x00000001 /* XOR */
-#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
-#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
-#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
-#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
-#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
-#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
-#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
-#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
-#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
-#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
-#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
-#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
-#define UIC_PPMI 0x00004000 /* PPM interrupt status */
-#define UIC_EIR7 0x00002000 /* External interrupt 7 */
-#define UIC_EIR8 0x00001000 /* External interrupt 8 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_EIR10 0x00000400 /* External interrupt 10 */
-#define UIC_EIR11 0x00000200 /* External interrupt 11 */
-#define UIC_EIR12 0x00000100 /* External interrupt 12 */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_RSVD2 0x00000040 /* Reserved */
-#define UIC_RSVD3 0x00000020 /* Reserved */
-#define UIC_PAE 0x00000010 /* PCI asynchronous error */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* Ethernet 1 */
-#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define UIC_EIR2 0x80000000 /* External interrupt 2 */
-#define UIC_U0 0x40000000 /* UART 0 */
-#define UIC_SPI 0x20000000 /* SPI */
-#define UIC_TRNGAL 0x10000000 /* TRNG alarm */
-#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_NDFC 0x02000000 /* NDFC */
-#define UIC_EIPPKPSE 0x01000000 /* EIPPKP slave error */
-#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */
-#define UIC_P0MSI2 0x00400000 /* PCI0 MSI level 2 */
-#define UIC_P0MSI3 0x00200000 /* PCI0 MSI level 3 */
-#define UIC_L2C 0x00100000 /* L2 cache */
-#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
-#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
-#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
-#define UIC_CT5 0x00004000 /* GPT compare timer 5 */
-#define UIC_CT6 0x00002000 /* GPT compare timer 6 */
-#define UIC_GPTDC 0x00001000 /* GPT decrementer pulse */
-#define UIC_EIR3 0x00000800 /* External interrupt 3 */
-#define UIC_EIR4 0x00000400 /* External interrupt 4 */
-#define UIC_DMAE 0x00000200 /* DMA error */
-#define UIC_I2OE 0x00000100 /* I2O error */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */
-#define UIC_EIR5 0x00000020 /* External interrupt 5 */
-#define UIC_EIR6 0x00000010 /* External interrupt 6 */
-#define UIC_U2 0x00000008 /* UART 2 */
-#define UIC_U3 0x00000004 /* UART 3 */
-#define UIC_EIR7 0x00000002 /* External interrupt 7 */
-#define UIC_EIR8 0x00000001 /* External interrupt 8 */
-
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_U2 0x10000000 /* UART 2 */
-#define UIC_U3 0x08000000 /* UART 3 */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_NDFC 0x02000000 /* NDFC */
-#define UIC_KSLE 0x01000000 /* KASUMI slave error */
-#define UIC_CT5 0x00800000 /* GPT compare timer 5 */
-#define UIC_CT6 0x00400000 /* GPT compare timer 6 */
-#define UIC_PLB34I0 0x00200000 /* PLB3X4X MIRQ0 */
-#define UIC_PLB34I1 0x00100000 /* PLB3X4X MIRQ1 */
-#define UIC_PLB34I2 0x00080000 /* PLB3X4X MIRQ2 */
-#define UIC_PLB34I3 0x00040000 /* PLB3X4X MIRQ3 */
-#define UIC_PLB34I4 0x00020000 /* PLB3X4X MIRQ4 */
-#define UIC_PLB34I5 0x00010000 /* PLB3X4X MIRQ5 */
-#define UIC_CT0 0x00008000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00004000 /* GPT compare timer 1 */
-#define UIC_EIR7 0x00002000 /* External interrupt 7 */
-#define UIC_EIR8 0x00001000 /* External interrupt 8 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_CT2 0x00000400 /* GPT compare timer 2 */
-#define UIC_CT3 0x00000200 /* GPT compare timer 3 */
-#define UIC_CT4 0x00000100 /* GPT compare timer 4 */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_GPTDC 0x00000040 /* GPT decrementer pulse */
-#define UIC_RSVD0 0x00000020 /* Reserved */
-#define UIC_EPCIPER 0x00000010 /* External PCI PERR */
-#define UIC_EIR0 0x00000008 /* External interrupt 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_EIR1 0x00000002 /* External interrupt 1 */
-#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
-
-/* For compatibility with 405 code */
-#define UIC_MAL_SERR UIC_MS
-#define UIC_MAL_TXDE UIC_MTDE
-#define UIC_MAL_RXDE UIC_MRDE
-#define UIC_ENET UIC_ETH0
-
-#elif !defined(CONFIG_440SPE)
-#define UIC_MS 0x80000000 /* MAL SERR */
-#define UIC_MTDE 0x40000000 /* MAL TXDE */
-#define UIC_MRDE 0x20000000 /* MAL RXDE */
-#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
-#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
-#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
-#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
-#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
-#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
-#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
-#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
-#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
-#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
-#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
-#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
-#define UIC_PPMI 0x00004000 /* PPM interrupt status */
-#define UIC_EIR7 0x00002000 /* External interrupt 7 */
-#define UIC_EIR8 0x00001000 /* External interrupt 8 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_EIR10 0x00000400 /* External interrupt 10 */
-#define UIC_EIR11 0x00000200 /* External interrupt 11 */
-#define UIC_EIR12 0x00000100 /* External interrupt 12 */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_RSVD2 0x00000040 /* Reserved */
-#define UIC_RSVD3 0x00000020 /* Reserved */
-#define UIC_PAE 0x00000010 /* PCI asynchronous error */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* Ethernet 1 */
-#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
-#endif /* CONFIG_440SP */
-
-/* For compatibility with 405 code */
-#define UIC_MAL_SERR UIC_MS
-#define UIC_MAL_TXDE UIC_MTDE
-#define UIC_MAL_RXDE UIC_MRDE
-#define UIC_ENET UIC_ETH0
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 2 interrupts (UIC2)
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX)
-#define UIC_ETH2 0x80000000 /* Ethernet 2 */
-#define UIC_EWU2 0x40000000 /* Ethernet 2 wakeup */
-#define UIC_ETH3 0x20000000 /* Ethernet 3 */
-#define UIC_EWU3 0x10000000 /* Ethernet 3 wakeup */
-#define UIC_TAH0 0x08000000 /* TAH 0 */
-#define UIC_TAH1 0x04000000 /* TAH 1 */
-#define UIC_IMUOBFQ 0x02000000 /* IMU outbound free queue */
-#define UIC_IMUIBPQ 0x01000000 /* IMU inbound post queue */
-#define UIC_IMUIRQDB 0x00800000 /* IMU irq doorbell */
-#define UIC_IMUIBDB 0x00400000 /* IMU inbound doorbell */
-#define UIC_IMUMSG0 0x00200000 /* IMU inbound message 0 */
-#define UIC_IMUMSG1 0x00100000 /* IMU inbound message 1 */
-#define UIC_IMUTO 0x00080000 /* IMU timeout */
-#define UIC_MSI12 0x00040000 /* PCI MSI level 12 */
-#define UIC_MSI13 0x00020000 /* PCI MSI level 13 */
-#define UIC_MSI14 0x00010000 /* PCI MSI level 14 */
-#define UIC_MSI15 0x00008000 /* PCI MSI level 15 */
-#define UIC_EIR13 0x00004000 /* External interrupt 13 */
-#define UIC_EIR14 0x00002000 /* External interrupt 14 */
-#define UIC_EIR15 0x00001000 /* External interrupt 15 */
-#define UIC_EIR16 0x00000800 /* External interrupt 16 */
-#define UIC_EIR17 0x00000400 /* External interrupt 17 */
-#define UIC_PCIVPD 0x00000200 /* PCI VPD */
-#define UIC_L2C 0x00000100 /* L2 Cache */
-#define UIC_ETH2PCS 0x00000080 /* Ethernet 2 PCS */
-#define UIC_ETH3PCS 0x00000040 /* Ethernet 3 PCS */
-#define UIC_RSVD26 0x00000020 /* Reserved */
-#define UIC_RSVD27 0x00000010 /* Reserved */
-#define UIC_RSVD28 0x00000008 /* Reserved */
-#define UIC_RSVD29 0x00000004 /* Reserved */
-#define UIC_RSVD30 0x00000002 /* Reserved */
-#define UIC_RSVD31 0x00000001 /* Reserved */
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define UIC_TAH0 0x80000000 /* TAHOE 0 */
-#define UIC_TAH1 0x40000000 /* TAHOE 1 */
-#define UIC_EIR9 0x20000000 /* External interrupt 9 */
-#define UIC_MS 0x10000000 /* MAL SERR */
-#define UIC_MTDE 0x08000000 /* MAL TXDE */
-#define UIC_MRDE 0x04000000 /* MAL RXDE */
-#define UIC_MTE 0x02000000 /* MAL TXEOB */
-#define UIC_MRE 0x01000000 /* MAL RXEOB */
-#define UIC_MCTX0 0x00800000 /* MAL interrupt coalescence TX0 */
-#define UIC_MCTX1 0x00400000 /* MAL interrupt coalescence TX1 */
-#define UIC_MCTX2 0x00200000 /* MAL interrupt coalescence TX2 */
-#define UIC_MCTX3 0x00100000 /* MAL interrupt coalescence TX3 */
-#define UIC_MCTR0 0x00080000 /* MAL interrupt coalescence TR0 */
-#define UIC_MCTR1 0x00040000 /* MAL interrupt coalescence TR1 */
-#define UIC_MCTR2 0x00020000 /* MAL interrupt coalescence TR2 */
-#define UIC_MCTR3 0x00010000 /* MAL interrupt coalescence TR3 */
-#define UIC_ETH0 0x00008000 /* Ethernet 0 */
-#define UIC_ETH1 0x00004000 /* Ethernet 1 */
-#define UIC_ETH2 0x00002000 /* Ethernet 2 */
-#define UIC_ETH3 0x00001000 /* Ethernet 3 */
-#define UIC_EWU0 0x00000800 /* Ethernet 0 wakeup */
-#define UIC_EWU1 0x00000400 /* Ethernet 1 wakeup */
-#define UIC_EWU2 0x00000200 /* Ethernet 2 wakeup */
-#define UIC_EWU3 0x00000100 /* Ethernet 3 wakeup */
-#define UIC_EIR10 0x00000080 /* External interrupt 10 */
-#define UIC_EIR11 0x00000040 /* External interrupt 11 */
-#define UIC_RSVD2 0x00000020 /* Reserved */
-#define UIC_PLB4XAHB 0x00000010 /* PLB4XAHB / AHBARB error */
-#define UIC_OTG 0x00000008 /* USB2.0 OTG */
-#define UIC_EHCI 0x00000004 /* USB2.0 Host EHCI */
-#define UIC_OHCI 0x00000002 /* USB2.0 Host OHCI */
-#define UIC_OHCISMI 0x00000001 /* USB2.0 Host OHCI SMI */
-
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */
-
-#define UIC_EIR5 0x80000000 /* External interrupt 5 */
-#define UIC_EIR6 0x40000000 /* External interrupt 6 */
-#define UIC_OPB 0x20000000 /* OPB to PLB bridge interrupt stat */
-#define UIC_EIR2 0x10000000 /* External interrupt 2 */
-#define UIC_EIR3 0x08000000 /* External interrupt 3 */
-#define UIC_DDR2 0x04000000 /* DDR2 sdram */
-#define UIC_MCTX0 0x02000000 /* MAl intp coalescence TX0 */
-#define UIC_MCTX1 0x01000000 /* MAl intp coalescence TX1 */
-#define UIC_MCTR0 0x00800000 /* MAl intp coalescence TR0 */
-#define UIC_MCTR1 0x00400000 /* MAl intp coalescence TR1 */
-
-#endif /* CONFIG_440GX */
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller Base 0 interrupts (UICB0)
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX)
-#define UICB0_UIC0CI 0x80000000 /* UIC0 Critical Interrupt */
-#define UICB0_UIC0NCI 0x40000000 /* UIC0 Noncritical Interrupt */
-#define UICB0_UIC1CI 0x20000000 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x10000000 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x08000000 /* UIC2 Critical Interrupt */
-#define UICB0_UIC2NCI 0x04000000 /* UIC2 Noncritical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
- UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
-
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-
-#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
-#define UICB0_UIC2NCI 0x00200000 /* UIC2 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x00100000 /* UIC2 Critical Interrupt */
-#define UICB0_UIC3NCI 0x00008000 /* UIC3 Noncritical Interrupt */
-#define UICB0_UIC3CI 0x00004000 /* UIC3 Critical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \
- UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)
-
-#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x00000004 /* UIC2 Critical Interrupt */
-#define UICB0_UIC2NCI 0x00000008 /* UIC2 Noncritical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
- UICB0_UIC1CI | UICB0_UIC2NCI)
-
-#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
-
-#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI)
-
-#endif /* CONFIG_440GX */
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller interrupts
-+---------------------------------------------------------------------------*/
-#if defined(CONFIG_440SPE)
-/*#define UICB0_UIC0CI 0x80000000*/ /* UIC0 Critical Interrupt */
-/*#define UICB0_UIC0NCI 0x40000000*/ /* UIC0 Noncritical Interrupt */
-#define UICB0_UIC1CI 0x00000002 /* UIC1 Critical Interrupt */
-#define UICB0_UIC1NCI 0x00000001 /* UIC1 Noncritical Interrupt */
-#define UICB0_UIC2CI 0x00200000 /* UIC2 Critical Interrupt */
-#define UICB0_UIC2NCI 0x00100000 /* UIC2 Noncritical Interrupt */
-#define UICB0_UIC3CI 0x00008000 /* UIC3 Critical Interrupt */
-#define UICB0_UIC3NCI 0x00004000 /* UIC3 Noncritical Interrupt */
-
-#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \
- UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 0 interrupts (UIC0)
-+---------------------------------------------------------------------------*/
-#define UIC_U0 0x80000000 /* UART 0 */
-#define UIC_U1 0x40000000 /* UART 1 */
-#define UIC_IIC0 0x20000000 /* IIC */
-#define UIC_IIC1 0x10000000 /* IIC */
-#define UIC_PIM 0x08000000 /* PCI inbound message */
-#define UIC_PCRW 0x04000000 /* PCI command register write */
-#define UIC_PPM 0x02000000 /* PCI power management */
-#define UIC_PVPDA 0x01000000 /* PCIx 0 vpd access */
-#define UIC_MSI0 0x00800000 /* PCIx MSI level 0 */
-#define UIC_EIR15 0x00400000 /* External intp 15 */
-#define UIC_PEMSI0 0x00080000 /* PCIe MSI level 0 */
-#define UIC_PEMSI1 0x00040000 /* PCIe MSI level 1 */
-#define UIC_PEMSI2 0x00020000 /* PCIe MSI level 2 */
-#define UIC_PEMSI3 0x00010000 /* PCIe MSI level 3 */
-#define UIC_EIR14 0x00002000 /* External interrupt 14 */
-#define UIC_D0CPFF 0x00001000 /* DMA0 cp fifo full */
-#define UIC_D0CSNS 0x00000800 /* DMA0 cs fifo needs service */
-#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */
-#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */
-#define UIC_I2OID 0x00000100 /* I2O inbound door bell */
-#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */
-#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */
-#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */
-#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */
-#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */
-#define UIC_CPTCNT 0x00000004 /* GPT Count Timer */
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 1 interrupts (UIC1)
-+---------------------------------------------------------------------------*/
-#define UIC_EIR13 0x80000000 /* externei intp 13 */
-#define UIC_MS 0x40000000 /* MAL SERR */
-#define UIC_MTDE 0x20000000 /* MAL TXDE */
-#define UIC_MRDE 0x10000000 /* MAL RXDE */
-#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */
-#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
-#define UIC_MTE 0x02000000 /* MAL TXEOB */
-#define UIC_MRE 0x01000000 /* MAL RXEOB */
-#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
-#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
-#define UIC_MSI3 0x00200000 /* PCI MSI level 3 */
-#define UIC_L2C 0x00100000 /* L2 cache */
-#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
-#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
-#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
-#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
-#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
-#define UIC_EIR12 0x00004000 /* External interrupt 12 */
-#define UIC_EIR11 0x00002000 /* External interrupt 11 */
-#define UIC_EIR10 0x00001000 /* External interrupt 10 */
-#define UIC_EIR9 0x00000800 /* External interrupt 9 */
-#define UIC_EIR8 0x00000400 /* External interrupt 8 */
-#define UIC_DMAE 0x00000200 /* dma error */
-#define UIC_I2OE 0x00000100 /* i2o error */
-#define UIC_SRE 0x00000080 /* Serial ROM error */
-#define UIC_PCIXAE 0x00000040 /* Pcix0 async error */
-#define UIC_EIR7 0x00000020 /* External interrupt 7 */
-#define UIC_EIR6 0x00000010 /* External interrupt 6 */
-#define UIC_ETH0 0x00000008 /* Ethernet 0 */
-#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
-#define UIC_ETH1 0x00000002 /* reserved */
-#define UIC_XOR 0x00000001 /* xor */
-
-/*---------------------------------------------------------------------------+
-| Universal interrupt controller 2 interrupts (UIC2)
-+---------------------------------------------------------------------------*/
-#define UIC_PEOAL 0x80000000 /* PE0 AL */
-#define UIC_PEOVA 0x40000000 /* PE0 VPD access */
-#define UIC_PEOHRR 0x20000000 /* PE0 Host reset request rising */
-#define UIC_PE0HRF 0x10000000 /* PE0 Host reset request falling */
-#define UIC_PE0TCR 0x08000000 /* PE0 TCR */
-#define UIC_PE0BVCO 0x04000000 /* PE0 Busmaster VCO */
-#define UIC_PE0DCRE 0x02000000 /* PE0 DCR error */
-#define UIC_PE1AL 0x00800000 /* PE1 AL */
-#define UIC_PE1VA 0x00400000 /* PE1 VPD access */
-#define UIC_PE1HRR 0x00200000 /* PE1 Host reset request rising */
-#define UIC_PE1HRF 0x00100000 /* PE1 Host reset request falling */
-#define UIC_PE1TCR 0x00080000 /* PE1 TCR */
-#define UIC_PE1BVCO 0x00040000 /* PE1 Busmaster VCO */
-#define UIC_PE1DCRE 0x00020000 /* PE1 DCR error */
-#define UIC_PE2AL 0x00008000 /* PE2 AL */
-#define UIC_PE2VA 0x00004000 /* PE2 VPD access */
-#define UIC_PE2HRR 0x00002000 /* PE2 Host reset request rising */
-#define UIC_PE2HRF 0x00001000 /* PE2 Host reset request falling */
-#define UIC_PE2TCR 0x00000800 /* PE2 TCR */
-#define UIC_PE2BVCO 0x00000400 /* PE2 Busmaster VCO */
-#define UIC_PE2DCRE 0x00000200 /* PE2 DCR error */
-#define UIC_EIR5 0x00000080 /* External interrupt 5 */
-#define UIC_EIR4 0x00000040 /* External interrupt 4 */
-#define UIC_EIR3 0x00000020 /* External interrupt 3 */
-#define UIC_EIR2 0x00000010 /* External interrupt 2 */
-#define UIC_EIR1 0x00000008 /* External interrupt 1 */
-#define UIC_EIR0 0x00000004 /* External interrupt 0 */
-#endif /* CONFIG_440SPE */
-
-/*-----------------------------------------------------------------------------+
-| External Bus Controller Bit Settings
-+-----------------------------------------------------------------------------*/
-#define EBC_CFGADDR_MASK 0x0000003F
-
-#define EBC_BXCR_BAS_ENCODE(n) ((((unsigned long)(n))&0xFFF00000)<<0)
-#define EBC_BXCR_BS_MASK 0x000E0000
-#define EBC_BXCR_BS_1MB 0x00000000
-#define EBC_BXCR_BS_2MB 0x00020000
-#define EBC_BXCR_BS_4MB 0x00040000
-#define EBC_BXCR_BS_8MB 0x00060000
-#define EBC_BXCR_BS_16MB 0x00080000
-#define EBC_BXCR_BS_32MB 0x000A0000
-#define EBC_BXCR_BS_64MB 0x000C0000
-#define EBC_BXCR_BS_128MB 0x000E0000
-#define EBC_BXCR_BU_MASK 0x00018000
-#define EBC_BXCR_BU_R 0x00008000
-#define EBC_BXCR_BU_W 0x00010000
-#define EBC_BXCR_BU_RW 0x00018000
-#define EBC_BXCR_BW_MASK 0x00006000
-#define EBC_BXCR_BW_8BIT 0x00000000
-#define EBC_BXCR_BW_16BIT 0x00002000
-#define EBC_BXCR_BW_32BIT 0x00006000
-#define EBC_BXAP_BME_ENABLED 0x80000000
-#define EBC_BXAP_BME_DISABLED 0x00000000
-#define EBC_BXAP_TWT_ENCODE(n) ((((unsigned long)(n))&0xFF)<<23)
-#define EBC_BXAP_BCE_DISABLE 0x00000000
-#define EBC_BXAP_BCE_ENABLE 0x00400000
-#define EBC_BXAP_BCT_MASK 0x00300000
-#define EBC_BXAP_BCT_2TRANS 0x00000000
-#define EBC_BXAP_BCT_4TRANS 0x00100000
-#define EBC_BXAP_BCT_8TRANS 0x00200000
-#define EBC_BXAP_BCT_16TRANS 0x00300000
-#define EBC_BXAP_CSN_ENCODE(n) ((((unsigned long)(n))&0x3)<<18)
-#define EBC_BXAP_OEN_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
-#define EBC_BXAP_WBN_ENCODE(n) ((((unsigned long)(n))&0x3)<<14)
-#define EBC_BXAP_WBF_ENCODE(n) ((((unsigned long)(n))&0x3)<<12)
-#define EBC_BXAP_TH_ENCODE(n) ((((unsigned long)(n))&0x7)<<9)
-#define EBC_BXAP_RE_ENABLED 0x00000100
-#define EBC_BXAP_RE_DISABLED 0x00000000
-#define EBC_BXAP_SOR_DELAYED 0x00000000
-#define EBC_BXAP_SOR_NONDELAYED 0x00000080
-#define EBC_BXAP_BEM_WRITEONLY 0x00000000
-#define EBC_BXAP_BEM_RW 0x00000040
-#define EBC_BXAP_PEN_DISABLED 0x00000000
-
-#define EBC_CFG_LE_MASK 0x80000000
-#define EBC_CFG_LE_UNLOCK 0x00000000
-#define EBC_CFG_LE_LOCK 0x80000000
-#define EBC_CFG_PTD_MASK 0x40000000
-#define EBC_CFG_PTD_ENABLE 0x00000000
-#define EBC_CFG_PTD_DISABLE 0x40000000
-#define EBC_CFG_RTC_MASK 0x38000000
-#define EBC_CFG_RTC_16PERCLK 0x00000000
-#define EBC_CFG_RTC_32PERCLK 0x08000000
-#define EBC_CFG_RTC_64PERCLK 0x10000000
-#define EBC_CFG_RTC_128PERCLK 0x18000000
-#define EBC_CFG_RTC_256PERCLK 0x20000000
-#define EBC_CFG_RTC_512PERCLK 0x28000000
-#define EBC_CFG_RTC_1024PERCLK 0x30000000
-#define EBC_CFG_RTC_2048PERCLK 0x38000000
-#define EBC_CFG_ATC_MASK 0x04000000
-#define EBC_CFG_ATC_HI 0x00000000
-#define EBC_CFG_ATC_PREVIOUS 0x04000000
-#define EBC_CFG_DTC_MASK 0x02000000
-#define EBC_CFG_DTC_HI 0x00000000
-#define EBC_CFG_DTC_PREVIOUS 0x02000000
-#define EBC_CFG_CTC_MASK 0x01000000
-#define EBC_CFG_CTC_HI 0x00000000
-#define EBC_CFG_CTC_PREVIOUS 0x01000000
-#define EBC_CFG_OEO_MASK 0x00800000
-#define EBC_CFG_OEO_HI 0x00000000
-#define EBC_CFG_OEO_PREVIOUS 0x00800000
-#define EBC_CFG_EMC_MASK 0x00400000
-#define EBC_CFG_EMC_NONDEFAULT 0x00000000
-#define EBC_CFG_EMC_DEFAULT 0x00400000
-#define EBC_CFG_PME_MASK 0x00200000
-#define EBC_CFG_PME_DISABLE 0x00000000
-#define EBC_CFG_PME_ENABLE 0x00200000
-#define EBC_CFG_PMT_MASK 0x001F0000
-#define EBC_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
-#define EBC_CFG_PR_MASK 0x0000C000
-#define EBC_CFG_PR_16 0x00000000
-#define EBC_CFG_PR_32 0x00004000
-#define EBC_CFG_PR_64 0x00008000
-#define EBC_CFG_PR_128 0x0000C000
-
/*-----------------------------------------------------------------------------+
| SDR0 Bit Settings
+-----------------------------------------------------------------------------*/
#if defined(CONFIG_440SP)
-#define SDR0_SRST 0x0200
-
#define SDR0_DDR0 0x00E1
#define SDR0_DDR0_DPLLRST 0x80000000
#define SDR0_DDR0_DDRM_MASK 0x60000000
#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF)
#endif
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_460SX)
#define SDR0_CP440 0x0180
#define SDR0_CP440_ERPN_MASK 0x30000000
#define SDR0_CP440_ERPN_MASK_HI 0x3000
#define SDR0_UART0 0x0120
#define SDR0_UART1 0x0121
#define SDR0_UART2 0x0122
-#define SDR0_UARTX_UXICS_MASK 0xF0000000
-#define SDR0_UARTX_UXICS_PLB 0x20000000
-#define SDR0_UARTX_UXEC_MASK 0x00800000
-#define SDR0_UARTX_UXEC_INT 0x00000000
-#define SDR0_UARTX_UXEC_EXT 0x00800000
-#define SDR0_UARTX_UXDIV_MASK 0x000000FF
-#define SDR0_UARTX_UXDIV_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
-#define SDR0_UARTX_UXDIV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0xFF)+1)
-
-#define SDR0_CP440 0x0180
-#define SDR0_CP440_ERPN_MASK 0x30000000
-#define SDR0_CP440_ERPN_MASK_HI 0x3000
-#define SDR0_CP440_ERPN_MASK_LO 0x0000
-#define SDR0_CP440_ERPN_EBC 0x10000000
-#define SDR0_CP440_ERPN_EBC_HI 0x1000
-#define SDR0_CP440_ERPN_EBC_LO 0x0000
-#define SDR0_CP440_ERPN_PCI 0x20000000
-#define SDR0_CP440_ERPN_PCI_HI 0x2000
-#define SDR0_CP440_ERPN_PCI_LO 0x0000
-#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28)
-#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03)
-#define SDR0_CP440_NTO1_MASK 0x00000002
-#define SDR0_CP440_NTO1_NTOP 0x00000000
-#define SDR0_CP440_NTO1_NTO1 0x00000002
-#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
-#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
-
-#define SDR0_XCR0 0x01C0
-#define SDR0_XCR1 0x01C3
-#define SDR0_XCR2 0x01C6
-#define SDR0_XCRn_PAE_MASK 0x80000000
-#define SDR0_XCRn_PAE_DISABLE 0x00000000
-#define SDR0_XCRn_PAE_ENABLE 0x80000000
-#define SDR0_XCRn_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
-#define SDR0_XCRn_PAE_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
-#define SDR0_XCRn_PHCE_MASK 0x40000000
-#define SDR0_XCRn_PHCE_DISABLE 0x00000000
-#define SDR0_XCRn_PHCE_ENABLE 0x40000000
-#define SDR0_XCRn_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
-#define SDR0_XCRn_PHCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
-#define SDR0_XCRn_PISE_MASK 0x20000000
-#define SDR0_XCRn_PISE_DISABLE 0x00000000
-#define SDR0_XCRn_PISE_ENABLE 0x20000000
-#define SDR0_XCRn_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
-#define SDR0_XCRn_PISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
-#define SDR0_XCRn_PCWE_MASK 0x10000000
-#define SDR0_XCRn_PCWE_DISABLE 0x00000000
-#define SDR0_XCRn_PCWE_ENABLE 0x10000000
-#define SDR0_XCRn_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28)
-#define SDR0_XCRn_PCWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01)
-#define SDR0_XCRn_PPIM_MASK 0x0F000000
-#define SDR0_XCRn_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24)
-#define SDR0_XCRn_PPIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
-#define SDR0_XCRn_PR64E_MASK 0x00800000
-#define SDR0_XCRn_PR64E_DISABLE 0x00000000
-#define SDR0_XCRn_PR64E_ENABLE 0x00800000
-#define SDR0_XCRn_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23)
-#define SDR0_XCRn_PR64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01)
-#define SDR0_XCRn_PXFS_MASK 0x00600000
-#define SDR0_XCRn_PXFS_100_133 0x00000000
-#define SDR0_XCRn_PXFS_66_100 0x00200000
-#define SDR0_XCRn_PXFS_50_66 0x00400000
-#define SDR0_XCRn_PXFS_0_33 0x00600000
-#define SDR0_XCRn_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21)
-#define SDR0_XCRn_PXFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03)
-
-#define SDR0_XPLLC0 0x01C1
-#define SDR0_XPLLD0 0x01C2
-#define SDR0_XPLLC1 0x01C4
-#define SDR0_XPLLD1 0x01C5
-#define SDR0_XPLLC2 0x01C7
-#define SDR0_XPLLD2 0x01C8
-#define SDR0_SRST 0x0200
#define SDR0_SLPIPE 0x0220
#define SDR0_AMP0 0x0240
#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
+#define SDR0_ECID0 0x0080
+#define SDR0_ECID1 0x0081
+#define SDR0_ECID2 0x0082
+#define SDR0_ECID3 0x0083
+
/* Ethernet PLL Configuration Register (SDR0_ETH_PLL) */
#define SDR0_ETH_PLL 0x4102
#define SDR0_ETH_PLL_PLLLOCK 0x80000000 /*Ethernet PLL lock indication*/
#define SDR0_ETH_CFG_ZMII_RMII_MODE_10M 0x10
#define SDR0_ETH_CFG_ZMII_RMII_MODE_100M 0x11
+/* Ethernet Status Register */
+#define SDR0_ETH_STS 0x4104
+
/* Miscealleneaous Function Reg. (SDR0_MFR) */
#define SDR0_MFR 0x4300
#define SDR0_MFR_T0TxFL 0x00800000 /* force parity error TAHOE0 Tx FIFO bits 0:63 */
#define AHB_TOP 0xA4
#define AHB_BOT 0xA5
+#define SDR0_AHB_CFG 0x370
+#define SDR0_USB2HOST_CFG 0x371
#endif /* CONFIG_460EX || CONFIG_460GT */
#define SDR0_SDCS_SDD (0x80000000 >> 31)
#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define SDR0_SRST0 0x0200
-#define SDR0_SRST SDR0_SRST0 /* for compatability reasons */
+#define SDR0_SRST0 SDR0_SRST /* for compatability reasons */
#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
#define SDR0_SRST1_AHBICM 0x00000002 /* AHB inter-connect matrix */
#define SDR0_SRST1_SATA 0x00000001 /* Serial ATA controller */
-#define SDR0_PCI0 0x1c0 /* PCI Configuration Register */
-
#else
#define SDR0_SRST_BGO 0x80000000
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
+ defined(CONFIG_460SX)
#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
#endif /* CONFIG_440GX */
#if defined (CONFIG_440EPX) || defined (CONFIG_440GRX)
-/*--------------------------------------*/
-#define CPR0_PLLC 0x40
-#define CPR0_PLLC_RST_MASK 0x80000000
-#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
-#define CPR0_PLLC_RST_PLLRESET 0x80000000
-#define CPR0_PLLC_ENG_MASK 0x40000000
-#define CPR0_PLLC_ENG_DISABLE 0x00000000
-#define CPR0_PLLC_ENG_ENABLE 0x40000000
-#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
-#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
-#define CPR0_PLLC_SRC_MASK 0x20000000
-#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
-#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
-#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
-#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
-#define CPR0_PLLC_SEL_MASK 0x07000000
-#define CPR0_PLLC_SEL_PLL 0x00000000
-#define CPR0_PLLC_SEL_CPU 0x01000000
-#define CPR0_PLLC_SEL_PER 0x05000000
-#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
-#define CPR0_PLLC_TUNE_MASK 0x000003FF
-#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
-#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
-/*--------------------------------------*/
-#define CPR0_PLLD 0x60
-#define CPR0_PLLD_FBDV_MASK 0x1F000000
-#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
-#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
-#define CPR0_PLLD_FWDVA_MASK 0x000F0000
-#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
-#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
-#define CPR0_PLLD_FWDVB_MASK 0x00000700
-#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
-#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
-#define CPR0_PLLD_LFBDV_MASK 0x0000003F
-#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
-#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
-/*--------------------------------------*/
-#define CPR0_PRIMAD 0x80
-#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
-#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-/*--------------------------------------*/
-#define CPR0_PRIMBD 0xA0
-#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
-#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-/*--------------------------------------*/
-#if 0
-#define CPR0_CPM0_ER 0xB0 /* CPM Enable Register */
-#define CPR0_CPM0_FR 0xB1 /* CPM Force Register */
-#define CPR0_CPM0_SR 0xB2 /* CPM Status Register */
-#define CPR0_CPM0_IIC0 0x80000000 /* Inter-Intergrated Circuit0 */
-#define CPR0_CPM0_IIC1 0x40000000 /* Inter-Intergrated Circuit1 */
-#define CPR0_CPM0_PCI 0x20000000 /* Peripheral Component Interconnect */
-#define CPR0_CPM0_USB1H 0x08000000 /* USB1.1 Host */
-#define CPR0_CPM0_FPU 0x04000000 /* PPC440 FPU */
-#define CPR0_CPM0_CPU 0x02000000 /* PPC440x5 Processor Core */
-#define CPR0_CPM0_DMA 0x01000000 /* Direct Memory Access Controller */
-#define CPR0_CPM0_BGO 0x00800000 /* PLB to OPB Bridge */
-#define CPR0_CPM0_BGI 0x00400000 /* OPB to PLB Bridge */
-#define CPR0_CPM0_EBC 0x00200000 /* External Bus Controller */
-#define CPR0_CPM0_NDFC 0x00100000 /* Nand Flash Controller */
-#define CPR0_CPM0_MADMAL 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
-#define CPR0_CPM0_DMC 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
-#define CPR0_CPM0_PLB4 0x00040000 /* PLB4 Arbiter */
-#define CPR0_CPM0_PLB4x3x 0x00020000 /* PLB4 to PLB3 */
-#define CPR0_CPM0_PLB3x4x 0x00010000 /* PLB3 to PLB4 */
-#define CPR0_CPM0_PLB3 0x00008000 /* PLB3 Arbiter */
-#define CPR0_CPM0_PPM 0x00002000 /* PLB Performance Monitor */
-#define CPR0_CPM0_UIC1 0x00001000 /* Universal Interrupt Controller 1 */
-#define CPR0_CPM0_GPIO 0x00000800 /* General Purpose IO */
-#define CPR0_CPM0_GPT 0x00000400 /* General Purpose Timer */
-#define CPR0_CPM0_UART0 0x00000200 /* Universal Asynchronous Rcver/Xmitter 0 */
-#define CPR0_CPM0_UART1 0x00000100 /* Universal Asynchronous Rcver/Xmitter 1 */
-#define CPR0_CPM0_UIC0 0x00000080 /* Universal Interrupt Controller 0 */
-#define CPR0_CPM0_TMRCLK 0x00000040 /* CPU Timer */
-#define CPR0_CPM0_EMC0 0x00000020 /* Ethernet 0 */
-#define CPR0_CPM0_EMC1 0x00000010 /* Ethernet 1 */
-#define CPR0_CPM0_UART2 0x00000008 /* Universal Asynchronous Rcver/Xmitter 2 */
-#define CPR0_CPM0_UART3 0x00000004 /* Universal Asynchronous Rcver/Xmitter 3 */
-#define CPR0_CPM0_USB2D 0x00000002 /* USB2.0 Device */
-#define CPR0_CPM0_USB2H 0x00000001 /* USB2.0 Host */
+#define CPR0_ICFG_RLI_MASK 0x80000000
+#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
+#define CPR0_PERD_PERDV0_MASK 0x07000000
#endif
-/*--------------------------------------*/
-#define CPR0_OPBD 0xC0
-#define CPR0_OPBD_OPBDV0_MASK 0x03000000
-#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-/*--------------------------------------*/
-#define CPR0_PERD 0xE0
-#define CPR0_PERD_PERDV0_MASK 0x07000000
-#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
-#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
-/*--------------------------------------*/
-#define CPR0_MALD 0x100
-#define CPR0_MALD_MALDV0_MASK 0x03000000
-#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-/*--------------------------------------*/
-#define CPR0_SPCID 0x120
-#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
-#define CPR0_SPCID_SPCIDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define CPR0_SPCID_SPCIDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
-/*--------------------------------------*/
-#define CPR0_ICFG 0x140
-#define CPR0_ICFG_RLI_MASK 0x80000000
-#define CPR0_ICFG_RLI_RESETCPR 0x00000000
-#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
-#define CPR0_ICFG_ICS_MASK 0x00000007
-#endif /* defined (CONFIG_440EPX) || defined (CONFIG_440GRX) */
/*-----------------------------------------------------------------------------
| IIC Register Offsets
#define IICXTCNTLSS 0x0F
#define IICDIRECTCNTL 0x10
-/*-----------------------------------------------------------------------------
-| UART Register Offsets
-'----------------------------------------------------------------------------*/
-#define DATA_REG 0x00
-#define DL_LSB 0x00
-#define DL_MSB 0x01
-#define INT_ENABLE 0x01
-#define FIFO_CONTROL 0x02
-#define LINE_CONTROL 0x03
-#define MODEM_CONTROL 0x04
-#define LINE_STATUS 0x05
-#define MODEM_STATUS 0x06
-#define SCRATCH 0x07
-
/*-----------------------------------------------------------------------------
| PCI Internal Registers et. al. (accessed via plb)
+----------------------------------------------------------------------------*/
-#define PCIX0_CFGADR (CFG_PCI_BASE + 0x0ec00000)
-#define PCIX0_CFGDATA (CFG_PCI_BASE + 0x0ec00004)
-#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000)
-#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000)
+#define PCIX0_CFGADR (CONFIG_SYS_PCI_BASE + 0x0ec00000)
+#define PCIX0_CFGDATA (CONFIG_SYS_PCI_BASE + 0x0ec00004)
+#define PCIX0_CFGBASE (CONFIG_SYS_PCI_BASE + 0x0ec80000)
+#define PCIX0_IOBASE (CONFIG_SYS_PCI_BASE + 0x08000000)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* PCI Local Configuration Registers
--------------------------------- */
-#define PCI_MMIO_LCR_BASE (CFG_PCI_BASE + 0x0f400000) /* Real => 0x0EF400000 */
+#define PCI_MMIO_LCR_BASE (CONFIG_SYS_PCI_BASE + 0x0f400000) /* Real => 0x0EF400000 */
/* PCI Master Local Configuration Registers */
#define PCIX0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* USB2.0 Device */
-#define USB2D0_BASE CFG_USB2D0_BASE
+#define USB2D0_BASE CONFIG_SYS_USB2D0_BASE
#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000)
* GPIO macro register defines
******************************************************************************/
#if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700)
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_460SX)
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE+0x00000700)
#define GPIO0_OR (GPIO0_BASE+0x0)
#define GPIO0_TCR (GPIO0_BASE+0x4)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00)
-#define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00)
+#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE+0x00000B00)
+#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE+0x00000C00)
#define GPIO0_OR (GPIO0_BASE+0x0)
#define GPIO0_TCR (GPIO0_BASE+0x4)
#ifndef __ASSEMBLY__
-static inline u32 get_mcsr(void)
-{
- u32 val;
-
- asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
- return val;
-}
-
-static inline void set_mcsr(u32 val)
-{
- asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
-}
-
#endif /* _ASMLANGUAGE */
#endif /* __PPC440_H__ */
projects / karo-tx-uboot.git / blobdiff