* (C) Copyright 2001
* Denis Peter, MPL AG Switzerland
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier: GPL-2.0+
* Note: Part of this code has been derived from linux
*
*/
#define _USB_H_
#include <usb_defs.h>
-#include <usbdescriptors.h>
+#include <linux/usb/ch9.h>
+
+/*
+ * The EHCI spec says that we must align to at least 32 bytes. However,
+ * some platforms require larger alignment.
+ */
+#if ARCH_DMA_MINALIGN > 32
+#define USB_DMA_MINALIGN ARCH_DMA_MINALIGN
+#else
+#define USB_DMA_MINALIGN 32
+#endif
/* Everything is aribtrary */
#define USB_ALTSETTINGALLOC 4
#define USB_CNTL_TIMEOUT 100 /* 100ms timeout */
+/*
+ * This is the timeout to allow for submitting an urb in ms. We allow more
+ * time for a BULK device to react - some are slow.
+ */
+#define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 1000)
+
/* device request (setup) */
struct devrequest {
unsigned char requesttype;
unsigned short length;
} __attribute__ ((packed));
-/* All standard descriptors have these 2 fields in common */
-struct usb_descriptor_header {
- unsigned char bLength;
- unsigned char bDescriptorType;
-} __attribute__ ((packed));
-
/* Interface */
struct usb_interface {
struct usb_interface_descriptor desc;
unsigned char act_altsetting;
struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
+ /*
+ * Super Speed Device will have Super Speed Endpoint
+ * Companion Descriptor (section 9.6.7 of usb 3.0 spec)
+ * Revision 1.0 June 6th 2011
+ */
+ struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS];
} __attribute__ ((packed));
/* Configuration information.. */
struct usb_config {
- struct usb_configuration_descriptor desc;
+ struct usb_config_descriptor desc;
unsigned char no_of_if; /* number of interfaces */
struct usb_interface if_desc[USB_MAXINTERFACES];
int epmaxpacketout[16]; /* OUTput endpoint specific maximums */
int configno; /* selected config number */
- struct usb_device_descriptor descriptor; /* Device Descriptor */
+ /* Device Descriptor */
+ struct usb_device_descriptor descriptor
+ __attribute__((aligned(ARCH_DMA_MINALIGN)));
struct usb_config config; /* config descriptor */
int have_langid; /* whether string_langid is valid yet */
int portnr;
struct usb_device *parent;
struct usb_device *children[USB_MAXCHILDREN];
+
+ void *controller; /* hardware controller private data */
+ /* slot_id - for xHCI enabled devices */
+ unsigned int slot_id;
+};
+
+/*
+ * You can initialize platform's USB host or device
+ * ports by passing this enum as an argument to
+ * board_usb_init().
+ */
+enum usb_init_type {
+ USB_INIT_HOST,
+ USB_INIT_DEVICE
};
/**********************************************************************
defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
- defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX)
+ defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
+ defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \
+ defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \
+ defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_XHCI)
+
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller);
+int usb_lowlevel_stop(int index);
-int usb_lowlevel_init(void);
-int usb_lowlevel_stop(void);
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int transfer_len);
int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, struct devrequest *setup);
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, int interval);
-void usb_event_poll(void);
/* Defines */
#define USB_UHCI_VEND_ID 0x8086
#define USB_UHCI_DEV_ID 0x7112
-#else
-#error USB Lowlevel not defined
+/*
+ * PXA25x can only act as USB device. There are drivers
+ * which works with USB CDC gadgets implementations.
+ * Some of them have common routines which can be used
+ * in boards init functions e.g. udc_disconnect() used for
+ * forced device disconnection from host.
+ */
+#elif defined(CONFIG_USB_GADGET_PXA2XX)
+
+extern void udc_disconnect(void);
+
+#endif
+
+/*
+ * board-specific hardware initialization, called by
+ * usb drivers and u-boot commands
+ *
+ * @param index USB controller number
+ * @param init initializes controller as USB host or device
+ */
+int board_usb_init(int index, enum usb_init_type init);
+
+/*
+ * can be used to clean up after failed USB initialization attempt
+ * vide: board_usb_init()
+ *
+ * @param index USB controller number for selective cleanup
+ * @param init usb_init_type passed to board_usb_init()
+ */
+int board_usb_cleanup(int index, enum usb_init_type init);
+
+/*
+ * If CONFIG_USB_CABLE_CHECK is set then this function
+ * should be defined in board file.
+ *
+ * @return 1 if cable is connected and 0 otherwise.
+ */
+#ifdef CONFIG_USB_CABLE_CHECK
+int usb_cable_connected(void);
#endif
#ifdef CONFIG_USB_STORAGE
#endif
+#ifdef CONFIG_USB_HOST_ETHER
+
+#define USB_MAX_ETH_DEV 5
+int usb_host_eth_scan(int mode);
+
+#endif
+
#ifdef CONFIG_USB_KEYBOARD
int drv_usb_kbd_init(void);
void *data, int len, int *actual_length, int timeout);
int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int transfer_len, int interval);
-void usb_disable_asynch(int disable);
+int usb_disable_asynch(int disable);
int usb_maxpacket(struct usb_device *dev, unsigned long pipe);
-inline void wait_ms(unsigned long ms);
int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer,
int cfgno);
int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type,
* - device: bits 8-14
* - endpoint: bits 15-18
* - Data0/1: bit 19
- * - speed: bit 26 (0 = Full, 1 = Low Speed, 2 = High)
* - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt,
* 10 = control, 11 = bulk)
*
*/
/* Create various pipes... */
#define create_pipe(dev,endpoint) \
- (((dev)->devnum << 8) | (endpoint << 15) | \
- ((dev)->speed << 26) | (dev)->maxpacketsize)
+ (((dev)->devnum << 8) | ((endpoint) << 15) | \
+ (dev)->maxpacketsize)
#define default_pipe(dev) ((dev)->speed << 26)
#define usb_sndctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \
#define usb_pipe_endpdev(pipe) (((pipe) >> 8) & 0x7ff)
#define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf)
#define usb_pipedata(pipe) (((pipe) >> 19) & 1)
-#define usb_pipespeed(pipe) (((pipe) >> 26) & 3)
-#define usb_pipeslow(pipe) (usb_pipespeed(pipe) == USB_SPEED_LOW)
#define usb_pipetype(pipe) (((pipe) >> 30) & 3)
#define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
#define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT)
#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
+#define usb_pipe_ep_index(pipe) \
+ usb_pipecontrol(pipe) ? (usb_pipeendpoint(pipe) * 2) : \
+ ((usb_pipeendpoint(pipe) * 2) - \
+ (usb_pipein(pipe) ? 0 : 1))
/*************************************************************************
* Hub Stuff
struct usb_hub_descriptor desc;
};
+int usb_hub_probe(struct usb_device *dev, int ifnum);
+void usb_hub_reset(void);
+int hub_port_reset(struct usb_device *dev, int port,
+ unsigned short *portstat);
+
+struct usb_device *usb_alloc_new_device(void *controller);
+
+int usb_new_device(struct usb_device *dev);
+void usb_free_device(void);
+int usb_alloc_device(struct usb_device *dev);
+
#endif /*_USB_H_ */