Move lib_$ARCH directories to arch/$ARCH/lib

[karo-tx-uboot.git] / lib_microblaze / board.c

diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
deleted file mode 100644 (file)
index d4baea9..0000000
--- a/lib_microblaze/board.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * (C) Copyright 2007 Michal Simek
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Michal  SIMEK <monstr@monstr.eu>
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <timestamp.h>
-#include <version.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const char version_string[] = U_BOOT_VERSION " ("U_BOOT_DATE" - "U_BOOT_TIME")";
-
-#ifdef CONFIG_SYS_GPIO_0
-extern int gpio_init (void);
-#endif
-#ifdef CONFIG_SYS_INTC_0
-extern int interrupts_init (void);
-#endif
-#if defined(CONFIG_CMD_NET)
-extern int eth_init (bd_t * bis);
-#endif
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-typedef int (init_fnc_t) (void);
-
-init_fnc_t *init_sequence[] = {
-       env_init,
-       serial_init,
-#ifdef CONFIG_SYS_GPIO_0
-       gpio_init,
-#endif
-#ifdef CONFIG_SYS_INTC_0
-       interrupts_init,
-#endif
-       NULL,
-};
-
-void board_init (void)
-{
-       bd_t *bd;
-       init_fnc_t **init_fnc_ptr;
-       gd = (gd_t *) CONFIG_SYS_GBL_DATA_OFFSET;
-#if defined(CONFIG_CMD_FLASH)
-       ulong flash_size = 0;
-#endif
-       asm ("nop");    /* FIXME gd is not initialize - wait */
-       memset ((void *)gd, 0, CONFIG_SYS_GBL_DATA_SIZE);
-       gd->bd = (bd_t *) (gd + 1);     /* At end of global data */
-       gd->baudrate = CONFIG_BAUDRATE;
-       bd = gd->bd;
-       bd->bi_baudrate = CONFIG_BAUDRATE;
-       bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
-       bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
-       gd->flags |= GD_FLG_RELOC;      /* tell others: relocation done */
-
-       /*
-        * The Malloc area is immediately below the monitor copy in DRAM
-        * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
-        * as our monitory code is run from SDRAM
-        */
-       mem_malloc_init (CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
-
-       for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-               WATCHDOG_RESET ();
-               if ((*init_fnc_ptr) () != 0) {
-                       hang ();
-               }
-       }
-
-       puts ("SDRAM :\n");
-       printf ("\t\tIcache:%s\n", icache_status() ? "OK" : "FAIL");
-       printf ("\t\tDcache:%s\n", dcache_status() ? "OK" : "FAIL");
-       printf ("\tU-Boot Start:0x%08x\n", TEXT_BASE);
-
-#if defined(CONFIG_CMD_FLASH)
-       puts ("FLASH: ");
-       bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
-       if (0 < (flash_size = flash_init ())) {
-               bd->bi_flashsize = flash_size;
-               bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + flash_size;
-# ifdef CONFIG_SYS_FLASH_CHECKSUM
-               print_size (flash_size, "");
-               /*
-                * Compute and print flash CRC if flashchecksum is set to 'y'
-                *
-                * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
-                */
-               s = getenv ("flashchecksum");
-               if (s && (*s == 'y')) {
-                       printf ("  CRC: %08X",
-                               crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
-                       );
-               }
-               putc ('\n');
-# else /* !CONFIG_SYS_FLASH_CHECKSUM */
-               print_size (flash_size, "\n");
-# endif /* CONFIG_SYS_FLASH_CHECKSUM */
-       } else {
-               puts ("Flash init FAILED");
-               bd->bi_flashstart = 0;
-               bd->bi_flashsize = 0;
-               bd->bi_flashoffset = 0;
-       }
-#endif
-
-#if defined(CONFIG_CMD_NET)
-       /* IP Address */
-       bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-       eth_init (bd);
-#endif
-
-       /* relocate environment function pointers etc. */
-       env_relocate ();
-
-       /* main_loop */
-       for (;;) {
-               WATCHDOG_RESET ();
-               main_loop ();
-       }
-}
-
-void hang (void)
-{
-       puts ("### ERROR ### Please RESET the board ###\n");
-       for (;;) ;
-}