/* Read Local Version */
hci_req_add(req, HCI_OP_READ_LOCAL_VERSION, 0, NULL);
+ /* Read Local Supported Commands */
+ hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
+
+ /* Read Local Supported Features */
+ hci_req_add(req, HCI_OP_READ_LOCAL_FEATURES, 0, NULL);
+
/* Read Local AMP Info */
hci_req_add(req, HCI_OP_READ_LOCAL_AMP_INFO, 0, NULL);
/* Read Data Blk size */
hci_req_add(req, HCI_OP_READ_DATA_BLOCK_SIZE, 0, NULL);
+
+ /* Read Flow Control Mode */
+ hci_req_add(req, HCI_OP_READ_FLOW_CONTROL_MODE, 0, NULL);
+
+ /* Read Location Data */
+ hci_req_add(req, HCI_OP_READ_LOCATION_DATA, 0, NULL);
}
static void hci_init1_req(struct hci_request *req, unsigned long opt)
static void bredr_setup(struct hci_request *req)
{
+ struct hci_dev *hdev = req->hdev;
+
__le16 param;
__u8 flt_type;
/* Read Voice Setting */
hci_req_add(req, HCI_OP_READ_VOICE_SETTING, 0, NULL);
+ /* Read Number of Supported IAC */
+ hci_req_add(req, HCI_OP_READ_NUM_SUPPORTED_IAC, 0, NULL);
+
+ /* Read Current IAC LAP */
+ hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL);
+
/* Clear Event Filters */
flt_type = HCI_FLT_CLEAR_ALL;
hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type);
param = __constant_cpu_to_le16(0x7d00);
hci_req_add(req, HCI_OP_WRITE_CA_TIMEOUT, 2, ¶m);
- /* Read page scan parameters */
- if (req->hdev->hci_ver > BLUETOOTH_VER_1_1) {
+ /* AVM Berlin (31), aka "BlueFRITZ!", reports version 1.2,
+ * but it does not support page scan related HCI commands.
+ */
+ if (hdev->manufacturer != 31 && hdev->hci_ver > BLUETOOTH_VER_1_1) {
hci_req_add(req, HCI_OP_READ_PAGE_SCAN_ACTIVITY, 0, NULL);
hci_req_add(req, HCI_OP_READ_PAGE_SCAN_TYPE, 0, NULL);
}
goto done;
}
+ if (hdev->dev_type != HCI_BREDR) {
+ err = -EOPNOTSUPP;
+ goto done;
+ }
+
if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
err = -EOPNOTSUPP;
goto done;
u8 ad_len = 0, flags = 0;
size_t name_len;
- if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags))
+ if (test_bit(HCI_ADVERTISING, &hdev->dev_flags))
flags |= LE_AD_GENERAL;
if (test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
goto done;
}
- /* Check for rfkill but allow the HCI setup stage to proceed
- * (which in itself doesn't cause any RF activity).
- */
- if (test_bit(HCI_RFKILLED, &hdev->dev_flags) &&
- !test_bit(HCI_SETUP, &hdev->dev_flags)) {
- ret = -ERFKILL;
- goto done;
+ if (!test_bit(HCI_SETUP, &hdev->dev_flags)) {
+ /* Check for rfkill but allow the HCI setup stage to
+ * proceed (which in itself doesn't cause any RF activity).
+ */
+ if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) {
+ ret = -ERFKILL;
+ goto done;
+ }
+
+ /* Check for valid public address or a configured static
+ * random adddress, but let the HCI setup proceed to
+ * be able to determine if there is a public address
+ * or not.
+ *
+ * This check is only valid for BR/EDR controllers
+ * since AMP controllers do not have an address.
+ */
+ if (hdev->dev_type == HCI_BREDR &&
+ !bacmp(&hdev->bdaddr, BDADDR_ANY) &&
+ !bacmp(&hdev->static_addr, BDADDR_ANY)) {
+ ret = -EADDRNOTAVAIL;
+ goto done;
+ }
}
if (test_bit(HCI_UP, &hdev->flags)) {
hci_notify(hdev, HCI_DEV_UP);
if (!test_bit(HCI_SETUP, &hdev->dev_flags) &&
!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) &&
- mgmt_valid_hdev(hdev)) {
+ hdev->dev_type == HCI_BREDR) {
hci_dev_lock(hdev);
mgmt_powered(hdev, 1);
hci_dev_unlock(hdev);
if (test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags))
cancel_delayed_work(&hdev->power_off);
+ /* After this call it is guaranteed that the setup procedure
+ * has finished. This means that error conditions like RFKILL
+ * or no valid public or static random address apply.
+ */
flush_workqueue(hdev->req_workqueue);
err = hci_dev_do_open(hdev);
skb_queue_purge(&hdev->cmd_q);
atomic_set(&hdev->cmd_cnt, 1);
if (!test_bit(HCI_RAW, &hdev->flags) &&
+ !test_bit(HCI_AUTO_OFF, &hdev->dev_flags) &&
test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) {
set_bit(HCI_INIT, &hdev->flags);
__hci_req_sync(hdev, hci_reset_req, 0, HCI_CMD_TIMEOUT);
hdev->flags = 0;
hdev->dev_flags &= ~HCI_PERSISTENT_MASK;
- if (!test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags) &&
- mgmt_valid_hdev(hdev)) {
- hci_dev_lock(hdev);
- mgmt_powered(hdev, 0);
- hci_dev_unlock(hdev);
+ if (!test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags)) {
+ if (hdev->dev_type == HCI_BREDR) {
+ hci_dev_lock(hdev);
+ mgmt_powered(hdev, 0);
+ hci_dev_unlock(hdev);
+ }
}
/* Controller radio is available but is currently powered down */
- hdev->amp_status = 0;
+ hdev->amp_status = AMP_STATUS_POWERED_DOWN;
memset(hdev->eir, 0, sizeof(hdev->eir));
memset(hdev->dev_class, 0, sizeof(hdev->dev_class));
goto done;
}
+ if (hdev->dev_type != HCI_BREDR) {
+ err = -EOPNOTSUPP;
+ goto done;
+ }
+
if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) {
err = -EOPNOTSUPP;
goto done;
return;
}
- if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) {
+ /* During the HCI setup phase, a few error conditions are
+ * ignored and they need to be checked now. If they are still
+ * valid, it is important to turn the device back off.
+ */
+ if (test_bit(HCI_RFKILLED, &hdev->dev_flags) ||
+ (hdev->dev_type == HCI_BREDR &&
+ !bacmp(&hdev->bdaddr, BDADDR_ANY) &&
+ !bacmp(&hdev->static_addr, BDADDR_ANY))) {
clear_bit(HCI_AUTO_OFF, &hdev->dev_flags);
hci_dev_do_close(hdev);
} else if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) {
hdev->pkt_type = (HCI_DM1 | HCI_DH1 | HCI_HV1);
hdev->esco_type = (ESCO_HV1);
hdev->link_mode = (HCI_LM_ACCEPT);
- hdev->io_capability = 0x03; /* No Input No Output */
+ hdev->num_iac = 0x01; /* One IAC support is mandatory */
+ hdev->io_capability = 0x03; /* No Input No Output */
hdev->inq_tx_power = HCI_TX_POWER_INVALID;
hdev->adv_tx_power = HCI_TX_POWER_INVALID;
hdev->sniff_max_interval = 800;
hdev->sniff_min_interval = 80;
+ hdev->le_scan_interval = 0x0060;
+ hdev->le_scan_window = 0x0030;
+
mutex_init(&hdev->lock);
mutex_init(&hdev->req_lock);
set_bit(HCI_RFKILLED, &hdev->dev_flags);
set_bit(HCI_SETUP, &hdev->dev_flags);
+ set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
- if (hdev->dev_type != HCI_AMP) {
- set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
+ if (hdev->dev_type == HCI_BREDR) {
/* Assume BR/EDR support until proven otherwise (such as
* through reading supported features during init.
*/
EXPORT_SYMBOL(hci_resume_dev);
/* Receive frame from HCI drivers */
-int hci_recv_frame(struct sk_buff *skb)
+int hci_recv_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
- struct hci_dev *hdev = (struct hci_dev *) skb->dev;
if (!hdev || (!test_bit(HCI_UP, &hdev->flags)
&& !test_bit(HCI_INIT, &hdev->flags))) {
kfree_skb(skb);
scb->expect = hlen;
scb->pkt_type = type;
- skb->dev = (void *) hdev;
hdev->reassembly[index] = skb;
}
/* Complete frame */
bt_cb(skb)->pkt_type = type;
- hci_recv_frame(skb);
+ hci_recv_frame(hdev, skb);
hdev->reassembly[index] = NULL;
return remain;
}
EXPORT_SYMBOL(hci_unregister_cb);
-static int hci_send_frame(struct sk_buff *skb)
+static void hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
{
- struct hci_dev *hdev = (struct hci_dev *) skb->dev;
-
- if (!hdev) {
- kfree_skb(skb);
- return -ENODEV;
- }
-
BT_DBG("%s type %d len %d", hdev->name, bt_cb(skb)->pkt_type, skb->len);
/* Time stamp */
/* Get rid of skb owner, prior to sending to the driver. */
skb_orphan(skb);
- return hdev->send(skb);
+ if (hdev->send(hdev, skb) < 0)
+ BT_ERR("%s sending frame failed", hdev->name);
}
void hci_req_init(struct hci_request *req, struct hci_dev *hdev)
BT_DBG("skb len %d", skb->len);
bt_cb(skb)->pkt_type = HCI_COMMAND_PKT;
- skb->dev = (void *) hdev;
return skb;
}
do {
skb = list; list = list->next;
- skb->dev = (void *) hdev;
bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT;
hci_add_acl_hdr(skb, conn->handle, flags);
BT_DBG("%s chan %p flags 0x%4.4x", hdev->name, chan, flags);
- skb->dev = (void *) hdev;
-
hci_queue_acl(chan, &chan->data_q, skb, flags);
queue_work(hdev->workqueue, &hdev->tx_work);
skb_reset_transport_header(skb);
memcpy(skb_transport_header(skb), &hdr, HCI_SCO_HDR_SIZE);
- skb->dev = (void *) hdev;
bt_cb(skb)->pkt_type = HCI_SCODATA_PKT;
skb_queue_tail(&conn->data_q, skb);
hci_conn_enter_active_mode(chan->conn,
bt_cb(skb)->force_active);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
hdev->acl_last_tx = jiffies;
hdev->acl_cnt--;
hci_conn_enter_active_mode(chan->conn,
bt_cb(skb)->force_active);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
hdev->acl_last_tx = jiffies;
hdev->block_cnt -= blocks;
while (hdev->sco_cnt && (conn = hci_low_sent(hdev, SCO_LINK, "e))) {
while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
BT_DBG("skb %p len %d", skb, skb->len);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
conn->sent++;
if (conn->sent == ~0)
"e))) {
while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
BT_DBG("skb %p len %d", skb, skb->len);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
conn->sent++;
if (conn->sent == ~0)
skb = skb_dequeue(&chan->data_q);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
hdev->le_last_tx = jiffies;
cnt--;
/* Send next queued raw (unknown type) packet */
while ((skb = skb_dequeue(&hdev->raw_q)))
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
}
/* ----- HCI RX task (incoming data processing) ----- */
hdev->sent_cmd = skb_clone(skb, GFP_KERNEL);
if (hdev->sent_cmd) {
atomic_dec(&hdev->cmd_cnt);
- hci_send_frame(skb);
+ hci_send_frame(hdev, skb);
if (test_bit(HCI_RESET, &hdev->flags))
del_timer(&hdev->cmd_timer);
else
}
}
}
-
-u8 bdaddr_to_le(u8 bdaddr_type)
-{
- switch (bdaddr_type) {
- case BDADDR_LE_PUBLIC:
- return ADDR_LE_DEV_PUBLIC;
-
- default:
- /* Fallback to LE Random address type */
- return ADDR_LE_DEV_RANDOM;
- }
-}
projects / karo-tx-linux.git / blobdiff