X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;ds=sidebyside;f=board%2FMarvell%2Fguruplug%2Fguruplug.c;h=b0d5f1e10f4ddf46a4f21371a3f5edaaa22af10f;hb=0ce4af99c07acebf4fce9a91f1099d2460629293;hp=72bccc821ce2cc2b7d9fe21e83382f0546a9663e;hpb=326ea986ac150acdc7656d57fca647db80b50158;p=karo-tx-uboot.git

diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c
index 72bccc821c..b0d5f1e10f 100644
--- a/board/Marvell/guruplug/guruplug.c
+++ b/board/Marvell/guruplug/guruplug.c
@@ -9,7 +9,7 @@
 #include <common.h>
 #include <miiphy.h>
 #include <asm/arch/cpu.h>
-#include <asm/arch/kirkwood.h>
+#include <asm/arch/soc.h>
 #include <asm/arch/mpp.h>
 #include "guruplug.h"
 
@@ -22,9 +22,9 @@ int board_early_init_f(void)
 	 * There are maximum 64 gpios controlled through 2 sets of registers
 	 * the  below configuration configures mainly initial LED status
 	 */
-	kw_config_gpio(GURUPLUG_OE_VAL_LOW,
-			GURUPLUG_OE_VAL_HIGH,
-			GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH);
+	mvebu_config_gpio(GURUPLUG_OE_VAL_LOW,
+			  GURUPLUG_OE_VAL_HIGH,
+			  GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH);
 
 	/* Multi-Purpose Pins Functionality configuration */
 	static const u32 kwmpp_config[] = {
@@ -92,7 +92,7 @@ int board_init(void)
 	gd->bd->bi_arch_number = MACH_TYPE_GURUPLUG;
 
 	/* adress of boot parameters */
-	gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
 
 	return 0;
 }