X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Flubbock.h;h=0a1d1e09a66bc4ce07275d577fe6d1c3f61e0c95;hb=6e2fbdea1b26d75314d87c380a36b0015bf824cf;hp=2cf9c028159763bf1466435e116c6e5fb227554d;hpb=712ac6a1a6909a58d6549fb220cc921a7e9f9979;p=karo-tx-uboot.git

diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index 2cf9c02815..0a1d1e09a6 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -34,36 +34,35 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_PXA250		1	/* This is an PXA250 CPU    */
+#define CONFIG_CPU_PXA25X		1	/* This is an PXA250 CPU    */
 #define CONFIG_LUBBOCK		1	/* on an LUBBOCK Board	    */
 #define CONFIG_LCD		1
 #ifdef CONFIG_LCD
 #define CONFIG_SHARP_LM8V31
 #endif
 #define CONFIG_MMC
-#define BOARD_LATE_INIT		1
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_DOS_PARTITION
-
-#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+#define	CONFIG_SYS_TEXT_BASE	0x0
 
 /* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_NO_DCACHE
+#define CONFIG_SYS_DCACHE_OFF
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
 
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96
+#define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x0C000000
 
 /*
  * select serial console configuration
  */
+#define CONFIG_PXA_SERIAL
 #define CONFIG_FFUART	       1       /* we use FFUART on LUBBOCK */
 
 /* allow to overwrite serial and ethaddr */
@@ -108,7 +107,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_HUSH_PARSER		1
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 #define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
 #ifdef CONFIG_SYS_HUSH_PARSER
@@ -130,26 +128,12 @@
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
 
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
 #ifdef CONFIG_MMC
 #define CONFIG_PXA_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
 #endif
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
 /*
  * Physical Memory Map
  */
@@ -174,6 +158,9 @@
 
 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
 
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define	CONFIG_SYS_INIT_SP_ADDR		0xfffff800
+
 #define FPGA_REGS_BASE_PHYSICAL 0x08000000
 
 /*
@@ -197,6 +184,9 @@
 
 #define CONFIG_SYS_PSSR_VAL		0x20
 
+#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
+#define	CONFIG_SYS_CKEN			0x0
+
 /*
  * Memory settings
  */
@@ -207,6 +197,9 @@
 #define CONFIG_SYS_MDREFR_VAL		0x00018018
 #define CONFIG_SYS_MDMRS_VAL		0x00000000
 
+#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define	CONFIG_SYS_SXCNFG_VAL		0x00000000
+
 /*
  * PCMCIA and CF Interfaces
  */