X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=Makefile;h=fb658f4e43eac9e60318da2472c398a40cd2abe4;hb=4233fafe9e190fa57db6ca913978b02789bc98f7;hp=dfe939f1ba8713d6d039fc7d7a7b840284eb8a56;hpb=bc196029f53c2d82eb9a12eb8b66e696b6284941;p=karo-tx-uboot.git

diff --git a/Makefile b/Makefile
index dfe939f1ba..fb658f4e43 100644
--- a/Makefile
+++ b/Makefile
@@ -24,14 +24,14 @@
 VERSION = 2011
 PATCHLEVEL = 09
 SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION)
 endif
-TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h
-VERSION_FILE = $(obj)include/version_autogenerated.h
+TIMESTAMP_FILE = $(obj)include/generated/timestamp_autogenerated.h
+VERSION_FILE = $(obj)include/generated/version_autogenerated.h
 
 HOSTARCH := $(shell uname -m | \
 	sed -e s/i.86/x86/ \
@@ -137,11 +137,13 @@ unexport CDPATH
 
 # The "tools" are needed early, so put this first
 # Don't include stuff already done in $(LIBS)
-SUBDIRS	= tools \
-	  examples/standalone \
-	  examples/api
+# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
+# is "yes"), so compile examples after U-Boot is compiled.
+SUBDIR_TOOLS = tools
+SUBDIR_EXAMPLES = examples/standalone examples/api
+SUBDIRS = $(SUBDIR_TOOLS)
 
-.PHONY : $(SUBDIRS) $(VERSION_FILE)
+.PHONY : $(SUBDIRS) $(VERSION_FILE) $(TIMESTAMP_FILE)
 
 ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
 
@@ -152,6 +154,10 @@ all:
 sinclude $(obj)include/autoconf.mk.dep
 sinclude $(obj)include/autoconf.mk
 
+ifndef CONFIG_SANDBOX
+SUBDIRS += $(SUBDIR_EXAMPLES)
+endif
+
 # load ARCH, BOARD, and CPU configuration
 include $(obj)include/config.mk
 export	ARCH CPU BOARD VENDOR SOC
@@ -224,6 +230,9 @@ endif
 ifeq ($(CPU),ixp)
 LIBS += arch/arm/cpu/ixp/npe/libnpe.o
 endif
+ifeq ($(CONFIG_OF_EMBED),y)
+LIBS += dts/libdts.o
+endif
 LIBS += arch/$(ARCH)/lib/lib$(ARCH).o
 LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \
 	fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \
@@ -253,10 +262,12 @@ LIBS += drivers/power/libpower.o
 LIBS += drivers/spi/libspi.o
 ifeq ($(CPU),mpc83xx)
 LIBS += drivers/qe/libqe.o
+LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
 LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
 endif
 ifeq ($(CPU),mpc85xx)
 LIBS += drivers/qe/libqe.o
+LIBS += drivers/net/fm/libfm.o
 LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o
 LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
 endif
@@ -279,13 +290,9 @@ LIBS += lib/libfdt/libfdt.o
 LIBS += api/libapi.o
 LIBS += post/libpost.o
 
-ifeq ($(SOC),omap3)
-LIBS += $(CPUDIR)/omap-common/libomap-common.o
-endif
-ifeq ($(SOC),omap4)
+ifneq ($(CONFIG_AM335X)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
 LIBS += $(CPUDIR)/omap-common/libomap-common.o
 endif
-
 ifeq ($(SOC),s5pc1xx)
 LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
 endif
@@ -294,7 +301,7 @@ LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
 endif
 
 LIBS := $(addprefix $(obj),$(sort $(LIBS)))
-.PHONY : $(LIBS) $(TIMESTAMP_FILE)
+.PHONY : $(LIBS)
 
 LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o
 LIBBOARD := $(addprefix $(obj),$(LIBBOARD))
@@ -307,7 +314,7 @@ else
 PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
 endif
 else
-PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
 endif
 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 export PLATFORM_LIBS
@@ -349,8 +356,16 @@ ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin
 ALL-$(CONFIG_MMC_U_BOOT) += $(obj)mmc_spl/u-boot-mmc-spl.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
+
+all:		$(ALL-y) $(SUBDIR_EXAMPLES)
+
+$(obj)u-boot.dtb:	$(obj)u-boot
+		$(MAKE) -C dts binary
+		mv $(obj)dts/dt.dtb $@
 
-all:		$(ALL-y)
+$(obj)u-boot-dtb.bin:	$(obj)u-boot.bin $(obj)u-boot.dtb
+		cat $^ >$@
 
 $(obj)u-boot.hex:	$(obj)u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
@@ -394,18 +409,34 @@ $(obj)u-boot.sha1:	$(obj)u-boot.bin
 $(obj)u-boot.dis:	$(obj)u-boot
 		$(OBJDUMP) -d $< > $@
 
-$(obj)u-boot.ubl:       $(obj)u-boot-nand.bin
+$(obj)u-boot.ubl:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $(obj)u-boot-ubl.bin
 		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
-		-e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+		-e $(CONFIG_SYS_TEXT_BASE) -d $(obj)u-boot-ubl.bin $(obj)u-boot.ubl
+		rm $(obj)u-boot-ubl.bin
+		rm $(obj)spl/u-boot-spl-pad.bin
+
+$(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
+		elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd \
+			-o $(obj)u-boot.sb
 
+ifeq ($(CONFIG_SANDBOX),y)
+GEN_UBOOT = \
+		cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
+			-Wl,--start-group $(__LIBS) -Wl,--end-group \
+			$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
+else
 GEN_UBOOT = \
 		UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
 		sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
 		cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \
 			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 			-Map u-boot.map -o u-boot
+endif
+
 $(obj)u-boot:	depend \
-		$(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
+		$(SUBDIR_TOOLS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds
 		$(GEN_UBOOT)
 ifeq ($(CONFIG_KALLSYMS),y)
 		smap=`$(call SYSTEM_MAP,u-boot) | \
@@ -418,7 +449,7 @@ endif
 $(OBJS):	depend
 		$(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@))
 
-$(LIBS):	depend $(SUBDIRS)
+$(LIBS):	depend $(SUBDIR_TOOLS)
 		$(MAKE) -C $(dir $(subst $(obj),,$@))
 
 $(LIBBOARD):	depend $(LIBS)
@@ -427,6 +458,8 @@ $(LIBBOARD):	depend $(LIBS)
 $(SUBDIRS):	depend
 		$(MAKE) -C $@ all
 
+$(SUBDIR_EXAMPLES): $(obj)u-boot
+
 $(LDSCRIPT):	depend
 		$(MAKE) -C $(dir $@) $(notdir $@)
 
@@ -453,10 +486,6 @@ $(obj)mmc_spl/u-boot-mmc-spl.bin:	mmc_spl
 $(obj)spl/u-boot-spl.bin:		depend
 		$(MAKE) -C spl all
 
-$(TIMESTAMP_FILE):
-		@LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@
-		@LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@
-
 updater:
 		$(MAKE) -C tools/updater all
 
@@ -505,7 +534,7 @@ $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
 	@$(XECHO) Generating $@ ; \
 	set -e ; \
 	: Generate the dependancies ; \
-	$(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \
+	$(CC) -x c -DDO_DEPS_ONLY -M $(CFLAGS) $(CPPFLAGS) \
 		-MQ $(obj)include/autoconf.mk include/common.h > $@
 
 $(obj)include/autoconf.mk: $(obj)include/config.h
@@ -547,12 +576,12 @@ $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s:	$(obj)include/autoconf.mk.dep
 else	# !config.mk
 all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
 $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
-$(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) \
+$(filter-out tools,$(SUBDIRS)) \
 updater depend dep tags ctags etags cscope $(obj)System.map:
 	@echo "System not configured - see README" >&2
 	@ exit 1
 
-tools: $(VERSION_FILE)
+tools: $(VERSION_FILE) $(TIMESTAMP_FILE)
 	$(MAKE) -C $@ all
 endif	# config.mk
 
@@ -570,11 +599,17 @@ $(VERSION_FILE):
 		 '$(shell $(LD) -v | head -n 1)' )>>  $@.tmp
 		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
 
+$(TIMESTAMP_FILE):
+		@mkdir -p $(dir $(TIMESTAMP_FILE))
+		@LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@.tmp
+		@LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@.tmp
+		@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
+
 easylogo env gdb:
 	$(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION}
 gdbtools: gdb
 
-tools-all: easylogo env gdb $(VERSION_FILE)
+tools-all: easylogo env gdb $(VERSION_FILE) $(TIMESTAMP_FILE)
 	$(MAKE) -C tools HOST_TOOLS_ALL=y
 
 .PHONY : CHANGELOG
@@ -604,213 +639,6 @@ $(obj).boards.depend:	boards.cfg
 lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
 ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 
-#########################################################################
-## Coldfire
-#########################################################################
-
-astro_mcf5373l_config \
-astro_mcf5373l_RAM_config :	unconfig
-	@$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro
-
-M52277EVB_config \
-M52277EVB_spansion_config \
-M52277EVB_stmicro_config :	unconfig
-	@case "$@" in \
-	M52277EVB_config)		FLASH=SPANSION;; \
-	M52277EVB_spansion_config)	FLASH=SPANSION;; \
-	M52277EVB_stmicro_config)	FLASH=STMICRO;; \
-	esac; \
-	if [ "$${FLASH}" = "SPANSION" ] ; then \
-		echo "#define CONFIG_SYS_SPANSION_BOOT"	>> $(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
-		cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
-	fi; \
-	if [ "$${FLASH}" = "STMICRO" ] ; then \
-		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
-		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
-		cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
-	fi
-	@$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
-
-M5235EVB_config \
-M5235EVB_Flash16_config \
-M5235EVB_Flash32_config:	unconfig
-	@case "$@" in \
-	M5235EVB_config)		FLASH=16;; \
-	M5235EVB_Flash16_config)	FLASH=16;; \
-	M5235EVB_Flash32_config)	FLASH=32;; \
-	esac; \
-	if [ "$${FLASH}" != "16" ] ; then \
-		echo "#define NORFLASH_PS32BIT	1" >> $(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
-		cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
-	else \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
-		cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
-	fi
-	@$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
-
-cobra5272_config :		unconfig
-	@$(MKCONFIG) $@ m68k mcf52x2 cobra5272
-
-EB+MCF-EV123_config :		unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
-	@echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
-	@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-EB+MCF-EV123_internal_config :	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/BuS/EB+MCF-EV123
-	@echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
-	@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
-
-M5329AFEE_config \
-M5329BFEE_config :	unconfig
-	@case "$@" in \
-	M5329AFEE_config)	NAND=0;; \
-	M5329BFEE_config)	NAND=16;; \
-	esac; \
-	if [ "$${NAND}" != "0" ] ; then \
-		echo "#define NANDFLASH_SIZE	$${NAND}" > $(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale
-
-M5373EVB_config :	unconfig
-	@case "$@" in \
-	M5373EVB_config)	NAND=16;; \
-	esac; \
-	if [ "$${NAND}" != "0" ] ; then \
-		echo "#define NANDFLASH_SIZE	$${NAND}" > $(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
-
-M54451EVB_config \
-M54451EVB_stmicro_config :	unconfig
-	@case "$@" in \
-	M54451EVB_config)		FLASH=NOR;; \
-	M54451EVB_stmicro_config)	FLASH=STMICRO;; \
-	esac; \
-	if [ "$${FLASH}" = "NOR" ] ; then \
-		echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
-		cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
-	fi; \
-	if [ "$${FLASH}" = "STMICRO" ] ; then \
-		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
-		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
-		cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
-	fi; \
-	echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
-	@$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale
-
-M54455EVB_config \
-M54455EVB_atmel_config \
-M54455EVB_intel_config \
-M54455EVB_a33_config \
-M54455EVB_a66_config \
-M54455EVB_i33_config \
-M54455EVB_i66_config \
-M54455EVB_stm33_config :	unconfig
-	@case "$@" in \
-	M54455EVB_config)		FLASH=ATMEL; FREQ=33333333;; \
-	M54455EVB_atmel_config)		FLASH=ATMEL; FREQ=33333333;; \
-	M54455EVB_intel_config)		FLASH=INTEL; FREQ=33333333;; \
-	M54455EVB_a33_config)		FLASH=ATMEL; FREQ=33333333;; \
-	M54455EVB_a66_config)		FLASH=ATMEL; FREQ=66666666;; \
-	M54455EVB_i33_config)		FLASH=INTEL; FREQ=33333333;; \
-	M54455EVB_i66_config)		FLASH=INTEL; FREQ=66666666;; \
-	M54455EVB_stm33_config)		FLASH=STMICRO; FREQ=33333333;; \
-	esac; \
-	if [ "$${FLASH}" = "INTEL" ] ; then \
-		echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
-		cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
-	fi; \
-	if [ "$${FLASH}" = "ATMEL" ] ; then \
-		echo "#define CONFIG_SYS_ATMEL_BOOT"	>> $(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
-		cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
-	fi; \
-	if [ "$${FLASH}" = "STMICRO" ] ; then \
-		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
-		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
-		cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
-	fi; \
-	echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
-	$(XECHO) "... with $${FREQ}Hz input clock"
-	@$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale
-
-M5475AFE_config \
-M5475BFE_config \
-M5475CFE_config \
-M5475DFE_config \
-M5475EFE_config \
-M5475FFE_config \
-M5475GFE_config :	unconfig
-	@case "$@" in \
-	M5475AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
-	M5475BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
-	M5475CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
-	M5475DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
-	M5475EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
-	M5475FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
-	M5475GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
-	esac; \
-	echo "#define CONFIG_SYS_BUSCLK	133333333" > $(obj)include/config.h ; \
-	echo "#define CONFIG_SYS_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
-	echo "#define CONFIG_SYS_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
-	if [ "$${RAM1}" != "0" ] ; then \
-		echo "#define CONFIG_SYS_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
-	fi; \
-	if [ "$${CODE}" != "0" ] ; then \
-		echo "#define CONFIG_SYS_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
-	fi; \
-	if [ "$${VID}" == "1" ] ; then \
-		echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
-	fi; \
-	if [ "$${USB}" == "1" ] ; then \
-		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale
-
-M5485AFE_config \
-M5485BFE_config \
-M5485CFE_config \
-M5485DFE_config \
-M5485EFE_config \
-M5485FFE_config \
-M5485GFE_config \
-M5485HFE_config :	unconfig
-	@case "$@" in \
-	M5485AFE_config)	BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
-	M5485BFE_config)	BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
-	M5485CFE_config)	BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
-	M5485DFE_config)	BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
-	M5485EFE_config)	BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
-	M5485FFE_config)	BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
-	M5485GFE_config)	BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
-	M5485HFE_config)	BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
-	esac; \
-	echo "#define CONFIG_SYS_BUSCLK	100000000" > $(obj)include/config.h ; \
-	echo "#define CONFIG_SYS_BOOTSZ	$${BOOT}" >> $(obj)include/config.h ; \
-	echo "#define CONFIG_SYS_DRAMSZ	$${RAM}" >> $(obj)include/config.h ; \
-	if [ "$${RAM1}" != "0" ] ; then \
-		echo "#define CONFIG_SYS_DRAMSZ1	$${RAM1}" >> $(obj)include/config.h ; \
-	fi; \
-	if [ "$${CODE}" != "0" ] ; then \
-		echo "#define CONFIG_SYS_NOR1SZ	$${CODE}" >> $(obj)include/config.h ; \
-	fi; \
-	if [ "$${VID}" == "1" ] ; then \
-		echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \
-	fi; \
-	if [ "$${USB}" == "1" ] ; then \
-		echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
-
 #========================================================================
 # ARM
 #========================================================================
@@ -864,10 +692,6 @@ SX1_config:		unconfig
 	fi;
 	@$(MKCONFIG) -n $@ SX1 arm arm925t sx1
 
-tx25_config	: unconfig
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
-
 #########################################################################
 ## XScale Systems
 #########################################################################
@@ -890,24 +714,6 @@ apollon_config		: unconfig
 	@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
 	@$(MKCONFIG) $@ arm arm1136 apollon - omap24xx
 
-imx31_phycore_eet_config \
-imx31_phycore_config	: unconfig
-	@mkdir -p $(obj)include
-	@if [ -n "$(findstring _eet_,$@)" ]; then			\
-		echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h;	\
-	fi
-	@$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31
-
-mx31pdk_config \
-mx31pdk_nand_config	: unconfig
-	@mkdir -p $(obj)include
-	@if [ -n "$(findstring _nand_,$@)" ]; then					\
-		echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h;		\
-	else										\
-		echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h;	\
-	fi
-	@$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31
-
 #########################################################################
 ## ARM1176 Systems
 #########################################################################
@@ -954,6 +760,7 @@ clean:
 	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]	  \
 	       $(obj)arch/blackfin/cpu/init.{lds,elf}
 	@rm -f $(obj)include/bmp_logo.h
+	@rm -f $(obj)include/bmp_logo_data.h
 	@rm -f $(obj)lib/asm-offsets.s
 	@rm -f $(obj)include/generated/asm-offsets.h
 	@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
@@ -963,6 +770,7 @@ clean:
 	@rm -f $(ONENAND_BIN)
 	@rm -f $(obj)onenand_ipl/u-boot.lds
 	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
+	@rm -f $(obj)MLO
 	@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
 	@find $(OBJTREE) -type f \
 		\( -name 'core' -o -name '*.bak' -o -name '*~' \
@@ -970,7 +778,7 @@ clean:
 		| xargs rm -f
 
 clobber:	clean
-	@find $(OBJTREE) -type f \( -name '*.depend' \
+	@find $(OBJTREE) -type f \( -name '*.depend*' \
 		-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
 		-print0 \
 		| xargs -0 rm -f
@@ -980,6 +788,8 @@ clobber:	clean
 	@rm -f $(obj)u-boot.kwb
 	@rm -f $(obj)u-boot.imx
 	@rm -f $(obj)u-boot.ubl
+	@rm -f $(obj)u-boot.dtb
+	@rm -f $(obj)u-boot.sb
 	@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
 	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
 	@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@@ -987,6 +797,7 @@ clobber:	clean
 	@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
 	@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
 	@[ ! -d $(obj)mmc_spl ] || find $(obj)mmc_spl -name "*" -type l -print | xargs rm -f
+	@rm -f $(obj)dts/*.tmp
 
 mrproper \
 distclean:	clobber unconfig