X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=Makefile;h=ff72deb831a2dc77c9d4dcef19d4716b999bdf48;hb=bb1e7cde624d44edf75c1b607fd6c60e038f98dd;hp=f2882a17c36742b2f9a1bd9a7d550ebf719287fe;hpb=5364add4ef90c058bea8b3eceb2a559c0a983537;p=karo-tx-uboot.git

diff --git a/Makefile b/Makefile
index f2882a17c3..ff72deb831 100644
--- a/Makefile
+++ b/Makefile
@@ -24,7 +24,7 @@
 VERSION = 2013
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -231,8 +231,8 @@ endif
 
 OBJS  = $(CPUDIR)/start.o
 ifeq ($(CPU),x86)
-OBJS += $(CPUDIR)/start16.o
-OBJS += $(CPUDIR)/resetvec.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/start16.o
+RESET_OBJS-$(CONFIG_X86_NO_RESET_VECTOR) += $(CPUDIR)/resetvec.o
 endif
 ifeq ($(CPU),ppc4xx)
 OBJS += $(CPUDIR)/resetvec.o
@@ -241,7 +241,7 @@ ifeq ($(CPU),mpc85xx)
 OBJS += $(CPUDIR)/resetvec.o
 endif
 
-OBJS := $(addprefix $(obj),$(OBJS))
+OBJS := $(addprefix $(obj),$(OBJS) $(RESET_OBJS-))
 
 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard board/$(VENDOR)/common/Makefile),y,n)
 
@@ -316,12 +316,14 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
 endif
 LIBS-y += drivers/rtc/librtc.o
 LIBS-y += drivers/serial/libserial.o
+LIBS-y += drivers/sound/libsound.o
 LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
 LIBS-y += drivers/twserial/libtws.o
 LIBS-y += drivers/usb/eth/libusb_eth.o
 LIBS-y += drivers/usb/gadget/libusb_gadget.o
 LIBS-y += drivers/usb/host/libusb_host.o
 LIBS-y += drivers/usb/musb/libusb_musb.o
+LIBS-y += drivers/usb/musb-new/libusb_musb-new.o
 LIBS-y += drivers/usb/phy/libusb_phy.o
 LIBS-y += drivers/usb/ulpi/libusb_ulpi.o
 LIBS-y += drivers/video/libvideo.o
@@ -346,7 +348,7 @@ endif
 ifeq ($(SOC),exynos)
 LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
 endif
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
 LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
 LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
@@ -389,12 +391,12 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD))
 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 BOARD_SIZE_CHECK = \
 	@actual=`wc -c $@ | awk '{print $$1}'`; \
-	limit=$(CONFIG_BOARD_SIZE_LIMIT); \
+	limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
 	if test $$actual -gt $$limit; then \
-		echo "$@ exceeds file size limit:"; \
-		echo "  limit:  $$limit bytes"; \
-		echo "  actual: $$actual bytes"; \
-		echo "  excess: $$((actual - limit)) bytes"; \
+		echo "$@ exceeds file size limit:" >&2 ; \
+		echo "  limit:  $$limit bytes" >&2 ; \
+		echo "  actual: $$actual bytes" >&2 ; \
+		echo "  excess: $$((actual - limit)) bytes" >&2; \
 		exit 1; \
 	fi
 else
@@ -407,10 +409,11 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
 ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin
 ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin
 ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin
+ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET))
 ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin
 
 # enable combined SPL/u-boot/dtb rules for tegra
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 ifeq ($(CONFIG_OF_SEPARATE),y)
 ALL-y += $(obj)u-boot-dtb-tegra.bin
 else
@@ -448,9 +451,18 @@ $(obj)u-boot.ldr.hex:	$(obj)u-boot.ldr
 $(obj)u-boot.ldr.srec:	$(obj)u-boot.ldr
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
 
+#
+# U-Boot entry point, needed for booting of full-blown U-Boot
+# from the SPL U-Boot version.
+#
+ifndef CONFIG_SYS_UBOOT_START
+CONFIG_SYS_UBOOT_START := 0
+endif
+
 $(obj)u-boot.img:	$(obj)u-boot.bin
 		$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
+		-O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
+		-e $(CONFIG_SYS_UBOOT_START) \
 		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
 			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
 		-d $< $@
@@ -499,7 +511,7 @@ $(obj)u-boot.ais:       $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
 ELFTOSB_TARGET-$(CONFIG_MX28) = imx28
 
 $(obj)u-boot.sb:       $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
-		elftosb -zdf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
+		elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \
 			-o $(obj)u-boot.sb
 
 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
@@ -518,7 +530,7 @@ $(obj)u-boot.spr:	$(obj)u-boot.img $(obj)spl/u-boot-spl.bin
 			conv=notrunc 2>/dev/null
 		cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
 
-ifeq ($(SOC),tegra20)
+ifneq ($(CONFIG_TEGRA),)
 ifeq ($(CONFIG_OF_SEPARATE),y)
 nodtb=dtb
 dtbfile=$(obj)u-boot.dtb
@@ -533,6 +545,9 @@ $(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtb
 		rm $(obj)spl/u-boot-spl-pad.bin
 endif
 
+$(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
+		cat $(obj)spl/u-boot-spl.bin $(obj)u-boot.img > $@
+
 ifeq ($(CONFIG_SANDBOX),y)
 GEN_UBOOT = \
 		cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -642,6 +657,16 @@ checkthumb:
 		echo '*** Your board is configured for THUMB mode.'; \
 		false; \
 	fi
+
+# GCC 3.x is reported to have problems generating the type of relocation
+# that U-Boot wants.
+# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
+checkgcc4:
+	@if test $(call cc-version) -lt 0400; then \
+		echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
+		false; \
+	fi
+
 #
 # Auto-generate the autoconf.mk file (which is included by all makefiles)
 #
@@ -844,7 +869,8 @@ clobber:	tidy
 	@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
 	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
 	@rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
-	@rm -f $(obj)MLO
+	@rm -f $(obj)MLO MLO.byteswap
+	@rm -f $(obj)SPL
 	@rm -f $(obj)tools/xway-swap-bytes
 	@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
 	@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c