X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=board%2Fbf533-ezkit%2Fbf533-ezkit.c;h=81e390c93fbddf44b1b06e5db8f196daaf547f3d;hb=8b485ba12b0defa0c4ed3559789250238f8331a8;hp=1dd4a3fe2e0af9c9139a13a13478a43c625e84a7;hpb=43f6226db002af1d1ff1adf35b422dcce9f76f76;p=karo-tx-uboot.git

diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c
index 1dd4a3fe2e..81e390c93f 100644
--- a/board/bf533-ezkit/bf533-ezkit.c
+++ b/board/bf533-ezkit/bf533-ezkit.c
@@ -1,80 +1,44 @@
 /*
- * U-boot - ezkit533.c
+ * U-boot - main board file
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright (c) 2005-2008 Analog Devices Inc.
  *
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
-#if defined(CONFIG_MISC_INIT_R)
+#include <netdev.h>
 #include "psd4256.h"
-#endif
+#include "flash-defines.h"
+
+DECLARE_GLOBAL_DATA_PTR;
 
 int checkboard(void)
 {
-#if (BFIN_CPU == ADSP_BF531)
-	printf("CPU:   ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28);
-#elif (BFIN_CPU == ADSP_BF532)
-	printf("CPU:   ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28);
-#else
-	printf("CPU:   ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
-#endif
 	printf("Board: ADI BF533 EZ-Kit Lite board\n");
 	printf("       Support: http://blackfin.uclinux.org/\n");
 	return 0;
 }
 
-long int initdram(int board_type)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-#ifdef DEBUG
-	int brate;
-	char *tmp = getenv("baudrate");
-	brate = simple_strtoul(tmp, NULL, 16);
-	printf("Serial Port initialized with Baud rate = %x\n", brate);
-	printf("SDRAM attributes:\n");
-	printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles"
-	       "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n",
-	       3, 3, 6, 2, 3);
-	printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE);
-	printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20);
-#endif
-	gd->bd->bi_memstart = CFG_SDRAM_BASE;
-	gd->bd->bi_memsize = CFG_MAX_RAM_SIZE;
-	return CFG_MAX_RAM_SIZE;
-}
-
-#if defined(CONFIG_MISC_INIT_R)
 /* miscellaneous platform dependent initialisations */
 int misc_init_r(void)
 {
 	/* Set direction bits for Video en/decoder reset as output      */
-	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) =
+	*(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DIR) =
 	    PSDA_VDEC_RST | PSDA_VENC_RST;
 	/* Deactivate Video en/decoder reset lines                      */
-	*(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) =
+	*(volatile unsigned char *)(CONFIG_SYS_FLASH1_BASE + PSD_PORTA_DOUT) =
 	    PSDA_VDEC_RST | PSDA_VENC_RST;
 
 	return 0;
 }
+
+#ifdef CONFIG_SMC91111
+int board_eth_init(bd_t *bis)
+{
+	return smc91111_initialize(0, CONFIG_SMC91111_BASE);
+}
 #endif