X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=board%2Fphytec%2Fpcm051%2Fboard.c;h=17a98ff860097dae95bfe6fa679dbe4c444a27da;hb=94d77fb656d49f2b0efe2de5605a52c5145d2c3b;hp=55bc01871457a716afe152e6d1a85128e1a6423c;hpb=1c1b7c3739095da7d73fef3adbe9f187791ca9ff;p=karo-tx-uboot.git

diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 55bc018714..17a98ff860 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -6,15 +6,7 @@
  * Copyright (C) 2013 Lemonage Software GmbH
  * Author Lars Poeschel <poeschel@lemonage.de>
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
@@ -39,9 +31,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-#ifdef CONFIG_SPL_BUILD
-static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-#endif
 
 /* MII mode defines */
 #define MII_MODE_ENABLE		0x0
@@ -50,29 +39,18 @@ static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
 
 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 
-/* UART defines */
 #ifdef CONFIG_SPL_BUILD
-#define UART_RESET		(0x1 << 1)
-#define UART_CLK_RUNNING_MASK	0x1
-#define UART_SMART_IDLE_EN	(0x1 << 0x3)
 
 /* DDR RAM defines */
 #define DDR_CLK_MHZ		303 /* DDR_DPLL_MULT value */
 
-static void rtc32k_enable(void)
-{
-	struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE;
+#define OSC	(V_OSCK/1000000)
+const struct dpll_params dpll_ddr = {
+		DDR_CLK_MHZ, OSC-1, 1, -1, -1, -1, -1};
 
-	/*
-	 * Unlock the RTC's registers.  For more details please see the
-	 * RTC_SS section of the TRM.  In order to unlock we need to
-	 * write these specific values (keys) in this order.
-	 */
-	writel(0x83e70b13, &rtc->kick0r);
-	writel(0x95a4f1e0, &rtc->kick1r);
-
-	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
-	writel((1 << 3) | (1 << 6), &rtc->osc);
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+	return &dpll_ddr;
 }
 
 static const struct ddr_data ddr3_data = {
@@ -104,7 +82,8 @@ static struct emif_regs ddr3_emif_reg_data = {
 	.sdram_tim2 = MT41J256M8HX15E_EMIF_TIM2,
 	.sdram_tim3 = MT41J256M8HX15E_EMIF_TIM3,
 	.zq_config = MT41J256M8HX15E_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY,
+	.emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY |
+				PHY_EN_DYN_PWRDN,
 };
 #endif
 
@@ -113,6 +92,15 @@ static struct emif_regs ddr3_emif_reg_data = {
  */
 void s_init(void)
 {
+	/*
+	 * Save the boot parameters passed from romcode.
+	 * We cannot delay the saving further than this,
+	 * to prevent overwrites.
+	 */
+#ifdef CONFIG_SPL_BUILD
+	save_omap_boot_params();
+#endif
+
 	/*
 	 * WDT1 is already running when the bootloader gets control
 	 * Disable it to avoid "random" resets
@@ -131,22 +119,8 @@ void s_init(void)
 	/* Enable RTC32K clock */
 	rtc32k_enable();
 
-	/* UART softreset */
-	u32 regval;
-
 	enable_uart0_pin_mux();
-
-	regval = readl(&uart_base->uartsyscfg);
-	regval |= UART_RESET;
-	writel(regval, &uart_base->uartsyscfg);
-	while ((readl(&uart_base->uartsyssts) &	UART_CLK_RUNNING_MASK)
-		!= UART_CLK_RUNNING_MASK)
-		;
-
-	/* Disable smart idle */
-	regval = readl(&uart_base->uartsyscfg);
-	regval |= UART_SMART_IDLE_EN;
-	writel(regval, &uart_base->uartsyscfg);
+	uart_soft_reset();
 
 	gd = &gdata;
 
@@ -159,7 +133,7 @@ void s_init(void)
 	enable_board_pin_mux();
 
 	config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data,
-			&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data);
+			&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
 #endif
 }
 
@@ -199,8 +173,8 @@ static struct cpsw_slave_data cpsw_slaves[] = {
 };
 
 static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= AM335X_CPSW_MDIO_BASE,
-	.cpsw_base		= AM335X_CPSW_BASE,
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
 	.mdio_div		= 0xff,
 	.channels		= 8,
 	.cpdma_reg_ofs		= 0x800,