X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=doc%2FREADME.falcon;h=e9f8a7583c721cd96eb364ff23d591c0284c70b3;hb=5d6562f11a7e9a27cbc97e98fc608e7ed2bb7477;hp=bccf6c95c869388ae6824a50ccb25e378d925104;hpb=3523df0078b08e43b868da0680e617e75eca2581;p=karo-tx-uboot.git

diff --git a/doc/README.falcon b/doc/README.falcon
index bccf6c95c8..e9f8a7583c 100644
--- a/doc/README.falcon
+++ b/doc/README.falcon
@@ -31,9 +31,10 @@ informed to load it before running the kernel.
 To boot the kernel, these steps under a Falcon-aware U-Boot are required:
 
 1. Boot the board into U-Boot.
-Use the "spl export" command to generate the kernel parameters area or the DT.
-U-Boot runs as when it boots the kernel, but stops before passing the control
-to the kernel.
+After loading the desired legacy-format kernel image into memory (and DT as
+well, if used), use the "spl export" command to generate the kernel parameters
+area or the DT.  U-Boot runs as when it boots the kernel, but stops before
+passing the control to the kernel.
 
 2. Save the prepared snapshot into persistent media.
 The address where to save it must be configured into board configuration
@@ -89,6 +90,10 @@ mode.  In this case the following variables may be supported:
 boot_os : 		Set to yes/Yes/true/True/1 to enable booting to OS,
 			any other value to fall back to U-Boot (including
 			unset)
+falcon_args_file :	Filename to load as the 'args' portion of falcon mode
+			rather than the hard-coded value.
+falcon_image_file :	Filename to load as the OS image portion of falcon
+			mode rather than the hard-coded value.
 
 Using spl command
 -----------------