X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2FCPC45.h;h=a75c52f2c714f94957100c0025e9a8885b3e4615;hb=52de0e49dfdc6f1dd55f31e312a3f050be75b69e;hp=486a4e0535c7bb2f18c927bae67c46e029b46f43;hpb=d98b0523cfaaedeecb263b15c121c0727b0d80b9;p=karo-tx-uboot.git

diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index 486a4e0535..a75c52f2c7 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 /*
@@ -41,7 +25,6 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC824X		1
 #define CONFIG_MPC8245		1
 #define CONFIG_CPC45		1
 
@@ -49,7 +32,6 @@
 
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 #define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
 
@@ -91,15 +73,11 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
 
 #if 1
 #define CONFIG_SYS_HUSH_PARSER		1	/* use "hush" command parser	*/
 #endif
-#ifdef	CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#endif
 
 /* Print Buffer Size
  */
@@ -151,13 +129,9 @@
  * Definitions for initial stack pointer and data area
  */
 
-/* Size in bytes reserved for initial data
- */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
 #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
-#define CONFIG_SYS_INIT_RAM_END	0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
 /*
  * NS16550 Configuration
@@ -204,7 +178,6 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ	33000000
-#define CONFIG_SYS_HZ			1000
 
 
 /* Bit-field values for MCCR1.
@@ -458,11 +431,11 @@
  *-----------------------------------------------------------------------
  */
 #define CONFIG_PCI			/* include pci support			*/
+#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
 #define CONFIG_SYS_EARLY_PCI_INIT
 #undef	CONFIG_PCI_PNP
 #undef	CONFIG_PCI_SCAN_SHOW
 
-#define CONFIG_NET_MULTI		/* Multi ethernet cards support		*/
 
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
@@ -489,6 +462,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/