X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2FMPC8315ERDB.h;h=5879a823b8515eab51327fb7afcbe38526e25826;hb=0e8d158664a913392cb01fb11a948d83f72e105e;hp=ff7101f249a2038b81bc050b3ad0dd2e669eedd4;hpb=c62776be8dca4097ca03d4f9415f08d4887b45d0;p=karo-tx-uboot.git

diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index ff7101f249..5879a823b8 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -188,7 +188,7 @@
  * FLASH on the Local Bus
  */
 #define CFG_FLASH_CFI		/* use the Common Flash Interface */
-#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
 #define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 
 #define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
@@ -203,7 +203,7 @@
 #define CFG_OR0_PRELIM		( (~(CFG_FLASH_SIZE - 1) << 20) \
 				| OR_UPM_XAM \
 				| OR_GPCM_CSNT \
-				| OR_GPCM_ACS_0b11 \
+				| OR_GPCM_ACS_DIV2 \
 				| OR_GPCM_XACS \
 				| OR_GPCM_SCY_15 \
 				| OR_GPCM_TRLX \
@@ -299,7 +299,7 @@
 #define CFG_PCI_MMIO_BASE	0x90000000
 #define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
 #define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
-#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_BASE		0x00000000
 #define CFG_PCI_IO_PHYS		0xE0300000
 #define CFG_PCI_IO_SIZE		0x100000 /* 1M */
 
@@ -321,6 +321,8 @@
 #define CONFIG_NET_MULTI	1
 #endif
 
+#define CONFIG_HAS_FSL_DR_USB
+
 /*
  * TSEC
  */
@@ -348,19 +350,42 @@
 /* Options are: eTSEC[0-1] */
 #define CONFIG_ETHPRIME		"eTSEC1"
 
+/*
+ * SATA
+ */
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CFG_SATA_MAX_DEVICE	2
+#define CONFIG_SATA1
+#define CFG_SATA1_OFFSET	0x18000
+#define CFG_SATA1		(CFG_IMMR + CFG_SATA1_OFFSET)
+#define CFG_SATA1_FLAGS		FLAGS_DMA
+#define CONFIG_SATA2
+#define CFG_SATA2_OFFSET	0x19000
+#define CFG_SATA2		(CFG_IMMR + CFG_SATA2_OFFSET)
+#define CFG_SATA2_FLAGS		FLAGS_DMA
+
+#ifdef CONFIG_FSL_SATA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
 /*
  * Environment
  */
 #ifndef CFG_RAMBOOT
-	#define CFG_ENV_IS_IN_FLASH	1
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-	#define CFG_ENV_SECT_SIZE	0x10000 /* 64K(one sector) for env */
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_ENV_IS_IN_FLASH	1
+	#define CONFIG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE	0x10000 /* 64K(one sector) for env */
+	#define CONFIG_ENV_SIZE		0x2000
 #else
 	#define CFG_NO_FLASH		1	/* Flash is not usable now */
-	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-	#define CFG_ENV_SIZE		0x2000
+	#define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
@@ -430,6 +455,7 @@
 /*
  * MMU Setup
  */
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
 
 /* DDR: cache cacheable */
 #define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -508,7 +534,7 @@
 
 #define CONFIG_BAUDRATE 115200
 
-#define CONFIG_LOADADDR 200000	/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 500000	/* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY 6	/* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS		/* the boot command will set bootargs */