X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2FRPXsuper.h;h=28884295e796b321b6f2ca80b389c17309c3bf72;hb=17998eff9021b7b579c0387e934d8c52603fe247;hp=f4f90f2043ee78c4c2b1c8b0316232b8ae9ae9e4;hpb=2ae1824196884ba2bafffb7c0d3e8297350591e9;p=karo-tx-uboot.git

diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index f4f90f2043..28884295e7 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -35,7 +35,7 @@
 #undef CONFIG_SYS_SBC_BOOT_LOW
 
 /* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/sbc8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE.
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
@@ -107,8 +107,8 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Half Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
 # define CONFIG_SYS_CPMFCR_RAMTYPE	0
 /*#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB) */
 # define CONFIG_SYS_FCC_PSMR		0
@@ -148,7 +148,6 @@
 #define CONFIG_SYS_LONGHELP
 
 /* Monitor Command Prompt       */
-#define CONFIG_SYS_PROMPT              "=> "
 
 
 /*
@@ -214,10 +213,6 @@
 #define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
 
 #define CONFIG_SYS_LOAD_ADDR     0x100000     /* default load address */
-#define CONFIG_SYS_HZ            1000         /* decrementer freq: 1 ms ticks */
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 
 /*
  * Low Level Configuration Settings
@@ -265,9 +260,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x4000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE      128     /* bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE        0x4000  /* Size of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -505,12 +499,4 @@
 			   ORxG_SCY_5_CLK              |\
 			   ORxG_TRLX)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02    /* Software reboot                   */
-
 #endif  /* __CONFIG_H */