X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2FTQM834x.h;h=d0c6a4dc5dae5906279175cc5a071bb2d02b9fe3;hb=9f530d59e63f6a4584e0caee54f92255c7ed59ab;hp=492bdccb5afeafd97a0d3a5abe79d3a8916bb8cb;hpb=be9b56df02168ca97562d6b9ec791136e4cd925a;p=karo-tx-uboot.git

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 492bdccb5a..d0c6a4dc5d 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -52,7 +52,8 @@
  * External Local Bus rate is
  *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
  */
-#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
+#define CONFIG_SYS_LCRR_DBYP	LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV	LCRR_CLKDIV_8
 
 /* board pre init: do not call, nothing to do */
 #undef CONFIG_BOARD_EARLY_INIT_F
@@ -100,10 +101,6 @@
  * defined as tqm834x_num_flash_banks.
  */
 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	2
-#ifndef __ASSEMBLY__
-extern int tqm834x_num_flash_banks;
-#endif
-#define CONFIG_SYS_MAX_FLASH_BANKS (tqm834x_num_flash_banks)
 
 #define CONFIG_SYS_MAX_FLASH_SECT		512	/* max sectors per device */
 
@@ -165,7 +162,6 @@ extern int tqm834x_num_flash_banks;
  * Serial Port
  */
 #define CONFIG_CONS_INDEX	1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
@@ -250,7 +246,7 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 
 /* PCI1 host bridge */
-#define CONFIG_SYS_PCI1_MEM_BASE       0x80000000
+#define CONFIG_SYS_PCI1_MEM_BASE       0x90000000
 #define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
 #define CONFIG_SYS_PCI1_MEM_SIZE       0x10000000      /* 256M */
 #define CONFIG_SYS_PCI1_MMIO_BASE      (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
@@ -331,6 +327,8 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
 
 #define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
+
 #define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/
 #ifdef	CONFIG_SYS_HUSH_PARSER
 #define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
@@ -356,10 +354,10 @@ extern int tqm834x_num_flash_banks;
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20)	/* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_HRCW_LOW (\
 	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
@@ -402,7 +400,8 @@ extern int tqm834x_num_flash_banks;
 
 /* i-cache and d-cache disabled */
 #define CONFIG_SYS_HID0_INIT	0x000000000
-#define CONFIG_SYS_HID0_FINAL	CONFIG_SYS_HID0_INIT
+#define CONFIG_SYS_HID0_FINAL	(CONFIG_SYS_HID0_INIT | \
+				 HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2	HID2_HBE
 
 #define CONFIG_HIGH_BATS	1	/* High BATs supported */