X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fgw8260.h;h=18d6c6578f908d781ab8784972c4cbf688f3212f;hb=b0dac5b1af6a66aeb02eb63e852415367b30b168;hp=9e7646703bf0a34b51f3f3bb3ab82cb972e16df4;hpb=d48455ad8cefd25d7b49f68fd16d0e9fd551732a;p=karo-tx-uboot.git

diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 9e7646703b..18d6c6578f 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -85,7 +85,7 @@
 #define CONFIG_SYS_SBC_BOOT_LOW 1
 
 /* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/sbc8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE.
  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  * this to be the SIMM.
  */
@@ -240,8 +240,8 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE	0
 # define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
@@ -253,8 +253,8 @@
  * - Select bus for bd/buffers (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
 # define CONFIG_SYS_CPMFCR_RAMTYPE	0
 # define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
 
@@ -331,7 +331,6 @@
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef  CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 #endif
 
 /* What is the address of IO controller */
@@ -387,9 +386,6 @@
 #define CONFIG_SYS_MEMTEST_END     ( CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 \
 			    - CONFIG_SYS_MEM_END_USAGE )
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE  { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -438,9 +434,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR    CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END     0x4000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE   128 /* bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE     0x4000  /* Size of used area in DPRAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET   CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -821,13 +816,4 @@
 			    ORxG_SCY_11_CLK            |\
 			    ORxG_EHTR)
 #endif /* CONFIG_SYS_IO_BASE */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM   0x02    /* Software reboot           */
-
 #endif  /* __CONFIG_H */