X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fmeesc.h;h=e5bb87302c7b82649d1c96b5bd146ec85833b972;hb=87395ee778cec7fde0be07f1229786eaefda7189;hp=ea402905ba067cc5c98858a4f29de4d2e7f2fc45;hpb=c829ff2e3d1bec9b2019480d82638149327db99e;p=karo-tx-uboot.git diff --git a/include/configs/meesc.h b/include/configs/meesc.h index ea402905ba..e5bb87302c 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -1,6 +1,6 @@ /* * (C) Copyright 2007-2008 - * Stelian Pop + * Stelian Pop * Lead Tech Design * * (C) Copyright 2009-2011 @@ -9,23 +9,7 @@ * * Configuation settings for the esd MEESC board. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __CONFIG_H @@ -56,7 +40,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq */ /* Misc CPU related */ #define CONFIG_SKIP_LOWLEVEL_INIT @@ -68,7 +51,6 @@ #define CONFIG_REVISION_TAG #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_MISC_INIT_R /* Call misc_init_r */ -#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */ #define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ #define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ @@ -89,7 +71,6 @@ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600} #define CONFIG_BOOTDELAY 3 #define CONFIG_ZERO_BOOTDELAY_CHECK @@ -105,12 +86,6 @@ /* * Command line configuration. */ -#include -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_IMLS - #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND @@ -143,7 +118,6 @@ #ifdef CONFIG_SYS_USE_DATAFLASH # define CONFIG_ATMEL_DATAFLASH_SPI # define CONFIG_HAS_DATAFLASH -# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ) # define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 # define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ # define AT91_SPI_CLK 15000000 @@ -162,9 +136,8 @@ # define CONFIG_SYS_NAND_DBW_8 # define CONFIG_SYS_NAND_MASK_ALE (1 << 21) # define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15 -# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22 -# define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +# define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) +# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) #endif /* Ethernet */ @@ -176,6 +149,7 @@ /* USB */ #define CONFIG_USB_ATMEL +#define CONFIG_USB_ATMEL_CLK_SEL_PLLB #define CONFIG_USB_OHCI_NEW #define CONFIG_DOS_PARTITION #define CONFIG_SYS_USB_OHCI_CPU_INIT @@ -209,7 +183,6 @@ #endif -#define CONFIG_SYS_PROMPT "=> " #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ @@ -223,10 +196,4 @@ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 128*1024, 0x1000) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -# error CONFIG_USE_IRQ not supported -#endif - #endif