X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fsocfpga_cyclone5.h;h=9e733e5c48750f6befbc79eca85abbf9f7e54809;hb=b86a63c42e39f4eb501dc923d51d2f7703aa90c7;hp=8d54bf892daa268a5da56335a8ac5c887ab637b2;hpb=04de09f89bbc647d5b72db3512d1af1475a13bbd;p=karo-tx-uboot.git

diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index 8d54bf892d..9e733e5c48 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -7,13 +7,9 @@
 #define __CONFIG_SOCFPGA_CYCLONE5_H__
 
 #include <asm/arch/socfpga_base_addrs.h>
-#include "../../board/altera/socfpga/pinmux_config.h"
-#include "../../board/altera/socfpga/iocsr_config.h"
-#include "../../board/altera/socfpga/pll_config.h"
 
 /* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
-#include <config_cmd_default.h>
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE
 #define CONFIG_HW_WATCHDOG
@@ -21,20 +17,19 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DFU
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
-#define CONFIG_CMD_FPGA
 #define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_GPIO
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MMC
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
-
-#define CONFIG_REGEX			/* Enable regular expression support */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_USB_MASS_STORAGE
 
 /* Memory configurations */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB on SoCDK */
@@ -42,23 +37,19 @@
 /* Booting Linux */
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTFILE		"zImage"
-#define CONFIG_BOOTARGS		"console=ttyS0" __stringify(CONFIG_BAUDRATE)
+#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 #define CONFIG_BOOTCOMMAND	"run ramboot"
 #else
 #define CONFIG_BOOTCOMMAND	"run mmcload; run mmcboot"
 #endif
-#define CONFIG_LOADADDR		0x8000
+#define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
 /* Ethernet on SoC (EMAC) */
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_EMAC_BASE		SOCFPGA_EMAC0_ADDRESS
-#define CONFIG_PHY_INTERFACE_MODE	PHY_INTERFACE_MODE_RGMII
-#define CONFIG_EPHY0_PHY_ADDR		0
 
 /* PHY */
-#define CONFIG_EPHY1_PHY_ADDR		4
 #define CONFIG_PHY_MICREL
 #define CONFIG_PHY_MICREL_KSZ9021
 #define CONFIG_KSZ9021_CLK_SKEW_ENV	"micrel-ksz9021-clk-skew"
@@ -68,6 +59,12 @@
 
 #endif
 
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2_REG_ADDR	SOCFPGA_USB1_ADDRESS
+#endif
+#define CONFIG_G_DNL_MANUFACTURER      "Altera"
+
 /* Extra Environment */
 #define CONFIG_HOSTNAME		socfpga_cyclone5