X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fconfigs%2Fvme8349.h;h=175311cad9204467f1689ec540dac03b9e33f162;hb=8d67c3685e3b4bea8524e2e25b1443b62a69352b;hp=d0690feb173dcaf32351deb3fcc1fbba103939f3;hpb=7529b4445bc4525765b003d3269bcf37fc33fac5;p=karo-tx-uboot.git diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index d0690feb17..175311cad9 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -2,29 +2,13 @@ * esd vme8349 U-Boot configuration file * Copyright (c) 2008, 2009 esd gmbh Hannover Germany * - * (C) Copyright 2006 + * (C) Copyright 2006-2010 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * reinhard.arlt@esd-electronics.de * Based on the MPC8349EMDS config. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -34,28 +18,38 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* + * Top level Makefile configuration choices + */ +#ifdef CONFIG_CADDY2 +#define VME_CADDY2 +#endif + /* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ #define CONFIG_MPC834x 1 /* MPC834x family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_VME8349 1 /* ESD VME8349 board specific */ +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + +#define CONFIG_MISC_INIT_R + #define CONFIG_PCI /* Don't enable PCI2 on vme834x - it doesn't exist physically. */ #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ -#define PCI_66M -#ifdef PCI_66M +#define CONFIG_PCI_66M +#ifdef CONFIG_PCI_66M #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ #else #define CONFIG_83XX_CLKIN 33000000 /* in Hz */ #endif #ifndef CONFIG_SYS_CLK_FREQ -#ifdef PCI_66M +#ifdef CONFIG_PCI_66M #define CONFIG_SYS_CLK_FREQ 66000000 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 #else @@ -75,7 +69,9 @@ */ #define CONFIG_DDR_ECC /* only for ECC DDR module */ #define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ -#undef CONFIG_SPD_EEPROM /* dont use SPD EEPROM for DDR setup*/ +#define CONFIG_SPD_EEPROM +#define SPD_EEPROM_ADDRESS 0x54 +#define CONFIG_SYS_READ_SPD vme8349_read_spd #define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */ /* @@ -93,57 +89,73 @@ #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is sys memory*/ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ - DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ + | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) #define CONFIG_DDR_2T_TIMING - -/* - * Manually set up DDR parameters - */ -#define CONFIG_SYS_DDR_SIZE 512 /* MB */ - -#if (CONFIG_SYS_DDR_SIZE == 512) -#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10 | \ - CSCONFIG_BANK_BIT_3) -#endif - -/* - * Manually set up DDR parameters - */ -#define CONFIG_SYS_DDR_TIMING_0 0x00220802 -#define CONFIG_SYS_DDR_TIMING_1 0x39377322 -#define CONFIG_SYS_DDR_TIMING_2 0x2f9848ca /* P9-45, tuning? */ -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuf,no DYN_PWR */ -#define CONFIG_SYS_DDR_MODE 0x07940242 -#define CONFIG_SYS_DDR_MODE2 0x00000000 -/* autocharge,no open page */ -#define CONFIG_SYS_DDR_INTERVAL 0x04060100 -#define CONFIG_SYS_DDR_SDRAM_CFG 0x63000000 -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x04061000 +#define CONFIG_SYS_DDRCDR (DDRCDR_DHC_EN \ + | DDRCDR_ODT \ + | DDRCDR_Q_DRN) + /* 0x80080001 */ /* * FLASH on the Local Bus */ #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#ifdef VME_CADDY2 +#define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ + BR_PS_16 | /* 16bit */ \ + BR_MS_GPCM | /* MSEL = GPCM */ \ + BR_V) /* valid */ + +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xffc06ff7 */ +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_4MB) +#else #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ -/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ - +#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - (2 << BR_PS_SHIFT) | /* 32bit */ \ - BR_V) /* valid */ - -#define CONFIG_SYS_OR0_PRELIM 0xF8006FF7 /* 128 MB flash size */ + BR_PS_16 | /* 16bit */ \ + BR_MS_GPCM | /* MSEL = GPCM */ \ + BR_V) /* valid */ + +#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ + | OR_GPCM_XAM \ + | OR_GPCM_CSNT \ + | OR_GPCM_ACS_DIV2 \ + | OR_GPCM_XACS \ + | OR_GPCM_SCY_15 \ + | OR_GPCM_TRLX_SET \ + | OR_GPCM_EHTR_SET \ + | OR_GPCM_EAD) + /* 0xf8006ff7 */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001A /* 128 MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) +#endif +/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ -#define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801) -#define CONFIG_SYS_OR1_PRELIM (0xffff8000 | 0x00000200) -#define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000 -#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x0000000e) +#define CONFIG_SYS_WINDOW1_BASE 0xf0000000 +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_WINDOW1_BASE \ + | BR_PS_32 \ + | BR_MS_GPCM \ + | BR_V) + /* 0xF0001801 */ +#define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB \ + | OR_GPCM_SETA) + /* 0xfffc0208 */ +#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_WINDOW1_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_256KB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ @@ -152,33 +164,31 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase TO (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO (ms) */ -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_RAMBOOT #else -#undef CONFIG_SYS_RAMBOOT +#undef CONFIG_SYS_RAMBOOT #endif #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xF7000000 /* Initial RAM addr */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* size */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* size */ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* size init data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Malloc size */ +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Malloc size */ /* * Local Bus LCRR and LBCR regs - * LCRR: DLL bypass, Clock divider is 4 + * LCRR: no DLL bypass, Clock divider is 4 * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 @@ -188,24 +198,21 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) #define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) #define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ /* Use the HUSH parser */ #define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT @@ -213,18 +220,16 @@ #define CONFIG_OF_STDOUT_VIA_ALIAS /* I2C */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_FSL_I2C -#define CONFIG_I2C_CMD_TREE -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {{0, 0x69}} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C1_OFFSET 0x3000 -#define CONFIG_SYS_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_OFFSET CONFIG_SYS_I2C1_OFFSET -/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SPD_BUS_NUM... */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } +/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */ #define CONFIG_SYS_I2C_8574_ADDR2 0x20 /* I2C1, PCF8574 */ @@ -268,10 +273,9 @@ #undef PCI_ONE_PCI1 #endif -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#define CONFIG_NET_MULTI +#ifndef VME_CADDY2 +#endif +#define CONFIG_PCI_PNP /* do pci plug-and-play */ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -282,19 +286,23 @@ #define PCI_IDSEL_NUMBER 0xFIXME #endif +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + #endif /* CONFIG_PCI */ /* * TSEC configuration */ +#ifdef VME_CADDY2 +#define CONFIG_E1000 +#else #define CONFIG_TSEC_ENET /* TSEC ethernet support */ +#endif #if defined(CONFIG_TSEC_ENET) -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI -#endif -#define CONFIG_GMII /* MII PHY management */ +#define CONFIG_GMII /* MII PHY management */ #define CONFIG_TSEC1 #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 @@ -377,7 +385,6 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ @@ -388,14 +395,13 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_MAXARGS 16 /* max num of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */ -#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ /* * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is + * have to be in the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Init Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Init Memory map for Linux*/ #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ @@ -439,7 +445,8 @@ #define CONFIG_SYS_SICRL SICRL_LDP_A #define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_MACHINE_CHECK +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ENABLE_INSTRUCTION_CACHE) #define CONFIG_SYS_HID2 HID2_HBE @@ -454,18 +461,19 @@ #define CONFIG_HIGH_BATS /* High BATs supported */ /* DDR @ 0x00000000 */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ BATU_VS | BATU_VP) /* PCI @ 0x80000000 */ #ifdef CONFIG_PCI -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | \ +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \ BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \ +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_RW | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \ BATU_VS | BATU_VP) @@ -477,11 +485,11 @@ #endif #ifdef CONFIG_MPC83XX_PCI2 -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | \ +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_RW | \ BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \ BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | \ +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_RW | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \ BATU_VS | BATU_VP) @@ -493,17 +501,17 @@ #endif /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | \ +#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_RW | \ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | \ BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) #if (CONFIG_SYS_DDR_SIZE == 512) #define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ - BATL_PP_10 | BATL_MEMCOHERENCE) + BATL_PP_RW | BATL_MEMCOHERENCE) #define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ BATU_BL_256M | BATU_VS | BATU_VP) #else @@ -528,17 +536,8 @@ #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* @@ -552,15 +551,15 @@ #endif #define CONFIG_HOSTNAME VME8349 -#define CONFIG_ROOTPATH /tftpboot/rootfs -#define CONFIG_BOOTFILE uImage +#define CONFIG_ROOTPATH "/tftpboot/rootfs" +#define CONFIG_BOOTFILE "uImage" #define CONFIG_LOADADDR 800000 /* def location for tftp and bootm */ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* boot command will set bootargs */ -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 9600 #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -586,23 +585,29 @@ "fdtfile=vme8349.dtb\0" \ "" -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ + "$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND "run flash_self" +#ifndef __ASSEMBLY__ +int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen, + unsigned char *buffer, int len); +#endif + #endif /* __CONFIG_H */