X-Git-Url: https://git.kernelconcepts.de/?a=blobdiff_plain;f=include%2Fspi_flash.h;h=3b2d555c77babb1f3b73dc96c464e9c40a509eda;hb=a4cd7b4ad403e2278e65d1714158fe6026c211b7;hp=de262ed12d01b72b1f0b1f0bbde97153e85d0bda;hpb=10ca45d005a96e810b5a225b08135fc24da62ee9;p=karo-tx-uboot.git diff --git a/include/spi_flash.h b/include/spi_flash.h index de262ed12d..3b2d555c77 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -1,100 +1,213 @@ /* - * Interface to SPI flash + * Common SPI flash Interface * * Copyright (C) 2008 Atmel Corporation + * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. + * version 2 as published by the Free Software Foundation. */ + #ifndef _SPI_FLASH_H_ #define _SPI_FLASH_H_ -#include +#include /* Because we dereference struct udevice here */ #include -#include -/* SST specific macros */ -#ifdef CONFIG_SPI_FLASH_SST -# define SST_WP 0x01 /* Supports AAI word program */ -# define CMD_SST_BP 0x02 /* Byte Program */ -# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ +#ifndef CONFIG_SF_DEFAULT_SPEED +# define CONFIG_SF_DEFAULT_SPEED 1000000 +#endif +#ifndef CONFIG_SF_DEFAULT_MODE +# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#endif +#ifndef CONFIG_SF_DEFAULT_CS +# define CONFIG_SF_DEFAULT_CS 0 #endif +#ifndef CONFIG_SF_DEFAULT_BUS +# define CONFIG_SF_DEFAULT_BUS 0 +#endif + +struct spi_slave; +/** + * struct spi_flash - SPI flash structure + * + * @spi: SPI slave + * @dev: SPI flash device + * @flags: Indication of spi flash flags + * @name: Name of SPI flash + * @dual_flash: Indicates dual flash memories - dual stacked, parallel + * @shift: Flash shift useful in dual parallel + * @size: Total flash size + * @page_size: Write (page) size + * @sector_size: Sector size + * @erase_size: Erase size + * @bank_read_cmd: Bank read cmd + * @bank_write_cmd: Bank write cmd + * @bank_curr: Current flash bank + * @poll_cmd: Poll cmd - for flash erase/program + * @erase_cmd: Erase cmd 4K, 32K, 64K + * @read_cmd: Read cmd - Array Fast, Extn read and quad read. + * @write_cmd: Write cmd - page and quad program. + * @dummy_byte: Dummy cycles for read operation. + * @memory_map: Address of read-only SPI flash access + * @read: Flash read ops: Read len bytes at offset into buf + * Supported cmds: Fast Array Read + * @write: Flash write ops: Write len bytes from buf into offset + * Supported cmds: Page Program + * @erase: Flash erase ops: Erase len bytes from offset + * Supported cmds: Sector erase 4K, 32K, 64K + * return 0 - Success, 1 - Failure + */ struct spi_flash { struct spi_slave *spi; +#ifdef CONFIG_DM_SPI_FLASH + struct udevice *dev; + u16 flags; +#endif + const char *name; + u8 dual_flash; + u8 shift; - const char *name; - - /* Total flash size */ - u32 size; - /* Write (page) size */ - u32 page_size; - /* Erase (sector) size */ - u32 sector_size; + u32 size; + u32 page_size; + u32 sector_size; + u32 erase_size; #ifdef CONFIG_SPI_FLASH_BAR - /* Bank read cmd */ - u8 bank_read_cmd; - /* Bank write cmd */ - u8 bank_write_cmd; - /* Current flash bank */ - u8 bank_curr; + u8 bank_read_cmd; + u8 bank_write_cmd; + u8 bank_curr; +#endif + u8 poll_cmd; + u8 erase_cmd; + u8 read_cmd; + u8 write_cmd; + u8 dummy_byte; + + void *memory_map; +#ifndef CONFIG_DM_SPI_FLASH + /* + * These are not strictly needed for driver model, but keep them here + * while the transition is in progress. + * + * Normally each driver would provide its own operations, but for + * SPI flash most chips use the same algorithms. One approach is + * to create a 'common' SPI flash device which knows how to talk + * to most devices, and then allow other drivers to be used instead + * if required, perhaps with a way of scanning through the list to + * find the driver that matches the device. + */ + int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf); + int (*write)(struct spi_flash *flash, u32 offset, size_t len, + const void *buf); + int (*erase)(struct spi_flash *flash, u32 offset, size_t len); #endif - /* Poll cmd - for flash erase/program */ - u8 poll_cmd; - - void *memory_map; /* Address of read-only SPI flash access */ - int (*read)(struct spi_flash *flash, u32 offset, - size_t len, void *buf); - int (*write)(struct spi_flash *flash, u32 offset, - size_t len, const void *buf); - int (*erase)(struct spi_flash *flash, u32 offset, - size_t len); }; +struct dm_spi_flash_ops { + int (*read)(struct udevice *dev, u32 offset, size_t len, void *buf); + int (*write)(struct udevice *dev, u32 offset, size_t len, + const void *buf); + int (*erase)(struct udevice *dev, u32 offset, size_t len); +}; + +/* Access the serial operations for a device */ +#define sf_get_ops(dev) ((struct dm_spi_flash_ops *)(dev)->driver->ops) + +#ifdef CONFIG_DM_SPI_FLASH /** - * spi_flash_do_alloc - Allocate a new spi flash structure + * spi_flash_read_dm() - Read data from SPI flash * - * The structure is allocated and cleared with default values for - * read, write and erase, which the caller can modify. The caller must set - * up size, page_size and sector_size. - * - * Use the helper macro spi_flash_alloc() to call this. - * - * @offset: Offset of struct spi_slave within slave structure - * @size: Size of slave structure - * @spi: SPI slave - * @name: Name of SPI flash device + * @dev: SPI flash device + * @offset: Offset into device in bytes to read from + * @len: Number of bytes to read + * @buf: Buffer to put the data that is read + * @return 0 if OK, -ve on error */ -void *spi_flash_do_alloc(int offset, int size, struct spi_slave *spi, - const char *name); +int spi_flash_read_dm(struct udevice *dev, u32 offset, size_t len, void *buf); /** - * spi_flash_alloc - Allocate a new SPI flash structure + * spi_flash_write_dm() - Write data to SPI flash * - * @_struct: Name of structure to allocate (e.g. struct ramtron_spi_fram). This - * structure must contain a member 'struct spi_flash *flash'. - * @spi: SPI slave - * @name: Name of SPI flash device + * @dev: SPI flash device + * @offset: Offset into device in bytes to write to + * @len: Number of bytes to write + * @buf: Buffer containing bytes to write + * @return 0 if OK, -ve on error */ -#define spi_flash_alloc(_struct, spi, name) \ - spi_flash_do_alloc(offsetof(_struct, flash), sizeof(_struct), \ - spi, name) +int spi_flash_write_dm(struct udevice *dev, u32 offset, size_t len, + const void *buf); /** - * spi_flash_alloc_base - Allocate a new SPI flash structure with no private data + * spi_flash_erase_dm() - Erase blocks of the SPI flash + * + * Note that @len must be a muiltiple of the flash sector size. * - * @spi: SPI slave - * @name: Name of SPI flash device + * @dev: SPI flash device + * @offset: Offset into device in bytes to start erasing + * @len: Number of bytes to erase + * @return 0 if OK, -ve on error */ -#define spi_flash_alloc_base(spi, name) \ - spi_flash_do_alloc(0, sizeof(struct spi_flash), spi, name) +int spi_flash_erase_dm(struct udevice *dev, u32 offset, size_t len); +int spi_flash_probe_bus_cs(unsigned int busnum, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode, + struct udevice **devp); + +/* Compatibility function - this is the old U-Boot API */ +struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode); + +/* Compatibility function - this is the old U-Boot API */ +void spi_flash_free(struct spi_flash *flash); + +int spi_flash_remove(struct udevice *flash); + +static inline int spi_flash_read(struct spi_flash *flash, u32 offset, + size_t len, void *buf) +{ + return spi_flash_read_dm(flash->dev, offset, len, buf); +} + +static inline int spi_flash_write(struct spi_flash *flash, u32 offset, + size_t len, const void *buf) +{ + return spi_flash_write_dm(flash->dev, offset, len, buf); +} + +static inline int spi_flash_erase(struct spi_flash *flash, u32 offset, + size_t len) +{ + return spi_flash_erase_dm(flash->dev, offset, len); +} + +struct sandbox_state; + +int sandbox_sf_bind_emul(struct sandbox_state *state, int busnum, int cs, + struct udevice *bus, int of_offset, const char *spec); + +void sandbox_sf_unbind_emul(struct sandbox_state *state, int busnum, int cs); + +#else struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int spi_mode); + +/** + * Set up a new SPI flash from an fdt node + * + * @param blob Device tree blob + * @param slave_node Pointer to this SPI slave node in the device tree + * @param spi_node Cached pointer to the SPI interface this node belongs + * to + * @return 0 if ok, -1 on error + */ +struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node, + int spi_node); + void spi_flash_free(struct spi_flash *flash); static inline int spi_flash_read(struct spi_flash *flash, u32 offset, @@ -114,7 +227,9 @@ static inline int spi_flash_erase(struct spi_flash *flash, u32 offset, { return flash->erase(flash, offset, len); } +#endif void spi_boot(void) __noreturn; +void spi_spl_load_image(uint32_t offs, unsigned int size, void *vdst); #endif /* _SPI_FLASH_H_ */