After initializing an IEEE 1394 host, broadcast a resume packet. This makes
remote nodes visible which suspended their ports while the host was down.
Such nodes had to be unplugged and replugged in order to be recognized.
Motorola DCT6200 cable reciever was affected, probably other devices too.
http://marc.theaimsgroup.com/?t=
113202715800001
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jody McIntyre <scjody@modernduck.com>
/* this nodes state */
unsigned in_bus_reset:1;
unsigned is_shutdown:1;
/* this nodes state */
unsigned in_bus_reset:1;
unsigned is_shutdown:1;
+ unsigned resume_packet_sent:1;
/* this nodes' duties on the bus */
unsigned is_root:1;
/* this nodes' duties on the bus */
unsigned is_root:1;
+static int nodemgr_send_resume_packet(struct hpsb_host *host)
+{
+ struct hpsb_packet *packet;
+ int ret = 1;
+
+ packet = hpsb_make_phypacket(host,
+ 0x003c0000 | NODEID_TO_NODE(host->node_id) << 24);
+ if (packet) {
+ packet->no_waiter = 1;
+ packet->generation = get_hpsb_generation(host);
+ ret = hpsb_send_packet(packet);
+ }
+ if (ret)
+ HPSB_WARN("fw-host%d: Failed to broadcast resume packet",
+ host->id);
+ return ret;
+}
+
/* Because we are a 1394a-2000 compliant IRM, we need to inform all the other
* nodes of the broadcast channel. (Really we're only setting the validity
* bit). Other IRM responsibilities go in here as well. */
/* Because we are a 1394a-2000 compliant IRM, we need to inform all the other
* nodes of the broadcast channel. (Really we're only setting the validity
* bit). Other IRM responsibilities go in here as well. */
+ /* Some devices suspend their ports while being connected to an inactive
+ * host adapter, i.e. if connected before the low-level driver is
+ * loaded. They become visible either when physically unplugged and
+ * replugged, or when receiving a resume packet. Send one once. */
+ if (!host->resume_packet_sent && !nodemgr_send_resume_packet(host))
+ host->resume_packet_sent = 1;
+