The Haleakala is nearly identical with the Kilauea eval board. The only
difference is that the 405EXr only supports one EMAC and one PCIe
interface. This patch adds support for the Haleakala board by using
the identical image for Kilauea and Haleakala. The distinction is done
by comparing the PVR.
Signed-off-by: Stefan Roese <sr@denx.de>
bamboo PPC440EP
bunbinga PPC405EP
ebony PPC440GP
bamboo PPC440EP
bunbinga PPC405EP
ebony PPC440GP
katmai PPC440SPe
kilauea PPC405EX
lwmon5 PPC440EPx
katmai PPC440SPe
kilauea PPC405EX
lwmon5 PPC440EPx
ERIC \
EXBITGEN \
G2000 \
ERIC \
EXBITGEN \
G2000 \
katmai_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
katmai_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
-kilauea_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx kilauea amcc
+# Kilauea & Haleakala images are identical (recognized via PVR)
+kilauea_config \
+haleakala_config: unconfig
+ @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
luan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
luan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
#include <ppc405.h>
#include <libfdt.h>
#include <asm/processor.h>
#include <ppc405.h>
#include <libfdt.h>
#include <asm/processor.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#if defined(CONFIG_PCI)
#include <pci.h>
+int board_emac_count(void)
+{
+ u32 pvr = get_pvr();
+
+ /*
+ * 405EXr only has one EMAC interface, 405EX has two
+ */
+ if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+ return 1;
+ else
+ return 2;
+}
+
+static int board_pcie_count(void)
+{
+ u32 pvr = get_pvr();
+
+ /*
+ * 405EXr only has one EMAC interface, 405EX has two
+ */
+ if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+ return 1;
+ else
+ return 2;
+}
+
int checkboard (void)
{
char *s = getenv("serial#");
int checkboard (void)
{
char *s = getenv("serial#");
- printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
+ if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+ printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
+ else
+ printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
if (s != NULL) {
puts(", serial# ");
if (s != NULL) {
puts(", serial# ");
char *env;
unsigned int delay;
char *env;
unsigned int delay;
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < board_pcie_count(); i++) {
if (is_end_point(i)) {
printf("PCIE%d: will be configured as endpoint\n", i);
if (is_end_point(i)) {
printf("PCIE%d: will be configured as endpoint\n", i);
/*
* Get count of EMAC devices (doesn't have to be the max. possible number
* supported by the cpu)
/*
* Get count of EMAC devices (doesn't have to be the max. possible number
* supported by the cpu)
+ *
+ * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the
+ * EMAC count is possible. As it is needed for the Kilauea/Haleakala
+ * 405EX/405EXr eval board, using the same binary.
+#if defined(CONFIG_BOARD_EMAC_COUNT)
+#define LAST_EMAC_NUM board_emac_count()
+#else /* CONFIG_BOARD_EMAC_COUNT */
#if defined(CONFIG_HAS_ETH3)
#define LAST_EMAC_NUM 4
#elif defined(CONFIG_HAS_ETH2)
#if defined(CONFIG_HAS_ETH3)
#define LAST_EMAC_NUM 4
#elif defined(CONFIG_HAS_ETH2)
#else
#define LAST_EMAC_NUM 1
#endif
#else
#define LAST_EMAC_NUM 1
#endif
+#endif /* CONFIG_BOARD_EMAC_COUNT */
/* normal boards start with EMAC0 */
#if !defined(CONFIG_EMAC_NR_START)
/* normal boards start with EMAC0 */
#if !defined(CONFIG_EMAC_NR_START)
extern int emac4xx_miiphy_write (char *devname, unsigned char addr,
unsigned char reg, unsigned short value);
extern int emac4xx_miiphy_write (char *devname, unsigned char addr,
unsigned char reg, unsigned short value);
+int board_emac_count(void);
+
/*-----------------------------------------------------------------------------+
| ppc_4xx_eth_halt
| Disable MAL channel, and EMACn
/*-----------------------------------------------------------------------------+
| ppc_4xx_eth_halt
| Disable MAL channel, and EMACn
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+#define CONFIG_BOARD_EMAC_COUNT
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the