+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c348578bf612d0c56d8d376d23cae16defbd86af
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 10:50:55 2007 -0500
+
+ Add Ethernet 1000BASE-X support for PPC4xx
+
+ This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
+ is defined, the PHY will advertise it's capabilities for autonegotiation
+ based on the capabilities shown in the PHY's status registers, including
+ 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
+ advertise hard-coded capabilities, as before.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Thu Dec 27 09:52:17 2007 -0500
+
+ Add driver for National Semiconductor LM73 temperature sensor
+
+ This driver is based on the driver for the LM75.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 12618278688ea9b3d76536960a5ad2e3790fac40
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:14:00 2007 -0500
+
+ Add driver for STMicroelectronics M41T60 RTC
+
+ This driver is based on the driver for the M41T11. In the intended
+ application, the RTC will be powered by a large capacitor, rather than a
+ battery. The driver therefore checks to see whether the RTC has lost
+ power. The chip's OUT bit is normally reset from its power-up state. If
+ the OUT bit is read as set, or if the date and time are not valid, then the
+ RTC is assumed to have lost power, and its date and time are reset to
+ 1900-01-01 00:00:00.
+
+ Support for adjusting the speed of the clock to improve accuracy is
+ provided through an environment variable.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit d3471173e14b7544bb60339eda8d3d3906694b0a
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:34:39 2007 -0500
+
+ Use out_be32() and friends to access memory-mapped registers in sequoia.c
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c68f59fe3ec16769f82b5fca7421983c336d3aac
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:34:20 2007 -0500
+
+ Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Dec 22 15:23:50 2007 -0500
+
+ Cosmetic changes to ECC POST for AMCC Denali core
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 2e583d6c81034f80a267b89fa55498ae063ccef1
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 26 20:20:19 2007 +0100
+
+ ppc4xx: Fix compilation problem in 405 cache POST test
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 22 12:20:09 2007 +0100
+
+ ppc4xx: Move virtual address of POST cache test to bigger address
+
+ On Sequoia & LWMON5 the virtual address of the POST cache test is now
+ moved to a bigger address. This enables usage of more memory on those
+ boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d91722102cf63f77a0148ed3f3d54a26d87575e9
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 22 12:18:26 2007 +0100
+
+ ppc4xx: Fix problem in 44x cache POST routine
+
+ As repoted by Larry Johnson, running "diag run cache" caused a crash
+ in U-Boot. This problem was introduced by a patch that removed the
+ TLB entry for the cache test after the test has completed. Since this
+ TLB was only setup once, a 2nd attempt to run this cache test
+ failed with a crash. Now this TLB entry is created every time the
+ routine is called.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b0265b576bb8fa9465f99e99c323768b562fadc2
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 21 07:51:29 2007 +0100
+
+ ppc4xx: Update Makalu fdt support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Dec 19 09:05:40 2007 +0100
+
+ ppc4xx: Add fdt support to AMCC Katmai eval board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 328a340392a5df9aaf00792be989df73e750859e
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 18 08:44:51 2007 +0100
+
+ ppc4xx: fdt: Cleanup setup of cpu node setup
+
+ Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
+ without using the absolute path to the cpu node. This makes it possible
+ to use this U-Boot version with both versions of cpu-node naming
+ "cpu@0" and the former "PowerPC,440EPx@0".
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Dec 17 17:26:21 2007 +0100
+
+ ppc4xx: Fix lwmon5 compilation problem
+
+ Now that the 440EPx ECC test is not board specific anymore
+ remove this Makefile.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
+Author: Anatolij Gustschin <agustschin@t-online.de>
+Date: Wed Dec 5 17:43:20 2007 +0100
+
+ Fix ppc4xx clear_bss() code
+
+ ppc4xx clear_bss() fails if BSS segment size is not
+ divisible by 4 without remainder. This patch provides
+ fix for this problem.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date: Fri Nov 30 18:35:11 2007 +0100
+
+ PPC4xx: Minimal changes to add vxWorks support
+
+ Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
+
+commit 052440b022ca8981d39b6f8c10d1aa6326f47480
+Author: Markus Klotzbücher <mk@denx.de>
+Date: Fri Nov 23 13:09:18 2007 +0100
+
+ ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
+
+ When using dhcp/bootp the "netmask" environment variable is not
+ set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
+ desireable, so the following patch adds this this option to the board
+ config.
+
+ Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Oct 27 12:48:15 2007 -0400
+
+ Fix/enhance ECC POST for 440EPx/GRx
+
+ This patch allows the ECC POST to be used for different boards with the
+ PPC440 Denali SDRAM controller. Modifications include skipping the test
+ if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
+ to prevent timing errors.
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
+Author: Larry Johnson <lrj@arlinx.com>
+Date: Sat Oct 27 12:48:05 2007 -0400
+
+ PPC4xx: Move/rename ECC POST for 440EPx/GRx
+
+ Signed-off-by: Larry Johnson <lrj@acm.org>
+
+commit c29d2d3680046d430022c55e50fcb27f5866517e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 14 11:20:33 2007 +0100
+
+ ppc4xx: use correct io accessors for 4xx ethernet POST
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit ba79fde58a48c0a6ff8e2a96caba951594142203
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Dec 14 11:19:56 2007 +0100
+
+ ppc4xx: fix flush + invalidate_dcache_range arguments
+
+ flush + invalidate_dcache_range() expect the start and stop+1 address.
+ So the stop address is the first address behind (!) the range.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Dec 14 08:41:29 2007 +0100
+
+ ppc4xx: fdt: use fdt_fixup_ethernet()
+
+ By using aliases in the dts file, the ethernet node fixup is
+ much easier with the recently added functions.
+
+ Please note that the dts file needs the aliases for this to work.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 136288847e3b04f2ff357a067ad45e10afa0a24c
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 13 14:52:53 2007 +0100
+
+ ppc4xx: Bring 4xx fdt support up-to-date
+
+ This patch update the 4xx fdt support. It enabled fdt booting
+ on the AMCC Kilauea and Sequoia for now. More can follow later
+ quite easily.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 27 07:50:54 2007 +0100
+
+ cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
+
+ The check for an sufficiently erased destination was missing in the
+ buffered write function of the cfi flash driver (when
+ CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
+ writing to such a region will fail with the currect error message.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Mon Nov 12 10:56:17 2007 +0100
+
+ Some configuration updates for the TQM5200 based TB5200 board:
+
+ - enable command line history
+ - increase malloc space (because of bigger flash sectors)
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit e318d9e9021a0af7508171f84ed09d0e79f0284e
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Thu Sep 27 11:10:08 2007 +0200
+
+ TQM8xx: use the CFI flash driver on all TQM8xx boards
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 11d9eec479b470eab9242ab937fca70a876d9376
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM885D: adjust for doubled flash sector size + some minor fixes
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Wed Sep 26 17:55:54 2007 +0200
+
+ TQM885D: Exchanged SDRAM timing by a more relaxed timing.
+
+ CAS-Latency=2, Write Recovery Time tWR=2
+ The max. supported bus frequency is 66 MHz. Therefore, changed
+ threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit b988b8cd443989be65161888eea0127ad03f846f
+Author: Martin Krause <martin.krause@tqs.de>
+Date: Wed Sep 26 17:55:56 2007 +0200
+
+ TQM885D: use calculated cpuclk instead of measuring it
+
+ On the TQM885D the measurement of cpuclk with the PIT reference
+ timer ist not necessary. Since all module variants use the same
+ external 10 MHz oscillator, the cpuclk only depends on the PLL
+ configuration - which is readable by software.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 492c7049869348d31168de8dad89651315e468e0
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Thu Sep 27 14:54:46 2007 +0200
+
+ TQM885D: fix SDRAM refresh
+
+ At 133 MHz the current SDRAM refresh rate is too fast
+ (measured 4 * 1.17 us).
+ CFG_MAMR_PTA changes from 39 to 128. This result
+ in a refresh rate of 4 * 7.8 us at the default clock
+ 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
+ This is a compromise until a new method is found to
+ adjust the refresh rate.
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit dabad4b9bc46908e301f73ce76b38b23626a96e9
+Author: Jens Gehrlein <jens.gehrlein@tqs.de>
+Date: Thu Sep 27 14:54:46 2007 +0200
+
+ TQM860M: Support for 10col SDRAMs, max. 128 MiB
+
+ Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 61fb15c516fef5631e305f1976d7b3a679725856
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 27 01:52:50 2007 +0100
+
+ Fix coding style issues; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 467bcee11fe26ad422f2de971aa70866079870f2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:18 2007 +0100
+
+ cfi_flash: Add manufacturer-specific fixups
+
+ Run fixups based on the JEDEC manufacturer ID independent of the
+ command set ID.
+
+ This changes current behaviour: Previously, geometry reversal for AMD
+ chips were done based on the command set ID, while they are now done
+ based on the JEDEC manufacturer and device ID.
+
+ Also add fixup for top-boot Atmel chips. A fixup is needed for
+ AT49BV6416(T) too, but since u-boot currently only reads the low byte
+ of the device ID, there's no way to tell it apart from AT49BV642D,
+ which should not have this fixup. Since AT49BV642D support is
+ necessary to get ATNGW100 board support into mainline, I've commented
+ out the fixup for now.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:17 2007 +0100
+
+ cfi_flash: Add cmdset-specific init functions
+
+ Move things like reading JEDEC IDs and fixing up geometry reversal
+ into separate functions. The geometry reversal fixup is now performed
+ by altering the qry structure directly, which makes the sector init
+ code slightly cleaner.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit e23741f4a6d8047520ef0d4971762749b3587d32
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 15:36:16 2007 +0100
+
+ cfi_flash: Read whole QRY structure in one go
+
+ Read out the whole CFI Standard Query structure after successful cfi
+ identification. This allows subsequent code to access this information
+ directly without having to go through flash_read_uchar() and friends.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Dec 17 11:02:44 2007 +0100
+
+ AVR32: Fix logic inversion in disable_interrupts()
+
+ disable_interrupts() should return nonzero if interrupts were
+ _enabled_ before, not disabled.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit acac475212cbedb17b321a363a1c878e2b47b37f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Dec 14 16:51:22 2007 +0100
+
+ AVR32: Enable interrupts at bootup
+
+ The timer code depends on the timer interrupt to keep track of the
+ upper 32 bits of the cycle counter. This obviously doesn't work when
+ interrupts are disabled the whole time.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 9570bcd87f4db255514f43b6701746c412f8fef0
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 15 10:03:45 2007 +0100
+
+ AVR32: Fix wrong pin setup for USART3
+
+ As reported by Gerhard Berghofer:
+
+ in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
+ instead of PB18 and PB19.
+
+ which is obviously correct. There's currently no code that uses
+ USART3, but custom boards may run into problems.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Nov 1 12:44:20 2007 +0100
+
+ README: Remove ATSTK1000 daughterboard list
+
+ As noted by Kim Phillips, these lists tend to become out of date.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit c81cbbad21cb0ae983e2e796211202234cdc8be2
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Tue Oct 30 14:56:36 2007 +0100
+
+ Add ATSTK100[234] to MAINTAINERS
+
+ Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
+ "mother". Also update the entry for ATSTK1000 to be not only about the
+ AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 64ff2357b1727213803591813dbc779c924bf772
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1004 board
+
+ ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 667568db157f374b85abd7e03596ddd1f0b25681
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:02:54 2007 +0100
+
+ AVR32: Add support for the ATSTK1003 board
+
+ ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
+ which is a derivative of AT32AP7000.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 5fee84a794a51ec830548cda485a770efb018b92
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:23:33 2007 +0100
+
+ AVR32: Make some AT32AP700x peripherals optional
+
+ Add a chip-features file providing definitions of the form
+
+ AT32AP700x_CHIP_HAS_<peripheral>
+
+ to indicate the availability of the given peripheral on the currently
+ selected chip.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 36f28f8a9605ee5dcfa330482cfc62171261af97
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Oct 29 13:09:56 2007 +0100
+
+ AVR32: Rename at32ap7000 -> at32ap700x
+
+ The SoC-specific code for all the AT32AP700x CPUs is practically
+ identical; the only difference is that some chips have less features
+ than others. By doing this rename, we can add support for the AP7000
+ derivatives simply by making some features conditional.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jun 29 18:22:34 2007 +0200
+
+ atmel_mci: Show SR when block read fails
+
+ Show controller status as well as card status when an error occurs
+ during block read.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 13 14:52:53 2007 +0100
+
+ ppc4xx: Bring 4xx fdt support up-to-date
+
+ This patch update the 4xx fdt support. It enabled fdt booting
+ on the AMCC Kilauea and Sequoia for now. More can follow later
+ quite easily.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 12d30aa79779c2aa7a998bbae4c075f822a53004
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:34 2007 +0100
+
+ cfi_flash: Use map_physmem() and unmap_physmem()
+
+ Use map_physmem() and unmap_physmem() to convert from physical to
+ virtual addresses. This gives the arch a chance to provide an uncached
+ mapping for flash accesses.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 4d7d6936eb29af7cca330937808312aa5f61454d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:33 2007 +0100
+
+ Introduce map_physmem() and unmap_physmem()
+
+ map_physmem() returns a virtual address which can be used to access a
+ given physical address without involving the cache. unmap_physmem()
+ should be called when the virtual address returned by map_physmem() is
+ no longer needed.
+
+ This patch adds a stub implementation which simply returns the
+ physical address cast to a uchar * for all architectures except AVR32,
+ which converts the physical address to an uncached virtual mapping.
+ unmap_physmem() is a no-op on all architectures, but if any
+ architecture needs to do such mappings through the TLB, this is the
+ hook where those TLB entries can be invalidated.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:32 2007 +0100
+
+ cfi_flash: Introduce read and write accessors
+
+ Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
+ them to access the flash memory. This makes it clearer when the flash
+ is actually being accessed; merely dereferencing a volatile pointer
+ looks just like any other kind of access.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 812711ce6b3a386125dcf0d6a59588e461abbb87
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:31 2007 +0100
+
+ Implement __raw_{read,write}[bwl] on all architectures
+
+ This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
+ m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
+ from Linux.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Sat Oct 6 18:55:36 2007 +0200
+
+ cfi_flash: Reorder functions and eliminate extra prototypes
+
+ Reorder the functions in cfi_flash.c so that each function only uses
+ functions that have been defined before it. This allows the static
+ prototype declarations near the top to be eliminated and might allow
+ gcc to do a better job inlining functions.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:29 2007 +0100
+
+ cfi_flash: Make some needlessly global functions static
+
+ Make functions not declared in any header file static.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 7e5b9b471518c5652febc68ba62b432193d6abf4
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Thu Dec 13 12:56:28 2007 +0100
+
+ cfi_flash: Break long lines
+
+ This patch tries to keep all lines in the cfi_flash driver below 80
+ columns. There are a few lines left which don't fit this requirement
+ because I couldn't find any trivial way to break them (i.e. it would
+ take some restructuring, which I intend to do in a later patch.)
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Tue Dec 11 13:59:57 2007 +0100
+
+ CFI: synchronize command offsets with Linux CFI driver
+
+ Fixes non-working CFI Flash on the Inka4x0 board.
+
+ Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:17:34 2007 -0600
+
+ Handle MPC85xx PCIe reset errata (PCI-Ex 38)
+
+ On the MPC85xx boards that have PCIe enable the PCIe errata fix.
+ (MPC8544DS, MPC8548CDS, MPC8568MDS).
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 12:04:30 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Enabled CONFIG_CMD_ELF
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d435793229ce29a42797c1edc39f5b34f987f91a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Fri Dec 7 04:59:26 2007 -0600
+
+ Handle Asynchronous DDR clock on 85xx
+
+ The MPC8572 introduces the concept of an asynchronous DDR clock with
+ regards to the platform clock.
+
+ Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
+ mode.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:34:28 2007 -0600
+
+ Update Freescale MPC85xx ADS/CDS/MDS board config
+
+ * Removed some misc environment setup
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:47:44 2007 -0600
+
+ Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:16:18 2007 -0600
+
+ Move the MPC8540 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 870ceac5b3a3486c109396e005af81ae762b5710
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:14:50 2007 -0600
+
+ Move the MPC8560 ADS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 10:13:47 2007 -0600
+
+ Move the MPC8568 MDS board under board/freescale.
+
+ Minor path corrections needed to ensure buildability.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a853d56c59b33415304531443633808736acfc6e
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:18:59 2007 -0600
+
+ Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
+
+ We already had defines for LAWAR_TRGT_IF_* that we should use
+ rather than creating new ones. Also, added some missing defines for
+ PCIE targets.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 04db400892da37b76a585e332a0c137954ad2015
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 02:10:09 2007 -0600
+
+ Stop using immap_t on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_*_ADDR as the base of the registers
+ instead of getting it via &immap.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2714223f8e04ab3e4133ff65872eef366d90bfea
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:23:09 2007 -0600
+
+ Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c480861bf000156e6a3e932c258db59ff2212dd3
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 01:06:19 2007 -0600
+
+ Update MPC8568 MDS to use libfdt
+
+ Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Nov 14 15:52:06 2007 -0500
+
+ Add PCI Express support on MPC8568MDS
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit b90d25497625b90ffa3f2911a0895ca237556ff5
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:11:44 2007 -0600
+
+ Update MPC85xx CDS to use libfdt
+
+ Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:54:27 2007 -0600
+
+ Update MPC8540 ADS to use libfdt
+
+ Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 5ce715802f6c50dc78b3405b92f184b1e3710519
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 22:40:31 2007 -0600
+
+ Update MPC8560 ADS to use libfdt
+
+ Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 28 00:36:33 2007 -0600
+
+ Stop using immap_t for cpm offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
+ instead of getting it via &immap->im_cpm.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 23:25:02 2007 -0600
+
+ Stop using immap_t for guts offset on 85xx
+
+ In the future the offsets to various blocks may not be in same location.
+ Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
+ instead of getting it via &immap->im_gur.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 50c03c8cf494d91cdec39670d95337c743e16ec9
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 22:42:34 2007 -0600
+
+ Update MPC8544 DS config
+
+ * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
+ * Removed some misc environment setup
+ * Moved to using fdtfile & fdtaddr as fdt env var names
+ * Enabled CONFIG_CMDLINE_EDITING
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit addce57e2e4c49e77ffb2020a84690713bb18b47
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:12:24 2007 -0600
+
+ Update MPC8544DS to use libfdt
+
+ Updated the MPC8544DS config to use libfdt and assume use of aliases for
+ ethernet, pci, and serial for the various fixups that are done.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Nov 29 00:15:30 2007 -0600
+
+ Add libfdt based ft_cpu_setup for mpc85xx
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 11 13:38:19 2007 +0100
+
+ ppc4xx: Correct GPIO offset in gpio_config()
+
+ Thanks to Gary Jennejohn for pointing this out.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8809a2713b1ceaf3da55d9d785470294f15de06a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 11 11:46:01 2007 +0100
+
+ rtc: Fix merging problem
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 8 14:47:34 2007 +0100
+
+ ppc4xx: 405EX: Correctly enable USB pins
+
+ This patch selects the USB data pins in the 405EX GPIO and MFC (multi
+ function control) registers. This is done for the AMCC Kilauea and
+ Makalu eval boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Dec 8 08:25:09 2007 +0100
+
+ CFI: Coding style cleanup
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
+Author: Michael Schwingen <michael@schwingen.org>
+Date: Fri Dec 7 23:35:02 2007 +0100
+
+ CFI: support JEDEC flash roms in CFI-flash framework
+
+ The following patch adds support for non-CFI flash ROMS, by hooking into the
+ CFI flash code and using most of its code, as recently discussed here in the
+ thread "Mixing CFI and non-CFI flashs".
+
+ Signed-off-by: Michael Schwingen <michael@schwingen.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit c01b17dd856fa120b2970f50d9598546a4927ec3
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Wed Nov 28 21:24:50 2007 -0500
+
+ Conditionally compile fdt_fixup_ethernet()
+
+ Fix compiler warnings: On boards that don't have ethernets defined,
+ don't compile fdt_fixup_ethernet().
+
+commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Nov 27 21:59:46 2007 -0600
+
+ Convert boards that set memory node to use fdt_fixup_memory()
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 17:06:15 2007 -0600
+
+ Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
+
+ We use a combination of the serialN alias and CONFIG_CONS_INDEX to
+ determine which serial alias we should set linux,stdout-path to.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 14:57:45 2007 -0600
+
+ Add common memory fixup function
+
+ Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 11:19:12 2007 -0600
+
+ Conditionally compile fdt_support.c
+
+ Modify common/Makefile to conditionally compile fdt_support.c based
+ on CONFIG_OF_LIBFDT.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit d88e7ba0980773479e1a64badb293116071b7ef0
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Mon Nov 26 10:41:40 2007 -0600
+
+ Fix build breakage due to libfdt import
+
+ The IDS8247 got lost in the update and need an API update
+ do to rename of functions in libfdt.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Fri Nov 23 19:43:20 2007 -0500
+
+ Add spaces around the = in the fdt print format.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Fri Dec 7 01:25:38 2007 +0900
+
+ sh: Moved driver of the SuperH dependence
+
+ The composition of the directory in the drivers/ changed.
+ I moved SuperH serial driver and marubun PCMCIA driver.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:19 2007 +0100
+
+ Release v1.3.1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Dec 6 10:21:03 2007 +0100
+
+ ADS5121 Board: fix compile problem.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a27044b14a9e93678a82d7b35f202b93e7687abc
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Dec 6 05:58:43 2007 +0100
+
+ ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
+
+ This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
+ setting the FIXD bit in the SDR0_MFR register. Here a description of the
+ symptoms:
+
+ Problem Description
+ ------------------------------
+ If a DMA is performed between memory and PCI with the DMA 1 Controller
+ using prefetch, and as a result uses a special purpose buffer selected by
+ the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
+ the first part of the transfer sequence is performed twice. The
+ PPC440SPe PCI Controller requests more data than was needed such that in
+ the case of enforce memory protection, a host CPU exception can occur.
+ No data is corrupted, because data transfer is stopped in the PCI
+ Controller. Prefetch enable is specified by setting DMA Configuration
+ Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
+
+ Behavior that may be observed in a running system
+ ---------------------------------------------------------------------------
+
+ 1. DMA performance is decreased because of the double access on the PCI bus
+ interface.
+ 2. If an illegal access to some address on the PCI bus is detected at the
+ system level, a machine check or similar system error may occur.
+
+ Workarounds Available
+ ----------------------------------
+
+ 1. Do not program prefetch. Note that a prefetch command cannot be programmed
+ without selecting a special purpose buffer.
+ 2. To avoid crossing a physical boundary of the PCI slave device, add 512
+ bytes of address to the PCI address range.
+
+ This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
+ from AMCC and slighly changed.
+
+ Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Dec 4 16:29:48 2007 +0100
+
+ ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Dec 3 00:15:28 2007 +0100
+
+ Prepare for 1.3.1-rc1
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e15e33433e7c05111968dc9b434a52fd42cbd221
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Nov 30 07:15:41 2007 +0100
+
+ ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
+
+ This manual PCIe reset triggering solves the problem seen with the
+ Intel EPRO/1000 card, which was not detected (link not established)
+ upon power-up reset.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 260eea5676ca46903a335686cc020b29c4ca46fe
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 01:21:54 2007 +0900
+
+ sh: Add SuperH boards maintainer to MAINTAINERS file
+
+ Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Thu Nov 29 00:13:04 2007 +0900
+
+ sh: Add ms7750se support in MAKEALL
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit c7144373427a178332bf9754131c8c34c52c200a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 27 09:44:53 2007 +0100
+
+ sh: Add sh3 and sh4 support in MAKEALL
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 130080874a3d28450098481a262c5f7c855e908d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:51:17 2007 +0900
+
+ sh: Add document for SuperH.
+
+ This document is a summary of information concerning SuperH of U-Boot.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:39:31 2007 +0900
+
+ sh: Add marubun's pcmcia driver
+
+ Marubun pcmcia is a chip for PCMCIA used with SuperH.
+ Of course, this can be used even by other architectures.
+ When use this driver, came to be able to use CompactFlash
+ and Ethernet.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit febd86b969b975289ed948f1ac0eb9722da41ced
+Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+Date: Sun Nov 25 02:32:13 2007 +0900
+
+ sh: Update SuperH SCIF driver
+
+ - Changed volatile unsigned to vu_.
+ - Changed Makefile for kconfig.
+
+ Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit 8be760903645af09871be50ad0a6f9ebb62b311d
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Nov 27 11:57:35 2007 +0100
+
+ ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
+
+ After an error in the AMCC 405EX users manual now correctly configure
+ IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
+ usage.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
+Author: Wolfgang Denk <wd@denx.de>
+Date: Mon Nov 26 19:18:21 2007 +0100
+
+ Cleanup coding style; update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 25 22:39:25 2007 +0100
+
+ MAKEALL: add missing 512x boards in ppc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a340c325e668ca7386c2276387681720be9c3757
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 25 18:45:47 2007 +0100
+
+ Makefile : fix tags ctags etags with new drivers organization
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 26 15:06:14 2007 +0100
+
+ ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
+
+ As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
+ operation.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ca1ce226287270bb01e25b8e3674c701f12edf19
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Nov 26 15:01:45 2007 +0100
+
+ ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Nov 25 18:45:47 2007 +0100
+
+ Makefile : fix tags ctags etags with new drivers organization
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 59829cc189378c142c13d2aa8d9a897d8bef3961
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 21:26:56 2007 +0100
+
+ drivers/mtd : move mtd drivers to drivers/mtd
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 318c0b90431f2648552e5ade78833f42652ce859
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 21:17:55 2007 +0100
+
+ drivers/misc : move misc drivers to drivers/misc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 33daf5b7858807cb4ce4158c2c56524671c14c08
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 21:13:59 2007 +0100
+
+ drivers/block : move block drivers to drivers/block
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 0c698dcaa70275eb8814f665b545547cee013892
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 20:59:50 2007 +0100
+
+ drivers/rtc : move rtc drivers to drivers/rtc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f868cc5a50757d94f36c312395481cb0f187d9e6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 20:14:44 2007 +0100
+
+ drivers/hwmon : move hardware monitor drviers to drivers/hwmon
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 19:46:45 2007 +0100
+
+ drivers/input : move input drivers to drivers/input
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e4558666293364fc3af1c1d9381ca933fa0f1275
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 19:40:11 2007 +0100
+
+ drivers/usb : move usb drivers to drivers/usb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Nov 24 19:33:38 2007 +0100
+
+ drivers/serial : move serial drivers to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed Nov 21 21:19:24 2007 +0100
+
+ drivers/net : move net drivers to drivers/net
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 352d259130b349fe9593b8dada641bd78a9659e5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:41:48 2007 +0100
+
+ drivers/video : move video drivers to drivers/video
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 73646217186aa17afc8e305c5f06f06dd335eaad
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:33:09 2007 +0100
+
+ drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Tue Nov 20 20:28:09 2007 +0100
+
+ drivers/pci : move pci drivers to drivers/pci
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9162352817579840d7802da6d85872b3ca003c97
+Author: Gerald Van Baren <vanbaren@cideas.com>
+Date: Thu Nov 22 17:23:23 2007 -0500
+
+ Fix fdt printing for updated libfdt
+
+ Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
+
+ Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
+
+commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 13:30:15 2007 -0600
+
+ Add additional fdt fixup helper functions
+
+ Added the following fdt fixup helpers:
+ * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
+ * do_fixup_by_compat{_u32} - Find matching nodes by compat
+
+ The _u32 variants work the same only the property they are setting
+ is know to be a 32-bit integer instead of a byte buffer.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 11:11:03 2007 -0600
+
+ Add fdt_fixup_ethernet helper to set mac addresses
+
+ Added a fixup helper that uses aliases to set mac addresses
+ in the device tree based on the bd_t
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit dbaf07ce620aab249e3502b20a986234a6af1d3a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 14:07:46 2007 -0600
+
+ Fix warnings from import of libfdt
+
+ cmd_fdt.c: In function fdt_print:
+ cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
+ cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
+ cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
+ cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 8d04f02f6224e6983f4812ea4da704950ec8539c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 24 11:04:22 2007 -0500
+
+ Update libfdt from device tree compiler (dtc)
+
+ Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
+ the device tree compiler (dtc) project.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit e93becf80d732b64aef81b23e8b6ece02c40533d
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Nov 3 19:46:28 2007 -0500
+
+ Move do_fixup* for libfdt into common code
+
+ Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
+ into common/fdt_support.c and renamed:
+
+ do_fixup() -> do_fixup_by_path()
+ do_fixup_u32() -> do_fixup_by_path_u32()
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f738b4a75998f42a7408defadc9baac7a31c92db
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Oct 25 16:15:07 2007 -0500
+
+ Make no options to fdt print default to '/'
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Oct 24 10:21:57 2007 -0500
+
+ Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
+
+ Removed:
+ fdt_node_is_compatible
+ fdt_find_node_by_type
+ fdt_find_compatible_node
+
+ To ease merge of newer libfdt as we aren't using them anywhere at this time.
+
+ Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
+ reason.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 98e2867cc85409b919f862e6c16026461ec955df
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Wed Nov 21 09:19:37 2007 -0700
+
+ [BUILD] Remove libraries when updating autoconf.mk
+
+ Fix library problems caused by conditional compilation. Using
+ autoconf.mk to decide which files to compile has caused a problem when
+ changing configuration from one board to another without clearing out
+ the library (*.a) files.
+
+ It used to be that the linker was always passed the same list of .o
+ files when building the .a files. However, that is not longer true
+ with conditional compilation. Now, a different board config will have
+ a different file list passed to the linker. The problem occurs when
+ a library has already been built and the board config is changed.
+
+ Since the linker will update instead of replace a preexisting library,
+ then if the file list changes to remove some object files the old
+ objects will still exist in the library.
+
+ The solution is to remove all old library files when autoconf.mk is
+ made.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Wed Nov 21 08:49:50 2007 -0600
+
+ [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
+
+ Modify libfdt/Makefile to conditionally compile the *.c files based
+ on the board config.