+config GPIO_SX150X
+ bool "Semtech SX150x I2C GPIO expander"
+ depends on I2C=y
+ select GPIOLIB_IRQCHIP
+ default n
+ help
+ Say yes here to provide support for Semtech SX150-series I2C
+ GPIO expanders. Compatible models include:
+
+ 8 bits: sx1508q
+ 16 bits: sx1509q
+
+comment "MFD GPIO expanders:"
+
+config GPIO_ADP5520
+ tristate "GPIO Support for ADP5520 PMIC"
+ depends on PMIC_ADP5520
+ help
+ This option enables support for on-chip GPIO found
+ on Analog Devices ADP5520 PMICs.
+
+config GPIO_ARIZONA
+ tristate "Wolfson Microelectronics Arizona class devices"
+ depends on MFD_ARIZONA
+ help
+ Support for GPIOs on Wolfson Arizona class devices.
+
+config GPIO_CRYSTAL_COVE
+ tristate "GPIO support for Crystal Cove PMIC"
+ depends on INTEL_SOC_PMIC
+ select GPIOLIB_IRQCHIP
+ help
+ Support for GPIO pins on Crystal Cove PMIC.
+
+ Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
+ inside.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-crystalcove.
+
+config GPIO_CS5535
+ tristate "AMD CS5535/CS5536 GPIO support"
+ depends on MFD_CS5535
+ help
+ The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
+ can be used for quite a number of things. The CS5535/6 is found on
+ AMD Geode and Lemote Yeeloong devices.
+
+ If unsure, say N.
+
+config GPIO_DA9052
+ tristate "Dialog DA9052 GPIO"
+ depends on PMIC_DA9052
+ help
+ Say yes here to enable the GPIO driver for the DA9052 chip.
+
+config GPIO_DA9055
+ tristate "Dialog Semiconductor DA9055 GPIO"
+ depends on MFD_DA9055
+ help
+ Say yes here to enable the GPIO driver for the DA9055 chip.
+
+ The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
+ be controller by this driver.
+
+ If driver is built as a module it will be called gpio-da9055.
+
+config GPIO_DLN2
+ tristate "Diolan DLN2 GPIO support"
+ depends on MFD_DLN2
+ select GPIOLIB_IRQCHIP
+
+ help
+ Select this option to enable GPIO driver for the Diolan DLN2
+ board.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-dln2.
+
+config GPIO_JANZ_TTL
+ tristate "Janz VMOD-TTL Digital IO Module"
+ depends on MFD_JANZ_CMODIO
+ help
+ This enables support for the Janz VMOD-TTL Digital IO module.
+ This driver provides support for driving the pins in output
+ mode only. Input mode is not supported.
+
+config GPIO_KEMPLD
+ tristate "Kontron ETX / COMexpress GPIO"
+ depends on MFD_KEMPLD
+ help
+ This enables support for the PLD GPIO interface on some Kontron ETX
+ and COMexpress (ETXexpress) modules.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-kempld.
+
+config GPIO_LP3943
+ tristate "TI/National Semiconductor LP3943 GPIO expander"
+ depends on MFD_LP3943
+ help
+ GPIO driver for LP3943 MFD.
+ LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
+ Open drain outputs are required for this usage.
+
+config GPIO_MSIC
+ bool "Intel MSIC mixed signal gpio support"
+ depends on MFD_INTEL_MSIC
+ help
+ Enable support for GPIO on intel MSIC controllers found in
+ intel MID devices
+
+config GPIO_PALMAS
+ bool "TI PALMAS series PMICs GPIO"
+ depends on MFD_PALMAS
+ help
+ Select this option to enable GPIO driver for the TI PALMAS
+ series chip family.
+