enable_msi - Enable Message Signaled Interrupt (MSI) (default = off)
power_save - Automatic power-saving timeout (in second, 0 =
disable)
- power_save_controller - Support runtime D3 of HD-audio controller
- (-1 = on for supported chip (default), false = off,
- true = force to on even for unsupported hardware)
+ power_save_controller - Reset HD-audio controller in power-saving mode
+ (default = on)
align_buffer_size - Force rounding of buffer/period sizes to multiples
of 128 bytes. This is more efficient in terms of memory
access but isn't required by the HDA spec and prevents
config ACPI_BGRT
bool "Boottime Graphics Resource Table support"
- depends on EFI
+ depends on EFI && X86
help
This driver adds support for exposing the ACPI Boottime Graphics
Resource Table, which allows the operating system to obtain
acpi_handle handle;
acpi_status status;
- handle = ACPI_HANDLE(&adapter->dev);
+ handle = ACPI_HANDLE(adapter->dev.parent);
if (!handle)
return;
static DEFINE_PER_CPU(struct cpuidle_device *, acpi_cpuidle_device);
-static struct acpi_processor_cx *acpi_cstate[CPUIDLE_STATE_MAX];
+static DEFINE_PER_CPU(struct acpi_processor_cx * [CPUIDLE_STATE_MAX],
+ acpi_cstate);
static int disabled_by_idle_boot_param(void)
{
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
*/
static int acpi_idle_play_dead(struct cpuidle_device *dev, int index)
{
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
ACPI_FLUSH_CPU_CACHE();
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
struct cpuidle_driver *drv, int index)
{
struct acpi_processor *pr;
- struct acpi_processor_cx *cx = acpi_cstate[index];
+ struct acpi_processor_cx *cx = per_cpu(acpi_cstate[index], dev->cpu);
pr = __this_cpu_read(processors);
!(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
continue;
#endif
- acpi_cstate[count] = cx;
+ per_cpu(acpi_cstate[count], dev->cpu) = cx;
count++;
if (count == CPUIDLE_STATE_MAX)
#include "power.h"
static DEFINE_MUTEX(dev_pm_qos_mtx);
+static DEFINE_MUTEX(dev_pm_qos_sysfs_mtx);
static BLOCKING_NOTIFIER_HEAD(dev_pm_notifiers);
struct pm_qos_constraints *c;
struct pm_qos_flags *f;
- mutex_lock(&dev_pm_qos_mtx);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
/*
* If the device's PM QoS resume latency limit or PM QoS flags have been
* exposed to user space, they have to be hidden at this point.
*/
+ pm_qos_sysfs_remove_latency(dev);
+ pm_qos_sysfs_remove_flags(dev);
+
+ mutex_lock(&dev_pm_qos_mtx);
+
__dev_pm_qos_hide_latency_limit(dev);
__dev_pm_qos_hide_flags(dev);
out:
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
}
/**
kfree(req);
}
+static void dev_pm_qos_drop_user_request(struct device *dev,
+ enum dev_pm_qos_req_type type)
+{
+ mutex_lock(&dev_pm_qos_mtx);
+ __dev_pm_qos_drop_user_request(dev, type);
+ mutex_unlock(&dev_pm_qos_mtx);
+}
+
/**
* dev_pm_qos_expose_latency_limit - Expose PM QoS latency limit to user space.
* @dev: Device whose PM QoS latency limit is to be exposed to user space.
return ret;
}
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
mutex_lock(&dev_pm_qos_mtx);
if (IS_ERR_OR_NULL(dev->power.qos))
if (ret < 0) {
__dev_pm_qos_remove_request(req);
kfree(req);
+ mutex_unlock(&dev_pm_qos_mtx);
goto out;
}
-
dev->power.qos->latency_req = req;
+
+ mutex_unlock(&dev_pm_qos_mtx);
+
ret = pm_qos_sysfs_add_latency(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
+ dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
out:
- mutex_unlock(&dev_pm_qos_mtx);
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
return ret;
}
EXPORT_SYMBOL_GPL(dev_pm_qos_expose_latency_limit);
static void __dev_pm_qos_hide_latency_limit(struct device *dev)
{
- if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req) {
- pm_qos_sysfs_remove_latency(dev);
+ if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->latency_req)
__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_LATENCY);
- }
}
/**
*/
void dev_pm_qos_hide_latency_limit(struct device *dev)
{
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+ pm_qos_sysfs_remove_latency(dev);
+
mutex_lock(&dev_pm_qos_mtx);
__dev_pm_qos_hide_latency_limit(dev);
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_latency_limit);
}
pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
mutex_lock(&dev_pm_qos_mtx);
if (IS_ERR_OR_NULL(dev->power.qos))
if (ret < 0) {
__dev_pm_qos_remove_request(req);
kfree(req);
+ mutex_unlock(&dev_pm_qos_mtx);
goto out;
}
-
dev->power.qos->flags_req = req;
+
+ mutex_unlock(&dev_pm_qos_mtx);
+
ret = pm_qos_sysfs_add_flags(dev);
if (ret)
- __dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
+ dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
out:
- mutex_unlock(&dev_pm_qos_mtx);
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
pm_runtime_put(dev);
return ret;
}
static void __dev_pm_qos_hide_flags(struct device *dev)
{
- if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req) {
- pm_qos_sysfs_remove_flags(dev);
+ if (!IS_ERR_OR_NULL(dev->power.qos) && dev->power.qos->flags_req)
__dev_pm_qos_drop_user_request(dev, DEV_PM_QOS_FLAGS);
- }
}
/**
void dev_pm_qos_hide_flags(struct device *dev)
{
pm_runtime_get_sync(dev);
+ mutex_lock(&dev_pm_qos_sysfs_mtx);
+
+ pm_qos_sysfs_remove_flags(dev);
+
mutex_lock(&dev_pm_qos_mtx);
__dev_pm_qos_hide_flags(dev);
mutex_unlock(&dev_pm_qos_mtx);
+
+ mutex_unlock(&dev_pm_qos_sysfs_mtx);
pm_runtime_put(dev);
}
EXPORT_SYMBOL_GPL(dev_pm_qos_hide_flags);
static int cpu0_cpufreq_probe(struct platform_device *pdev)
{
- struct device_node *np;
+ struct device_node *np, *parent;
int ret;
- for_each_child_of_node(of_find_node_by_path("/cpus"), np) {
+ parent = of_find_node_by_path("/cpus");
+ if (!parent) {
+ pr_err("failed to find OF /cpus\n");
+ return -ENOENT;
+ }
+
+ for_each_child_of_node(parent, np) {
if (of_get_property(np, "operating-points", NULL))
break;
}
* published by the Free Software Foundation.
*/
-#ifndef _CPUFREQ_GOVERNER_H
-#define _CPUFREQ_GOVERNER_H
+#ifndef _CPUFREQ_GOVERNOR_H
+#define _CPUFREQ_GOVERNOR_H
#include <linux/cpufreq.h>
#include <linux/kobject.h>
unsigned int sampling_rate);
int cpufreq_governor_dbs(struct dbs_data *dbs_data,
struct cpufreq_policy *policy, unsigned int event);
-#endif /* _CPUFREQ_GOVERNER_H */
+#endif /* _CPUFREQ_GOVERNOR_H */
* If it can't be trusted, assume that the pin can be used as a GPIO.
*/
if (ichx_priv.desc->use_sel_ignore[nr / 32] & (1 << (nr & 0x1f)))
- return 1;
+ return 0;
return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;
}
.xlate = irq_domain_xlate_twocell,
};
-static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio)
+static int stmpe_gpio_irq_init(struct stmpe_gpio *stmpe_gpio,
+ struct device_node *np)
{
- int base = stmpe_gpio->irq_base;
+ int base = 0;
- stmpe_gpio->domain = irq_domain_add_simple(NULL,
+ if (!np)
+ base = stmpe_gpio->irq_base;
+
+ stmpe_gpio->domain = irq_domain_add_simple(np,
stmpe_gpio->chip.ngpio, base,
&stmpe_gpio_irq_simple_ops, stmpe_gpio);
if (!stmpe_gpio->domain) {
stmpe_gpio->chip = template_chip;
stmpe_gpio->chip.ngpio = stmpe->num_gpios;
stmpe_gpio->chip.dev = &pdev->dev;
+#ifdef CONFIG_OF
+ stmpe_gpio->chip.of_node = np;
+#endif
stmpe_gpio->chip.base = pdata ? pdata->gpio_base : -1;
if (pdata)
goto out_free;
if (irq >= 0) {
- ret = stmpe_gpio_irq_init(stmpe_gpio);
+ ret = stmpe_gpio_irq_init(stmpe_gpio, np);
if (ret)
goto out_disable;
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
- { HID_USB_DEVICE(USB_VENDOR_ID_MASTERKIT, USB_DEVICE_ID_MASTERKIT_MA901RADIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
hdev->product <= USB_DEVICE_ID_VELLEMAN_K8061_LAST))
return true;
break;
+ case USB_VENDOR_ID_ATMEL_V_USB:
+ /* Masterkit MA901 usb radio based on Atmel tiny85 chip and
+ * it has the same USB ID as many Atmel V-USB devices. This
+ * usb radio is handled by radio-ma901.c driver so we want
+ * ignore the hid. Check the name, bus, product and ignore
+ * if we have MA901 usb radio.
+ */
+ if (hdev->product == USB_DEVICE_ID_ATMEL_V_USB &&
+ hdev->bus == BUS_USB &&
+ strncmp(hdev->name, "www.masterkit.ru MA901", 22) == 0)
+ return true;
+ break;
}
if (hdev->type == HID_TYPE_USBMOUSE &&
#define USB_VENDOR_ID_ATMEL 0x03eb
#define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c
#define USB_DEVICE_ID_ATMEL_MXT_DIGITIZER 0x2118
+#define USB_VENDOR_ID_ATMEL_V_USB 0x16c0
+#define USB_DEVICE_ID_ATMEL_V_USB 0x05df
#define USB_VENDOR_ID_AUREAL 0x0755
#define USB_DEVICE_ID_AUREAL_W01RN 0x2626
#define USB_VENDOR_ID_MADCATZ 0x0738
#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
-#define USB_VENDOR_ID_MASTERKIT 0x16c0
-#define USB_DEVICE_ID_MASTERKIT_MA901RADIO 0x05df
-
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
return 0;
}
+static void magicmouse_input_configured(struct hid_device *hdev,
+ struct hid_input *hi)
+
+{
+ struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+
+ int ret = magicmouse_setup_input(msc->input, hdev);
+ if (ret) {
+ hid_err(hdev, "magicmouse setup input failed (%d)\n", ret);
+ /* clean msc->input to notify probe() of the failure */
+ msc->input = NULL;
+ }
+}
+
+
static int magicmouse_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
goto err_free;
}
- /* We do this after hid-input is done parsing reports so that
- * hid-input uses the most natural button and axis IDs.
- */
- if (msc->input) {
- ret = magicmouse_setup_input(msc->input, hdev);
- if (ret) {
- hid_err(hdev, "magicmouse setup input failed (%d)\n", ret);
- goto err_stop_hw;
- }
+ if (!msc->input) {
+ hid_err(hdev, "magicmouse input not registered\n");
+ ret = -ENOMEM;
+ goto err_stop_hw;
}
if (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE)
.remove = magicmouse_remove,
.raw_event = magicmouse_raw_event,
.input_mapping = magicmouse_input_mapping,
+ .input_configured = magicmouse_input_configured,
};
module_hid_driver(magicmouse_driver);
adap->algo = &i2c_dw_algo;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
- ACPI_HANDLE_SET(&adap->dev, ACPI_HANDLE(&pdev->dev));
r = i2c_add_numbered_adapter(adap);
if (r) {
#include "qib.h"
#include "qib_7220.h"
-#define SD7220_FW_NAME "intel/sd7220.fw"
+#define SD7220_FW_NAME "qlogic/sd7220.fw"
MODULE_FIRMWARE(SD7220_FW_NAME);
/*
static int usb_ma901radio_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+ struct usb_device *dev = interface_to_usbdev(intf);
struct ma901radio_device *radio;
int retval = 0;
+ /* Masterkit MA901 usb radio has the same USB ID as many others
+ * Atmel V-USB devices. Let's make additional checks to be sure
+ * that this is our device.
+ */
+
+ if (dev->product && dev->manufacturer &&
+ (strncmp(dev->product, "MA901", 5) != 0
+ || strncmp(dev->manufacturer, "www.masterkit.ru", 16) != 0))
+ return -ENODEV;
+
radio = kzalloc(sizeof(struct ma901radio_device), GFP_KERNEL);
if (!radio) {
dev_err(&intf->dev, "kzalloc for ma901radio_device failed\n");
static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
static void __iomem *at91_rtc_regs;
static int irq;
-static u32 at91_rtc_imr;
/*
* Decode time/date into rtc_time structure
cr = at91_rtc_read(AT91_RTC_CR);
at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
- at91_rtc_imr |= AT91_RTC_ACKUPD;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD);
wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD);
- at91_rtc_imr &= ~AT91_RTC_ACKUPD;
at91_rtc_write(AT91_RTC_TIMR,
bin2bcd(tm->tm_sec) << 0
tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
tm->tm_year = at91_alarm_year - 1900;
- alrm->enabled = (at91_rtc_imr & AT91_RTC_ALARM)
+ alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM)
? 1 : 0;
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
tm.tm_sec = alrm->time.tm_sec;
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
- at91_rtc_imr &= ~AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_TIMALR,
bin2bcd(tm.tm_sec) << 0
| bin2bcd(tm.tm_min) << 8
if (alrm->enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_rtc_imr |= AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
}
if (enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_rtc_imr |= AT91_RTC_ALARM;
at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
- } else {
+ } else
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
- at91_rtc_imr &= ~AT91_RTC_ALARM;
- }
return 0;
}
*/
static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
{
+ unsigned long imr = at91_rtc_read(AT91_RTC_IMR);
+
seq_printf(seq, "update_IRQ\t: %s\n",
- (at91_rtc_imr & AT91_RTC_ACKUPD) ? "yes" : "no");
+ (imr & AT91_RTC_ACKUPD) ? "yes" : "no");
seq_printf(seq, "periodic_IRQ\t: %s\n",
- (at91_rtc_imr & AT91_RTC_SECEV) ? "yes" : "no");
+ (imr & AT91_RTC_SECEV) ? "yes" : "no");
return 0;
}
unsigned int rtsr;
unsigned long events = 0;
- rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_imr;
+ rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR);
if (rtsr) { /* this interrupt is shared! Is it ours? */
if (rtsr & AT91_RTC_ALARM)
events |= (RTC_AF | RTC_IRQF);
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
- at91_rtc_imr = 0;
ret = request_irq(irq, at91_rtc_interrupt,
IRQF_SHARED,
at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
- at91_rtc_imr = 0;
free_irq(irq, pdev);
rtc_device_unregister(rtc);
/* AT91RM9200 RTC Power management control */
-static u32 at91_rtc_bkpimr;
-
+static u32 at91_rtc_imr;
static int at91_rtc_suspend(struct device *dev)
{
/* this IRQ is shared with DBGU and other hardware which isn't
* necessarily doing PM like we are...
*/
- at91_rtc_bkpimr = at91_rtc_imr & (AT91_RTC_ALARM|AT91_RTC_SECEV);
- if (at91_rtc_bkpimr) {
- if (device_may_wakeup(dev)) {
+ at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR)
+ & (AT91_RTC_ALARM|AT91_RTC_SECEV);
+ if (at91_rtc_imr) {
+ if (device_may_wakeup(dev))
enable_irq_wake(irq);
- } else {
- at91_rtc_write(AT91_RTC_IDR, at91_rtc_bkpimr);
- at91_rtc_imr &= ~at91_rtc_bkpimr;
- }
-}
+ else
+ at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr);
+ }
return 0;
}
static int at91_rtc_resume(struct device *dev)
{
- if (at91_rtc_bkpimr) {
- if (device_may_wakeup(dev)) {
+ if (at91_rtc_imr) {
+ if (device_may_wakeup(dev))
disable_irq_wake(irq);
- } else {
- at91_rtc_imr |= at91_rtc_bkpimr;
- at91_rtc_write(AT91_RTC_IER, at91_rtc_bkpimr);
- }
+ else
+ at91_rtc_write(AT91_RTC_IER, at91_rtc_imr);
}
return 0;
}
#define AT91_RTC_SCCR 0x1c /* Status Clear Command Register */
#define AT91_RTC_IER 0x20 /* Interrupt Enable Register */
#define AT91_RTC_IDR 0x24 /* Interrupt Disable Register */
+#define AT91_RTC_IMR 0x28 /* Interrupt Mask Register */
#define AT91_RTC_VER 0x2c /* Valid Entry Register */
#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
static int bcm63xx_spi_setup(struct spi_device *spi)
{
struct bcm63xx_spi *bs;
- int ret;
bs = spi_master_get_devdata(spi->master);
default:
dev_err(dev, "unsupported MSG_CTL width: %d\n",
bs->msg_ctl_width);
- goto out_clk_disable;
+ goto out_err;
}
/* Initialize hardware */
for (i = count; i > 0; i--) {
data = tx_buf ? *tx_buf++ : 0;
- if (len == EOFBYTE)
+ if (len == EOFBYTE && t->cs_change)
setbits32(&fifo->txcmd, MPC512x_PSC_FIFO_EOF);
out_8(&fifo->txdata_8, data);
len--;
master->dev.parent = &pdev->dev;
master->dev.of_node = pdev->dev.of_node;
- ACPI_HANDLE_SET(&master->dev, ACPI_HANDLE(&pdev->dev));
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
{
struct s3c64xx_spi_driver_data *sdd = data;
struct spi_master *spi = sdd->master;
- unsigned int val;
+ unsigned int val, clr = 0;
- val = readl(sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ val = readl(sdd->regs + S3C64XX_SPI_STATUS);
- val &= S3C64XX_SPI_PND_RX_OVERRUN_CLR |
- S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
- S3C64XX_SPI_PND_TX_OVERRUN_CLR |
- S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
-
- writel(val, sdd->regs + S3C64XX_SPI_PENDING_CLR);
-
- if (val & S3C64XX_SPI_PND_RX_OVERRUN_CLR)
+ if (val & S3C64XX_SPI_ST_RX_OVERRUN_ERR) {
+ clr = S3C64XX_SPI_PND_RX_OVERRUN_CLR;
dev_err(&spi->dev, "RX overrun\n");
- if (val & S3C64XX_SPI_PND_RX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_RX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_RX_UNDERRUN_CLR;
dev_err(&spi->dev, "RX underrun\n");
- if (val & S3C64XX_SPI_PND_TX_OVERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_OVERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_OVERRUN_CLR;
dev_err(&spi->dev, "TX overrun\n");
- if (val & S3C64XX_SPI_PND_TX_UNDERRUN_CLR)
+ }
+ if (val & S3C64XX_SPI_ST_TX_UNDERRUN_ERR) {
+ clr |= S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
dev_err(&spi->dev, "TX underrun\n");
+ }
+
+ /* Clear the pending irq by setting and then clearing it */
+ writel(clr, sdd->regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, sdd->regs + S3C64XX_SPI_PENDING_CLR);
return IRQ_HANDLED;
}
writel(0, regs + S3C64XX_SPI_MODE_CFG);
writel(0, regs + S3C64XX_SPI_PACKET_CNT);
- /* Clear any irq pending bits */
- writel(readl(regs + S3C64XX_SPI_PENDING_CLR),
- regs + S3C64XX_SPI_PENDING_CLR);
+ /* Clear any irq pending bits, should set and clear the bits */
+ val = S3C64XX_SPI_PND_RX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_RX_UNDERRUN_CLR |
+ S3C64XX_SPI_PND_TX_OVERRUN_CLR |
+ S3C64XX_SPI_PND_TX_UNDERRUN_CLR;
+ writel(val, regs + S3C64XX_SPI_PENDING_CLR);
+ writel(0, regs + S3C64XX_SPI_PENDING_CLR);
writel(0, regs + S3C64XX_SPI_SWAP_CFG);
return 0;
}
-static int tegra_slink_prepare_transfer(struct spi_master *master)
-{
- struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-
- return pm_runtime_get_sync(tspi->dev);
-}
-
-static int tegra_slink_unprepare_transfer(struct spi_master *master)
-{
- struct tegra_slink_data *tspi = spi_master_get_devdata(master);
-
- pm_runtime_put(tspi->dev);
- return 0;
-}
-
static int tegra_slink_transfer_one_message(struct spi_master *master,
struct spi_message *msg)
{
msg->status = 0;
msg->actual_length = 0;
+ ret = pm_runtime_get_sync(tspi->dev);
+ if (ret < 0) {
+ dev_err(tspi->dev, "runtime get failed: %d\n", ret);
+ goto done;
+ }
+
single_xfer = list_is_singular(&msg->transfers);
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
INIT_COMPLETION(tspi->xfer_completion);
exit:
tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
+ pm_runtime_put(tspi->dev);
+done:
msg->status = ret;
spi_finalize_current_message(master);
return ret;
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->setup = tegra_slink_setup;
- master->prepare_transfer_hardware = tegra_slink_prepare_transfer;
master->transfer_one_message = tegra_slink_transfer_one_message;
- master->unprepare_transfer_hardware = tegra_slink_unprepare_transfer;
master->num_chipselect = MAX_CHIP_SELECT;
master->bus_num = -1;
/* Lock queue and check for queue work */
spin_lock_irqsave(&master->queue_lock, flags);
if (list_empty(&master->queue) || !master->running) {
- if (master->busy && master->unprepare_transfer_hardware) {
- ret = master->unprepare_transfer_hardware(master);
- if (ret) {
- spin_unlock_irqrestore(&master->queue_lock, flags);
- dev_err(&master->dev,
- "failed to unprepare transfer hardware\n");
- return;
- }
+ if (!master->busy) {
+ spin_unlock_irqrestore(&master->queue_lock, flags);
+ return;
}
master->busy = false;
spin_unlock_irqrestore(&master->queue_lock, flags);
+ if (master->unprepare_transfer_hardware &&
+ master->unprepare_transfer_hardware(master))
+ dev_err(&master->dev,
+ "failed to unprepare transfer hardware\n");
return;
}
acpi_status status;
acpi_handle handle;
- handle = ACPI_HANDLE(&master->dev);
+ handle = ACPI_HANDLE(master->dev.parent);
if (!handle)
return;
{
struct usb_port *port_dev = to_usb_port(dev);
- dev_pm_qos_hide_flags(dev);
kfree(port_dev);
}
fbmode->vmode = 0;
if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
- if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+ if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH)
fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
fbmode->vmode |= FB_VMODE_INTERLACED;
err = -ENOMEM;
if (err) {
- platform_device_put(uvesafb_device);
+ if (uvesafb_device)
+ platform_device_put(uvesafb_device);
platform_driver_unregister(&uvesafb_driver);
cn_del_callback(&uvesafb_cn_id);
return err;
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
qlogic/12160.bin
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
-fw-shipped-$(CONFIG_INFINIBAND_QIB) += intel/sd7220.fw
+fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
ess/maestro3_assp_minisrc.fw
c->remounting_rw = 1;
c->ro_mount = 0;
+ if (c->space_fixup) {
+ err = ubifs_fixup_free_space(c);
+ if (err)
+ return err;
+ }
+
err = check_free_space(c);
if (err)
goto out;
err = dbg_check_space_info(c);
}
- if (c->space_fixup) {
- err = ubifs_fixup_free_space(c);
- if (err)
- goto out;
- }
-
mutex_unlock(&c->umount_mutex);
return err;
#endif
#else /* !CONFIG_PM_DEVFREQ */
-static struct devfreq *devfreq_add_device(struct device *dev,
+static inline struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
const char *governor_name,
void *data)
return NULL;
}
-static int devfreq_remove_device(struct devfreq *devfreq)
+static inline int devfreq_remove_device(struct devfreq *devfreq)
{
return 0;
}
-static int devfreq_suspend_device(struct devfreq *devfreq)
+static inline int devfreq_suspend_device(struct devfreq *devfreq)
{
return 0;
}
-static int devfreq_resume_device(struct devfreq *devfreq)
+static inline int devfreq_resume_device(struct devfreq *devfreq)
{
return 0;
}
-static struct opp *devfreq_recommended_opp(struct device *dev,
+static inline struct opp *devfreq_recommended_opp(struct device *dev,
unsigned long *freq, u32 flags)
{
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
-static int devfreq_register_opp_notifier(struct device *dev,
+static inline int devfreq_register_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
}
-static int devfreq_unregister_opp_notifier(struct device *dev,
+static inline int devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq)
{
return -EINVAL;
/* status */
u32 connect:1; /* source and sink widgets are connected */
u32 walked:1; /* path has been walked */
+ u32 walking:1; /* path is in the process of being walked */
u32 weak:1; /* path ignored for power management */
int (*connected)(struct snd_soc_dapm_widget *source,
/* Check the cache first. */
/* (Cache hit rate is typically around 35%.) */
- vma = mm->mmap_cache;
+ vma = ACCESS_ONCE(mm->mmap_cache);
if (!(vma && vma->vm_end > addr && vma->vm_start <= addr)) {
struct rb_node *rb_node;
struct vm_area_struct *vma;
/* check the cache first */
- vma = mm->mmap_cache;
+ vma = ACCESS_ONCE(mm->mmap_cache);
if (vma && vma->vm_start <= addr && vma->vm_end > addr)
return vma;
"Line Out", "Speaker", "HP Out", "CD",
"SPDIF Out", "Digital Out", "Modem Line", "Modem Hand",
"Line In", "Aux", "Mic", "Telephony",
- "SPDIF In", "Digitial In", "Reserved", "Other"
+ "SPDIF In", "Digital In", "Reserved", "Other"
};
return jack_types[(cfg & AC_DEFCFG_DEVICE)
unsigned char *buf, int *eld_size)
{
int i;
- int ret;
+ int ret = 0;
int size;
/*
static void path_power_down_sync(struct hda_codec *codec, struct nid_path *path)
{
struct hda_gen_spec *spec = codec->spec;
- bool changed;
+ bool changed = false;
int i;
if (!spec->power_down_unused || path->active)
* this may give more power-saving, but will take longer time to
* wake up.
*/
-static int power_save_controller = -1;
-module_param(power_save_controller, bint, 0644);
+static bool power_save_controller = 1;
+module_param(power_save_controller, bool, 0644);
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
#endif /* CONFIG_PM */
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
- if (power_save_controller > 0)
- return 0;
if (!power_save_controller ||
!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return -EBUSY;
_snd_printd(SND_PR_VERBOSE,
"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
- codec->addr, pin_nid, eld->monitor_present, eld->eld_valid);
+ codec->addr, pin_nid, pin_eld->monitor_present, eld->eld_valid);
if (eld->eld_valid) {
if (snd_hdmi_get_eld(codec, pin_nid, eld->eld_buffer,
const hda_nid_t *ssids;
if (codec->vendor_id == 0x10ec0272 || codec->vendor_id == 0x10ec0663 ||
- codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670)
+ codec->vendor_id == 0x10ec0665 || codec->vendor_id == 0x10ec0670 ||
+ codec->vendor_id == 0x10ec0671)
ssids = alc663_ssids;
else
ssids = alc662_ssids;
{ .id = 0x10ec0665, .name = "ALC665", .patch = patch_alc662 },
{ .id = 0x10ec0668, .name = "ALC668", .patch = patch_alc662 },
{ .id = 0x10ec0670, .name = "ALC670", .patch = patch_alc662 },
+ { .id = 0x10ec0671, .name = "ALC671", .patch = patch_alc662 },
{ .id = 0x10ec0680, .name = "ALC680", .patch = patch_alc680 },
{ .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 },
{ .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 },
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
width = SI476X_PCM_FORMAT_S8;
+ break;
case SNDRV_PCM_FORMAT_S16_LE:
width = SI476X_PCM_FORMAT_S16_LE;
break;
&buf_list);
if (!buf) {
adsp_err(dsp, "Out of memory\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto out_fw;
}
adsp_dbg(dsp, "%s.%d: Writing %d bytes at %x\n",
wm_adsp_buf_free(&buf_list);
out:
kfree(file);
- return 0;
+ return ret;
}
int wm_adsp1_init(struct wm_adsp *adsp)
if (imx_ssi->ac97_reset)
imx_ssi->ac97_reset(ac97);
+ /* First read sometimes fails, do a dummy read */
+ imx_ssi_ac97_read(ac97, 0);
}
static void imx_ssi_ac97_warm_reset(struct snd_ac97 *ac97)
if (imx_ssi->ac97_warm_reset)
imx_ssi->ac97_warm_reset(ac97);
+
+ /* First read sometimes fails, do a dummy read */
+ imx_ssi_ac97_read(ac97, 0);
}
struct snd_ac97_bus_ops soc_ac97_ops = {
.num_links = ARRAY_SIZE(pcm030_fabric_dai),
};
-static int __init pcm030_fabric_probe(struct platform_device *op)
+static int pcm030_fabric_probe(struct platform_device *op)
{
struct device_node *np = op->dev.of_node;
struct device_node *platform_np;
return 0;
}
-static struct snd_soc_platform sh7760_soc_platform = {
- .pcm_ops = &camelot_pcm_ops,
+static struct snd_soc_platform_driver sh7760_soc_platform = {
+ .ops = &camelot_pcm_ops,
.pcm_new = camelot_pcm_new,
.pcm_free = camelot_pcm_free,
};
if (params->mask) {
ret = regmap_read(codec->control_data, params->base, &val);
if (ret != 0)
- return ret;
+ goto out;
val &= params->mask;
((u32 *)data)[0] |= cpu_to_be32(val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
}
ret = regmap_raw_write(codec->control_data, params->base,
data, len);
+out:
kfree(data);
return ret;
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
propname, 2 * i, ret);
- kfree(routes);
return -EINVAL;
}
ret = of_property_read_string_index(np, propname,
dev_err(card->dev,
"ASoC: Property '%s' index %d could not be read: %d\n",
propname, (2 * i) + 1, ret);
- kfree(routes);
return -EINVAL;
}
}
if (path->weak)
continue;
+ if (path->walking)
+ return 1;
+
if (path->walked)
continue;
if (path->sink && path->connect) {
path->walked = 1;
+ path->walking = 1;
/* do we need to add this widget to the list ? */
if (list) {
dev_err(widget->dapm->dev,
"ASoC: could not add widget %s\n",
widget->name);
+ path->walking = 0;
return con;
}
}
con += is_connected_output_ep(path->sink, list);
+
+ path->walking = 0;
}
}
if (path->weak)
continue;
+ if (path->walking)
+ return 1;
+
if (path->walked)
continue;
if (path->source && path->connect) {
path->walked = 1;
+ path->walking = 1;
/* do we need to add this widget to the list ? */
if (list) {
dev_err(widget->dapm->dev,
"ASoC: could not add widget %s\n",
widget->name);
+ path->walking = 0;
return con;
}
}
con += is_connected_input_ep(path->source, list);
+
+ path->walking = 0;
}
}
static u64 spear_pcm_dmamask = DMA_BIT_MASK(32);
-static int spear_pcm_new(struct snd_card *card,
- struct snd_soc_dai *dai, struct snd_pcm *pcm)
+static int spear_pcm_new(struct snd_soc_pcm_runtime *rtd)
{
+ struct snd_card *card = rtd->card->snd_card;
int ret;
if (!card->dev->dma_mask)
if (!card->dev->coherent_dma_mask)
card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
- if (dai->driver->playback.channels_min) {
- ret = spear_pcm_preallocate_dma_buffer(pcm,
+ if (rtd->cpu_dai->driver->playback.channels_min) {
+ ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
SNDRV_PCM_STREAM_PLAYBACK,
spear_pcm_hardware.buffer_bytes_max);
if (ret)
return ret;
}
- if (dai->driver->capture.channels_min) {
- ret = spear_pcm_preallocate_dma_buffer(pcm,
+ if (rtd->cpu_dai->driver->capture.channels_min) {
+ ret = spear_pcm_preallocate_dma_buffer(rtd->pcm,
SNDRV_PCM_STREAM_CAPTURE,
spear_pcm_hardware.buffer_bytes_max);
if (ret)
{
struct usb_device *dev = chip->dev;
unsigned char data[4];
- int err, crate;
+ int err, cur_rate, prev_rate;
int clock = snd_usb_clock_find_source(chip, fmt->clock);
if (clock < 0)
return -ENXIO;
}
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data));
+ if (err < 0) {
+ snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
+ dev->devnum, iface, fmt->altsetting);
+ prev_rate = 0;
+ } else {
+ prev_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
+ }
+
data[0] = rate;
data[1] = rate >> 8;
data[2] = rate >> 16;
return err;
}
- if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
- UAC2_CS_CONTROL_SAM_FREQ << 8,
- snd_usb_ctrl_intf(chip) | (clock << 8),
- data, sizeof(data))) < 0) {
+ err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ UAC2_CS_CONTROL_SAM_FREQ << 8,
+ snd_usb_ctrl_intf(chip) | (clock << 8),
+ data, sizeof(data));
+ if (err < 0) {
snd_printk(KERN_WARNING "%d:%d:%d: cannot get freq (v2)\n",
dev->devnum, iface, fmt->altsetting);
- return err;
+ cur_rate = 0;
+ } else {
+ cur_rate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
}
- crate = data[0] | (data[1] << 8) | (data[2] << 16) | (data[3] << 24);
- if (crate != rate)
- snd_printd(KERN_WARNING "current rate %d is different from the runtime rate %d\n", crate, rate);
+ if (cur_rate != rate) {
+ snd_printd(KERN_WARNING
+ "current rate %d is different from the runtime rate %d\n",
+ cur_rate, rate);
+ }
+
+ /* Some devices doesn't respond to sample rate changes while the
+ * interface is active. */
+ if (rate != prev_rate) {
+ usb_set_interface(dev, iface, 0);
+ usb_set_interface(dev, iface, fmt->altsetting);
+ }
return 0;
}
projects / karo-tx-linux.git / commitdiff