{
struct thread_info *thread = current_thread_info();
int ret;
+ enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;
oops_enter();
console_verbose();
bust_spinlocks(1);
if (!user_mode(regs))
- report_bug(regs->ARM_pc, regs);
+ bug_type = report_bug(regs->ARM_pc, regs);
+ if (bug_type != BUG_TRAP_TYPE_NONE)
+ str = "Oops - BUG";
ret = __die(str, err, thread, regs);
if (regs && kexec_should_crash(thread->task))
#include <asm/page.h>
#define PROC_INFO \
+ . = ALIGN(4); \
VMLINUX_SYMBOL(__proc_info_begin) = .; \
*(.proc.info.init) \
VMLINUX_SYMBOL(__proc_info_end) = .;
.default_device = &sdp4430_lcd_device,
};
-static void omap_4430sdp_display_init(void)
+static void __init omap_4430sdp_display_init(void)
{
int r;
#define board_mux NULL
#endif
-static void omap4_sdp4430_wifi_mux_init(void)
+static void __init omap4_sdp4430_wifi_mux_init(void)
{
omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
OMAP_PIN_OFF_WAKEUPENABLE);
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
};
-static void omap4_sdp4430_wifi_init(void)
+static void __init omap4_sdp4430_wifi_init(void)
{
+ int ret;
+
omap4_sdp4430_wifi_mux_init();
- if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
- pr_err("Error setting wl12xx data\n");
- platform_device_register(&omap_vwlan_device);
+ ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data);
+ if (ret)
+ pr_err("Error setting wl12xx data: %d\n", ret);
+ ret = platform_device_register(&omap_vwlan_device);
+ if (ret)
+ pr_err("Error registering wl12xx device: %d\n", ret);
}
static void __init omap_4430sdp_init(void)
{ OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" },
};
+static void __init omap3_evm_wl12xx_init(void)
+{
+#ifdef CONFIG_WL12XX_PLATFORM_DATA
+ int ret;
+
+ /* WL12xx WLAN Init */
+ ret = wl12xx_set_platform_data(&omap3evm_wlan_data);
+ if (ret)
+ pr_err("error setting wl12xx data: %d\n", ret);
+ ret = platform_device_register(&omap3evm_wlan_regulator);
+ if (ret)
+ pr_err("error registering wl12xx device: %d\n", ret);
+#endif
+}
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
omap3_evm_display_init();
-
-#ifdef CONFIG_WL12XX_PLATFORM_DATA
- /* WL12xx WLAN Init */
- if (wl12xx_set_platform_data(&omap3evm_wlan_data))
- pr_err("error setting wl12xx data\n");
- platform_device_register(&omap3evm_wlan_regulator);
-#endif
+ omap3_evm_wl12xx_init();
}
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
static void __init omap4_panda_init(void)
{
int package = OMAP_PACKAGE_CBS;
+ int ret;
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
- if (wl12xx_set_platform_data(&omap_panda_wlan_data))
- pr_err("error setting wl12xx data\n");
+ ret = wl12xx_set_platform_data(&omap_panda_wlan_data);
+ if (ret)
+ pr_err("error setting wl12xx data: %d\n", ret);
omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
void __init zoom_peripherals_init(void)
{
- if (wl12xx_set_platform_data(&omap_zoom_wlan_data))
- pr_err("error setting wl12xx data\n");
+ int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data);
+
+ if (ret)
+ pr_err("error setting wl12xx data: %d\n", ret);
omap_i2c_init();
platform_device_register(&omap_vwlan_device);
}
}
-static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
- struct omap_mmc_platform_data *mmc)
+static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
+ struct omap_mmc_platform_data *mmc)
{
char *hc_name;
#define MAX_OMAP_MMC_HWMOD_NAME_LEN 16
-void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
+void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
kfree(mmc_data);
}
-void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
{
u32 reg;
static char *omap_mux_options;
-static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
- int gpio, int val)
+static int _omap_mux_init_gpio(struct omap_mux_partition *partition,
+ int gpio, int val)
{
struct omap_mux_entry *e;
struct omap_mux *gpio_mux = NULL;
return 0;
}
-int __init omap_mux_init_gpio(int gpio, int val)
+int omap_mux_init_gpio(int gpio, int val)
{
struct omap_mux_partition *partition;
int ret;
return -ENODEV;
}
-static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
- const char *muxname,
- struct omap_mux **found_mux)
+static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
+ const char *muxname,
+ struct omap_mux **found_mux)
{
struct omap_mux *mux = NULL;
struct omap_mux_entry *e;
return -ENODEV;
}
-int __init omap_mux_init_signal(const char *muxname, int val)
+int omap_mux_init_signal(const char *muxname, int val)
{
struct omap_mux_partition *partition = NULL;
struct omap_mux *mux = NULL;
omap_mux_package_init_balls(package_balls, superset);
}
-static void omap_mux_init_signals(struct omap_mux_partition *partition,
- struct omap_board_mux *board_mux)
+static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
+ struct omap_board_mux *board_mux)
{
omap_mux_set_cmdline_signals();
omap_mux_write_array(partition, board_mux);
{
}
-static void omap_mux_init_signals(struct omap_mux_partition *partition,
- struct omap_board_mux *board_mux)
+static void __init omap_mux_init_signals(struct omap_mux_partition *partition,
+ struct omap_board_mux *board_mux)
{
}
#include <linux/linkage.h>
#include <linux/init.h>
+ __CPUINIT
/*
* OMAP4 specific entry point for secondary CPU to jump from ROM
* code. This routine also provides a holding flag into which
if (oh->_state != _HWMOD_STATE_INITIALIZED &&
oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_DISABLED) {
- WARN(1, "omap_hwmod: %s: enabled state can only be entered "
- "from initialized, idle, or disabled state\n", oh->name);
+ WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n",
+ oh->name);
return -EINVAL;
}
pr_debug("omap_hwmod: %s: idling\n", oh->name);
if (oh->_state != _HWMOD_STATE_ENABLED) {
- WARN(1, "omap_hwmod: %s: idle state can only be entered from "
- "enabled state\n", oh->name);
+ WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
+ oh->name);
return -EINVAL;
}
if (oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_ENABLED) {
- WARN(1, "omap_hwmod: %s: disabled state can only be entered "
- "from idle, or enabled state\n", oh->name);
+ WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
+ oh->name);
return -EINVAL;
}
BUG_ON(!oh);
if (!oh->class->sysc || !oh->class->sysc->sysc_flags) {
- WARN(1, "omap_device: %s: OCP barrier impossible due to "
- "device configuration\n", oh->name);
+ WARN(1, "omap_device: %s: OCP barrier impossible due to device configuration\n",
+ oh->name);
return;
}
#include "common.h"
#include <plat/cpu.h>
+#include <plat/irqs.h>
#include <plat/prcm.h>
#include "vp.h"
* omap_vc_i2c_init - initialize I2C interface to PMIC
* @voltdm: voltage domain containing VC data
*
- * Use PMIC supplied seetings for I2C high-speed mode and
+ * Use PMIC supplied settings for I2C high-speed mode and
* master code (if set) and program the VC I2C configuration
* register.
*
if (initialized) {
if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
- pr_warn("%s: I2C config for all channels must match.",
- __func__);
+ pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
+ __func__, voltdm->name, i2c_high_speed);
return;
}
u32 val;
if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
- pr_err("%s: PMIC info requried to configure vc for"
- "vdd_%s not populated.Hence cannot initialize vc\n",
- __func__, voltdm->name);
+ pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
return;
}
u32 val, sys_clk_rate, timeout, waittime;
u32 vddmin, vddmax, vstepmin, vstepmax;
+ if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) {
+ pr_err("%s: No PMIC info for vdd_%s\n", __func__, voltdm->name);
+ return;
+ }
+
if (!voltdm->read || !voltdm->write) {
pr_err("%s: No read/write API for accessing vdd_%s regs\n",
__func__, voltdm->name);
and r1, r1, #7 @ mask of the bits for current cache only
cmp r1, #2 @ see what cache we have at this level
blt skip @ skip if no cache, or just i-cache
+#ifdef CONFIG_PREEMPT
+ save_and_disable_irqs r9 @ make cssr&csidr read atomic
+#endif
mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr
isb @ isb to sych the new cssr&csidr
mrc p15, 1, r1, c0, c0, 0 @ read the new csidr
+#ifdef CONFIG_PREEMPT
+ restore_irqs_notrace r9
+#endif
and r2, r1, #7 @ extract the length of the cache lines
add r2, r2, #4 @ add 4 (line length offset)
ldr r4, =0x3ff
extern void fpu_init(void);
extern void mxcsr_feature_mask_init(void);
extern int init_fpu(struct task_struct *child);
-extern asmlinkage void math_state_restore(void);
-extern void __math_state_restore(void);
+extern void __math_state_restore(struct task_struct *);
+extern void math_state_restore(void);
extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
extern user_regset_active_fn fpregs_active, xfpregs_active;
#endif /* CONFIG_X86_64 */
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (__get_cpu_var(kernel_cpustat).cpustat[CPUTIME_USER])
-#endif
-
/*
- * These must be called with preempt disabled
+ * These must be called with preempt disabled. Returns
+ * 'true' if the FPU state is still intact.
*/
-static inline void fpu_save_init(struct fpu *fpu)
+static inline int fpu_save_init(struct fpu *fpu)
{
if (use_xsave()) {
fpu_xsave(fpu);
* xsave header may indicate the init state of the FP.
*/
if (!(fpu->state->xsave.xsave_hdr.xstate_bv & XSTATE_FP))
- return;
+ return 1;
} else if (use_fxsr()) {
fpu_fxsave(fpu);
} else {
asm volatile("fnsave %[fx]; fwait"
: [fx] "=m" (fpu->state->fsave));
- return;
+ return 0;
}
- if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES))
+ /*
+ * If exceptions are pending, we need to clear them so
+ * that we don't randomly get exceptions later.
+ *
+ * FIXME! Is this perhaps only true for the old-style
+ * irq13 case? Maybe we could leave the x87 state
+ * intact otherwise?
+ */
+ if (unlikely(fpu->state->fxsave.swd & X87_FSW_ES)) {
asm volatile("fnclex");
-
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- ASM_NOP8 ASM_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %P[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
+ return 0;
+ }
+ return 1;
}
-static inline void __save_init_fpu(struct task_struct *tsk)
+static inline int __save_init_fpu(struct task_struct *tsk)
{
- fpu_save_init(&tsk->thread.fpu);
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ return fpu_save_init(&tsk->thread.fpu);
}
static inline int fpu_fxrstor_checking(struct fpu *fpu)
}
/*
- * Signal frame handlers...
+ * Software FPU state helpers. Careful: these need to
+ * be preemption protection *and* they need to be
+ * properly paired with the CR0.TS changes!
*/
-extern int save_i387_xstate(void __user *buf);
-extern int restore_i387_xstate(void __user *buf);
+static inline int __thread_has_fpu(struct task_struct *tsk)
+{
+ return tsk->thread.has_fpu;
+}
-static inline void __unlazy_fpu(struct task_struct *tsk)
+/* Must be paired with an 'stts' after! */
+static inline void __thread_clear_has_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- __save_init_fpu(tsk);
- stts();
- } else
- tsk->fpu_counter = 0;
+ tsk->thread.has_fpu = 0;
+}
+
+/* Must be paired with a 'clts' before! */
+static inline void __thread_set_has_fpu(struct task_struct *tsk)
+{
+ tsk->thread.has_fpu = 1;
}
+/*
+ * Encapsulate the CR0.TS handling together with the
+ * software flag.
+ *
+ * These generally need preemption protection to work,
+ * do try to avoid using these on their own.
+ */
+static inline void __thread_fpu_end(struct task_struct *tsk)
+{
+ __thread_clear_has_fpu(tsk);
+ stts();
+}
+
+static inline void __thread_fpu_begin(struct task_struct *tsk)
+{
+ clts();
+ __thread_set_has_fpu(tsk);
+}
+
+/*
+ * FPU state switching for scheduling.
+ *
+ * This is a two-stage process:
+ *
+ * - switch_fpu_prepare() saves the old state and
+ * sets the new state of the CR0.TS bit. This is
+ * done within the context of the old process.
+ *
+ * - switch_fpu_finish() restores the new state as
+ * necessary.
+ */
+typedef struct { int preload; } fpu_switch_t;
+
+/*
+ * FIXME! We could do a totally lazy restore, but we need to
+ * add a per-cpu "this was the task that last touched the FPU
+ * on this CPU" variable, and the task needs to have a "I last
+ * touched the FPU on this CPU" and check them.
+ *
+ * We don't do that yet, so "fpu_lazy_restore()" always returns
+ * false, but some day..
+ */
+#define fpu_lazy_restore(tsk) (0)
+#define fpu_lazy_state_intact(tsk) do { } while (0)
+
+static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct task_struct *new)
+{
+ fpu_switch_t fpu;
+
+ fpu.preload = tsk_used_math(new) && new->fpu_counter > 5;
+ if (__thread_has_fpu(old)) {
+ if (__save_init_fpu(old))
+ fpu_lazy_state_intact(old);
+ __thread_clear_has_fpu(old);
+ old->fpu_counter++;
+
+ /* Don't change CR0.TS if we just switch! */
+ if (fpu.preload) {
+ __thread_set_has_fpu(new);
+ prefetch(new->thread.fpu.state);
+ } else
+ stts();
+ } else {
+ old->fpu_counter = 0;
+ if (fpu.preload) {
+ if (fpu_lazy_restore(new))
+ fpu.preload = 0;
+ else
+ prefetch(new->thread.fpu.state);
+ __thread_fpu_begin(new);
+ }
+ }
+ return fpu;
+}
+
+/*
+ * By the time this gets called, we've already cleared CR0.TS and
+ * given the process the FPU if we are going to preload the FPU
+ * state - all we need to do is to conditionally restore the register
+ * state itself.
+ */
+static inline void switch_fpu_finish(struct task_struct *new, fpu_switch_t fpu)
+{
+ if (fpu.preload)
+ __math_state_restore(new);
+}
+
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387_xstate(void __user *buf);
+extern int restore_i387_xstate(void __user *buf);
+
static inline void __clear_fpu(struct task_struct *tsk)
{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (__thread_has_fpu(tsk)) {
/* Ignore delayed exceptions from user space */
asm volatile("1: fwait\n"
"2:\n"
_ASM_EXTABLE(1b, 2b));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ __thread_fpu_end(tsk);
}
}
+/*
+ * Were we in an interrupt that interrupted kernel mode?
+ *
+ * We can do a kernel_fpu_begin/end() pair *ONLY* if that
+ * pair does nothing at all: the thread must not have fpu (so
+ * that we don't try to save the FPU state), and TS must
+ * be set (so that the clts/stts pair does nothing that is
+ * visible in the interrupted kernel thread).
+ */
+static inline bool interrupted_kernel_fpu_idle(void)
+{
+ return !__thread_has_fpu(current) &&
+ (read_cr0() & X86_CR0_TS);
+}
+
+/*
+ * Were we in user mode (or vm86 mode) when we were
+ * interrupted?
+ *
+ * Doing kernel_fpu_begin/end() is ok if we are running
+ * in an interrupt context from user mode - we'll just
+ * save the FPU state as required.
+ */
+static inline bool interrupted_user_mode(void)
+{
+ struct pt_regs *regs = get_irq_regs();
+ return regs && user_mode_vm(regs);
+}
+
+/*
+ * Can we use the FPU in kernel mode with the
+ * whole "kernel_fpu_begin/end()" sequence?
+ *
+ * It's always ok in process context (ie "not interrupt")
+ * but it is sometimes ok even from an irq.
+ */
+static inline bool irq_fpu_usable(void)
+{
+ return !in_interrupt() ||
+ interrupted_user_mode() ||
+ interrupted_kernel_fpu_idle();
+}
+
static inline void kernel_fpu_begin(void)
{
- struct thread_info *me = current_thread_info();
+ struct task_struct *me = current;
+
+ WARN_ON_ONCE(!irq_fpu_usable());
preempt_disable();
- if (me->status & TS_USEDFPU)
- __save_init_fpu(me->task);
- else
+ if (__thread_has_fpu(me)) {
+ __save_init_fpu(me);
+ __thread_clear_has_fpu(me);
+ /* We do 'stts()' in kernel_fpu_end() */
+ } else
clts();
}
preempt_enable();
}
-static inline bool irq_fpu_usable(void)
-{
- struct pt_regs *regs;
-
- return !in_interrupt() || !(regs = get_irq_regs()) || \
- user_mode(regs) || (read_cr0() & X86_CR0_TS);
-}
-
/*
* Some instructions like VIA's padlock instructions generate a spurious
* DNA fault but don't modify SSE registers. And these instructions
stts();
}
+/*
+ * The question "does this thread have fpu access?"
+ * is slightly racy, since preemption could come in
+ * and revoke it immediately after the test.
+ *
+ * However, even in that very unlikely scenario,
+ * we can just assume we have FPU access - typically
+ * to save the FP state - we'll just take a #NM
+ * fault and get the FPU access back.
+ *
+ * The actual user_fpu_begin/end() functions
+ * need to be preemption-safe, though.
+ *
+ * NOTE! user_fpu_end() must be used only after you
+ * have saved the FP state, and user_fpu_begin() must
+ * be used only immediately before restoring it.
+ * These functions do not do any save/restore on
+ * their own.
+ */
+static inline int user_has_fpu(void)
+{
+ return __thread_has_fpu(current);
+}
+
+static inline void user_fpu_end(void)
+{
+ preempt_disable();
+ __thread_fpu_end(current);
+ preempt_enable();
+}
+
+static inline void user_fpu_begin(void)
+{
+ preempt_disable();
+ if (!user_has_fpu())
+ __thread_fpu_begin(current);
+ preempt_enable();
+}
+
/*
* These disable preemption on their own and are safe
*/
static inline void save_init_fpu(struct task_struct *tsk)
{
+ WARN_ON_ONCE(!__thread_has_fpu(tsk));
preempt_disable();
__save_init_fpu(tsk);
- stts();
+ __thread_fpu_end(tsk);
preempt_enable();
}
static inline void unlazy_fpu(struct task_struct *tsk)
{
preempt_disable();
- __unlazy_fpu(tsk);
+ if (__thread_has_fpu(tsk)) {
+ __save_init_fpu(tsk);
+ __thread_fpu_end(tsk);
+ } else
+ tsk->fpu_counter = 0;
preempt_enable();
}
unsigned long trap_no;
unsigned long error_code;
/* floating point and extended processor state */
+ unsigned long has_fpu;
struct fpu fpu;
#ifdef CONFIG_X86_32
/* Virtual 86 mode info */
* ever touches our thread-synchronous status, so we don't
* have to worry about atomic accesses.
*/
-#define TS_USEDFPU 0x0001 /* FPU was used by this task
- this quantum (SMP) */
#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/
#define TS_POLLING 0x0004 /* idle task polling need_resched,
skip sending interrupt */
*next = &next_p->thread;
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
- bool preload_fpu;
+ fpu_switch_t fpu;
/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
- __unlazy_fpu(prev_p);
-
- /* we're going to use this soon, after a few expensive things */
- if (preload_fpu)
- prefetch(next->fpu.state);
+ fpu = switch_fpu_prepare(prev_p, next_p);
/*
* Reload esp0.
task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
__switch_to_xtra(prev_p, next_p, tss);
- /* If we're going to preload the fpu context, make sure clts
- is run while we're batching the cpu state updates. */
- if (preload_fpu)
- clts();
-
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
*/
arch_end_context_switch(next_p);
- if (preload_fpu)
- __math_state_restore();
-
/*
* Restore %gs if needed (which is common)
*/
if (prev->gs | next->gs)
lazy_load_gs(next->gs);
+ switch_fpu_finish(next_p, fpu);
+
percpu_write(current_task, next_p);
return prev_p;
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
unsigned fsindex, gsindex;
- bool preload_fpu;
+ fpu_switch_t fpu;
- /*
- * If the task has used fpu the last 5 timeslices, just do a full
- * restore of the math state immediately to avoid the trap; the
- * chances of needing FPU soon are obviously high now
- */
- preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
- /* we're going to use this soon, after a few expensive things */
- if (preload_fpu)
- prefetch(next->fpu.state);
+ fpu = switch_fpu_prepare(prev_p, next_p);
/*
* Reload esp0, LDT and the page table pointer:
load_TLS(next, cpu);
- /* Must be after DS reload */
- __unlazy_fpu(prev_p);
-
- /* Make sure cpu is ready for new context */
- if (preload_fpu)
- clts();
-
/*
* Leave lazy mode, flushing any hypercalls made here.
* This must be done before restoring TLS segments so
wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
prev->gsindex = gsindex;
+ switch_fpu_finish(next_p, fpu);
+
/*
* Switch the PDA and FPU contexts.
*/
task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
__switch_to_xtra(prev_p, next_p, tss);
- /*
- * Preload the FPU context, now that we've determined that the
- * task is likely to be using it.
- */
- if (preload_fpu)
- __math_state_restore();
-
return prev_p;
}
}
/*
- * __math_state_restore assumes that cr0.TS is already clear and the
- * fpu state is all ready for use. Used during context switch.
+ * This gets called with the process already owning the
+ * FPU state, and with CR0.TS cleared. It just needs to
+ * restore the FPU register state.
*/
-void __math_state_restore(void)
+void __math_state_restore(struct task_struct *tsk)
{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = thread->task;
+ /* We need a safe address that is cheap to find and that is already
+ in L1. We've just brought in "tsk->thread.has_fpu", so use that */
+#define safe_address (tsk->thread.has_fpu)
+
+ /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. safe_address is a random variable that should be in L1 */
+ alternative_input(
+ ASM_NOP8 ASM_NOP2,
+ "emms\n\t" /* clear stack tags */
+ "fildl %P[addr]", /* set F?P to defined value */
+ X86_FEATURE_FXSAVE_LEAK,
+ [addr] "m" (safe_address));
/*
* Paranoid restore. send a SIGSEGV if we fail to restore the state.
*/
if (unlikely(restore_fpu_checking(tsk))) {
- stts();
+ __thread_fpu_end(tsk);
force_sig(SIGSEGV, tsk);
return;
}
-
- thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
- tsk->fpu_counter++;
}
/*
* Careful.. There are problems with IBM-designed IRQ13 behaviour.
* Don't touch unless you *really* know how it works.
*
- * Must be called with kernel preemption disabled (in this case,
- * local interrupts are disabled at the call-site in entry.S).
+ * Must be called with kernel preemption disabled (eg with local
+ * local interrupts as in the case of do_device_not_available).
*/
-asmlinkage void math_state_restore(void)
+void math_state_restore(void)
{
- struct thread_info *thread = current_thread_info();
- struct task_struct *tsk = thread->task;
+ struct task_struct *tsk = current;
if (!tsk_used_math(tsk)) {
local_irq_enable();
local_irq_disable();
}
- clts(); /* Allow maths ops (or we recurse) */
+ __thread_fpu_begin(tsk);
+ __math_state_restore(tsk);
- __math_state_restore();
+ tsk->fpu_counter++;
}
EXPORT_SYMBOL_GPL(math_state_restore);
if (!fx)
return;
- BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU);
+ BUG_ON(__thread_has_fpu(tsk));
xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv;
if (!used_math())
return 0;
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ if (user_has_fpu()) {
if (use_xsave())
err = xsave_user(buf);
else
if (err)
return err;
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
+ user_fpu_end();
} else {
sanitize_i387_state(tsk);
if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
return err;
}
- if (!(task_thread_info(current)->status & TS_USEDFPU)) {
- clts();
- task_thread_info(current)->status |= TS_USEDFPU;
- }
+ user_fpu_begin();
if (use_xsave())
err = restore_user_xstate(buf);
else
#ifdef CONFIG_X86_64
wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
#endif
- if (current_thread_info()->status & TS_USEDFPU)
+ if (__thread_has_fpu(current))
clts();
load_gdt(&__get_cpu_var(host_gdt));
}
int __init pci_xen_hvm_init(void)
{
- if (!xen_feature(XENFEAT_hvm_pirqs))
+ if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
return 0;
#ifdef CONFIG_ACPI
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
cpu_bringup();
+ /*
+ * Balance out the preempt calls - as we are running in cpu_idle
+ * loop which has been called at bootup from cpu_bringup_and_idle.
+ * The cpucpu_bringup_and_idle called cpu_bringup which made a
+ * preempt_disable() So this preempt_enable will balance it out.
+ */
+ preempt_enable();
}
#else /* !CONFIG_HOTPLUG_CPU */
return (x & y) | (z & (x | y));
}
-static inline u64 RORu64(u64 x, u64 y)
-{
- return (x >> y) | (x << (64 - y));
-}
-
static const u64 sha512_K[80] = {
0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, 0xb5c0fbcfec4d3b2fULL,
0xe9b5dba58189dbbcULL, 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL,
0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL,
};
-#define e0(x) (RORu64(x,28) ^ RORu64(x,34) ^ RORu64(x,39))
-#define e1(x) (RORu64(x,14) ^ RORu64(x,18) ^ RORu64(x,41))
-#define s0(x) (RORu64(x, 1) ^ RORu64(x, 8) ^ (x >> 7))
-#define s1(x) (RORu64(x,19) ^ RORu64(x,61) ^ (x >> 6))
+#define e0(x) (ror64(x,28) ^ ror64(x,34) ^ ror64(x,39))
+#define e1(x) (ror64(x,14) ^ ror64(x,18) ^ ror64(x,41))
+#define s0(x) (ror64(x, 1) ^ ror64(x, 8) ^ (x >> 7))
+#define s1(x) (ror64(x,19) ^ ror64(x,61) ^ (x >> 6))
static inline void LOAD_OP(int I, u64 *W, const u8 *input)
{
static inline void BLEND_OP(int I, u64 *W)
{
- W[I % 16] += s1(W[(I-2) % 16]) + W[(I-7) % 16] + s0(W[(I-15) % 16]);
+ W[I & 15] += s1(W[(I-2) & 15]) + W[(I-7) & 15] + s0(W[(I-15) & 15]);
}
static void
int i;
u64 W[16];
- /* load the input */
- for (i = 0; i < 16; i++)
- LOAD_OP(i, W, input);
-
/* load the state into our registers */
a=state[0]; b=state[1]; c=state[2]; d=state[3];
e=state[4]; f=state[5]; g=state[6]; h=state[7];
-#define SHA512_0_15(i, a, b, c, d, e, f, g, h) \
- t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[i]; \
- t2 = e0(a) + Maj(a, b, c); \
- d += t1; \
- h = t1 + t2
-
-#define SHA512_16_79(i, a, b, c, d, e, f, g, h) \
- BLEND_OP(i, W); \
- t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)%16]; \
- t2 = e0(a) + Maj(a, b, c); \
- d += t1; \
- h = t1 + t2
-
- for (i = 0; i < 16; i += 8) {
- SHA512_0_15(i, a, b, c, d, e, f, g, h);
- SHA512_0_15(i + 1, h, a, b, c, d, e, f, g);
- SHA512_0_15(i + 2, g, h, a, b, c, d, e, f);
- SHA512_0_15(i + 3, f, g, h, a, b, c, d, e);
- SHA512_0_15(i + 4, e, f, g, h, a, b, c, d);
- SHA512_0_15(i + 5, d, e, f, g, h, a, b, c);
- SHA512_0_15(i + 6, c, d, e, f, g, h, a, b);
- SHA512_0_15(i + 7, b, c, d, e, f, g, h, a);
- }
- for (i = 16; i < 80; i += 8) {
- SHA512_16_79(i, a, b, c, d, e, f, g, h);
- SHA512_16_79(i + 1, h, a, b, c, d, e, f, g);
- SHA512_16_79(i + 2, g, h, a, b, c, d, e, f);
- SHA512_16_79(i + 3, f, g, h, a, b, c, d, e);
- SHA512_16_79(i + 4, e, f, g, h, a, b, c, d);
- SHA512_16_79(i + 5, d, e, f, g, h, a, b, c);
- SHA512_16_79(i + 6, c, d, e, f, g, h, a, b);
- SHA512_16_79(i + 7, b, c, d, e, f, g, h, a);
+ /* now iterate */
+ for (i=0; i<80; i+=8) {
+ if (!(i & 8)) {
+ int j;
+
+ if (i < 16) {
+ /* load the input */
+ for (j = 0; j < 16; j++)
+ LOAD_OP(i + j, W, input);
+ } else {
+ for (j = 0; j < 16; j++) {
+ BLEND_OP(i + j, W);
+ }
+ }
+ }
+
+ t1 = h + e1(e) + Ch(e,f,g) + sha512_K[i ] + W[(i & 15)];
+ t2 = e0(a) + Maj(a,b,c); d+=t1; h=t1+t2;
+ t1 = g + e1(d) + Ch(d,e,f) + sha512_K[i+1] + W[(i & 15) + 1];
+ t2 = e0(h) + Maj(h,a,b); c+=t1; g=t1+t2;
+ t1 = f + e1(c) + Ch(c,d,e) + sha512_K[i+2] + W[(i & 15) + 2];
+ t2 = e0(g) + Maj(g,h,a); b+=t1; f=t1+t2;
+ t1 = e + e1(b) + Ch(b,c,d) + sha512_K[i+3] + W[(i & 15) + 3];
+ t2 = e0(f) + Maj(f,g,h); a+=t1; e=t1+t2;
+ t1 = d + e1(a) + Ch(a,b,c) + sha512_K[i+4] + W[(i & 15) + 4];
+ t2 = e0(e) + Maj(e,f,g); h+=t1; d=t1+t2;
+ t1 = c + e1(h) + Ch(h,a,b) + sha512_K[i+5] + W[(i & 15) + 5];
+ t2 = e0(d) + Maj(d,e,f); g+=t1; c=t1+t2;
+ t1 = b + e1(g) + Ch(g,h,a) + sha512_K[i+6] + W[(i & 15) + 6];
+ t2 = e0(c) + Maj(c,d,e); f+=t1; b=t1+t2;
+ t1 = a + e1(f) + Ch(f,g,h) + sha512_K[i+7] + W[(i & 15) + 7];
+ t2 = e0(b) + Maj(b,c,d); e+=t1; a=t1+t2;
}
state[0] += a; state[1] += b; state[2] += c; state[3] += d;
WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM);
break;
default:
- msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
- WREG32(RADEON_MSI_REARM_EN, msi_rearm);
- WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
break;
}
}
bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP5;
}
}
+ if ((radeon_encoder->devices & ATOM_DEVICE_DFP6_SUPPORT) &&
+ (radeon_connector->devices & ATOM_DEVICE_DFP6_SUPPORT)) {
+ if (connected) {
+ DRM_DEBUG_KMS("DFP6 connected\n");
+ bios_0_scratch |= ATOM_S0_DFP6;
+ bios_3_scratch |= ATOM_S3_DFP6_ACTIVE;
+ bios_6_scratch |= ATOM_S6_ACC_REQ_DFP6;
+ } else {
+ DRM_DEBUG_KMS("DFP6 disconnected\n");
+ bios_0_scratch &= ~ATOM_S0_DFP6;
+ bios_3_scratch &= ~ATOM_S3_DFP6_ACTIVE;
+ bios_6_scratch &= ~ATOM_S6_ACC_REQ_DFP6;
+ }
+ }
if (rdev->family >= CHIP_R600) {
WREG32(R600_BIOS_0_SCRATCH, bios_0_scratch);
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
uint32_t bios_3_scratch;
+ if (ASIC_IS_DCE4(rdev))
+ return;
+
if (rdev->family >= CHIP_R600)
bios_3_scratch = RREG32(R600_BIOS_3_SCRATCH);
else
int not_processed = 0;
read_lock_irqsave(&rdev->fence_lock, irq_flags);
- if (!rdev->fence_drv[ring].initialized)
+ if (!rdev->fence_drv[ring].initialized) {
+ read_unlock_irqrestore(&rdev->fence_lock, irq_flags);
return 0;
+ }
if (!list_empty(&rdev->fence_drv[ring].emitted)) {
struct list_head *ptr;
WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM);
break;
default:
- msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
- WREG32(RADEON_MSI_REARM_EN, msi_rearm);
- WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ WREG32(RADEON_MSI_REARM_EN, RV370_MSI_REARM_EN);
break;
}
}
config TWL4030_CORE
bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
- depends on I2C=y && GENERIC_HARDIRQS && IRQ_DOMAIN
+ depends on I2C=y && GENERIC_HARDIRQS
help
Say yes here if you have TWL4030 / TWL6030 family chip on your board.
This core driver provides register access and IRQ handling
static struct twl_client twl_modules[TWL_NUM_SLAVES];
+#ifdef CONFIG_IRQ_DOMAIN
static struct irq_domain domain;
+#endif
/* mapping the module id to slave id and base address */
struct twl_mapping {
pdata->irq_base = status;
pdata->irq_end = pdata->irq_base + nr_irqs;
+#ifdef CONFIG_IRQ_DOMAIN
domain.irq_base = pdata->irq_base;
domain.nr_irq = nr_irqs;
-#ifdef CONFIG_OF_IRQ
domain.of_node = of_node_get(node);
domain.ops = &irq_domain_simple_ops;
-#endif
irq_domain_add(&domain);
+#endif
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) == 0) {
dev_dbg(&client->dev, "can't talk I2C?\n");
[RES_MAIN_REF] = 0x94,
};
-static int __init twl4030_write_script_byte(u8 address, u8 byte)
+static int __devinit twl4030_write_script_byte(u8 address, u8 byte)
{
int err;
return err;
}
-static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
+static int __devinit twl4030_write_script_ins(u8 address, u16 pmb_message,
u8 delay, u8 next)
{
int err;
return err;
}
-static int __init twl4030_write_script(u8 address, struct twl4030_ins *script,
+static int __devinit twl4030_write_script(u8 address, struct twl4030_ins *script,
int len)
{
int err;
return err;
}
-static int __init twl4030_config_wakeup3_sequence(u8 address)
+static int __devinit twl4030_config_wakeup3_sequence(u8 address)
{
int err;
u8 data;
return err;
}
-static int __init twl4030_config_wakeup12_sequence(u8 address)
+static int __devinit twl4030_config_wakeup12_sequence(u8 address)
{
int err = 0;
u8 data;
return err;
}
-static int __init twl4030_config_sleep_sequence(u8 address)
+static int __devinit twl4030_config_sleep_sequence(u8 address)
{
int err;
return err;
}
-static int __init twl4030_config_warmreset_sequence(u8 address)
+static int __devinit twl4030_config_warmreset_sequence(u8 address)
{
int err;
u8 rd_data;
return err;
}
-static int __init twl4030_configure_resource(struct twl4030_resconfig *rconfig)
+static int __devinit twl4030_configure_resource(struct twl4030_resconfig *rconfig)
{
int rconfig_addr;
int err;
return 0;
}
-static int __init load_twl4030_script(struct twl4030_script *tscript,
+static int __devinit load_twl4030_script(struct twl4030_script *tscript,
u8 address)
{
int err;
pr_err("TWL4030 Unable to power off\n");
}
-void __init twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
+void __devinit twl4030_power_init(struct twl4030_power_data *twl4030_scripts)
{
int err = 0;
int i;
md->power_ro_lock.show = power_ro_lock_show;
md->power_ro_lock.store = power_ro_lock_store;
+ sysfs_attr_init(&md->power_ro_lock.attr);
md->power_ro_lock.attr.mode = mode;
md->power_ro_lock.attr.name =
"ro_lock_until_next_power_on";
static void mmc_pre_req(struct mmc_host *host, struct mmc_request *mrq,
bool is_first_req)
{
- if (host->ops->pre_req)
+ if (host->ops->pre_req) {
+ mmc_host_clk_hold(host);
host->ops->pre_req(host, mrq, is_first_req);
+ mmc_host_clk_release(host);
+ }
}
/**
static void mmc_post_req(struct mmc_host *host, struct mmc_request *mrq,
int err)
{
- if (host->ops->post_req)
+ if (host->ops->post_req) {
+ mmc_host_clk_hold(host);
host->ops->post_req(host, mrq, err);
+ mmc_host_clk_release(host);
+ }
}
/**
int err;
host->en_dis_recurs = 1;
+ mmc_host_clk_hold(host);
err = host->ops->enable(host);
+ mmc_host_clk_release(host);
host->en_dis_recurs = 0;
if (err) {
int err;
host->en_dis_recurs = 1;
+ mmc_host_clk_hold(host);
err = host->ops->disable(host, lazy);
+ mmc_host_clk_release(host);
host->en_dis_recurs = 0;
if (err < 0) {
* might not allow this operation
*/
voltage = regulator_get_voltage(supply);
+
+ if (mmc->caps2 & MMC_CAP2_BROKEN_VOLTAGE)
+ min_uV = max_uV = voltage;
+
if (voltage < 0)
result = voltage;
else if (voltage < min_uV || voltage > max_uV)
host->ios.signal_voltage = signal_voltage;
- if (host->ops->start_signal_voltage_switch)
+ if (host->ops->start_signal_voltage_switch) {
+ mmc_host_clk_hold(host);
err = host->ops->start_signal_voltage_switch(host, &host->ios);
+ mmc_host_clk_release(host);
+ }
return err;
}
int err = 0;
card = host->card;
+ mmc_claim_host(host);
/*
* Send power notify command only if card
/* Set the card state to no notification after the poweroff */
card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
}
+ mmc_release_host(host);
}
/*
void mmc_power_off(struct mmc_host *host)
{
+ int err = 0;
mmc_host_clk_hold(host);
host->ios.clock = 0;
host->ios.vdd = 0;
- mmc_poweroff_notify(host);
+ /*
+ * For eMMC 4.5 device send AWAKE command before
+ * POWER_OFF_NOTIFY command, because in sleep state
+ * eMMC 4.5 devices respond to only RESET and AWAKE cmd
+ */
+ if (host->card && mmc_card_is_sleep(host->card) &&
+ host->bus_ops->resume) {
+ err = host->bus_ops->resume(host);
+
+ if (!err)
+ mmc_poweroff_notify(host);
+ else
+ pr_warning("%s: error %d during resume "
+ "(continue with poweroff sequence)\n",
+ mmc_hostname(host), err);
+ }
/*
* Reset ocr mask to be the highest possible voltage supported for
*/
if (mmc_try_claim_host(host)) {
if (host->bus_ops->suspend) {
- /*
- * For eMMC 4.5 device send notify command
- * before sleep, because in sleep state eMMC 4.5
- * devices respond to only RESET and AWAKE cmd
- */
- mmc_poweroff_notify(host);
err = host->bus_ops->suspend(host);
}
mmc_do_release_host(host);
int mmc_register_host_class(void);
void mmc_unregister_host_class(void);
-
-#ifdef CONFIG_MMC_CLKGATE
-void mmc_host_clk_hold(struct mmc_host *host);
-void mmc_host_clk_release(struct mmc_host *host);
-unsigned int mmc_host_clk_rate(struct mmc_host *host);
-
-#else
-static inline void mmc_host_clk_hold(struct mmc_host *host)
-{
-}
-
-static inline void mmc_host_clk_release(struct mmc_host *host)
-{
-}
-
-static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
-{
- return host->ios.clock;
-}
-#endif
-
void mmc_host_deeper_disable(struct work_struct *work);
#endif
}
card->ext_csd.raw_hc_erase_gap_size =
- ext_csd[EXT_CSD_PARTITION_ATTRIBUTE];
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
card->ext_csd.raw_sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.raw_sec_erase_mult =
goto out;
/* only compare read only fields */
- err = (!(card->ext_csd.raw_partition_support ==
+ err = !((card->ext_csd.raw_partition_support ==
bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
(card->ext_csd.raw_erased_mem_count ==
bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
err = mmc_select_hs200(card);
else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_HS_TIMING, 1, 0);
+ EXT_CSD_HS_TIMING, 1,
+ card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
* Activate wide bus and DDR (if supported).
*/
if (!mmc_card_hs200(card) &&
- (card->csd.mmca_vsn >= CSD_SPEC_VER_3) &&
+ (card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
static unsigned ext_csd_bits[][2] = {
{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
BUG_ON(!host->card);
mmc_claim_host(host);
- if (mmc_card_can_sleep(host))
+ if (mmc_card_can_sleep(host)) {
err = mmc_card_sleep(host);
- else if (!mmc_host_is_spi(host))
+ if (!err)
+ mmc_card_set_sleep(host->card);
+ } else if (!mmc_host_is_spi(host))
mmc_deselect_cards(host);
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_release_host(host);
return err;
BUG_ON(!host->card);
mmc_claim_host(host);
- err = mmc_init_card(host, host->ocr, host->card);
+ if (mmc_card_is_sleep(host->card)) {
+ err = mmc_card_awake(host);
+ mmc_card_clr_sleep(host->card);
+ } else
+ err = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
return err;
{
int ret;
- host->card->state &= ~MMC_STATE_HIGHSPEED;
+ host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
+ mmc_card_clr_sleep(host->card);
mmc_claim_host(host);
ret = mmc_init_card(host, host->ocr, host->card);
mmc_release_host(host);
* information and let the hardware specific code
* return what is possible given the options
*/
+ mmc_host_clk_hold(card->host);
drive_strength = card->host->ops->select_drive_strength(
card->sw_caps.uhs_max_dtr,
host_drv_type, card_drv_type);
+ mmc_host_clk_release(card->host);
err = mmc_sd_switch(card, 1, 2, drive_strength, status);
if (err)
goto out;
/* SPI mode doesn't define CMD19 */
- if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
+ if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning) {
+ mmc_host_clk_hold(card->host);
err = card->host->ops->execute_tuning(card->host,
MMC_SEND_TUNING_BLOCK);
+ mmc_host_clk_release(card->host);
+ }
out:
kfree(status);
if (!reinit) {
int ro = -1;
- if (host->ops->get_ro)
+ if (host->ops->get_ro) {
+ mmc_host_clk_hold(card->host);
ro = host->ops->get_ro(host);
+ mmc_host_clk_release(card->host);
+ }
if (ro < 0) {
pr_warning("%s: host does not "
* Since initialization is now complete, enable preset
* value registers for UHS-I cards.
*/
- if (host->ops->enable_preset_value)
+ if (host->ops->enable_preset_value) {
+ mmc_host_clk_hold(card->host);
host->ops->enable_preset_value(host, true);
+ mmc_host_clk_release(card->host);
+ }
} else {
/*
* Attempt to change to high-speed (if supported)
return err;
/* Disable preset value enable if already set since last time */
- if (host->ops->enable_preset_value)
+ if (host->ops->enable_preset_value) {
+ mmc_host_clk_hold(host);
host->ops->enable_preset_value(host, false);
+ mmc_host_clk_release(host);
+ }
err = mmc_send_app_op_cond(host, 0, &ocr);
if (err)
return ret;
}
-static int sdio_read_cccr(struct mmc_card *card)
+static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
{
int ret;
int cccr_vsn;
+ int uhs = ocr & R4_18V_PRESENT;
unsigned char data;
unsigned char speed;
card->scr.sda_spec3 = 0;
card->sw_caps.sd3_bus_mode = 0;
card->sw_caps.sd3_drv_type = 0;
- if (cccr_vsn >= SDIO_CCCR_REV_3_00) {
+ if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
card->scr.sda_spec3 = 1;
ret = mmc_io_rw_direct(card, 0, 0,
SDIO_CCCR_UHS, 0, &data);
/*
* Read the common registers.
*/
- err = sdio_read_cccr(card);
+ err = sdio_read_cccr(card, ocr);
if (err)
goto remove;
}
set_current_state(TASK_INTERRUPTIBLE);
- if (host->caps & MMC_CAP_SDIO_IRQ)
+ if (host->caps & MMC_CAP_SDIO_IRQ) {
+ mmc_host_clk_hold(host);
host->ops->enable_sdio_irq(host, 1);
+ mmc_host_clk_release(host);
+ }
if (!kthread_should_stop())
schedule_timeout(period);
set_current_state(TASK_RUNNING);
} while (!kthread_should_stop());
- if (host->caps & MMC_CAP_SDIO_IRQ)
+ if (host->caps & MMC_CAP_SDIO_IRQ) {
+ mmc_host_clk_hold(host);
host->ops->enable_sdio_irq(host, 0);
+ mmc_host_clk_release(host);
+ }
pr_debug("%s: IRQ thread exiting with code %d\n",
mmc_hostname(host), ret);
host->data_status = 0;
if (host->need_reset) {
+ iflags = atmci_readl(host, ATMCI_IMR);
+ iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
atmci_writel(host, ATMCI_MR, host->mode_reg);
if (host->caps.has_cfg_reg)
atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_IER, iflags);
host->need_reset = false;
}
atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/scatterlist.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/stat.h>
host->dir_status = DW_MCI_SEND_STATUS;
if (dw_mci_submit_data_dma(host, data)) {
+ int flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
host->sg = data->sg;
- host->pio_offset = 0;
host->part_buf_start = 0;
host->part_buf_count = 0;
* generates a block interrupt, hence setting
* the scatter-gather pointer to NULL.
*/
+ sg_miter_stop(&host->sg_miter);
host->sg = NULL;
ctrl = mci_readl(host, CTRL);
ctrl |= SDMMC_CTRL_FIFO_RESET;
static void dw_mci_read_data_pio(struct dw_mci *host)
{
- struct scatterlist *sg = host->sg;
- void *buf = sg_virt(sg);
- unsigned int offset = host->pio_offset;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ void *buf;
+ unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int nbytes = 0, len;
+ unsigned int remain, fcnt;
do {
- len = host->part_buf_count +
- (SDMMC_GET_FCNT(mci_readl(host, STATUS)) << shift);
- if (offset + len <= sg->length) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+
+ host->sg = sg_miter->__sg;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ offset = 0;
+
+ do {
+ fcnt = (SDMMC_GET_FCNT(mci_readl(host, STATUS))
+ << shift) + host->part_buf_count;
+ len = min(remain, fcnt);
+ if (!len)
+ break;
dw_mci_pull_data(host, (void *)(buf + offset), len);
-
offset += len;
nbytes += len;
-
- if (offset == sg->length) {
- flush_dcache_page(sg_page(sg));
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = 0;
- buf = sg_virt(sg);
- }
- } else {
- unsigned int remaining = sg->length - offset;
- dw_mci_pull_data(host, (void *)(buf + offset),
- remaining);
- nbytes += remaining;
-
- flush_dcache_page(sg_page(sg));
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = len - remaining;
- buf = sg_virt(sg);
- dw_mci_pull_data(host, buf, offset);
- nbytes += offset;
- }
+ remain -= len;
+ } while (remain);
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
if (status & DW_MCI_DATA_ERROR_FLAGS) {
host->data_status = status;
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_DATA_ERROR, &host->pending_events);
return;
}
} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
- host->pio_offset = offset;
data->bytes_xfered += nbytes;
+
+ if (!remain) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ sg_miter->consumed = 0;
+ }
+ sg_miter_stop(sg_miter);
return;
done:
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
static void dw_mci_write_data_pio(struct dw_mci *host)
{
- struct scatterlist *sg = host->sg;
- void *buf = sg_virt(sg);
- unsigned int offset = host->pio_offset;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ void *buf;
+ unsigned int offset;
struct mmc_data *data = host->data;
int shift = host->data_shift;
u32 status;
unsigned int nbytes = 0, len;
+ unsigned int fifo_depth = host->fifo_depth;
+ unsigned int remain, fcnt;
do {
- len = ((host->fifo_depth -
- SDMMC_GET_FCNT(mci_readl(host, STATUS))) << shift)
- - host->part_buf_count;
- if (offset + len <= sg->length) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+
+ host->sg = sg_miter->__sg;
+ buf = sg_miter->addr;
+ remain = sg_miter->length;
+ offset = 0;
+
+ do {
+ fcnt = ((fifo_depth -
+ SDMMC_GET_FCNT(mci_readl(host, STATUS)))
+ << shift) - host->part_buf_count;
+ len = min(remain, fcnt);
+ if (!len)
+ break;
host->push_data(host, (void *)(buf + offset), len);
-
offset += len;
nbytes += len;
- if (offset == sg->length) {
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = 0;
- buf = sg_virt(sg);
- }
- } else {
- unsigned int remaining = sg->length - offset;
-
- host->push_data(host, (void *)(buf + offset),
- remaining);
- nbytes += remaining;
-
- host->sg = sg = sg_next(sg);
- if (!sg)
- goto done;
-
- offset = len - remaining;
- buf = sg_virt(sg);
- host->push_data(host, (void *)buf, offset);
- nbytes += offset;
- }
+ remain -= len;
+ } while (remain);
+ sg_miter->consumed = offset;
status = mci_readl(host, MINTSTS);
mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
if (status & DW_MCI_DATA_ERROR_FLAGS) {
host->data_status = status;
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
return;
}
} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
- host->pio_offset = offset;
data->bytes_xfered += nbytes;
+
+ if (!remain) {
+ if (!sg_miter_next(sg_miter))
+ goto done;
+ sg_miter->consumed = 0;
+ }
+ sg_miter_stop(sg_miter);
return;
done:
data->bytes_xfered += nbytes;
+ sg_miter_stop(sg_miter);
+ host->sg = NULL;
smp_wmb();
set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
}
* block interrupt, hence setting the
* scatter-gather pointer to NULL.
*/
+ sg_miter_stop(&host->sg_miter);
host->sg = NULL;
ctrl = mci_readl(host, CTRL);
const int j = i * 2;
u32 mask;
- mask = mmc_vddrange_to_ocrmask(voltage_ranges[j],
- voltage_ranges[j + 1]);
+ mask = mmc_vddrange_to_ocrmask(be32_to_cpu(voltage_ranges[j]),
+ be32_to_cpu(voltage_ranges[j + 1]));
if (!mask) {
ret = -EINVAL;
dev_err(dev, "OF: voltage-range #%d is invalid\n", i);
int base = reg & ~0x3;
int shift = (reg & 0x3) * 8;
u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
+
+ /*
+ * "DMA select" locates at offset 0x28 in SD specification, but on
+ * P5020 or P3041, it locates at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ dma_bits = in_be32(host->ioaddr + reg);
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
+
+ /* fixup the result */
+ ret &= ~SDHCI_CTRL_DMA_MASK;
+ ret |= dma_bits;
+ }
+
return ret;
}
static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
{
+ /*
+ * "DMA select" location is offset 0x28 in SD specification, but on
+ * P5020 or P3041, it's located at 0x29.
+ */
+ if (reg == SDHCI_HOST_CONTROL) {
+ u32 dma_bits;
+
+ /* DMA select is 22,23 bits in Protocol Control Register */
+ dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
+ clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
+ dma_bits);
+ val &= ~SDHCI_CTRL_DMA_MASK;
+ val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
+ }
+
/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
if (reg == SDHCI_HOST_CONTROL)
val &= ~ESDHC_HOST_CONTROL_RES;
static int mfd_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD;
+ slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE;
return 0;
}
* sdhci-pltfm.c Support for SDHCI platform devices
* Copyright (c) 2009 Intel Corporation
*
- * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2007, 2011 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
*
* Authors: Xiaobo Xie <X.Xie@freescale.com>
if (sdhci_of_wp_inverted(np))
host->quirks |= SDHCI_QUIRK_INVERTED_WRITE_PROTECT;
+ if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+ if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
+ of_device_is_compatible(np, "fsl,p1010-esdhc") ||
+ of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
+ host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
clk = of_get_property(np, "clock-frequency", &size);
if (clk && size == sizeof(*clk) && *clk)
pltfm_host->clock = be32_to_cpup(clk);
if (ret < 0)
goto clean_up2;
- mmc_add_host(mmc);
+ INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
}
ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt, 0, "sh_mmc:int", host);
if (ret) {
- free_irq(irq[0], host);
dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
- goto clean_up3;
+ goto clean_up4;
}
- INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work);
-
- mmc_detect_change(host->mmc, 0);
+ ret = mmc_add_host(mmc);
+ if (ret < 0)
+ goto clean_up5;
dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION);
dev_dbg(&pdev->dev, "chip ver H'%04x\n",
sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
return ret;
+clean_up5:
+ free_irq(irq[1], host);
+clean_up4:
+ free_irq(irq[0], host);
clean_up3:
- mmc_remove_host(mmc);
pm_runtime_suspend(&pdev->dev);
clean_up2:
pm_runtime_disable(&pdev->dev);
#include <linux/mmc/tmio.h>
#include <linux/mutex.h>
#include <linux/pagemap.h>
-#include <linux/spinlock.h>
#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
/* Definitions for values the CTRL_SDIO_STATUS register can take. */
#define TMIO_SDIO_STAT_IOIRQ 0x0001
void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable);
void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdata);
void tmio_mmc_release_dma(struct tmio_mmc_host *host);
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host);
#else
static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host,
struct mmc_data *data)
static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host)
{
}
+
+static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+}
#endif
#ifdef CONFIG_PM
#endif
}
+void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
+{
+ tmio_mmc_enable_dma(host, false);
+
+ if (host->chan_rx)
+ dmaengine_terminate_all(host->chan_rx);
+ if (host->chan_tx)
+ dmaengine_terminate_all(host->chan_tx);
+
+ tmio_mmc_enable_dma(host, true);
+}
+
static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host)
{
struct scatterlist *sg = host->sg_ptr, *sg_tmp;
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
-#include <linux/workqueue.h>
#include <linux/spinlock.h>
+#include <linux/workqueue.h>
#include "tmio_mmc.h"
/* Ready for new calls */
host->mrq = NULL;
+ tmio_mmc_abort_dma(host);
mmc_request_done(host->mmc, mrq);
}
host->mrq = NULL;
spin_unlock_irqrestore(&host->lock, flags);
+ if (mrq->cmd->error || (mrq->data && mrq->data->error))
+ tmio_mmc_abort_dma(host);
+
mmc_request_done(host->mmc, mrq);
}
return rc;
}
- pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz);
-
iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE;
pci_cfg_access_lock(dev);
pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
return -EIO;
pgsz &= ~(pgsz - 1);
+ pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz);
nres = 0;
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
secondary, subordinate, pass);
+ if (!primary && (primary != bus->number) && secondary && subordinate) {
+ dev_warn(&dev->dev, "Primary bus is hard wired to 0\n");
+ primary = bus->number;
+ }
+
/* Check if setup is sensible at all */
if (!pass &&
(primary != bus->number || secondary <= bus->number)) {
}
EXPORT_SYMBOL(pci_remove_bus);
+static void __pci_remove_behind_bridge(struct pci_dev *dev);
/**
* pci_remove_bus_device - remove a PCI device and any children
* @dev: the device to remove
if (dev->subordinate) {
struct pci_bus *b = dev->subordinate;
- pci_remove_behind_bridge(dev);
+ __pci_remove_behind_bridge(dev);
pci_remove_bus(b);
dev->subordinate = NULL;
}
__pci_remove_bus_device(dev);
}
+static void __pci_remove_behind_bridge(struct pci_dev *dev)
+{
+ struct list_head *l, *n;
+
+ if (dev->subordinate)
+ list_for_each_safe(l, n, &dev->subordinate->devices)
+ __pci_remove_bus_device(pci_dev_b(l));
+}
+
+static void pci_stop_behind_bridge(struct pci_dev *dev)
+{
+ struct list_head *l, *n;
+
+ if (dev->subordinate)
+ list_for_each_safe(l, n, &dev->subordinate->devices)
+ pci_stop_bus_device(pci_dev_b(l));
+}
+
/**
* pci_remove_behind_bridge - remove all devices behind a PCI bridge
* @dev: PCI bridge device
*/
void pci_remove_behind_bridge(struct pci_dev *dev)
{
- struct list_head *l, *n;
-
- if (dev->subordinate)
- list_for_each_safe(l, n, &dev->subordinate->devices)
- __pci_remove_bus_device(pci_dev_b(l));
+ pci_stop_behind_bridge(dev);
+ __pci_remove_behind_bridge(dev);
}
static void pci_stop_bus_devices(struct pci_bus *bus)
if (verbose_request)
dev_info(&pdev->xdev->dev,
- "read dev=%04x:%02x:%02x.%01x - offset %x size %d\n",
+ "read dev=%04x:%02x:%02x.%d - offset %x size %d\n",
pci_domain_nr(bus), bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), where, size);
if (verbose_request)
dev_info(&pdev->xdev->dev,
- "write dev=%04x:%02x:%02x.%01x - "
+ "write dev=%04x:%02x:%02x.%d - "
"offset %x size %d val %x\n",
pci_domain_nr(bus), bus->number,
PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val);
d = pci_scan_single_device(b, devfn);
if (d)
dev_info(&pdev->xdev->dev, "New device on "
- "%04x:%02x:%02x.%02x found.\n", domain, bus,
+ "%04x:%02x:%02x.%d found.\n", domain, bus,
PCI_SLOT(devfn), PCI_FUNC(devfn));
}
pci_dev = pci_get_slot(pci_bus, PCI_DEVFN(slot, func));
if (!pci_dev) {
dev_dbg(&pdev->xdev->dev,
- "Cannot get PCI device %04x:%02x:%02x.%02x\n",
+ "Cannot get PCI device %04x:%02x:%02x.%d\n",
domain, bus, slot, func);
continue;
}
pci_dev_put(pci_dev);
dev_dbg(&pdev->xdev->dev,
- "PCI device %04x:%02x:%02x.%02x removed.\n",
+ "PCI device %04x:%02x:%02x.%d removed.\n",
domain, bus, slot, func);
}
#define BQ27500_REG_SOC 0x2C
#define BQ27500_REG_DCAP 0x3C /* Design capacity */
-#define BQ27500_FLAG_DSG BIT(0) /* Discharging */
+#define BQ27500_FLAG_DSC BIT(0)
#define BQ27500_FLAG_SOCF BIT(1) /* State-of-Charge threshold final */
#define BQ27500_FLAG_SOC1 BIT(2) /* State-of-Charge threshold 1 */
-#define BQ27500_FLAG_CHG BIT(8) /* Charging */
-#define BQ27500_FLAG_FC BIT(9) /* Fully charged */
+#define BQ27500_FLAG_FC BIT(9)
#define BQ27000_RS 20 /* Resistor sense */
struct bq27x00_reg_cache cache = {0, };
bool is_bq27500 = di->chip == BQ27500;
- cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, is_bq27500);
+ cache.flags = bq27x00_read(di, BQ27x00_REG_FLAGS, !is_bq27500);
if (cache.flags >= 0) {
if (!is_bq27500 && (cache.flags & BQ27000_FLAG_CI)) {
dev_info(di->dev, "battery is not calibrated! ignoring capacity values\n");
if (di->chip == BQ27500) {
if (di->cache.flags & BQ27500_FLAG_FC)
status = POWER_SUPPLY_STATUS_FULL;
- else if (di->cache.flags & BQ27500_FLAG_DSG)
+ else if (di->cache.flags & BQ27500_FLAG_DSC)
status = POWER_SUPPLY_STATUS_DISCHARGING;
- else if (di->cache.flags & BQ27500_FLAG_CHG)
- status = POWER_SUPPLY_STATUS_CHARGING;
- else if (power_supply_am_i_supplied(&di->bat))
- status = POWER_SUPPLY_STATUS_NOT_CHARGING;
else
- status = POWER_SUPPLY_STATUS_UNKNOWN;
+ status = POWER_SUPPLY_STATUS_CHARGING;
} else {
if (di->cache.flags & BQ27000_FLAG_FC)
status = POWER_SUPPLY_STATUS_FULL;
return 0;
}
-const struct platform_device_id charger_manager_id[] = {
+static const struct platform_device_id charger_manager_id[] = {
{ "charger-manager", 0 },
{ },
};
+MODULE_DEVICE_TABLE(platform, charger_manager_id);
static int cm_suspend_prepare(struct device *dev)
{
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
MODULE_DESCRIPTION("Charger Manager");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("charger-manager");
static const struct i2c_device_id lp8727_ids[] = {
{"lp8727", 0},
+ { }
};
static struct i2c_driver lp8727_driver = {
if (ret != 0)
return ret;
val &= MAX8649_VOL_MASK;
- voltage = max8649_list_voltage(rdev, (unsigned char)ret); /* uV */
+ voltage = max8649_list_voltage(rdev, (unsigned char)val); /* uV */
/* get rate */
ret = regmap_read(info->regmap, MAX8649_RAMP, &val);
return num;
}
+EXPORT_SYMBOL_GPL(mc13xxx_get_num_regulators_dt);
struct mc13xxx_regulator_init_data * __devinit mc13xxx_parse_regulators_dt(
struct platform_device *pdev, struct mc13xxx_regulator *regulators,
return data;
}
+EXPORT_SYMBOL_GPL(mc13xxx_parse_regulators_dt);
#endif
MODULE_LICENSE("GPL v2");
{
int r;
+ if (cpu_is_omap34xx() && !dpi.vdds_dsi_reg) {
+ DSSERR("no VDSS_DSI regulator\n");
+ return -ENODEV;
+ }
+
if (dssdev->manager == NULL) {
DSSERR("failed to enable display: no manager\n");
return -ENODEV;
sprintf(dir, "cpu/%u", cpu);
err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
if (err != 1) {
- printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
+ if (!xen_initial_domain())
+ printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
return err;
}
int err;
err =
- sscanf(buf, " %04x:%02x:%02x.%1x-%08x:%1x:%08x", domain, bus, slot,
+ sscanf(buf, " %04x:%02x:%02x.%d-%08x:%1x:%08x", domain, bus, slot,
func, reg, size, mask);
if (err == 7)
return 0;
pci_dev_id->bus = bus;
pci_dev_id->devfn = PCI_DEVFN(slot, func);
- pr_debug(DRV_NAME ": wants to seize %04x:%02x:%02x.%01x\n",
+ pr_debug(DRV_NAME ": wants to seize %04x:%02x:%02x.%d\n",
domain, bus, slot, func);
spin_lock_irqsave(&device_ids_lock, flags);
err = 0;
- pr_debug(DRV_NAME ": removed %04x:%02x:%02x.%01x from "
+ pr_debug(DRV_NAME ": removed %04x:%02x:%02x.%d from "
"seize list\n", domain, bus, slot, func);
}
}
break;
count += scnprintf(buf + count, PAGE_SIZE - count,
- "%04x:%02x:%02x.%01x\n",
+ "%04x:%02x:%02x.%d\n",
pci_dev_id->domain, pci_dev_id->bus,
PCI_SLOT(pci_dev_id->devfn),
PCI_FUNC(pci_dev_id->devfn));
goto out;
}
+ /* Note: The PV protocol uses %02x, don't change it */
err = xenbus_printf(XBT_NIL, pdev->xdev->nodename, str,
"%04x:%02x:%02x.%02x", domain, bus,
PCI_SLOT(devfn), PCI_FUNC(devfn));
err = -EINVAL;
xenbus_dev_fatal(pdev->xdev, err,
"Couldn't locate PCI device "
- "(%04x:%02x:%02x.%01x)! "
+ "(%04x:%02x:%02x.%d)! "
"perhaps already in-use?",
domain, bus, slot, func);
goto out;
if (!dev) {
err = -EINVAL;
dev_dbg(&pdev->xdev->dev, "Couldn't locate PCI device "
- "(%04x:%02x:%02x.%01x)! not owned by this domain\n",
+ "(%04x:%02x:%02x.%d)! not owned by this domain\n",
domain, bus, slot, func);
goto out;
}
goto out;
}
token++;
+ if (memchr(token, 0, u->u.msg.len - (token - path)) == NULL) {
+ rc = -EILSEQ;
+ goto out;
+ }
if (msg_type == XS_WATCH) {
watch = alloc_watch_adapter(path, token);
cifs_dump_mem("Bad SMB: ", buf,
min_t(unsigned int, server->total_read, 48));
- if (mid)
- handle_mid(mid, server, smb_buffer, length);
+ if (!mid)
+ return length;
- return length;
+ handle_mid(mid, server, smb_buffer, length);
+ return 0;
}
static int
down_read(&key->sem);
upayload = key->payload.data;
if (IS_ERR_OR_NULL(upayload)) {
- rc = PTR_ERR(key);
+ rc = upayload ? PTR_ERR(upayload) : -EINVAL;
goto out_key_put;
}
{
int xid;
int rc = 0; /* to get around spurious gcc warning, set to zero here */
- __u32 oplock = 0;
+ __u32 oplock = enable_oplocks ? REQ_OPLOCK : 0;
__u16 fileHandle = 0;
bool posix_open = false;
struct cifs_sb_info *cifs_sb;
extern void *kmem_zone_alloc(kmem_zone_t *, unsigned int __nocast);
extern void *kmem_zone_zalloc(kmem_zone_t *, unsigned int __nocast);
-static inline int
-kmem_shake_allow(gfp_t gfp_mask)
-{
- return ((gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS));
-}
-
#endif /* __XFS_SUPPORT_KMEM_H__ */
static struct lock_class_key xfs_dquot_other_class;
-/*
- * Allocate and initialize a dquot. We don't always allocate fresh memory;
- * we try to reclaim a free dquot if the number of incore dquots are above
- * a threshold.
- * The only field inside the core that gets initialized at this point
- * is the d_id field. The idea is to fill in the entire q_core
- * when we read in the on disk dquot.
- */
-STATIC xfs_dquot_t *
-xfs_qm_dqinit(
- xfs_mount_t *mp,
- xfs_dqid_t id,
- uint type)
-{
- xfs_dquot_t *dqp;
- boolean_t brandnewdquot;
-
- brandnewdquot = xfs_qm_dqalloc_incore(&dqp);
- dqp->dq_flags = type;
- dqp->q_core.d_id = cpu_to_be32(id);
- dqp->q_mount = mp;
-
- /*
- * No need to re-initialize these if this is a reclaimed dquot.
- */
- if (brandnewdquot) {
- INIT_LIST_HEAD(&dqp->q_freelist);
- mutex_init(&dqp->q_qlock);
- init_waitqueue_head(&dqp->q_pinwait);
-
- /*
- * Because we want to use a counting completion, complete
- * the flush completion once to allow a single access to
- * the flush completion without blocking.
- */
- init_completion(&dqp->q_flush);
- complete(&dqp->q_flush);
-
- trace_xfs_dqinit(dqp);
- } else {
- /*
- * Only the q_core portion was zeroed in dqreclaim_one().
- * So, we need to reset others.
- */
- dqp->q_nrefs = 0;
- dqp->q_blkno = 0;
- INIT_LIST_HEAD(&dqp->q_mplist);
- INIT_LIST_HEAD(&dqp->q_hashlist);
- dqp->q_bufoffset = 0;
- dqp->q_fileoffset = 0;
- dqp->q_transp = NULL;
- dqp->q_gdquot = NULL;
- dqp->q_res_bcount = 0;
- dqp->q_res_icount = 0;
- dqp->q_res_rtbcount = 0;
- atomic_set(&dqp->q_pincount, 0);
- dqp->q_hash = NULL;
- ASSERT(list_empty(&dqp->q_freelist));
-
- trace_xfs_dqreuse(dqp);
- }
-
- /*
- * In either case we need to make sure group quotas have a different
- * lock class than user quotas, to make sure lockdep knows we can
- * locks of one of each at the same time.
- */
- if (!(type & XFS_DQ_USER))
- lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class);
-
- /*
- * log item gets initialized later
- */
- return (dqp);
-}
-
/*
* This is called to free all the memory associated with a dquot
*/
int error;
int cancelflags = 0;
- dqp = xfs_qm_dqinit(mp, id, type);
+
+ dqp = kmem_zone_zalloc(xfs_Gqm->qm_dqzone, KM_SLEEP);
+
+ dqp->dq_flags = type;
+ dqp->q_core.d_id = cpu_to_be32(id);
+ dqp->q_mount = mp;
+ INIT_LIST_HEAD(&dqp->q_freelist);
+ mutex_init(&dqp->q_qlock);
+ init_waitqueue_head(&dqp->q_pinwait);
+
+ /*
+ * Because we want to use a counting completion, complete
+ * the flush completion once to allow a single access to
+ * the flush completion without blocking.
+ */
+ init_completion(&dqp->q_flush);
+ complete(&dqp->q_flush);
+
+ /*
+ * Make sure group quotas have a different lock class than user
+ * quotas.
+ */
+ if (!(type & XFS_DQ_USER))
+ lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class);
+
+ atomic_inc(&xfs_Gqm->qm_totaldquots);
trace_xfs_dqread(dqp);
old_ptr = item->ri_buf[item->ri_cnt-1].i_addr;
old_len = item->ri_buf[item->ri_cnt-1].i_len;
- ptr = kmem_realloc(old_ptr, len+old_len, old_len, 0u);
+ ptr = kmem_realloc(old_ptr, len+old_len, old_len, KM_SLEEP);
memcpy(&ptr[old_len], dp, len); /* d, s, l */
item->ri_buf[item->ri_cnt-1].i_len += len;
item->ri_buf[item->ri_cnt-1].i_addr = ptr;
*/
struct mutex xfs_Gqm_lock;
struct xfs_qm *xfs_Gqm;
-uint ndquot;
kmem_zone_t *qm_dqzone;
kmem_zone_t *qm_dqtrxzone;
goto out_free_udqhash;
hsize /= sizeof(xfs_dqhash_t);
- ndquot = hsize << 8;
xqm = kmem_zalloc(sizeof(xfs_qm_t), KM_SLEEP);
xqm->qm_dqhashmask = hsize - 1;
xqm->qm_dqtrxzone = qm_dqtrxzone;
atomic_set(&xqm->qm_totaldquots, 0);
- xqm->qm_dqfree_ratio = XFS_QM_DQFREE_RATIO;
xqm->qm_nrefs = 0;
return xqm;
return 0;
}
+STATIC void
+xfs_qm_dqfree_one(
+ struct xfs_dquot *dqp)
+{
+ struct xfs_mount *mp = dqp->q_mount;
+ struct xfs_quotainfo *qi = mp->m_quotainfo;
+ mutex_lock(&dqp->q_hash->qh_lock);
+ list_del_init(&dqp->q_hashlist);
+ dqp->q_hash->qh_version++;
+ mutex_unlock(&dqp->q_hash->qh_lock);
-/*
- * Pop the least recently used dquot off the freelist and recycle it.
- */
-STATIC struct xfs_dquot *
-xfs_qm_dqreclaim_one(void)
+ mutex_lock(&qi->qi_dqlist_lock);
+ list_del_init(&dqp->q_mplist);
+ qi->qi_dquots--;
+ qi->qi_dqreclaims++;
+ mutex_unlock(&qi->qi_dqlist_lock);
+
+ xfs_qm_dqdestroy(dqp);
+}
+
+STATIC void
+xfs_qm_dqreclaim_one(
+ struct xfs_dquot *dqp,
+ struct list_head *dispose_list)
{
- struct xfs_dquot *dqp;
- int restarts = 0;
+ struct xfs_mount *mp = dqp->q_mount;
+ int error;
- mutex_lock(&xfs_Gqm->qm_dqfrlist_lock);
-restart:
- list_for_each_entry(dqp, &xfs_Gqm->qm_dqfrlist, q_freelist) {
- struct xfs_mount *mp = dqp->q_mount;
+ if (!xfs_dqlock_nowait(dqp))
+ goto out_busy;
- if (!xfs_dqlock_nowait(dqp))
- continue;
+ /*
+ * This dquot has acquired a reference in the meantime remove it from
+ * the freelist and try again.
+ */
+ if (dqp->q_nrefs) {
+ xfs_dqunlock(dqp);
- /*
- * This dquot has already been grabbed by dqlookup.
- * Remove it from the freelist and try again.
- */
- if (dqp->q_nrefs) {
- trace_xfs_dqreclaim_want(dqp);
- XQM_STATS_INC(xqmstats.xs_qm_dqwants);
-
- list_del_init(&dqp->q_freelist);
- xfs_Gqm->qm_dqfrlist_cnt--;
- restarts++;
- goto dqunlock;
- }
+ trace_xfs_dqreclaim_want(dqp);
+ XQM_STATS_INC(xqmstats.xs_qm_dqwants);
- ASSERT(dqp->q_hash);
- ASSERT(!list_empty(&dqp->q_mplist));
+ list_del_init(&dqp->q_freelist);
+ xfs_Gqm->qm_dqfrlist_cnt--;
+ return;
+ }
- /*
- * Try to grab the flush lock. If this dquot is in the process
- * of getting flushed to disk, we don't want to reclaim it.
- */
- if (!xfs_dqflock_nowait(dqp))
- goto dqunlock;
+ ASSERT(dqp->q_hash);
+ ASSERT(!list_empty(&dqp->q_mplist));
- /*
- * We have the flush lock so we know that this is not in the
- * process of being flushed. So, if this is dirty, flush it
- * DELWRI so that we don't get a freelist infested with
- * dirty dquots.
- */
- if (XFS_DQ_IS_DIRTY(dqp)) {
- int error;
+ /*
+ * Try to grab the flush lock. If this dquot is in the process of
+ * getting flushed to disk, we don't want to reclaim it.
+ */
+ if (!xfs_dqflock_nowait(dqp))
+ goto out_busy;
- trace_xfs_dqreclaim_dirty(dqp);
+ /*
+ * We have the flush lock so we know that this is not in the
+ * process of being flushed. So, if this is dirty, flush it
+ * DELWRI so that we don't get a freelist infested with
+ * dirty dquots.
+ */
+ if (XFS_DQ_IS_DIRTY(dqp)) {
+ trace_xfs_dqreclaim_dirty(dqp);
- /*
- * We flush it delayed write, so don't bother
- * releasing the freelist lock.
- */
- error = xfs_qm_dqflush(dqp, SYNC_TRYLOCK);
- if (error) {
- xfs_warn(mp, "%s: dquot %p flush failed",
- __func__, dqp);
- }
- goto dqunlock;
+ /*
+ * We flush it delayed write, so don't bother releasing the
+ * freelist lock.
+ */
+ error = xfs_qm_dqflush(dqp, 0);
+ if (error) {
+ xfs_warn(mp, "%s: dquot %p flush failed",
+ __func__, dqp);
}
- xfs_dqfunlock(dqp);
/*
- * Prevent lookup now that we are going to reclaim the dquot.
- * Once XFS_DQ_FREEING is set lookup won't touch the dquot,
- * thus we can drop the lock now.
+ * Give the dquot another try on the freelist, as the
+ * flushing will take some time.
*/
- dqp->dq_flags |= XFS_DQ_FREEING;
- xfs_dqunlock(dqp);
-
- mutex_lock(&dqp->q_hash->qh_lock);
- list_del_init(&dqp->q_hashlist);
- dqp->q_hash->qh_version++;
- mutex_unlock(&dqp->q_hash->qh_lock);
-
- mutex_lock(&mp->m_quotainfo->qi_dqlist_lock);
- list_del_init(&dqp->q_mplist);
- mp->m_quotainfo->qi_dquots--;
- mp->m_quotainfo->qi_dqreclaims++;
- mutex_unlock(&mp->m_quotainfo->qi_dqlist_lock);
+ goto out_busy;
+ }
+ xfs_dqfunlock(dqp);
- ASSERT(dqp->q_nrefs == 0);
- list_del_init(&dqp->q_freelist);
- xfs_Gqm->qm_dqfrlist_cnt--;
+ /*
+ * Prevent lookups now that we are past the point of no return.
+ */
+ dqp->dq_flags |= XFS_DQ_FREEING;
+ xfs_dqunlock(dqp);
- mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock);
- return dqp;
-dqunlock:
- xfs_dqunlock(dqp);
- if (restarts >= XFS_QM_RECLAIM_MAX_RESTARTS)
- break;
- goto restart;
- }
+ ASSERT(dqp->q_nrefs == 0);
+ list_move_tail(&dqp->q_freelist, dispose_list);
+ xfs_Gqm->qm_dqfrlist_cnt--;
- mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock);
- return NULL;
-}
+ trace_xfs_dqreclaim_done(dqp);
+ XQM_STATS_INC(xqmstats.xs_qm_dqreclaims);
+ return;
-/*
- * Traverse the freelist of dquots and attempt to reclaim a maximum of
- * 'howmany' dquots. This operation races with dqlookup(), and attempts to
- * favor the lookup function ...
- */
-STATIC int
-xfs_qm_shake_freelist(
- int howmany)
-{
- int nreclaimed = 0;
- xfs_dquot_t *dqp;
+out_busy:
+ xfs_dqunlock(dqp);
- if (howmany <= 0)
- return 0;
+ /*
+ * Move the dquot to the tail of the list so that we don't spin on it.
+ */
+ list_move_tail(&dqp->q_freelist, &xfs_Gqm->qm_dqfrlist);
- while (nreclaimed < howmany) {
- dqp = xfs_qm_dqreclaim_one();
- if (!dqp)
- return nreclaimed;
- xfs_qm_dqdestroy(dqp);
- nreclaimed++;
- }
- return nreclaimed;
+ trace_xfs_dqreclaim_busy(dqp);
+ XQM_STATS_INC(xqmstats.xs_qm_dqreclaim_misses);
}
-/*
- * The kmem_shake interface is invoked when memory is running low.
- */
-/* ARGSUSED */
STATIC int
xfs_qm_shake(
- struct shrinker *shrink,
- struct shrink_control *sc)
+ struct shrinker *shrink,
+ struct shrink_control *sc)
{
- int ndqused, nfree, n;
- gfp_t gfp_mask = sc->gfp_mask;
-
- if (!kmem_shake_allow(gfp_mask))
- return 0;
- if (!xfs_Gqm)
- return 0;
-
- nfree = xfs_Gqm->qm_dqfrlist_cnt; /* free dquots */
- /* incore dquots in all f/s's */
- ndqused = atomic_read(&xfs_Gqm->qm_totaldquots) - nfree;
-
- ASSERT(ndqused >= 0);
+ int nr_to_scan = sc->nr_to_scan;
+ LIST_HEAD (dispose_list);
+ struct xfs_dquot *dqp;
- if (nfree <= ndqused && nfree < ndquot)
+ if ((sc->gfp_mask & (__GFP_FS|__GFP_WAIT)) != (__GFP_FS|__GFP_WAIT))
return 0;
+ if (!nr_to_scan)
+ goto out;
- ndqused *= xfs_Gqm->qm_dqfree_ratio; /* target # of free dquots */
- n = nfree - ndqused - ndquot; /* # over target */
-
- return xfs_qm_shake_freelist(MAX(nfree, n));
-}
-
-
-/*------------------------------------------------------------------*/
-
-/*
- * Return a new incore dquot. Depending on the number of
- * dquots in the system, we either allocate a new one on the kernel heap,
- * or reclaim a free one.
- * Return value is B_TRUE if we allocated a new dquot, B_FALSE if we managed
- * to reclaim an existing one from the freelist.
- */
-boolean_t
-xfs_qm_dqalloc_incore(
- xfs_dquot_t **O_dqpp)
-{
- xfs_dquot_t *dqp;
-
- /*
- * Check against high water mark to see if we want to pop
- * a nincompoop dquot off the freelist.
- */
- if (atomic_read(&xfs_Gqm->qm_totaldquots) >= ndquot) {
- /*
- * Try to recycle a dquot from the freelist.
- */
- if ((dqp = xfs_qm_dqreclaim_one())) {
- XQM_STATS_INC(xqmstats.xs_qm_dqreclaims);
- /*
- * Just zero the core here. The rest will get
- * reinitialized by caller. XXX we shouldn't even
- * do this zero ...
- */
- memset(&dqp->q_core, 0, sizeof(dqp->q_core));
- *O_dqpp = dqp;
- return B_FALSE;
- }
- XQM_STATS_INC(xqmstats.xs_qm_dqreclaim_misses);
+ mutex_lock(&xfs_Gqm->qm_dqfrlist_lock);
+ while (!list_empty(&xfs_Gqm->qm_dqfrlist)) {
+ if (nr_to_scan-- <= 0)
+ break;
+ dqp = list_first_entry(&xfs_Gqm->qm_dqfrlist, struct xfs_dquot,
+ q_freelist);
+ xfs_qm_dqreclaim_one(dqp, &dispose_list);
}
+ mutex_unlock(&xfs_Gqm->qm_dqfrlist_lock);
- /*
- * Allocate a brand new dquot on the kernel heap and return it
- * to the caller to initialize.
- */
- ASSERT(xfs_Gqm->qm_dqzone != NULL);
- *O_dqpp = kmem_zone_zalloc(xfs_Gqm->qm_dqzone, KM_SLEEP);
- atomic_inc(&xfs_Gqm->qm_totaldquots);
-
- return B_TRUE;
+ while (!list_empty(&dispose_list)) {
+ dqp = list_first_entry(&dispose_list, struct xfs_dquot,
+ q_freelist);
+ list_del_init(&dqp->q_freelist);
+ xfs_qm_dqfree_one(dqp);
+ }
+out:
+ return (xfs_Gqm->qm_dqfrlist_cnt / 100) * sysctl_vfs_cache_pressure;
}
-
/*
* Start a transaction and write the incore superblock changes to
* disk. flags parameter indicates which fields have changed.
struct xfs_qm;
struct xfs_inode;
-extern uint ndquot;
extern struct mutex xfs_Gqm_lock;
extern struct xfs_qm *xfs_Gqm;
extern kmem_zone_t *qm_dqzone;
extern kmem_zone_t *qm_dqtrxzone;
-/*
- * Ditto, for xfs_qm_dqreclaim_one.
- */
-#define XFS_QM_RECLAIM_MAX_RESTARTS 4
-
-/*
- * Ideal ratio of free to in use dquots. Quota manager makes an attempt
- * to keep this balance.
- */
-#define XFS_QM_DQFREE_RATIO 2
-
/*
* Dquot hashtable constants/threshold values.
*/
int qm_dqfrlist_cnt;
atomic_t qm_totaldquots; /* total incore dquots */
uint qm_nrefs; /* file systems with quota on */
- int qm_dqfree_ratio;/* ratio of free to inuse dquots */
kmem_zone_t *qm_dqzone; /* dquot mem-alloc zone */
kmem_zone_t *qm_dqtrxzone; /* t_dqinfo of transactions */
} xfs_qm_t;
extern int xfs_qm_write_sb_changes(xfs_mount_t *, __int64_t);
/* dquot stuff */
-extern boolean_t xfs_qm_dqalloc_incore(xfs_dquot_t **);
extern int xfs_qm_dqpurge_all(xfs_mount_t *, uint);
extern void xfs_qm_dqrele_all_inodes(xfs_mount_t *, uint);
{
/* maximum; incore; ratio free to inuse; freelist */
seq_printf(m, "%d\t%d\t%d\t%u\n",
- ndquot,
+ 0,
xfs_Gqm? atomic_read(&xfs_Gqm->qm_totaldquots) : 0,
- xfs_Gqm? xfs_Gqm->qm_dqfree_ratio : 0,
+ 0,
xfs_Gqm? xfs_Gqm->qm_dqfrlist_cnt : 0);
return 0;
}
DEFINE_DQUOT_EVENT(xfs_dqadjust);
DEFINE_DQUOT_EVENT(xfs_dqreclaim_want);
DEFINE_DQUOT_EVENT(xfs_dqreclaim_dirty);
-DEFINE_DQUOT_EVENT(xfs_dqreclaim_unlink);
+DEFINE_DQUOT_EVENT(xfs_dqreclaim_busy);
+DEFINE_DQUOT_EVENT(xfs_dqreclaim_done);
DEFINE_DQUOT_EVENT(xfs_dqattach_found);
DEFINE_DQUOT_EVENT(xfs_dqattach_get);
-DEFINE_DQUOT_EVENT(xfs_dqinit);
-DEFINE_DQUOT_EVENT(xfs_dqreuse);
DEFINE_DQUOT_EVENT(xfs_dqalloc);
DEFINE_DQUOT_EVENT(xfs_dqtobp_read);
DEFINE_DQUOT_EVENT(xfs_dqread);
return sizeof(w) == 4 ? hweight32(w) : hweight64(w);
}
+/**
+ * rol64 - rotate a 64-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 rol64(__u64 word, unsigned int shift)
+{
+ return (word << shift) | (word >> (64 - shift));
+}
+
+/**
+ * ror64 - rotate a 64-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u64 ror64(__u64 word, unsigned int shift)
+{
+ return (word >> shift) | (word << (64 - shift));
+}
+
/**
* rol32 - rotate a 32-bit value left
* @word: value to rotate
#define MMC_CARD_SDXC (1<<6) /* card is SDXC */
#define MMC_CARD_REMOVED (1<<7) /* card has been removed */
#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */
+#define MMC_STATE_SLEEP (1<<9) /* card is in sleep state */
unsigned int quirks; /* card quirks */
#define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */
#define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */
#define mmc_sd_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_ext_capacity(c) ((c)->state & MMC_CARD_SDXC)
#define mmc_card_removed(c) ((c) && ((c)->state & MMC_CARD_REMOVED))
+#define mmc_card_is_sleep(c) ((c)->state & MMC_STATE_SLEEP)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
#define mmc_sd_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)
#define mmc_card_set_ext_capacity(c) ((c)->state |= MMC_CARD_SDXC)
#define mmc_card_set_removed(c) ((c)->state |= MMC_CARD_REMOVED)
+#define mmc_card_set_sleep(c) ((c)->state |= MMC_STATE_SLEEP)
+#define mmc_card_clr_sleep(c) ((c)->state &= ~MMC_STATE_SLEEP)
/*
* Quirk add/remove for MMC products.
*/
#ifndef LINUX_MMC_DW_MMC_H
#define LINUX_MMC_DW_MMC_H
+#include <linux/scatterlist.h>
+
#define MAX_MCI_SLOTS 2
enum dw_mci_state {
* @lock: Spinlock protecting the queue and associated data.
* @regs: Pointer to MMIO registers.
* @sg: Scatterlist entry currently being processed by PIO code, if any.
- * @pio_offset: Offset into the current scatterlist entry.
+ * @sg_miter: PIO mapping scatterlist iterator.
* @cur_slot: The slot which is currently using the controller.
* @mrq: The request currently being processed on @cur_slot,
* or NULL if the controller is idle.
void __iomem *regs;
struct scatterlist *sg;
- unsigned int pio_offset;
+ struct sg_mapping_iter sg_miter;
struct dw_mci_slot *cur_slot;
struct mmc_request *mrq;
#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */
#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \
MMC_CAP2_HS200_1_2V_SDR)
+#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */
mmc_pm_flag_t pm_caps; /* supported pm features */
unsigned int power_notify_type;
return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
}
+#ifdef CONFIG_MMC_CLKGATE
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
+unsigned int mmc_host_clk_rate(struct mmc_host *host);
+
+#else
+static inline void mmc_host_clk_hold(struct mmc_host *host)
+{
+}
+
+static inline void mmc_host_clk_release(struct mmc_host *host)
+{
+}
+
+static inline unsigned int mmc_host_clk_rate(struct mmc_host *host)
+{
+ return host->ios.clock;
+}
+#endif
#endif /* LINUX_MMC_HOST_H */
for (i = 0; i < num_params; i++) {
if (parameq(param, params[i].name)) {
/* No one handled NULL, so do it here. */
- if (!val && params[i].ops->set != param_set_bool)
+ if (!val && params[i].ops->set != param_set_bool
+ && params[i].ops->set != param_set_bint)
return -EINVAL;
pr_debug("They are equal! Calling %p\n",
params[i].ops->set);
(id->function >> 12) & 0x0f, (id->function >> 8) & 0x0f);
return 1;
}
-ADD_TO_DEVTABLE("isa", struct isapnp_device_id, do_isapnp_entry);
+ADD_TO_DEVTABLE("isapnp", struct isapnp_device_id, do_isapnp_entry);
/*
* Append a match expression for a single masked hex digit.
ALC882_FIXUP_ACER_ASPIRE_8930G,
ALC882_FIXUP_ASPIRE_8930G_VERBS,
ALC885_FIXUP_MACPRO_GPIO,
+ ALC889_FIXUP_DAC_ROUTE,
};
static void alc889_fixup_coef(struct hda_codec *codec,
alc882_gpio_mute(codec, 1, 0);
}
+/* Fix the connection of some pins for ALC889:
+ * At least, Acer Aspire 5935 shows the connections to DAC3/4 don't
+ * work correctly (bko#42740)
+ */
+static void alc889_fixup_dac_route(struct hda_codec *codec,
+ const struct alc_fixup *fix, int action)
+{
+ if (action == ALC_FIXUP_ACT_PRE_PROBE) {
+ hda_nid_t conn1[2] = { 0x0c, 0x0d };
+ hda_nid_t conn2[2] = { 0x0e, 0x0f };
+ snd_hda_override_conn_list(codec, 0x14, 2, conn1);
+ snd_hda_override_conn_list(codec, 0x15, 2, conn1);
+ snd_hda_override_conn_list(codec, 0x18, 2, conn2);
+ snd_hda_override_conn_list(codec, 0x1a, 2, conn2);
+ }
+}
+
static const struct alc_fixup alc882_fixups[] = {
[ALC882_FIXUP_ABIT_AW9D_MAX] = {
.type = ALC_FIXUP_PINS,
.type = ALC_FIXUP_FUNC,
.v.func = alc885_fixup_macpro_gpio,
},
+ [ALC889_FIXUP_DAC_ROUTE] = {
+ .type = ALC_FIXUP_FUNC,
+ .v.func = alc889_fixup_dac_route,
+ },
};
static const struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x0142, "Acer Aspire 7730G",
ALC882_FIXUP_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", ALC882_FIXUP_PB_M5210),
+ SND_PCI_QUIRK(0x1025, 0x0259, "Acer Aspire 5935", ALC889_FIXUP_DAC_ROUTE),
SND_PCI_QUIRK(0x1025, 0x0296, "Acer Aspire 7736z", ALC882_FIXUP_ACER_ASPIRE_7736),
SND_PCI_QUIRK(0x1043, 0x13c2, "Asus A7M", ALC882_FIXUP_EAPD),
SND_PCI_QUIRK(0x1043, 0x1873, "ASUS W90V", ALC882_FIXUP_ASUS_W90V),
spec->gpio_dir, spec->gpio_data);
} else {
notmtd_lvl = spec->gpio_led_polarity ?
- AC_PINCTL_VREF_HIZ : AC_PINCTL_VREF_GRD;
+ AC_PINCTL_VREF_50 : AC_PINCTL_VREF_GRD;
muted_lvl = spec->gpio_led_polarity ?
- AC_PINCTL_VREF_GRD : AC_PINCTL_VREF_HIZ;
+ AC_PINCTL_VREF_GRD : AC_PINCTL_VREF_50;
spec->vref_led = muted ? muted_lvl : notmtd_lvl;
stac_vrefout_set(codec, spec->vref_mute_led_nid,
spec->vref_led);
/* init input-src */
for (i = 0; i < spec->num_adc_nids; i++) {
int adc_idx = spec->inputs[spec->cur_mux[i]].adc_idx;
+ /* secondary ADCs must have the unique MUX */
+ if (i > 0 && !spec->mux_nids[i])
+ break;
if (spec->mux_nids[adc_idx]) {
int mux_idx = spec->inputs[spec->cur_mux[i]].mux_idx;
snd_hda_codec_write(codec, spec->mux_nids[adc_idx], 0,
.name = "MSI P4 ATX 645 Ultra",
.type = AC97_TUNE_HP_ONLY
},
+ {
+ .subvendor = 0x161f,
+ .subdevice = 0x202f,
+ .name = "Gateway M520",
+ .type = AC97_TUNE_INV_EAPD
+ },
{
.subvendor = 0x161f,
.subdevice = 0x203a,
{
struct fsi_priv *fsi = fsi_get_priv(substream);
struct fsi_stream *io = fsi_get_stream(fsi, fsi_is_play(substream));
- int samples_pos = io->buff_sample_pos - 1;
- if (samples_pos < 0)
- samples_pos = 0;
-
- return fsi_sample2frame(fsi, samples_pos);
+ return fsi_sample2frame(fsi, io->buff_sample_pos);
}
static struct snd_pcm_ops fsi_pcm_ops = {
projects / karo-tx-linux.git / commitdiff