--- /dev/null
+* Texas Instruments Keystone Navigator Queue Management SubSystem driver
+
+Driver source code path
+ drivers/soc/ti/knav_qmss.c
+ drivers/soc/ti/knav_qmss_acc.c
+
+The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of
+the main hardware sub system which forms the backbone of the Keystone
+multi-core Navigator. QMSS consist of queue managers, packed-data structure
+processors(PDSP), linking RAM, descriptor pools and infrastructure
+Packet DMA.
+The Queue Manager is a hardware module that is responsible for accelerating
+management of the packet queues. Packets are queued/de-queued by writing or
+reading descriptor address to a particular memory mapped location. The PDSPs
+perform QMSS related functions like accumulation, QoS, or event management.
+Linking RAM registers are used to link the descriptors which are stored in
+descriptor RAM. Descriptor RAM is configurable as internal or external memory.
+The QMSS driver manages the PDSP setups, linking RAM regions,
+queue pool management (allocation, push, pop and notify) and descriptor
+pool management.
+
+knav qmss driver provides a set of APIs to drivers to open/close qmss queues,
+allocate descriptor pools, map the descriptors, push/pop to queues etc. For
+details of the available APIs, please refers to include/linux/soc/ti/knav_qmss.h
+
+DT documentation is available at
+Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt
+
+Accumulator QMSS queues using PDSP firmware
+============================================
+The QMSS PDSP firmware support accumulator channel that can monitor a single
+queue or multiple contiguous queues. drivers/soc/ti/knav_qmss_acc.c is the
+driver that interface with the accumulator PDSP. This configures
+accumulator channels defined in DTS (example in DT documentation) to monitor
+1 or 32 queues per channel. More description on the firmware is available in
+CPPI/QMSS Low Level Driver document (docs/CPPI_QMSS_LLD_SDS.pdf) at
+ git://git.ti.com/keystone-rtos/qmss-lld.git
+
+k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin firmware supports upto 48 accumulator
+channels. This firmware is available under ti-keystone folder of
+firmware.git at
+ git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
+
+To use copy the firmware image to lib/firmware folder of the initramfs or
+ubifs file system and provide a sym link to k2_qmss_pdsp_acc48_k2_le_1_0_0_9.bin
+in the file system and boot up the kernel. User would see
+
+ "firmware file ks2_qmss_pdsp_acc48.bin downloaded for PDSP"
+
+in the boot up log if loading of firmware to PDSP is successful.
+
+Use of accumulated queues requires the firmware image to be present in the
+file system. The driver doesn't acc queues to the supported queue range if
+PDSP is not running in the SoC. The API call fails if there is a queue open
+request to an acc queue and PDSP is not running. So make sure to copy firmware
+to file system before using these queue types.
Required root node property:
compatible: "amlogic,meson8";
+Boards with the Amlogic Meson8b SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,meson8b";
+
Board compatible values:
- - "geniatech,atv1200"
- - "minix,neo-x8"
+ - "geniatech,atv1200" (Meson6)
+ - "minix,neo-x8" (Meson8)
+ - "tronfy,mxq" (Meson8b)
+ - "hardkernel,odroid-c1" (Meson8b)
--- /dev/null
+APM X-GENE SoC series SCU Registers
+
+This system clock unit contain various register that control block resets,
+clock enable/disables, clock divisors and other deepsleep registers.
+
+Properties:
+ - compatible : should contain two values. First value must be:
+ - "apm,xgene-scu"
+ second value must be always "syscon".
+
+ - reg : offset and length of the register set.
+
+Example :
+ scu: system-clk-controller@17000000 {
+ compatible = "apm,xgene-scu","syscon";
+ reg = <0x0 0x17000000 0x0 0x400>;
+ };
--- /dev/null
+System Control and Power Interface (SCPI) Message Protocol
+----------------------------------------------------------
+
+Firmware implementing the SCPI described in ARM document number ARM DUI 0922B
+("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be used
+by Linux to initiate various system control and power operations.
+
+Required properties:
+
+- compatible : should be "arm,scpi"
+- mboxes: List of phandle and mailbox channel specifiers
+ All the channels reserved by remote SCP firmware for use by
+ SCPI message protocol should be specified in any order
+- shmem : List of phandle pointing to the shared memory(SHM) area between the
+ processors using these mailboxes for IPC, one for each mailbox
+ SHM can be any memory reserved for the purpose of this communication
+ between the processors.
+
+See Documentation/devicetree/bindings/mailbox/mailbox.txt
+for more details about the generic mailbox controller and
+client driver bindings.
+
+Clock bindings for the clocks based on SCPI Message Protocol
+------------------------------------------------------------
+
+This binding uses the common clock binding[1].
+
+Container Node
+==============
+Required properties:
+- compatible : should be "arm,scpi-clocks"
+ All the clocks provided by SCP firmware via SCPI message
+ protocol much be listed as sub-nodes under this node.
+
+Sub-nodes
+=========
+Required properties:
+- compatible : shall include one of the following
+ "arm,scpi-dvfs-clocks" - all the clocks that are variable and index based.
+ These clocks don't provide an entire range of values between the
+ limits but only discrete points within the range. The firmware
+ provides the mapping for each such operating frequency and the
+ index associated with it. The firmware also manages the
+ voltage scaling appropriately with the clock scaling.
+ "arm,scpi-variable-clocks" - all the clocks that are variable and provide full
+ range within the specified range. The firmware provides the
+ range of values within a specified range.
+
+Other required properties for all clocks(all from common clock binding):
+- #clock-cells : Should be 1. Contains the Clock ID value used by SCPI commands.
+- clock-output-names : shall be the corresponding names of the outputs.
+- clock-indices: The identifying number for the clocks(i.e.clock_id) in the
+ node. It can be non linear and hence provide the mapping of identifiers
+ into the clock-output-names array.
+
+SRAM and Shared Memory for SCPI
+-------------------------------
+
+A small area of SRAM is reserved for SCPI communication between application
+processors and SCP.
+
+Required properties:
+- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno
+
+The rest of the properties should follow the generic mmio-sram description
+found in ../../misc/sysram.txt
+
+Each sub-node represents the reserved area for SCPI.
+
+Required sub-node properties:
+- reg : The base offset and size of the reserved area with the SRAM
+- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
+ shared memory on Juno platforms
+
+Sensor bindings for the sensors based on SCPI Message Protocol
+--------------------------------------------------------------
+SCPI provides an API to access the various sensors on the SoC.
+
+Required properties:
+- compatible : should be "arm,scpi-sensors".
+- #thermal-sensor-cells: should be set to 1. This property follows the
+ thermal device tree bindings[2].
+
+ Valid cell values are raw identifiers (Sensor
+ ID) as used by the firmware. Refer to
+ platform documentation for your
+ implementation for the IDs to use. For Juno
+ R0 and Juno R1 refer to [3].
+
+[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/thermal/thermal.txt
+[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
+
+Example:
+
+sram: sram@50000000 {
+ compatible = "arm,juno-sram-ns", "mmio-sram";
+ reg = <0x0 0x50000000 0x0 0x10000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x50000000 0x10000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x0 0x200>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x200 0x200>;
+ };
+};
+
+mailbox: mailbox0@40000000 {
+ ....
+ #mbox-cells = <1>;
+};
+
+scpi_protocol: scpi@2e000000 {
+ compatible = "arm,scpi";
+ mboxes = <&mailbox 0 &mailbox 1>;
+ shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>, <1>, <2>;
+ clock-output-names = "atlclk", "aplclk","gpuclk";
+ };
+ scpi_clk: scpi_clocks@3 {
+ compatible = "arm,scpi-variable-clocks";
+ #clock-cells = <1>;
+ clock-indices = <3>, <4>;
+ clock-output-names = "pxlclk0", "pxlclk1";
+ };
+ };
+
+ scpi_sensors0: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+};
+
+cpu@0 {
+ ...
+ reg = <0 0>;
+ clocks = <&scpi_dvfs 0>;
+};
+
+hdlcd@7ff60000 {
+ ...
+ reg = <0 0x7ff60000 0 0x1000>;
+ clocks = <&scpi_clk 4>;
+};
+
+thermal-zones {
+ soc_thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <1000>;
+
+ /* sensor ID */
+ thermal-sensors = <&scpi_sensors0 3>;
+ ...
+ };
+};
+
+In the above example, the #clock-cells is set to 1 as required.
+scpi_dvfs has 3 output clocks namely: atlclk, aplclk, and gpuclk with 0,
+1 and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0
+and pxlclk1 with 3 and 4 as clock-indices.
+
+The first consumer in the example is cpu@0 and it has '0' as the clock
+specifier which points to the first entry in the output clocks of
+scpi_dvfs i.e. "atlclk".
+
+Similarly the second example is hdlcd@7ff60000 and it has pxlclk1 as input
+clock. '4' in the clock specifier here points to the second entry
+in the output clocks of scpi_clocks i.e. "pxlclk1"
+
+The thermal-sensors property in the soc_thermal node uses the
+temperature sensor provided by SCP firmware to setup a thermal
+zone. The ID "3" is the sensor identifier for the temperature sensor
+as used by the firmware.
- compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
- compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+hif-cpubiuctrl node
+-------------------
+SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit
+(BIU) block which controls and interfaces the CPU complex to the different
+Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block
+offers a feature called Write Pairing which consists in collapsing two adjacent
+cache lines into a single (bursted) write transaction towards the memory
+controller (MEMC) to maximize write bandwidth.
+
+Required properties:
+
+ - compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon"
+
+Optional properties:
+
+ - brcm,write-pairing:
+ Boolean property, which when present indicates that the chip
+ supports write-pairing.
+
example:
rdb {
#address-cells = <1>;
hif_cpubiuctrl: syscon@3e2400 {
compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
reg = <0x3e2400 0x5b4>;
+ brcm,write-pairing;
};
hif_continuation: syscon@452000 {
};
};
-Lastly, nodes that allow for support of SMP initialization and reboot are
-required:
+Nodes that allow for support of SMP initialization and reboot are required:
smpboot
-------
compatible = "brcm,brcmstb-reboot";
syscon = <&sun_top_ctrl 0x304 0x308>;
};
+
+
+
+Power management
+----------------
+
+For power management (particularly, S2/S3/S5 system suspend), the following SoC
+components are needed:
+
+= Always-On control block (AON CTRL)
+
+This hardware provides control registers for the "always-on" (even in low-power
+modes) hardware, such as the Power Management State Machine (PMSM).
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-aon-ctrl"
+- reg : the register start and length for the AON CTRL block
+
+Example:
+
+aon-ctrl@410000 {
+ compatible = "brcm,brcmstb-aon-ctrl";
+ reg = <0x410000 0x400>;
+};
+
+= Memory controllers
+
+A Broadcom STB SoC typically has a number of independent memory controllers,
+each of which may have several associated hardware blocks, which are versioned
+independently (control registers, DDR PHYs, etc.). One might consider
+describing these controllers as a parent "memory controllers" block, which
+contains N sub-nodes (one for each controller in the system), each of which is
+associated with a number of hardware register resources (e.g., its PHY). See
+the example device tree snippet below.
+
+== MEMC (MEMory Controller)
+
+Represents a single memory controller instance.
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-memc" and "simple-bus"
+
+Should contain subnodes for any of the following relevant hardware resources:
+
+== DDR PHY control
+
+Control registers for this memory controller's DDR PHY.
+
+Required properties:
+- compatible : should contain one of these
+ "brcm,brcmstb-ddr-phy-v225.1"
+ "brcm,brcmstb-ddr-phy-v240.1"
+ "brcm,brcmstb-ddr-phy-v240.2"
+
+- reg : the DDR PHY register range
+
+== DDR SHIMPHY
+
+Control registers for this memory controller's DDR SHIMPHY.
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-ddr-shimphy-v1.0"
+- reg : the DDR SHIMPHY register range
+
+== MEMC DDR control
+
+Sequencer DRAM parameters and control registers. Used for Self-Refresh
+Power-Down (SRPD), among other things.
+
+Required properties:
+- compatible : should contain "brcm,brcmstb-memc-ddr"
+- reg : the MEMC DDR register range
+
+Example:
+
+memory_controllers {
+ ranges;
+ compatible = "simple-bus";
+
+ memc@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges;
+
+ ddr-phy@f1106000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0xf1106000 0x21c>;
+ };
+
+ shimphy@f1108000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0xf1108000 0xe4>;
+ };
+
+ memc-ddr@f1102000 {
+ reg = <0xf1102000 0x800>;
+ compatible = "brcm,brcmstb-memc-ddr";
+ };
+ };
+
+ memc@1 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges;
+
+ ddr-phy@f1186000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0xf1186000 0x21c>;
+ };
+
+ shimphy@f1188000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0xf1188000 0xe4>;
+ };
+
+ memc-ddr@f1182000 {
+ reg = <0xf1182000 0x800>;
+ compatible = "brcm,brcmstb-memc-ddr";
+ };
+ };
+
+ memc@2 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ ranges;
+
+ ddr-phy@f1206000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0xf1206000 0x21c>;
+ };
+
+ shimphy@f1208000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0xf1208000 0xe4>;
+ };
+
+ memc-ddr@f1202000 {
+ reg = <0xf1202000 0x800>;
+ compatible = "brcm,brcmstb-memc-ddr";
+ };
+ };
+};
--- /dev/null
+Broadcom Northstar Plus device tree bindings
+--------------------------------------------
+
+Broadcom Northstar Plus family of SoCs are used for switching control
+and management applications as well as residential router/gateway
+applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
+several peripheral interfaces including multiple Gigabit Ethernet PHYs,
+DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
+SATA and several other IO controllers.
+
+Boards with Northstar Plus SoCs shall have the following properties:
+
+Required root node property:
+
+BCM58522
+compatible = "brcm,bcm58522", "brcm,nsp";
+
+BCM58525
+compatible = "brcm,bcm58525", "brcm,nsp";
+
+BCM58535
+compatible = "brcm,bcm58535", "brcm,nsp";
+
+BCM58622
+compatible = "brcm,bcm58622", "brcm,nsp";
+
+BCM58623
+compatible = "brcm,bcm58623", "brcm,nsp";
+
+BCM58625
+compatible = "brcm,bcm58625", "brcm,nsp";
+
+BCM88312
+compatible = "brcm,bcm88312", "brcm,nsp";
Required root node properties:
- compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
+HiP05 D02 Board
+Required root node properties:
+ - compatible = "hisilicon,hip05-d02";
+
Hisilicon system controller
Required properties:
the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550
type UART should use the specified compatible for those devices.
+SoC families:
+
+- Keystone 2 generic SoC:
+ compatible = "ti,keystone"
+
+SoCs:
+
+- Keystone 2 Hawking/Kepler
+ compatible = "ti,k2hk", "ti,keystone"
+- Keystone 2 Lamarr
+ compatible = "ti,k2l", "ti,keystone"
+- Keystone 2 Edison
+ compatible = "ti,k2e", "ti,keystone"
+
Boards:
- Keystone 2 Hawking/Kepler EVM
- compatible = "ti,k2hk-evm","ti,keystone"
+ compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"
- Keystone 2 Lamarr EVM
- compatible = "ti,k2l-evm","ti,keystone"
+ compatible = "ti,k2l-evm", "ti, k2l", "ti,keystone"
- Keystone 2 Edison EVM
- compatible = "ti,k2e-evm","ti,keystone"
+ compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"
--- /dev/null
+MVEBU CPU Config registers
+--------------------------
+
+MVEBU (Marvell SOCs: Armada 370/XP)
+
+Required properties:
+
+- compatible: one of:
+ - "marvell,armada-370-cpu-config"
+ - "marvell,armada-xp-cpu-config"
+
+- reg: Should contain CPU config registers location and length, in
+ their per-CPU variant
+
+Example:
+
+ cpu-config@21000 {
+ compatible = "marvell,armada-xp-cpu-config";
+ reg = <0x21000 0x8>;
+ };
Required properties:
- compatible : should be one of
+ "apm,potenza-pmu"
"arm,armv8-pmuv3"
"arm,cortex-a17-pmu"
"arm,cortex-a15-pmu"
Required root node properties:
- compatible = "radxa,rock", "rockchip,rk3188";
+- Radxa Rock2 Square board:
+ Required root node properties:
+ - compatible = "radxa,rock2-square", "rockchip,rk3288";
+
- Firefly Firefly-RK3288 board:
Required root node properties:
- compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
Required root node properties:
- compatible = "netxeon,r89", "rockchip,rk3288";
+- Google Jaq (Haier Chromebook 11 and more):
+ Required root node properties:
+ - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
+ "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
+ "google,veyron-jaq-rev1", "google,veyron-jaq",
+ "google,veyron", "rockchip,rk3288";
+
- Google Jerry (Hisense Chromebook C11 and more):
Required root node properties:
- compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6",
compatible = "renesas,armadillo800eva"
- BOCK-W
compatible = "renesas,bockw", "renesas,r8a7778"
- - BOCK-W - Reference Device Tree Implementation
- compatible = "renesas,bockw-reference", "renesas,r8a7778"
- Genmai (RTK772100BC00000BR)
compatible = "renesas,genmai", "renesas,r7s72100"
- Gose
compatible = "renesas,lager", "renesas,r8a7790"
- Marzen
compatible = "renesas,marzen", "renesas,r8a7779"
-
-Note: Reference Device Tree Implementations are temporary implementations
- to ease the migration from platform devices to Device Tree, and are
- intended to be removed in the future.
+ - Porter (M2-LCDP)
+ compatible = "renesas,porter", "renesas,r8a7791"
+ - SILK (RTP0RC7794LCB00011S)
+ compatible = "renesas,silk", "renesas,r8a7794"
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
+Optional properties :
+- #power-domain-cells : shall contain 1
+
Example:
clock-controller@900000 {
compatible = "qcom,gcc-msm8960";
reg = <0x900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
};
- #clock-cells : shall contain 1
- #reset-cells : shall contain 1
+Optional properties :
+- #power-domain-cells : shall contain 1
+
Example:
clock-controller@4000000 {
compatible = "qcom,mmcc-msm8960";
reg = <0x4000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
};
Required properties:
- compatible : "pwm-fan"
- pwms : the PWM that is used to control the PWM fan
+- cooling-levels : PWM duty cycle values in a range from 0 to 255
+ which correspond to thermal cooling states
Example:
- pwm-fan {
+ fan0: pwm-fan {
compatible = "pwm-fan";
- status = "okay";
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
pwms = <&pwm 0 10000 0>;
+ cooling-levels = <0 102 170 230>;
};
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ thermal-sensors = <&tmu 0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ trips {
+ cpu_alert1: cpu-alert1 {
+ temperature = <100000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 0 1>;
+ };
+ };
+ };
-* Device tree bindings for ARM PL172 MultiPort Memory Controller
+* Device tree bindings for ARM PL172/PL175/PL176 MultiPort Memory Controller
Required properties:
-- compatible: "arm,pl172", "arm,primecell"
+- compatible: Must be "arm,primecell" and exactly one from
+ "arm,pl172", "arm,pl175" or "arm,pl176".
- reg: Must contains offset/length value for controller.
- mpmc,extended-wait: Enable extended wait.
-- mpmc,buffer-enable: Enable write buffer.
+- mpmc,buffer-enable: Enable write buffer, option is not supported by
+ PL175 and PL176 controllers.
- mpmc,write-protect: Enable write protect.
- interrupt-parent: Specifies the phandle of the interrupt controller to which
the interrupts from s2mps11 are delivered to.
- interrupts: Interrupt specifiers for interrupt sources.
+- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
+ connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
+ register to turn off the power. Usually the ACOKB is pulled up to VBATT so
+ when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
Optional nodes:
- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
--- /dev/null
+Qualcomm Switch-Mode Battery Charger and Boost
+
+PROPERTIES
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Description: Must be one of:
+ - "qcom,pm8941-charger"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Description: Base address of registers for SMBB block
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Description: The format of the specifier is defined by the binding document
+ describing the node's interrupt parent. Must contain one
+ specifier for each of the following interrupts, in order:
+ - charge done
+ - charge fast mode
+ - charge trickle mode
+ - battery temperature ok
+ - battery present
+ - charger disconnected
+ - USB-in valid
+ - DC-in valid
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Description: Must contain the following list, strictly ordered:
+ "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid"
+
+- qcom,fast-charge-current-limit:
+ Usage: optional (default: 1A, or pre-configured value)
+ Value type: <u32>; uA; range [100mA : 3A]
+ Description: Maximum charge current; May be clamped to safety limits.
+
+- qcom,fast-charge-low-threshold-voltage:
+ Usage: optional (default: 3.2V, or pre-configured value)
+ Value type: <u32>; uV; range [2.1V : 3.6V]
+ Description: Battery voltage limit above which fast charging may operate;
+ Below this value linear or switch-mode auto-trickle-charging
+ will operate.
+
+- qcom,fast-charge-high-threshold-voltage:
+ Usage: optional (default: 4.2V, or pre-configured value)
+ Value type: <u32>; uV; range [3.24V : 5V]
+ Description: Battery voltage limit below which fast charging may operate;
+ The fast charger will attempt to charge the battery to this
+ voltage. May be clamped to safety limits.
+
+- qcom,fast-charge-safe-voltage:
+ Usage: optional (default: 4.2V, or pre-configured value)
+ Value type: <u32>; uV; range [3.24V : 5V]
+ Description: Maximum safe battery voltage; May be pre-set by bootloader, in
+ which case, setting this will harmlessly fail. The property
+ 'fast-charge-high-watermark' will be clamped by this value.
+
+- qcom,fast-charge-safe-current:
+ Usage: optional (default: 1A, or pre-configured value)
+ Value type: <u32>; uA; range [100mA : 3A]
+ Description: Maximum safe battery charge current; May pre-set by bootloader,
+ in which case, setting this will harmlessly fail. The property
+ 'qcom,fast-charge-current-limit' will be clamped by this value.
+
+- qcom,auto-recharge-threshold-voltage:
+ Usage: optional (default: 4.1V, or pre-configured value)
+ Value type: <u32>; uV; range [3.24V : 5V]
+ Description: Battery voltage limit below which auto-recharge functionality
+ will restart charging after end-of-charge; The high cutoff
+ limit for auto-recharge is 5% above this value.
+
+- qcom,minimum-input-voltage:
+ Usage: optional (default: 4.3V, or pre-configured value)
+ Value type: <u32>; uV; range [4.2V : 9.6V]
+ Description: Input voltage level above which charging may operate
+
+- qcom,dc-current-limit:
+ Usage: optional (default: 100mA, or pre-configured value)
+ Value type: <u32>; uA; range [100mA : 2.5A]
+ Description: Default DC charge current limit
+
+- qcom,disable-dc:
+ Usage: optional (default: false)
+ Value type: boolean: <u32> or <empty>
+ Description: Disable DC charger
+
+- qcom,jeita-extended-temp-range:
+ Usage: optional (default: false)
+ Value type: boolean: <u32> or <empty>
+ Description: Enable JEITA extended temperature range; This does *not*
+ adjust the maximum charge voltage or current in the extended
+ temperature range. It only allows charging when the battery
+ is in the extended temperature range. Voltage/current
+ regulation must be done externally to fully comply with
+ the JEITA safety guidelines if this flag is set.
+
+EXAMPLE
+charger@1000 {
+ compatible = "qcom,pm8941-charger";
+ reg = <0x1000 0x700>;
+ interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid";
+
+ qcom,fast-charge-current-limit = <1000000>;
+ qcom,dc-charge-current-limit = <1000000>;
+};
--- /dev/null
+Qualcomm Shared Memory Manager binding
+
+This binding describes the Qualcomm Shared Memory Manager, used to share data
+between various subsystems and OSes in Qualcomm platforms.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be:
+ "qcom,smem"
+
+- memory-region:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: handle to memory reservation for main SMEM memory region.
+
+- qcom,rpm-msg-ram:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: handle to RPM message memory resource
+
+- hwlocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to a hwspinlock used to protect allocations from
+ the shared memory
+
+= EXAMPLE
+The following example shows the SMEM setup for MSM8974, with a main SMEM region
+at 0xfa00000 and the RPM message ram at 0xfc428000:
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ smem_region: smem@fa00000 {
+ reg = <0xfa00000 0x200000>;
+ no-map;
+ };
+ };
+
+ smem@fa00000 {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_region>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ soc {
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
+ };
+ };
--- /dev/null
+* Rockchip Power Domains
+
+Rockchip processors include support for multiple power domains which can be
+powered up/down by software based on different application scenes to save power.
+
+Required properties for power domain controller:
+- compatible: Should be one of the following.
+ "rockchip,rk3288-power-controller" - for RK3288 SoCs.
+- #power-domain-cells: Number of cells in a power-domain specifier.
+ Should be 1 for multiple PM domains.
+- #address-cells: Should be 1.
+- #size-cells: Should be 0.
+
+Required properties for power domain sub nodes:
+- reg: index of the power domain, should use macros in:
+ "include/dt-bindings/power-domain/rk3288.h" - for RK3288 type power domain.
+- clocks (optional): phandles to clocks which need to be enabled while power domain
+ switches state.
+
+Example:
+
+ power: power-controller {
+ compatible = "rockchip,rk3288-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_gpu {
+ reg = <RK3288_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ };
+ };
+
+Node of a device using power domains must have a power-domains property,
+containing a phandle to the power device node and an index specifying which
+power domain to use.
+The index should use macros in:
+ "include/dt-bindings/power-domain/rk3288.h" - for rk3288 type power domain.
+
+Example of the node using power domain:
+
+ node {
+ /* ... */
+ power-domains = <&power RK3288_PD_GPU>;
+ /* ... */
+ };
#size-cells = <1>;
ranges;
pdsp0@0x2a10000 {
- firmware = "keystone/qmss_pdsp_acc48_k2_le_1_0_0_8.fw";
reg = <0x2a10000 0x1000>,
<0x2a0f000 0x100>,
<0x2a0c000 0x3c8>,
toshiba Toshiba Corporation
toumaz Toumaz
tplink TP-LINK Technologies Co., Ltd.
+tronfy Tronfy
truly Truly Semiconductors Limited
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
--- /dev/null
+Kernel driver scpi-hwmon
+========================
+
+Supported chips:
+ * Chips based on ARM System Control Processor Interface
+ Addresses scanned: -
+ Datasheet: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/index.html
+
+Author: Punit Agrawal <punit.agrawal@arm.com>
+
+Description
+-----------
+
+This driver supports hardware monitoring for SoC's based on the ARM
+System Control Processor (SCP) implementing the System Control
+Processor Interface (SCPI). The following sensor types are supported
+by the SCP -
+
+ * temperature
+ * voltage
+ * current
+ * power
+
+The SCP interface provides an API to query the available sensors and
+their values which are then exported to userspace by this driver.
+
+Usage Notes
+-----------
+
+The driver relies on device tree node to indicate the presence of SCPI
+support in the kernel. See
+Documentation/devicetree/bindings/arm/arm,scpi.txt for details of the
+devicetree node.
\ No newline at end of file
F: drivers/net/appletalk/
F: net/appletalk/
+APPLIED MICRO (APM) X-GENE DEVICE TREE SUPPORT
+M: Duc Dang <dhdang@apm.com>
+S: Supported
+F: arch/arm64/boot/dts/apm/
+
APPLIED MICRO (APM) X-GENE SOC ETHERNET DRIVER
M: Iyappan Subramanian <isubramanian@apm.com>
M: Keyur Chudgar <kchudgar@apm.com>
S: Maintained
F: arch/arm/mach-alpine/
-ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
+ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
M: Joachim Eastwood <manabian@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+F: arch/arm/boot/dts/lpc43*
+F: drivers/clk/nxp/clk-lpc18xx*
+F: drivers/clocksource/time-lpc32xx.c
+F: drivers/i2c/busses/i2c-lpc2k.c
+F: drivers/memory/pl172.c
+F: drivers/mtd/spi-nor/nxp-spifi.c
+F: drivers/rtc/rtc-lpc24xx.c
N: lpc18xx
ARM/MAGICIAN MACHINE SUPPORT
F: arch/arm/boot/dts/r7s*
F: arch/arm/boot/dts/r8a*
F: arch/arm/boot/dts/sh*
-F: arch/arm/configs/bockw_defconfig
-F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
F: arch/arm/include/debug/renesas-scif.S
F: arch/arm/mach-shmobile/
S: Supported
F: drivers/scsi/bnx2i/
-BROADCOM CYGNUS/IPROC ARM ARCHITECTURE
+BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
+M: Jon Mason <jonmason@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/cygnus-linux.git
S: Maintained
N: iproc
N: cygnus
+N: nsp
N: bcm9113*
N: bcm9583*
-N: bcm583*
+N: bcm9585*
+N: bcm9586*
+N: bcm988312
N: bcm113*
+N: bcm583*
+N: bcm585*
+N: bcm586*
+N: bcm88312
BROADCOM BRCMSTB GPIO DRIVER
M: Gregory Fong <gregory.0xf0@gmail.com>
S: Supported
F: arch/score/
+SYSTEM CONTROL & POWER INTERFACE (SCPI) Message Protocol drivers
+M: Sudeep Holla <sudeep.holla@arm.com>
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
+F: Documentation/devicetree/bindings/arm/arm,scpi.txt
+F: drivers/clk/clk-scpi.c
+F: drivers/cpufreq/scpi-cpufreq.c
+F: drivers/firmware/arm_scpi.c
+F: include/linux/scpi_protocol.h
+
SCSI CDROM DRIVER
M: Jens Axboe <axboe@kernel.dk>
L: linux-scsi@vger.kernel.org
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_SHMOBILE_LEGACY
- bool "Renesas ARM SoCs (non-multiplatform)"
- select ARCH_SHMOBILE
- select ARM_PATCH_PHYS_VIRT if MMU
- select CLKDEV_LOOKUP
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- select MULTI_IRQ_HANDLER
- select NO_IOPORT_MAP
- select PINCTRL
- select PM_GENERIC_DOMAINS if PM
- select SH_CLK_CPG
- select SPARSE_IRQ
- help
- Support for Renesas ARM SoC platforms using a non-multiplatform
- kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
- and RZ families.
-
config ARCH_RPC
bool "RiscPC"
select ARCH_ACORN
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
default 128 if SOC_AT91RM9200
- default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
choice
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
- int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
- range 11 64 if ARCH_SHMOBILE_LEGACY
+ int "Maximum zone order"
default "12" if SOC_AM33XX
default "9" if SA1111 || ARCH_EFM32
default "11"
0x80020000 | 0xf0020000 | UART8
0x80024000 | 0xf0024000 | UART9
- config AT91_DEBUG_LL_DBGU0
- bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
- select DEBUG_AT91_UART
+ config DEBUG_AT91_UART
+ bool "Kernel low-level debugging on Atmel SoCs"
depends on ARCH_AT91
- depends on SOC_AT91RM9200 || SOC_AT91SAM9
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on atmel devices.
- config AT91_DEBUG_LL_DBGU1
- bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_AT91SAM9 || SOC_SAMA5
+ SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT
+ rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU
+ 9261/9g10, 9rl
+ 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU
+ sama5d4 0xfc00c000 0xfb00c000 USART3
+ sama5d4 0xfc069000 0xfb069000 DBGU
+ sama5d2 0xf8020000 0xf7020000 UART1
- config AT91_DEBUG_LL_DBGU2
- bool "Kernel low-level debugging on sama5d4"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_SAMA5
-
- config AT91_DEBUG_LL_DBGU3
- bool "Kernel low-level debugging on sama5d2"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_SAMA5
+ Please adjust DEBUG_UART_PHYS configuration options based on
+ your needs.
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
endchoice
-config DEBUG_AT91_UART
- bool
- depends on ARCH_AT91
-
config DEBUG_EXYNOS_UART
bool
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
- DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+ DEBUG_AT91_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
- PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
- ARCH_SHMOBILE_LEGACY
+ PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
default "mach/uncompress.h"
config EARLY_PRINTK
--- /dev/null
+fixes
+ <no branch> (d836ace65ee98d7079bc3c5afdbcc0e27dca20a3)
+ git://git.infradead.org/linux-mvebu tags/mvebu-fixes-4.3-1
+ <no branch> (1f744fd317dc55cadd7132c57c499e3117aea01d)
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-fixes-for-4.3-1
+ <no branch> (178b2d09afc05a46f68b190c6594f3a429bc2385)
+ git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux tags/imx-fixes-4.3-2
+ patch
+ ARM: pxa: fix pxa3xx DFI lockup hack
+ ARM: ux500: modify initial levelshifter status
+ MAINTAINERS: Update Allwinner entry and add new maintainer
+ ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers
+ bus: arm-ccn: Handle correctly no-more-cpus case
+ bus: arm-ccn: Fix irq affinity setting on CPU migration
+ drivers/perf: arm_pmu: avoid CPU device_node reference leak
+ ARM: dts: uniphier: fix IRQ number for devices on PH1-LD6b ref board
+ <no branch> (d8e1f5ed11a39a68da00f05000466c4f6db4456e)
+ git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.3/fixes-rc5
+ patch
+ ARM: tegra: Comment out gpio-ranges properties
+
+next/fixes-non-critical
+ patch
+ ARM: cns3xxx: pci: avoid potential stack overflow
+ davinci/fixes
+ git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci tags/davinci-for-v4.4/fixes
+ patch
+ soc: ti: reset irq affinity before freeing irq
+ <no branch> (63f37ddf5c221c5a86ea9e45625bd0381feabc13)
+ http://github.com/Broadcom/stblinux tags/arm-soc/for-4.4/maintainers
+ patch
+ MAINTAINERS: update lpc18xx entry with more drivers
+
+next/cleanup
+ renesas/cleanup
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-cleanup-for-v4.4
+ efm32/cleanup
+ git://git.pengutronix.de/git/ukl/linux tags/efm32-for-4.4-rc1
+ <no branch> (7ee20ff0072154d326c86223fbb88d23aa152b91)
+ git://git.infradead.org/linux-mvebu tags/mvebu-cleanup-4.4-1
+ <no branch> (d42f265a5d7a352d40fa2911666cd5236bc3ccaf)
+ git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.4/cleanup-pt1
+
+next/soc
+ renesas/soc
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-soc-for-v4.4
+ contains renesas/clk
+ at91/soc
+ git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 tags/at91-soc
+ patch
+ ARM: meson: Enable Meson8b SoCs
+ <no branch> (d492cccac28493f26bb70038385a9ef4df19bdee)
+ git://git.infradead.org/linux-mvebu tags/mvebu-soc-4.4-1
+ <no branch> (c582fbfba581d1331a52a85f0d712b0b7ec961c3)
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin64-soc-for-4.4-1
+ <no branch> (e1a3e724a25761a2b2e9e0e059e33afac6409a76)
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-soc-for-4.4-1
+ <no branch> (c4a8ea9e0698945b182ba1e1063a0981b1f35139)
+ http://github.com/Broadcom/stblinux tags/arm-soc/for-4.4/soc
+ <no branch> (045016902bf7abeeb2a86fc9284c30dce228f055)
+ git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone tags/keystone-driver-soc_v2
+ patch
+ ARM: digicolor: select pinctrl/gpio driver
+ <no branch> (a7b3d5a715f489ee542e59d722281c9f16da50dc)
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-soc-for-4.4-2
+
+next/dt
+ hisi/dt
+ git://github.com/hisilicon/linux-hisi tags/hip05-dt-for-4.3
+ st/dt
+ https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti tags/sti-dt-for-v4.4-1
+ at91/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 tags/at91-dt
+ xgene/dt
+ https://github.com/AppliedMicro/xgene-next tags/xgene-dts-for-v4.4-1
+ socfpga/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux tags/socfpga_dts_for_v4.4
+ patch
+ arm64: dts: add all hi6220 uart nodes
+ renesas/cleanup
+ Merge branch 'renesas/cleanup' into next/dt
+ renesas/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-dt-for-v4.4
+ patch
+ of: documentation: Add vendor prefix for Tronfy
+ of: documentation: add bindings documentation for Meson8b
+ ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards
+ keystone/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone tags/keystone-dts
+ rockchip/dts32
+ git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v4.4-rockchip-dts32-1
+ bcm/dt
+ http://github.com/Broadcom/stblinux tags/arm-soc/for-4.4/devicetree
+ mvebu/dt
+ git://git.infradead.org/linux-mvebu tags/mvebu-dt-4.4-1
+ berlin/dt
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-dt-for-4.4-1
+ berlin/dt64
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin64-dt-for-4.4-1
+ lpc18xx/dt
+ https://github.com/manabian/linux-lpc tags/lpc18xx_dts_for_4.4
+ sunxi/dt
+ https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux tags/sunxi-dt-for-4.4
+ patch
+ ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers
+ hisi/dt2
+ git://github.com/hisilicon/linux-hisi tags/hisi-soc-dt-for-4.4
+ patch
+ ARM64: dts: vexpress: Use a symlink to vexpress-v2m-rs1.dtsi from arch=arm
+ samsung/dt
+ git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung tags/samsung-dt-1
+ patch
+ ARM: dts: uniphier: change the external bus address mapping
+ renesas/dt2
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-dt2-for-v4.4
+ patch
+ ARM64: juno: add NOR flash to device tree
+ qcom/dt
+ git://codeaurora.org/quic/kernel/agross-msm tags/qcom-dt-for-4.4
+ <no branch> (28c039eebaaa28def9364b9a12a30192be8b4730)
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-dt-cpuclk-for-4.4-1
+ <no branch> (be146412501bc2ed49183637605da97f47125696)
+ git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap tags/omap-for-v4.4/dt-pt1
+ <no branch> (9d45708f5adb940432bc99325d67ddc813bc4b22)
+ git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone tags/keystone-dts-part2
+ patch
+ ARM: digicolor: add pinctrl module device node
+ ARM: digicolor: dts: add uart pin configuration
+ <no branch> (dfacaf0e7cbe9f845459f3332f94cdbc368932af)
+ git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux tags/juno-scpi-for-v4.4
+ <no branch> (00a9e053da0b9e150b7f8fefa3c409d7e71ce48f)
+ git://codeaurora.org/quic/kernel/agross-msm tags/qcom-arm64-for-4.4
+
+next/defconfig
+ renesas/defconfig
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-defconfig-for-v4.4
+ broadcom/defconfig
+ http://github.com/Broadcom/stblinux tags/arm-soc/for-4.4/defconfig
+ patch
+ ARM: multi_v7_defconfig: Add missing QCOM APQ8064 configs
+ ARM: multi_v7_defconfig: Enable common Rockchip devices/busses
+ ARM: multi_v7_defconfig: Enable common regulators for rockchip boards
+ ARM: multi_v7_defconfig: Enable Rockchip display support
+ ARM: multi_v7_defconfig: Enable the Rockchip USB 2.0 phy
+ ARM: multi_v7_defconfig: Support RTC devices commonly used on Rockchip boards
+ keystone/config
+ git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone tags/keystone-config
+ patch
+ arm64: defconfig: Enable devices for MSM8916
+ ARM: configs: update lpc18xx defconfig
+ ARM: configs: Enable FIXED_PHY in multi_v7 defconfig
+
+next/drivers
+ renesas/clk
+ git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas tags/renesas-clk-for-v4.4
+ at91/drivers
+ git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux tags/at91-cleanup-4.4
+ rockchip/drivers
+ git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip tags/v4.4-rockchip-drivers1
+ drivers/scpi
+ git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux tags/arm-scpi-for-v4.4
+ <no branch> (961a86d22e89428516fa7183b7750a4ba9866f4d)
+ https://github.com/manabian/linux-lpc tags/drivers_pl172_for_4.4
+ <no branch> (515f1a2027006839c08c842da919abfcc3c7ae2a)
+ git://git.infradead.org/users/hesselba/linux-berlin tags/berlin-new-cpuclk-for-4.4-1
+ <no branch> (d0bfd7c9b162612de55ca2d204403b90dc278db6)
+ git://codeaurora.org/quic/kernel/agross-msm tags/qcom-soc-for-4.4
+ patch
+ soc: qcom/smem: add HWSPINLOCK dependency
+
+
bcm47081-buffalo-wzr-900dhp.dtb \
bcm4709-asus-rt-ac87u.dtb \
bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-netgear-r7000.dtb \
bcm4709-netgear-r8000.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm28155-ap.dtb \
bcm21664-garnet.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+ bcm958625k.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5250-snow-rev5.dtb \
exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
exynos5420-smdk5420.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
+ exynos5422-odroidxu4.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
pxa168-aspenite.dtb \
pxa910-dkb.dtb \
mmp2-brownstone.dtb
+dtb-$(CONFIG_MACH_MESON8B) += \
+ meson8b-mxq.dtb \
+ meson8b-odroidc1.dtb
dtb-$(CONFIG_ARCH_MOXART) += \
moxart-uc7112lx.dtb
dtb-$(CONFIG_SOC_IMX1) += \
am335x-base0033.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
+ am335x-bonegreen.dtb \
am335x-sl50.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
rk3288-firefly.dtb \
+ rk3288-popmetal.dtb \
rk3288-r89.dtb \
+ rk3288-rock2-square.dtb \
+ rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
rk3288-veyron-minnie.dtb \
rk3288-veyron-pinky.dtb \
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
- r8a7778-bockw.dtb \
- r8a7778-bockw-reference.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
+ r8a7791-porter.dtb \
r8a7793-gose.dtb \
r8a7794-alt.dtb \
r8a7794-silk.dtb \
sun4i-a10-gemei-g9.dtb \
sun4i-a10-hackberry.dtb \
sun4i-a10-hyundai-a7hd.dtb \
+ sun4i-a10-inet1.dtb \
sun4i-a10-inet97fv2.dtb \
+ sun4i-a10-inet9f-rev03.dtb \
sun4i-a10-itead-iteaduino-plus.dtb \
sun4i-a10-jesurun-q5.dtb \
sun4i-a10-marsboard.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
+ sun5i-a10s-auxtek-t003.dtb \
sun5i-a10s-auxtek-t004.dtb \
sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
+ sun5i-a10s-wobo-i5.dtb \
sun5i-a13-hsg-h702.dtb \
+ sun5i-a13-inet-98v-rev2.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
+ sun5i-a13-q8-tablet.dtb \
sun5i-a13-utoo-p66.dtb
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-i7.dtb \
sun6i-a31-m9.dtb \
sun6i-a31-mele-a1000g-quad.dtb \
- sun6i-a31s-cs908.dtb
+ sun6i-a31s-cs908.dtb \
+ sun6i-a31s-yones-toptech-bs1078-v2.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapi.dtb \
sun7i-a20-bananapro.dtb \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-m3.dtb \
sun7i-a20-mk808c.dtb \
+ sun7i-a20-olimex-som-evb.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-orangepi-mini.dtb \
sun7i-a20-pcduino3.dtb \
sun7i-a20-pcduino3-nano.dtb \
- sun7i-a20-wexler-tab7200.dtb
+ sun7i-a20-wexler-tab7200.dtb \
+ sun7i-a20-wits-pro-a20-dkt.dtb
dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a23-evb.dtb \
+ sun8i-a23-gt90h-v4.dtb \
sun8i-a23-ippo-q8h-v5.dtb \
sun8i-a23-ippo-q8h-v1.2.dtb \
sun8i-a33-et-q8-v1.6.dtb \
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-ippo-q8h-v1.2.dtb \
+ sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
bus-width = <0x4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&aes {
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+ model = "TI AM335x BeagleBone Green";
+ compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+ vmmc-supply = <&vmmcsd_fixed>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&am33xx_pinmux {
+ uart2_pins: uart2_pins {
+ pinctrl-single,pins = <
+ 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&rtc {
+ system-power-controller;
+};
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mmc3 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&sham {
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- vbat: fixedregulator@0 {
- compatible = "regulator-fixed";
+ regulators {
+ compatible = "simple-bus";
+
+ vcc5v: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
};
#include "tps65910.dtsi"
&tps {
- vcc1-supply = <&vbat>;
- vcc2-supply = <&vbat>;
- vcc3-supply = <&vbat>;
- vcc4-supply = <&vbat>;
- vcc5-supply = <&vbat>;
- vcc6-supply = <&vbat>;
- vcc7-supply = <&vbat>;
- vccio-supply = <&vbat>;
+ vcc1-supply = <&vcc5v>;
+ vcc2-supply = <&vcc5v>;
+ vcc3-supply = <&vcc5v>;
+ vcc4-supply = <&vcc5v>;
+ vcc5-supply = <&vcc5v>;
+ vcc6-supply = <&vcc5v>;
+ vcc7-supply = <&vcc5v>;
+ vccio-supply = <&vcc5v>;
regulators {
vrtc_reg: regulator@0 {
};
};
-&vbat {
- regulator-name = "vbat";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
-};
-
/* SPI Busses */
&am33xx_pinmux {
spi0_pins: pinmux_spi0 {
model = "Phytec AM335x phyBOARD-WEGA";
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+ regulators {
+ compatible = "simple-bus";
+
+ vcc3v3: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ };
};
/* CAN Busses */
};
&mmc1 {
- vmmc-supply = <&vmmc_reg>;
+ vmmc-supply = <&vcc3v3>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
>;
};
+ dcan0_sleep: dcan0_sleep_pins {
+ pinctrl-single,pins = <
+ 0x178 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
+ 0x17c (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
+ >;
+ };
+
dcan1_default: dcan1_default_pins {
pinctrl-single,pins = <
0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
>;
};
+ dcan1_sleep: dcan1_sleep_pins {
+ pinctrl-single,pins = <
+ 0x180 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
+ 0x184 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
+ >;
+ };
+
vpfe0_pins_default: vpfe0_pins_default {
pinctrl-single,pins = <
0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
/* eMMC sits on mmc2 */
};
&dcan0 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan0_default>;
+ pinctrl-1 = <&dcan0_sleep>;
status = "okay";
};
&dcan1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan1_default>;
+ pinctrl-1 = <&dcan1_sleep>;
status = "okay";
};
pinctrl-1 = <&mmc1_pins_sleep>;
vmmc-supply = <&v3_3d>;
bus-width = <4>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&qspi {
vmmc-supply = <&dcdc4>;
bus-width = <4>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&usb2_phy1 {
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
- cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
&mac {
regulator-max-microvolt = <3300000>;
};
+ aic_dvdd: fixedregulator-aic_dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd_fixed";
+ vin-supply = <&vdd_3v3>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
vtt_fixed: fixedregulator-vtt {
/* TPS51200 */
compatible = "regulator-fixed";
};
};
};
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "BeagleBoard-X15";
+ simple-audio-card,widgets =
+ "Line", "Line Out",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC2L", "Line In",
+ "MIC2R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ };
+
+ sound0_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3104>;
+ clocks = <&clkout2_clk>;
+ };
+ };
};
&dra7_pmx_core {
0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
>;
};
+
+ clkout2_pins_default: clkout2_pins_default {
+ pinctrl-single,pins = <
+ 0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
+ >;
+ };
+
+ clkout2_pins_sleep: clkout2_pins_sleep {
+ pinctrl-single,pins = <
+ 0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
+ >;
+ };
+
+ mcasp3_pins_default: mcasp3_pins_default {
+ pinctrl-single,pins = <
+ 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+ 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+ 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+ 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_pins_sleep: mcasp3_pins_sleep {
+ pinctrl-single,pins = <
+ 0x324 (PIN_INPUT | MUX_MODE15)
+ 0x328 (PIN_INPUT | MUX_MODE15)
+ 0x32c (PIN_INPUT | MUX_MODE15)
+ 0x330 (PIN_INPUT | MUX_MODE15)
+ >;
+ };
};
&i2c1 {
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
};
+
+ tlv320aic3104: tlv320aic3104@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3104";
+ reg = <0x18>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&clkout2_pins_default>;
+ pinctrl-1 = <&clkout2_pins_sleep>;
+ status = "okay";
+ adc-settle-ms = <40>;
+
+ AVDD-supply = <&vdd_3v3>;
+ IOVDD-supply = <&vdd_3v3>;
+ DRVDD-supply = <&vdd_3v3>;
+ DVDD-supply = <&aic_dvdd>;
+ };
};
&i2c3 {
vmmc-supply = <&ldo1_reg>;
bus-width = <4>;
- cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
};
&mmc2 {
&pcie1 {
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins_default>;
+ pinctrl-1 = <&mcasp3_pins_sleep>;
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializers */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
+};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
internal-regs {
serial@12000 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
phy-mode = "rgmii-id";
};
+ crypto@90000 {
+ status = "okay";
+ };
+
mvsdio@d4000 {
pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
internal-regs {
reg = <0x20800 0x8>;
};
+ cpu-config@21000 {
+ compatible = "marvell,armada-370-cpu-config";
+ reg = <0x21000 0x8>;
+ };
+
audio_controller: audio-controller@30000 {
#sound-dai-cells = <1>;
compatible = "marvell,armada370-audio";
ethernet@74000 {
compatible = "marvell,armada-370-neta";
};
+
+ crypto@90000 {
+ compatible = "marvell,armada-370-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <48>;
+ clocks = <&gateclk 23>;
+ clock-names = "cesa0";
+ marvell,crypto-srams = <&crypto_sram>;
+ marvell,crypto-sram-size = <0x7e0>;
+ };
+ };
+
+ crypto_sram: sa-sram {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
+ reg-names = "sram";
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
+
+ /*
+ * The Armada 370 has an erratum preventing the use of
+ * the standard workflow for CPU idle support (relying
+ * on the BootROM code to enter/exit idle state).
+ * Reserve some amount of the crypto SRAM to put the
+ * cpuidle workaround.
+ */
+ idle-sram@0 {
+ reg = <0x0 0x20>;
+ };
};
};
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
};
};
+ crypto@90000 {
+ compatible = "marvell,armada-375-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 30>, <&gateclk 31>,
+ <&gateclk 28>, <&gateclk 29>;
+ clock-names = "cesa0", "cesa1",
+ "cesaz0", "cesaz1";
+ marvell,crypto-srams = <&crypto_sram0>,
+ <&crypto_sram1>;
+ marvell,crypto-sram-size = <0x800>;
+ };
+
sata@a0000 {
compatible = "marvell,orion-sata";
reg = <0xa0000 0x5000>;
};
};
+
+ crypto_sram0: sa-sram0 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+ clocks = <&gateclk 30>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+ };
+
+ crypto_sram1: sa-sram1 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+ clocks = <&gateclk 31>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+ };
};
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi1: spi@10680 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
internal-regs {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
internal-regs {
spi@10600 {
clocks = <&gateclk 4>;
};
+ crypto@90000 {
+ compatible = "marvell,armada-38x-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gateclk 23>, <&gateclk 21>,
+ <&gateclk 14>, <&gateclk 16>;
+ clock-names = "cesa0", "cesa1",
+ "cesaz0", "cesaz1";
+ marvell,crypto-srams = <&crypto_sram0>,
+ <&crypto_sram1>;
+ marvell,crypto-sram-size = <0x800>;
+ };
+
rtc@a3800 {
compatible = "marvell,armada-380-rtc";
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
status = "disabled";
};
};
+
+ crypto_sram0: sa-sram0 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
+ };
+
+ crypto_sram1: sa-sram1 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
+ clocks = <&gateclk 21>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
+ };
};
clocks {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
- MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
devbus-bootcs {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
- MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
devbus-bootcs {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
internal-regs {
serial@12000 {
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
- MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
devbus-bootcs {
status = "okay";
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
+ MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
pcie-controller {
status = "okay";
reg = <0x20800 0x20>;
};
+ cpu-config@21000 {
+ compatible = "marvell,armada-xp-cpu-config";
+ reg = <0x21000 0x8>;
+ };
+
eth2: ethernet@30000 {
compatible = "marvell,armada-xp-neta";
reg = <0x30000 0x4000>;
compatible = "marvell,armada-xp-neta";
};
+ crypto@90000 {
+ compatible = "marvell,armada-xp-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <48>, <49>;
+ clocks = <&gateclk 23>, <&gateclk 23>;
+ clock-names = "cesa0", "cesa1";
+ marvell,crypto-srams = <&crypto_sram0>,
+ <&crypto_sram1>;
+ marvell,crypto-sram-size = <0x800>;
+ };
+
xor@f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
};
};
};
+
+ crypto_sram0: sa-sram0 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+ };
+
+ crypto_sram1: sa-sram1 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+ clocks = <&gateclk 23>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+ };
};
clocks {
*/
/dts-v1/;
#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
/ {
model = "Atmel SAMA5D2 Xplained";
apb {
spi0: spi@f8000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_default>;
status = "okay";
m25p80@0 {
};
macb0: ethernet@f8008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_macb0_default>;
phy-mode = "rmii";
status = "okay";
};
uart1: serial@f8020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
status = "okay";
};
i2c0: i2c@f8028000 {
dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
status = "okay";
};
uart3: serial@fc008000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_default>;
status = "okay";
};
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
status = "okay";
at24@54 {
pagesize = <16>;
};
};
+
+ pinctrl@fc038000 {
+ pinctrl_i2c0_default: i2c0_default {
+ pinmux = <PIN_PD21__TWD0>,
+ <PIN_PD22__TWCK0>;
+ bias-disable;
+ };
+
+ pinctrl_i2c1_default: i2c1_default {
+ pinmux = <PIN_PD4__TWD1>,
+ <PIN_PD5__TWCK1>;
+ bias-disable;
+ };
+
+ pinctrl_macb0_default: macb0_default {
+ pinmux = <PIN_PB14__GTXCK>,
+ <PIN_PB15__GTXEN>,
+ <PIN_PB16__GRXDV>,
+ <PIN_PB17__GRXER>,
+ <PIN_PB18__GRX0>,
+ <PIN_PB19__GRX1>,
+ <PIN_PB20__GTX0>,
+ <PIN_PB21__GTX1>,
+ <PIN_PB22__GMDC>,
+ <PIN_PB23__GMDIO>;
+ bias-disable;
+ };
+
+ pinctrl_spi0_default: spi0_default {
+ pinmux = <PIN_PA14__SPI0_SPCK>,
+ <PIN_PA15__SPI0_MOSI>,
+ <PIN_PA16__SPI0_MISO>,
+ <PIN_PA17__SPI0_NPCS0>;
+ bias-disable;
+ };
+
+ pinctrl_uart1_default: uart1_default {
+ pinmux = <PIN_PD2__URXD1>,
+ <PIN_PD3__UTXD1>;
+ bias-disable;
+ };
+
+ pinctrl_uart3_default: uart3_default {
+ pinmux = <PIN_PB11__URXD3>,
+ <PIN_PB12__UTXD3>;
+ bias-disable;
+ };
+ };
};
};
};
pmic: act8865@5b {
compatible = "active-semi,act8865";
reg = <0x5b>;
- status = "okay";
+ status = "disabled";
regulators {
vcc_1v8_reg: DCDC_REG1 {
d8 {
label = "d8";
gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
- status = "disabled";
+ default-state = "on";
};
d10 {
clocks = <&pck2>;
clock-names = "mclk";
};
+
+ qt1070:keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioE>;
+ interrupts = <25 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ wakeup-source;
+ };
+
+ atmel_mxt_ts@4c {
+ compatible = "atmel,atmel_mxt_ts";
+ reg = <0x4c>;
+ interrupt-parent = <&pioE>;
+ interrupts = <24 0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mxt_ts>;
+ };
};
macb0: ethernet@f8020000 {
atmel,pins =
<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
};
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ pinctrl_mxt_ts: mxt_irq {
+ atmel,pins =
+ <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
};
};
};
isi_0: endpoint {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
};
};
- i2c1: i2c@f8014000 {
- status = "okay";
- };
-
mmc0: mmc@f0008000 {
pinctrl-0 = <
&pinctrl_board_mmc0
};
d9 {
- label = "d6";
+ label = "d9";
gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "nand-disk";
};
d10 {
- label = "d7";
+ label = "d10";
gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <5000000>;
+ clock-frequency = <1000000>;
};
};
atmel,adc-channels-used = <0xffff>;
atmel,adc-vref = <3300>;
atmel,adc-startup-time = <40>;
+ atmel,adc-sample-hold-time = <11>;
atmel,adc-res = <8 10>;
atmel,adc-res-names = "lowres", "highres";
atmel,adc-use-res = "highres";
isi_0: endpoint@0 {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
};
};
+ adc0: adc@f804c000 {
+ atmel,adc-ts-wires = <4>;
+ atmel,adc-ts-pressure-threshold = <10000>;
+ status = "okay";
+ };
+
pinctrl@fffff400 {
camera_sensor {
pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
regulator-name = "ldo5";
};
};
+
+ usb_power_supply: usb_power_supply {
+ compatible = "x-powers,axp202-usb-power-supply";
+ status = "disabled";
+ };
};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-cygnus.h>
#include "skeleton.dtsi"
/include/ "bcm-cygnus-clock.dtsi"
- pinctrl: pinctrl@0x0301d0c8 {
- compatible = "brcm,cygnus-pinmux";
- reg = <0x0301d0c8 0x30>,
- <0x0301d24c 0x2c>;
- };
-
- gpio_crmu: gpio@03024800 {
- compatible = "brcm,cygnus-crmu-gpio";
- reg = <0x03024800 0x50>,
- <0x03024008 0x18>;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- gpio_ccm: gpio@1800a000 {
- compatible = "brcm,cygnus-ccm-gpio";
- reg = <0x1800a000 0x50>,
- <0x0301d164 0x20>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- };
+ core {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- gpio_asiu: gpio@180a5000 {
- compatible = "brcm,cygnus-asiu-gpio";
- reg = <0x180a5000 0x668>;
- #gpio-cells = <2>;
- gpio-controller;
+ timer@20200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
- pinmux = <&pinctrl>;
+ gic: interrupt-controller@21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x21000 0x1000>,
+ <0x20100 0x100>;
+ };
- interrupt-controller;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x22000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
- amba {
+ axi {
+ compatible = "simple-bus";
+ ranges;
#address-cells = <1>;
#size-cells = <1>;
- compatible = "arm,amba-bus", "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
- wdt@18009000 {
- compatible = "arm,sp805" , "arm,primecell";
- reg = <0x18009000 0x1000>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-names = "apb_pclk";
+ pinctrl: pinctrl@0x0301d0c8 {
+ compatible = "brcm,cygnus-pinmux";
+ reg = <0x0301d0c8 0x30>,
+ <0x0301d24c 0x2c>;
};
- };
- i2c0: i2c@18008000 {
- compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
- reg = <0x18008000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
- clock-frequency = <100000>;
- status = "disabled";
- };
+ gpio_crmu: gpio@03024800 {
+ compatible = "brcm,cygnus-crmu-gpio";
+ reg = <0x03024800 0x50>,
+ <0x03024008 0x18>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
- i2c1: i2c@1800b000 {
- compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
- reg = <0x1800b000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
- clock-frequency = <100000>;
- status = "disabled";
- };
+ i2c0: i2c@18008000 {
+ compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+ reg = <0x18008000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
- pcie0: pcie@18012000 {
- compatible = "brcm,iproc-pcie";
- reg = <0x18012000 0x1000>;
+ wdt0: wdt@18009000 {
+ compatible = "arm,sp805" , "arm,primecell";
+ reg = <0x18009000 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ };
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+ gpio_ccm: gpio@1800a000 {
+ compatible = "brcm,cygnus-ccm-gpio";
+ reg = <0x1800a000 0x50>,
+ <0x0301d164 0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
- linux,pci-domain = <0>;
+ i2c1: i2c@1800b000 {
+ compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+ reg = <0x1800b000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
- bus-range = <0x00 0xff>;
+ pcie0: pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x81000000 0 0 0x28000000 0 0x00010000
- 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
- status = "disabled";
- };
+ linux,pci-domain = <0>;
- pcie1: pcie@18013000 {
- compatible = "brcm,iproc-pcie";
- reg = <0x18013000 0x1000>;
+ bus-range = <0x00 0xff>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000
+ 0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
- linux,pci-domain = <1>;
+ status = "disabled";
+ };
- bus-range = <0x00 0xff>;
+ pcie1: pcie@18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x81000000 0 0 0x48000000 0 0x00010000
- 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
- status = "disabled";
- };
+ linux,pci-domain = <1>;
- uart0: serial@18020000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x18020000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-frequency = <100000000>;
- status = "disabled";
- };
+ bus-range = <0x00 0xff>;
- uart1: serial@18021000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x18021000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-frequency = <100000000>;
- status = "disabled";
- };
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000
+ 0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
- uart2: serial@18022000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x18020000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-frequency = <100000000>;
- status = "disabled";
- };
+ status = "disabled";
+ };
- uart3: serial@18023000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x18023000 0x100>;
- reg-shift = <2>;
- reg-io-width = <4>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&axi81_clk>;
- clock-frequency = <100000000>;
- status = "disabled";
- };
+ uart0: serial@18020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
- nand: nand@18046000 {
- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>;
- reg-names = "nand", "iproc-idm", "iproc-ext";
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ uart1: serial@18021000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18021000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ uart2: serial@18022000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
- brcm,nand-has-wp;
- };
+ uart3: serial@18023000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18023000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
- gic: interrupt-controller@19021000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x19021000 0x1000>,
- <0x19020100 0x100>;
- };
+ nand: nand@18046000 {
+ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+ reg = <0x18046000 0x600>, <0xf8105408 0x600>,
+ <0x18046f00 0x20>;
+ reg-names = "nand", "iproc-idm", "iproc-ext";
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- L2: l2-cache {
- compatible = "arm,pl310-cache";
- reg = <0x19022000 0x1000>;
- cache-unified;
- cache-level = <2>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
- timer@19020200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x19020200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
- };
+ brcm,nand-has-wp;
+ };
+ gpio_asiu: gpio@180a5000 {
+ compatible = "brcm,cygnus-asiu-gpio";
+ reg = <0x180a5000 0x668>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinmux = <&pinctrl>;
+
+ interrupt-controller;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ touchscreen: tsc@180a6000 {
+ compatible = "brcm,iproc-touchscreen";
+ reg = <0x180a6000 0x40>;
+ clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+ clock-names = "tsc_clk";
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,nsp";
+ model = "Broadcom Northstar Plus SoC";
+ interrupt-parent = <&gic>;
+
+ mpcore {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x19020000 0x00003000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x2000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ gic: interrupt-controller@19021000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x0100 0x100>;
+ };
+
+ timer@19020200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x0200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+ };
+
+ axi {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0x18000000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: serial@18000300 {
+ compatible = "ns16550a";
+ reg = <0x0300 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <62499840>;
+ status = "disabled";
+ };
+
+ uart1: serial@18000400 {
+ compatible = "ns16550a";
+ reg = <0x0400 0x100>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <62499840>;
+ status = "disabled";
+ };
+ };
+};
reg = <0x00000000 0x08000000>;
};
+ axi@18000000 {
+ usb3@23000 {
+ reg = <0x00023000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
leds {
compatible = "gpio-leds";
/dts-v1/;
#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
/ {
compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
+ model = "Netgear R7000";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power-white {
+ label = "bcm53xx:white:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ power-amber {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 5ghz {
+ label = "bcm53xx:white:5ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ 2ghz {
+ label = "bcm53xx:white:2ghz";
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wps {
+ label = "bcm53xx:white:wps";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ wireless {
+ label = "bcm53xx:white:wireless";
+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb3 {
+ label = "bcm53xx:white:usb3";
+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ usb2 {
+ label = "bcm53xx:white:usb2";
+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
brcm,irq-can-wake;
};
+ aon-ctrl@410000 {
+ compatible = "brcm,brcmstb-aon-ctrl";
+ reg = <0x410000 0x200>, <0x410200 0x400>;
+ reg-names = "aon-ctrl", "aon-sram";
+ };
+
nand: nand@3e2800 {
status = "disabled";
#address-cells = <1>;
};
+ memory_controllers {
+ compatible = "simple-bus";
+ ranges = <0x0 0x0 0xf1100000 0x200000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memc@0 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x80000>;
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x800>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0x6000 0x21c>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0x8000 0xe4>;
+ };
+ };
+
+ memc@1 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x80000>;
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x800>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0x6000 0x21c>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0x8000 0xe4>;
+ };
+ };
+
+ memc@2 {
+ compatible = "brcm,brcmstb-memc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x100000 0x80000>;
+
+ memc-ddr@2000 {
+ compatible = "brcm,brcmstb-memc-ddr";
+ reg = <0x2000 0x800>;
+ };
+
+ ddr-phy@6000 {
+ compatible = "brcm,brcmstb-ddr-phy-v240.1";
+ reg = <0x6000 0x21c>;
+ };
+
+ shimphy@8000 {
+ compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+ reg = <0x8000 0xe4>;
+ };
+ };
+ };
+
+ sram@ffe00000 {
+ compatible = "brcm,boot-sram", "mmio-sram";
+ reg = <0x0 0xffe00000 0x0 0x10000>;
+ };
+
smpboot {
compatible = "brcm,brcmstb-smpboot";
syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
compatible = "brcm,bcm11360", "brcm,cygnus";
- aliases {
- serial0 = &uart3;
- };
-
chosen {
stdout-path = &uart3;
bootargs = "console=ttyS0,115200";
};
- uart3: serial@18023000 {
- status = "okay";
- };
-
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
};
};
};
+
+&uart3 {
+ status = "okay";
+};
+
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+ };
+};
};
chosen {
- stdout-path = &uart3;
- bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
- uart3: serial@18023000 {
- status = "okay";
- };
+&uart3 {
+ status = "okay";
};
/dts-v1/;
#include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
/ {
model = "Cygnus SVK (BCM958300K)";
};
chosen {
- stdout-path = &uart3;
- bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
- pcie0: pcie@18012000 {
- status = "okay";
- };
+&pcie0 {
+ status = "okay";
+};
- pcie1: pcie@18013000 {
- status = "okay";
- };
+&pcie1 {
+ status = "okay";
+};
- uart3: serial@18023000 {
- status = "okay";
- };
+&uart3 {
+ status = "okay";
+};
- nand: nand@18046000 {
- nandcs@1 {
- compatible = "brcm,nandcs";
- reg = <0>;
- nand-on-flash-bbt;
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- nand-ecc-strength = <24>;
- nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
- brcm,nand-oob-sector-size = <27>;
- };
+ brcm,nand-oob-sector-size = <27>;
};
};
/dts-v1/;
#include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
/ {
model = "Cygnus Wireless Audio (BCM958305K)";
};
chosen {
- stdout-path = &uart3;
- bootargs = "console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
};
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&nand {
+ nandcs@1 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
- uart3: serial@18023000 {
- status = "okay";
+ brcm,nand-oob-sector-size = <27>;
};
};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+ model = "NorthStar Plus SVK (BCM958625K)";
+ compatible = "brcm,bcm58625", "brcm,nsp";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Broadcom human machine interface daughter card (bcm9hmidc) installed on
+ * bcm958300k/bcm958305k boards
+ */
+
+&touchscreen {
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ status = "okay";
+};
compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
model = "Marvell Armada 1500 (BG2) SoC";
compatible = "marvell,berlin2", "marvell,berlin";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
device_type = "cpu";
next-level-cache = <&l2>;
reg = <0>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu@1 {
};
};
+ pwm: pwm@f20000 {
+ compatible = "marvell,berlin-pwm";
+ reg = <0xf20000 0x40>;
+ clocks = <&chip_clk CLKID_CFG>;
+ #pwm-cells = <3>;
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
chosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory {
model = "Marvell Armada 1500-mini (BG2CD) SoC";
compatible = "marvell,berlin2cd", "marvell,berlin";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
device_type = "cpu";
next-level-cache = <&l2>;
reg = <0>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ operating-points = <
+ /* kHz uV */
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
status = "disabled";
};
+ pwm: pwm@f20000 {
+ compatible = "marvell,berlin-pwm";
+ reg = <0xf20000 0x40>;
+ clocks = <&chip_clk CLKID_CFG>;
+ #pwm-cells = <3>;
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
};
choosen {
- bootargs = "console=ttyS0,115200 earlyprintk";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
regulators {
model = "Marvell Armada 1500 pro (BG2-Q) SoC";
compatible = "marvell,berlin2q", "marvell,berlin";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
device_type = "cpu";
next-level-cache = <&l2>;
reg = <0>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu@1 {
status = "disabled";
};
+ pwm: pwm@f20000 {
+ compatible = "marvell,berlin-pwm";
+ reg = <0xf20000 0x40>;
+ clocks = <&chip_clk CLKID_CFG>;
+ #pwm-cells = <3>;
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
timeout-sec = <15>;
};
+ pinctrl: pinctrl@f0000e20 {
+ compatible = "cnxt,cx92755-pinctrl";
+ reg = <0xf0000e20 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
uc_regs: syscon@f00003a0 {
compatible = "cnxt,cx92755-uc", "syscon";
reg = <0xf00003a0 0x10>;
&uart0 {
status = "okay";
+ pinctrl-0 = <&uart0_default>;
+ pinctrl-names = "default";
};
&i2c {
status = "okay";
};
+
+&pinctrl {
+ uart0_default: uart0_active {
+ pins = "GP_O0", "GP_O1";
+ function = "client_b";
+ };
+};
};
crypto: crypto-engine@30000 {
- compatible = "marvell,orion-crypto";
- reg = <0x30000 0x10000>,
- <0xffffe000 0x800>;
- reg-names = "regs", "sram";
+ compatible = "marvell,dove-crypto";
+ reg = <0x30000 0x10000>;
+ reg-names = "regs";
interrupts = <31>;
clocks = <&gate_clk 15>;
+ marvell,crypto-srams = <&crypto_sram>;
+ marvell,crypto-sram-size = <0x800>;
status = "okay";
};
interrupts = <47>;
status = "disabled";
};
+
+ crypto_sram: sa-sram@ffffe000 {
+ compatible = "mmio-sram";
+ reg = <0xffffe000 0x800>;
+ clocks = <&gate_clk 15>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
};
};
#include "dra74x.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
/ {
model = "TI DRA742";
gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
};
- mmc2_3v3: fixedregulator-mmc2 {
+ evm_3v3_sw: fixedregulator-evm_3v3_sw {
compatible = "regulator-fixed";
- regulator-name = "mmc2_3v3";
+ regulator-name = "evm_3v3_sw";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&evm_3v3_sw>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
};
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DRA7xx-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ system-clock-frequency = <5644800>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&atl_clkin2_ck>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led@0 {
+ label = "dra7:usr1";
+ gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "dra7:usr2";
+ gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "dra7:usr3";
+ gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "dra7:usr4";
+ gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ USER1 {
+ label = "btnUser1";
+ linux,code = <BTN_0>;
+ gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+ };
+
+ USER2 {
+ label = "btnUser2";
+ linux,code = <BTN_1>;
+ gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&dra7_pmx_core {
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
>;
};
+
+ atl_pins: pinmux_atl_pins {
+ pinctrl-single,pins = <
+ 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
+ 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
+ >;
+ };
+
+ mcasp3_pins: pinmux_mcasp3_pins {
+ pinctrl-single,pins = <
+ 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
+ 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
+ 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
+ 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+ pinctrl-single,pins = <
+ 0x324 (MUX_MODE15)
+ 0x328 (MUX_MODE15)
+ 0x32c (MUX_MODE15)
+ 0x330 (MUX_MODE15)
+ >;
+ };
};
&i2c1 {
};
};
+ pcf_lcd: gpio@20 {
+ compatible = "nxp,pcf8575";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
pcf_gpio_21: gpio@21 {
compatible = "ti,pcf8575";
reg = <0x21>;
#interrupt-cells = <2>;
};
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&evm_3v3_sw>;
+ IOVDD-supply = <&evm_3v3_sw>;
+ DRVDD-supply = <&evm_3v3_sw>;
+ DVDD-supply = <&aic_dvdd>;
+ };
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
+
+ pcf_hdmi: gpio@26 {
+ compatible = "nxp,pcf8575";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ p1 {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
+ };
};
&i2c3 {
* SDCD signal is not being used here - using the fact that GPIO mode
* is always hardwired.
*/
- cd-gpios = <&gpio6 27 0>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
};
&mmc2 {
status = "okay";
- vmmc-supply = <&mmc2_3v3>;
+ vmmc-supply = <&evm_3v3_sw>;
bus-width = <8>;
};
pinctrl-1 = <&dcan1_pins_sleep>;
pinctrl-2 = <&dcan1_pins_default>;
};
+
+&atl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&atl_pins>;
+
+ assigned-clocks = <&abe_dpll_sys_clk_mux>,
+ <&atl_gfclk_mux>,
+ <&dpll_abe_ck>,
+ <&dpll_abe_m2x2_ck>,
+ <&atl_clkin2_ck>;
+ assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+ assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+ status = "okay";
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins>;
+ pinctrl-1 = <&mcasp3_sleep_pins>;
+
+ assigned-clocks = <&mcasp3_ahclkx_mux>;
+ assigned-clock-parents = <&atl_clkin2_ck>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ status = "okay";
+ };
+};
#thermal-sensor-cells = <1>;
};
+ dsp1_system: dsp_system@40d00000 {
+ compatible = "syscon";
+ reg = <0x40d00000 0x100>;
+ };
+
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
status = "disabled";
};
+ mmu0_dsp1: mmu@40d01000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x40d01000 0x100>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu0_dsp1";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+ status = "disabled";
+ };
+
+ mmu1_dsp1: mmu@40d02000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x40d02000 0x100>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu1_dsp1";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+ status = "disabled";
+ };
+
+ mmu_ipu1: mmu@58882000 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x58882000 0x100>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu_ipu1";
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ status = "disabled";
+ };
+
+ mmu_ipu2: mmu@55082000 {
+ compatible = "ti,dra7-iommu";
+ reg = <0x55082000 0x100>;
+ interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu_ipu2";
+ #iommu-cells = <0>;
+ ti,iommu-bus-err-back;
+ status = "disabled";
+ };
+
abb_mpu: regulator-abb-mpu {
compatible = "ti,abb-v3";
regulator-name = "abb_mpu";
status = "disabled";
};
+ mcasp3: mcasp@48468000 {
+ compatible = "ti,dra7-mcasp-audio";
+ ti,hwmods = "mcasp3";
+ reg = <0x48468000 0x2000>;
+ reg-names = "mpu";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+ dmas = <&sdma_xbar 133>, <&sdma_xbar 132>;
+ dma-names = "tx", "rx";
+ clocks = <&mcasp3_ahclkx_mux>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+
crossbar_mpu: crossbar@4a002a48 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
#include "dra72x.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/ti-dra7-atl.h>
/ {
model = "TI DRA722";
regulator-max-microvolt = <3300000>;
};
+ aic_dvdd: fixedregulator-aic_dvdd {
+ /* TPS77018DBVT */
+ compatible = "regulator-fixed";
+ regulator-name = "aic_dvdd";
+ vin-supply = <&evm_3v3>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
evm_3v3_sd: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sd";
};
};
};
+
+ sound0: sound@0 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DRA7xx-EVM";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Out",
+ "Microphone", "Mic Jack",
+ "Line", "Line In";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&sound0_master>;
+ simple-audio-card,frame-master = <&sound0_master>;
+ simple-audio-card,bitclock-inversion;
+
+ sound0_master: simple-audio-card,cpu {
+ sound-dai = <&mcasp3>;
+ system-clock-frequency = <5644800>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ clocks = <&atl_clkin2_ck>;
+ };
+ };
};
&dra7_pmx_core {
>;
};
+ i2c5_pins: pinmux_i2c5_pins {
+ pinctrl-single,pins = <
+ 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
+ 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
+ >;
+ };
+
nand_default: nand_default {
pinctrl-single,pins = <
0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
>;
};
+
+ atl_pins: pinmux_atl_pins {
+ pinctrl-single,pins = <
+ 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */
+ 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */
+ >;
+ };
+
+ mcasp3_pins: pinmux_mcasp3_pins {
+ pinctrl-single,pins = <
+ 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */
+ 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */
+ 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */
+ 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */
+ >;
+ };
+
+ mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
+ pinctrl-single,pins = <
+ 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15)
+ >;
+ };
};
&i2c1 {
output-low;
};
};
+
+ tlv320aic3106: tlv320aic3106@19 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x19>;
+ adc-settle-ms = <40>;
+ ai3x-micbias-vg = <1>; /* 2.0V */
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&evm_3v3>;
+ IOVDD-supply = <&evm_3v3>;
+ DRVDD-supply = <&evm_3v3>;
+ DVDD-supply = <&aic_dvdd>;
+ };
};
&i2c5 {
* VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
*/
lines-initial-states = <0x0f2b>;
+
+ p1 {
+ /* vin6_sel_s0: high: VIN6, low: audio */
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "vin6_sel_s0";
+ };
};
};
* SDCD signal is not being used here - using the fact that GPIO mode
* is a viable alternative
*/
- cd-gpios = <&gpio6 27 0>;
+ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
max-frequency = <192000000>;
};
};
};
};
+
+&atl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&atl_pins>;
+
+ assigned-clocks = <&abe_dpll_sys_clk_mux>,
+ <&atl_gfclk_mux>,
+ <&dpll_abe_ck>,
+ <&dpll_abe_m2x2_ck>,
+ <&atl_clkin2_ck>;
+ assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+ assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+ status = "okay";
+
+ atl2 {
+ bws = <DRA7_ATL_WS_MCASP2_FSX>;
+ aws = <DRA7_ATL_WS_MCASP3_FSX>;
+ };
+};
+
+&mcasp3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mcasp3_pins>;
+ pinctrl-1 = <&mcasp3_sleep_pins>;
+
+ assigned-clocks = <&mcasp3_ahclkx_mux>;
+ assigned-clock-parents = <&atl_clkin2_ck>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 1 2 0 0
+ >;
+};
+
+&mailbox5 {
+ status = "okay";
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ status = "okay";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ status = "okay";
+ };
+};
+
+&mailbox6 {
+ status = "okay";
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ status = "okay";
+ };
+};
<&dss_video1_clk>;
clock-names = "fck", "video1_clk";
};
+
+&mailbox5 {
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
+
+&mailbox6 {
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+};
};
ocp {
+ dsp2_system: dsp_system@41500000 {
+ compatible = "syscon";
+ reg = <0x41500000 0x100>;
+ };
+
omap_dwc3_4: omap_dwc3_4@48940000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss4";
dr_mode = "otg";
};
};
+
+ mmu0_dsp2: mmu@41501000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x41501000 0x100>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu0_dsp2";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+ status = "disabled";
+ };
+
+ mmu1_dsp2: mmu@41502000 {
+ compatible = "ti,dra7-dsp-iommu";
+ reg = <0x41502000 0x100>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "mmu1_dsp2";
+ #iommu-cells = <0>;
+ ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+ status = "disabled";
+ };
};
};
<&dss_video2_clk>;
clock-names = "fck", "video1_clk", "video2_clk";
};
+
+&mailbox5 {
+ mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
+
+&mailbox6 {
+ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+ ti,mbox-tx = <6 2 2>;
+ ti,mbox-rx = <4 2 2>;
+ status = "disabled";
+ };
+ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+ ti,mbox-tx = <5 2 2>;
+ ti,mbox-rx = <1 2 2>;
+ status = "disabled";
+ };
+};
};
i2c@4000a000 {
- efm32,location = <3>;
+ energymicro,location = <3>;
status = "ok";
temp@48 {
spi0: spi@4000c000 { /* USART0 */
cs-gpios = <&gpio 68 1>; // E4
- location = <1>;
+ energymicro,location = <1>;
status = "ok";
microsd@0 {
spi1: spi@4000c400 { /* USART1 */
cs-gpios = <&gpio 51 1>; // D3
- location = <1>;
+ energymicro,location = <1>;
status = "ok";
ks8851@0 {
};
uart4: uart@4000e400 { /* UART1 */
- location = <2>;
+ energymicro,location = <2>;
status = "ok";
};
soc {
adc: adc@40002000 {
- compatible = "efm32,adc";
+ compatible = "energymicro,efm32-adc";
reg = <0x40002000 0x400>;
interrupts = <7>;
clocks = <&cmu clk_HFPERCLKADC0>;
};
gpio: gpio@40006000 {
- compatible = "efm32,gpio";
+ compatible = "energymicro,efm32-gpio";
reg = <0x40006000 0x1000>;
interrupts = <1 11>;
gpio-controller;
i2c0: i2c@4000a000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,i2c";
+ compatible = "energymicro,efm32-i2c";
reg = <0x4000a000 0x400>;
interrupts = <9>;
clocks = <&cmu clk_HFPERCLKI2C0>;
i2c1: i2c@4000a400 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,i2c";
+ compatible = "energymicro,efm32-i2c";
reg = <0x4000a400 0x400>;
interrupts = <10>;
clocks = <&cmu clk_HFPERCLKI2C1>;
spi0: spi@4000c000 { /* USART0 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c000 0x400>;
interrupts = <3 4>;
clocks = <&cmu clk_HFPERCLKUSART0>;
spi1: spi@4000c400 { /* USART1 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c400 0x400>;
interrupts = <15 16>;
clocks = <&cmu clk_HFPERCLKUSART1>;
spi2: spi@4000c800 { /* USART2 */
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,spi";
+ compatible = "energymicro,efm32-spi";
reg = <0x4000c800 0x400>;
interrupts = <18 19>;
clocks = <&cmu clk_HFPERCLKUSART2>;
};
uart0: uart@4000c000 { /* USART0 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c000 0x400>;
interrupts = <3 4>;
clocks = <&cmu clk_HFPERCLKUSART0>;
};
uart1: uart@4000c400 { /* USART1 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>;
interrupts = <15 16>;
clocks = <&cmu clk_HFPERCLKUSART1>;
};
uart2: uart@4000c800 { /* USART2 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c800 0x400>;
interrupts = <18 19>;
clocks = <&cmu clk_HFPERCLKUSART2>;
};
uart3: uart@4000e000 { /* UART0 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000e000 0x400>;
interrupts = <20 21>;
clocks = <&cmu clk_HFPERCLKUART0>;
};
uart4: uart@4000e400 { /* UART1 */
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000e400 0x400>;
interrupts = <22 23>;
clocks = <&cmu clk_HFPERCLKUART1>;
};
timer0: timer@40010000 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010000 0x400>;
interrupts = <2>;
clocks = <&cmu clk_HFPERCLKTIMER0>;
};
timer1: timer@40010400 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010400 0x400>;
interrupts = <12>;
clocks = <&cmu clk_HFPERCLKTIMER1>;
};
timer2: timer@40010800 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010800 0x400>;
interrupts = <13>;
clocks = <&cmu clk_HFPERCLKTIMER2>;
};
timer3: timer@40010c00 {
- compatible = "efm32,timer";
+ compatible = "energymicro,efm32-timer";
reg = <0x40010c00 0x400>;
interrupts = <14>;
clocks = <&cmu clk_HFPERCLKTIMER3>;
regulator-name = "V_EMMC_2.8V-fixed";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
+ gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
regulator-name = "V_EMMC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo12_reg: LDO12 {
regulator-name = "V_EMMC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo13_reg: LDO13 {
i2c_max77836: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
vdd3-supply = <&ldo16_reg>;
vci-supply = <&ldo20_reg>;
- reset-gpios = <&gpe0 1 0>;
- te-gpios = <&gpx0 6 0>;
+ reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
power-on-delay= <30>;
power-off-delay= <120>;
reset-delay = <5>;
regulator-name = "V_EMMC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo12_reg: LDO12 {
regulator-name = "V_EMMC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
+ samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo13_reg: LDO13 {
interrupts = <0 52 0>;
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
+ dmas = <&pdma0 15>, <&pdma0 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <0 53 0>;
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
+ dmas = <&pdma1 15>, <&pdma1 16>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <0 54 0>;
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
+ dmas = <&pdma0 17>, <&pdma0 18>;
+ dma-names = "rx", "tx";
status = "disabled";
};
interrupts = <0 55 0>;
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
+ dmas = <&pdma1 17>, <&pdma1 18>;
+ dma-names = "rx", "tx";
status = "disabled";
};
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 0>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
up {
label = "Up";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "Down";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "Back";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
home {
label = "Home";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
menu {
label = "Menu";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
leds {
compatible = "gpio-leds";
status {
- gpios = <&gpx1 3 1>;
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
};
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
};
&spi_2 {
- cs-gpios = <&gpc1 2 0>;
+ cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
status = "okay";
w25x80@0 {
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Trats based on Exynos4210";
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
+ gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "TSP_FIXED_VOLTAGES";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpl0 3 0>;
+ gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "8M_AF_2.8V_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpk1 1 0>;
+ gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "CAM_IO_EN";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 1 0>;
+ gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "8M_1.2V_EN";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- gpio = <&gpe2 5 0>;
+ gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "VT_CORE_1.5V";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
- gpio = <&gpe2 2 0>;
+ gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
compatible = "gpio-keys";
vol-down-key {
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <114>;
label = "volume down";
debounce-interval = <10>;
};
vol-up-key {
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <115>;
label = "volume up";
debounce-interval = <10>;
};
power-key {
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "power";
debounce-interval = <10>;
};
ok-key {
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,code = <352>;
label = "ok";
debounce-interval = <10>;
compatible = "samsung,s6e8aa0";
vdd3-supply = <&vcclcd_reg>;
vci-supply = <&vlcd_reg>;
- reset-gpios = <&gpy4 5 0>;
+ reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
max8997,pmic-ignore-gpiodvs-side-effect;
max8997,pmic-buck125-default-dvs-idx = <0>;
- max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
- <&gpx0 6 0>,
- <&gpl0 0 0>;
+ max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+ <&gpx0 6 GPIO_ACTIVE_HIGH>,
+ <&gpl0 0 GPIO_ACTIVE_HIGH>;
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
<1250000>, <1200000>,
/dts-v1/;
#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Universal C210 based on Exynos4210 rev0";
regulator-name = "VMEM_VDD_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe1 3 0>;
+ gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
compatible = "gpio-keys";
vol-up-key {
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <115>;
label = "volume up";
debounce-interval = <1>;
};
vol-down-key {
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <114>;
label = "volume down";
debounce-interval = <1>;
};
config-key {
- gpios = <&gpx2 2 1>;
+ gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
linux,code = <171>;
label = "config";
debounce-interval = <1>;
};
camera-key {
- gpios = <&gpx2 3 1>;
+ gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
linux,code = <212>;
label = "camera";
debounce-interval = <1>;
};
power-key {
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "power";
debounce-interval = <1>;
};
ok-key {
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,code = <352>;
label = "ok";
debounce-interval = <1>;
regulator-name = "TSP_2_8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpe2 3 0>;
+ gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
#address-cells = <1>;
#size-cells = <0>;
- gpio-sck = <&gpy3 1 0>;
- gpio-mosi = <&gpy3 3 0>;
+ gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
- cs-gpios = <&gpy4 3 0>;
+ cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>;
lcd@0 {
compatible = "samsung,ld9040";
reg = <0>;
vdd3-supply = <&ldo7_reg>;
vci-supply = <&ldo17_reg>;
- reset-gpios = <&gpy4 5 0>;
+ reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
spi-max-frequency = <1200000>;
spi-cpol;
spi-cpha;
regulator-name = "HDMI_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpe0 1 0>;
+ gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
hdmi_ddc: i2c-ddc {
compatible = "i2c-gpio";
- gpios = <&gpe4 2 0 &gpe4 3 0>;
+ gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <100>;
#address-cells = <1>;
#size-cells = <0>;
};
&hdmi {
- hpd-gpio = <&gpx3 7 0>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
hdmi-en-supply = <&hdmi_en>;
compatible = "maxim,max8952";
reg = <0x60>;
- max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+ max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+ <&gpx0 4 GPIO_ACTIVE_HIGH>;
max8952,default-mode = <0>;
max8952,dvs-mode-microvolt = <1250000>, <1200000>,
<1050000>, <950000>;
reg = <0x66>;
max8998,pmic-buck1-default-dvs-idx = <0>;
- max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
- <&gpx0 6 0>;
+ max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+ <&gpx0 6 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
<1100000>, <1000000>;
max8998,pmic-buck2-default-dvs-idx = <0>;
- max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+ max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
regulators {
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
pinctrl-names = "default";
vmmc-supply = <&ldo5_reg>;
- cd-gpios = <&gpx3 4 0>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
cd-inverted;
status = "okay";
};
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/maxim,max77686.h>
#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
chosen {
power_key {
interrupt-parent = <&gpx1>;
interrupts = <3 0>;
- gpios = <&gpx1 3 1>;
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
debounce-interval = <10>;
pinctrl-0 = <&sd1_cd>;
pinctrl-names = "default";
compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpk1 2 1>;
+ reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
};
camera {
};
&hdmi {
- hpd-gpio = <&gpx3 7 0>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd>;
vdd-supply = <&ldo8_reg>;
};
&i2c_0 {
- pinctrl-0 = <&i2c0_bus>;
- pinctrl-names = "default";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <400000>;
status = "okay";
compatible = "smsc,usb3503";
reg = <0x08>;
- intn-gpios = <&gpx3 0 0>;
- connect-gpios = <&gpx3 4 0>;
- reset-gpios = <&gpx3 5 0>;
+ intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+ connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
initial-mode = <1>;
};
regulator-always-on;
};
- ldo8_reg: ldo@8 {
- regulator-compatible = "LDO8";
+ ldo8_reg: LDO8 {
regulator-name = "VDD10_HDMI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
- ldo10_reg: ldo@10 {
- regulator-compatible = "LDO10";
+ ldo10_reg: LDO10 {
regulator-name = "VDDQ_MIPIHSI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&i2c_1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_bus>;
status = "okay";
max98090: max98090@10 {
compatible = "maxim,max98090";
&i2c_2 {
status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_bus>;
};
&i2c_8 {
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
pinctrl-names = "default";
vmmc-supply = <&ldo4_reg &ldo21_reg>;
- cd-gpios = <&gpk2 2 0>;
+ cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
cd-inverted;
status = "okay";
};
compatible = "gpio-leds";
led1 {
label = "led1:heart";
- gpios = <&gpc1 0 1>;
+ gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
};
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 10000 0>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ cooling-levels = <0 102 170 230>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&cpu0 7 7>;
+ };
+ map1 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&cpu0 13 13>;
+ };
+ map2 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map3 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map4 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ };
+ };
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <0>;
+ status = "okay";
};
&usb3503 {
compatible = "gpio-leds";
led1 {
label = "led1:heart";
- gpios = <&gpc1 0 1>;
+ gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led2 {
label = "led2:mmc0";
- gpios = <&gpc1 2 1>;
+ gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "mmc0";
};
home_key {
interrupt-parent = <&gpx2>;
interrupts = <2 0>;
- gpios = <&gpx2 2 0>;
+ gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_HOME>;
label = "home key";
debounce-interval = <10>;
regulator-name = "p3v3_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpa1 1 1>;
+ gpio = <&gpa1 1 GPIO_ACTIVE_LOW>;
enable-active-high;
regulator-always-on;
};
/dts-v1/;
#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 0>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
s5m8767,pmic-buck-default-dvs-idx = <3>;
- s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
- s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
- <&gpm3 6 0>,
- <&gpm3 7 0>;
+ s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+ <&gpm3 6 GPIO_ACTIVE_HIGH>,
+ <&gpm3 7 GPIO_ACTIVE_HIGH>;
s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
<1200000>, <1200000>,
/dts-v1/;
#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "FriendlyARM TINY4412 board based on Exynos4412";
led1 {
label = "led1";
- gpios = <&gpm4 0 1>;
+ gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "heartbeat";
};
led2 {
label = "led2";
- gpios = <&gpm4 1 1>;
+ gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led3 {
label = "led3";
- gpios = <&gpm4 2 1>;
+ gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led4 {
label = "led4";
- gpios = <&gpm4 3 1>;
+ gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "mmc0";
};
regulator-name = "CAM_SENSOR_A";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpm0 2 0>;
+ gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "LCD_VDD_2.2V";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
- gpio = <&gpc0 1 0>;
+ gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "CAM_AF";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpm0 4 0>;
+ gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-name = "LED_A_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- gpio = <&gpj0 5 0>;
+ gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
compatible = "gpio-keys";
key-down {
- gpios = <&gpx3 3 1>;
+ gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
linux,code = <114>;
label = "volume down";
debounce-interval = <10>;
};
key-up {
- gpios = <&gpx2 2 1>;
+ gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
linux,code = <115>;
label = "volume up";
debounce-interval = <10>;
};
key-power {
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <116>;
label = "power";
debounce-interval = <10>;
};
key-ok {
- gpios = <&gpx0 1 1>;
+ gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
linux,code = <139>;
label = "ok";
debounce-inteval = <10>;
i2c_ak8975: i2c-gpio-0 {
compatible = "i2c-gpio";
- gpios = <&gpy2 4 0>, <&gpy2 5 0>;
+ gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
ak8975@0c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
- gpios = <&gpj0 7 0>;
+ gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
};
};
i2c_cm36651: i2c-gpio-2 {
compatible = "i2c-gpio";
- gpios = <&gpf0 0 1>, <&gpf0 1 1>;
+ gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
vdd3-supply = <&lcd_vdd3_reg>;
vci-supply = <&ldo25_reg>;
- reset-gpios = <&gpy4 5 0>;
+ reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
power-on-delay= <50>;
reset-delay = <100>;
init-delay = <100>;
clocks = <&camera 1>;
clock-names = "extclk";
samsung,camclk-out = <1>;
- gpios = <&gpm1 6 0>;
+ gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>;
port {
is_s5k6a3_ep: endpoint {
s5c73m3@3c {
compatible = "samsung,s5c73m3";
reg = <0x3c>;
- standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
- xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+ standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
+ xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
vdd-int-supply = <&buck9_reg>;
vddio-cis-supply = <&ldo9_reg>;
vdda-supply = <&ldo17_reg>;
#clock-cells = <1>;
voltage-regulators {
- ldo1_reg: ldo1 {
- regulator-compatible = "LDO1";
+ ldo1_reg: LDO1 {
regulator-name = "VALIVE_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- ldo2_reg: ldo2 {
- regulator-compatible = "LDO2";
+ ldo2_reg: LDO2 {
regulator-name = "VM1M2_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
};
- ldo3_reg: ldo3 {
- regulator-compatible = "LDO3";
+ ldo3_reg: LDO3 {
regulator-name = "VCC_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo4_reg: ldo4 {
- regulator-compatible = "LDO4";
+ ldo4_reg: LDO4 {
regulator-name = "VCC_2.8V_AP";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- ldo5_reg: ldo5 {
- regulator-compatible = "LDO5";
+ ldo5_reg: LDO5 {
regulator-name = "VCC_1.8V_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo6_reg: ldo6 {
- regulator-compatible = "LDO6";
+ ldo6_reg: LDO6 {
regulator-name = "VMPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
};
- ldo7_reg: ldo7 {
- regulator-compatible = "LDO7";
+ ldo7_reg: LDO7 {
regulator-name = "VPLL_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
};
- ldo8_reg: ldo8 {
- regulator-compatible = "LDO8";
+ ldo8_reg: LDO8 {
regulator-name = "VMIPI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
};
- ldo9_reg: ldo9 {
- regulator-compatible = "LDO9";
+ ldo9_reg: LDO9 {
regulator-name = "CAM_ISP_MIPI_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo10_reg: ldo10 {
- regulator-compatible = "LDO10";
+ ldo10_reg: LDO10 {
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
- ldo11_reg: ldo11 {
- regulator-compatible = "LDO11";
+ ldo11_reg: LDO11 {
regulator-name = "VABB1_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
};
};
- ldo12_reg: ldo12 {
- regulator-compatible = "LDO12";
+ ldo12_reg: LDO12 {
regulator-name = "VUOTG_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
};
- ldo13_reg: ldo13 {
- regulator-compatible = "LDO13";
+ ldo13_reg: LDO13 {
regulator-name = "NFC_AVDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo14_reg: ldo14 {
- regulator-compatible = "LDO14";
+ ldo14_reg: LDO14 {
regulator-name = "VABB2_1.95V";
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
};
};
- ldo15_reg: ldo15 {
- regulator-compatible = "LDO15";
+ ldo15_reg: LDO15 {
regulator-name = "VHSIC_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
};
- ldo16_reg: ldo16 {
- regulator-compatible = "LDO16";
+ ldo16_reg: LDO16 {
regulator-name = "VHSIC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
- ldo17_reg: ldo17 {
- regulator-compatible = "LDO17";
+ ldo17_reg: LDO17 {
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo18_reg: ldo18 {
- regulator-compatible = "LDO18";
+ ldo18_reg: LDO18 {
regulator-name = "CAM_ISP_SEN_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo19_reg: ldo19 {
- regulator-compatible = "LDO19";
+ ldo19_reg: LDO19 {
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo20_reg: ldo20 {
- regulator-compatible = "LDO20";
+ ldo20_reg: LDO20 {
regulator-name = "VDDQ_PRE_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo21_reg: ldo21 {
- regulator-compatible = "LDO21";
+ ldo21_reg: LDO21 {
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
};
- ldo22_reg: ldo22 {
- regulator-compatible = "LDO22";
+ ldo22_reg: LDO22 {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
- ldo23_reg: ldo23 {
- regulator-compatible = "LDO23";
+ ldo23_reg: LDO23 {
regulator-name = "TSP_AVDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- ldo24_reg: ldo24 {
- regulator-compatible = "LDO24";
+ ldo24_reg: LDO24 {
regulator-name = "TSP_VDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- ldo25_reg: ldo25 {
- regulator-compatible = "LDO25";
+ ldo25_reg: LDO25 {
regulator-name = "LCD_VCC_3.3V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
- ldo26_reg: ldo26 {
- regulator-compatible = "LDO26";
+ ldo26_reg: LDO26 {
regulator-name = "MOTOR_VCC_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
- buck1_reg: buck1 {
- regulator-compatible = "BUCK1";
+ buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1100000>;
};
};
- buck2_reg: buck2 {
- regulator-compatible = "BUCK2";
+ buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1500000>;
};
};
- buck3_reg: buck3 {
- regulator-compatible = "BUCK3";
+ buck3_reg: BUCK3 {
regulator-name = "vdd_int";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
};
};
- buck4_reg: buck4 {
- regulator-compatible = "BUCK4";
+ buck4_reg: BUCK4 {
regulator-name = "vdd_g3d";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
};
};
- buck5_reg: buck5 {
- regulator-compatible = "BUCK5";
+ buck5_reg: BUCK5 {
regulator-name = "VMEM_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- buck6_reg: buck6 {
- regulator-compatible = "BUCK6";
+ buck6_reg: BUCK6 {
regulator-name = "VCC_SUB_1.35V";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- buck7_reg: buck7 {
- regulator-compatible = "BUCK7";
+ buck7_reg: BUCK7 {
regulator-name = "VCC_SUB_2.0V";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
- buck8_reg: buck8 {
- regulator-compatible = "BUCK8";
+ buck8_reg: BUCK8 {
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
- buck9_reg: buck9 {
- regulator-compatible = "BUCK9";
+ buck9_reg: BUCK9 {
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
&sdhci_2 {
bus-width = <4>;
- cd-gpios = <&gpx3 4 0>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
cd-inverted;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
pinctrl-names = "default";
&spi_1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
- cs-gpios = <&gpb 5 0>;
+ cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
status = "okay";
s5c73m3_spi: s5c73m3 {
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
-};
-
-&fimd {
- status = "okay";
display-timings {
native-mode = <&timing0>;
};
};
+&fimd {
+ status = "okay";
+};
+
&hdmi {
hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
vdd_osc-supply = <&ldo10_reg>;
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
status = "okay";
-};
-
-&ehci {
- samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
- status = "okay";
display-timings {
native-mode = <&timing0>;
};
};
+&ehci {
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+};
+
&hdmi {
hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
};
--- /dev/null
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+ aliases {
+ i2c104 = &i2c_104;
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=tty1";
+ stdout-path = "serial3:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq &lid_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ vbat: vbat-fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat-supply";
+ regulator-boot-on;
+ };
+
+ i2c-arbitrator {
+ compatible = "i2c-arb-gpio-challenge";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c-parent = <&{/i2c@12CA0000}>;
+
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+ slew-delay-us = <10>;
+ wait-retry-us = <3000>;
+ wait-free-us = <50000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
+ /* Use ID 104 as a hint that we're on physical bus 4 */
+ i2c_104: i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,poll-retry-count = <1>;
+ };
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ wakeup-source;
+ };
+
+ power-regulator {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+
+ /*
+ * Config irq to disable internal pulls
+ * even though we run in polling mode.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65090_irq>;
+
+ vsys1-supply = <&vbat>;
+ vsys2-supply = <&vbat>;
+ vsys3-supply = <&vbat>;
+ infet1-supply = <&vbat>;
+ infet2-supply = <&vbat>;
+ infet3-supply = <&vbat>;
+ infet4-supply = <&vbat>;
+ infet5-supply = <&vbat>;
+ infet6-supply = <&vbat>;
+ infet7-supply = <&vbat>;
+ vsys-l1-supply = <&vbat>;
+ vsys-l2-supply = <&vbat>;
+
+ regulators {
+ dcdc1 {
+ ti,enable-ext-control;
+ };
+ dcdc2 {
+ ti,enable-ext-control;
+ };
+ dcdc3 {
+ ti,enable-ext-control;
+ };
+ fet1: fet1 {
+ regulator-name = "vcd_led";
+ ti,overcurrent-wait = <3>;
+ };
+ tps65090_fet2: fet2 {
+ regulator-name = "video_mid";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet3 {
+ regulator-name = "wwan_r";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet4 {
+ regulator-name = "sdcard";
+ ti,overcurrent-wait = <3>;
+ };
+ fet5 {
+ regulator-name = "camout";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ fet6: fet6 {
+ regulator-name = "lcd_vdd";
+ ti,overcurrent-wait = <3>;
+ };
+ tps65090_fet7: fet7 {
+ regulator-name = "video_mid_1a";
+ regulator-always-on;
+ ti,overcurrent-wait = <3>;
+ };
+ ldo1 {
+ };
+ ldo2 {
+ };
+ };
+
+ charger {
+ compatible = "ti,tps65090-charger";
+ };
+ };
+ };
+ };
+
+ sound {
+ samsung,i2s-controller = <&i2s0>;
+ };
+
+ usb3_vbus_reg: regulator-usb3 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5.0V_USB3CON";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_vbus_en>;
+ enable-active-high;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 1000000 0>;
+ brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+ power-supply = <&fet1>;
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ };
+
+ panel: panel {
+ compatible = "auo,b116xw03";
+ power-supply = <&fet6>;
+ backlight = <&backlight>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+
+ mmc3_pwrseq: mmc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
+ <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ clocks = <&max77686 MAX77686_CLK_PMIC>;
+ clock-names = "ext_clock";
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ port@0 {
+ dp_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+ };
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ max77686: max77686@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77686_irq>;
+ wakeup-source;
+ reg = <0x09>;
+ #clock-cells = <1>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ trackpad {
+ reg = <0x67>;
+ compatible = "cypress,cyapa";
+ interrupts = <2 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ };
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ ptn3460: lvds-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+ edid-emulation = <5>;
+
+ ports {
+ port@0 {
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+
+ port@1 {
+ bridge_in: endpoint {
+ remote-endpoint = <&dp_out>;
+ };
+ };
+ };
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
+ cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ mmc-pwrseq = <&mmc3_pwrseq>;
+};
+
+&pinctrl_0 {
+ wifi_en: wifi-en {
+ samsung,pins = "gpx0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ wifi_rst: wifi-rst {
+ samsung,pins = "gpx0-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max77686_irq: max77686-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+ cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdrd_dwc3 {
+ dr_mode = "host";
+};
+
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
+#include "cros-ec-keyboard.dtsi"
--- /dev/null
+/*
+ * Google Snow Rev 5+ board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5250-snow-common.dtsi"
+
+/ {
+ model = "Google Snow Rev 5+";
+ compatible = "google,snow-rev5", "samsung,exynos5250",
+ "samsung,exynos5";
+
+ sound {
+ compatible = "google,snow-audio-max98090";
+
+ samsung,model = "Snow-I2S-MAX98090";
+ samsung,audio-codec = <&max98090>;
+ };
+};
+
+&i2c_7 {
+ max98090: codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max98090_irq>;
+ };
+};
+
+&pinctrl_0 {
+ max98090_irq: max98090-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
*/
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include "exynos5250.dtsi"
+#include "exynos5250-snow-common.dtsi"
/ {
model = "Google Snow";
- compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
-
- aliases {
- i2c104 = &i2c_104;
- };
-
- memory {
- reg = <0x40000000 0x80000000>;
- };
-
- chosen {
- bootargs = "console=tty1";
- stdout-path = "serial3:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&power_key_irq &lid_irq>;
-
- power {
- label = "Power";
- gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- gpio-key,wakeup;
- };
-
- lid-switch {
- label = "Lid";
- gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <5>; /* EV_SW */
- linux,code = <0>; /* SW_LID */
- debounce-interval = <1>;
- gpio-key,wakeup;
- };
- };
-
- vbat: vbat-fixed-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vbat-supply";
- regulator-boot-on;
- };
-
- i2c-arbitrator {
- compatible = "i2c-arb-gpio-challenge";
- #address-cells = <1>;
- #size-cells = <0>;
-
- i2c-parent = <&{/i2c@12CA0000}>;
-
- our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
- their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
- slew-delay-us = <10>;
- wait-retry-us = <3000>;
- wait-free-us = <50000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
- /* Use ID 104 as a hint that we're on physical bus 4 */
- i2c_104: i2c@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- battery: sbs-battery@b {
- compatible = "sbs,sbs-battery";
- reg = <0xb>;
- sbs,poll-retry-count = <1>;
- };
-
- cros_ec: embedded-controller {
- compatible = "google,cros-ec-i2c";
- reg = <0x1e>;
- interrupts = <6 IRQ_TYPE_NONE>;
- interrupt-parent = <&gpx1>;
- pinctrl-names = "default";
- pinctrl-0 = <&ec_irq>;
- wakeup-source;
- };
-
- power-regulator {
- compatible = "ti,tps65090";
- reg = <0x48>;
-
- /*
- * Config irq to disable internal pulls
- * even though we run in polling mode.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&tps65090_irq>;
-
- vsys1-supply = <&vbat>;
- vsys2-supply = <&vbat>;
- vsys3-supply = <&vbat>;
- infet1-supply = <&vbat>;
- infet2-supply = <&vbat>;
- infet3-supply = <&vbat>;
- infet4-supply = <&vbat>;
- infet5-supply = <&vbat>;
- infet6-supply = <&vbat>;
- infet7-supply = <&vbat>;
- vsys-l1-supply = <&vbat>;
- vsys-l2-supply = <&vbat>;
-
- regulators {
- dcdc1 {
- ti,enable-ext-control;
- };
- dcdc2 {
- ti,enable-ext-control;
- };
- dcdc3 {
- ti,enable-ext-control;
- };
- fet1: fet1 {
- regulator-name = "vcd_led";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet2: fet2 {
- regulator-name = "video_mid";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet3 {
- regulator-name = "wwan_r";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet4 {
- regulator-name = "sdcard";
- ti,overcurrent-wait = <3>;
- };
- fet5 {
- regulator-name = "camout";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- fet6: fet6 {
- regulator-name = "lcd_vdd";
- ti,overcurrent-wait = <3>;
- };
- tps65090_fet7: fet7 {
- regulator-name = "video_mid_1a";
- regulator-always-on;
- ti,overcurrent-wait = <3>;
- };
- ldo1 {
- };
- ldo2 {
- };
- };
-
- charger {
- compatible = "ti,tps65090-charger";
- };
- };
- };
- };
+ compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
+ "samsung,exynos5";
sound {
compatible = "google,snow-audio-max98095";
samsung,model = "Snow-I2S-MAX98095";
- samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98095>;
};
-
- usb3_vbus_reg: regulator-usb3 {
- compatible = "regulator-fixed";
- regulator-name = "P5.0V_USB3CON";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_vbus_en>;
- enable-active-high;
- };
-
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <24000000>;
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm 0 1000000 0>;
- brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
- default-brightness-level = <7>;
- enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
- power-supply = <&fet1>;
- pinctrl-0 = <&pwm0_out>;
- pinctrl-names = "default";
- };
-
- panel: panel {
- compatible = "auo,b116xw03";
- power-supply = <&fet6>;
- backlight = <&backlight>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&bridge_out>;
- };
- };
- };
-
- mmc3_pwrseq: mmc3_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
- <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
- clocks = <&max77686 MAX77686_CLK_PMIC>;
- clock-names = "ext_clock";
- };
-};
-
-&cpu0 {
- cpu0-supply = <&buck2_reg>;
-};
-
-&dp {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
-
- ports {
- port@0 {
- dp_out: endpoint {
- remote-endpoint = <&bridge_in>;
- };
- };
- };
-};
-
-&ehci {
- samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
- status = "okay";
- samsung,invert-vclk;
-};
-
-&hdmi {
- hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- max77686: max77686@09 {
- compatible = "maxim,max77686";
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&max77686_irq>;
- wakeup-source;
- reg = <0x09>;
- #clock-cells = <1>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.8V_LDO_OUT2";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "P1.35V_BUCK_OUT6";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "P2.0V_BUCK_OUT7";
- regulator-min-microvolt = <2000000>;
- regulator-max-microvolt = <2000000>;
- regulator-always-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "P2.85V_BUCK_OUT8";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- };
- };
- };
-};
-
-&i2c_1 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- trackpad {
- reg = <0x67>;
- compatible = "cypress,cyapa";
- interrupts = <2 IRQ_TYPE_NONE>;
- interrupt-parent = <&gpx1>;
- wakeup-source;
- };
-};
-
-/*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
-&i2c2_bus {
- samsung,pin-pud = <0>;
-};
-
-&i2c_2 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
-};
-
-&i2c_3 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_4 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_5 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
};
&i2c_7 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-
- ptn3460: lvds-bridge@20 {
- compatible = "nxp,ptn3460";
- reg = <0x20>;
- powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
- edid-emulation = <5>;
-
- ports {
- port@0 {
- bridge_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-
- port@1 {
- bridge_in: endpoint {
- remote-endpoint = <&dp_out>;
- };
- };
- };
- };
-
max98095: codec@11 {
compatible = "maxim,max98095";
reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
pinctrl-names = "default";
+ pinctrl-0 = <&max98095_en>;
};
};
-&i2c_8 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <378000>;
-
- hdmiphy: hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
-};
-
-&i2s0 {
- status = "okay";
-};
-
-&mmc_0 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
-};
-
-&mmc_2 {
- status = "okay";
- num-slots = <1>;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- bus-width = <4>;
- wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
- cap-sd-highspeed;
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_3 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- cap-sdio-irq;
- keep-power-in-suspend;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
- bus-width = <4>;
- cap-sd-highspeed;
- mmc-pwrseq = <&mmc3_pwrseq>;
-};
-
&pinctrl_0 {
- wifi_en: wifi-en {
- samsung,pins = "gpx0-1";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- wifi_rst: wifi-rst {
- samsung,pins = "gpx0-2";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- power_key_irq: power-key-irq {
- samsung,pins = "gpx1-3";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
max98095_en: max98095-en {
samsung,pins = "gpx1-7";
samsung,pin-function = <0>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- max77686_irq: max77686-irq {
- samsung,pins = "gpx3-2";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- lid_irq: lid-irq {
- samsung,pins = "gpx3-5";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
-};
-
-&pinctrl_1 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
};
-
-&rtc {
- status = "okay";
- clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
- clock-names = "rtc", "rtc_src";
-};
-
-&sd3_bus4 {
- samsung,pin-drv = <0>;
-};
-
-&sd3_clk {
- samsung,pin-drv = <0>;
-};
-
-&sd3_cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
-};
-
-&spi_1 {
- status = "okay";
- samsung,spi-src-clk = <0>;
- num-cs = <1>;
- cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
-};
-
-&usbdrd_dwc3 {
- dr_mode = "host";
-};
-
-&usbdrd_phy {
- vbus-supply = <&usb3_vbus_reg>;
-};
-
-#include "cros-ec-keyboard.dtsi"
/dts-v1/;
#include "exynos5420.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
wakeup {
label = "SW-TACT1";
- gpios = <&gpx2 7 1>;
+ gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
regulator-name = "P5.0V_USB3CON0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 0 0>;
+ gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
regulator-name = "P5.0V_USB3CON1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 1 0>;
+ gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
samsung,color-depth = <1>;
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx2 6 0>;
+ samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
status = "okay";
num-cs = <1>;
samsung,spi-src-clk = <0>;
- cs-gpios = <&gpb1 2 0>;
+ cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
cros_ec: cros-ec@0 {
compatible = "google,cros-ec-spi";
pinctrl-0 = <&ec_spi_cs &ec_irq>;
reg = <0>;
spi-max-frequency = <3125000>;
+ google,has-vbc-nvram;
controller-data {
samsung,spi-feedback-delay = <1>;
/dts-v1/;
#include "exynos5420.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung SMDK5420 board based on EXYNOS5420";
regulator-name = "VBUS0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpg0 5 0>;
+ gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
regulator-name = "VBUS1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpg1 4 0>;
+ gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
status = "okay";
-};
-&fimd {
- status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing@0 {
};
};
+&fimd {
+ status = "okay";
+};
+
&hdmi {
status = "okay";
- hpd-gpio = <&gpx3 7 0>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
};
--- /dev/null
+/*
+ * Hardkernel Odroid XU3 Audio Codec device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ sound: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "Odroid-XU3";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speakers", "Speakers";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Headphone Jack", "MICBIAS",
+ "IN1", "Headphone Jack",
+ "Speakers", "SPKL",
+ "Speakers", "SPKR";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ system-clock-frequency = <19200000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&max98090>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ };
+ };
+};
+
+&hsi2c_5 {
+ status = "okay";
+ max98090: max98090@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 0>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
pinctrl-0 = <&emmc_nrst_pin>;
pinctrl-names = "default";
compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpd1 0 1>;
- };
-
- pwmleds {
- compatible = "pwm-leds";
-
- greenled {
- label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
- pwm-names = "pwm1";
- /*
- * Green LED is much brighter than the others
- * so limit its max brightness
- */
- max_brightness = <127>;
- linux,default-trigger = "mmc0";
- };
-
- blueled {
- label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
- pwm-names = "pwm2";
- max_brightness = <255>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpioleds {
- compatible = "gpio-leds";
- redled {
- label = "red:microSD";
- gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
- };
-
- sound: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,name = "Odroid-XU3";
- simple-audio-card,widgets =
- "Headphone", "Headphone Jack",
- "Speakers", "Speakers";
- simple-audio-card,routing =
- "Headphone Jack", "HPL",
- "Headphone Jack", "HPR",
- "Headphone Jack", "MICBIAS",
- "IN1", "Headphone Jack",
- "Speakers", "SPKL",
- "Speakers", "SPKR";
-
- simple-audio-card,format = "i2s";
- simple-audio-card,bitclock-master = <&link0_codec>;
- simple-audio-card,frame-master = <&link0_codec>;
-
- simple-audio-card,cpu {
- sound-dai = <&i2s0 0>;
- system-clock-frequency = <19200000>;
- };
-
- link0_codec: simple-audio-card,codec {
- sound-dai = <&max98090>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- };
+ reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
};
fan0: pwm-fan {
&hdmi {
status = "okay";
- hpd-gpio = <&gpx3 7 0>;
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_irq>;
s2mps11,buck2-ramp-enable = <1>;
s2mps11,buck3-ramp-enable = <1>;
s2mps11,buck4-ramp-enable = <1>;
+ samsung,s2mps11-acokb-ground;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
};
};
-&hsi2c_5 {
- status = "okay";
- max98090: max98090@10 {
- compatible = "maxim,max98090";
- reg = <0x10>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
- clocks = <&i2s0 CLK_I2S_CDCLK>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
- };
-};
-
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
};
};
-&i2s0 {
- status = "okay";
-};
-
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
};
};
-&pwm {
- /*
- * PWM 0 -- fan
- * PWM 1 -- Green LED
- * PWM 2 -- Blue LED
- * PWM 3 -- on MIPI connector for backlight
- */
- pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
- pinctrl-names = "default";
- status = "okay";
-};
-
&tmu_cpu0 {
vtmu-supply = <&ldo7_reg>;
status = "okay";
dr_mode = "host";
};
-&usbdrd_dwc3_1 {
- dr_mode = "otg";
-};
+/* usbdrd_dwc3_1 mode customized in each board */
&usbdrd3_0 {
vdd33-supply = <&ldo9_reg>;
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3 Lite";
compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
};
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
/ {
model = "Hardkernel Odroid XU3";
compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
};
&i2c_0 {
shunt-resistor = <10000>;
};
};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "otg";
+};
--- /dev/null
+/*
+ * Hardkernel Odroid XU4 board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+ model = "Hardkernel Odroid XU4";
+ compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
+ "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 2 -- Blue LED
+ */
+ pinctrl-0 = <&pwm0_out &pwm2_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <0>, <2>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
/dts-v1/;
#include "exynos5440.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
};
&pcie_0 {
- reset-gpio = <&pin_ctrl 5 0>;
+ reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&pcie_1 {
- reset-gpio = <&pin_ctrl 22 0>;
+ reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
status = "okay";
};
regulator-name = "P5.0V_USB3CON0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 0 0>;
+ gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb300_vbus_en>;
enable-active-high;
regulator-name = "P5.0V_USB3CON1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gph0 1 0>;
+ gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb301_vbus_en>;
enable-active-high;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx2 6 0>;
+ samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
panel = <&panel>;
};
status = "okay";
num-cs = <1>;
samsung,spi-src-clk = <0>;
- cs-gpios = <&gpb1 2 0>;
+ cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
cros_ec: cros-ec@0 {
compatible = "google,cros-ec-spi";
pinctrl-0 = <&ec_spi_cs &ec_irq>;
reg = <0>;
spi-max-frequency = <3125000>;
+ google,has-vbc-nvram;
controller-data {
samsung,spi-feedback-delay = <1>;
compatible = "hisilicon,hi3620-hi4511";
chosen {
- bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
+ bootargs = "root=/dev/ram0";
+ stdout-path = "serial0:115200n8";
};
memory {
compatible = "hisilicon,hix5hd2";
chosen {
- bootargs = "console=ttyAMA0,115200 earlyprintk";
+ stdout-path = "serial0:115200n8";
};
cpus {
#include "k2e.dtsi"
/ {
- compatible = "ti,k2e-evm","ti,keystone";
+ compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone";
model = "Texas Instruments Keystone 2 Edison EVM";
soc {
qalloc-by-id;
};
};
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ qalloc-by-id;
+ };
+ };
};
+
descriptor-regions {
#address-cells = <1>;
#size-cells = <1>;
link-index = <0x4000>;
};
};
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
}; /* qmss */
knav_dmas: knav_dmas@0 {
*/
/ {
+ compatible = "ti,k2e", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Edison SoC";
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
#include "k2hk.dtsi"
/ {
- compatible = "ti,k2hk-evm","ti,keystone";
+ compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
soc {
"region", "push", "pop";
};
};
+
queue-pools {
qpend {
qpend-0 {
qalloc-by-id;
};
};
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ qalloc-by-id;
+ };
+ };
};
+
descriptor-regions {
#address-cells = <1>;
#size-cells = <1>;
link-index = <0x4000>;
};
};
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
}; /* qmss */
knav_dmas: knav_dmas@0 {
*/
/ {
+ compatible = "ti,k2hk", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Kepler/Hawking SoC";
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
#include "k2l.dtsi"
/ {
- compatible = "ti,k2l-evm","ti,keystone";
+ compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
model = "Texas Instruments Keystone 2 Lamarr EVM";
soc {
qalloc-by-id;
};
};
+ accumulator {
+ acc-low-0 {
+ qrange = <480 32>;
+ accumulator = <0 47 16 2 50>;
+ interrupts = <0 226 0xf01>;
+ multi-queue;
+ };
+ };
};
+
descriptor-regions {
#address-cells = <1>;
#size-cells = <1>;
link-index = <0x4000>;
};
};
+
+ pdsps {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ pdsp0@0x2a10000 {
+ reg = <0x2a10000 0x1000 /*iram */
+ 0x2a0f000 0x100 /*reg*/
+ 0x2a0c000 0x3c8 /*intd */
+ 0x2a20000 0x4000>; /*cmd*/
+ id = <0>;
+ };
+ };
+
}; /* qmss */
knav_dmas: knav_dmas@0 {
*/
/ {
+ compatible = "ti,k2l", "ti,keystone";
+ model = "Texas Instruments Keystone 2 Lamarr SoC";
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
#include "skeleton.dtsi"
/ {
+ compatible = "ti,keystone";
model = "Texas Instruments Keystone 2 SoC";
#address-cells = <2>;
#size-cells = <2>;
};
spi0: spi@21000400 {
- compatible = "ti,dm6441-spi";
+ compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x21000400 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
};
spi1: spi@21000600 {
- compatible = "ti,dm6441-spi";
+ compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x21000600 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
};
spi2: spi@21000800 {
- compatible = "ti,dm6441-spi";
+ compatible = "ti,keystone-spi", "ti,dm6441-spi";
reg = <0x21000800 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */
- cesa: crypto@0301 {
- compatible = "marvell,orion-crypto";
- reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
- <MBUS_ID(0x03, 0x01) 0 0x800>;
- reg-names = "regs", "sram";
- interrupts = <22>;
- clocks = <&gate_clk 17>;
- status = "okay";
- };
-
nand: nand@012f {
#address-cells = <1>;
#size-cells = <1>;
pinctrl-names = "default";
status = "disabled";
};
+
+ crypto_sram: sa-sram@0301 {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>;
+ clocks = <&gate_clk 17>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
ocp@f1000000 {
status = "okay";
};
+ cesa: crypto@30000 {
+ compatible = "marvell,kirkwood-crypto";
+ reg = <0x30000 0x10000>;
+ reg-names = "regs";
+ interrupts = <22>;
+ clocks = <&gate_clk 17>;
+ marvell,crypto-srams = <&crypto_sram>;
+ marvell,crypto-sram-size = <0x800>;
+ status = "okay";
+ };
+
usb0: ehci@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
};
soc {
+ sct_pwm: pwm@40000000 {
+ compatible = "nxp,lpc1850-sct-pwm";
+ reg = <0x40000000 0x1000>;
+ clocks =<&ccu1 CLK_CPU_SCT>;
+ clock-names = "pwm";
+ resets = <&rgu 37>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ dmac: dma-controller@40002000 {
+ compatible = "arm,pl080", "arm,primecell";
+ arm,primecell-periphid = <0x00041080>;
+ reg = <0x40002000 0x1000>;
+ interrupts = <2>;
+ clocks = <&ccu1 CLK_CPU_DMA>;
+ clock-names = "apb_pclk";
+ resets = <&rgu 19>;
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <16>;
+ lli-bus-interface-ahb1;
+ lli-bus-interface-ahb2;
+ mem-bus-interface-ahb1;
+ mem-bus-interface-ahb2;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ };
+
+ spifi: flash-controller@40003000 {
+ compatible = "nxp,lpc1773-spifi";
+ reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+ reg-names = "spifi", "flash";
+ interrupts = <30>;
+ clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+ clock-names = "spifi", "reg";
+ resets = <&rgu 53>;
+ status = "disabled";
+ };
+
mmcsd: mmcsd@40004000 {
compatible = "snps,dw-mshc";
reg = <0x40004000 0x1000>;
num-slots = <1>;
clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
clock-names = "ciu", "biu";
+ resets = <&rgu 20>;
status = "disabled";
};
reg = <0x40006100 0x100>;
interrupts = <8>;
clocks = <&ccu1 CLK_CPU_USB0>;
+ resets = <&rgu 17>;
phys = <&usb0_otg_phy>;
phy-names = "usb";
has-transaction-translator;
reg = <0x40007100 0x100>;
interrupts = <9>;
clocks = <&ccu1 CLK_CPU_USB1>;
+ resets = <&rgu 18>;
status = "disabled";
};
reg = <0x40005000 0x1000>;
clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
clock-names = "mpmcclk", "apb_pclk";
+ resets = <&rgu 21>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x1c000000 0x1000000
interrupt-names = "combined";
clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
clock-names = "clcdclk", "apb_pclk";
+ resets = <&rgu 16>;
status = "disabled";
};
interrupt-names = "macirq";
clocks = <&ccu1 CLK_CPU_ETHERNET>;
clock-names = "stmmaceth";
+ resets = <&rgu 22>;
+ reset-names = "stmmaceth";
status = "disabled";
};
compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
reg = <0x40043000 0x1000>;
clocks = <&ccu1 CLK_CPU_CREG>;
+ resets = <&rgu 5>;
usb0_otg_phy: phy@004 {
compatible = "nxp,lpc1850-usb-otg-phy";
clocks = <&ccu1 CLK_USB0>;
#phy-cells = <0>;
};
+
+ dmamux: dma-mux@11c {
+ compatible = "nxp,lpc1850-dmamux";
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&dmac>;
+ };
};
cgu: clock-controller@40050000 {
"base_ssp0_clk", "base_sdio_clk";
};
+ rgu: reset-controller@40053000 {
+ compatible = "nxp,lpc1850-rgu";
+ reg = <0x40053000 0x1000>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "delay", "reg";
+ #reset-cells = <1>;
+ };
+
+ watchdog@40080000 {
+ compatible = "nxp,lpc1850-wwdt";
+ reg = <0x40080000 0x24>;
+ interrupts = <49>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+ clock-names = "wdtclk", "reg";
+ };
+
uart0: serial@40081000 {
compatible = "nxp,lpc1850-uart", "ns16550a";
reg = <0x40081000 0x1000>;
interrupts = <24>;
clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
clock-names = "uartclk", "reg";
+ resets = <&rgu 44>;
+ dmas = <&dmamux 1 1 2
+ &dmamux 2 1 2
+ &dmamux 11 2 2
+ &dmamux 12 2 2>;
+ dma-names = "tx", "rx", "tx", "rx";
status = "disabled";
};
interrupts = <25>;
clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
clock-names = "uartclk", "reg";
+ resets = <&rgu 45>;
+ dmas = <&dmamux 3 1 2
+ &dmamux 4 1 2>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <22>;
clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
clock-names = "sspclk", "apb_pclk";
+ resets = <&rgu 50>;
+ dmas = <&dmamux 9 0 2
+ &dmamux 10 0 2>;
+ dma-names = "rx", "tx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
interrupts = <12>;
clocks = <&ccu1 CLK_CPU_TIMER0>;
clock-names = "timerclk";
+ resets = <&rgu 32>;
};
timer1: timer@40085000 {
interrupts = <13>;
clocks = <&ccu1 CLK_CPU_TIMER1>;
clock-names = "timerclk";
+ resets = <&rgu 33>;
};
pinctrl: pinctrl@40086000 {
clocks = <&ccu1 CLK_CPU_SCU>;
};
+ i2c0: i2c@400a1000 {
+ compatible = "nxp,lpc1788-i2c";
+ reg = <0x400a1000 0x1000>;
+ interrupts = <18>;
+ clocks = <&ccu1 CLK_APB1_I2C0>;
+ resets = <&rgu 48>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
can1: can@400a4000 {
compatible = "bosch,c_can";
reg = <0x400a4000 0x1000>;
interrupts = <43>;
clocks = <&ccu1 CLK_APB1_CAN1>;
+ resets = <&rgu 54>;
status = "disabled";
};
interrupts = <26>;
clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
clock-names = "uartclk", "reg";
+ resets = <&rgu 46>;
+ dmas = <&dmamux 5 1 2
+ &dmamux 6 1 2>;
+ dma-names = "tx", "rx";
status = "disabled";
};
interrupts = <27>;
clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
clock-names = "uartclk", "reg";
+ resets = <&rgu 47>;
+ dmas = <&dmamux 7 1 2
+ &dmamux 8 1 2
+ &dmamux 13 3 2
+ &dmamux 14 3 2>;
+ dma-names = "tx", "rx", "rx", "tx";
status = "disabled";
};
interrupts = <14>;
clocks = <&ccu1 CLK_CPU_TIMER2>;
clock-names = "timerclk";
+ resets = <&rgu 34>;
};
timer3: timer@400c4000 {
interrupts = <15>;
clocks = <&ccu1 CLK_CPU_TIMER3>;
clock-names = "timerclk";
+ resets = <&rgu 35>;
};
ssp1: spi@400c5000 {
interrupts = <23>;
clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
clock-names = "sspclk", "apb_pclk";
+ resets = <&rgu 51>;
+ dmas = <&dmamux 11 2 2
+ &dmamux 12 2 2
+ &dmamux 3 3 2
+ &dmamux 4 3 2
+ &dmamux 5 2 2
+ &dmamux 6 2 2
+ &dmamux 13 2 2
+ &dmamux 14 2 2>;
+ dma-names = "rx", "tx", "tx", "rx",
+ "tx", "rx", "rx", "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@400e0000 {
+ compatible = "nxp,lpc1788-i2c";
+ reg = <0x400e0000 0x1000>;
+ interrupts = <19>;
+ clocks = <&ccu1 CLK_APB3_I2C1>;
+ resets = <&rgu 49>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
reg = <0x400e2000 0x1000>;
interrupts = <51>;
clocks = <&ccu1 CLK_APB3_CAN0>;
+ resets = <&rgu 55>;
status = "disabled";
};
#include "lpc18xx.dtsi"
#include "lpc4350.dtsi"
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
/ {
model = "Hitex LPC4350 Evaluation Board";
compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
device_type = "memory";
reg = <0x28000000 0x800000>; /* 8 MB */
};
+
+ pca_buttons {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+ autorepeat;
+
+ button@0 {
+ label = "joy:right";
+ linux,code = <KEY_RIGHT>;
+ gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ button@1 {
+ label = "joy:up";
+ linux,code = <KEY_UP>;
+ gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+
+ button@2 {
+ label = "joy:enter";
+ linux,code = <KEY_ENTER>;
+ gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+
+ button@3 {
+ label = "joy:left";
+ linux,code = <KEY_LEFT>;
+ gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ button@4 {
+ label = "joy:down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+
+ button@5 {
+ label = "user:sw3";
+ linux,code = <KEY_F1>;
+ gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ button@6 {
+ label = "user:sw4";
+ linux,code = <KEY_F2>;
+ gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ button@7 {
+ label = "user:sw5";
+ linux,code = <KEY_F3>;
+ gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ pca_leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "ext:led0";
+ gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led1 {
+ label = "ext:led1";
+ gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ led2 {
+ label = "ext:led2";
+ gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led3 {
+ label = "ext:led3";
+ gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&pinctrl {
};
};
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ spifi_pins: spifi-pins {
+ spifi_clk_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_mosi_miso_sio2_3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+ };
+
uart0_pins: uart0-pins {
uart0_rx_cfg {
pins = "pf_11";
clock-frequency = <25000000>;
};
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ sensor@18 {
+ compatible = "nxp,jc42";
+ reg = <0x18>;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,24c02";
+ reg = <0x50>;
+ };
+
+ pca_gpio: gpio@24 {
+ compatible = "nxp,pca9673";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
&mac {
status = "okay";
phy-mode = "mii";
pinctrl-0 = <&enet_mii_pins>;
};
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x000000 0x040000>; /* 256 KiB */
+ };
+
+ partition@1 {
+ label = "kernel";
+ reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+ };
+
+ partition@2 {
+ label = "rootfs";
+ reg = <0x300000 0x500000>; /* 5 MiB */
+ };
+ };
+};
+
&uart0 {
status = "okay";
pinctrl-names = "default";
};
};
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
sdmmc_pins: sdmmc-pins {
sdmmc_clk_cfg {
pins = "pc_0";
};
};
+ spifi_pins: spifi-pins {
+ spifi_clk_cfg {
+ pins = "p3_3";
+ function = "spifi";
+ slew-rate = <1>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_mosi_miso_sio2_3_cfg {
+ pins = "p3_7", "p3_6", "p3_5", "p3_4";
+ function = "spifi";
+ slew-rate = <0>;
+ bias-disable;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ spifi_cs_cfg {
+ pins = "p3_8";
+ function = "spifi";
+ bias-disable;
+ };
+ };
+
+ ssp0_pins: ssp0-pins {
+ ssp0_sck_miso_mosi {
+ pins = "pf_0", "pf_2", "pf_3";
+ function = "ssp0";
+ slew-rate = <1>;
+ bias-pull-down;
+ input-enable;
+ input-schmitt-disable;
+ };
+
+ ssp0_ssel {
+ pins = "pf_1";
+ function = "ssp0";
+ bias-pull-up;
+ };
+ };
+
uart0_pins: uart0-pins {
uart0_rx_cfg {
pins = "pf_11";
};
};
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ lm75@48 {
+ compatible = "nxp,lm75";
+ reg = <0x48>;
+ };
+
+ eeprom@57 {
+ compatible = "microchip,24c64";
+ reg = <0x57>;
+ };
+};
+
&emc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pins>;
};
+&spifi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spifi_pins>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-cpol;
+ spi-cpha;
+ spi-rx-bus-width = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "data";
+ reg = <0 0x200000>;
+ };
+ };
+};
+
+&ssp0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp0_pins>;
+ num-cs = <1>;
+};
+
&uart0 {
status = "okay";
pinctrl-names = "default";
--- /dev/null
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+
+/ {
+ model = "TRONFY MXQ S805";
+ compatible = "tronfy,mxq", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--- /dev/null
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "meson8b.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-C1";
+ compatible = "hardkernel,odroid-c1", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
--- /dev/null
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x200>;
+ };
+
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x201>;
+ };
+
+ cpu@202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x202>;
+ };
+
+ cpu@203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ next-level-cache = <&L2>;
+ reg = <0x203>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ L2: l2-cache-controller@c4200000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xc4200000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ gic: interrupt-controller@c4301000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0xc4301000 0x1000>,
+ <0xc4300100 0x0100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ timer@c1109940 {
+ compatible = "amlogic,meson6-timer";
+ reg = <0xc1109940 0x18>;
+ interrupts = <0 10 1>;
+ };
+
+ uart_AO: serial@c81004c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc81004c0 0x18>;
+ interrupts = <0 90 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ uart_A: serial@c11084c0 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc11084c0 0x18>;
+ interrupts = <0 26 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ uart_B: serial@c11084dc {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc11084dc 0x18>;
+ interrupts = <0 75 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ uart_C: serial@c1108700 {
+ compatible = "amlogic,meson-uart";
+ reg = <0xc1108700 0x18>;
+ interrupts = <0 93 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ status = "disabled";
+ };
+
+ clkc: clock-controller@c1104000 {
+ #clock-cells = <1>;
+ compatible = "amlogic,meson8b-clkc";
+ reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
+ };
+
+ pinctrl: pinctrl@c1109880 {
+ compatible = "amlogic,meson8b-pinctrl";
+ reg = <0xc1109880 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio: banks@c11080b0 {
+ reg = <0xc11080b0 0x28>,
+ <0xc11080e8 0x18>,
+ <0xc1108120 0x18>,
+ <0xc1108030 0x38>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_ao: ao-bank@c1108030 {
+ reg = <0xc8100014 0x4>,
+ <0xc810002c 0x4>,
+ <0xc8100024 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+ };
+ };
+}; /* end of / */
ocp {
i2c@0 {
compatible = "i2c-cbus-gpio";
- gpios = <&gpio3 2 0 /* gpio66 clk */
- &gpio3 1 0 /* gpio65 dat */
- &gpio3 0 0 /* gpio64 sel */
+ gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
+ &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
+ &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
>;
#address-cells = <1>;
#size-cells = <0>;
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
interrupt-parent = <&gpio2>;
interrupts = <25 0>; /* gpio_57 */
- pendown-gpio = <&gpio2 25 0>;
+ pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
interrupt-parent = <&gpio1>;
interrupts = <27 0>; /* gpio_27 */
- pendown-gpio = <&gpio1 27 0>;
+ pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 22 0>; /* gpio150 */
+ gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
startup-delay-us = <70000>;
enable-active-high;
vin-supply = <&vmmc2>;
tsc2046@0 {
interrupt-parent = <&gpio6>;
interrupts = <15 0>; /* gpio175 */
- pendown-gpio = <&gpio6 15 0>;
+ pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&spi_gpio_pins>;
- gpio-sck = <&gpio1 12 0>;
- gpio-miso = <&gpio1 18 0>;
- gpio-mosi = <&gpio1 20 0>;
- cs-gpios = <&gpio1 19 0>;
+ gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
/* lcd panel */
tv_amp: opa362 {
compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 0>;
+ enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
model = "Goldelico GTA04A5";
sound {
- ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */
+ ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
};
};
&omap3_pmx_core {
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
- 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
>;
};
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
- 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
- 0x10e (PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
- 0x110 (PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
- 0x112 (PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
- 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
- 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
- 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
>;
};
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
- 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
- 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
>;
};
};
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
- };
+ };
};
};
};
};
&mmc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
- vmmc-supply = <&vmmc1>;
- vmmc_aux-supply = <&vsim>;
- bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <4>;
};
&mmc3 {
};
&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
};
&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
};
&twl_gpio {
OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
>;
};
-
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
- OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
- OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
- OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- >;
- };
};
/* On board Wifi module */
tsc2046@0 {
interrupt-parent = <&gpio2>;
interrupts = <22 0>; /* gpio54 */
- pendown-gpio = <&gpio2 22 0>;
+ pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
};
};
};
&mmc1 {
- cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+ cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
cd-inverted;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
interrupt-parent = <&gpio1>;
interrupts = <8 0>; /* boot6 / gpio_8 */
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio1 8 0>;
+ pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
vcc-supply = <®_vcc3>;
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
status = "okay";
bus-width = <4>;
vmmc-supply = <&vmmc1>;
- cd-gpios = <&gpio6 4 0>; /* gpio_164 */
- wp-gpios = <&gpio6 3 0>; /* gpio_163 */
+ cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164 */
+ wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* gpio_163 */
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
ti,dual-volt;
regulator-name = "VEMMC";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
- gpio = <&gpio5 29 0>; /* gpio line 157 */
+ gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
startup-delay-us = <150>;
enable-active-high;
};
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio6 8 0>; /* gpio_168: vbus enable */
+ gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; /* gpio_168: vbus enable */
startup-delay-us = <70000>;
enable-active-high;
};
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 0>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 0>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio6 4 0>; /* GPIO_164 */
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
};
/* wg7210 (wifi+bt module) 32k clock buffer */
pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio3>;
interrupts = <30 0>; /* GPIO_94 */
- pendown-gpio = <&gpio3 30 0>;
+ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
vcc-supply = <&vaux4>;
ti,x-min = /bits/ 16 <0>;
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
- cd-gpios = <&twl_gpio 0 0>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio4 5 0>; /* gpio101 */
+ gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
startup-delay-us = <70000>;
enable-active-high;
};
regulator-name = "hsusb1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 1 0>; /* gpio_1 */
+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
startup-delay-us = <70000>;
enable-active-high;
/*
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 11 0>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 16 0>; /* gpio line 48 */
+ gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
enable-active-high;
regulator-boot-on;
};
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 22 0>;
+ gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+ ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 11 0>; /* gpio 43 */
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */
startup-delay-us = <70000>;
enable-active-high;
};
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
+ ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
0x4a002378 0x18>;
compatible = "ti,omap4460-bandgap";
interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
- gpios = <&gpio3 22 0>; /* tshut */
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
#thermal-sensor-cells = <0>;
};
interrupt-parent = <&gpio1>;
interrupts = <15 0>; /* gpio1_wk15 */
- pendown-gpio = <&gpio1 15 0>;
+ pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
pinctrl-0 = <&twl6040_pins>;
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
+ ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
vio-supply = <&smps7_reg>;
v2v1-supply = <&smps9_reg>;
status = "disabled";
};
+ cesa: crypto@90000 {
+ compatible = "marvell,orion-crypto";
+ reg = <0x90000 0x10000>;
+ reg-names = "regs";
+ interrupts = <28>;
+ marvell,crypto-srams = <&crypto_sram>;
+ marvell,crypto-sram-size = <0x800>;
+ status = "okay";
+ };
+
ehci1: ehci@a0000 {
compatible = "marvell,orion-ehci";
reg = <0xa0000 0x1000>;
};
};
- cesa: crypto@90000 {
- compatible = "marvell,orion-crypto";
- reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
- <MBUS_ID(0x09, 0x00) 0x0 0x800>;
- reg-names = "regs", "sram";
- interrupts = <28>;
- status = "okay";
+ crypto_sram: sa-sram {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
};
};
#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "CompuLab CM-QS600";
stdout-path = "serial0:115200n8";
};
+ pwrseq {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ sdcc4_pwrseq: sdcc4_pwrseq {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_gpios>;
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+ };
+ };
+
soc {
pinctrl@800000 {
- i2c1_pins: i2c1 {
+ card_detect: card_detect {
mux {
- pins = "gpio20", "gpio21";
- function = "gsbi1";
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
};
};
};
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
- eeprom: eeprom@50 {
+ eeprom@50 {
compatible = "24c02";
reg = <0x50>;
pagesize = <32>;
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi7_uart_2pins>;
};
};
regulator-always-on;
};
+ qcom,ssbi@500000 {
+ pmic@0 {
+ gpio@150 {
+ wlan_default_gpios: wlan-gpios {
+ pios {
+ pins = "gpio43";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8921_GPIO_S4>;
+ };
+ };
+ };
+ };
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
sdcc3: sdcc@12180000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&card_detect>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
};
/* WLAN */
sdcc4: sdcc@121c0000 {
status = "okay";
vmmc-supply = <&v3p3_fixed>;
vqmmc-supply = <&v3p3_fixed>;
+ mmc-pwrseq = <&sdcc4_pwrseq>;
};
};
};
#include "qcom-apq8064-v2.0.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
model = "Qualcomm APQ8064/IFC6410";
stdout-path = "serial0:115200n8";
};
+ pwrseq {
+ compatible = "simple-bus";
+
+ sdcc4_pwrseq: sdcc4_pwrseq {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_gpios>;
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <¬ify_led>;
+
+ led@1 {
+ label = "apq8064:green:user1";
+ gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
soc {
pinctrl@800000 {
card_detect: card_detect {
qcom,mode = <GSBI_PROT_I2C>;
i2c3: i2c@16280000 {
status = "okay";
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "default";
};
};
i2c@12460000 {
status = "okay";
clock-frequency = <200000>;
- pinctrl-0 = <&i2c1_pins>;
- pinctrl-names = "default";
- eeprom: eeprom@52 {
+ eeprom@52 {
compatible = "atmel,24c128";
reg = <0x52>;
pagesize = <32>;
serial@16540000 {
status = "ok";
-
pinctrl-names = "default";
- pinctrl-0 = <&uart_pins>;
+ pinctrl-0 = <&gsbi6_uart_4pins>;
};
};
qcom,mode = <GSBI_PROT_I2C_UART>;
serial@16640000 {
status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi7_uart_2pins>;
};
};
status = "okay";
};
+ qcom,ssbi@500000 {
+ pmic@0 {
+ gpio@150 {
+ wlan_default_gpios: wlan-gpios {
+ pios {
+ pins = "gpio43";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8921_GPIO_S4>;
+ };
+ };
+
+ notify_led: nled {
+ pios {
+ pins = "gpio18";
+ function = "normal";
+ bias-disable;
+ power-source = <PM8921_GPIO_S4>;
+ };
+ };
+ };
+ };
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
status = "okay";
vmmc-supply = <&ext_3p3v>;
vqmmc-supply = <&pm8921_lvs1>;
+ mmc-pwrseq = <&sdcc4_pwrseq>;
};
};
};
};
};
- uart_pins: uart_pins {
+ gsbi6_uart_2pins: gsbi6_uart_2pins {
+ mux {
+ pins = "gpio14", "gpio15";
+ function = "gsbi6";
+ };
+ };
+
+ gsbi6_uart_4pins: gsbi6_uart_4pins {
mux {
pins = "gpio14", "gpio15", "gpio16", "gpio17";
function = "gsbi6";
};
};
+
+ gsbi7_uart_2pins: gsbi7_uart_2pins {
+ mux {
+ pins = "gpio82", "gpio83";
+ function = "gsbi7";
+ };
+ };
+
+ gsbi7_uart_4pins: gsbi7_uart_4pins {
+ mux {
+ pins = "gpio82", "gpio83", "gpio84", "gpio85";
+ function = "gsbi7";
+ };
+ };
};
intc: interrupt-controller@2000000 {
i2c1: i2c@12460000 {
compatible = "qcom,i2c-qup-v1.1.1";
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
reg = <0x12460000 0x1000>;
interrupts = <0 194 IRQ_TYPE_NONE>;
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
ranges;
i2c3: i2c@16280000 {
compatible = "qcom,i2c-qup-v1.1.1";
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
reg = <0x16280000 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
clocks = <&gcc GSBI3_QUP_CLK>,
<136 1>, <137 1>, <138 1>, <139 1>;
};
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
+ interrupt-parent = <&pmicintc>;
+ interrupts = <39 1>;
+ reg = <0x11d>;
+ allow-set-time;
+ };
+
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
};
};
compatible = "qcom,gcc-apq8084";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
};
clock-frequency = <19200000>;
};
+ smem {
+ compatible = "qcom,smem";
+
+ memory-region = <&smem_region>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
<0xf9002000 0x1000>;
};
+ apcs: syscon@f9011000 {
+ compatible = "syscon";
+ reg = <0xf9011000 0x1000>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,gcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
};
compatible = "qcom,mmcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfd8c0000 0x6000>;
};
#hwlock-cells = <1>;
};
- smem@fa00000 {
- compatible = "qcom,smem";
-
- memory-region = <&smem_region>;
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
-
- hwlocks = <&tcsr_mutex 3>;
};
blsp1_uart2: serial@f991e000 {
};
blsp_i2c11: i2c@f9967000 {
- status = "disable";
+ status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9967000 0x1000>;
interrupts = <0 105 IRQ_TYPE_NONE>;
#interrupt-cells = <4>;
};
};
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ pm8841-regulators {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {};
+ pm8841_s2: s2 {};
+ pm8841_s3: s3 {};
+ pm8841_s4: s4 {};
+ pm8841_s5: s5 {};
+ pm8841_s6: s6 {};
+ pm8841_s7: s7 {};
+ pm8841_s8: s8 {};
+ };
+
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ pm8941_s1: s1 {};
+ pm8941_s2: s2 {};
+ pm8941_s3: s3 {};
+ pm8941_5v: s4 {};
+
+ pm8941_l1: l1 {};
+ pm8941_l2: l2 {};
+ pm8941_l3: l3 {};
+ pm8941_l4: l4 {};
+ pm8941_l5: l5 {};
+ pm8941_l6: l6 {};
+ pm8941_l7: l7 {};
+ pm8941_l8: l8 {};
+ pm8941_l9: l9 {};
+ pm8941_l10: l10 {};
+ pm8941_l11: l11 {};
+ pm8941_l12: l12 {};
+ pm8941_l13: l13 {};
+ pm8941_l14: l14 {};
+ pm8941_l15: l15 {};
+ pm8941_l16: l16 {};
+ pm8941_l17: l17 {};
+ pm8941_l18: l18 {};
+ pm8941_l19: l19 {};
+ pm8941_l20: l20 {};
+ pm8941_l21: l21 {};
+ pm8941_l22: l22 {};
+ pm8941_l23: l23 {};
+ pm8941_l24: l24 {};
+
+ pm8941_lvs1: lvs1 {};
+ pm8941_lvs2: lvs2 {};
+ pm8941_lvs3: lvs3 {};
+
+ pm8941_5vs1: 5vs1 {};
+ pm8941_5vs2: 5vs2 {};
+ };
+ };
+ };
+ };
};
bias-pull-up;
};
+ charger@1000 {
+ compatible = "qcom,pm8941-charger";
+ reg = <0x1000 0x700>;
+ interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid";
+ };
+
pm8941_gpios: gpios@c000 {
compatible = "qcom,pm8941-gpio";
reg = <0xc000 0x2400>;
pm8941_iadc: iadc@3600 {
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
- reg = <0x3600 0x100>,
- <0x12f1 0x1>;
+ reg = <0x3600 0x100>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
};
+++ /dev/null
-/*
- * Reference Device Tree Source for the Bock-W board
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7778.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "bockw";
- compatible = "renesas,bockw-reference", "renesas,r8a7778";
-
- aliases {
- serial0 = &scif0;
- };
-
- chosen {
- bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
- stdout-path = &scif0;
- };
-
- memory {
- device_type = "memory";
- reg = <0x60000000 0x10000000>;
- };
-
- fixedregulator3v3: fixedregulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- ethernet@18300000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x18300000 0x1000>;
-
- phy-mode = "mii";
- interrupt-parent = <&irqpin>;
- interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
- reg-io-width = <4>;
- vddvario-supply = <&fixedregulator3v3>;
- vdd33a-supply = <&fixedregulator3v3>;
- };
-
-};
-
-&mmcif {
- pinctrl-0 = <&mmc_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&fixedregulator3v3>;
- bus-width = <8>;
- broken-cd;
- status = "okay";
-};
-
-&irqpin {
- status = "okay";
-};
-
-&tmu0 {
- status = "okay";
-};
-
-&pfc {
- scif0_pins: serial0 {
- renesas,groups = "scif0_data_a", "scif0_ctrl";
- renesas,function = "scif0";
- };
-
- mmc_pins: mmc {
- renesas,groups = "mmc_data8", "mmc_ctrl";
- renesas,function = "mmc";
- };
-
- sdhi0_pins: sd0 {
- renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
- "sdhi0_cd";
- renesas,function = "sdhi0";
- };
-
- hspi0_pins: hspi0 {
- renesas,groups = "hspi0_a";
- renesas,function = "hspi0";
- };
-};
-
-&sdhi0 {
- pinctrl-0 = <&sdhi0_pins>;
- pinctrl-names = "default";
-
- vmmc-supply = <&fixedregulator3v3>;
- bus-width = <4>;
- status = "okay";
- wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-};
-
-&hspi0 {
- pinctrl-0 = <&hspi0_pins>;
- pinctrl-names = "default";
- status = "okay";
-
- flash: flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spansion,s25fl008k", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- m25p,fast-read;
-
- partition@0 {
- label = "data(spi)";
- reg = <0x00000000 0x00100000>;
- };
- };
-};
-
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1";
reg = <0xffd90000 0x1000>, /* SRU */
- <0xffd91000 0x1240>, /* SSI */
+ <0xffd91000 0x240>, /* SSI */
<0xfffe0000 0x24>; /* ADG */
clocks = <&mstp3_clks R8A7778_CLK_SSI8>,
<&mstp3_clks R8A7778_CLK_SSI7>,
compatible = "renesas,marzen", "renesas,r8a7779";
aliases {
- serial2 = &scif2;
- serial4 = &scif4;
+ serial0 = &scif2;
+ serial1 = &scif4;
};
chosen {
- bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
+ bootargs = "ignore_loglevel root=/dev/nfs ip=on";
stdout-path = &scif2;
};
1800000 0>;
};
+ audio_clock: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-output-names = "audio_clock";
+ };
+
rsnd_ak4643: sound {
compatible = "simple-audio-card";
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4643>;
- system-clock-frequency = <11289600>;
+ clocks = <&audio_clock>;
};
};
renesas,function = "msiof1";
};
+ iic0_pins: iic0 {
+ renesas,groups = "iic0";
+ renesas,function = "iic0";
+ };
+
iic1_pins: iic1 {
renesas,groups = "iic1";
renesas,function = "iic1";
&iic0 {
status = "okay";
+ pinctrl-0 = <&iic0_pins>;
+ pinctrl-names = "default";
};
&iic1 {
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x1280>, /* SSI */
+ <0 0xec541000 0 0x280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
1800000 0>;
};
+ audio_clock: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-output-names = "audio_clock";
+ };
+
rsnd_ak4643: sound {
compatible = "simple-audio-card";
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4643>;
- system-clock-frequency = <11289600>;
+ clocks = <&audio_clock>;
};
};
--- /dev/null
+/*
+ * Device Tree Source for the Porter board
+ *
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Porter";
+ compatible = "renesas,porter", "renesas,r8a7791";
+
+ aliases {
+ serial0 = &scif0;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ memory@200000000 {
+ device_type = "memory";
+ reg = <2 0x00000000 0 0x40000000>;
+ };
+
+ vcc_sdhi0: regulator@0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccq_sdhi0: regulator@1 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ vcc_sdhi2: regulator@2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccq_sdhi2: regulator@3 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI2 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&pfc {
+ scif0_pins: serial0 {
+ renesas,groups = "scif0_data_d";
+ renesas,function = "scif0";
+ };
+
+ ether_pins: ether {
+ renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+ renesas,function = "eth";
+ };
+
+ phy1_pins: phy1 {
+ renesas,groups = "intc_irq0";
+ renesas,function = "intc";
+ };
+
+ sdhi0_pins: sd0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sd2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+
+ qspi_pins: spi0 {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+
+ i2c2_pins: i2c2 {
+ renesas,groups = "i2c2";
+ renesas,function = "i2c2";
+ };
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
+};
+
+&scif0 {
+ pinctrl-0 = <&scif0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+ðer {
+ pinctrl-0 = <ðer_pins &phy1_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "ok";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi0>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_sdhi2>;
+ vqmmc-supply = <&vccq_sdhi2>;
+ cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "loader_prg";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user_prg";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash_fs";
+ reg = <0x00440000 0x03bc0000>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
+};
+
+&sata0 {
+ status = "okay";
+};
+
+/* composite video input */
+&vin0 {
+ status = "ok";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
+
+&pci0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pci1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ status = "okay";
+};
+
+&pciec {
+ status = "okay";
+};
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x1280>, /* SSI */
+ <0 0xec541000 0 0x280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
renesas,function = "intc";
};
+ i2c1_pins: i2c1 {
+ renesas,groups = "i2c1";
+ renesas,function = "i2c1";
+ };
+
mmcif0_pins: mmcif0 {
renesas,groups = "mmc_data8", "mmc_ctrl";
renesas,function = "mmc";
};
+
+ qspi_pins: spi0 {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
+
+ usb0_pins: usb0 {
+ renesas,groups = "usb0";
+ renesas,function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ renesas,groups = "usb1";
+ renesas,function = "usb1";
+ };
};
&scif2 {
};
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
+};
+
&mmcif0 {
pinctrl-0 = <&mmcif0_pins>;
pinctrl-names = "default";
non-removable;
status = "okay";
};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-cpol;
+ spi-cpha;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "user";
+ reg = <0x00040000 0x00400000>;
+ read-only;
+ };
+ partition@440000 {
+ label = "flash";
+ reg = <0x00440000 0x03bc0000>;
+ };
+ };
+};
+
+/* composite video input */
+&vin0 {
+ status = "okay";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
+
+&pci0 {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
+&pci1 {
+ status = "okay";
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+};
+
+&usbphy {
+ status = "okay";
+};
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ spi0 = &qspi;
+ vin0 = &vin0;
+ vin1 = &vin1;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO0>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO1>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO2>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO3>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO4>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 28>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
+ power-domains = <&cpg_clocks>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&mstp9_clks R8A7794_CLK_GPIO6>;
+ power-domains = <&cpg_clocks>;
+ };
+
cmt0: timer@ffca0000 {
compatible = "renesas,cmt-48-gen2";
reg = <0 0xffca0000 0 0x1004>;
status = "disabled";
};
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c@e6508000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ compatible = "renesas,i2c-r8a7794";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmcif0: mmc@ee200000 {
compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
status = "disabled";
};
+ qspi: spi@e6b10000 {
+ compatible = "renesas,qspi-r8a7794", "renesas,qspi";
+ reg = <0 0xe6b10000 0 0x2c>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a7794";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a7794";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ pci0: pci@ee090000 {
+ compatible = "renesas,pci-r8a7794";
+ device_type = "pci";
+ reg = <0 0xee090000 0 0xc00>,
+ <0 0xee080000 0 0x1100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+ };
+
+ pci1: pci@ee0d0000 {
+ compatible = "renesas,pci-r8a7794";
+ device_type = "pci";
+ reg = <0 0xee0d0000 0 0xc00>,
+ <0 0xee0c0000 0 0x1100>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ bus-range = <1 1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+ interrupt-map-mask = <0xff00 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+ };
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7794";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+ power-domains = <&cpg_clocks>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7794";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
+ clock-names = "usbhs";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
- <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+ clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
- clock-indices = <
- R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
- R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
- R8A7794_CLK_I2C0
- >;
+ clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5
+ R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3
+ R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1
+ R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD
+ R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+ R8A7794_CLK_I2C3 R8A7794_CLK_I2C2
+ R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>;
clock-output-names =
- "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+ "gpio6", "gpio5", "gpio4", "gpio3", "gpio2",
+ "gpio1", "gpio0", "qspi_mod",
+ "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
--- /dev/null
+/*
+ * Common file for the AA121TD01 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2015 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ panel {
+ compatible = "mitsubishi,aa121td01", "panel-dpi";
+
+ width-mm = <261>;
+ height-mm = <163>;
+
+ panel-timing {
+ /* 1280x800 @60Hz */
+ clock-frequency = <71000000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hsync-len = <70>;
+ hfront-porch = <20>;
+ hback-porch = <70>;
+ vsync-len = <5>;
+ vfront-porch = <3>;
+ vback-porch = <15>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_connector>;
+ };
+ };
+ };
+};
+
+&lvds_connector {
+ remote-endpoint = <&panel_in>;
+};
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
disable-wp;
};
};
};
+&mmc0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+ vmmc-supply = <&vcc_sd0>;
+};
+
&pinctrl {
lan8720a {
phy_int: phy-int {
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
status = "okay";
};
vmmc-supply = <&vcc_sd0>;
bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
disable-wp;
};
reg = <0 0x80000000>;
};
+ dovdd_1v8: dovdd-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "dovdd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc28_dvp>;
+ };
+
ext_gmac: external-gmac-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ext_gmac";
};
+ io_domains: io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ rockchip,grf = <&grf>;
+
+ audio-supply = <&vcca_33>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&dovdd_1v8>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vccio_wl>;
+ };
+
ir: ir-receiver {
compatible = "gpio-ir-receiver";
pinctrl-names = "default";
};
};
- vcc_sys: vsys-regulator {
+ vbat_wl: vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_5v>;
};
+
+ /*
+ * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled
+ * by the dvp_pwr pin.
+ */
+ vcc28_dvp: vcc28-dvp-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dvp_pwr>;
+ regulator-name = "vcc28_dvp";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_io>;
+ };
};
&cpu0 {
regulator-always-on;
};
- vcc_18: REG11 {
+ vccio_wl: vcc_18: REG11 {
regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
+ dvp {
+ dvp_pwr: dvp-pwr {
+ rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
gmac {
phy_int: phy-int {
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
- vmmc-supply = <&vcc_18>;
+ vmmc-supply = <&vbat_wl>;
+ vqmmc-supply = <&vccio_wl>;
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
status = "okay";
};
};
};
+ io_domains: io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ rockchip,grf = <&grf>;
+
+ audio-supply = <&vcca_33>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&vcc18_dvp>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vccio_wl>;
+ };
+
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&ir_int>;
};
+ vcc_flash: flash-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_flash";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
};
+
+ /*
+ * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled
+ * by the dvp_pwr pin.
+ */
+ vcc18_dvp: vcc18-dvp-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc18-dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc28_dvp>;
+ };
+
+ vcc28_dvp: vcc28-dvp-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dvp_pwr>;
+ regulator-name = "vcc28_dvp";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_io>;
+ };
};
&cpu0 {
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_flash>;
status = "okay";
};
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
status = "okay";
};
};
};
- vcca_codec: LDO_REG8 {
+ vcca_33: LDO_REG8 {
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-name = "vcca_codec";
+ regulator-name = "vcca_33";
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
- vcc_wl: SWITCH_REG1 {
+ vccio_wl: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
- regulator-name = "vcc_wl";
+ regulator-name = "vccio_wl";
regulator-state-mem {
regulator-on-in-suspend;
};
};
};
+ dvp {
+ dvp_pwr: dvp-pwr {
+ rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
ir {
ir_int: ir-int {
rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ sdmmc {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&tsadc {
--- /dev/null
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+ memory {
+ reg = <0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ mmc-pwrseq = <&emmc_pwrseq>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ phy-mode = "rgmii";
+ phy-supply = <&vccio_pmu>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins &phy_rst>;
+ snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 30000>;
+ rx_delay = <0x10>;
+ tx_delay = <0x30>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ act8846: act8846@5a {
+ compatible = "active-semi,act8846";
+ reg = <0x5a>;
+ inl1-supply = <&vcc_io>;
+ inl2-supply = <&vcc_sys>;
+ inl3-supply = <&vcc_20>;
+ vp1-supply = <&vcc_sys>;
+ vp2-supply = <&vcc_sys>;
+ vp3-supply = <&vcc_sys>;
+ vp4-supply = <&vcc_sys>;
+
+ regulators {
+ vcc_ddr: REG1 {
+ regulator-name = "VCC_DDR";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ vcc_io: REG2 {
+ regulator-name = "VCC_IO";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_log: REG3 {
+ regulator-name = "VDD_LOG";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_20: REG4 {
+ regulator-name = "VCC_20";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ vccio_sd: REG5 {
+ regulator-name = "VCCIO_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd10_lcd: REG6 {
+ regulator-name = "VDD10_LCD";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcca_codec: REG7 {
+ regulator-name = "VCCA_CODEC";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcca_tp: REG8 {
+ regulator-name = "VCCA_TP";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vccio_pmu: REG9 {
+ regulator-name = "VCCIO_PMU";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_10: REG10 {
+ regulator-name = "VDD_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ vcc_18: REG11 {
+ regulator-name = "VCC_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc18_lcd: REG12 {
+ regulator-name = "VCC18_LCD";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ vdd_cpu: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <300>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <8000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_gpu: syr828@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <300>;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <8000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&pinctrl {
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ phy_rst: phy-rst {
+ rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
--- /dev/null
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-rock2-som.dtsi"
+
+/ {
+ model = "Radxa Rock 2 Square";
+ compatible = "radxa,rock2-square", "rockchip,rk3288";
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ vcc_usb_host: vcc-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ /* Always on as the rockchip usb phy doesn't have a vbus-supply
+ * property
+ */
+ regulator-always-on;
+ regulator-name = "vcc_host";
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&gmac {
+ status = "ok";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ hym8563@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&pinctrl {
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Google Veyron Jaq Rev 1+ board device tree source
+ *
+ * Copyright 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3288-veyron-chromebook.dtsi"
+#include "cros-ec-sbs.dtsi"
+
+/ {
+ model = "Google Jaq";
+ compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
+ "google,veyron-jaq-rev3", "google,veyron-jaq-rev2",
+ "google,veyron-jaq-rev1", "google,veyron-jaq",
+ "google,veyron", "rockchip,rk3288";
+
+ panel_regulator: panel-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_enable_h>;
+ regulator-name = "panel_regulator";
+ vin-supply = <&vcc33_sys>;
+ };
+
+ vcc18_lcd: vcc18-lcd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_1v8_disp_en>;
+ regulator-name = "vcc18_lcd";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc18_wl>;
+ };
+
+ backlight_regulator: backlight-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_pwr_en>;
+ regulator-name = "backlight_regulator";
+ vin-supply = <&vcc33_sys>;
+ startup-delay-us = <15000>;
+ };
+};
+
+&rk808 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
+ dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ mic_vcc: LDO_REG2 {
+ regulator-name = "mic_vcc";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+};
+
+&sdmmc {
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+ &sdmmc_bus4>;
+};
+
+&vcc_5v {
+ enable-active-high;
+ gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&drv_5v>;
+};
+
+&vcc50_hdmi {
+ enable-active-high;
+ gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc50_hdmi_en>;
+};
+
+&pinctrl {
+ backlight {
+ bl_pwr_en: bl_pwr_en {
+ rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buck-5v {
+ drv_5v: drv-5v {
+ rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ edp {
+ edp_hpd: edp_hpd {
+ rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
+ };
+ };
+
+ hdmi {
+ vcc50_hdmi_en: vcc50-hdmi-en {
+ rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd {
+ lcd_enable_h: lcd-en {
+ rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ avdd_1v8_disp_en: avdd-1v8-disp-en {
+ rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dvs_1: dvs-1 {
+ rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
};
};
- /*
- * On Marvell-based hardware this is a no-connect. Make sure we enable
- * the pullup so that the line doesn't float. The pullup shouldn't
- * hurt on Broadcom-based hardware since the other side is actively
- * driving this signal. As proof: we've already got a pullup on RX.
- */
- uart0 {
- uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
- };
- };
-
write-protect {
fw_wp_ap: fw-wp-ap {
rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3288-cru.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/power/rk3288-power.h>
#include "skeleton.dtsi"
/ {
};
pmu: power-management@ff730000 {
- compatible = "rockchip,rk3288-pmu", "syscon";
+ compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd";
reg = <0xff730000 0x100>;
+
+ power: power-controller {
+ compatible = "rockchip,rk3288-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Note: Although SCLK_* are the working clocks
+ * of device without including on the NOC, needed for
+ * synchronous reset.
+ *
+ * The clocks on the which NOC:
+ * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU.
+ * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU.
+ * ACLK_RGA is on ACLK_RGA_NIU.
+ * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU.
+ *
+ * Which clock are device clocks:
+ * clocks devices
+ * *_IEP IEP:Image Enhancement Processor
+ * *_ISP ISP:Image Signal Processing
+ * *_VIP VIP:Video Input Processor
+ * *_VOP* VOP:Visual Output Processor
+ * *_RGA RGA
+ * *_EDP* EDP
+ * *_LVDS_* LVDS
+ * *_HDMI HDMI
+ * *_MIPI_* MIPI
+ */
+ pd_vio {
+ reg = <RK3288_PD_VIO>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru ACLK_ISP>,
+ <&cru ACLK_RGA>,
+ <&cru ACLK_VIP>,
+ <&cru ACLK_VOP0>,
+ <&cru ACLK_VOP1>,
+ <&cru DCLK_VOP0>,
+ <&cru DCLK_VOP1>,
+ <&cru HCLK_IEP>,
+ <&cru HCLK_ISP>,
+ <&cru HCLK_RGA>,
+ <&cru HCLK_VIP>,
+ <&cru HCLK_VOP0>,
+ <&cru HCLK_VOP1>,
+ <&cru PCLK_EDP_CTRL>,
+ <&cru PCLK_HDMI_CTRL>,
+ <&cru PCLK_LVDS_PHY>,
+ <&cru PCLK_MIPI_CSI>,
+ <&cru PCLK_MIPI_DSI0>,
+ <&cru PCLK_MIPI_DSI1>,
+ <&cru SCLK_EDP_24M>,
+ <&cru SCLK_EDP>,
+ <&cru SCLK_ISP_JPE>,
+ <&cru SCLK_ISP>,
+ <&cru SCLK_RGA>;
+ };
+
+ /*
+ * Note: The following 3 are HEVC(H.265) clocks,
+ * and on the ACLK_HEVC_NIU (NOC).
+ */
+ pd_hevc {
+ reg = <RK3288_PD_HEVC>;
+ clocks = <&cru ACLK_HEVC>,
+ <&cru SCLK_HEVC_CABAC>,
+ <&cru SCLK_HEVC_CORE>;
+ };
+
+ /*
+ * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC
+ * (video endecoder & decoder) clocks that on the
+ * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
+ */
+ pd_video {
+ reg = <RK3288_PD_VIDEO>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ };
+
+ /*
+ * Note: ACLK_GPU is the GPU clock,
+ * and on the ACLK_GPU_NIU (NOC).
+ */
+ pd_gpu {
+ reg = <RK3288_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ };
+ };
};
sgrf: syscon@ff740000 {
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
reg = <0xff930300 0x100>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopb_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ power-domains = <&power RK3288_PD_VIO>;
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopl_mmu>;
reg = <0xff940300 0x100>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "vopl_mmu";
+ power-domains = <&power RK3288_PD_VIO>;
#iommu-cells = <0>;
status = "disabled";
};
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
clock-names = "iahb", "isfr";
+ power-domains = <&power RK3288_PD_VIO>;
status = "disabled";
ports {
#interrupt-cells = <2>;
};
+ hdmi {
+ hdmi_ddc: hdmi-ddc {
+ rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>,
+ <7 20 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
pcfg_pull_up: pcfg-pull-up {
bias-pull-up;
};
};
uart0_cts: uart0-cts {
- rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>;
};
uart0_rts: uart0-rts {
};
uart1_cts: uart1-cts {
- rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>;
};
uart1_rts: uart1-rts {
};
uart3_cts: uart3-cts {
- rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+ rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>;
};
uart3_rts: uart3-rts {
};
uart4_cts: uart4-cts {
- rockchip,pins = <5 14 3 &pcfg_pull_none>;
+ rockchip,pins = <5 14 3 &pcfg_pull_up>;
};
uart4_rts: uart4-rts {
#size-cells = <0>;
cpu {
- compatible = "arm,arm926ejs";
+ compatible = "arm,arm926ej-s";
};
};
--- /dev/null
+#define PINMUX_PIN(no, func, ioset) \
+(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
+
+#define PIN_PA0 0
+#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0)
+#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1)
+#define PIN_PA0__QSPI0_SCK PINMUX_PIN(PIN_PA0, 2, 1)
+#define PIN_PA0__D0 PINMUX_PIN(PIN_PA0, 6, 2)
+#define PIN_PA1 1
+#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0)
+#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1)
+#define PIN_PA1__QSPI0_CS PINMUX_PIN(PIN_PA1, 2, 1)
+#define PIN_PA1__D1 PINMUX_PIN(PIN_PA1, 6, 2)
+#define PIN_PA2 2
+#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0)
+#define PIN_PA2__SDMMC0_DAT0 PINMUX_PIN(PIN_PA2, 1, 1)
+#define PIN_PA2__QSPI0_IO0 PINMUX_PIN(PIN_PA2, 2, 1)
+#define PIN_PA2__D2 PINMUX_PIN(PIN_PA2, 6, 2)
+#define PIN_PA3 3
+#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0)
+#define PIN_PA3__SDMMC0_DAT1 PINMUX_PIN(PIN_PA3, 1, 1)
+#define PIN_PA3__QSPI0_IO1 PINMUX_PIN(PIN_PA3, 2, 1)
+#define PIN_PA3__D3 PINMUX_PIN(PIN_PA3, 6, 2)
+#define PIN_PA4 4
+#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0)
+#define PIN_PA4__SDMMC0_DAT2 PINMUX_PIN(PIN_PA4, 1, 1)
+#define PIN_PA4__QSPI0_IO2 PINMUX_PIN(PIN_PA4, 2, 1)
+#define PIN_PA4__D4 PINMUX_PIN(PIN_PA4, 6, 2)
+#define PIN_PA5 5
+#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0)
+#define PIN_PA5__SDMMC0_DAT3 PINMUX_PIN(PIN_PA5, 1, 1)
+#define PIN_PA5__QSPI0_IO3 PINMUX_PIN(PIN_PA5, 2, 1)
+#define PIN_PA5__D5 PINMUX_PIN(PIN_PA5, 6, 2)
+#define PIN_PA6 6
+#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0)
+#define PIN_PA6__SDMMC0_DAT4 PINMUX_PIN(PIN_PA6, 1, 1)
+#define PIN_PA6__QSPI1_SCK PINMUX_PIN(PIN_PA6, 2, 1)
+#define PIN_PA6__TIOA5 PINMUX_PIN(PIN_PA6, 4, 1)
+#define PIN_PA6__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA6, 5, 1)
+#define PIN_PA6__D6 PINMUX_PIN(PIN_PA6, 6, 2)
+#define PIN_PA7 7
+#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0)
+#define PIN_PA7__SDMMC0_DAT5 PINMUX_PIN(PIN_PA7, 1, 1)
+#define PIN_PA7__QSPI1_IO0 PINMUX_PIN(PIN_PA7, 2, 1)
+#define PIN_PA7__TIOB5 PINMUX_PIN(PIN_PA7, 4, 1)
+#define PIN_PA7__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA7, 5, 1)
+#define PIN_PA7__D7 PINMUX_PIN(PIN_PA7, 6, 2)
+#define PIN_PA8 8
+#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0)
+#define PIN_PA8__SDMMC0_DAT6 PINMUX_PIN(PIN_PA8, 1, 1)
+#define PIN_PA8__QSPI1_IO1 PINMUX_PIN(PIN_PA8, 2, 1)
+#define PIN_PA8__TCLK5 PINMUX_PIN(PIN_PA8, 4, 1)
+#define PIN_PA8__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA8, 5, 1)
+#define PIN_PA8__NWE_NANDWE PINMUX_PIN(PIN_PA8, 6, 2)
+#define PIN_PA9 9
+#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0)
+#define PIN_PA9__SDMMC0_DAT7 PINMUX_PIN(PIN_PA9, 1, 1)
+#define PIN_PA9__QSPI1_IO2 PINMUX_PIN(PIN_PA9, 2, 1)
+#define PIN_PA9__TIOA4 PINMUX_PIN(PIN_PA9, 4, 1)
+#define PIN_PA9__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA9, 5, 1)
+#define PIN_PA9__NCS3 PINMUX_PIN(PIN_PA9, 6, 2)
+#define PIN_PA10 10
+#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0)
+#define PIN_PA10__SDMMC0_RSTN PINMUX_PIN(PIN_PA10, 1, 1)
+#define PIN_PA10__QSPI1_IO3 PINMUX_PIN(PIN_PA10, 2, 1)
+#define PIN_PA10__TIOB4 PINMUX_PIN(PIN_PA10, 4, 1)
+#define PIN_PA10__FLEXCOM2_IO4 PINMUX_PIN(PIN_PA10, 5, 1)
+#define PIN_PA10__A21_NANDALE PINMUX_PIN(PIN_PA10, 6, 2)
+#define PIN_PA11 11
+#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0)
+#define PIN_PA11__SDMMC0_VDDSEL PINMUX_PIN(PIN_PA11, 1, 1)
+#define PIN_PA11__QSPI1_CS PINMUX_PIN(PIN_PA11, 2, 1)
+#define PIN_PA11__TCLK4 PINMUX_PIN(PIN_PA11, 4, 1)
+#define PIN_PA11__A22_NANDCLE PINMUX_PIN(PIN_PA11, 6, 2)
+#define PIN_PA12 12
+#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0)
+#define PIN_PA12__SDMMC0_WP PINMUX_PIN(PIN_PA12, 1, 1)
+#define PIN_PA12__IRQ PINMUX_PIN(PIN_PA12, 2, 1)
+#define PIN_PA12__NRD_NANDOE PINMUX_PIN(PIN_PA12, 6, 2)
+#define PIN_PA13 13
+#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0)
+#define PIN_PA13__SDMMC0_CD PINMUX_PIN(PIN_PA13, 1, 1)
+#define PIN_PA13__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA13, 5, 1)
+#define PIN_PA13__D8 PINMUX_PIN(PIN_PA13, 6, 2)
+#define PIN_PA14 14
+#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0)
+#define PIN_PA14__SPI0_SPCK PINMUX_PIN(PIN_PA14, 1, 1)
+#define PIN_PA14__TK1 PINMUX_PIN(PIN_PA14, 2, 1)
+#define PIN_PA14__QSPI0_SCK PINMUX_PIN(PIN_PA14, 3, 2)
+#define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2)
+#define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1)
+#define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2)
+#define PIN_PA15 14
+#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0)
+#define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1)
+#define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1)
+#define PIN_PA15__QSPI0_CS PINMUX_PIN(PIN_PA15, 3, 2)
+#define PIN_PA15__I2SC1_CK PINMUX_PIN(PIN_PA15, 4, 2)
+#define PIN_PA15__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA15, 5, 1)
+#define PIN_PA15__D10 PINMUX_PIN(PIN_PA15, 6, 2)
+#define PIN_PA16 16
+#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0)
+#define PIN_PA16__SPI0_MISO PINMUX_PIN(PIN_PA16, 1, 1)
+#define PIN_PA16__TD1 PINMUX_PIN(PIN_PA16, 2, 1)
+#define PIN_PA16__QSPI0_IO0 PINMUX_PIN(PIN_PA16, 3, 2)
+#define PIN_PA16__I2SC1_WS PINMUX_PIN(PIN_PA16, 4, 2)
+#define PIN_PA16__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA16, 5, 1)
+#define PIN_PA16__D11 PINMUX_PIN(PIN_PA16, 6, 2)
+#define PIN_PA17 17
+#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0)
+#define PIN_PA17__SPI0_NPCS0 PINMUX_PIN(PIN_PA17, 1, 1)
+#define PIN_PA17__RD1 PINMUX_PIN(PIN_PA17, 2, 1)
+#define PIN_PA17__QSPI0_IO1 PINMUX_PIN(PIN_PA17, 3, 2)
+#define PIN_PA17__I2SC1_DI0 PINMUX_PIN(PIN_PA17, 4, 2)
+#define PIN_PA17__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA17, 5, 1)
+#define PIN_PA17__D12 PINMUX_PIN(PIN_PA17, 6, 2)
+#define PIN_PA18 18
+#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0)
+#define PIN_PA18__SPI0_NPCS1 PINMUX_PIN(PIN_PA18, 1, 1)
+#define PIN_PA18__RK1 PINMUX_PIN(PIN_PA18, 2, 1)
+#define PIN_PA18__QSPI0_IO2 PINMUX_PIN(PIN_PA18, 3, 2)
+#define PIN_PA18__I2SC1_DO0 PINMUX_PIN(PIN_PA18, 4, 2)
+#define PIN_PA18__SDMMC1_DAT0 PINMUX_PIN(PIN_PA18, 5, 1)
+#define PIN_PA18__D13 PINMUX_PIN(PIN_PA18, 6, 2)
+#define PIN_PA19 19
+#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0)
+#define PIN_PA19__SPI0_NPCS2 PINMUX_PIN(PIN_PA19, 1, 1)
+#define PIN_PA19__RF1 PINMUX_PIN(PIN_PA19, 2, 1)
+#define PIN_PA19__QSPI0_IO3 PINMUX_PIN(PIN_PA19, 3, 2)
+#define PIN_PA19__TIOA0 PINMUX_PIN(PIN_PA19, 4, 1)
+#define PIN_PA19__SDMMC1_DAT1 PINMUX_PIN(PIN_PA19, 5, 1)
+#define PIN_PA19__D14 PINMUX_PIN(PIN_PA19, 6, 2)
+#define PIN_PA20 20
+#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0)
+#define PIN_PA20__SPI0_NPCS3 PINMUX_PIN(PIN_PA20, 1, 1)
+#define PIN_PA20__TIOB0 PINMUX_PIN(PIN_PA20, 4, 1)
+#define PIN_PA20__SDMMC1_DAT2 PINMUX_PIN(PIN_PA20, 5, 1)
+#define PIN_PA20__D15 PINMUX_PIN(PIN_PA20, 6, 2)
+#define PIN_PA21 21
+#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0)
+#define PIN_PA21__IRQ PINMUX_PIN(PIN_PA21, 1, 2)
+#define PIN_PA21__PCK2 PINMUX_PIN(PIN_PA21, 2, 3)
+#define PIN_PA21__TCLK0 PINMUX_PIN(PIN_PA21, 4, 1)
+#define PIN_PA21__SDMMC1_DAT3 PINMUX_PIN(PIN_PA21, 5, 1)
+#define PIN_PA21__NANDRDY PINMUX_PIN(PIN_PA21, 6, 2)
+#define PIN_PA22 22
+#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0)
+#define PIN_PA22__FLEXCOM1_IO2 PINMUX_PIN(PIN_PA22, 1, 1)
+#define PIN_PA22__D0 PINMUX_PIN(PIN_PA22, 2, 1)
+#define PIN_PA22__TCK PINMUX_PIN(PIN_PA22, 3, 4)
+#define PIN_PA22__SPI1_SPCK PINMUX_PIN(PIN_PA22, 4, 2)
+#define PIN_PA22__SDMMC1_CK PINMUX_PIN(PIN_PA22, 5, 1)
+#define PIN_PA22__QSPI0_SCK PINMUX_PIN(PIN_PA22, 6, 3)
+#define PIN_PA23 23
+#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0)
+#define PIN_PA23__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA23, 1, 1)
+#define PIN_PA23__D1 PINMUX_PIN(PIN_PA23, 2, 1)
+#define PIN_PA23__TDI PINMUX_PIN(PIN_PA23, 3, 4)
+#define PIN_PA23__SPI1_MOSI PINMUX_PIN(PIN_PA23, 4, 2)
+#define PIN_PA23__QSPI0_CS PINMUX_PIN(PIN_PA23, 6, 3)
+#define PIN_PA24 24
+#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0)
+#define PIN_PA24__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA24, 1, 1)
+#define PIN_PA24__D2 PINMUX_PIN(PIN_PA24, 2, 1)
+#define PIN_PA24__TDO PINMUX_PIN(PIN_PA24, 3, 4)
+#define PIN_PA24__SPI1_MISO PINMUX_PIN(PIN_PA24, 4, 2)
+#define PIN_PA24__QSPI0_IO0 PINMUX_PIN(PIN_PA24, 6, 3)
+#define PIN_PA25 25
+#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0)
+#define PIN_PA25__FLEXCOM1_IO3 PINMUX_PIN(PIN_PA25, 1, 1)
+#define PIN_PA25__D3 PINMUX_PIN(PIN_PA25, 2, 1)
+#define PIN_PA25__TMS PINMUX_PIN(PIN_PA25, 3, 4)
+#define PIN_PA25__SPI1_NPCS0 PINMUX_PIN(PIN_PA25, 4, 2)
+#define PIN_PA25__QSPI0_IO1 PINMUX_PIN(PIN_PA25, 6, 3)
+#define PIN_PA26 26
+#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0)
+#define PIN_PA26__FLEXCOM1_IO4 PINMUX_PIN(PIN_PA26, 1, 1)
+#define PIN_PA26__D4 PINMUX_PIN(PIN_PA26, 2, 1)
+#define PIN_PA26__NTRST PINMUX_PIN(PIN_PA26, 3, 4)
+#define PIN_PA26__SPI1_NPCS1 PINMUX_PIN(PIN_PA26, 4, 2)
+#define PIN_PA26__QSPI0_IO2 PINMUX_PIN(PIN_PA26, 6, 3)
+#define PIN_PA27 27
+#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0)
+#define PIN_PA27__TIOA1 PINMUX_PIN(PIN_PA27, 1, 2)
+#define PIN_PA27__D5 PINMUX_PIN(PIN_PA27, 2, 1)
+#define PIN_PA27__SPI0_NPCS2 PINMUX_PIN(PIN_PA27, 3, 2)
+#define PIN_PA27__SPI1_NPCS2 PINMUX_PIN(PIN_PA27, 4, 2)
+#define PIN_PA27__SDMMC1_RSTN PINMUX_PIN(PIN_PA27, 5, 1)
+#define PIN_PA27__QSPI0_IO3 PINMUX_PIN(PIN_PA27, 6, 3)
+#define PIN_PA28 28
+#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0)
+#define PIN_PA28__TIOB1 PINMUX_PIN(PIN_PA28, 1, 2)
+#define PIN_PA28__D6 PINMUX_PIN(PIN_PA28, 2, 1)
+#define PIN_PA28__SPI0_NPCS3 PINMUX_PIN(PIN_PA28, 3, 2)
+#define PIN_PA28__SPI1_NPCS3 PINMUX_PIN(PIN_PA28, 4, 2)
+#define PIN_PA28__SDMMC1_CMD PINMUX_PIN(PIN_PA28, 5, 1)
+#define PIN_PA28__CLASSD_L0 PINMUX_PIN(PIN_PA28, 6, 1)
+#define PIN_PA29 29
+#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0)
+#define PIN_PA29__TCLK1 PINMUX_PIN(PIN_PA29, 1, 2)
+#define PIN_PA29__D7 PINMUX_PIN(PIN_PA29, 2, 1)
+#define PIN_PA29__SPI0_NPCS1 PINMUX_PIN(PIN_PA29, 3, 2)
+#define PIN_PA29__SDMMC1_WP PINMUX_PIN(PIN_PA29, 5, 1)
+#define PIN_PA29__CLASSD_L1 PINMUX_PIN(PIN_PA29, 6, 1)
+#define PIN_PA30 30
+#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0)
+#define PIN_PA30__NWE_NANDWE PINMUX_PIN(PIN_PA30, 2, 1)
+#define PIN_PA30__SPI0_NPCS0 PINMUX_PIN(PIN_PA30, 3, 2)
+#define PIN_PA30__PWMH0 PINMUX_PIN(PIN_PA30, 4, 1)
+#define PIN_PA30__SDMMC1_CD PINMUX_PIN(PIN_PA30, 5, 1)
+#define PIN_PA30__CLASSD_L2 PINMUX_PIN(PIN_PA30, 6, 1)
+#define PIN_PA31 31
+#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0)
+#define PIN_PA31__NCS3 PINMUX_PIN(PIN_PA31, 2, 1)
+#define PIN_PA31__SPI0_MISO PINMUX_PIN(PIN_PA31, 3, 2)
+#define PIN_PA31__PWML0 PINMUX_PIN(PIN_PA31, 4, 1)
+#define PIN_PA31__CLASSD_L3 PINMUX_PIN(PIN_PA31, 6, 1)
+#define PIN_PB0 32
+#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0)
+#define PIN_PB0__A21_NANDALE PINMUX_PIN(PIN_PB0, 2, 1)
+#define PIN_PB0__SPI0_MOSI PINMUX_PIN(PIN_PB0, 3, 2)
+#define PIN_PB0__PWMH1 PINMUX_PIN(PIN_PB0, 4, 1)
+#define PIN_PB1 33
+#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0)
+#define PIN_PB1__A22_NANDCLE PINMUX_PIN(PIN_PB1, 2, 1)
+#define PIN_PB1__SPI0_SPCK PINMUX_PIN(PIN_PB1, 3, 2)
+#define PIN_PB1__PWML1 PINMUX_PIN(PIN_PB1, 4, 1)
+#define PIN_PB1__CLASSD_R0 PINMUX_PIN(PIN_PB1, 6, 1)
+#define PIN_PB2 34
+#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0)
+#define PIN_PB2__NRD_NANDOE PINMUX_PIN(PIN_PB2, 2, 1)
+#define PIN_PB2__PWMFI0 PINMUX_PIN(PIN_PB2, 4, 1)
+#define PIN_PB2__CLASSD_R1 PINMUX_PIN(PIN_PB2, 6, 1)
+#define PIN_PB3 35
+#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0)
+#define PIN_PB3__URXD4 PINMUX_PIN(PIN_PB3, 1, 1)
+#define PIN_PB3__D8 PINMUX_PIN(PIN_PB3, 2, 1)
+#define PIN_PB3__IRQ PINMUX_PIN(PIN_PB3, 3, 3)
+#define PIN_PB3__PWMEXTRG0 PINMUX_PIN(PIN_PB3, 4, 1)
+#define PIN_PB3__CLASSD_R2 PINMUX_PIN(PIN_PB3, 6, 1)
+#define PIN_PB4 36
+#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0)
+#define PIN_PB4__UTXD4 PINMUX_PIN(PIN_PB4, 1, 1)
+#define PIN_PB4__D9 PINMUX_PIN(PIN_PB4, 2, 1)
+#define PIN_PB4__FIQ PINMUX_PIN(PIN_PB4, 3, 4)
+#define PIN_PB4__CLASSD_R3 PINMUX_PIN(PIN_PB4, 6, 1)
+#define PIN_PB5 37
+#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0)
+#define PIN_PB5__TCLK2 PINMUX_PIN(PIN_PB5, 1, 1)
+#define PIN_PB5__D10 PINMUX_PIN(PIN_PB5, 2, 1)
+#define PIN_PB5__PWMH2 PINMUX_PIN(PIN_PB5, 3, 1)
+#define PIN_PB5__QSPI1_SCK PINMUX_PIN(PIN_PB5, 4, 2)
+#define PIN_PB5__GTSUCOMP PINMUX_PIN(PIN_PB5, 6, 3)
+#define PIN_PB6 38
+#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0)
+#define PIN_PB6__TIOA2 PINMUX_PIN(PIN_PB6, 1, 1)
+#define PIN_PB6__D11 PINMUX_PIN(PIN_PB6, 2, 1)
+#define PIN_PB6__PWML2 PINMUX_PIN(PIN_PB6, 3, 1)
+#define PIN_PB6__QSPI1_CS PINMUX_PIN(PIN_PB6, 4, 2)
+#define PIN_PB6__GTXER PINMUX_PIN(PIN_PB6, 6, 3)
+#define PIN_PB7 39
+#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0)
+#define PIN_PB7__TIOB2 PINMUX_PIN(PIN_PB7, 1, 1)
+#define PIN_PB7__D12 PINMUX_PIN(PIN_PB7, 2, 1)
+#define PIN_PB7__PWMH3 PINMUX_PIN(PIN_PB7, 3, 1)
+#define PIN_PB7__QSPI1_IO0 PINMUX_PIN(PIN_PB7, 4, 2)
+#define PIN_PB7__GRXCK PINMUX_PIN(PIN_PB7, 6, 3)
+#define PIN_PB8 40
+#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0)
+#define PIN_PB8__TCLK3 PINMUX_PIN(PIN_PB8, 1, 1)
+#define PIN_PB8__D13 PINMUX_PIN(PIN_PB8, 2, 1)
+#define PIN_PB8__PWML3 PINMUX_PIN(PIN_PB8, 3, 1)
+#define PIN_PB8__QSPI1_IO1 PINMUX_PIN(PIN_PB8, 4, 2)
+#define PIN_PB8__GCRS PINMUX_PIN(PIN_PB8, 6, 3)
+#define PIN_PB9 41
+#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0)
+#define PIN_PB9__TIOA3 PINMUX_PIN(PIN_PB9, 1, 1)
+#define PIN_PB9__D14 PINMUX_PIN(PIN_PB9, 2, 1)
+#define PIN_PB9__PWMFI1 PINMUX_PIN(PIN_PB9, 3, 1)
+#define PIN_PB9__QSPI1_IO2 PINMUX_PIN(PIN_PB9, 4, 2)
+#define PIN_PB9__GCOL PINMUX_PIN(PIN_PB9, 6, 3)
+#define PIN_PB10 42
+#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0)
+#define PIN_PB10__TIOB3 PINMUX_PIN(PIN_PB10, 1, 1)
+#define PIN_PB10__D15 PINMUX_PIN(PIN_PB10, 2, 1)
+#define PIN_PB10__PWMEXTRG1 PINMUX_PIN(PIN_PB10, 3, 1)
+#define PIN_PB10__QSPI1_IO3 PINMUX_PIN(PIN_PB10, 4, 2)
+#define PIN_PB10__GRX2 PINMUX_PIN(PIN_PB10, 6, 3)
+#define PIN_PB11 43
+#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0)
+#define PIN_PB11__LCDDAT0 PINMUX_PIN(PIN_PB11, 1, 1)
+#define PIN_PB11__A0_NBS0 PINMUX_PIN(PIN_PB11, 2, 1)
+#define PIN_PB11__URXD3 PINMUX_PIN(PIN_PB11, 3, 3)
+#define PIN_PB11__PDMIC_DAT PINMUX_PIN(PIN_PB11, 4, 2)
+#define PIN_PB11__GRX3 PINMUX_PIN(PIN_PB11, 6, 3)
+#define PIN_PB12 44
+#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0)
+#define PIN_PB12__LCDDAT1 PINMUX_PIN(PIN_PB12, 1, 1)
+#define PIN_PB12__A1 PINMUX_PIN(PIN_PB12, 2, 1)
+#define PIN_PB12__UTXD3 PINMUX_PIN(PIN_PB12, 3, 3)
+#define PIN_PB12__PDMIC_CLK PINMUX_PIN(PIN_PB12, 4, 2)
+#define PIN_PB12__GTX2 PINMUX_PIN(PIN_PB12, 6, 3)
+#define PIN_PB13 45
+#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0)
+#define PIN_PB13__LCDDAT2 PINMUX_PIN(PIN_PB13, 1, 1)
+#define PIN_PB13__A2 PINMUX_PIN(PIN_PB13, 2, 1)
+#define PIN_PB13__PCK1 PINMUX_PIN(PIN_PB13, 3, 3)
+#define PIN_PB13__GTX3 PINMUX_PIN(PIN_PB13, 6, 3)
+#define PIN_PB14 46
+#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0)
+#define PIN_PB14__LCDDAT3 PINMUX_PIN(PIN_PB14, 1, 1)
+#define PIN_PB14__A3 PINMUX_PIN(PIN_PB14, 2, 1)
+#define PIN_PB14__TK1 PINMUX_PIN(PIN_PB14, 3, 2)
+#define PIN_PB14__I2SC1_MCK PINMUX_PIN(PIN_PB14, 4, 1)
+#define PIN_PB14__QSPI1_SCK PINMUX_PIN(PIN_PB14, 5, 3)
+#define PIN_PB14__GTXCK PINMUX_PIN(PIN_PB14, 6, 3)
+#define PIN_PB15 47
+#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0)
+#define PIN_PB15__LCDDAT4 PINMUX_PIN(PIN_PB15, 1, 1)
+#define PIN_PB15__A4 PINMUX_PIN(PIN_PB15, 2, 1)
+#define PIN_PB15__TF1 PINMUX_PIN(PIN_PB15, 3, 2)
+#define PIN_PB15__I2SC1_CK PINMUX_PIN(PIN_PB15, 4, 1)
+#define PIN_PB15__QSPI1_CS PINMUX_PIN(PIN_PB15, 5, 3)
+#define PIN_PB15__GTXEN PINMUX_PIN(PIN_PB15, 6, 3)
+#define PIN_PB16 48
+#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0)
+#define PIN_PB16__LCDDAT5 PINMUX_PIN(PIN_PB16, 1, 1)
+#define PIN_PB16__A5 PINMUX_PIN(PIN_PB16, 2, 1)
+#define PIN_PB16__TD1 PINMUX_PIN(PIN_PB16, 3, 2)
+#define PIN_PB16__I2SC1_WS PINMUX_PIN(PIN_PB16, 4, 1)
+#define PIN_PB16__QSPI1_IO0 PINMUX_PIN(PIN_PB16, 5, 3)
+#define PIN_PB16__GRXDV PINMUX_PIN(PIN_PB16, 6, 3)
+#define PIN_PB17 49
+#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0)
+#define PIN_PB17__LCDDAT6 PINMUX_PIN(PIN_PB17, 1, 1)
+#define PIN_PB17__A6 PINMUX_PIN(PIN_PB17, 2, 1)
+#define PIN_PB17__RD1 PINMUX_PIN(PIN_PB17, 3, 2)
+#define PIN_PB17__I2SC1_DI0 PINMUX_PIN(PIN_PB17, 4, 1)
+#define PIN_PB17__QSPI1_IO1 PINMUX_PIN(PIN_PB17, 5, 3)
+#define PIN_PB17__GRXER PINMUX_PIN(PIN_PB17, 6, 3)
+#define PIN_PB18 50
+#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0)
+#define PIN_PB18__LCDDAT7 PINMUX_PIN(PIN_PB18, 1, 1)
+#define PIN_PB18__A7 PINMUX_PIN(PIN_PB18, 2, 1)
+#define PIN_PB18__RK1 PINMUX_PIN(PIN_PB18, 3, 2)
+#define PIN_PB18__I2SC1_DO0 PINMUX_PIN(PIN_PB18, 4, 1)
+#define PIN_PB18__QSPI1_IO2 PINMUX_PIN(PIN_PB18, 5, 3)
+#define PIN_PB18__GRX0 PINMUX_PIN(PIN_PB18, 6, 3)
+#define PIN_PB19 51
+#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0)
+#define PIN_PB19__LCDDAT8 PINMUX_PIN(PIN_PB19, 1, 1)
+#define PIN_PB19__A8 PINMUX_PIN(PIN_PB19, 2, 1)
+#define PIN_PB19__RF1 PINMUX_PIN(PIN_PB19, 3, 2)
+#define PIN_PB19__TIOA3 PINMUX_PIN(PIN_PB19, 4, 2)
+#define PIN_PB19__QSPI1_IO3 PINMUX_PIN(PIN_PB19, 5, 3)
+#define PIN_PB19__GRX1 PINMUX_PIN(PIN_PB19, 6, 3)
+#define PIN_PB20 52
+#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0)
+#define PIN_PB20__LCDDAT9 PINMUX_PIN(PIN_PB20, 1, 1)
+#define PIN_PB20__A9 PINMUX_PIN(PIN_PB20, 2, 1)
+#define PIN_PB20__TK0 PINMUX_PIN(PIN_PB20, 3, 1)
+#define PIN_PB20__TIOB3 PINMUX_PIN(PIN_PB20, 4, 2)
+#define PIN_PB20__PCK1 PINMUX_PIN(PIN_PB20, 5, 4)
+#define PIN_PB20__GTX0 PINMUX_PIN(PIN_PB20, 6, 3)
+#define PIN_PB21 53
+#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0)
+#define PIN_PB21__LCDDAT10 PINMUX_PIN(PIN_PB21, 1, 1)
+#define PIN_PB21__A10 PINMUX_PIN(PIN_PB21, 2, 1)
+#define PIN_PB21__TF0 PINMUX_PIN(PIN_PB21, 3, 1)
+#define PIN_PB21__TCLK3 PINMUX_PIN(PIN_PB21, 4, 2)
+#define PIN_PB21__FLEXCOM3_IO2 PINMUX_PIN(PIN_PB21, 5, 3)
+#define PIN_PB21__GTX1 PINMUX_PIN(PIN_PB21, 6, 3)
+#define PIN_PB22 54
+#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0)
+#define PIN_PB22__LCDDAT11 PINMUX_PIN(PIN_PB22, 1, 1)
+#define PIN_PB22__A11 PINMUX_PIN(PIN_PB22, 2, 1)
+#define PIN_PB22__TDO PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TIOA2 PINMUX_PIN(PIN_PB22, 4, 2)
+#define PIN_PB22__FLEXCOM3_IO1 PINMUX_PIN(PIN_PB22, 5, 3)
+#define PIN_PB22__GMDC PINMUX_PIN(PIN_PB22, 6, 3)
+#define PIN_PB23 55
+#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0)
+#define PIN_PB23__LCDDAT12 PINMUX_PIN(PIN_PB23, 1, 1)
+#define PIN_PB23__A12 PINMUX_PIN(PIN_PB23, 2, 1)
+#define PIN_PB23__RD0 PINMUX_PIN(PIN_PB23, 3, 1)
+#define PIN_PB23__TIOB2 PINMUX_PIN(PIN_PB23, 4, 2)
+#define PIN_PB23__FLEXCOM3_IO0 PINMUX_PIN(PIN_PB23, 5, 3)
+#define PIN_PB23__GMDIO PINMUX_PIN(PIN_PB23, 6, 3)
+#define PIN_PB24 56
+#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0)
+#define PIN_PB24__LCDDAT13 PINMUX_PIN(PIN_PB24, 1, 1)
+#define PIN_PB24__A13 PINMUX_PIN(PIN_PB24, 2, 1)
+#define PIN_PB24__RK0 PINMUX_PIN(PIN_PB24, 3, 1)
+#define PIN_PB24__TCLK2 PINMUX_PIN(PIN_PB24, 4, 2)
+#define PIN_PB24__FLEXCOM3_IO3 PINMUX_PIN(PIN_PB24, 5, 3)
+#define PIN_PB24__ISC_D10 PINMUX_PIN(PIN_PB24, 6, 3)
+#define PIN_PB25 57
+#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0)
+#define PIN_PB25__LCDDAT14 PINMUX_PIN(PIN_PB25, 1, 1)
+#define PIN_PB25__A14 PINMUX_PIN(PIN_PB25, 2, 1)
+#define PIN_PB25__RF0 PINMUX_PIN(PIN_PB25, 3, 1)
+#define PIN_PB25__FLEXCOM3_IO4 PINMUX_PIN(PIN_PB25, 5, 3)
+#define PIN_PB25__ISC_D11 PINMUX_PIN(PIN_PB25, 6, 3)
+#define PIN_PB26 58
+#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0)
+#define PIN_PB26__LCDDAT15 PINMUX_PIN(PIN_PB26, 1, 1)
+#define PIN_PB26__A15 PINMUX_PIN(PIN_PB26, 2, 1)
+#define PIN_PB26__URXD0 PINMUX_PIN(PIN_PB26, 3, 1)
+#define PIN_PB26__PDMIC_DAT PINMUX_PIN(PIN_PB26, 4, 1)
+#define PIN_PB26__ISC_D0 PINMUX_PIN(PIN_PB26, 6, 3)
+#define PIN_PB27 59
+#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0)
+#define PIN_PB27__LCDDAT16 PINMUX_PIN(PIN_PB27, 1, 1)
+#define PIN_PB27__A16 PINMUX_PIN(PIN_PB27, 2, 1)
+#define PIN_PB27__UTXD0 PINMUX_PIN(PIN_PB27, 3, 1)
+#define PIN_PB27__PDMIC_CLK PINMUX_PIN(PIN_PB27, 4, 1)
+#define PIN_PB27__ISC_D1 PINMUX_PIN(PIN_PB27, 6, 3)
+#define PIN_PB28 60
+#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0)
+#define PIN_PB28__LCDDAT17 PINMUX_PIN(PIN_PB28, 1, 1)
+#define PIN_PB28__A17 PINMUX_PIN(PIN_PB28, 2, 1)
+#define PIN_PB28__FLEXCOM0_IO0 PINMUX_PIN(PIN_PB28, 3, 1)
+#define PIN_PB28__TIOA5 PINMUX_PIN(PIN_PB28, 4, 2)
+#define PIN_PB28__ISC_D2 PINMUX_PIN(PIN_PB28, 6, 3)
+#define PIN_PB29 61
+#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0)
+#define PIN_PB29__LCDDAT18 PINMUX_PIN(PIN_PB29, 1, 1)
+#define PIN_PB29__A18 PINMUX_PIN(PIN_PB29, 2, 1)
+#define PIN_PB29__FLEXCOM0_IO1 PINMUX_PIN(PIN_PB29, 3, 1)
+#define PIN_PB29__TIOB5 PINMUX_PIN(PIN_PB29, 4, 2)
+#define PIN_PB29__ISC_D3 PINMUX_PIN(PIN_PB29, 7, 3)
+#define PIN_PB30 62
+#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0)
+#define PIN_PB30__LCDDAT19 PINMUX_PIN(PIN_PB30, 1, 1)
+#define PIN_PB30__A19 PINMUX_PIN(PIN_PB30, 2, 1)
+#define PIN_PB30__FLEXCOM0_IO2 PINMUX_PIN(PIN_PB30, 3, 1)
+#define PIN_PB30__TCLK5 PINMUX_PIN(PIN_PB30, 4, 2)
+#define PIN_PB30__ISC_D4 PINMUX_PIN(PIN_PB30, 6, 3)
+#define PIN_PB31 63
+#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0)
+#define PIN_PB31__LCDDAT20 PINMUX_PIN(PIN_PB31, 1, 1)
+#define PIN_PB31__A20 PINMUX_PIN(PIN_PB31, 2, 1)
+#define PIN_PB31__FLEXCOM0_IO3 PINMUX_PIN(PIN_PB31, 3, 1)
+#define PIN_PB31__TWD0 PINMUX_PIN(PIN_PB31, 4, 1)
+#define PIN_PB31__ISC_D5 PINMUX_PIN(PIN_PB31, 6, 3)
+#define PIN_PC0 64
+#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0)
+#define PIN_PC0__LCDDAT21 PINMUX_PIN(PIN_PC0, 1, 1)
+#define PIN_PC0__A23 PINMUX_PIN(PIN_PC0, 2, 1)
+#define PIN_PC0__FLEXCOM0_IO4 PINMUX_PIN(PIN_PC0, 3, 1)
+#define PIN_PC0__TWCK0 PINMUX_PIN(PIN_PC0, 4, 1)
+#define PIN_PC0__ISC_D6 PINMUX_PIN(PIN_PC0, 6, 3)
+#define PIN_PC1 65
+#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0)
+#define PIN_PC1__LCDDAT22 PINMUX_PIN(PIN_PC1, 1, 1)
+#define PIN_PC1__A24 PINMUX_PIN(PIN_PC1, 2, 1)
+#define PIN_PC1__CANTX0 PINMUX_PIN(PIN_PC1, 3, 1)
+#define PIN_PC1__SPI1_SPCK PINMUX_PIN(PIN_PC1, 4, 1)
+#define PIN_PC1__I2SC0_CK PINMUX_PIN(PIN_PC1, 5, 1)
+#define PIN_PC1__ISC_D7 PINMUX_PIN(PIN_PC1, 6, 3)
+#define PIN_PC2 66
+#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0)
+#define PIN_PC2__LCDDAT23 PINMUX_PIN(PIN_PC2, 1, 1)
+#define PIN_PC2__A25 PINMUX_PIN(PIN_PC2, 2, 1)
+#define PIN_PC2__CANRX0 PINMUX_PIN(PIN_PC2, 3, 1)
+#define PIN_PC2__SPI1_MOSI PINMUX_PIN(PIN_PC2, 4, 1)
+#define PIN_PC2__I2SC0_MCK PINMUX_PIN(PIN_PC2, 5, 1)
+#define PIN_PC2__ISC_D8 PINMUX_PIN(PIN_PC2, 6, 3)
+#define PIN_PC3 67
+#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0)
+#define PIN_PC3__LCDPWM PINMUX_PIN(PIN_PC3, 1, 1)
+#define PIN_PC3__NWAIT PINMUX_PIN(PIN_PC3, 2, 1)
+#define PIN_PC3__TIOA1 PINMUX_PIN(PIN_PC3, 3, 1)
+#define PIN_PC3__SPI1_MISO PINMUX_PIN(PIN_PC3, 4, 1)
+#define PIN_PC3__I2SC0_WS PINMUX_PIN(PIN_PC3, 5, 1)
+#define PIN_PC3__ISC_D9 PINMUX_PIN(PIN_PC3, 6, 3)
+#define PIN_PC4 68
+#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0)
+#define PIN_PC4__LCDDISP PINMUX_PIN(PIN_PC4, 1, 1)
+#define PIN_PC4__NWR1_NBS1 PINMUX_PIN(PIN_PC4, 2, 1)
+#define PIN_PC4__TIOB1 PINMUX_PIN(PIN_PC4, 3, 1)
+#define PIN_PC4__SPI1_NPCS0 PINMUX_PIN(PIN_PC4, 4, 1)
+#define PIN_PC4__I2SC0_DI0 PINMUX_PIN(PIN_PC4, 5, 1)
+#define PIN_PC4__ISC_PCK PINMUX_PIN(PIN_PC4, 6, 3)
+#define PIN_PC5 69
+#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0)
+#define PIN_PC5__LCDVSYNC PINMUX_PIN(PIN_PC5, 1, 1)
+#define PIN_PC5__NCS0 PINMUX_PIN(PIN_PC5, 2, 1)
+#define PIN_PC5__TCLK1 PINMUX_PIN(PIN_PC5, 3, 1)
+#define PIN_PC5__SPI1_NPCS1 PINMUX_PIN(PIN_PC5, 4, 1)
+#define PIN_PC5__I2SC0_DO0 PINMUX_PIN(PIN_PC5, 5, 1)
+#define PIN_PC5__ISC_VSYNC PINMUX_PIN(PIN_PC5, 6, 3)
+#define PIN_PC6 70
+#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0)
+#define PIN_PC6__LCDHSYNC PINMUX_PIN(PIN_PC6, 1, 1)
+#define PIN_PC6__NCS1 PINMUX_PIN(PIN_PC6, 2, 1)
+#define PIN_PC6__TWD1 PINMUX_PIN(PIN_PC6, 3, 1)
+#define PIN_PC6__SPI1_NPCS2 PINMUX_PIN(PIN_PC6, 4, 1)
+#define PIN_PC6__ISC_HSYNC PINMUX_PIN(PIN_PC6, 6, 3)
+#define PIN_PC7 71
+#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0)
+#define PIN_PC7__LCDPCK PINMUX_PIN(PIN_PC7, 1, 1)
+#define PIN_PC7__NCS2 PINMUX_PIN(PIN_PC7, 2, 1)
+#define PIN_PC7__TWCK1 PINMUX_PIN(PIN_PC7, 3, 1)
+#define PIN_PC7__SPI1_NPCS3 PINMUX_PIN(PIN_PC7, 4, 1)
+#define PIN_PC7__URXD1 PINMUX_PIN(PIN_PC7, 5, 2)
+#define PIN_PC7__ISC_MCK PINMUX_PIN(PIN_PC7, 6, 3)
+#define PIN_PC8 72
+#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0)
+#define PIN_PC8__LCDDEN PINMUX_PIN(PIN_PC8, 1, 1)
+#define PIN_PC8__NANDRDY PINMUX_PIN(PIN_PC8, 2, 1)
+#define PIN_PC8__FIQ PINMUX_PIN(PIN_PC8, 3, 1)
+#define PIN_PC8__PCK0 PINMUX_PIN(PIN_PC8, 4, 3)
+#define PIN_PC8__UTXD1 PINMUX_PIN(PIN_PC8, 5, 2)
+#define PIN_PC8__ISC_FIELD PINMUX_PIN(PIN_PC8, 6, 3)
+#define PIN_PC9 73
+#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0)
+#define PIN_PC9__FIQ PINMUX_PIN(PIN_PC9, 1, 3)
+#define PIN_PC9__GTSUCOMP PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__TIOA4 PINMUX_PIN(PIN_PC9, 4, 2)
+#define PIN_PC10 74
+#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0)
+#define PIN_PC10__LCDDAT2 PINMUX_PIN(PIN_PC10, 1, 2)
+#define PIN_PC10__GTXCK PINMUX_PIN(PIN_PC10, 2, 1)
+#define PIN_PC10__ISC_D1 PINMUX_PIN(PIN_PC10, 3, 1)
+#define PIN_PC10__TIOB4 PINMUX_PIN(PIN_PC10, 4, 2)
+#define PIN_PC10__CANTX0 PINMUX_PIN(PIN_PC10, 5, 2)
+#define PIN_PC11 75
+#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0)
+#define PIN_PC11__LCDDAT3 PINMUX_PIN(PIN_PC11, 1, 2)
+#define PIN_PC11__GTXEN PINMUX_PIN(PIN_PC11, 2, 1)
+#define PIN_PC11__ISC_D2 PINMUX_PIN(PIN_PC11, 3, 1)
+#define PIN_PC11__TCLK4 PINMUX_PIN(PIN_PC11, 4, 2)
+#define PIN_PC11__CANRX0 PINMUX_PIN(PIN_PC11, 5, 2)
+#define PIN_PC11__A0_NBS0 PINMUX_PIN(PIN_PC11, 6, 2)
+#define PIN_PC12 76
+#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0)
+#define PIN_PC12__LCDDAT4 PINMUX_PIN(PIN_PC12, 1, 2)
+#define PIN_PC12__GRXDV PINMUX_PIN(PIN_PC12, 2, 1)
+#define PIN_PC12__ISC_D3 PINMUX_PIN(PIN_PC12, 3, 1)
+#define PIN_PC12__URXD3 PINMUX_PIN(PIN_PC12, 4, 1)
+#define PIN_PC12__TK0 PINMUX_PIN(PIN_PC12, 5, 2)
+#define PIN_PC12__A1 PINMUX_PIN(PIN_PC12, 6, 2)
+#define PIN_PC13 77
+#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0)
+#define PIN_PC13__LCDDAT5 PINMUX_PIN(PIN_PC13, 1, 2)
+#define PIN_PC13__GRXER PINMUX_PIN(PIN_PC13, 2, 1)
+#define PIN_PC13__ISC_D4 PINMUX_PIN(PIN_PC13, 3, 1)
+#define PIN_PC13__UTXD3 PINMUX_PIN(PIN_PC13, 4, 1)
+#define PIN_PC13__TF0 PINMUX_PIN(PIN_PC13, 5, 2)
+#define PIN_PC13__A2 PINMUX_PIN(PIN_PC13, 6, 2)
+#define PIN_PC14 78
+#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0)
+#define PIN_PC14__LCDDAT6 PINMUX_PIN(PIN_PC14, 1, 2)
+#define PIN_PC14__GRX0 PINMUX_PIN(PIN_PC14, 2, 1)
+#define PIN_PC14__ISC_D5 PINMUX_PIN(PIN_PC14, 3, 1)
+#define PIN_PC14__TDO PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__A3 PINMUX_PIN(PIN_PC14, 6, 2)
+#define PIN_PC15 79
+#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0)
+#define PIN_PC15__LCDDAT7 PINMUX_PIN(PIN_PC15, 1, 2)
+#define PIN_PC15__GRX1 PINMUX_PIN(PIN_PC15, 2, 1)
+#define PIN_PC15__ISC_D6 PINMUX_PIN(PIN_PC15, 3, 1)
+#define PIN_PC15__RD0 PINMUX_PIN(PIN_PC15, 5, 2)
+#define PIN_PC15__A4 PINMUX_PIN(PIN_PC15, 6, 2)
+#define PIN_PC16 80
+#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0)
+#define PIN_PC16__LCDDAT10 PINMUX_PIN(PIN_PC16, 1, 2)
+#define PIN_PC16__GTX0 PINMUX_PIN(PIN_PC16, 2, 1)
+#define PIN_PC16__ISC_D7 PINMUX_PIN(PIN_PC16, 3, 1)
+#define PIN_PC16__RK0 PINMUX_PIN(PIN_PC16, 5, 2)
+#define PIN_PC16__A5 PINMUX_PIN(PIN_PC16, 6, 2)
+#define PIN_PC17 81
+#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0)
+#define PIN_PC17__LCDDAT11 PINMUX_PIN(PIN_PC17, 1, 2)
+#define PIN_PC17__GTX1 PINMUX_PIN(PIN_PC17, 2, 1)
+#define PIN_PC17__ISC_D8 PINMUX_PIN(PIN_PC17, 3, 1)
+#define PIN_PC17__RF0 PINMUX_PIN(PIN_PC17, 5, 2)
+#define PIN_PC17__A6 PINMUX_PIN(PIN_PC17, 6, 2)
+#define PIN_PC18 82
+#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0)
+#define PIN_PC18__LCDDAT12 PINMUX_PIN(PIN_PC18, 1, 2)
+#define PIN_PC18__GMDC PINMUX_PIN(PIN_PC18, 2, 1)
+#define PIN_PC18__ISC_D9 PINMUX_PIN(PIN_PC18, 3, 1)
+#define PIN_PC18__FLEXCOM3_IO2 PINMUX_PIN(PIN_PC18, 5, 2)
+#define PIN_PC18__A7 PINMUX_PIN(PIN_PC18, 6, 2)
+#define PIN_PC19 83
+#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0)
+#define PIN_PC19__LCDDAT13 PINMUX_PIN(PIN_PC19, 1, 2)
+#define PIN_PC19__GMDIO PINMUX_PIN(PIN_PC19, 2, 1)
+#define PIN_PC19__ISC_D10 PINMUX_PIN(PIN_PC19, 3, 1)
+#define PIN_PC19__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC19, 5, 2)
+#define PIN_PC19__A8 PINMUX_PIN(PIN_PC19, 6, 2)
+#define PIN_PC20 84
+#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0)
+#define PIN_PC20__LCDDAT14 PINMUX_PIN(PIN_PC20, 1, 2)
+#define PIN_PC20__GRXCK PINMUX_PIN(PIN_PC20, 2, 1)
+#define PIN_PC20__ISC_D11 PINMUX_PIN(PIN_PC20, 3, 1)
+#define PIN_PC20__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC20, 5, 2)
+#define PIN_PC20__A9 PINMUX_PIN(PIN_PC20, 6, 2)
+#define PIN_PC21 85
+#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0)
+#define PIN_PC21__LCDDAT15 PINMUX_PIN(PIN_PC21, 1, 2)
+#define PIN_PC21__GTXER PINMUX_PIN(PIN_PC21, 2, 1)
+#define PIN_PC21__ISC_PCK PINMUX_PIN(PIN_PC21, 3, 1)
+#define PIN_PC21__FLEXCOM3_IO3 PINMUX_PIN(PIN_PC21, 5, 2)
+#define PIN_PC21__A10 PINMUX_PIN(PIN_PC21, 6, 2)
+#define PIN_PC22 86
+#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0)
+#define PIN_PC22__LCDDAT18 PINMUX_PIN(PIN_PC22, 1, 2)
+#define PIN_PC22__GCRS PINMUX_PIN(PIN_PC22, 2, 1)
+#define PIN_PC22__ISC_VSYNC PINMUX_PIN(PIN_PC22, 3, 1)
+#define PIN_PC22__FLEXCOM3_IO4 PINMUX_PIN(PIN_PC22, 5, 2)
+#define PIN_PC22__A11 PINMUX_PIN(PIN_PC22, 6, 2)
+#define PIN_PC23 87
+#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0)
+#define PIN_PC23__LCDDAT19 PINMUX_PIN(PIN_PC23, 1, 2)
+#define PIN_PC23__GCOL PINMUX_PIN(PIN_PC23, 2, 1)
+#define PIN_PC23__ISC_HSYNC PINMUX_PIN(PIN_PC23, 3, 1)
+#define PIN_PC23__A12 PINMUX_PIN(PIN_PC23, 6, 2)
+#define PIN_PC24 88
+#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0)
+#define PIN_PC24__LCDDAT20 PINMUX_PIN(PIN_PC24, 1, 2)
+#define PIN_PC24__GRX2 PINMUX_PIN(PIN_PC24, 2, 1)
+#define PIN_PC24__ISC_MCK PINMUX_PIN(PIN_PC24, 3, 1)
+#define PIN_PC24__A13 PINMUX_PIN(PIN_PC24, 6, 2)
+#define PIN_PC25 89
+#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0)
+#define PIN_PC25__LCDDAT21 PINMUX_PIN(PIN_PC25, 1, 2)
+#define PIN_PC25__GRX3 PINMUX_PIN(PIN_PC25, 2, 1)
+#define PIN_PC25__ISC_FIELD PINMUX_PIN(PIN_PC25, 3, 1)
+#define PIN_PC25__A14 PINMUX_PIN(PIN_PC25, 6, 2)
+#define PIN_PC26 90
+#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0)
+#define PIN_PC26__LCDDAT22 PINMUX_PIN(PIN_PC26, 1, 2)
+#define PIN_PC26__GTX2 PINMUX_PIN(PIN_PC26, 2, 1)
+#define PIN_PC26__CANTX1 PINMUX_PIN(PIN_PC26, 4, 1)
+#define PIN_PC26__A15 PINMUX_PIN(PIN_PC26, 6, 2)
+#define PIN_PC27 91
+#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0)
+#define PIN_PC27__LCDDAT23 PINMUX_PIN(PIN_PC27, 1, 2)
+#define PIN_PC27__GTX3 PINMUX_PIN(PIN_PC27, 2, 1)
+#define PIN_PC27__PCK1 PINMUX_PIN(PIN_PC27, 3, 2)
+#define PIN_PC27__CANRX1 PINMUX_PIN(PIN_PC27, 4, 1)
+#define PIN_PC27__TWD0 PINMUX_PIN(PIN_PC27, 5, 2)
+#define PIN_PC27__A16 PINMUX_PIN(PIN_PC27, 6, 2)
+#define PIN_PC28 92
+#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0)
+#define PIN_PC28__LCDPWM PINMUX_PIN(PIN_PC28, 1, 2)
+#define PIN_PC28__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC28, 2, 1)
+#define PIN_PC28__PCK2 PINMUX_PIN(PIN_PC28, 3, 2)
+#define PIN_PC28__TWCK0 PINMUX_PIN(PIN_PC28, 5, 2)
+#define PIN_PC28__A17 PINMUX_PIN(PIN_PC28, 6, 2)
+#define PIN_PC29 93
+#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0)
+#define PIN_PC29__LCDDISP PINMUX_PIN(PIN_PC29, 1, 2)
+#define PIN_PC29__FLEXCOM4_IO1 PINMUX_PIN(PIN_PC29, 2, 1)
+#define PIN_PC29__A18 PINMUX_PIN(PIN_PC29, 6, 2)
+#define PIN_PC30 94
+#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0)
+#define PIN_PC30__LCDVSYNC PINMUX_PIN(PIN_PC30, 1, 2)
+#define PIN_PC30__FLEXCOM4_IO2 PINMUX_PIN(PIN_PC30, 2, 1)
+#define PIN_PC30__A19 PINMUX_PIN(PIN_PC30, 6, 2)
+#define PIN_PC31 95
+#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0)
+#define PIN_PC31__LCDHSYNC PINMUX_PIN(PIN_PC31, 1, 2)
+#define PIN_PC31__FLEXCOM4_IO3 PINMUX_PIN(PIN_PC31, 2, 1)
+#define PIN_PC31__URXD3 PINMUX_PIN(PIN_PC31, 3, 2)
+#define PIN_PC31__A20 PINMUX_PIN(PIN_PC31, 6, 2)
+#define PIN_PD0 96
+#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0)
+#define PIN_PD0__LCDPCK PINMUX_PIN(PIN_PD0, 1, 2)
+#define PIN_PD0__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD0, 2, 1)
+#define PIN_PD0__UTXD3 PINMUX_PIN(PIN_PD0, 3, 2)
+#define PIN_PD0__GTSUCOMP PINMUX_PIN(PIN_PD0, 4, 2)
+#define PIN_PD0__A23 PINMUX_PIN(PIN_PD0, 6, 2)
+#define PIN_PD1 97
+#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0)
+#define PIN_PD1__LCDDEN PINMUX_PIN(PIN_PD1, 1, 2)
+#define PIN_PD1__GRXCK PINMUX_PIN(PIN_PD1, 4, 2)
+#define PIN_PD1__A24 PINMUX_PIN(PIN_PD1, 6, 2)
+#define PIN_PD2 98
+#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0)
+#define PIN_PD2__URXD1 PINMUX_PIN(PIN_PD2, 1, 1)
+#define PIN_PD2__GTXER PINMUX_PIN(PIN_PD2, 4, 2)
+#define PIN_PD2__ISC_MCK PINMUX_PIN(PIN_PD2, 5, 2)
+#define PIN_PD2__A25 PINMUX_PIN(PIN_PD2, 6, 2)
+#define PIN_PD3 99
+#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0)
+#define PIN_PD3__UTXD1 PINMUX_PIN(PIN_PD3, 1, 1)
+#define PIN_PD3__FIQ PINMUX_PIN(PIN_PD3, 2, 2)
+#define PIN_PD3__GCRS PINMUX_PIN(PIN_PD3, 4, 2)
+#define PIN_PD3__ISC_D11 PINMUX_PIN(PIN_PD3, 5, 2)
+#define PIN_PD3__NWAIT PINMUX_PIN(PIN_PD3, 6, 2)
+#define PIN_PD4 100
+#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0)
+#define PIN_PD4__TWD1 PINMUX_PIN(PIN_PD4, 1, 2)
+#define PIN_PD4__URXD2 PINMUX_PIN(PIN_PD4, 2, 1)
+#define PIN_PD4__GCOL PINMUX_PIN(PIN_PD4, 4, 2)
+#define PIN_PD4__ISC_D10 PINMUX_PIN(PIN_PD4, 5, 2)
+#define PIN_PD4__NCS0 PINMUX_PIN(PIN_PD4, 6, 2)
+#define PIN_PD5 101
+#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0)
+#define PIN_PD5__TWCK1 PINMUX_PIN(PIN_PD5, 1, 2)
+#define PIN_PD5__UTXD2 PINMUX_PIN(PIN_PD5, 2, 1)
+#define PIN_PD5__GRX2 PINMUX_PIN(PIN_PD5, 4, 2)
+#define PIN_PD5__ISC_D9 PINMUX_PIN(PIN_PD5, 5, 2)
+#define PIN_PD5__NCS1 PINMUX_PIN(PIN_PD5, 6, 2)
+#define PIN_PD6 102
+#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0)
+#define PIN_PD6__TCK PINMUX_PIN(PIN_PD6, 1, 2)
+#define PIN_PD6__PCK1 PINMUX_PIN(PIN_PD6, 2, 1)
+#define PIN_PD6__GRX3 PINMUX_PIN(PIN_PD6, 4, 2)
+#define PIN_PD6__ISC_D8 PINMUX_PIN(PIN_PD6, 5, 2)
+#define PIN_PD6__NCS2 PINMUX_PIN(PIN_PD6, 6, 2)
+#define PIN_PD7 103
+#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0)
+#define PIN_PD7__TDI PINMUX_PIN(PIN_PD7, 1, 2)
+#define PIN_PD7__UTMI_RXVAL PINMUX_PIN(PIN_PD7, 3, 1)
+#define PIN_PD7__GTX2 PINMUX_PIN(PIN_PD7, 4, 2)
+#define PIN_PD7__ISC_D0 PINMUX_PIN(PIN_PD7, 5, 2)
+#define PIN_PD7__NWR1_NBS1 PINMUX_PIN(PIN_PD7, 6, 2)
+#define PIN_PD8 104
+#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0)
+#define PIN_PD8__TDO PINMUX_PIN(PIN_PD8, 1, 2)
+#define PIN_PD8__UTMI_RXERR PINMUX_PIN(PIN_PD8, 3, 1)
+#define PIN_PD8__GTX3 PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__ISC_D1 PINMUX_PIN(PIN_PD8, 5, 2)
+#define PIN_PD8__NANDRDY PINMUX_PIN(PIN_PD8, 6, 2)
+#define PIN_PD9 105
+#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0)
+#define PIN_PD9__TMS PINMUX_PIN(PIN_PD9, 1, 2)
+#define PIN_PD9__UTMI_RXACT PINMUX_PIN(PIN_PD9, 3, 1)
+#define PIN_PD9__GTXCK PINMUX_PIN(PIN_PD9, 4, 2)
+#define PIN_PD9__ISC_D2 PINMUX_PIN(PIN_PD9, 5, 2)
+#define PIN_PD10 106
+#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0)
+#define PIN_PD10__NTRST PINMUX_PIN(PIN_PD10, 1, 2)
+#define PIN_PD10__UTMI_HDIS PINMUX_PIN(PIN_PD10, 3, 1)
+#define PIN_PD10__GTXEN PINMUX_PIN(PIN_PD10, 4, 2)
+#define PIN_PD10__ISC_D3 PINMUX_PIN(PIN_PD10, 5, 2)
+#define PIN_PD11 107
+#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0)
+#define PIN_PD11__TIOA1 PINMUX_PIN(PIN_PD11, 1, 3)
+#define PIN_PD11__PCK2 PINMUX_PIN(PIN_PD11, 2, 2)
+#define PIN_PD11__UTMI_LS0 PINMUX_PIN(PIN_PD11, 3, 1)
+#define PIN_PD11__GRXDV PINMUX_PIN(PIN_PD11, 4, 2)
+#define PIN_PD11__ISC_D4 PINMUX_PIN(PIN_PD11, 5, 2)
+#define PIN_PD11__ISC_MCK PINMUX_PIN(PIN_PD11, 7, 4)
+#define PIN_PD12 108
+#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0)
+#define PIN_PD12__TIOB1 PINMUX_PIN(PIN_PD12, 1, 3)
+#define PIN_PD12__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD12, 2, 2)
+#define PIN_PD12__UTMI_LS1 PINMUX_PIN(PIN_PD12, 3, 1)
+#define PIN_PD12__GRXER PINMUX_PIN(PIN_PD12, 4, 2)
+#define PIN_PD12__ISC_D5 PINMUX_PIN(PIN_PD12, 5, 2)
+#define PIN_PD12__ISC_D4 PINMUX_PIN(PIN_PD12, 6, 4)
+#define PIN_PD13 109
+#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0)
+#define PIN_PD13__TCLK1 PINMUX_PIN(PIN_PD13, 1, 3)
+#define PIN_PD13__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD13, 2, 2)
+#define PIN_PD13__UTMI_CDRPCSEL0 PINMUX_PIN(PIN_PD13, 3, 1)
+#define PIN_PD13__GRX0 PINMUX_PIN(PIN_PD13, 4, 2)
+#define PIN_PD13__ISC_D6 PINMUX_PIN(PIN_PD13, 5, 2)
+#define PIN_PD13__ISC_D5 PINMUX_PIN(PIN_PD13, 6, 4)
+#define PIN_PD14 110
+#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0)
+#define PIN_PD14__TCK PINMUX_PIN(PIN_PD14, 1, 1)
+#define PIN_PD14__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD14, 2, 2)
+#define PIN_PD14__UTMI_CDRPCSEL1 PINMUX_PIN(PIN_PD14, 3, 1)
+#define PIN_PD14__GRX1 PINMUX_PIN(PIN_PD14, 4, 2)
+#define PIN_PD14__ISC_D7 PINMUX_PIN(PIN_PD14, 5, 2)
+#define PIN_PD14__ISC_D6 PINMUX_PIN(PIN_PD14, 6, 4)
+#define PIN_PD15 111
+#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0)
+#define PIN_PD15__TDI PINMUX_PIN(PIN_PD15, 1, 1)
+#define PIN_PD15__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD15, 2, 2)
+#define PIN_PD15__UTMI_CDRCPDIVEN PINMUX_PIN(PIN_PD15, 3, 1)
+#define PIN_PD15__GTX0 PINMUX_PIN(PIN_PD15, 4, 2)
+#define PIN_PD15__ISC_PCK PINMUX_PIN(PIN_PD15, 5, 2)
+#define PIN_PD15__ISC_D7 PINMUX_PIN(PIN_PD15, 6, 4)
+#define PIN_PD16 112
+#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0)
+#define PIN_PD16__TDO PINMUX_PIN(PIN_PD16, 1, 1)
+#define PIN_PD16__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD16, 2, 2)
+#define PIN_PD16__UTMI_CDRBISTEN PINMUX_PIN(PIN_PD16, 3, 1)
+#define PIN_PD16__GTX1 PINMUX_PIN(PIN_PD16, 4, 2)
+#define PIN_PD16__ISC_VSYNC PINMUX_PIN(PIN_PD16, 5, 2)
+#define PIN_PD16__ISC_D8 PINMUX_PIN(PIN_PD16, 6, 4)
+#define PIN_PD17 113
+#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0)
+#define PIN_PD17__TMS PINMUX_PIN(PIN_PD17, 1, 1)
+#define PIN_PD17__UTMI_CDRCPSELDIV PINMUX_PIN(PIN_PD17, 3, 1)
+#define PIN_PD17__GMDC PINMUX_PIN(PIN_PD17, 4, 2)
+#define PIN_PD17__ISC_HSYNC PINMUX_PIN(PIN_PD17, 5, 2)
+#define PIN_PD17__ISC_D9 PINMUX_PIN(PIN_PD17, 6, 4)
+#define PIN_PD18 114
+#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0)
+#define PIN_PD18__NTRST PINMUX_PIN(PIN_PD18, 1, 1)
+#define PIN_PD18__GMDIO PINMUX_PIN(PIN_PD18, 4, 2)
+#define PIN_PD18__ISC_FIELD PINMUX_PIN(PIN_PD18, 5, 2)
+#define PIN_PD18__ISC_D10 PINMUX_PIN(PIN_PD18, 6, 4)
+#define PIN_PD19 115
+#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0)
+#define PIN_PD19__PCK0 PINMUX_PIN(PIN_PD19, 1, 1)
+#define PIN_PD19__TWD1 PINMUX_PIN(PIN_PD19, 2, 3)
+#define PIN_PD19__URXD2 PINMUX_PIN(PIN_PD19, 3, 3)
+#define PIN_PD19__I2SC0_CK PINMUX_PIN(PIN_PD19, 5, 2)
+#define PIN_PD19__ISC_D11 PINMUX_PIN(PIN_PD19, 6, 4)
+#define PIN_PD20 116
+#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0)
+#define PIN_PD20__TIOA2 PINMUX_PIN(PIN_PD20, 1, 3)
+#define PIN_PD20__TWCK1 PINMUX_PIN(PIN_PD20, 2, 3)
+#define PIN_PD20__UTXD2 PINMUX_PIN(PIN_PD20, 3, 3)
+#define PIN_PD20__I2SC0_MCK PINMUX_PIN(PIN_PD20, 5, 2)
+#define PIN_PD20__ISC_PCK PINMUX_PIN(PIN_PD20, 6, 4)
+#define PIN_PD21 117
+#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0)
+#define PIN_PD21__TIOB2 PINMUX_PIN(PIN_PD21, 1, 3)
+#define PIN_PD21__TWD0 PINMUX_PIN(PIN_PD21, 2, 4)
+#define PIN_PD21__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD21, 3, 3)
+#define PIN_PD21__I2SC0_WS PINMUX_PIN(PIN_PD21, 5, 2)
+#define PIN_PD21__ISC_VSYNC PINMUX_PIN(PIN_PD21, 6, 4)
+#define PIN_PD22 118
+#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0)
+#define PIN_PD22__TCLK2 PINMUX_PIN(PIN_PD22, 1, 3)
+#define PIN_PD22__TWCK0 PINMUX_PIN(PIN_PD22, 2, 4)
+#define PIN_PD22__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD22, 3, 3)
+#define PIN_PD22__I2SC0_DI0 PINMUX_PIN(PIN_PD22, 5, 2)
+#define PIN_PD22__ISC_HSYNC PINMUX_PIN(PIN_PD22, 6, 4)
+#define PIN_PD23 119
+#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0)
+#define PIN_PD23__URXD2 PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD23__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD23__I2SC0_DO0 PINMUX_PIN(PIN_PD23, 5, 2)
+#define PIN_PD23__ISC_FIELD PINMUX_PIN(PIN_PD23, 6, 4)
+#define PIN_PD24 120
+#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0)
+#define PIN_PD24__UTXD2 PINMUX_PIN(PIN_PD23, 1, 2)
+#define PIN_PD24__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD23, 3, 3)
+#define PIN_PD25 121
+#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0)
+#define PIN_PD25__SPI1_SPCK PINMUX_PIN(PIN_PD25, 1, 3)
+#define PIN_PD25__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD25, 3, 3)
+#define PIN_PD26 122
+#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0)
+#define PIN_PD26__SPI1_MOSI PINMUX_PIN(PIN_PD26, 1, 3)
+#define PIN_PD26__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD26, 3, 2)
+#define PIN_PD27 123
+#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0)
+#define PIN_PD27__SPI1_MISO PINMUX_PIN(PIN_PD27, 1, 3)
+#define PIN_PD27__TCK PINMUX_PIN(PIN_PD27, 2, 3)
+#define PIN_PD27__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD27, 3, 2)
+#define PIN_PD28 124
+#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0)
+#define PIN_PD28__SPI1_NPCS0 PINMUX_PIN(PIN_PD28, 1, 3)
+#define PIN_PD28__TCI PINMUX_PIN(PIN_PD28, 2, 3)
+#define PIN_PD28__FLEXCOM2_IO2 PINMUX_PIN(PIN_PD28, 3, 2)
+#define PIN_PD29 125
+#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0)
+#define PIN_PD29__SPI1_NPCS1 PINMUX_PIN(PIN_PD29, 1, 3)
+#define PIN_PD29__TDO PINMUX_PIN(PIN_PD29, 2, 3)
+#define PIN_PD29__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD29, 3, 2)
+#define PIN_PD29__TIOA3 PINMUX_PIN(PIN_PD29, 4, 3)
+#define PIN_PD29__TWD0 PINMUX_PIN(PIN_PD29, 5, 3)
+#define PIN_PD30 126
+#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0)
+#define PIN_PD30__SPI1_NPCS2 PINMUX_PIN(PIN_PD30, 1, 3)
+#define PIN_PD30__TMS PINMUX_PIN(PIN_PD30, 2, 3)
+#define PIN_PD30__FLEXCOM2_IO4 PINMUX_PIN(PIN_PD30, 3, 2)
+#define PIN_PD30__TIOB3 PINMUX_PIN(PIN_PD30, 4, 3)
+#define PIN_PD30__TWCK0 PINMUX_PIN(PIN_PD30, 5, 3)
+#define PIN_PD31 127
+#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0)
+#define PIN_PD31__ADTRG PINMUX_PIN(PIN_PD31, 1, 1)
+#define PIN_PD31__NTRST PINMUX_PIN(PIN_PD31, 2, 3)
+#define PIN_PD31__IRQ PINMUX_PIN(PIN_PD31, 3, 4)
+#define PIN_PD31__TCLK3 PINMUX_PIN(PIN_PD31, 4, 3)
+#define PIN_PD31__PCK0 PINMUX_PIN(PIN_PD31, 5, 2)
adc_op_clk: adc_op_clk{
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <20000000>;
+ clock-frequency = <1000000>;
};
};
atmel,adc-use-external-triggers;
atmel,adc-vref = <3000>;
atmel,adc-res = <10 12>;
+ atmel,adc-sample-hold-time = <11>;
atmel,adc-res-names = "lowres", "highres";
status = "disabled";
isi_0: endpoint {
remote-endpoint = <&ov2640_0>;
bus-width = <8>;
+ vsync-active = <1>;
+ hsync-active = <1>;
};
};
};
reg = <0xf8018000 0x4000>;
interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>;
dmas = <&dma1
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(4)>,
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(4))>,
<&dma1
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
- AT91_XDMAC_DT_PERID(5)>;
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(5))>;
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
dma-names = "tx", "rx";
clocks = <&aes_clk>;
clock-names = "aes_clk";
- status = "disabled";
+ status = "okay";
};
tdes@fc04c000 {
dma-names = "tx", "rx";
clocks = <&tdes_clk>;
clock-names = "tdes_clk";
- status = "disabled";
+ status = "okay";
};
sha@fc050000 {
dma-names = "tx";
clocks = <&sha_clk>;
clock-names = "sha_clk";
- status = "disabled";
+ status = "okay";
};
rstc@fc068600 {
0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */
0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */
0xffffffff 0x3ff83fff 0xff00ffff /* pioC */
- 0x00000000 0x00000000 0x00000000 /* pioD */
+ 0x0003ff00 0x8002a800 0x00000000 /* pioD */
0xffffffff 0x7fffffff 0x76fff1bf /* pioE */
>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioD_clk>;
- status = "disabled";
};
pioE: gpio@fc06d000 {
};
accelerometer@1d {
- compatible = "adi,adxl34x";
+ compatible = "adi,adxl345";
reg = <0x1d>;
interrupt-parent = <&irqpin3>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
compatible = "snps,designware-i2c";
reg = <0xffc02200 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,designware-i2c";
reg = <0xffc02300 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,designware-i2c";
reg = <0xffc02400 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,designware-i2c";
reg = <0xffc02500 0x100>;
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,designware-i2c";
reg = <0xffc02600 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ clocks = <&l4_sp_clk>;
status = "disabled";
};
compatible = "snps,dwc2";
reg = <0xffb40000 0xffff>;
interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_clk>;
+ clock-names = "otg";
phys = <&usbphy0>;
phy-names = "usb2-phy";
status = "disabled";
status = "okay";
};
+&i2c1 {
+ speed-mode = <0>;
+ status = "okay";
+
+ /*
+ * adjust the falling times to decrease the i2c frequency to 50Khz
+ * because the LCD module does not work at the standard 100Khz
+ */
+ i2c-sda-falling-time-ns = <6000>;
+ i2c-scl-falling-time-ns = <6000>;
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
&uart1 {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+};
<ST_IRQ_SYSCFG_DISABLED>;
};
+ /* Display */
+ vtg_main: sti-vtg-main@8d02800 {
+ compatible = "st,vtg";
+ reg = <0x8d02800 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux@8d00200 {
+ compatible = "st,vtg";
+ reg = <0x8d00200 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ };
+
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
status = "disabled";
};
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
status = "disabled";
};
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3_default>;
status = "disabled";
};
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi4_default>;
status = "disabled";
};
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi10_default>;
status = "disabled";
};
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi11_default>;
status = "disabled";
};
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_sysin>;
clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi12_default>;
status = "disabled";
};
/* COMMS PWM Module */
pwm0: pwm@9810000 {
compatible = "st,sti-pwm";
- status = "okay";
#pwm-cells = <2>;
reg = <0x9810000 0x68>;
pinctrl-names = "default";
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <1>;
+
+ status = "disabled";
};
/* SBC PWM Module */
pwm1: pwm@9510000 {
compatible = "st,sti-pwm";
- status = "okay";
#pwm-cells = <2>;
reg = <0x9510000 0x68>;
pinctrl-names = "default";
clock-names = "pwm";
clocks = <&clk_sysin>;
st,pwm-num-chan = <4>;
+
+ status = "disabled";
+ };
+
+ rng10: rng@08a89000 {
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ rng11: rng@08a8a000 {
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
};
};
};
reg = <0x0961f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09610000 0x6000>;
pio0: gpio@09610000 {
st,retime-pin-mask = <0x3f>;
};
+ cec0 {
+ pinctrl_cec0_default: cec0-default {
+ st,pins {
+ hdmi_cec = <&pio2 4 ALT1 BIDIR>;
+ };
+ };
+ };
+
rc {
pinctrl_ir: ir0 {
st,pins {
ir = <&pio4 0 ALT2 IN>;
};
};
+
+ pinctrl_uhf: uhf0 {
+ st,pins {
+ ir = <&pio4 1 ALT2 IN>;
+ };
+ };
+
+ pinctrl_tx: tx0 {
+ st,pins {
+ tx = <&pio4 2 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_tx_od: tx_od0 {
+ st,pins {
+ tx_od = <&pio4 3 ALT2 OUT>;
+ };
+ };
};
/* SBC_ASC0 - UART10 */
phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
};
};
+
+ pinctrl_rmii1: rmii1-0 {
+ st,pins {
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ };
+ };
+
+ pinctrl_rmii1_phyclk: rmii1_phyclk {
+ st,pins {
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+
+ pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext {
+ st,pins {
+ phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>;
+ };
+ };
};
pwm1 {
};
};
};
+
+ spi10 {
+ pinctrl_spi10_default: spi10-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio4 6 ALT1 OUT>;
+ mrst = <&pio4 7 ALT1 IN>;
+ scl = <&pio4 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio4 6 ALT1 BIDIR_PU>;
+ scl = <&pio4 5 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi11 {
+ pinctrl_spi11_default: spi11-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 1 ALT2 OUT>;
+ mrst = <&pio3 0 ALT2 IN>;
+ scl = <&pio3 2 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 1 ALT2 BIDIR_PU>;
+ scl = <&pio3 2 ALT2 OUT>;
+ };
+ };
+ };
+
+ spi12 {
+ pinctrl_spi12_default: spi12-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 6 ALT2 OUT>;
+ mrst = <&pio3 4 ALT2 IN>;
+ scl = <&pio3 7 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio3 6 ALT2 BIDIR_PU>;
+ scl = <&pio3 7 ALT2 OUT>;
+ };
+ };
+ };
};
pin-controller-front0 {
reg = <0x0920f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09200000 0x10000>;
pio10: pio@09200000 {
};
i2c3 {
- pinctrl_i2c3_default: i2c3-default {
+ pinctrl_i2c3_default: i2c3-alt1-0 {
st,pins {
sda = <&pio18 6 ALT1 BIDIR>;
scl = <&pio18 5 ALT1 BIDIR>;
};
};
+ pinctrl_i2c3_alt1_1: i2c3-alt1-1 {
+ st,pins {
+ sda = <&pio17 7 ALT1 BIDIR>;
+ scl = <&pio17 6 ALT1 BIDIR>;
+ };
+ };
+ pinctrl_i2c3_alt3_0: i2c3-alt3-0 {
+ st,pins {
+ sda = <&pio13 6 ALT3 BIDIR>;
+ scl = <&pio13 5 ALT3 BIDIR>;
+ };
+ };
};
spi0 {
- pinctrl_spi0_default: spi0-default {
+ pinctrl_spi0_default: spi0-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio10 6 ALT2 OUT>;
+ mrst = <&pio10 7 ALT2 IN>;
+ scl = <&pio10 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio10 6 ALT2 BIDIR_PU>;
+ scl = <&pio10 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio19 7 ALT1 OUT>;
+ mrst = <&pio19 5 ALT1 IN>;
+ scl = <&pio19 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 {
st,pins {
- mtsr = <&pio12 6 ALT2 BIDIR>;
- mrst = <&pio12 7 ALT2 BIDIR>;
- scl = <&pio12 5 ALT2 BIDIR>;
+ mtsr = <&pio19 7 ALT1 BIDIR_PU>;
+ scl = <&pio19 6 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1_default: spi1-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio11 1 ALT2 OUT>;
+ mrst = <&pio11 2 ALT2 IN>;
+ scl = <&pio11 0 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio11 1 ALT2 BIDIR_PU>;
+ scl = <&pio11 0 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 3 ALT1 OUT>;
+ mrst = <&pio14 4 ALT1 IN>;
+ scl = <&pio14 2 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 3 ALT1 BIDIR_PU>;
+ scl = <&pio14 2 ALT1 OUT>;
+ };
+ };
+ };
+
+ spi2 {
+ pinctrl_spi2_default: spi2-4w-alt2-0 {
+ st,pins {
+ mtsr = <&pio12 6 ALT2 OUT>;
+ mrst = <&pio12 7 ALT2 IN>;
+ scl = <&pio12 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 {
+ st,pins {
+ mtsr = <&pio12 6 ALT2 BIDIR_PU>;
+ scl = <&pio12 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 6 ALT1 OUT>;
+ mrst = <&pio14 7 ALT1 IN>;
+ scl = <&pio14 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio14 6 ALT1 BIDIR_PU>;
+ scl = <&pio14 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 {
+ st,pins {
+ mtsr = <&pio15 6 ALT2 OUT>;
+ mrst = <&pio15 7 ALT2 IN>;
+ scl = <&pio15 5 ALT2 OUT>;
+ };
+ };
+
+ pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 {
+ st,pins {
+ mtsr = <&pio15 6 ALT2 BIDIR_PU>;
+ scl = <&pio15 5 ALT2 OUT>;
+ };
+ };
+ };
+
+ spi3 {
+ pinctrl_spi3_default: spi3-4w-alt3-0 {
+ st,pins {
+ mtsr = <&pio13 6 ALT3 OUT>;
+ mrst = <&pio13 7 ALT3 IN>;
+ scl = <&pio13 5 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 {
+ st,pins {
+ mtsr = <&pio13 6 ALT3 BIDIR_PU>;
+ scl = <&pio13 5 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio17 7 ALT1 OUT>;
+ mrst = <&pio17 5 ALT1 IN>;
+ scl = <&pio17 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio17 7 ALT1 BIDIR_PU>;
+ scl = <&pio17 6 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 {
+ st,pins {
+ mtsr = <&pio18 6 ALT1 OUT>;
+ mrst = <&pio18 7 ALT1 IN>;
+ scl = <&pio18 5 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 {
+ st,pins {
+ mtsr = <&pio18 6 ALT1 BIDIR_PU>;
+ scl = <&pio18 5 ALT1 OUT>;
};
};
};
};
};
};
+
+ systrace {
+ pinctrl_systrace_default: systrace-default {
+ st,pins {
+ trc_data0 = <&pio11 3 ALT5 OUT>;
+ trc_data1 = <&pio11 4 ALT5 OUT>;
+ trc_data2 = <&pio11 5 ALT5 OUT>;
+ trc_data3 = <&pio11 6 ALT5 OUT>;
+ trc_clk = <&pio11 7 ALT5 OUT>;
+ };
+ };
+ };
};
pin-controller-front1 {
reg = <0x0921f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09210000 0x10000>;
tsin4 {
reg = <0x0922f080 0x4>;
reg-names = "irqmux";
interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
- interrupts-names = "irqmux";
+ interrupt-names = "irqmux";
ranges = <0 0x09220000 0x6000>;
pio30: gpio@09220000 {
};
};
};
+
+ spi4 {
+ pinctrl_spi4_default: spi4-4w-alt1-0 {
+ st,pins {
+ mtsr = <&pio30 1 ALT1 OUT>;
+ mrst = <&pio30 2 ALT1 IN>;
+ scl = <&pio30 0 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 {
+ st,pins {
+ mtsr = <&pio30 1 ALT1 BIDIR_PU>;
+ scl = <&pio30 0 ALT1 OUT>;
+ };
+ };
+
+ pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 {
+ st,pins {
+ mtsr = <&pio34 1 ALT3 OUT>;
+ mrst = <&pio34 2 ALT3 IN>;
+ scl = <&pio34 0 ALT3 OUT>;
+ };
+ };
+
+ pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 {
+ st,pins {
+ mtsr = <&pio34 1 ALT3 BIDIR_PU>;
+ scl = <&pio34 0 ALT3 OUT>;
+ };
+ };
+ };
+
+ serial3 {
+ pinctrl_serial3: serial3-0 {
+ st,pins {
+ tx = <&pio31 3 ALT1 OUT>;
+ rx = <&pio31 4 ALT1 IN>;
+ };
+ };
+ };
};
pin-controller-flash {
emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
};
};
+ pinctrl_sd0: sd0-0 {
+ st,pins {
+ sd_clk = <&pio40 6 ALT1 BIDIR>;
+ sd_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+ sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>;
+ sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>;
+ sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>;
+ sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>;
+ sd_led = <&pio42 0 ALT2 OUT>;
+ sd_pwren = <&pio42 2 ALT2 OUT>;
+ sd_vsel = <&pio42 3 ALT2 OUT>;
+ sd_cd = <&pio42 4 ALT2 IN>;
+ sd_wp = <&pio42 5 ALT2 IN>;
+ };
+ };
+ };
+
+ fsm {
+ pinctrl_fsm: fsm {
+ st,pins {
+ spi-fsm-clk = <&pio40 1 ALT1 OUT>;
+ spi-fsm-cs = <&pio40 0 ALT1 OUT>;
+ spi-fsm-mosi = <&pio40 2 ALT1 OUT>;
+ spi-fsm-miso = <&pio40 3 ALT1 IN>;
+ spi-fsm-hol = <&pio40 5 ALT1 OUT>;
+ spi-fsm-wp = <&pio40 4 ALT1 OUT>;
+ };
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand {
+ st,pins {
+ nand_cs1 = <&pio40 6 ALT3 OUT>;
+ nand_cs0 = <&pio40 7 ALT3 OUT>;
+ nand_d0 = <&pio41 0 ALT3 BIDIR>;
+ nand_d1 = <&pio41 1 ALT3 BIDIR>;
+ nand_d2 = <&pio41 2 ALT3 BIDIR>;
+ nand_d3 = <&pio41 3 ALT3 BIDIR>;
+ nand_d4 = <&pio41 4 ALT3 BIDIR>;
+ nand_d5 = <&pio41 5 ALT3 BIDIR>;
+ nand_d6 = <&pio41 6 ALT3 BIDIR>;
+ nand_d7 = <&pio41 7 ALT3 BIDIR>;
+ nand_we = <&pio42 0 ALT3 OUT>;
+ nand_dqs = <&pio42 1 ALT3 OUT>;
+ nand_ale = <&pio42 2 ALT3 OUT>;
+ nand_cle = <&pio42 3 ALT3 OUT>;
+ nand_rnb = <&pio42 4 ALT3 IN>;
+ nand_oe = <&pio42 5 ALT3 OUT>;
+ };
+ };
};
};
};
#include "stih407-family.dtsi"
/ {
soc {
- /* Display */
- vtg_main: sti-vtg-main@8d02800 {
- compatible = "st,vtg";
- reg = <0x8d02800 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
- };
-
- vtg_aux: sti-vtg-aux@8d00200 {
- compatible = "st,vtg";
- reg = <0x8d00200 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
- };
-
sti-display-subsystem {
compatible = "st,sti-display-subsystem";
#address-cells = <1>;
sd-uhs-sdr104;
sd-uhs-ddr50;
};
+
+ usb2_picophy1: phy2 {
+ status = "okay";
+ };
+
+ usb2_picophy2: phy3 {
+ status = "okay";
+ };
+
+ ohci0: usb@9a03c00 {
+ status = "okay";
+ };
+
+ ehci0: usb@9a03e00 {
+ status = "okay";
+ };
+
+ ohci1: usb@9a83c00 {
+ status = "okay";
+ };
+
+ ehci1: usb@9a83e00 {
+ status = "okay";
+ };
};
};
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY0_RESET>;
reset-names = "global", "port";
+
+ status = "disabled";
};
usb2_picophy2: phy3 {
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY1_RESET>;
reset-names = "global", "port";
+
+ status = "disabled";
};
ohci0: usb@9a03c00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
+
+ status = "disabled";
};
ehci0: usb@9a03e00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
+
+ status = "disabled";
};
ohci1: usb@9a83c00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
+
+ status = "disabled";
};
ehci1: usb@9a83e00 {
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
- };
-
- /* Display */
- vtg_main: sti-vtg-main@8d02800 {
- compatible = "st,vtg";
- reg = <0x8d02800 0x200>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
- };
- vtg_aux: sti-vtg-aux@8d00200 {
- compatible = "st,vtg";
- reg = <0x8d00200 0x100>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ status = "disabled";
};
sti-display-subsystem {
phys = <&usb2_picophy2>;
phy-names = "usb";
};
+
+ mmc0: sdhci@09060000 {
+ assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+ assigned-clock-parents = <&clk_s_c0_pll1 0>;
+ assigned-clock-rates = <200000000>;
+ };
};
};
};
};
+ pwm0: pwm@9810000 {
+ status = "okay";
+ };
+
+ pwm1: pwm@9510000 {
+ status = "okay";
+ };
+
i2c@9842000 {
status = "okay";
};
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
&lradc {
vref-supply = <®_vcc3v0>;
status = "okay";
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Gemei G9 Tablet";
/*
* TODO:
* 2x cameras via CSI
- * bma250 IRQs
+ * audio
* AXP battery management
* NAND
* OTG
bma250@18 {
compatible = "bosch,bma250";
reg = <0x18>;
-
- /*
- * TODO: interrupt pins:
- * int1 - PH00
- * int2 - PI10
- */
+ interrupt-parent = <&pio>;
+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "iNet-1";
+ compatible = "inet-tek,inet1", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@1000 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <1000000>;
+ };
+
+ button@1200 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <1200000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "INet-97F Rev 02";
};
};
-&ehci0 {
- status = "okay";
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
};
&ehci1 {
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@600 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+
+ button@800 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <800000>;
+ };
+
+ button@1000 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <1000000>;
+ };
- interrupt-controller;
- #interrupt-cells = <1>;
+ button@1200 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1200000>;
};
};
status = "okay";
};
-&ohci0 {
+&otg_sram {
status = "okay";
};
-&ohci1 {
- status = "okay";
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
};
-®_usb1_vbus {
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
- usb1_vbus-supply = <®_usb1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "iNet-9F Rev 03";
+ compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ /* Accelerometer */
+ bma250@18 {
+ compatible = "bosch,bma250";
+ reg = <0x18>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@600 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+
+ button@800 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <800000>;
+ };
+
+ button@1000 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <1000000>;
+ };
+
+ button@1200 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1200000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
emac_power_pin_q5: emac_power_pin@0 {
allwinner,pins = "PH19";
};
};
+®_usb0_vbus {
+ regulator-boot-on;
+ status = "okay";
+};
+
®_usb1_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
&usbphy {
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
led_pins_marsboard: led_pins@0 {
allwinner,pins = "PB5", "PB6", "PB7", "PB8";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
®_usb1_vbus {
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
&mdio {
status = "okay";
};
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
status = "okay";
};
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Auxtek t003 A10s hdmi tv-stick";
+ compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_t003>;
+
+ red {
+ label = "t003-tv-dongle:red:usr";
+ gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+ default-state = "on";
+ };
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp152: pmic@30 {
+ compatible = "x-powers,axp152";
+ reg = <0x30>;
+ interrupts = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_t003: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ led_pins_t003: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_usb0_vbus {
+ gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ status = "okay";
+};
+
+®_usb1_vbus {
+ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb0_vbus_pin_a {
+ allwinner,pins = "PG13";
+};
+
+&usb1_vbus_pin_a {
+ allwinner,pins = "PB10";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
status = "okay";
at24@50 {
- compatible = "at,24c16";
+ compatible = "atmel,24c16";
pagesize = <16>;
reg = <0x50>;
read-only;
--- /dev/null
+/*
+ * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "A10s-Wobo i5";
+ compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_wobo_i5>;
+
+ blue {
+ label = "a10s-wobo-i5:blue:usr";
+ gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ reg_emac_3v3: emac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_power_pin_wobo>;
+ regulator-name = "emac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_b>;
+ phy = <&phy1>;
+ status = "okay";
+};
+
+&emac_sram {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&mdio {
+ phy-supply = <®_emac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ led_pins_wobo_i5: led_pins@0 {
+ allwinner,pins = "PB2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
+ allwinner,pins = "PB3";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ emac_power_pin_wobo: emac_power_pin@0 {
+ allwinner,pins = "PA02";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_usb1_vbus {
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb1_vbus_pin_a {
+ allwinner,pins = "PG12";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
status = "disabled";
};
+
+ framebuffer@2 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+ <&ahb_gates 44>;
+ status = "disabled";
+ };
};
clocks {
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ emac_pins_b: emac0@1 {
+ allwinner,pins = "PD6", "PD7", "PD10",
+ "PD11", "PD12", "PD13", "PD14",
+ "PD15", "PD18", "PD19", "PD20",
+ "PD21", "PD22", "PD23", "PD24",
+ "PD25", "PD26", "PD27";
+ allwinner,function = "emac";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG3", "PG4", "PG5",
"PG6", "PG7", "PG8";
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "INet-98V Rev 02";
+ compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13";
+
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&lradc {
+ vref-supply = <®_ldo2>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+
+ mmccard: mmccard@0 {
+ reg = <0>;
+ compatible = "mmc-card";
+ broken-hpi;
+ };
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+®_usb0_vbus {
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb0_vbus_pin_a {
+ allwinner,pins = "PG12";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_ldo3>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sun5i-q8-common.dtsi"
+
+/ {
+ model = "Q8 A13 Tablet";
+ compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
+};
+
+®_ldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_ldo3>;
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-q8-common.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+&i2c1 {
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+ cd-inverted;
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_q8: mmc0_cd_pin@0 {
+ allwinner,pins = "PG0";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG2";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PG12";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins_b>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+ usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ i2c_lcd: i2c@0 {
+ /* The lcd panel i2c interface is hooked up via gpios */
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_lcd_pins>;
+ gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
+ <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
+ i2c-gpio,delay-us = <5>;
+ };
};
&ehci1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
+
+ mma8452: mma8452@1d {
+ compatible = "fsl,mma8452";
+ reg = <0x1d>;
+ interrupt-parent = <&pio>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */
+ };
};
&mmc0 {
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ i2c_lcd_pins: i2c_lcd_pin@0 {
+ allwinner,pins = "PA23", "PA24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
®_usb2_vbus {
compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
aliases {
+ rtc0 = &pcf8563;
+ rtc1 = &rtc;
serial0 = &uart0;
};
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
+ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
phy = <&phy1>;
phy-mode = "rgmii";
snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
};
&pio {
+ gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
+ allwinner,pins = "PA21";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
allwinner,pins = "PA8";
allwinner,function = "gpio_in";
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
- dcdc1-supply = <&vcc_3v0>;
- dcdc5-supply = <&vcc_dram>;
regulators {
x-powers,dcdc-freq = <3000>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ mmc2_8bit_emmc_pins: mmc2@0 {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12",
+ "PC13", "PC14", "PC15",
+ "PC24";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
gmac_pins_mii_a: gmac_mii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
reg = <0x01c20ca0 0x20>;
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
rtp: rtp@01c25000 {
compatible = "allwinner,sun6i-a31-ts";
reg = <0x01c25000 0x100>;
--- /dev/null
+/*
+ * Copyright 2015 Lawrence Yu <lyu@micile.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Yones TopTech BS1078 v2 Tablet";
+ compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s";
+
+ aliases {
+ serial0 = &uart0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
+ allwinner,pins = "PA8";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc0_pins_a {
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+®_usb1_vbus {
+ gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usb1_vbus_pin_a {
+ allwinner,pins = "PH27";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
led_pins_cubieboard2: led_pins@0 {
allwinner,pins = "PH20", "PH21";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
®_ahci_5v {
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
#include "axp209.dtsi"
®_dcdc2 {
};
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
--- /dev/null
+/*
+ * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Olimex A20-Olimex-SOM-EVB";
+ compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olimex_som_evb>;
+
+ green {
+ label = "a20-olimex-som-evb:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+};
+
+&ahci {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ led_pins_olimex_som_evb: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+};
+
+®_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
};
};
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
};
&mmc0 {
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
allwinner,pins = "PC3";
allwinner,drive = <SUN4I_PINCTRL_20_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+ allwinner,pins = "PH5";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
+ };
+
+ usb0_vbus_pin_lime2: usb0_vbus_pin@0 {
+ allwinner,pins = "PC17";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
®_ahci_5v {
status = "okay";
};
+®_usb0_vbus {
+ pinctrl-0 = <&usb0_vbus_pin_lime2>;
+ gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
®_usb1_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
};
&i2c2 {
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
regulator-name = "avcc";
};
+®_usb0_vbus {
+ status = "okay";
+};
+
®_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
regulator-name = "avcc";
};
+®_usb0_vbus {
+ status = "okay";
+};
+
®_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_bananapro>;
gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
allwinner,pins = "PH2";
};
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
+#include "axp209.dtsi"
+
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pins_a>;
status = "okay";
};
+&otg_sram {
+ status = "okay";
+};
+
&pio {
led_pins_pcduino3: led_pins@0 {
allwinner,pins = "PH15", "PH16";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
};
®_ahci_5v {
status = "okay";
};
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-pll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
®_usb1_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
};
};
+#include "axp209.dtsi"
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
-#include "axp209.dtsi"
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
®_dcdc2 {
regulator-always-on;
regulator-name = "avcc";
};
+®_usb0_vbus {
+ status = "okay";
+};
+
®_usb1_vbus {
status = "okay";
};
status = "okay";
};
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
--- /dev/null
+/*
+ * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Wits Pro A20 DKT";
+ compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ mmc3_pwrseq: mmc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>;
+ reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_dcdc2>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc3_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&mmc3_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 {
+ allwinner,pins = "PH9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PH4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-name = "vdd-cpu";
+};
+
+®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+};
+
+®_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+®_usb0_vbus {
+ status = "okay";
+};
+
+®_usb1_vbus {
+ status = "okay";
+};
+
+®_usb2_vbus {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
clock-output-names = "ir1";
};
+ keypad_clk: clk@01c200c4 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c200c4 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "keypad";
+ };
+
usb_clk: clk@01c200cc {
#clock-cells = <1>;
#reset-cells = <1>;
clock-output-names = "apb1";
};
- ahb1_gates: clk@01c20060 {
- #clock-cells = <1>;
- compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
- reg = <0x01c20060 0x8>;
- clocks = <&ahb1>;
- clock-indices = <1>, <6>,
- <8>, <9>, <10>,
- <13>, <14>,
- <19>, <20>,
- <21>, <24>, <26>,
- <29>, <32>, <36>,
- <40>, <44>, <46>,
- <52>, <54>,
- <57>;
- clock-output-names = "ahb1_mipidsi", "ahb1_dma",
- "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
- "ahb1_nand", "ahb1_sdram",
- "ahb1_hstimer", "ahb1_spi0",
- "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
- "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
- "ahb1_csi", "ahb1_be", "ahb1_fe",
- "ahb1_gpu", "ahb1_spinlock",
- "ahb1_drc";
- };
-
apb1_gates: clk@01c20068 {
#clock-cells = <1>;
compatible = "allwinner,sun8i-a23-apb1-gates-clk";
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ pwm0_pins: pwm0 {
+ allwinner,pins = "PH0";
+ allwinner,function = "pwm0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH2", "PH3";
allwinner,function = "i2c0";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
};
+ pwm: pwm@01c21400 {
+ compatible = "allwinner,sun7i-a20-pwm";
+ reg = <0x01c21400 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
lradc: lradc@01c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
#size-cells = <0>;
#gpio-cells = <3>;
+ r_rsb_pins: r_rsb {
+ allwinner,pins = "PL0", "PL1";
+ allwinner,function = "s_rsb";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
r_uart_pins_a: r_uart@0 {
allwinner,pins = "PL2", "PL3";
allwinner,function = "s_uart";
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
+
+ r_rsb: rsb@01f03400 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x01f03400 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <3000000>;
+ resets = <&apb0_rst 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_rsb_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+ model = "Allwinner GT90H Quad Core Tablet (v4)";
+ compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33";
+
+ aliases {
+ serial0 = &r_uart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+
+ button@600 {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ channel = <0>;
+ voltage = <600000>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>;
+ /* FIXME this really is aldo1, correct once we've pmic support */
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_gt90h: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
/dts-v1/;
#include "sun8i-a23.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-q8-common.dtsi"
/ {
model = "Ippo Q8H Dual Core Tablet (v5)";
compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
-
- aliases {
- serial0 = &r_uart;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
};
&i2c2 {
status = "failed";
};
-&lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button@400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- cd-inverted;
- status = "okay";
-};
-
-&pio {
- mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-};
-
-&r_uart {
- pinctrl-names = "default";
- pinctrl-0 = <&r_uart_pins_a>;
- status = "okay";
-};
-
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
&usb_otg {
dr_mode = "host";
status = "okay";
};
clocks {
+ ahb1_gates: clk@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb1>;
+ clock-indices = <1>, <6>,
+ <8>, <9>, <10>,
+ <13>, <14>,
+ <19>, <20>,
+ <21>, <24>, <26>,
+ <29>, <32>, <36>,
+ <40>, <44>, <46>,
+ <52>, <53>,
+ <54>, <57>;
+ clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+ "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+ "ahb1_nand", "ahb1_sdram",
+ "ahb1_hstimer", "ahb1_spi0",
+ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+ "ahb1_csi", "ahb1_be", "ahb1_fe",
+ "ahb1_gpu", "ahb1_msgbox",
+ "ahb1_spinlock", "ahb1_drc";
+ };
+
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
+++ /dev/null
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun8i-a33.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
-
-/ {
- model = "Ippo Q8H Quad Core Tablet (v1.2)";
- compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33";
-
- aliases {
- serial0 = &r_uart;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-};
-
-&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-};
-
-&lradc {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@200 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <200000>;
- };
-
- button@400 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <400000>;
- };
-};
-
-&mmc0 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
- vmmc-supply = <®_vcc3v0>;
- bus-width = <4>;
- cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
- cd-inverted;
- status = "okay";
-};
-
-&pio {
- mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
- allwinner,pins = "PB4";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-};
-
-&r_uart {
- pinctrl-names = "default";
- pinctrl-0 = <&r_uart_pins_a>;
- status = "okay";
-};
-
-/*
- * FIXME for now we only support host mode and rely on u-boot to have
- * turned on Vbus which is controlled by the axp223 pmic on the board.
- *
- * Once we have axp223 support we should switch to fully supporting otg.
- */
-&usb_otg {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
--- /dev/null
+sun8i-a33-q8-tablet.dts
\ No newline at end of file
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sun8i-q8-common.dtsi"
+
+/ {
+ model = "Q8 A33 Tablet";
+ compatible = "allwinner,q8-a33", "allwinner,sun8i-a33";
+};
+
+/*
+ * FIXME for now we only support host mode and rely on u-boot to have
+ * turned on Vbus which is controlled by the axp223 pmic on the board.
+ *
+ * Once we have axp223 support we should switch to fully supporting otg.
+ */
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
};
};
+&r_rsb {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_b>;
clock-output-names = "pll11";
};
+ ahb1_gates: clk@01c20060 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-a33-ahb1-gates-clk";
+ reg = <0x01c20060 0x8>;
+ clocks = <&ahb1>;
+ clock-indices = <1>, <5>,
+ <6>, <8>, <9>,
+ <10>, <13>, <14>,
+ <19>, <20>,
+ <21>, <24>, <26>,
+ <29>, <32>, <36>,
+ <40>, <44>, <46>,
+ <52>, <53>,
+ <54>, <57>,
+ <58>;
+ clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+ "ahb1_dma","ahb1_mmc0", "ahb1_mmc1",
+ "ahb1_mmc2", "ahb1_nand", "ahb1_sdram",
+ "ahb1_hstimer", "ahb1_spi0",
+ "ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+ "ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+ "ahb1_csi", "ahb1_be", "ahb1_fe",
+ "ahb1_gpu", "ahb1_msgbox",
+ "ahb1_spinlock", "ahb1_drc",
+ "ahb1_sat";
+ };
+
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 0>;
+ clock-output-names = "ss";
+ };
+
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun8i-a23-mbus-clk";
};
soc@01c00000 {
+ crypto: crypto-engine@01c15000 {
+ compatible = "allwinner,sun4i-a10-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb1_gates 5>, <&ss_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 5>;
+ reset-names = "ahb";
+ };
+
usb_otg: usb@01c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include "sunxi-q8-common.dtsi"
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ aliases {
+ serial0 = &r_uart;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en_pin_q8>;
+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <8>;
+ enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+ /* backlight is powered by AXP223 DC1SW */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+ cd-inverted;
+ status = "okay";
+};
+
+&pio {
+ bl_en_pin_q8: bl_en_pin@0 {
+ allwinner,pins = "PH6";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_q8: mmc0_cd_pin@0 {
+ allwinner,pins = "PB4";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+&r_rsb {
+ status = "okay";
+};
+
+&r_uart {
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_uart_pins_a>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sunxi-common-regulators.dtsi"
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+};
+
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@200 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <200000>;
+ };
+
+ button@400 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <400000>;
+ };
+};
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
};
&extbus {
- ranges = <0 0x00000000 0x0f000000 0x01000000
- 1 0x00000000 0x00000000 0x08000000>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>;
};
&support_card {
- ranges = <0x00000000 1 0x03f00000 0x00100000>;
+ ranges = <0x00000000 1 0x01f00000 0x00100000>;
};
ðsc {
+++ /dev/null
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-CONFIG_KERNEL_LZMA=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7778=y
-CONFIG_MACH_BOCKW=y
-CONFIG_MEMORY_START=0x60000000
-CONFIG_MEMORY_SIZE=0x10000000
-CONFIG_SHMOBILE_TIMER_HZ=1024
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_EM_TIMER_STI is not set
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_458693=y
-CONFIG_ARM_ERRATA_460075=y
-CONFIG_ARM_ERRATA_743622=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-CONFIG_SMSC911X=y
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=6
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_I2C=y
-CONFIG_I2C_RCAR=y
-CONFIG_GPIO_RCAR=y
-CONFIG_REGULATOR=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_VIDEO_RCAR_VIN=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_VIDEO_ML86V7667=y
-CONFIG_SPI=y
-CONFIG_SPI_SH_HSPI=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_RCAR=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_RCAR_PHY=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_SH_MMCIF=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RX8581=y
-CONFIG_DMADEVICES=y
-CONFIG_RCAR_HPB_DMAE=y
-CONFIG_UIO=y
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_SWAP=y
-CONFIG_NFS_V4_1=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-# CONFIG_ARM_UNWIND is not set
-CONFIG_AVERAGE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
+CONFIG_CMA=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_SUSPEND is not set
CONFIG_IP_PIMSM_V2=y
CONFIG_INET_AH=y
CONFIG_INET_IPCOMP=y
-CONFIG_IPV6=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_SCTP=y
CONFIG_VLAN_8021Q=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CMA=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DMA_CMA=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_NAND_DAVINCI=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_UBI=y
-CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_EEPROM_AT24=y
CONFIG_SCSI=y
CONFIG_NETDEVICES=y
CONFIG_TI_KEYSTONE_NETCP=y
CONFIG_TI_KEYSTONE_NETCP_ETHSS=y
-CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SPI=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_SPIDEV=y
-# CONFIG_HWMON is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DAVINCI=y
+CONFIG_GPIO_SYSCON=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_KEYSTONE=y
+# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_CORE=y
CONFIG_DAVINCI_WATCHDOG=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_DEBUG=y
-CONFIG_USB_DWC3_VERBOSE=y
CONFIG_KEYSTONE_USB_PHY=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_SOC_TI=y
CONFIG_KEYSTONE_NAVIGATOR_DMA=y
CONFIG_MEMORY=y
CONFIG_TI_AEMIF=y
+CONFIG_KEYSTONE_IRQ=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS4_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_SHIRQ=y
CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_SHIRQ=y
CONFIG_DEBUG_USER=y
CONFIG_CRYPTO_USER=y
-CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_DAVINCI=y
-CONFIG_LEDS_CLASS=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_KEYSTONE_IRQ=y
-CONFIG_GPIO_SYSCON=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_SPI_NXP_SPIFI=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SRAM=y
CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
+CONFIG_I2C_LPC2K=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
+CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_74XX_MMIO=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LM75=y
CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_MFD_SYSCON=y
+CONFIG_LPC18XX_WATCHDOG=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_IDMAC=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_LPC24XX=y
CONFIG_DMADEVICES=y
CONFIG_AMBA_PL08X=y
+CONFIG_LPC18XX_DMAMUX=y
+CONFIG_MEMORY=y
+CONFIG_ARM_PL172_MPMC=y
+CONFIG_PWM=y
+CONFIG_PWM_LPC18XX_SCT=y
+CONFIG_PHY_LPC18XX_USB_OTG=y
CONFIG_EXT2_FS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
+CONFIG_JFFS2_FS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_INFO is not set
-# CONFIG_FTRACE is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_CRC_ITU_T=y
CONFIG_SOC_SAMA5D4=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_CYGNUS=y
+CONFIG_ARCH_BCM_NSP=y
CONFIG_ARCH_BCM_21664=y
CONFIG_ARCH_BCM_281XX=y
CONFIG_ARCH_BCM_5301X=y
CONFIG_ARCH_R8A7793=y
CONFIG_ARCH_R8A7794=y
CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_MARZEN=y
CONFIG_ARCH_SUNXI=y
CONFIG_ARCH_SIRF=y
CONFIG_ARCH_TEGRA=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_MICREL_PHY=y
+CONFIG_FIXED_PHY=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_SMSC75XX=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_RIIC=y
+CONFIG_I2C_RK3X=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIRF=y
CONFIG_SPI_OMAP24XX=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
+CONFIG_SPI_ROCKCHIP=m
CONFIG_SPI_RSPI=y
CONFIG_SPI_S3C64XX=m
CONFIG_SPI_SH_MSIOF=m
CONFIG_SPI_SPIDEV=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_APQ8064=y
CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
+CONFIG_ROCKCHIP_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_ARMADA_THERMAL=y
CONFIG_DAVINCI_WATCHDOG=m
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=y
+CONFIG_MFD_RK808=y
+CONFIG_MFD_PM8921_CORE=y
+CONFIG_MFD_QCOM_RPM=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_PALMAS=y
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_REGULATOR_AB8500=y
+CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_DA9210=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_RK808=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MFD_SYSCON=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PWM=m
+CONFIG_REGULATOR_QCOM_RPM=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_TPS51632=y
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_DW_HDMI=m
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_TEGRA=y
CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MSM=m
CONFIG_USB_EHCI_EXYNOS=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_EHCI_HCD_STI=y
CONFIG_OMAP_USB3=y
CONFIG_USB_GPIO_VBUS=y
CONFIG_USB_ISP1301=y
+CONFIG_USB_MSM_OTG=m
CONFIG_USB_MXS_PHY=y
CONFIG_USB_RCAR_PHY=m
CONFIG_USB_GADGET=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_MAX77802=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_PALMAS=y
CONFIG_IMX_DMA=y
CONFIG_MXS_DMA=y
CONFIG_DMA_OMAP=y
+CONFIG_QCOM_BAM_DMA=y
CONFIG_XILINX_VDMA=y
CONFIG_DMA_SUN6I=y
CONFIG_STAGING=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
+CONFIG_ROCKCHIP_IOMMU=y
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_PM_DEVFREQ=y
CONFIG_PWM_ATMEL=m
CONFIG_PWM_ATMEL_TCB=m
CONFIG_PWM_RENESAS_TPU=y
+CONFIG_PWM_ROCKCHIP=m
CONFIG_PWM_SAMSUNG=m
CONFIG_PWM_SUN4I=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_STI=m
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
+CONFIG_PHY_ROCKCHIP_USB=m
+CONFIG_PHY_QCOM_APQ8064_SATA=m
CONFIG_PHY_MIPHY28LP=y
CONFIG_PHY_MIPHY365X=y
CONFIG_PHY_RCAR_GEN2=m
CONFIG_ARCH_R8A7793=y
CONFIG_ARCH_R8A7794=y
CONFIG_ARCH_SH73A0=y
-CONFIG_MACH_MARZEN=y
CONFIG_CPU_BPREDICT_DISABLE=y
CONFIG_PL310_ERRATA_588369=y
CONFIG_ARM_ERRATA_754322=y
*
*/
-#if defined(CONFIG_AT91_DEBUG_LL_DBGU0)
-#define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */
-#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
-#define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */
-#elif defined(CONFIG_AT91_DEBUG_LL_DBGU2)
-/* On sama5d4, use USART3 as low level serial console */
-#define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
-#else
-/* On sama5d2, use UART1 as low level serial console */
-#define AT91_DBGU 0xf8020000
-#endif
-
#ifdef CONFIG_MMU
#define AT91_IO_P2V(x) ((x) - 0x01000000)
#else
#define AT91_IO_P2V(x) (x)
#endif
+#define CONFIG_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
+
#define AT91_DBGU_SR (0x14) /* Status Register */
#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */
#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
.macro addruart, rp, rv, tmp
- ldr \rp, =AT91_DBGU @ System peripherals (phys address)
- ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address)
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address)
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address)
.endm
.macro senduart,rd,rx
BCM11300, BCM11320, BCM11350, BCM11360,
BCM58300, BCM58302, BCM58303, BCM58305.
+config ARCH_BCM_NSP
+ bool "Broadcom Northstar Plus SoC Support" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
+ help
+ Support for Broadcom Northstar Plus SoC.
+ Broadcom Northstar Plus family of SoCs are used for switching control
+ and management applications as well as residential router/gateway
+ applications. The SoC features dual core Cortex A9 ARM CPUs,
+ integrating several peripheral interfaces including multiple Gigabit
+ Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and
+ NAND flash, SATA and several other IO controllers.
+
config ARCH_BCM_5301X
bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
select ARCH_BCM_IPROC
select BCM7120_L2_IRQ
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select SOC_BRCMSTB
help
Say Y if you intend to run the kernel on a Broadcom ARM-based STB
chipset.
#
-# Copyright (C) 2012-2014 Broadcom Corporation
+# Copyright (C) 2012-2015 Broadcom Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# Cygnus
obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
+# Northstar Plus
+obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
+
# BCM281XX
obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
--- /dev/null
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const bcm_nsp_dt_compat[] __initconst = {
+ "brcm,nsp",
+ NULL,
+};
+
+DT_MACHINE_START(NSP_DT, "Broadcom Northstar Plus SoC")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .dt_compat = bcm_nsp_dt_compat,
+MACHINE_END
*/
#include <linux/init.h>
+#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/soc/brcmstb/brcmstb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+static void __init brcmstb_init_irq(void)
+{
+ irqchip_init();
+ brcmstb_biuctrl_init();
+}
+
static const char *const brcmstb_match[] __initconst = {
"brcm,bcm7445",
"brcm,brcmstb",
DT_MACHINE_START(BRCMSTB, "Broadcom STB (Flattened Device Tree)")
.dt_compat = brcmstb_match,
+ .init_irq = brcmstb_init_irq,
MACHINE_END
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
+static void __init berlin_init_late(void)
+{
+ platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+}
+
static const char * const berlin_dt_compat[] = {
"marvell,berlin",
NULL,
DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
.dt_compat = berlin_dt_compat,
+ .init_late = berlin_init_late,
/*
* with DT probing for L2CCs, berlin_init_machine can be removed.
* Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
#include <linux/of_address.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#define CPU_RESET 0x00
+/*
+ * There are two reset registers, one with self-clearing (SC)
+ * reset and one with non-self-clearing reset (NON_SC).
+ */
+#define CPU_RESET_SC 0x00
+#define CPU_RESET_NON_SC 0x20
#define RESET_VECT 0x00
#define SW_RESET_ADDR 0x94
{
u32 val;
- val = readl(cpu_ctrl + CPU_RESET);
+ val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+ val &= ~BIT(cpu_logical_map(cpu));
+ writel(val, cpu_ctrl + CPU_RESET_NON_SC);
val |= BIT(cpu_logical_map(cpu));
- writel(val, cpu_ctrl + CPU_RESET);
+ writel(val, cpu_ctrl + CPU_RESET_NON_SC);
}
static int berlin_boot_secondary(unsigned int cpu, struct task_struct *idle)
iounmap(scu_base);
}
+#ifdef CONFIG_HOTPLUG_CPU
+static void berlin_cpu_die(unsigned int cpu)
+{
+ v7_exit_coherency_flush(louis);
+ while (1)
+ cpu_do_idle();
+}
+
+static int berlin_cpu_kill(unsigned int cpu)
+{
+ u32 val;
+
+ val = readl(cpu_ctrl + CPU_RESET_NON_SC);
+ val &= ~BIT(cpu_logical_map(cpu));
+ writel(val, cpu_ctrl + CPU_RESET_NON_SC);
+
+ return 1;
+}
+#endif
+
static struct smp_operations berlin_smp_ops __initdata = {
.smp_prepare_cpus = berlin_smp_prepare_cpus,
.smp_boot_secondary = berlin_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = berlin_cpu_die,
+ .cpu_kill = berlin_cpu_kill,
+#endif
};
CPU_METHOD_OF_DECLARE(berlin_smp, "marvell,berlin-smp", &berlin_smp_ops);
/*
* The CNS PCI bridge doesn't fit into the PCI hierarchy, though
- * we still want to access it. For this to work, we must place
- * the first device on the same bus as the CNS PCI bridge.
+ * we still want to access it.
+ * We place the host bridge on bus 0, and the directly connected
+ * device on bus 1, slot 0.
*/
if (busno == 0) { /* internal PCIe bus, host bridge device */
if (devfn == 0) /* device# and function# are ignored by hw */
}
}
+static void cns3xxx_write_config(struct cns3xxx_pcie *cnspci,
+ int where, int size, u32 val)
+{
+ void __iomem *base = cnspci->host_regs + (where & 0xffc);
+ u32 v;
+ u32 mask = (0x1ull << (size * 8)) - 1;
+ int shift = (where % 4) * 8;
+
+ v = readl_relaxed(base + (where & 0xffc));
+
+ v &= ~(mask << shift);
+ v |= (val & mask) << shift;
+
+ writel_relaxed(v, base + (where & 0xffc));
+ readl_relaxed(base + (where & 0xffc));
+}
+
static void __init cns3xxx_pcie_hw_init(struct cns3xxx_pcie *cnspci)
{
- int port = cnspci->port;
- struct pci_sys_data sd = {
- .private_data = cnspci,
- };
- struct pci_bus bus = {
- .number = 0,
- .ops = &cns3xxx_pcie_ops,
- .sysdata = &sd,
- };
u16 mem_base = cnspci->res_mem.start >> 16;
u16 mem_limit = cnspci->res_mem.end >> 16;
u16 io_base = cnspci->res_io.start >> 16;
u16 io_limit = cnspci->res_io.end >> 16;
- u32 devfn = 0;
- u8 tmp8;
- u16 pos;
- u16 dc;
-
- pci_bus_write_config_byte(&bus, devfn, PCI_PRIMARY_BUS, 0);
- pci_bus_write_config_byte(&bus, devfn, PCI_SECONDARY_BUS, 1);
- pci_bus_write_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, 1);
- pci_bus_read_config_byte(&bus, devfn, PCI_PRIMARY_BUS, &tmp8);
- pci_bus_read_config_byte(&bus, devfn, PCI_SECONDARY_BUS, &tmp8);
- pci_bus_read_config_byte(&bus, devfn, PCI_SUBORDINATE_BUS, &tmp8);
-
- pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_BASE, mem_base);
- pci_bus_write_config_word(&bus, devfn, PCI_MEMORY_LIMIT, mem_limit);
- pci_bus_write_config_word(&bus, devfn, PCI_IO_BASE_UPPER16, io_base);
- pci_bus_write_config_word(&bus, devfn, PCI_IO_LIMIT_UPPER16, io_limit);
+ cns3xxx_write_config(cnspci, PCI_PRIMARY_BUS, 1, 0);
+ cns3xxx_write_config(cnspci, PCI_SECONDARY_BUS, 1, 1);
+ cns3xxx_write_config(cnspci, PCI_SUBORDINATE_BUS, 1, 1);
+ cns3xxx_write_config(cnspci, PCI_MEMORY_BASE, 2, mem_base);
+ cns3xxx_write_config(cnspci, PCI_MEMORY_LIMIT, 2, mem_limit);
+ cns3xxx_write_config(cnspci, PCI_IO_BASE_UPPER16, 2, io_base);
+ cns3xxx_write_config(cnspci, PCI_IO_LIMIT_UPPER16, 2, io_limit);
if (!cnspci->linked)
return;
/* Set Device Max_Read_Request_Size to 128 byte */
- bus.number = 1; /* directly connected PCIe device */
- devfn = PCI_DEVFN(0, 0);
- pos = pci_bus_find_capability(&bus, devfn, PCI_CAP_ID_EXP);
- pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
- if (dc & PCI_EXP_DEVCTL_READRQ) {
- dc &= ~PCI_EXP_DEVCTL_READRQ;
- pci_bus_write_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, dc);
- pci_bus_read_config_word(&bus, devfn, pos + PCI_EXP_DEVCTL, &dc);
- if (dc & PCI_EXP_DEVCTL_READRQ)
- pr_warn("PCIe: Unable to set device Max_Read_Request_Size\n");
- else
- pr_info("PCIe: Max_Read_Request_Size set to 128 bytes\n");
- }
+ pcie_bus_config = PCIE_BUS_PEER2PEER;
+
/* Disable PCIe0 Interrupt Mask INTA to INTD */
- __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(port));
+ __raw_writel(~0x3FFF, MISC_PCIE_INT_MASK(cnspci->port));
}
static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
if (status < 0)
return status;
- dev_dbg(&dm6446evm_msp->dev,
- "PINS: %02x %02x %02x %02x\n",
- buf[0], buf[1], buf[2], buf[3]);
+ dev_dbg(&dm6446evm_msp->dev, "PINS: %4ph\n", buf);
return (buf[3] << 8) | buf[2];
}
{
unsigned long flags;
- if (clk == NULL || IS_ERR(clk))
+ if (!clk)
+ return 0;
+ else if (IS_ERR(clk))
return -EINVAL;
spin_lock_irqsave(&clockfw_lock, flags);
unsigned long clk_get_rate(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
- return -EINVAL;
+ return 0;
return clk->rate;
}
unsigned long flags;
int ret = -EINVAL;
- if (clk == NULL || IS_ERR(clk))
- return ret;
+ if (!clk)
+ return 0;
+ else if (IS_ERR(clk))
+ return -EINVAL;
if (clk->set_rate)
ret = clk->set_rate(clk, rate);
{
unsigned long flags;
- if (clk == NULL || IS_ERR(clk))
+ if (!clk)
+ return 0;
+ else if (IS_ERR(clk))
return -EINVAL;
/* Cannot change parent on enabled clock */
config ARCH_DIGICOLOR
bool "Conexant Digicolor SoC Support"
depends on ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select DIGICOLOR_TIMER
select GENERIC_IRQ_CHIP
select MFD_SYSCON
+ select PINCTRL
+ select PINCTRL_DIGICOLOR
}
static const char *const keystone_match[] __initconst = {
+ "ti,k2hk",
+ "ti,k2e",
+ "ti,k2l",
"ti,keystone",
NULL,
};
default ARCH_MESON
select MESON6_TIMER
+config MACH_MESON8B
+ bool "Amlogic Meson8b SoCs support"
+ default ARCH_MESON
+ select MESON6_TIMER
+
endif
static const char * const meson_common_board_compat[] = {
"amlogic,meson6",
"amlogic,meson8",
+ "amlogic,meson8b",
NULL,
};
unsigned long coherency_phys_base;
void __iomem *coherency_base;
static void __iomem *coherency_cpu_base;
+static void __iomem *cpu_config_base;
/* Coherency fabric registers */
#define IO_SYNC_BARRIER_CTL_OFFSET 0x0
int ll_enable_coherency(void);
void ll_add_cpu_to_smp_group(void);
+#define CPU_CONFIG_SHARED_L2 BIT(16)
+
+/*
+ * Disable the "Shared L2 Present" bit in CPU Configuration register
+ * on Armada XP.
+ *
+ * The "Shared L2 Present" bit affects the "level of coherence" value
+ * in the clidr CP15 register. Cache operation functions such as
+ * "flush all" and "invalidate all" operate on all the cache levels
+ * that included in the defined level of coherence. When HW I/O
+ * coherency is used, this bit causes unnecessary flushes of the L2
+ * cache.
+ */
+static void armada_xp_clear_shared_l2(void)
+{
+ u32 reg;
+
+ if (!cpu_config_base)
+ return;
+
+ reg = readl(cpu_config_base);
+ reg &= ~CPU_CONFIG_SHARED_L2;
+ writel(reg, cpu_config_base);
+}
+
static int mvebu_hwcc_notifier(struct notifier_block *nb,
unsigned long event, void *__dev)
{
.notifier_call = mvebu_hwcc_notifier,
};
+static int armada_xp_clear_shared_l2_notifier_func(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+ armada_xp_clear_shared_l2();
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block armada_xp_clear_shared_l2_notifier = {
+ .notifier_call = armada_xp_clear_shared_l2_notifier_func,
+ .priority = 100,
+};
+
static void __init armada_370_coherency_init(struct device_node *np)
{
struct resource res;
+ struct device_node *cpu_config_np;
of_address_to_resource(np, 0, &res);
coherency_phys_base = res.start;
sync_cache_w(&coherency_phys_base);
coherency_base = of_iomap(np, 0);
coherency_cpu_base = of_iomap(np, 1);
+
+ cpu_config_np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-xp-cpu-config");
+ if (!cpu_config_np)
+ goto exit;
+
+ cpu_config_base = of_iomap(cpu_config_np, 0);
+ if (!cpu_config_base) {
+ of_node_put(cpu_config_np);
+ goto exit;
+ }
+
+ of_node_put(cpu_config_np);
+
+ register_cpu_notifier(&armada_xp_clear_shared_l2_notifier);
+
+exit:
set_cpu_coherent();
}
pr_warn("Coherency fabric is not initialized\n");
return 1;
}
+
+ armada_xp_clear_shared_l2();
ll_add_cpu_to_smp_group();
return ll_enable_coherency();
}
/* Test the CR_C bit and set it if it was cleared */
asm volatile(
"mrc p15, 0, r0, c1, c0, 0 \n\t"
- "tst r0, #(1 << 2) \n\t"
+ "tst r0, %0 \n\t"
"orreq r0, r0, #(1 << 2) \n\t"
"mcreq p15, 0, r0, c1, c0, 0 \n\t"
"isb "
- : : : "r0");
+ : : "Ir" (CR_C) : "r0");
pr_debug("Failed to suspend the system\n");
Support for TI OMAP 850 F-Sample board. Say Y here if you have such
a board.
-config MACH_VOICEBLUE
- bool "Voiceblue"
- depends on ARCH_OMAP1 && ARCH_OMAP15XX
- help
- Support for Voiceblue GSM/VoIP gateway. Say Y here if you have
- such a board.
-
config MACH_OMAP_PALMTE
bool "Palm Tungsten E"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
obj-$(CONFIG_MACH_OMAP_OSK) += board-osk.o
obj-$(CONFIG_MACH_OMAP_H3) += board-h3.o board-h3-mmc.o \
board-nand.o
-obj-$(CONFIG_MACH_VOICEBLUE) += board-voiceblue.o
obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o
obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o
obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap1/board-voiceblue.c
- *
- * Modified from board-generic.c
- *
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mtd/physmap.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/smc91x.h>
-#include <linux/export.h>
-#include <linux/reboot.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-voiceblue.h>
-#include <mach/flash.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-
-#include <mach/hardware.h>
-#include <mach/usb.h>
-
-#include "common.h"
-
-static struct plat_serial8250_port voiceblue_ports[] = {
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- {
- .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000),
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 1,
- .uartclk = 3686400,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM1,
-};
-
-static int __init ext_uart_init(void)
-{
- if (!machine_is_voiceblue())
- return -ENODEV;
-
- voiceblue_ports[0].irq = gpio_to_irq(12);
- voiceblue_ports[1].irq = gpio_to_irq(13);
- voiceblue_ports[2].irq = gpio_to_irq(14);
- voiceblue_ports[3].irq = gpio_to_irq(15);
- serial_device.dev.platform_data = voiceblue_ports;
- return platform_device_register(&serial_device);
-}
-arch_initcall(ext_uart_init);
-
-static struct physmap_flash_data voiceblue_flash_data = {
- .width = 2,
- .set_vpp = omap1_set_vpp,
-};
-
-static struct resource voiceblue_flash_resource = {
- .start = OMAP_CS0_PHYS,
- .end = OMAP_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device voiceblue_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &voiceblue_flash_data,
- },
- .num_resources = 1,
- .resource = &voiceblue_flash_resource,
-};
-
-static struct smc91x_platdata voiceblue_smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
- .leda = RPC_LED_100_10,
- .ledb = RPC_LED_TX_RX,
-};
-
-static struct resource voiceblue_smc91x_resources[] = {
- [0] = {
- .start = OMAP_CS2_PHYS + 0x300,
- .end = OMAP_CS2_PHYS + 0x300 + 16,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device voiceblue_smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .dev = {
- .platform_data = &voiceblue_smc91x_info,
- },
- .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources),
- .resource = voiceblue_smc91x_resources,
-};
-
-static struct platform_device *voiceblue_devices[] __initdata = {
- &voiceblue_flash_device,
- &voiceblue_smc91x_device,
-};
-
-static struct omap_usb_config voiceblue_usb_config __initdata = {
- .hmc_mode = 3,
- .register_host = 1,
- .register_dev = 1,
- .pins[0] = 2,
- .pins[1] = 6,
- .pins[2] = 6,
-};
-
-#define MACHINE_PANICED 1
-#define MACHINE_REBOOTING 2
-#define MACHINE_REBOOT 4
-static unsigned long machine_state;
-
-static int panic_event(struct notifier_block *this, unsigned long event,
- void *ptr)
-{
- if (test_and_set_bit(MACHINE_PANICED, &machine_state))
- return NOTIFY_DONE;
-
- /* Flash power LED */
- omap_writeb(0x78, OMAP_LPG1_LCR);
- omap_writeb(0x01, OMAP_LPG1_PMR); /* Enable clock */
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block panic_block = {
- .notifier_call = panic_event,
-};
-
-static int __init voiceblue_setup(void)
-{
- if (!machine_is_voiceblue())
- return -ENODEV;
-
- /* Setup panic notifier */
- atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
-
- return 0;
-}
-postcore_initcall(voiceblue_setup);
-
-static int wdt_gpio_state;
-
-void voiceblue_wdt_enable(void)
-{
- gpio_direction_output(0, 0);
- gpio_set_value(0, 1);
- gpio_set_value(0, 0);
- wdt_gpio_state = 0;
-}
-
-void voiceblue_wdt_disable(void)
-{
- gpio_set_value(0, 0);
- gpio_set_value(0, 1);
- gpio_set_value(0, 0);
- gpio_direction_input(0);
-}
-
-void voiceblue_wdt_ping(void)
-{
- if (test_bit(MACHINE_REBOOT, &machine_state))
- return;
-
- wdt_gpio_state = !wdt_gpio_state;
- gpio_set_value(0, wdt_gpio_state);
-}
-
-static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
-{
- /*
- * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
- * "Global Software Reset Affects Traffic Controller Frequency".
- */
- if (cpu_is_omap5912()) {
- omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
- omap_writew(0x8, ARM_RSTCT1);
- }
-
- set_bit(MACHINE_REBOOT, &machine_state);
- voiceblue_wdt_enable();
- while (1) ;
-}
-
-EXPORT_SYMBOL(voiceblue_wdt_enable);
-EXPORT_SYMBOL(voiceblue_wdt_disable);
-EXPORT_SYMBOL(voiceblue_wdt_ping);
-
-static void __init voiceblue_init(void)
-{
- /* mux pins for uarts */
- omap_cfg_reg(UART1_TX);
- omap_cfg_reg(UART1_RTS);
- omap_cfg_reg(UART2_TX);
- omap_cfg_reg(UART2_RTS);
- omap_cfg_reg(UART3_TX);
- omap_cfg_reg(UART3_RX);
-
- /* Watchdog */
- gpio_request(0, "Watchdog");
- /* smc91x reset */
- gpio_request(7, "SMC91x reset");
- gpio_direction_output(7, 1);
- udelay(2); /* wait at least 100ns */
- gpio_set_value(7, 0);
- mdelay(50); /* 50ms until PHY ready */
- /* smc91x interrupt pin */
- gpio_request(8, "SMC91x irq");
- /* 16C554 reset*/
- gpio_request(6, "16C554 reset");
- gpio_direction_output(6, 0);
- /* 16C554 interrupt pins */
- gpio_request(12, "16C554 irq");
- gpio_request(13, "16C554 irq");
- gpio_request(14, "16C554 irq");
- gpio_request(15, "16C554 irq");
- irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
-
- voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
- voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
- platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
- omap_serial_init();
- omap1_usb_init(&voiceblue_usb_config);
- omap_register_i2c_bus(1, 100, NULL, 0);
-
- /* There is a good chance board is going up, so enable power LED
- * (it is connected through invertor) */
- omap_writeb(0x00, OMAP_LPG1_LCR);
- omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */
-}
-
-MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
- /* Maintainer: Ladislav Michl <michl@2n.cz> */
- .atag_offset = 0x100,
- .map_io = omap15xx_map_io,
- .init_early = omap1_init_early,
- .init_irq = omap1_init_irq,
- .handle_irq = omap1_handle_irq,
- .init_machine = voiceblue_init,
- .init_late = omap1_init_late,
- .init_time = omap1_timer_init,
- .restart = voiceblue_restart,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * Hardware definitions for OMAP5910 based VoiceBlue board.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_VOICEBLUE_H
-#define __ASM_ARCH_VOICEBLUE_H
-
-extern void voiceblue_wdt_enable(void);
-extern void voiceblue_wdt_disable(void);
-extern void voiceblue_wdt_ping(void);
-
-#endif /* __ASM_ARCH_VOICEBLUE_H */
-
# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
-obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
AFLAGS_sram242x.o :=-Wa,-march=armv6
AFLAGS_sram243x.o :=-Wa,-march=armv6
-AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
# Restart code (OMAP4/5 currently in omap4-common.c)
obj-$(CONFIG_SOC_OMAP2420) += omap2-restart.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_virt_prcm_set.o
obj-$(CONFIG_ARCH_OMAP2) += clkt2xxx_dpll.o
obj-$(CONFIG_ARCH_OMAP3) += $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += clkt34xx_dpll3m2.o
obj-$(CONFIG_ARCH_OMAP4) += $(clock-common)
obj-$(CONFIG_SOC_AM33XX) += $(clock-common)
obj-$(CONFIG_SOC_OMAP5) += $(clock-common)
+++ /dev/null
-/*
- * OMAP34xx M2 divider clock code
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2010 Nokia Corporation
- *
- * Paul Walmsley
- * Jouni Högander
- *
- * Parts of this code are based on code written by
- * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include "clock.h"
-#include "clock3xxx.h"
-#include "sdrc.h"
-#include "sram.h"
-
-#define CYCLES_PER_MHZ 1000000
-
-struct clk *sdrc_ick_p, *arm_fck_p;
-
-/*
- * CORE DPLL (DPLL3) M2 divider rate programming functions
- *
- * These call into SRAM code to do the actual CM writes, since the SDRAM
- * is clocked from DPLL3.
- */
-
-/**
- * omap3_core_dpll_m2_set_rate - set CORE DPLL M2 divider
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Program the DPLL M2 divider with the rounded target rate. Returns
- * -EINVAL upon error, or 0 upon success.
- */
-int omap3_core_dpll_m2_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- u32 new_div = 0;
- u32 unlock_dll = 0;
- u32 c;
- unsigned long validrate, sdrcrate, _mpurate;
- struct omap_sdrc_params *sdrc_cs0;
- struct omap_sdrc_params *sdrc_cs1;
- int ret;
- unsigned long clkrate;
-
- if (!clk || !rate)
- return -EINVAL;
-
- new_div = DIV_ROUND_UP(parent_rate, rate);
- validrate = parent_rate / new_div;
-
- if (validrate != rate)
- return -EINVAL;
-
- sdrcrate = clk_get_rate(sdrc_ick_p);
- clkrate = clk_hw_get_rate(hw);
- if (rate > clkrate)
- sdrcrate <<= ((rate / clkrate) >> 1);
- else
- sdrcrate >>= ((clkrate / rate) >> 1);
-
- ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
- if (ret)
- return -EINVAL;
-
- if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
- pr_debug("clock: will unlock SDRC DLL\n");
- unlock_dll = 1;
- }
-
- /*
- * XXX This only needs to be done when the CPU frequency changes
- */
- _mpurate = clk_get_rate(arm_fck_p) / CYCLES_PER_MHZ;
- c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
- c += 1; /* for safety */
- c *= SDRC_MPURATE_LOOPS;
- c >>= SDRC_MPURATE_SCALE;
- if (c == 0)
- c = 1;
-
- pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n",
- clkrate, validrate);
- pr_debug("clock: SDRC CS0 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
- if (sdrc_cs1)
- pr_debug("clock: SDRC CS1 timing params used: RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
-
- if (sdrc_cs1)
- omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clkrate,
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
- sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
- sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
- else
- omap3_configure_core_dpll(
- new_div, unlock_dll, c, rate > clkrate,
- sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
- sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
- 0, 0, 0, 0);
- return 0;
-}
-
#include "common.h"
#include "mux.h"
#include "control.h"
-#include "devices.h"
#include "display.h"
#define L3_MODULES_MAX_LEN 12
}
omap_postcore_initcall(omap3_l3_init);
-#if defined(CONFIG_IOMMU_API)
-
-#include <linux/platform_data/iommu-omap.h>
-
-static struct resource omap3isp_resources[] = {
- {
- .start = OMAP3430_ISP_BASE,
- .end = OMAP3430_ISP_BASE + 0x12fc,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = OMAP3430_ISP_BASE2,
- .end = OMAP3430_ISP_BASE2 + 0x0600,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 24 + OMAP_INTC_START,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device omap3isp_device = {
- .name = "omap3isp",
- .id = -1,
- .num_resources = ARRAY_SIZE(omap3isp_resources),
- .resource = omap3isp_resources,
-};
-
-static struct omap_iommu_arch_data omap3_isp_iommu = {
- .name = "mmu_isp",
-};
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
- if (of_have_populated_dt())
- omap3_isp_iommu.name = "480bd400.mmu";
-
- omap3isp_device.dev.platform_data = pdata;
- omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
-
- return platform_device_register(&omap3isp_device);
-}
-
-#else /* !CONFIG_IOMMU_API */
-
-int omap3_init_camera(struct isp_platform_data *pdata)
-{
- return 0;
-}
-
-#endif
-
#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{
+++ /dev/null
-/*
- * arch/arm/mach-omap2/devices.h
- *
- * OMAP2 platform device setup/initialization
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP_DEVICES_H
-#define __ARCH_ARM_MACH_OMAP_DEVICES_H
-
-struct isp_platform_data;
-
-int omap3_init_camera(struct isp_platform_data *pdata);
-
-#endif
}
map++;
- };
+ }
return 0;
}
/* Only 81xx needs custom pwrdm_operations */
if (!cpu_is_ti81xx())
- pwrdm_register_platform_funcs(&omap3_pwrdm_operations);;
+ pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
rev = omap_rev();
#ifdef CONFIG_ARCH_OMAP3
-static u32 (*_omap3_sram_configure_core_dpll)(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-
-u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
-{
- BUG_ON(!_omap3_sram_configure_core_dpll);
- return _omap3_sram_configure_core_dpll(
- m2, unlock_dll, f, inc,
- sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
- sdrc_actim_ctrl_b_0, sdrc_mr_0,
- sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
- sdrc_actim_ctrl_b_1, sdrc_mr_1);
-}
-
void omap3_sram_restore_context(void)
{
omap_sram_reset();
- _omap3_sram_configure_core_dpll =
- omap_sram_push(omap3_sram_configure_core_dpll,
- omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
u32 mem_type);
extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-extern u32 omap3_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
extern void omap3_sram_restore_context(void);
/* Do not use these */
u32 mem_type);
extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-extern u32 omap3_sram_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
#ifdef CONFIG_PM
extern void omap_push_sram_idle(void);
#else
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap3/sram.S
- *
- * Omap3 specific functions that need to be run in internal SRAM
- *
- * Copyright (C) 2004, 2007, 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
- *
- * Rajendra Nayak <rnayak@ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <linux/linkage.h>
-
-#include <asm/assembler.h>
-
-#include "soc.h"
-#include "iomap.h"
-#include "sdrc.h"
-#include "cm3xxx.h"
-
-/*
- * This file needs be built unconditionally as ARM to interoperate correctly
- * with non-Thumb-2-capable firmware.
- */
- .arm
-
- .text
-
-/* r1 parameters */
-#define SDRC_NO_UNLOCK_DLL 0x0
-#define SDRC_UNLOCK_DLL 0x1
-
-/* SDRC_DLLA_CTRL bit settings */
-#define FIXEDDELAY_SHIFT 24
-#define FIXEDDELAY_MASK (0xff << FIXEDDELAY_SHIFT)
-#define DLLIDLE_MASK 0x4
-
-/*
- * SDRC_DLLA_CTRL default values: TI hardware team indicates that
- * FIXEDDELAY should be initialized to 0xf. This apparently was
- * empirically determined during process testing, so no derivation
- * was provided.
- */
-#define FIXEDDELAY_DEFAULT (0x0f << FIXEDDELAY_SHIFT)
-
-/* SDRC_DLLA_STATUS bit settings */
-#define LOCKSTATUS_MASK 0x4
-
-/* SDRC_POWER bit settings */
-#define SRFRONIDLEREQ_MASK 0x40
-
-/* CM_IDLEST1_CORE bit settings */
-#define ST_SDRC_MASK 0x2
-
-/* CM_ICLKEN1_CORE bit settings */
-#define EN_SDRC_MASK 0x2
-
-/* CM_CLKSEL1_PLL bit settings */
-#define CORE_DPLL_CLKOUT_DIV_SHIFT 0x1b
-
-/*
- * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- *
- * Params passed in registers:
- * r0 = new M2 divider setting (only 1 and 2 supported right now)
- * r1 = unlock SDRC DLL? (1 = yes, 0 = no). Only unlock DLL for
- * SDRC rates < 83MHz
- * r2 = number of MPU cycles to wait for SDRC to stabilize after
- * reprogramming the SDRC when switching to a slower MPU speed
- * r3 = increasing SDRC rate? (1 = yes, 0 = no)
- *
- * Params passed via the stack. The needed params will be copied in SRAM
- * before use by the code in SRAM (SDRAM is not accessible during SDRC
- * reconfiguration):
- * new SDRC_RFR_CTRL_0 register contents
- * new SDRC_ACTIM_CTRL_A_0 register contents
- * new SDRC_ACTIM_CTRL_B_0 register contents
- * new SDRC_MR_0 register value
- * new SDRC_RFR_CTRL_1 register contents
- * new SDRC_ACTIM_CTRL_A_1 register contents
- * new SDRC_ACTIM_CTRL_B_1 register contents
- * new SDRC_MR_1 register value
- *
- * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
- * the SDRC CS1 registers
- *
- * NOTE: This code no longer attempts to program the SDRC AC timing and MR
- * registers. This is because the code currently cannot ensure that all
- * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
- * SDRAM when the registers are written. If the registers are changed while
- * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
- * may enter an unpredictable state. In the future, the intent is to
- * re-enable this code in cases where we can ensure that no initiators are
- * touching the SDRAM. Until that time, users who know that their use case
- * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
- * option.
- *
- * Richard Woodruff notes that any changes to this code must be carefully
- * audited and tested to ensure that they don't cause a TLB miss while
- * the SDRAM is inaccessible. Such a situation will crash the system
- * since it will cause the ARM MMU to attempt to walk the page tables.
- * These crashes may be intermittent.
- */
- .align 3
-ENTRY(omap3_sram_configure_core_dpll)
- stmfd sp!, {r1-r12, lr} @ store regs to stack
-
- @ pull the extra args off the stack
- @ and store them in SRAM
-
-/*
- * PC-relative stores are deprecated in ARMv7 and lead to undefined behaviour
- * in Thumb-2: use a r7 as a base instead.
- * Be careful not to clobber r7 when maintaing this file.
- */
- THUMB( adr r7, omap3_sram_configure_core_dpll )
- .macro strtext Rt:req, label:req
- ARM( str \Rt, \label )
- THUMB( str \Rt, [r7, \label - omap3_sram_configure_core_dpll] )
- .endm
-
- ldr r4, [sp, #52]
- strtext r4, omap_sdrc_rfr_ctrl_0_val
- ldr r4, [sp, #56]
- strtext r4, omap_sdrc_actim_ctrl_a_0_val
- ldr r4, [sp, #60]
- strtext r4, omap_sdrc_actim_ctrl_b_0_val
- ldr r4, [sp, #64]
- strtext r4, omap_sdrc_mr_0_val
- ldr r4, [sp, #68]
- strtext r4, omap_sdrc_rfr_ctrl_1_val
- cmp r4, #0 @ if SDRC_RFR_CTRL_1 is 0,
- beq skip_cs1_params @ do not use cs1 params
- ldr r4, [sp, #72]
- strtext r4, omap_sdrc_actim_ctrl_a_1_val
- ldr r4, [sp, #76]
- strtext r4, omap_sdrc_actim_ctrl_b_1_val
- ldr r4, [sp, #80]
- strtext r4, omap_sdrc_mr_1_val
-skip_cs1_params:
- mrc p15, 0, r8, c1, c0, 0 @ read ctrl register
- bic r10, r8, #0x800 @ clear Z-bit, disable branch prediction
- mcr p15, 0, r10, c1, c0, 0 @ write ctrl register
- dsb @ flush buffered writes to interconnect
- isb @ prevent speculative exec past here
- cmp r3, #1 @ if increasing SDRC clk rate,
- bleq configure_sdrc @ program the SDRC regs early (for RFR)
- cmp r1, #SDRC_UNLOCK_DLL @ set the intended DLL state
- bleq unlock_dll
- blne lock_dll
- bl sdram_in_selfrefresh @ put SDRAM in self refresh, idle SDRC
- bl configure_core_dpll @ change the DPLL3 M2 divider
- mov r12, r2
- bl wait_clk_stable @ wait for SDRC to stabilize
- bl enable_sdrc @ take SDRC out of idle
- cmp r1, #SDRC_UNLOCK_DLL @ wait for DLL status to change
- bleq wait_dll_unlock
- blne wait_dll_lock
- cmp r3, #1 @ if increasing SDRC clk rate,
- beq return_to_sdram @ return to SDRAM code, otherwise,
- bl configure_sdrc @ reprogram SDRC regs now
-return_to_sdram:
- mcr p15, 0, r8, c1, c0, 0 @ restore ctrl register
- isb @ prevent speculative exec past here
- mov r0, #0 @ return value
- ldmfd sp!, {r1-r12, pc} @ restore regs and return
-unlock_dll:
- ldr r11, omap3_sdrc_dlla_ctrl
- ldr r12, [r11]
- bic r12, r12, #FIXEDDELAY_MASK
- orr r12, r12, #FIXEDDELAY_DEFAULT
- orr r12, r12, #DLLIDLE_MASK
- str r12, [r11] @ (no OCP barrier needed)
- bx lr
-lock_dll:
- ldr r11, omap3_sdrc_dlla_ctrl
- ldr r12, [r11]
- bic r12, r12, #DLLIDLE_MASK
- str r12, [r11] @ (no OCP barrier needed)
- bx lr
-sdram_in_selfrefresh:
- ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
- ldr r12, [r11] @ read the contents of SDRC_POWER
- mov r9, r12 @ keep a copy of SDRC_POWER bits
- orr r12, r12, #SRFRONIDLEREQ_MASK @ enable self refresh on idle
- str r12, [r11] @ write back to SDRC_POWER register
- ldr r12, [r11] @ posted-write barrier for SDRC
-idle_sdrc:
- ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
- ldr r12, [r11]
- bic r12, r12, #EN_SDRC_MASK @ disable iclk bit for SDRC
- str r12, [r11]
-wait_sdrc_idle:
- ldr r11, omap3_cm_idlest1_core
- ldr r12, [r11]
- and r12, r12, #ST_SDRC_MASK @ check for SDRC idle
- cmp r12, #ST_SDRC_MASK
- bne wait_sdrc_idle
- bx lr
-configure_core_dpll:
- ldr r11, omap3_cm_clksel1_pll
- ldr r12, [r11]
- ldr r10, core_m2_mask_val @ modify m2 for core dpll
- and r12, r12, r10
- orr r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
- str r12, [r11]
- ldr r12, [r11] @ posted-write barrier for CM
- bx lr
-wait_clk_stable:
- subs r12, r12, #1
- bne wait_clk_stable
- bx lr
-enable_sdrc:
- ldr r11, omap3_cm_iclken1_core
- ldr r12, [r11]
- orr r12, r12, #EN_SDRC_MASK @ enable iclk bit for SDRC
- str r12, [r11]
-wait_sdrc_idle1:
- ldr r11, omap3_cm_idlest1_core
- ldr r12, [r11]
- and r12, r12, #ST_SDRC_MASK
- cmp r12, #0
- bne wait_sdrc_idle1
-restore_sdrc_power_val:
- ldr r11, omap3_sdrc_power
- str r9, [r11] @ restore SDRC_POWER, no barrier needed
- bx lr
-wait_dll_lock:
- ldr r11, omap3_sdrc_dlla_status
- ldr r12, [r11]
- and r12, r12, #LOCKSTATUS_MASK
- cmp r12, #LOCKSTATUS_MASK
- bne wait_dll_lock
- bx lr
-wait_dll_unlock:
- ldr r11, omap3_sdrc_dlla_status
- ldr r12, [r11]
- and r12, r12, #LOCKSTATUS_MASK
- cmp r12, #0x0
- bne wait_dll_unlock
- bx lr
-configure_sdrc:
- ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM
- ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM
- str r12, [r11] @ store
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
- ldr r12, omap_sdrc_actim_ctrl_a_0_val
- ldr r11, omap3_sdrc_actim_ctrl_a_0
- str r12, [r11]
- ldr r12, omap_sdrc_actim_ctrl_b_0_val
- ldr r11, omap3_sdrc_actim_ctrl_b_0
- str r12, [r11]
- ldr r12, omap_sdrc_mr_0_val
- ldr r11, omap3_sdrc_mr_0
- str r12, [r11]
-#endif
- ldr r12, omap_sdrc_rfr_ctrl_1_val
- cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0,
- beq skip_cs1_prog @ do not program cs1 params
- ldr r11, omap3_sdrc_rfr_ctrl_1
- str r12, [r11]
-#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
- ldr r12, omap_sdrc_actim_ctrl_a_1_val
- ldr r11, omap3_sdrc_actim_ctrl_a_1
- str r12, [r11]
- ldr r12, omap_sdrc_actim_ctrl_b_1_val
- ldr r11, omap3_sdrc_actim_ctrl_b_1
- str r12, [r11]
- ldr r12, omap_sdrc_mr_1_val
- ldr r11, omap3_sdrc_mr_1
- str r12, [r11]
-#endif
-skip_cs1_prog:
- ldr r12, [r11] @ posted-write barrier for SDRC
- bx lr
-
- .align
-omap3_sdrc_power:
- .word OMAP34XX_SDRC_REGADDR(SDRC_POWER)
-omap3_cm_clksel1_pll:
- .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1)
-omap3_cm_idlest1_core:
- .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
-omap3_cm_iclken1_core:
- .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-
-omap3_sdrc_rfr_ctrl_0:
- .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_rfr_ctrl_1:
- .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
-omap3_sdrc_actim_ctrl_a_0:
- .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrl_a_1:
- .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
-omap3_sdrc_actim_ctrl_b_0:
- .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
-omap3_sdrc_actim_ctrl_b_1:
- .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
-omap3_sdrc_mr_0:
- .word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
-omap3_sdrc_mr_1:
- .word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
-omap_sdrc_rfr_ctrl_0_val:
- .word 0xDEADBEEF
-omap_sdrc_rfr_ctrl_1_val:
- .word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_0_val:
- .word 0xDEADBEEF
-omap_sdrc_actim_ctrl_a_1_val:
- .word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_0_val:
- .word 0xDEADBEEF
-omap_sdrc_actim_ctrl_b_1_val:
- .word 0xDEADBEEF
-omap_sdrc_mr_0_val:
- .word 0xDEADBEEF
-omap_sdrc_mr_1_val:
- .word 0xDEADBEEF
-
-omap3_sdrc_dlla_status:
- .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
-omap3_sdrc_dlla_ctrl:
- .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
-core_m2_mask_val:
- .word 0x07FFFFFF
-ENDPROC(omap3_sram_configure_core_dpll)
-
-ENTRY(omap3_sram_configure_core_dpll_sz)
- .word . - omap3_sram_configure_core_dpll
-
}
}
-#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \
- OMAP3430_PRM_POLCTRL_CLKREQ_POL)
-#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL
-
/*
* Configure signal polarity for sys_clkreq and sys_off_mode pins
* as the default values are wrong and can cause the system to hang
comment "Renesas ARM SoCs System Configuration"
endif
-
-if ARCH_SHMOBILE_LEGACY
-
-comment "Renesas ARM SoCs System Type"
-
-config ARCH_R8A7778
- bool "R-Car M1A (R8A77781)"
- select ARCH_RCAR_GEN1
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
-
-config ARCH_R8A7779
- bool "R-Car H1 (R8A77790)"
- select ARCH_RCAR_GEN1
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
-
-comment "Renesas ARM SoCs Board Type"
-
-config MACH_BOCKW
- bool "BOCK-W platform"
- depends on ARCH_R8A7778
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SND_SOC_AK4554 if SND_SIMPLE_CARD
- select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C
- select USE_OF
-
-config MACH_BOCKW_REFERENCE
- bool "BOCK-W - Reference Device Tree Implementation"
- depends on ARCH_R8A7778
- select ARCH_REQUIRE_GPIOLIB
- select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select USE_OF
- ---help---
- Use reference implementation of BockW board support
- which makes use of device tree at the expense
- of not supporting a number of devices.
-
- This is intended to aid developers
-
-comment "Renesas ARM SoCs System Configuration"
-
-config CPU_HAS_INTEVT
- bool
- default y
-
-config SH_CLK_CPG
- bool
-
-source "drivers/sh/Kconfig"
-
-endif
-
-if ARCH_SHMOBILE
-
-menu "Timer and clock configuration"
-
-config SHMOBILE_TIMER_HZ
- int "Kernel HZ (jiffies per second)"
- range 32 1024
- default "128"
- help
- Allows the configuration of the timer frequency. It is customary
- to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
- case of low timer frequencies other values may be more suitable.
- Renesas ARM SoC systems using a 32768 Hz RCLK for clock events may
- want to select a HZ value such as 128 that can evenly divide RCLK.
- A HZ value that does not divide evenly may cause timer drift.
-
-endmenu
-
-endif
#
# Common objects
-obj-y := timer.o console.o
+obj-y := timer.o
# CPU objects
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
-# Clock objects
-ifndef CONFIG_COMMON_CLK
-obj-y += clock.o
-obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
-endif
-
# CPU reset vector handling objects
cpu-y := platsmp.o headsmp.o
obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
-# Board objects
-ifndef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
-obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
-endif
-
# Framework support
obj-$(CONFIG_SMP) += $(smp-y)
+++ /dev/null
-# per-board load address for uImage
-loadaddr-y :=
-loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
-loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-
-__ZRELADDR := $(sort $(loadaddr-y))
- zreladdr-y += $(__ZRELADDR)
-
-# Unsupported legacy stuff
-#
-#params_phys-y (Instead: Pass atags pointer in r2)
-#initrd_phys-y (Instead: Use compiled-in initramfs)
+++ /dev/null
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "r8a7778.h"
-
-/*
- * see board-bock.c for checking detail of dip-switch
- */
-
-#define FPGA 0x18200000
-#define IRQ0MR 0x30
-#define COMCTLR 0x101c
-
-#define PFC 0xfffc0000
-#define PUPR4 0x110
-static void __init bockw_init(void)
-{
- void __iomem *fpga;
- void __iomem *pfc;
-
-#ifndef CONFIG_COMMON_CLK
- r8a7778_clock_init();
-#endif
- r8a7778_init_irq_extpin_dt(1);
- r8a7778_add_dt_devices();
-
- fpga = ioremap_nocache(FPGA, SZ_1M);
- if (fpga) {
- /*
- * CAUTION
- *
- * IRQ0/1 is cascaded interrupt from FPGA.
- * it should be cared in the future
- * Now, it is assuming IRQ0 was used only from SMSC.
- */
- u16 val = ioread16(fpga + IRQ0MR);
- val &= ~(1 << 4); /* enable SMSC911x */
- iowrite16(val, fpga + IRQ0MR);
-
- iounmap(fpga);
- }
-
- pfc = ioremap_nocache(PFC, 0x200);
- if (pfc) {
- /*
- * FIXME
- *
- * SDHI CD/WP pin needs pull-up
- */
- iowrite32(ioread32(pfc + PUPR4) | (3 << 26), pfc + PUPR4);
- iounmap(pfc);
- }
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
- "renesas,bockw-reference",
- NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
- .init_early = shmobile_init_delay,
- .init_irq = r8a7778_init_irq_dt,
- .init_machine = bockw_init,
- .init_late = shmobile_init_late,
- .dt_compat = bockw_boards_compat_dt,
-MACHINE_END
+++ /dev/null
-/*
- * Bock-W board support
- *
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013-2014 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mtd/partitions.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/camera-rcar.h>
-#include <linux/platform_data/usb-rcar-phy.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/usb/renesas_usbhs.h>
-
-#include <media/soc_camera.h>
-#include <asm/mach/arch.h>
-#include <sound/rcar_snd.h>
-#include <sound/simple_card.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a7778.h"
-
-#define FPGA 0x18200000
-#define IRQ0MR 0x30
-#define COMCTLR 0x101c
-static void __iomem *fpga;
-
-/*
- * CN9(Upper side) SCIF/RCAN selection
- *
- * 1,4 3,6
- * SW40 SCIF RCAN
- * SW41 SCIF RCAN
- */
-
-/*
- * MMC (CN26) pin
- *
- * SW6 (D2) 3 pin
- * SW7 (D5) ON
- * SW8 (D3) 3 pin
- * SW10 (D4) 1 pin
- * SW12 (CLK) 1 pin
- * SW13 (D6) 3 pin
- * SW14 (CMD) ON
- * SW15 (D6) 1 pin
- * SW16 (D0) ON
- * SW17 (D1) ON
- * SW18 (D7) 3 pin
- * SW19 (MMC) 1 pin
- */
-
-/*
- * SSI settings
- *
- * SW45: 1-4 side (SSI5 out, ROUT/LOUT CN19 Mid)
- * SW46: 1101 (SSI6 Recorde)
- * SW47: 1110 (SSI5 Playback)
- * SW48: 11 (Recorde power)
- * SW49: 1 (SSI slave mode)
- * SW50: 1111 (SSI7, SSI8)
- * SW51: 1111 (SSI3, SSI4)
- * SW54: 1pin (ak4554 FPGA control)
- * SW55: 1 (CLKB is 24.5760MHz)
- * SW60: 1pin (ak4554 FPGA control)
- * SW61: 3pin (use X11 clock)
- * SW78: 3-6 (ak4642 connects I2C0)
- *
- * You can use sound as
- *
- * hw0: CN19: SSI56-AK4643
- * hw1: CN21: SSI3-AK4554(playback)
- * hw2: CN21: SSI4-AK4554(capture)
- * hw3: CN20: SSI7-AK4554(playback)
- * hw4: CN20: SSI8-AK4554(capture)
- *
- * this command is required when playback on hw0.
- *
- * # amixer set "LINEOUT Mixer DACL" on
- */
-
-/*
- * USB
- *
- * USB1 (CN29) can be Host/Function
- *
- * Host Func
- * SW98 1 2
- * SW99 1 3
- */
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
- REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
- REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
-};
-
-static struct smsc911x_platform_config smsc911x_data __initdata = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_32BIT,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct resource smsc911x_resources[] __initdata = {
- DEFINE_RES_MEM(0x18300000, 0x1000),
- DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
-};
-
-#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
-/*
- * When USB1 is Func
- */
-static int usbhsf_get_id(struct platform_device *pdev)
-{
- return USBHS_GADGET;
-}
-
-#define SUSPMODE 0x102
-static int usbhsf_power_ctrl(struct platform_device *pdev,
- void __iomem *base, int enable)
-{
- enable = !!enable;
-
- r8a7778_usb_phy_power(enable);
-
- iowrite16(enable << 14, base + SUSPMODE);
-
- return 0;
-}
-
-static struct resource usbhsf_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe60000, 0x110),
- DEFINE_RES_IRQ(gic_iid(0x4f)),
-};
-
-static struct renesas_usbhs_platform_info usbhs_info __initdata = {
- .platform_callback = {
- .get_id = usbhsf_get_id,
- .power_ctrl = usbhsf_power_ctrl,
- },
- .driver_param = {
- .buswait_bwait = 4,
- .d0_tx_id = HPBDMA_SLAVE_USBFUNC_TX,
- .d1_rx_id = HPBDMA_SLAVE_USBFUNC_RX,
- },
-};
-
-#define USB_PHY_SETTING {.port1_func = 1, .ovc_pin[1].active_high = 1,}
-#define USB1_DEVICE "renesas_usbhs"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE() \
- platform_device_register_resndata( \
- NULL, "renesas_usbhs", -1, \
- usbhsf_resources, \
- ARRAY_SIZE(usbhsf_resources), \
- &usbhs_info, sizeof(struct renesas_usbhs_platform_info))
-
-#else
-/*
- * When USB1 is Host
- */
-#define USB_PHY_SETTING { }
-#define USB1_DEVICE "ehci-platform"
-#define ADD_USB_FUNC_DEVICE_IF_POSSIBLE()
-
-#endif
-
-/* USB */
-static struct resource usb_phy_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe70800, 0x100),
- DEFINE_RES_MEM(0xffe76000, 0x100),
-};
-
-static struct rcar_phy_platform_data usb_phy_platform_data __initdata =
- USB_PHY_SETTING;
-
-
-/* SDHI */
-static struct tmio_mmc_data sdhi0_info __initdata = {
- .chan_priv_tx = (void *)HPBDMA_SLAVE_SDHI0_TX,
- .chan_priv_rx = (void *)HPBDMA_SLAVE_SDHI0_RX,
- .capabilities = MMC_CAP_SD_HIGHSPEED,
- .ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
- .flags = TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] __initdata = {
- DEFINE_RES_MEM(0xFFE4C000, 0x100),
- DEFINE_RES_IRQ(gic_iid(0x77)),
-};
-
-/* Ether */
-static struct resource ether_resources[] __initdata = {
- DEFINE_RES_MEM(0xfde00000, 0x400),
- DEFINE_RES_IRQ(gic_iid(0x89)),
-};
-
-static struct sh_eth_plat_data ether_platform_data __initdata = {
- .phy = 0x01,
- .edmac_endian = EDMAC_LITTLE_ENDIAN,
- .phy_interface = PHY_INTERFACE_MODE_RMII,
- /*
- * Although the LINK signal is available on the board, it's connected to
- * the link/activity LED output of the PHY, thus the link disappears and
- * reappears after each packet. We'd be better off ignoring such signal
- * and getting the link state from the PHY indirectly.
- */
- .no_ether_link = 1,
-};
-
-static struct platform_device_info ether_info __initdata = {
- .name = "r8a777x-ether",
- .id = -1,
- .res = ether_resources,
- .num_res = ARRAY_SIZE(ether_resources),
- .data = ðer_platform_data,
- .size_data = sizeof(ether_platform_data),
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-/* I2C */
-static struct i2c_board_info i2c0_devices[] = {
- {
- I2C_BOARD_INFO("rx8581", 0x51),
- }, {
- I2C_BOARD_INFO("ak4643", 0x12),
- }
-};
-
-/* HSPI*/
-static struct mtd_partition m25p80_spi_flash_partitions[] = {
- {
- .name = "data(spi)",
- .size = 0x0100000,
- .offset = 0,
- },
-};
-
-static struct flash_platform_data spi_flash_data = {
- .name = "m25p80",
- .type = "s25fl008k",
- .parts = m25p80_spi_flash_partitions,
- .nr_parts = ARRAY_SIZE(m25p80_spi_flash_partitions),
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
- {
- .modalias = "m25p80",
- .max_speed_hz = 104000000,
- .chip_select = 0,
- .bus_num = 0,
- .mode = SPI_MODE_0,
- .platform_data = &spi_flash_data,
- },
-};
-
-/* MMC */
-static struct resource mmc_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe4e000, 0x100),
- DEFINE_RES_IRQ(gic_iid(0x5d)),
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
- .sup_pclk = 0,
- .caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_8_BIT_DATA |
- MMC_CAP_NEEDS_POLL,
-};
-
-/* In the default configuration both decoders reside on I2C bus 0 */
-#define BOCKW_CAMERA(idx) \
-static struct i2c_board_info camera##idx##_info = { \
- I2C_BOARD_INFO("ml86v7667", 0x41 + 2 * (idx)), \
-}; \
- \
-static struct soc_camera_link iclink##idx##_ml86v7667 __initdata = { \
- .bus_id = idx, \
- .i2c_adapter_id = 0, \
- .board_info = &camera##idx##_info, \
-}
-
-BOCKW_CAMERA(0);
-BOCKW_CAMERA(1);
-
-/* VIN */
-static struct rcar_vin_platform_data vin_platform_data __initdata = {
- .flags = RCAR_VIN_BT656,
-};
-
-#define R8A7778_VIN(idx) \
-static struct resource vin##idx##_resources[] __initdata = { \
- DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
- DEFINE_RES_IRQ(gic_iid(0x5a)), \
-}; \
- \
-static struct platform_device_info vin##idx##_info __initdata = { \
- .name = "r8a7778-vin", \
- .id = idx, \
- .res = vin##idx##_resources, \
- .num_res = ARRAY_SIZE(vin##idx##_resources), \
- .dma_mask = DMA_BIT_MASK(32), \
- .data = &vin_platform_data, \
- .size_data = sizeof(vin_platform_data), \
-}
-R8A7778_VIN(0);
-R8A7778_VIN(1);
-
-/* Sound */
-static struct resource rsnd_resources[] __initdata = {
- [RSND_GEN1_SRU] = DEFINE_RES_MEM(0xffd90000, 0x1000),
- [RSND_GEN1_SSI] = DEFINE_RES_MEM(0xffd91000, 0x1240),
- [RSND_GEN1_ADG] = DEFINE_RES_MEM(0xfffe0000, 0x24),
-};
-
-static struct rsnd_ssi_platform_info rsnd_ssi[] = {
- RSND_SSI_UNUSED, /* SSI 0 */
- RSND_SSI_UNUSED, /* SSI 1 */
- RSND_SSI_UNUSED, /* SSI 2 */
- RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0),
- RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE),
- RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0),
- RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0),
- RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0),
- RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE),
-};
-
-static struct rsnd_src_platform_info rsnd_src[9] = {
- RSND_SRC_UNUSED, /* SRU 0 */
- RSND_SRC_UNUSED, /* SRU 1 */
- RSND_SRC_UNUSED, /* SRU 2 */
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
- RSND_SRC(0, 0),
-};
-
-static struct rsnd_dai_platform_info rsnd_dai[] = {
- {
- .playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] },
- .capture = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] },
- }, {
- .playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] },
- }, {
- .capture = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] },
- }, {
- .playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] },
- }, {
- .capture = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] },
- },
-};
-
-enum {
- AK4554_34 = 0,
- AK4643_56,
- AK4554_78,
- SOUND_MAX,
-};
-
-static int rsnd_codec_power(int id, int enable)
-{
- static int sound_user[SOUND_MAX] = {0, 0, 0};
- int *usr = NULL;
- u32 bit;
-
- switch (id) {
- case 3:
- case 4:
- usr = sound_user + AK4554_34;
- bit = (1 << 10);
- break;
- case 5:
- case 6:
- usr = sound_user + AK4643_56;
- bit = (1 << 6);
- break;
- case 7:
- case 8:
- usr = sound_user + AK4554_78;
- bit = (1 << 7);
- break;
- }
-
- if (!usr)
- return -EIO;
-
- if (enable) {
- if (*usr == 0) {
- u32 val = ioread16(fpga + COMCTLR);
- val &= ~bit;
- iowrite16(val, fpga + COMCTLR);
- }
-
- (*usr)++;
- } else {
- if (*usr == 0)
- return 0;
-
- (*usr)--;
-
- if (*usr == 0) {
- u32 val = ioread16(fpga + COMCTLR);
- val |= bit;
- iowrite16(val, fpga + COMCTLR);
- }
- }
-
- return 0;
-}
-
-static int rsnd_start(int id)
-{
- return rsnd_codec_power(id, 1);
-}
-
-static int rsnd_stop(int id)
-{
- return rsnd_codec_power(id, 0);
-}
-
-static struct rcar_snd_info rsnd_info = {
- .flags = RSND_GEN1,
- .ssi_info = rsnd_ssi,
- .ssi_info_nr = ARRAY_SIZE(rsnd_ssi),
- .src_info = rsnd_src,
- .src_info_nr = ARRAY_SIZE(rsnd_src),
- .dai_info = rsnd_dai,
- .dai_info_nr = ARRAY_SIZE(rsnd_dai),
- .start = rsnd_start,
- .stop = rsnd_stop,
-};
-
-static struct asoc_simple_card_info rsnd_card_info[] = {
- /* SSI5, SSI6 */
- {
- .name = "AK4643",
- .card = "SSI56-AK4643",
- .codec = "ak4642-codec.0-0012",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
- .cpu_dai = {
- .name = "rsnd-dai.0",
- },
- .codec_dai = {
- .name = "ak4642-hifi",
- .sysclk = 11289600,
- },
- },
- /* SSI3 */
- {
- .name = "AK4554",
- .card = "SSI3-AK4554(playback)",
- .codec = "ak4554-adc-dac.0",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
- .cpu_dai = {
- .name = "rsnd-dai.1",
- },
- .codec_dai = {
- .name = "ak4554-hifi",
- },
- },
- /* SSI4 */
- {
- .name = "AK4554",
- .card = "SSI4-AK4554(capture)",
- .codec = "ak4554-adc-dac.0",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
- .cpu_dai = {
- .name = "rsnd-dai.2",
- },
- .codec_dai = {
- .name = "ak4554-hifi",
- },
- },
- /* SSI7 */
- {
- .name = "AK4554",
- .card = "SSI7-AK4554(playback)",
- .codec = "ak4554-adc-dac.1",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_RIGHT_J,
- .cpu_dai = {
- .name = "rsnd-dai.3",
- },
- .codec_dai = {
- .name = "ak4554-hifi",
- },
- },
- /* SSI8 */
- {
- .name = "AK4554",
- .card = "SSI8-AK4554(capture)",
- .codec = "ak4554-adc-dac.1",
- .platform = "rcar_sound",
- .daifmt = SND_SOC_DAIFMT_CBS_CFS | SND_SOC_DAIFMT_LEFT_J,
- .cpu_dai = {
- .name = "rsnd-dai.4",
- },
- .codec_dai = {
- .name = "ak4554-hifi",
- },
- }
-};
-
-static const struct pinctrl_map bockw_pinctrl_map[] = {
- /* AUDIO */
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "audio_clk_a", "audio_clk"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "audio_clk_b", "audio_clk"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi34_ctrl", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi3_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi4_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi5_ctrl", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi5_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi6_ctrl", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi6_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi78_ctrl", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi7_data", "ssi"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7778",
- "ssi8_data", "ssi"),
- /* Ether */
- PIN_MAP_MUX_GROUP_DEFAULT("r8a777x-ether", "pfc-r8a7778",
- "ether_rmii", "ether"),
- /* HSPI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7778",
- "hspi0_a", "hspi0"),
- /* MMC */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
- "mmc_data8", "mmc"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif", "pfc-r8a7778",
- "mmc_ctrl", "mmc"),
- /* SCIF0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
- "scif0_data_a", "scif0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
- "scif0_ctrl", "scif0"),
- /* USB */
- PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform", "pfc-r8a7778",
- "usb0", "usb0"),
- PIN_MAP_MUX_GROUP_DEFAULT(USB1_DEVICE, "pfc-r8a7778",
- "usb1", "usb1"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
- "sdhi0_wp", "sdhi0"),
- /* VIN0 */
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
- "vin0_clk", "vin0"),
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.0", "pfc-r8a7778",
- "vin0_data8", "vin0"),
- /* VIN1 */
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
- "vin1_clk", "vin1"),
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7778-vin.1", "pfc-r8a7778",
- "vin1_data8", "vin1"),
-};
-
-#define PFC 0xfffc0000
-#define PUPR4 0x110
-static void __init bockw_init(void)
-{
- void __iomem *base;
- struct clk *clk;
- struct platform_device *pdev;
- int i;
-
- r8a7778_clock_init();
- r8a7778_init_irq_extpin(1);
- r8a7778_add_standard_devices();
-
- platform_device_register_full(ðer_info);
-
- platform_device_register_full(&vin0_info);
- /* VIN1 has a pin conflict with Ether */
- if (!IS_ENABLED(CONFIG_SH_ETH))
- platform_device_register_full(&vin1_info);
- platform_device_register_data(NULL, "soc-camera-pdrv", 0,
- &iclink0_ml86v7667,
- sizeof(iclink0_ml86v7667));
- platform_device_register_data(NULL, "soc-camera-pdrv", 1,
- &iclink1_ml86v7667,
- sizeof(iclink1_ml86v7667));
-
- i2c_register_board_info(0, i2c0_devices,
- ARRAY_SIZE(i2c0_devices));
- spi_register_board_info(spi_board_info,
- ARRAY_SIZE(spi_board_info));
- pinctrl_register_mappings(bockw_pinctrl_map,
- ARRAY_SIZE(bockw_pinctrl_map));
- r8a7778_pinmux_init();
-
- platform_device_register_resndata(
- NULL, "sh_mmcif", -1,
- mmc_resources, ARRAY_SIZE(mmc_resources),
- &sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
-
- platform_device_register_resndata(
- NULL, "rcar_usb_phy", -1,
- usb_phy_resources,
- ARRAY_SIZE(usb_phy_resources),
- &usb_phy_platform_data,
- sizeof(struct rcar_phy_platform_data));
-
- regulator_register_fixed(0, dummy_supplies,
- ARRAY_SIZE(dummy_supplies));
- regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
- ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
-
- /* for SMSC */
- fpga = ioremap_nocache(FPGA, SZ_1M);
- if (fpga) {
- /*
- * CAUTION
- *
- * IRQ0/1 is cascaded interrupt from FPGA.
- * it should be cared in the future
- * Now, it is assuming IRQ0 was used only from SMSC.
- */
- u16 val = ioread16(fpga + IRQ0MR);
- val &= ~(1 << 4); /* enable SMSC911x */
- iowrite16(val, fpga + IRQ0MR);
-
- platform_device_register_resndata(
- NULL, "smsc911x", -1,
- smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
- &smsc911x_data, sizeof(smsc911x_data));
- }
-
- /* for SDHI */
- base = ioremap_nocache(PFC, 0x200);
- if (base) {
- /*
- * FIXME
- *
- * SDHI CD/WP pin needs pull-up
- */
- iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
- iounmap(base);
-
- platform_device_register_resndata(
- NULL, "sh_mobile_sdhi", 0,
- sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
- &sdhi0_info, sizeof(struct tmio_mmc_data));
- }
-
- /* for Audio */
- rsnd_codec_power(5, 1); /* enable ak4642 */
-
- platform_device_register_simple(
- "ak4554-adc-dac", 0, NULL, 0);
-
- platform_device_register_simple(
- "ak4554-adc-dac", 1, NULL, 0);
-
- pdev = platform_device_register_resndata(
- NULL, "rcar_sound", -1,
- rsnd_resources, ARRAY_SIZE(rsnd_resources),
- &rsnd_info, sizeof(rsnd_info));
-
- clk = clk_get(&pdev->dev, "clk_b");
- clk_set_rate(clk, 24576000);
- clk_put(clk);
-
- for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) {
- struct platform_device_info cardinfo = {
- .name = "asoc-simple-card",
- .id = i,
- .data = &rsnd_card_info[i],
- .size_data = sizeof(struct asoc_simple_card_info),
- .dma_mask = DMA_BIT_MASK(32),
- };
-
- platform_device_register_full(&cardinfo);
- }
-}
-
-static void __init bockw_init_late(void)
-{
- r8a7778_init_late();
- ADD_USB_FUNC_DEVICE_IF_POSSIBLE();
-}
-
-static const char *const bockw_boards_compat_dt[] __initconst = {
- "renesas,bockw",
- NULL,
-};
-
-DT_MACHINE_START(BOCKW_DT, "bockw")
- .init_early = shmobile_init_delay,
- .init_irq = r8a7778_init_irq_dt,
- .init_machine = bockw_init,
- .dt_compat = bockw_boards_compat_dt,
- .init_late = bockw_init_late,
-MACHINE_END
+++ /dev/null
-/*
- * r8a7778 clock framework support
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- *
- * based on r8a7779
- *
- * Copyright (C) 2011 Renesas Solutions Corp.
- * Copyright (C) 2011 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/*
- * MD MD MD MD PLLA PLLB EXTAL clki clkz
- * 19 18 12 11 (HMz) (MHz) (MHz)
- *----------------------------------------------------------------------------
- * 1 0 0 0 x21 x21 38.00 800 800
- * 1 0 0 1 x24 x24 33.33 800 800
- * 1 0 1 0 x28 x28 28.50 800 800
- * 1 0 1 1 x32 x32 25.00 800 800
- * 1 1 0 1 x24 x21 33.33 800 700
- * 1 1 1 0 x28 x21 28.50 800 600
- * 1 1 1 1 x32 x24 25.00 800 600
- */
-
-#include <linux/io.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-#include "common.h"
-
-#define MSTPCR0 IOMEM(0xffc80030)
-#define MSTPCR1 IOMEM(0xffc80034)
-#define MSTPCR3 IOMEM(0xffc8003c)
-#define MSTPSR1 IOMEM(0xffc80044)
-#define MSTPSR4 IOMEM(0xffc80048)
-#define MSTPSR6 IOMEM(0xffc8004c)
-#define MSTPCR4 IOMEM(0xffc80050)
-#define MSTPCR5 IOMEM(0xffc80054)
-#define MSTPCR6 IOMEM(0xffc80058)
-#define MODEMR 0xFFCC0020
-
-#define MD(nr) BIT(nr)
-
-/* ioremap() through clock mapping mandatory to avoid
- * collision with ARM coherent DMA virtual memory range.
- */
-
-static struct clk_mapping cpg_mapping = {
- .phys = 0xffc80000,
- .len = 0x80,
-};
-
-static struct clk extal_clk = {
- /* .rate will be updated on r8a7778_clock_init() */
- .mapping = &cpg_mapping,
-};
-
-static struct clk audio_clk_a = {
-};
-
-static struct clk audio_clk_b = {
-};
-
-static struct clk audio_clk_c = {
-};
-
-/*
- * clock ratio of these clock will be updated
- * on r8a7778_clock_init()
- */
-SH_FIXED_RATIO_CLK_SET(plla_clk, extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(pllb_clk, extal_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(i_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(s_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(s1_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(s3_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(s4_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(b_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(out_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(p_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(g_clk, plla_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(z_clk, pllb_clk, 1, 1);
-
-static struct clk *main_clks[] = {
- &extal_clk,
- &plla_clk,
- &pllb_clk,
- &i_clk,
- &s_clk,
- &s1_clk,
- &s3_clk,
- &s4_clk,
- &b_clk,
- &out_clk,
- &p_clk,
- &g_clk,
- &z_clk,
- &audio_clk_a,
- &audio_clk_b,
- &audio_clk_c,
-};
-
-enum {
- MSTP531, MSTP530,
- MSTP529, MSTP528, MSTP527, MSTP526, MSTP525, MSTP524, MSTP523,
- MSTP331,
- MSTP323, MSTP322, MSTP321,
- MSTP311, MSTP310,
- MSTP309, MSTP308, MSTP307,
- MSTP114,
- MSTP110, MSTP109,
- MSTP100,
- MSTP030,
- MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
- MSTP016, MSTP015, MSTP012, MSTP011, MSTP010,
- MSTP009, MSTP008, MSTP007,
- MSTP_NR };
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP531] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 31, 0), /* SCU0 */
- [MSTP530] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 30, 0), /* SCU1 */
- [MSTP529] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 29, 0), /* SCU2 */
- [MSTP528] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 28, 0), /* SCU3 */
- [MSTP527] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 27, 0), /* SCU4 */
- [MSTP526] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 26, 0), /* SCU5 */
- [MSTP525] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 25, 0), /* SCU6 */
- [MSTP524] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 24, 0), /* SCU7 */
- [MSTP523] = SH_CLK_MSTP32(&p_clk, MSTPCR5, 23, 0), /* SCU8 */
- [MSTP331] = SH_CLK_MSTP32(&s4_clk, MSTPCR3, 31, 0), /* MMC */
- [MSTP323] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 23, 0), /* SDHI0 */
- [MSTP322] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 22, 0), /* SDHI1 */
- [MSTP321] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 21, 0), /* SDHI2 */
- [MSTP311] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 11, 0), /* SSI4 */
- [MSTP310] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 10, 0), /* SSI5 */
- [MSTP309] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 9, 0), /* SSI6 */
- [MSTP308] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 8, 0), /* SSI7 */
- [MSTP307] = SH_CLK_MSTP32(&p_clk, MSTPCR3, 7, 0), /* SSI8 */
- [MSTP114] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 14, 0), /* Ether */
- [MSTP110] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 10, 0), /* VIN0 */
- [MSTP109] = SH_CLK_MSTP32(&s_clk, MSTPCR1, 9, 0), /* VIN1 */
- [MSTP100] = SH_CLK_MSTP32(&p_clk, MSTPCR1, 0, 0), /* USB0/1 */
- [MSTP030] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 30, 0), /* I2C0 */
- [MSTP029] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 29, 0), /* I2C1 */
- [MSTP028] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 28, 0), /* I2C2 */
- [MSTP027] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 27, 0), /* I2C3 */
- [MSTP026] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 26, 0), /* SCIF0 */
- [MSTP025] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 25, 0), /* SCIF1 */
- [MSTP024] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 24, 0), /* SCIF2 */
- [MSTP023] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 23, 0), /* SCIF3 */
- [MSTP022] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 22, 0), /* SCIF4 */
- [MSTP021] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 21, 0), /* SCIF5 */
- [MSTP016] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 16, 0), /* TMU0 */
- [MSTP015] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 15, 0), /* TMU1 */
- [MSTP012] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 12, 0), /* SSI0 */
- [MSTP011] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 11, 0), /* SSI1 */
- [MSTP010] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 10, 0), /* SSI2 */
- [MSTP009] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 9, 0), /* SSI3 */
- [MSTP008] = SH_CLK_MSTP32(&p_clk, MSTPCR0, 8, 0), /* SRU */
- [MSTP007] = SH_CLK_MSTP32(&s_clk, MSTPCR0, 7, 0), /* HSPI */
-};
-
-static struct clk_lookup lookups[] = {
- /* main */
- CLKDEV_CON_ID("shyway_clk", &s_clk),
- CLKDEV_CON_ID("peripheral_clk", &p_clk),
-
- /* MSTP32 clocks */
- CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */
- CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
- CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
- CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */
- CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
- CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */
- CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */
- CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */
- CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */
- CLKDEV_DEV_ID("ehci-platform", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
- CLKDEV_DEV_ID("ohci-platform", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
- CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP100]), /* USB FUNC */
- CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
- CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */
- CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
- CLKDEV_DEV_ID("ffc71000.i2c", &mstp_clks[MSTP029]), /* I2C1 */
- CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
- CLKDEV_DEV_ID("ffc72000.i2c", &mstp_clks[MSTP028]), /* I2C2 */
- CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
- CLKDEV_DEV_ID("ffc73000.i2c", &mstp_clks[MSTP027]), /* I2C3 */
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
- CLKDEV_DEV_ID("ffe40000.serial", &mstp_clks[MSTP026]), /* SCIF0 */
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
- CLKDEV_DEV_ID("ffe41000.serial", &mstp_clks[MSTP025]), /* SCIF1 */
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
- CLKDEV_DEV_ID("ffe42000.serial", &mstp_clks[MSTP024]), /* SCIF2 */
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
- CLKDEV_DEV_ID("ffe43000.serial", &mstp_clks[MSTP023]), /* SCIF3 */
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
- CLKDEV_DEV_ID("ffe44000.serial", &mstp_clks[MSTP022]), /* SCIF4 */
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
- CLKDEV_DEV_ID("ffe45000.serial", &mstp_clks[MSTP021]), /* SCIF5 */
- CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
- CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */
- CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
- CLKDEV_DEV_ID("fffc8000.spi", &mstp_clks[MSTP007]), /* HSPI1 */
- CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
- CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
- CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
-
- CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
- CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
- CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
- CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
- CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
- CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
- CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
- CLKDEV_ICK_ID("ssi.3", "rcar_sound", &mstp_clks[MSTP009]),
- CLKDEV_ICK_ID("ssi.4", "rcar_sound", &mstp_clks[MSTP311]),
- CLKDEV_ICK_ID("ssi.5", "rcar_sound", &mstp_clks[MSTP310]),
- CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]),
- CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]),
- CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]),
- CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]),
- CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]),
- CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]),
- CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]),
- CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]),
- CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]),
- CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]),
- CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]),
- CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]),
- CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]),
- CLKDEV_ICK_ID("fck", "ffd80000.timer", &mstp_clks[MSTP016]),
- CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]),
- CLKDEV_ICK_ID("fck", "ffd81000.timer", &mstp_clks[MSTP015]),
-};
-
-void __init r8a7778_clock_init(void)
-{
- void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
- u32 mode;
- int k, ret = 0;
-
- BUG_ON(!modemr);
- mode = ioread32(modemr);
- iounmap(modemr);
-
- switch (mode & (MD(19) | MD(18) | MD(12) | MD(11))) {
- case MD(19):
- extal_clk.rate = 38000000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 21, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
- break;
- case MD(19) | MD(11):
- extal_clk.rate = 33333333;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1);
- break;
- case MD(19) | MD(12):
- extal_clk.rate = 28500000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 28, 1);
- break;
- case MD(19) | MD(12) | MD(11):
- extal_clk.rate = 25000000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 32, 1);
- break;
- case MD(19) | MD(18) | MD(11):
- extal_clk.rate = 33333333;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 24, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
- break;
- case MD(19) | MD(18) | MD(12):
- extal_clk.rate = 28500000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 28, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 21, 1);
- break;
- case MD(19) | MD(18) | MD(12) | MD(11):
- extal_clk.rate = 25000000;
- SH_CLK_SET_RATIO(&plla_clk_ratio, 32, 1);
- SH_CLK_SET_RATIO(&pllb_clk_ratio, 24, 1);
- break;
- default:
- BUG();
- }
-
- if (mode & MD(1)) {
- SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1);
- SH_CLK_SET_RATIO(&s_clk_ratio, 1, 3);
- SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 6);
- SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4);
- SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8);
- SH_CLK_SET_RATIO(&p_clk_ratio, 1, 12);
- SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12);
- if (mode & MD(2)) {
- SH_CLK_SET_RATIO(&b_clk_ratio, 1, 18);
- SH_CLK_SET_RATIO(&out_clk_ratio, 1, 18);
- } else {
- SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12);
- SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12);
- }
- } else {
- SH_CLK_SET_RATIO(&i_clk_ratio, 1, 1);
- SH_CLK_SET_RATIO(&s_clk_ratio, 1, 4);
- SH_CLK_SET_RATIO(&s1_clk_ratio, 1, 8);
- SH_CLK_SET_RATIO(&s3_clk_ratio, 1, 4);
- SH_CLK_SET_RATIO(&s4_clk_ratio, 1, 8);
- SH_CLK_SET_RATIO(&p_clk_ratio, 1, 16);
- SH_CLK_SET_RATIO(&g_clk_ratio, 1, 12);
- if (mode & MD(2)) {
- SH_CLK_SET_RATIO(&b_clk_ratio, 1, 16);
- SH_CLK_SET_RATIO(&out_clk_ratio, 1, 16);
- } else {
- SH_CLK_SET_RATIO(&b_clk_ratio, 1, 12);
- SH_CLK_SET_RATIO(&out_clk_ratio, 1, 12);
- }
- }
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- shmobile_clk_init();
- else
- panic("failed to setup r8a7778 clocks\n");
-}
+++ /dev/null
-/*
- * SH-Mobile Clock Framework
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sh_clk.h>
-
-#include "clock.h"
-#include "common.h"
-
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
-{
- struct clk_ratio *p = clk->priv;
-
- return clk->parent->rate / p->div * p->mul;
-};
-
-struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
- .recalc = shmobile_fixed_ratio_clk_recalc,
-};
-
-int __init shmobile_clk_init(void)
-{
- /* Kick the child clocks.. */
- recalculate_root_clocks();
-
- /* Enable the necessary init clocks */
- clk_enable_init_clocks();
-
- return 0;
-}
+++ /dev/null
-#ifndef CLOCK_H
-#define CLOCK_H
-
-/* legacy clock implementation */
-
-struct clk;
-unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
-extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
-
-/* clock ratio */
-struct clk_ratio {
- int mul;
- int div;
-};
-
-#define SH_CLK_RATIO(name, m, d) \
-static struct clk_ratio name ##_ratio = { \
- .mul = m, \
- .div = d, \
-}
-
-#define SH_FIXED_RATIO_CLKg(name, p, r) \
-struct clk name = { \
- .parent = &p, \
- .ops = &shmobile_fixed_ratio_clk_ops,\
- .priv = &r ## _ratio, \
-}
-
-#define SH_FIXED_RATIO_CLK(name, p, r) \
-static SH_FIXED_RATIO_CLKg(name, p, r)
-
-#define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \
- SH_CLK_RATIO(name, m, d); \
- SH_FIXED_RATIO_CLK(name, p, name)
-
-#define SH_CLK_SET_RATIO(p, m, d) \
-do { \
- (p)->mul = m; \
- (p)->div = d; \
-} while (0)
-
-#endif
#ifndef __ARCH_MACH_COMMON_H
#define __ARCH_MACH_COMMON_H
-extern void shmobile_earlytimer_init(void);
extern void shmobile_init_delay(void);
-struct twd_local_timer;
-extern void shmobile_setup_console(void);
extern void shmobile_boot_vector(void);
extern unsigned long shmobile_boot_fn;
extern unsigned long shmobile_boot_arg;
extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
-struct clk;
-extern int shmobile_clk_init(void);
extern struct platform_suspend_ops shmobile_suspend_ops;
#ifdef CONFIG_SUSPEND
+++ /dev/null
-/*
- * SH-Mobile Console
- *
- * Copyright (C) 2010 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/mach/map.h>
-#include "common.h"
-
-void __init shmobile_setup_console(void)
-{
- parse_early_param();
-
- /* Let earlyprintk output early console messages */
- early_platform_driver_probe("earlyprintk", 1, 1);
-}
+++ /dev/null
-#ifndef __ASM_MACH_INTC_H
-#define __ASM_MACH_INTC_H
-#include <linux/sh_intc.h>
-
-#define INTC_IRQ_PINS_ENUM_16L(p) \
- p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7, \
- p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15
-
-#define INTC_IRQ_PINS_ENUM_16H(p) \
- p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23, \
- p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31
-
-#define INTC_IRQ_PINS_VECT_16L(p, vect) \
- vect(p ## _IRQ0, 0x0200), vect(p ## _IRQ1, 0x0220), \
- vect(p ## _IRQ2, 0x0240), vect(p ## _IRQ3, 0x0260), \
- vect(p ## _IRQ4, 0x0280), vect(p ## _IRQ5, 0x02a0), \
- vect(p ## _IRQ6, 0x02c0), vect(p ## _IRQ7, 0x02e0), \
- vect(p ## _IRQ8, 0x0300), vect(p ## _IRQ9, 0x0320), \
- vect(p ## _IRQ10, 0x0340), vect(p ## _IRQ11, 0x0360), \
- vect(p ## _IRQ12, 0x0380), vect(p ## _IRQ13, 0x03a0), \
- vect(p ## _IRQ14, 0x03c0), vect(p ## _IRQ15, 0x03e0)
-
-#define INTC_IRQ_PINS_VECT_16H(p, vect) \
- vect(p ## _IRQ16, 0x3200), vect(p ## _IRQ17, 0x3220), \
- vect(p ## _IRQ18, 0x3240), vect(p ## _IRQ19, 0x3260), \
- vect(p ## _IRQ20, 0x3280), vect(p ## _IRQ21, 0x32a0), \
- vect(p ## _IRQ22, 0x32c0), vect(p ## _IRQ23, 0x32e0), \
- vect(p ## _IRQ24, 0x3300), vect(p ## _IRQ25, 0x3320), \
- vect(p ## _IRQ26, 0x3340), vect(p ## _IRQ27, 0x3360), \
- vect(p ## _IRQ28, 0x3380), vect(p ## _IRQ29, 0x33a0), \
- vect(p ## _IRQ30, 0x33c0), vect(p ## _IRQ31, 0x33e0)
-
-#define INTC_IRQ_PINS_MASK_16L(p, base) \
- { base + 0x40, base + 0x60, 8, /* INTMSK00A / INTMSKCLR00A */ \
- { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
- { base + 0x44, base + 0x64, 8, /* INTMSK10A / INTMSKCLR10A */ \
- { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_MASK_16H(p, base) \
- { base + 0x48, base + 0x68, 8, /* INTMSK20A / INTMSKCLR20A */ \
- { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
- { base + 0x4c, base + 0x6c, 8, /* INTMSK30A / INTMSKCLR30A */ \
- { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_PRIO_16L(p, base) \
- { base + 0x10, 0, 32, 4, /* INTPRI00A */ \
- { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
- { base + 0x14, 0, 32, 4, /* INTPRI10A */ \
- { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_PRIO_16H(p, base) \
- { base + 0x18, 0, 32, 4, /* INTPRI20A */ \
- { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
- { base + 0x1c, 0, 32, 4, /* INTPRI30A */ \
- { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_SENSE_16L(p, base) \
- { base + 0x00, 32, 4, /* ICR1A */ \
- { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
- { base + 0x04, 32, 4, /* ICR2A */ \
- { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_SENSE_16H(p, base) \
- { base + 0x08, 32, 4, /* ICR3A */ \
- { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
- { base + 0x0c, 32, 4, /* ICR4A */ \
- { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_ACK_16L(p, base) \
- { base + 0x20, 0, 8, /* INTREQ00A */ \
- { p ## _IRQ0, p ## _IRQ1, p ## _IRQ2, p ## _IRQ3, \
- p ## _IRQ4, p ## _IRQ5, p ## _IRQ6, p ## _IRQ7 } }, \
- { base + 0x24, 0, 8, /* INTREQ10A */ \
- { p ## _IRQ8, p ## _IRQ9, p ## _IRQ10, p ## _IRQ11, \
- p ## _IRQ12, p ## _IRQ13, p ## _IRQ14, p ## _IRQ15 } }
-
-#define INTC_IRQ_PINS_ACK_16H(p, base) \
- { base + 0x28, 0, 8, /* INTREQ20A */ \
- { p ## _IRQ16, p ## _IRQ17, p ## _IRQ18, p ## _IRQ19, \
- p ## _IRQ20, p ## _IRQ21, p ## _IRQ22, p ## _IRQ23 } }, \
- { base + 0x2c, 0, 8, /* INTREQ30A */ \
- { p ## _IRQ24, p ## _IRQ25, p ## _IRQ26, p ## _IRQ27, \
- p ## _IRQ28, p ## _IRQ29, p ## _IRQ30, p ## _IRQ31 } }
-
-#define INTC_IRQ_PINS_16(p, base, vect, str) \
- \
-static struct resource p ## _resources[] __initdata = { \
- [0] = { \
- .start = base, \
- .end = base + 0x64, \
- .flags = IORESOURCE_MEM, \
- }, \
-}; \
- \
-enum { \
- p ## _UNUSED = 0, \
- INTC_IRQ_PINS_ENUM_16L(p), \
-}; \
- \
-static struct intc_vect p ## _vectors[] __initdata = { \
- INTC_IRQ_PINS_VECT_16L(p, vect), \
-}; \
- \
-static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
- INTC_IRQ_PINS_MASK_16L(p, base), \
-}; \
- \
-static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
- INTC_IRQ_PINS_PRIO_16L(p, base), \
-}; \
- \
-static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
- INTC_IRQ_PINS_SENSE_16L(p, base), \
-}; \
- \
-static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
- INTC_IRQ_PINS_ACK_16L(p, base), \
-}; \
- \
-static struct intc_desc p ## _desc __initdata = { \
- .name = str, \
- .resource = p ## _resources, \
- .num_resources = ARRAY_SIZE(p ## _resources), \
- .hw = INTC_HW_DESC(p ## _vectors, NULL, \
- p ## _mask_registers, p ## _prio_registers, \
- p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_16H(p, base, vect, str) \
- \
-static struct resource p ## _resources[] __initdata = { \
- [0] = { \
- .start = base, \
- .end = base + 0x64, \
- .flags = IORESOURCE_MEM, \
- }, \
-}; \
- \
-enum { \
- p ## _UNUSED = 0, \
- INTC_IRQ_PINS_ENUM_16H(p), \
-}; \
- \
-static struct intc_vect p ## _vectors[] __initdata = { \
- INTC_IRQ_PINS_VECT_16H(p, vect), \
-}; \
- \
-static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
- INTC_IRQ_PINS_MASK_16H(p, base), \
-}; \
- \
-static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
- INTC_IRQ_PINS_PRIO_16H(p, base), \
-}; \
- \
-static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
- INTC_IRQ_PINS_SENSE_16H(p, base), \
-}; \
- \
-static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
- INTC_IRQ_PINS_ACK_16H(p, base), \
-}; \
- \
-static struct intc_desc p ## _desc __initdata = { \
- .name = str, \
- .resource = p ## _resources, \
- .num_resources = ARRAY_SIZE(p ## _resources), \
- .hw = INTC_HW_DESC(p ## _vectors, NULL, \
- p ## _mask_registers, p ## _prio_registers, \
- p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_IRQ_PINS_32(p, base, vect, str) \
- \
-static struct resource p ## _resources[] __initdata = { \
- [0] = { \
- .start = base, \
- .end = base + 0x6c, \
- .flags = IORESOURCE_MEM, \
- }, \
-}; \
- \
-enum { \
- p ## _UNUSED = 0, \
- INTC_IRQ_PINS_ENUM_16L(p), \
- INTC_IRQ_PINS_ENUM_16H(p), \
-}; \
- \
-static struct intc_vect p ## _vectors[] __initdata = { \
- INTC_IRQ_PINS_VECT_16L(p, vect), \
- INTC_IRQ_PINS_VECT_16H(p, vect), \
-}; \
- \
-static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
- INTC_IRQ_PINS_MASK_16L(p, base), \
- INTC_IRQ_PINS_MASK_16H(p, base), \
-}; \
- \
-static struct intc_prio_reg p ## _prio_registers[] __initdata = { \
- INTC_IRQ_PINS_PRIO_16L(p, base), \
- INTC_IRQ_PINS_PRIO_16H(p, base), \
-}; \
- \
-static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
- INTC_IRQ_PINS_SENSE_16L(p, base), \
- INTC_IRQ_PINS_SENSE_16H(p, base), \
-}; \
- \
-static struct intc_mask_reg p ## _ack_registers[] __initdata = { \
- INTC_IRQ_PINS_ACK_16L(p, base), \
- INTC_IRQ_PINS_ACK_16H(p, base), \
-}; \
- \
-static struct intc_desc p ## _desc __initdata = { \
- .name = str, \
- .resource = p ## _resources, \
- .num_resources = ARRAY_SIZE(p ## _resources), \
- .hw = INTC_HW_DESC(p ## _vectors, NULL, \
- p ## _mask_registers, p ## _prio_registers, \
- p ## _sense_registers, p ## _ack_registers) \
-}
-
-#define INTC_PINT_E_EMPTY
-#define INTC_PINT_E_NONE 0, 0, 0, 0, 0, 0, 0, 0,
-#define INTC_PINT_E(p) \
- PINT ## p ## 0, PINT ## p ## 1, PINT ## p ## 2, PINT ## p ## 3, \
- PINT ## p ## 4, PINT ## p ## 5, PINT ## p ## 6, PINT ## p ## 7,
-
-#define INTC_PINT_V_NONE
-#define INTC_PINT_V(p, vect) \
- vect(PINT ## p ## 0, 0), vect(PINT ## p ## 1, 1), \
- vect(PINT ## p ## 2, 2), vect(PINT ## p ## 3, 3), \
- vect(PINT ## p ## 4, 4), vect(PINT ## p ## 5, 5), \
- vect(PINT ## p ## 6, 6), vect(PINT ## p ## 7, 7),
-
-#define INTC_PINT(p, mask_reg, sense_base, str, \
- enums_1, enums_2, enums_3, enums_4, \
- vect_1, vect_2, vect_3, vect_4, \
- mask_a, mask_b, mask_c, mask_d, \
- sense_a, sense_b, sense_c, sense_d) \
- \
-enum { \
- PINT ## p ## _UNUSED = 0, \
- enums_1 enums_2 enums_3 enums_4 \
-}; \
- \
-static struct intc_vect p ## _vectors[] __initdata = { \
- vect_1 vect_2 vect_3 vect_4 \
-}; \
- \
-static struct intc_mask_reg p ## _mask_registers[] __initdata = { \
- { mask_reg, 0, 32, /* PINTER */ \
- { mask_a mask_b mask_c mask_d } } \
-}; \
- \
-static struct intc_sense_reg p ## _sense_registers[] __initdata = { \
- { sense_base + 0x00, 16, 2, /* PINTCR */ \
- { sense_a } }, \
- { sense_base + 0x04, 16, 2, /* PINTCR */ \
- { sense_b } }, \
- { sense_base + 0x08, 16, 2, /* PINTCR */ \
- { sense_c } }, \
- { sense_base + 0x0c, 16, 2, /* PINTCR */ \
- { sense_d } }, \
-}; \
- \
-static struct intc_desc p ## _desc __initdata = { \
- .name = str, \
- .hw = INTC_HW_DESC(p ## _vectors, NULL, \
- p ## _mask_registers, NULL, \
- p ## _sense_registers, NULL), \
-}
-
-/* INTCS */
-#define INTCS_VECT_BASE 0x3400
-#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
-#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
-
-#endif /* __ASM_MACH_INTC_H */
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#include <linux/clk/shmobile.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/of.h>
return true;
}
-static int rmobile_pd_attach_dev(struct generic_pm_domain *domain,
- struct device *dev)
-{
- int error;
-
- error = pm_clk_create(dev);
- if (error) {
- dev_err(dev, "pm_clk_create failed %d\n", error);
- return error;
- }
-
- error = pm_clk_add(dev, NULL);
- if (error) {
- dev_err(dev, "pm_clk_add failed %d\n", error);
- goto fail;
- }
-
- return 0;
-
-fail:
- pm_clk_destroy(dev);
- return error;
-}
-
-static void rmobile_pd_detach_dev(struct generic_pm_domain *domain,
- struct device *dev)
-{
- pm_clk_destroy(dev);
-}
-
static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd)
{
struct generic_pm_domain *genpd = &rmobile_pd->genpd;
genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup;
genpd->power_off = rmobile_pd_power_down;
genpd->power_on = rmobile_pd_power_up;
- genpd->attach_dev = rmobile_pd_attach_dev;
- genpd->detach_dev = rmobile_pd_detach_dev;
+ genpd->attach_dev = cpg_mstp_attach_dev;
+ genpd->detach_dev = cpg_mstp_detach_dev;
__rmobile_pd_power_up(rmobile_pd, false);
}
#include <linux/pm_domain.h>
-#define DEFAULT_DEV_LATENCY_NS 250000
-
-struct platform_device;
-
struct rmobile_pm_domain {
struct generic_pm_domain genpd;
struct dev_power_governor *gov;
bool no_debug;
};
-struct pm_domain_device {
- const char *domain_name;
- struct platform_device *pdev;
-};
-
#endif /* PM_RMOBILE_H */
+++ /dev/null
-/*
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_R8A7778_H__
-#define __ASM_R8A7778_H__
-
-#include <linux/sh_eth.h>
-
-/* HPB-DMA slave IDs */
-enum {
- HPBDMA_SLAVE_DUMMY,
- HPBDMA_SLAVE_SDHI0_TX,
- HPBDMA_SLAVE_SDHI0_RX,
- HPBDMA_SLAVE_SSI0_TX,
- HPBDMA_SLAVE_SSI0_RX,
- HPBDMA_SLAVE_SSI1_TX,
- HPBDMA_SLAVE_SSI1_RX,
- HPBDMA_SLAVE_SSI2_TX,
- HPBDMA_SLAVE_SSI2_RX,
- HPBDMA_SLAVE_SSI3_TX,
- HPBDMA_SLAVE_SSI3_RX,
- HPBDMA_SLAVE_SSI4_TX,
- HPBDMA_SLAVE_SSI4_RX,
- HPBDMA_SLAVE_SSI5_TX,
- HPBDMA_SLAVE_SSI5_RX,
- HPBDMA_SLAVE_SSI6_TX,
- HPBDMA_SLAVE_SSI6_RX,
- HPBDMA_SLAVE_SSI7_TX,
- HPBDMA_SLAVE_SSI7_RX,
- HPBDMA_SLAVE_SSI8_TX,
- HPBDMA_SLAVE_SSI8_RX,
- HPBDMA_SLAVE_HPBIF0_TX,
- HPBDMA_SLAVE_HPBIF0_RX,
- HPBDMA_SLAVE_HPBIF1_TX,
- HPBDMA_SLAVE_HPBIF1_RX,
- HPBDMA_SLAVE_HPBIF2_TX,
- HPBDMA_SLAVE_HPBIF2_RX,
- HPBDMA_SLAVE_HPBIF3_TX,
- HPBDMA_SLAVE_HPBIF3_RX,
- HPBDMA_SLAVE_HPBIF4_TX,
- HPBDMA_SLAVE_HPBIF4_RX,
- HPBDMA_SLAVE_HPBIF5_TX,
- HPBDMA_SLAVE_HPBIF5_RX,
- HPBDMA_SLAVE_HPBIF6_TX,
- HPBDMA_SLAVE_HPBIF6_RX,
- HPBDMA_SLAVE_HPBIF7_TX,
- HPBDMA_SLAVE_HPBIF7_RX,
- HPBDMA_SLAVE_HPBIF8_TX,
- HPBDMA_SLAVE_HPBIF8_RX,
- HPBDMA_SLAVE_USBFUNC_TX,
- HPBDMA_SLAVE_USBFUNC_RX,
-};
-
-extern void r8a7778_add_standard_devices(void);
-extern void r8a7778_add_standard_devices_dt(void);
-extern void r8a7778_add_dt_devices(void);
-
-extern void r8a7778_init_late(void);
-extern void r8a7778_init_irq_dt(void);
-extern void r8a7778_clock_init(void);
-extern void r8a7778_init_irq_extpin(int irlm);
-extern void r8a7778_init_irq_extpin_dt(int irlm);
-extern void r8a7778_pinmux_init(void);
-
-extern int r8a7778_usb_phy_power(bool enable);
-
-#endif /* __ASM_R8A7778_H__ */
#ifndef __ASM_R8A7779_H__
#define __ASM_R8A7779_H__
-#include <linux/sh_clk.h>
-
extern void r8a7779_pm_init(void);
#ifdef CONFIG_PM
*/
#include <linux/clk/shmobile.h>
-#include <linux/kernel.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/dma-rcar-hpbdma.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/platform_device.h>
#include <linux/irqchip.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
-#include <linux/pm_runtime.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/hcd.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
#include "common.h"
#include "irqs.h"
-#include "r8a7778.h"
#define MODEMR 0xffcc0020
-#ifdef CONFIG_COMMON_CLK
static void __init r8a7778_timer_init(void)
{
u32 mode;
iounmap(modemr);
r8a7778_clocks_init(mode);
}
-#endif
-/* SCIF */
-#define R8A7778_SCIF(index, baseaddr, irq) \
-static struct plat_sci_port scif##index##_platform_data = { \
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
- .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \
- .type = PORT_SCIF, \
-}; \
- \
-static struct resource scif##index##_resources[] = { \
- DEFINE_RES_MEM(baseaddr, 0x100), \
- DEFINE_RES_IRQ(irq), \
-}
-
-R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
-R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67));
-R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68));
-R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69));
-R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
-R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
-
-#define r8a7778_register_scif(index) \
- platform_device_register_resndata(NULL, "sh-sci", index, \
- scif##index##_resources, \
- ARRAY_SIZE(scif##index##_resources), \
- &scif##index##_platform_data, \
- sizeof(scif##index##_platform_data))
-
-/* TMU */
-static struct sh_timer_config sh_tmu0_platform_data = {
- .channels_mask = 7,
-};
-
-static struct resource sh_tmu0_resources[] = {
- DEFINE_RES_MEM(0xffd80000, 0x30),
- DEFINE_RES_IRQ(gic_iid(0x40)),
- DEFINE_RES_IRQ(gic_iid(0x41)),
- DEFINE_RES_IRQ(gic_iid(0x42)),
-};
-
-#define r8a7778_register_tmu(idx) \
- platform_device_register_resndata( \
- NULL, "sh-tmu", idx, \
- sh_tmu##idx##_resources, \
- ARRAY_SIZE(sh_tmu##idx##_resources), \
- &sh_tmu##idx##_platform_data, \
- sizeof(sh_tmu##idx##_platform_data))
-
-int r8a7778_usb_phy_power(bool enable)
-{
- static struct usb_phy *phy = NULL;
- int ret = 0;
-
- if (!phy)
- phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
- if (IS_ERR(phy)) {
- pr_err("kernel doesn't have usb phy driver\n");
- return PTR_ERR(phy);
- }
-
- if (enable)
- ret = usb_phy_init(phy);
- else
- usb_phy_shutdown(phy);
-
- return ret;
-}
-
-/* USB */
-static int usb_power_on(struct platform_device *pdev)
-{
- int ret = r8a7778_usb_phy_power(true);
-
- if (ret)
- return ret;
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
-
- return 0;
-}
-
-static void usb_power_off(struct platform_device *pdev)
-{
- if (r8a7778_usb_phy_power(false))
- return;
-
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-}
-
-static int ehci_init_internal_buffer(struct usb_hcd *hcd)
-{
- /*
- * Below are recommended values from the datasheet;
- * see [USB :: Setting of EHCI Internal Buffer].
- */
- /* EHCI IP internal buffer setting */
- iowrite32(0x00ff0040, hcd->regs + 0x0094);
- /* EHCI IP internal buffer enable */
- iowrite32(0x00000001, hcd->regs + 0x009C);
-
- return 0;
-}
-
-static struct usb_ehci_pdata ehci_pdata __initdata = {
- .power_on = usb_power_on,
- .power_off = usb_power_off,
- .power_suspend = usb_power_off,
- .pre_setup = ehci_init_internal_buffer,
-};
-
-static struct resource ehci_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe70000, 0x400),
- DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-static struct usb_ohci_pdata ohci_pdata __initdata = {
- .power_on = usb_power_on,
- .power_off = usb_power_off,
- .power_suspend = usb_power_off,
-};
-
-static struct resource ohci_resources[] __initdata = {
- DEFINE_RES_MEM(0xffe70400, 0x400),
- DEFINE_RES_IRQ(gic_iid(0x4c)),
-};
-
-#define USB_PLATFORM_INFO(hci) \
-static struct platform_device_info hci##_info __initdata = { \
- .name = #hci "-platform", \
- .id = -1, \
- .res = hci##_resources, \
- .num_res = ARRAY_SIZE(hci##_resources), \
- .data = &hci##_pdata, \
- .size_data = sizeof(hci##_pdata), \
- .dma_mask = DMA_BIT_MASK(32), \
-}
-
-USB_PLATFORM_INFO(ehci);
-USB_PLATFORM_INFO(ohci);
-
-/* PFC/GPIO */
-static struct resource pfc_resources[] __initdata = {
- DEFINE_RES_MEM(0xfffc0000, 0x118),
-};
-
-#define R8A7778_GPIO(idx) \
-static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \
- DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \
- DEFINE_RES_IRQ(gic_iid(0x87)), \
-}; \
- \
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
- .gpio_base = 32 * (idx), \
- .irq_base = GPIO_IRQ_BASE(idx), \
- .number_of_pins = 32, \
- .pctl_name = "pfc-r8a7778", \
-}
-
-R8A7778_GPIO(0);
-R8A7778_GPIO(1);
-R8A7778_GPIO(2);
-R8A7778_GPIO(3);
-R8A7778_GPIO(4);
-
-#define r8a7778_register_gpio(idx) \
- platform_device_register_resndata( \
- NULL, "gpio_rcar", idx, \
- r8a7778_gpio##idx##_resources, \
- ARRAY_SIZE(r8a7778_gpio##idx##_resources), \
- &r8a7778_gpio##idx##_platform_data, \
- sizeof(r8a7778_gpio##idx##_platform_data))
-
-void __init r8a7778_pinmux_init(void)
-{
- platform_device_register_simple(
- "pfc-r8a7778", -1,
- pfc_resources,
- ARRAY_SIZE(pfc_resources));
-
- r8a7778_register_gpio(0);
- r8a7778_register_gpio(1);
- r8a7778_register_gpio(2);
- r8a7778_register_gpio(3);
- r8a7778_register_gpio(4);
-};
-
-/* I2C */
-static struct resource i2c_resources[] __initdata = {
- /* I2C0 */
- DEFINE_RES_MEM(0xffc70000, 0x1000),
- DEFINE_RES_IRQ(gic_iid(0x63)),
- /* I2C1 */
- DEFINE_RES_MEM(0xffc71000, 0x1000),
- DEFINE_RES_IRQ(gic_iid(0x6e)),
- /* I2C2 */
- DEFINE_RES_MEM(0xffc72000, 0x1000),
- DEFINE_RES_IRQ(gic_iid(0x6c)),
- /* I2C3 */
- DEFINE_RES_MEM(0xffc73000, 0x1000),
- DEFINE_RES_IRQ(gic_iid(0x6d)),
-};
-
-static void __init r8a7778_register_i2c(int id)
-{
- BUG_ON(id < 0 || id > 3);
-
- platform_device_register_simple(
- "i2c-rcar", id,
- i2c_resources + (2 * id), 2);
-}
-
-/* HSPI */
-static struct resource hspi_resources[] __initdata = {
- /* HSPI0 */
- DEFINE_RES_MEM(0xfffc7000, 0x18),
- DEFINE_RES_IRQ(gic_iid(0x5f)),
- /* HSPI1 */
- DEFINE_RES_MEM(0xfffc8000, 0x18),
- DEFINE_RES_IRQ(gic_iid(0x74)),
- /* HSPI2 */
- DEFINE_RES_MEM(0xfffc6000, 0x18),
- DEFINE_RES_IRQ(gic_iid(0x75)),
-};
-
-static void __init r8a7778_register_hspi(int id)
-{
- BUG_ON(id < 0 || id > 2);
-
- platform_device_register_simple(
- "sh-hspi", id,
- hspi_resources + (2 * id), 2);
-}
-
-void __init r8a7778_add_dt_devices(void)
-{
-#ifdef CONFIG_CACHE_L2X0
- void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
- if (base) {
- /*
- * Shared attribute override enable, 64K*16way
- * don't call iounmap(base)
- */
- l2x0_init(base, 0x00400000, 0xc20f0fff);
- }
-#endif
-}
-
-/* HPB-DMA */
-
-/* Asynchronous mode register (ASYNCMDR) bits */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */
-#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */
-
-#define HPBDMA_SSI(_id) \
-{ \
- .id = HPBDMA_SLAVE_SSI## _id ##_TX, \
- .addr = 0xffd91008 + (_id * 0x40), \
- .dcr = HPB_DMAE_DCR_CT | \
- HPB_DMAE_DCR_DIP | \
- HPB_DMAE_DCR_SPDS_32BIT | \
- HPB_DMAE_DCR_DMDL | \
- HPB_DMAE_DCR_DPDS_32BIT, \
- .port = _id + (_id << 8), \
- .dma_ch = (28 + _id), \
-}, { \
- .id = HPBDMA_SLAVE_SSI## _id ##_RX, \
- .addr = 0xffd9100c + (_id * 0x40), \
- .dcr = HPB_DMAE_DCR_CT | \
- HPB_DMAE_DCR_DIP | \
- HPB_DMAE_DCR_SMDL | \
- HPB_DMAE_DCR_SPDS_32BIT | \
- HPB_DMAE_DCR_DPDS_32BIT, \
- .port = _id + (_id << 8), \
- .dma_ch = (28 + _id), \
-}
-
-#define HPBDMA_HPBIF(_id) \
-{ \
- .id = HPBDMA_SLAVE_HPBIF## _id ##_TX, \
- .addr = 0xffda0000 + (_id * 0x1000), \
- .dcr = HPB_DMAE_DCR_CT | \
- HPB_DMAE_DCR_DIP | \
- HPB_DMAE_DCR_SPDS_32BIT | \
- HPB_DMAE_DCR_DMDL | \
- HPB_DMAE_DCR_DPDS_32BIT, \
- .port = 0x1111, \
- .dma_ch = (28 + _id), \
-}, { \
- .id = HPBDMA_SLAVE_HPBIF## _id ##_RX, \
- .addr = 0xffda0000 + (_id * 0x1000), \
- .dcr = HPB_DMAE_DCR_CT | \
- HPB_DMAE_DCR_DIP | \
- HPB_DMAE_DCR_SMDL | \
- HPB_DMAE_DCR_SPDS_32BIT | \
- HPB_DMAE_DCR_DPDS_32BIT, \
- .port = 0x1111, \
- .dma_ch = (28 + _id), \
-}
-
-static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
- {
- .id = HPBDMA_SLAVE_SDHI0_TX,
- .addr = 0xffe4c000 + 0x30,
- .dcr = HPB_DMAE_DCR_SPDS_16BIT |
- HPB_DMAE_DCR_DMDL |
- HPB_DMAE_DCR_DPDS_16BIT,
- .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
- HPB_DMAE_ASYNCRSTR_ASRST22 |
- HPB_DMAE_ASYNCRSTR_ASRST23,
- .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
- .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK,
- .port = 0x0D0C,
- .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
- .dma_ch = 21,
- }, {
- .id = HPBDMA_SLAVE_SDHI0_RX,
- .addr = 0xffe4c000 + 0x30,
- .dcr = HPB_DMAE_DCR_SMDL |
- HPB_DMAE_DCR_SPDS_16BIT |
- HPB_DMAE_DCR_DPDS_16BIT,
- .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
- HPB_DMAE_ASYNCRSTR_ASRST22 |
- HPB_DMAE_ASYNCRSTR_ASRST23,
- .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
- .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK,
- .port = 0x0D0C,
- .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
- .dma_ch = 22,
- }, {
- .id = HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
- .addr = 0xffe60018,
- .dcr = HPB_DMAE_DCR_SPDS_32BIT |
- HPB_DMAE_DCR_DMDL |
- HPB_DMAE_DCR_DPDS_32BIT,
- .port = 0x0000,
- .dma_ch = 14,
- }, {
- .id = HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
- .addr = 0xffe6001c,
- .dcr = HPB_DMAE_DCR_SMDL |
- HPB_DMAE_DCR_SPDS_32BIT |
- HPB_DMAE_DCR_DPDS_32BIT,
- .port = 0x0101,
- .dma_ch = 15,
- },
-
- HPBDMA_SSI(0),
- HPBDMA_SSI(1),
- HPBDMA_SSI(2),
- HPBDMA_SSI(3),
- HPBDMA_SSI(4),
- HPBDMA_SSI(5),
- HPBDMA_SSI(6),
- HPBDMA_SSI(7),
- HPBDMA_SSI(8),
-
- HPBDMA_HPBIF(0),
- HPBDMA_HPBIF(1),
- HPBDMA_HPBIF(2),
- HPBDMA_HPBIF(3),
- HPBDMA_HPBIF(4),
- HPBDMA_HPBIF(5),
- HPBDMA_HPBIF(6),
- HPBDMA_HPBIF(7),
- HPBDMA_HPBIF(8),
-};
-
-static const struct hpb_dmae_channel hpb_dmae_channels[] = {
- HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
- HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
- HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
- HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX), /* ch. 28 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX), /* ch. 28 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX), /* ch. 29 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX), /* ch. 29 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX), /* ch. 30 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX), /* ch. 30 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX), /* ch. 31 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX), /* ch. 31 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX), /* ch. 32 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX), /* ch. 32 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX), /* ch. 33 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX), /* ch. 33 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX), /* ch. 34 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX), /* ch. 34 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX), /* ch. 35 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX), /* ch. 35 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX), /* ch. 36 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX), /* ch. 36 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
- HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
-};
-
-static struct hpb_dmae_pdata dma_platform_data __initdata = {
- .slaves = hpb_dmae_slaves,
- .num_slaves = ARRAY_SIZE(hpb_dmae_slaves),
- .channels = hpb_dmae_channels,
- .num_channels = ARRAY_SIZE(hpb_dmae_channels),
- .ts_shift = {
- [XMIT_SZ_8BIT] = 0,
- [XMIT_SZ_16BIT] = 1,
- [XMIT_SZ_32BIT] = 2,
- },
- .num_hw_channels = 39,
-};
-
-static struct resource hpb_dmae_resources[] __initdata = {
- /* Channel registers */
- DEFINE_RES_MEM(0xffc08000, 0x1000),
- /* Common registers */
- DEFINE_RES_MEM(0xffc09000, 0x170),
- /* Asynchronous reset registers */
- DEFINE_RES_MEM(0xffc00300, 4),
- /* Asynchronous mode registers */
- DEFINE_RES_MEM(0xffc00400, 4),
- /* IRQ for DMA channels */
- DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
-};
-
-static void __init r8a7778_register_hpb_dmae(void)
-{
- platform_device_register_resndata(NULL, "hpb-dma-engine",
- -1, hpb_dmae_resources,
- ARRAY_SIZE(hpb_dmae_resources),
- &dma_platform_data,
- sizeof(dma_platform_data));
-}
-
-void __init r8a7778_add_standard_devices(void)
-{
- r8a7778_add_dt_devices();
- r8a7778_register_tmu(0);
- r8a7778_register_scif(0);
- r8a7778_register_scif(1);
- r8a7778_register_scif(2);
- r8a7778_register_scif(3);
- r8a7778_register_scif(4);
- r8a7778_register_scif(5);
- r8a7778_register_i2c(0);
- r8a7778_register_i2c(1);
- r8a7778_register_i2c(2);
- r8a7778_register_i2c(3);
- r8a7778_register_hspi(0);
- r8a7778_register_hspi(1);
- r8a7778_register_hspi(2);
-
- r8a7778_register_hpb_dmae();
-}
-
-void __init r8a7778_init_late(void)
-{
- shmobile_init_late();
- platform_device_register_full(&ehci_info);
- platform_device_register_full(&ohci_info);
-}
-
-static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
- .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
- .sense_bitfield_width = 2,
-};
-
-static struct resource irqpin_resources[] __initdata = {
- DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
- DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
- DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
- DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
- DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
- DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */
- DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */
- DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */
- DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
-};
-
-void __init r8a7778_init_irq_extpin_dt(int irlm)
-{
- void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
- unsigned long tmp;
-
- if (!icr0) {
- pr_warn("r8a7778: unable to setup external irq pin mode\n");
- return;
- }
-
- tmp = ioread32(icr0);
- if (irlm)
- tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
- else
- tmp &= ~(1 << 23); /* IRL mode - not supported */
- tmp |= (1 << 21); /* LVLMODE = 1 */
- iowrite32(tmp, icr0);
- iounmap(icr0);
-}
-
-void __init r8a7778_init_irq_extpin(int irlm)
-{
- r8a7778_init_irq_extpin_dt(irlm);
- if (irlm)
- platform_device_register_resndata(
- NULL, "renesas_intc_irqpin", -1,
- irqpin_resources, ARRAY_SIZE(irqpin_resources),
- &irqpin_platform_data, sizeof(irqpin_platform_data));
-}
-
-#ifdef CONFIG_USE_OF
#define INT2SMSKCR0 0x82288 /* 0xfe782288 */
#define INT2SMSKCR1 0x8228c /* 0xfe78228c */
void __init r8a7778_init_irq_dt(void)
{
void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
- void __iomem *gic_dist_base = ioremap_nocache(0xfe438000, 0x1000);
- void __iomem *gic_cpu_base = ioremap_nocache(0xfe430000, 0x1000);
-#endif
BUG_ON(!base);
-#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
-#else
irqchip_init();
-#endif
+
/* route all interrupts to ARM */
__raw_writel(0x73ffffff, base + INT2NTSR0);
__raw_writel(0xffffffff, base + INT2NTSR1);
.init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_late = shmobile_init_late,
-#ifdef CONFIG_COMMON_CLK
.init_time = r8a7778_timer_init,
-#endif
.dt_compat = r8a7778_compat_dt,
MACHINE_END
-
-#endif /* CONFIG_USE_OF */
+++ /dev/null
-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-/*
- * FIXME !!
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static inline void __init gpio_direction_none(void __iomem * addr)
-{
- __raw_writeb(0x00, addr);
-}
-
-#endif /* __ASM_ARCH_GPIO_H */
shmobile_setup_delay_hz(max_freq, 2, 4);
}
}
-
-static void __init shmobile_late_time_init(void)
-{
- /*
- * Make sure all compiled-in early timers register themselves.
- *
- * Run probe() for two "earlytimer" devices, these will be the
- * clockevents and clocksource devices respectively. In the event
- * that only a clockevents device is available, we -ENODEV on the
- * clocksource and the jiffies clocksource is used transparently
- * instead. No error handling is necessary here.
- */
- early_platform_driver_register_all("earlytimer");
- early_platform_driver_probe("earlytimer", 2, 0);
-}
-
-void __init shmobile_earlytimer_init(void)
-{
- late_time_init = shmobile_late_time_init;
-}
-
config ARCH_BERLIN
bool "Marvell Berlin SoC Family"
+ select ARCH_REQUIRE_GPIOLIB
select DW_APB_ICTL
help
This enables support for Marvell Berlin SoC Family
help
This enables support for AMD Seattle SOC Family
+config ARCH_STRATIX10
+ bool "Altera's Stratix 10 SoCFPGA Family"
+ help
+ This enables support for Altera's Stratix 10 SoCFPGA Family.
+
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER
+dts-dirs += altera
dts-dirs += amd
dts-dirs += apm
dts-dirs += arm
--- /dev/null
+dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/ {
+ compatible = "altr,socfpga-stratix10";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x1>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x2>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ enable-method = "psci";
+ reg = <0x3>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 120 8>,
+ <0 121 8>,
+ <0 122 8>,
+ <0 123 8>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ intc: intc@fffc1000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0xfffc1000 0x1000>,
+ <0x0 0xfffc2000 0x2000>,
+ <0x0 0xfffc4000 0x2000>,
+ <0x0 0xfffc6000 0x2000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges = <0 0 0 0xffffffff>;
+
+ clkmgr@ffd1000 {
+ compatible = "altr,clk-mgr";
+ reg = <0xffd10000 0x1000>;
+ };
+
+ gmac0: ethernet@ff800000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff800000 0x2000>;
+ interrupts = <0 90 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff802000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff802000 0x2000>;
+ interrupts = <0 91 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gmac2: ethernet@ff804000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ reg = <0xff804000 0x2000>;
+ interrupts = <0 92 4>;
+ interrupt-names = "macirq";
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gpio0: gpio@ffc03200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc03200 0x100>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 110 4>;
+ };
+ };
+
+ gpio1: gpio@ffc03300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc03300 0x100>;
+ status = "disabled";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <24>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 110 4>;
+ };
+ };
+
+ i2c0: i2c@ffc02800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02800 0x100>;
+ interrupts = <0 103 4>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc02900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02900 0x100>;
+ interrupts = <0 104 4>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc02a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02a00 0x100>;
+ interrupts = <0 105 4>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc02b00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02b00 0x100>;
+ interrupts = <0 106 4>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ffc02c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02c00 0x100>;
+ interrupts = <0 107 4>;
+ status = "disabled";
+ };
+
+ mmc: dwmmc0@ff808000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff808000 0x1000>;
+ interrupts = <0 96 4>;
+ fifo-depth = <0x400>;
+ status = "disabled";
+ };
+
+ ocram: sram@ffe00000 {
+ compatible = "mmio-sram";
+ reg = <0xffe00000 0x100000>;
+ };
+
+ rst: rstmgr@ffd11000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd11000 0x1000>;
+ };
+
+ spi0: spi@ffda4000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda4000 0x1000>;
+ interrupts = <0 101 4>;
+ num-chipselect = <4>;
+ bus-num = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ffda5000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xffda5000 0x1000>;
+ interrupts = <0 102 4>;
+ num-chipselect = <4>;
+ bus-num = <0>;
+ status = "disabled";
+ };
+
+ sysmgr: sysmgr@ffd12000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd12000 0x1000>;
+ };
+
+ /* Local timer */
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf01>,
+ <1 14 0xf01>,
+ <1 11 0xf01>,
+ <1 10 0xf01>;
+ };
+
+ timer0: timer0@ffc03000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 113 4>;
+ reg = <0xffc03000 0x100>;
+ };
+
+ timer1: timer1@ffc03100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 114 4>;
+ reg = <0xffc03100 0x100>;
+ };
+
+ timer2: timer2@ffd00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 115 4>;
+ reg = <0xffd00000 0x100>;
+ };
+
+ timer3: timer3@ffd00100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 116 4>;
+ reg = <0xffd00100 0x100>;
+ };
+
+ uart0: serial0@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x100>;
+ interrupts = <0 108 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial1@ffc02100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02100 0x100>;
+ interrupts = <0 109 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ usbphy0: usbphy@0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0x40000>;
+ interrupts = <0 93 4>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0x40000>;
+ interrupts = <0 94 4>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@ffd00200 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00200 0x100>;
+ interrupts = <0 117 4>;
+ status = "disabled";
+ };
+
+ watchdog1: watchdog@ffd00300 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00300 0x100>;
+ interrupts = <0 118 4>;
+ status = "disabled";
+ };
+
+ watchdog2: watchdog@ffd00400 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00400 0x100>;
+ interrupts = <0 125 4>;
+ status = "disabled";
+ };
+
+ watchdog3: watchdog@ffd00500 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00500 0x100>;
+ interrupts = <0 126 4>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) 2015. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/include/ "socfpga_stratix10.dtsi"
+
+/ {
+ model = "SoCFPGA Stratix 10 SoCDK";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
--- /dev/null
+/*
+ * dts file for AppliedMicro (APM) Merlin Board
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-shadowcat.dtsi"
+
+/ {
+ model = "APM X-Gene Merlin board";
+ compatible = "apm,merlin", "apm,xgene-shadowcat";
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ reg = < 0x1 0x00000000 0x0 0x80000000 >;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ button@1 {
+ label = "POWER";
+ linux,code = <116>;
+ linux,input-type = <0x1>;
+ interrupts = <0x0 0x28 0x1>;
+ };
+ };
+
+ poweroff_mbox: poweroff_mbox@10548000 {
+ compatible = "syscon";
+ reg = <0x0 0x10548000 0x0 0x30>;
+ };
+
+ poweroff: poweroff@10548010 {
+ compatible = "syscon-poweroff";
+ regmap = <&poweroff_mbox>;
+ offset = <0x10>;
+ mask = <0x1>;
+ };
+};
+
+&serial0 {
+ status = "ok";
+};
+
+&sata1 {
+ status = "ok";
+};
+
+&sata2 {
+ status = "ok";
+};
+
+&sata3 {
+ status = "ok";
+};
+
+&sgenet0 {
+ status = "ok";
+};
+
+&xgenet1 {
+ status = "ok";
+};
interrupts = <0x0 0x2d 0x1>;
};
};
+
+ poweroff_mbox: poweroff_mbox@10548000 {
+ compatible = "syscon";
+ reg = <0x0 0x10548000 0x0 0x30>;
+ };
+
+ poweroff: poweroff@10548010 {
+ compatible = "syscon-poweroff";
+ regmap = <&poweroff_mbox>;
+ offset = <0x10>;
+ mask = <0x1>;
+ };
};
&pcie0clk {
--- /dev/null
+/*
+ * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC
+ *
+ * Copyright (C) 2015, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+ compatible = "apm,xgene-shadowcat";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@000 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@001 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "apm,strega", "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ };
+
+ gic: interrupt-controller@78090000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-controller;
+ interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
+ ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */
+ reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */
+ <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */
+ <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */
+ <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <1 12 0xff04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 0 0xff04>, /* Secure Phys IRQ */
+ <1 13 0xff04>, /* Non-secure Phys IRQ */
+ <1 14 0xff04>, /* Virt IRQ */
+ <1 15 0xff04>; /* Hyp IRQ */
+ clock-frequency = <50000000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk";
+ };
+
+ socpll: socpll@17000120 {
+ compatible = "apm,xgene-socpll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ reg = <0x0 0x17000120 0x0 0x1000>;
+ clock-output-names = "socpll";
+ };
+
+ socplldiv2: socplldiv2 {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <1>;
+ clocks = <&socpll 0>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ clock-output-names = "socplldiv2";
+ };
+
+ pcie0clk: pcie0clk@1f2bc000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2bc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie0clk";
+ };
+
+ xge0clk: xge0clk@1f61c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f61c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ enable-mask = <0x3>;
+ csr-mask = <0x3>;
+ clock-output-names = "xge0clk";
+ };
+
+ xge1clk: xge1clk@1f62c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f62c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ enable-mask = <0x3>;
+ csr-mask = <0x3>;
+ clock-output-names = "xge1clk";
+ };
+ };
+
+ scu: system-clk-controller@17000000 {
+ compatible = "apm,xgene-scu","syscon";
+ reg = <0x0 0x17000000 0x0 0x400>;
+ };
+
+ reboot: reboot@17000014 {
+ compatible = "syscon-reboot";
+ regmap = <&scu>;
+ offset = <0x14>;
+ mask = <0x1>;
+ };
+
+ serial0: serial@10600000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x10600000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4c 0x4>;
+ };
+
+ sata1: sata@1a000000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a000000 0x0 0x1000>,
+ <0x0 0x1f200000 0x0 0x1000>,
+ <0x0 0x1f20d000 0x0 0x1000>,
+ <0x0 0x1f20e000 0x0 0x1000>;
+ interrupts = <0x0 0x5a 0x4>;
+ dma-coherent;
+ };
+
+ sata2: sata@1a200000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a200000 0x0 0x1000>,
+ <0x0 0x1f210000 0x0 0x1000>,
+ <0x0 0x1f21d000 0x0 0x1000>,
+ <0x0 0x1f21e000 0x0 0x1000>;
+ interrupts = <0x0 0x5b 0x4>;
+ dma-coherent;
+ };
+
+ sata3: sata@1a400000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x1000>,
+ <0x0 0x1f22d000 0x0 0x1000>,
+ <0x0 0x1f22e000 0x0 0x1000>;
+ interrupts = <0x0 0x5c 0x4>;
+ dma-coherent;
+ };
+
+ sbgpio: sbgpio@17001000{
+ compatible = "apm,xgene-gpio-sb";
+ reg = <0x0 0x17001000 0x0 0x400>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <0x0 0x28 0x1>,
+ <0x0 0x29 0x1>,
+ <0x0 0x2a 0x1>,
+ <0x0 0x2b 0x1>,
+ <0x0 0x2c 0x1>,
+ <0x0 0x2d 0x1>,
+ <0x0 0x2e 0x1>,
+ <0x0 0x2f 0x1>;
+ };
+
+ sgenet0: ethernet@1f610000 {
+ compatible = "apm,xgene2-sgenet";
+ status = "disabled";
+ reg = <0x0 0x1f610000 0x0 0x10000>,
+ <0x0 0x1f600000 0x0 0Xd100>,
+ <0x0 0x20000000 0x0 0X20000>;
+ interrupts = <0 96 4>,
+ <0 97 4>;
+ dma-coherent;
+ clocks = <&xge0clk 0>;
+ local-mac-address = [00 01 73 00 00 01];
+ phy-connection-type = "sgmii";
+ };
+
+ xgenet1: ethernet@1f620000 {
+ compatible = "apm,xgene2-xgenet";
+ status = "disabled";
+ reg = <0x0 0x1f620000 0x0 0x10000>,
+ <0x0 0x1f600000 0x0 0Xd100>,
+ <0x0 0x20000000 0x0 0X220000>;
+ interrupts = <0 108 4>,
+ <0 109 4>;
+ port-id = <1>;
+ dma-coherent;
+ clocks = <&xge1clk 0>;
+ local-mac-address = [00 01 73 00 00 02];
+ phy-connection-type = "xgmii";
+ };
+ };
+};
clock-frequency = <50000000>;
};
+ pmu {
+ compatible = "apm,potenza-pmu", "arm,armv8-pmuv3";
+ interrupts = <1 12 0xff04>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
0x0 0x1f 0x4>;
};
+ scu: system-clk-controller@17000000 {
+ compatible = "apm,xgene-scu","syscon";
+ reg = <0x0 0x17000000 0x0 0x400>;
+ };
+
+ reboot: reboot@17000014 {
+ compatible = "syscon-reboot";
+ regmap = <&scu>;
+ offset = <0x14>;
+ mask = <0x1>;
+ };
+
csw: csw@7e200000 {
compatible = "apm,xgene-csw", "syscon";
reg = <0x0 0x7e200000 0x0 0x1000>;
};
};
+ mailbox: mhu@2b1f0000 {
+ compatible = "arm,mhu", "arm,primecell";
+ reg = <0x0 0x2b1f0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mhu_lpri_rx",
+ "mhu_hpri_rx";
+ #mbox-cells = <1>;
+ clocks = <&soc_refclk100mhz>;
+ clock-names = "apb_pclk";
+ };
+
gic: interrupt-controller@2c010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
reg = <0x0 0x2c010000 0 0x1000>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
};
+ sram: sram@2e000000 {
+ compatible = "arm,juno-sram-ns", "mmio-sram";
+ reg = <0x0 0x2e000000 0x0 0x8000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x2e000000 0x8000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x0 0x200>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x200 0x200>;
+ };
+ };
+
+ scpi {
+ compatible = "arm,scpi";
+ mboxes = <&mailbox 1>;
+ shmem = <&cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>, <1>, <2>;
+ clock-output-names = "atlclk", "aplclk","gpuclk";
+ };
+ scpi_clk: scpi_clocks@3 {
+ compatible = "arm,scpi-variable-clocks";
+ #clock-cells = <1>;
+ clock-indices = <3>, <4>;
+ clock-output-names = "pxlclk0", "pxlclk1";
+ };
+ };
+
+ scpi_sensors0: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
/include/ "juno-clocks.dtsi"
dma@7ff00000 {
};
};
+ flash@0,00000000 {
+ /* 2 * 32MiB NOR Flash memory mounted on CS0 */
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ linux,part-probe = "afs";
+ reg = <0 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
ethernet@2,00000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <2 0x00000000 0x10000>;
#address-cells = <2>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A57_0>;
+ };
+ core1 {
+ cpu = <&A57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
A57_0: cpu@0 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A57_1: cpu@1 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A53_0: cpu@100 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_1: cpu@101 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_2: cpu@102 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_3: cpu@103 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A57_L2: l2-cache0 {
#address-cells = <2>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A57_0>;
+ };
+ core1 {
+ cpu = <&A57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
A57_0: cpu@0 {
compatible = "arm,cortex-a57","arm,armv8";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A57_1: cpu@1 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A57_L2>;
+ clocks = <&scpi_dvfs 0>;
};
A53_0: cpu@100 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_1: cpu@101 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_2: cpu@102 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A53_3: cpu@103 {
device_type = "cpu";
enable-method = "psci";
next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
};
A57_L2: l2-cache0 {
<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- /include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi"
+ /include/ "vexpress-v2m-rs1.dtsi"
};
};
--- /dev/null
+../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi
\ No newline at end of file
-dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220";
aliases {
- serial0 = &uart0;
+ serial0 = &uart0; /* On board UART0 */
+ serial1 = &uart1; /* BT UART */
+ serial2 = &uart2; /* LS Expansion UART0 */
+ serial3 = &uart3; /* LS Expansion UART1 */
};
chosen {
- stdout-path = "serial0:115200n8";
+ stdout-path = "serial3:115200n8";
};
memory@0 {
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi6220-clock.h>
/ {
compatible = "hisilicon,hi6220";
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xf8015000 0x0 0x1000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
+ clocks = <&ao_ctrl HI6220_UART0_PCLK>,
+ <&ao_ctrl HI6220_UART0_PCLK>;
clock-names = "uartclk", "apb_pclk";
};
+
+ uart1: uart@f7111000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7111000 0x0 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART1_PCLK>,
+ <&sys_ctrl HI6220_UART1_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: uart@f7112000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7112000 0x0 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART2_PCLK>,
+ <&sys_ctrl HI6220_UART2_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: uart@f7113000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7113000 0x0 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART3_PCLK>,
+ <&sys_ctrl HI6220_UART3_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart4: uart@f7114000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xf7114000 0x0 0x1000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_ctrl HI6220_UART4_PCLK>,
+ <&sys_ctrl HI6220_UART4_PCLK>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
};
};
--- /dev/null
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/dts-v1/;
+
+#include "hip05.dtsi"
+
+/ {
+ model = "Hisilicon Hip05 D02 Development Board";
+ compatible = "hisilicon,hip05-d02";
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x80000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "ok";
+};
--- /dev/null
+/**
+ * dts file for Hisilicon D02 Development Board
+ *
+ * Copyright (C) 2014,2015 Hisilicon Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hip05-d02";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&cpu8>;
+ };
+ core1 {
+ cpu = <&cpu9>;
+ };
+ core2 {
+ cpu = <&cpu10>;
+ };
+ core3 {
+ cpu = <&cpu11>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&cpu12>;
+ };
+ core1 {
+ cpu = <&cpu13>;
+ };
+ core2 {
+ cpu = <&cpu14>;
+ };
+ core3 {
+ cpu = <&cpu15>;
+ };
+ };
+ };
+
+ cpu0: cpu@20000 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20000>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@20001 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20001>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@20002 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20002>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@20003 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20003>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@20100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@20101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@20102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@20103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20103>;
+ enable-method = "psci";
+ };
+
+ cpu8: cpu@20200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20200>;
+ enable-method = "psci";
+ };
+
+ cpu9: cpu@20201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20201>;
+ enable-method = "psci";
+ };
+
+ cpu10: cpu@20202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20202>;
+ enable-method = "psci";
+ };
+
+ cpu11: cpu@20203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20203>;
+ enable-method = "psci";
+ };
+
+ cpu12: cpu@20300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20300>;
+ enable-method = "psci";
+ };
+
+ cpu13: cpu@20301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20301>;
+ enable-method = "psci";
+ };
+
+ cpu14: cpu@20302 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20302>;
+ enable-method = "psci";
+ };
+
+ cpu15: cpu@20303 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x20303>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@8d000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x30000>;
+ reg = <0x0 0x8d000000 0 0x10000>, /* GICD */
+ <0x0 0x8d100000 0 0x300000>, /* GICR */
+ <0x0 0xfe000000 0 0x10000>, /* GICC */
+ <0x0 0xfe010000 0 0x10000>, /* GICH */
+ <0x0 0xfe020000 0 0x10000>; /* GICV */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ its_totems: interrupt-controller@8c000000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x8c000000 0x0 0x40000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ refclk200mhz: refclk200mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ uart0: uart@80300000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x80300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&refclk200mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: uart@80310000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x80310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&refclk200mhz>;
+ clock-names = "apb_pclk";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+ };
+};
dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb
+dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
--- /dev/null
+/*
+ * Copyright (C) 2015 Marvell Technology Group Ltd.
+ *
+ * Author: Jisheng Zhang <jszhang@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "berlin4ct.dtsi"
+
+/ {
+ model = "Marvell BG4CT STB board";
+ compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ /* the first 16MB is for firmwares' usage */
+ reg = <0 0x01000000 0 0x7f000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ apb@e80000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0xe80000 0x10000>;
+ interrupt-parent = <&aic>;
+
+ gpio0: gpio@0400 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0>;
+ };
+ };
+
+ gpio1: gpio@0800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <1>;
+ };
+ };
+
+ gpio2: gpio@0c00 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x0c00 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portc: gpio-port@2 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <2>;
+ };
+ };
+
+ gpio3: gpio@1000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portd: gpio-port@3 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <3>;
+ };
+ };
+
+ aic: interrupt-controller@3800 {
+ compatible = "snps,dw-apb-ictl";
+ reg = <0x3800 0x30>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
};
+ sm_gpio0: gpio@8000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x8000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
+ sm_gpio1: gpio@9000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x9000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
uart0: uart@d000 {
compatible = "snps,dw-apb-uart";
reg = <0xd000 0x100>;
/ {
aliases {
serial0 = &blsp1_uart2;
+ serial1 = &blsp1_uart1;
};
chosen {
pinctrl-1 = <&blsp1_uart2_sleep>;
};
+ i2c@78b6000 {
+ /* On Low speed expansion */
+ status = "okay";
+ };
+
+ i2c@78b8000 {
+ /* On High speed expansion */
+ status = "okay";
+ };
+
+ i2c@78ba000 {
+ /* On Low speed expansion */
+ status = "okay";
+ };
+
+ spi@78b7000 {
+ /* On High speed expansion */
+ status = "okay";
+ };
+
+ spi@78b9000 {
+ /* On Low speed expansion */
+ status = "okay";
+ };
+
leds {
pinctrl-names = "default";
pinctrl-0 = <&msmgpio_leds>,
};
};
};
+
+&sdhc_1 {
+ status = "okay";
+};
&msmgpio {
+ blsp1_uart1_default: blsp1_uart1_default {
+ pinmux {
+ function = "blsp_uart1";
+ pins = "gpio0", "gpio1";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1";
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+
+ blsp1_uart1_sleep: blsp1_uart1_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio0", "gpio1";
+ };
+ pinconf {
+ pins = "gpio0", "gpio1";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
blsp1_uart2_default: blsp1_uart2_default {
pinmux {
function = "blsp_uart2";
blsp1_uart2_sleep: blsp1_uart2_sleep {
pinmux {
- function = "blsp_uart2";
+ function = "gpio";
pins = "gpio4", "gpio5";
};
pinconf {
};
};
+ i2c2_default: i2c2_default {
+ pinmux {
+ function = "blsp_i2c2";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c2_sleep: i2c2_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio6", "gpio7";
+ };
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
i2c4_default: i2c4_default {
pinmux {
function = "blsp_i2c4";
i2c4_sleep: i2c4_sleep {
pinmux {
- function = "blsp_i2c4";
+ function = "gpio";
pins = "gpio14", "gpio15";
};
pinconf {
};
};
+ i2c6_default: i2c6_default {
+ pinmux {
+ function = "blsp_i2c6";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
+ i2c6_sleep: i2c6_sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio22", "gpio23";
+ };
+ pinconf {
+ pins = "gpio22", "gpio23";
+ drive-strength = <2>;
+ bias-disable = <0>;
+ };
+ };
+
sdhc2_cd_pin {
sdc2_cd_on: cd_on {
pinmux {
compatible = "qcom,gcc-msm8916";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0x1800000 0x80000>;
};
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_uart2: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b0000 0x200>;
status = "disabled";
};
+ blsp_i2c2: i2c@78b6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78b6000 0x1000>;
+ interrupts = <GIC_SPI 96 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_default>;
+ pinctrl-1 = <&i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
blsp_i2c4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b8000 0x1000>;
status = "disabled";
};
+ blsp_i2c6: i2c@78ba000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x78ba000 0x1000>;
+ interrupts = <GIC_SPI 100 0>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c6_default>;
+ pinctrl-1 = <&i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sdhc_1: sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
interrupt-controller;
#interrupt-cells = <4>;
};
+
+ rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x00022000 0x200>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
};
};
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_STRATIX10=y
CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_QCOM=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_QUP=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
+CONFIG_SPI_QUP=y
CONFIG_PINCTRL_MSM8916=y
CONFIG_GPIO_PL061=y
CONFIG_GPIO_XGENE=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_EFI=y
CONFIG_RTC_DRV_XGENE=y
+CONFIG_DMADEVICES=y
+CONFIG_QCOM_BAM_DMA=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8916=y
+CONFIG_HWSPINLOCK_QCOM=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
CONFIG_PHY_XGENE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
return -ENOMEM;
}
} else {
- if (IS_ERR(clk) || !__clk_get(clk)) {
+ if (IS_ERR(clk)) {
kfree(ce);
return -ENOENT;
}
* @clk: Clock pointer
*
* Add the clock to the list of clocks used for the power management of @dev.
- * It will increment refcount on clock pointer, use clk_put() on it when done.
+ * The power-management code will take control of the clock reference, so
+ * callers should not call clk_put() on @clk after this function sucessfully
+ * returned.
*/
int pm_clk_add_clk(struct device *dev, struct clk *clk)
{
clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
by control register.
+config COMMON_CLK_SCPI
+ tristate "Clock driver controlled via SCPI interface"
+ depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
+ ---help---
+ This driver provides support for clocks that are controlled
+ by firmware that implements the SCPI interface.
+
+ This driver uses SCPI Message Protocol to interact with the
+ firmware providing all the clock controls.
+
config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
+obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o
obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
#define REG_SDIO0XIN_CLKCTL 0x0158
#define REG_SDIO1XIN_CLKCTL 0x015c
-#define MAX_CLKS 27
+#define MAX_CLKS 28
static struct clk *clks[MAX_CLKS];
static struct clk_onecell_data clk_data;
static DEFINE_SPINLOCK(lock);
gd->bit_idx, 0, &lock);
}
- /*
- * twdclk is derived from cpu/3
- * TODO: use cpupll until cpuclk is not available
- */
+ /* cpuclk divider is fixed to 1 */
+ clks[CLKID_CPU] =
+ clk_register_fixed_factor(NULL, "cpu", clk_names[CPUPLL],
+ 0, 1, 1);
+ /* twdclk is derived from cpu/3 */
clks[CLKID_TWD] =
- clk_register_fixed_factor(NULL, "twd", clk_names[CPUPLL],
- 0, 1, 3);
+ clk_register_fixed_factor(NULL, "twd", "cpu", 0, 1, 3);
/* check for errors on leaf clocks */
for (n = 0; n < MAX_CLKS; n++) {
--- /dev/null
+/*
+ * System Control and Power Interface (SCPI) Protocol based clock driver
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/scpi_protocol.h>
+
+struct scpi_clk {
+ u32 id;
+ struct clk_hw hw;
+ struct scpi_dvfs_info *info;
+ struct scpi_ops *scpi_ops;
+};
+
+#define to_scpi_clk(clk) container_of(clk, struct scpi_clk, hw)
+
+static struct platform_device *cpufreq_dev;
+
+static unsigned long scpi_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+
+ return clk->scpi_ops->clk_get_val(clk->id);
+}
+
+static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ /*
+ * We can't figure out what rate it will be, so just return the
+ * rate back to the caller. scpi_clk_recalc_rate() will be called
+ * after the rate is set and we'll know what rate the clock is
+ * running at then.
+ */
+ return rate;
+}
+
+static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+
+ return clk->scpi_ops->clk_set_val(clk->id, rate);
+}
+
+static const struct clk_ops scpi_clk_ops = {
+ .recalc_rate = scpi_clk_recalc_rate,
+ .round_rate = scpi_clk_round_rate,
+ .set_rate = scpi_clk_set_rate,
+};
+
+/* find closest match to given frequency in OPP table */
+static int __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate)
+{
+ int idx;
+ u32 fmin = 0, fmax = ~0, ftmp;
+ const struct scpi_opp *opp = clk->info->opps;
+
+ for (idx = 0; idx < clk->info->count; idx++, opp++) {
+ ftmp = opp->freq;
+ if (ftmp >= (u32)rate) {
+ if (ftmp <= fmax)
+ fmax = ftmp;
+ break;
+ } else if (ftmp >= fmin) {
+ fmin = ftmp;
+ }
+ }
+ return fmax != ~0 ? fmax : fmin;
+}
+
+static unsigned long scpi_dvfs_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+ int idx = clk->scpi_ops->dvfs_get_idx(clk->id);
+ const struct scpi_opp *opp;
+
+ if (idx < 0)
+ return 0;
+
+ opp = clk->info->opps + idx;
+ return opp->freq;
+}
+
+static long scpi_dvfs_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+
+ return __scpi_dvfs_round_rate(clk, rate);
+}
+
+static int __scpi_find_dvfs_index(struct scpi_clk *clk, unsigned long rate)
+{
+ int idx, max_opp = clk->info->count;
+ const struct scpi_opp *opp = clk->info->opps;
+
+ for (idx = 0; idx < max_opp; idx++, opp++)
+ if (opp->freq == rate)
+ return idx;
+ return -EINVAL;
+}
+
+static int scpi_dvfs_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct scpi_clk *clk = to_scpi_clk(hw);
+ int ret = __scpi_find_dvfs_index(clk, rate);
+
+ if (ret < 0)
+ return ret;
+ return clk->scpi_ops->dvfs_set_idx(clk->id, (u8)ret);
+}
+
+static const struct clk_ops scpi_dvfs_ops = {
+ .recalc_rate = scpi_dvfs_recalc_rate,
+ .round_rate = scpi_dvfs_round_rate,
+ .set_rate = scpi_dvfs_set_rate,
+};
+
+static const struct of_device_id scpi_clk_match[] = {
+ { .compatible = "arm,scpi-dvfs-clocks", .data = &scpi_dvfs_ops, },
+ { .compatible = "arm,scpi-variable-clocks", .data = &scpi_clk_ops, },
+ {}
+};
+
+static struct clk *
+scpi_clk_ops_init(struct device *dev, const struct of_device_id *match,
+ struct scpi_clk *sclk, const char *name)
+{
+ struct clk_init_data init;
+ struct clk *clk;
+ unsigned long min = 0, max = 0;
+
+ init.name = name;
+ init.flags = CLK_IS_ROOT;
+ init.num_parents = 0;
+ init.ops = match->data;
+ sclk->hw.init = &init;
+ sclk->scpi_ops = get_scpi_ops();
+
+ if (init.ops == &scpi_dvfs_ops) {
+ sclk->info = sclk->scpi_ops->dvfs_get_info(sclk->id);
+ if (IS_ERR(sclk->info))
+ return NULL;
+ } else if (init.ops == &scpi_clk_ops) {
+ if (sclk->scpi_ops->clk_get_range(sclk->id, &min, &max) || !max)
+ return NULL;
+ } else {
+ return NULL;
+ }
+
+ clk = devm_clk_register(dev, &sclk->hw);
+ if (!IS_ERR(clk) && max)
+ clk_hw_set_rate_range(&sclk->hw, min, max);
+ return clk;
+}
+
+struct scpi_clk_data {
+ struct scpi_clk **clk;
+ unsigned int clk_num;
+};
+
+static struct clk *
+scpi_of_clk_src_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct scpi_clk *sclk;
+ struct scpi_clk_data *clk_data = data;
+ unsigned int idx = clkspec->args[0], count;
+
+ for (count = 0; count < clk_data->clk_num; count++) {
+ sclk = clk_data->clk[count];
+ if (idx == sclk->id)
+ return sclk->hw.clk;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+static int scpi_clk_add(struct device *dev, struct device_node *np,
+ const struct of_device_id *match)
+{
+ struct clk **clks;
+ int idx, count;
+ struct scpi_clk_data *clk_data;
+
+ count = of_property_count_strings(np, "clock-output-names");
+ if (count < 0) {
+ dev_err(dev, "%s: invalid clock output count\n", np->name);
+ return -EINVAL;
+ }
+
+ clk_data = devm_kmalloc(dev, sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ clk_data->clk_num = count;
+ clk_data->clk = devm_kcalloc(dev, count, sizeof(*clk_data->clk),
+ GFP_KERNEL);
+ if (!clk_data->clk)
+ return -ENOMEM;
+
+ clks = devm_kcalloc(dev, count, sizeof(*clks), GFP_KERNEL);
+ if (!clks)
+ return -ENOMEM;
+
+ for (idx = 0; idx < count; idx++) {
+ struct scpi_clk *sclk;
+ const char *name;
+ u32 val;
+
+ sclk = devm_kzalloc(dev, sizeof(*sclk), GFP_KERNEL);
+ if (!sclk)
+ return -ENOMEM;
+
+ if (of_property_read_string_index(np, "clock-output-names",
+ idx, &name)) {
+ dev_err(dev, "invalid clock name @ %s\n", np->name);
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_index(np, "clock-indices",
+ idx, &val)) {
+ dev_err(dev, "invalid clock index @ %s\n", np->name);
+ return -EINVAL;
+ }
+
+ sclk->id = val;
+
+ clks[idx] = scpi_clk_ops_init(dev, match, sclk, name);
+ if (IS_ERR_OR_NULL(clks[idx]))
+ dev_err(dev, "failed to register clock '%s'\n", name);
+ else
+ dev_dbg(dev, "Registered clock '%s'\n", name);
+ clk_data->clk[idx] = sclk;
+ }
+
+ return of_clk_add_provider(np, scpi_of_clk_src_get, clk_data);
+}
+
+static int scpi_clocks_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *child, *np = dev->of_node;
+
+ if (cpufreq_dev) {
+ platform_device_unregister(cpufreq_dev);
+ cpufreq_dev = NULL;
+ }
+
+ for_each_available_child_of_node(np, child)
+ of_clk_del_provider(np);
+ return 0;
+}
+
+static int scpi_clocks_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev = &pdev->dev;
+ struct device_node *child, *np = dev->of_node;
+ const struct of_device_id *match;
+
+ if (!get_scpi_ops())
+ return -ENXIO;
+
+ for_each_available_child_of_node(np, child) {
+ match = of_match_node(scpi_clk_match, child);
+ if (!match)
+ continue;
+ ret = scpi_clk_add(dev, child, match);
+ if (ret) {
+ scpi_clocks_remove(pdev);
+ return ret;
+ }
+ }
+ /* Add the virtual cpufreq device */
+ cpufreq_dev = platform_device_register_simple("scpi-cpufreq",
+ -1, NULL, 0);
+ if (!cpufreq_dev)
+ pr_warn("unable to register cpufreq device");
+
+ return 0;
+}
+
+static const struct of_device_id scpi_clocks_ids[] = {
+ { .compatible = "arm,scpi-clocks", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, scpi_clocks_ids);
+
+static struct platform_driver scpi_clocks_driver = {
+ .driver = {
+ .name = "scpi_clocks",
+ .of_match_table = scpi_clocks_ids,
+ },
+ .probe = scpi_clocks_probe,
+ .remove = scpi_clocks_remove,
+};
+module_platform_driver(scpi_clocks_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI clock driver");
+MODULE_LICENSE("GPL v2");
"renesas,cpg-mstp-clocks"))
goto found;
+ /* BSC on r8a73a4/sh73a0 uses zb_clk instead of an mstp clock */
+ if (!strcmp(clkspec.np->name, "zb_clk"))
+ goto found;
+
of_node_put(clkspec.np);
i++;
}
struct clk *t2_clk = tc->clk[2];
int irq = tc->irq[2];
+ ret = clk_prepare_enable(tc->slow_clk);
+ if (ret)
+ return ret;
+
/* try to enable t2 clk to avoid future errors in mode change */
ret = clk_prepare_enable(t2_clk);
- if (ret)
+ if (ret) {
+ clk_disable_unprepare(tc->slow_clk);
return ret;
+ }
+
clk_disable(t2_clk);
clkevt.regs = tc->regs;
ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt);
if (ret) {
- clk_disable_unprepare(t2_clk);
+ clk_unprepare(t2_clk);
+ clk_disable_unprepare(tc->slow_clk);
return ret;
}
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/export.h>
#include <linux/mfd/syscon.h>
static u32 irqmask;
static struct clock_event_device clkevt;
static struct regmap *regmap_st;
-
-#define AT91_SLOW_CLOCK 32768
-#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ)
+static int timer_latch;
/*
* The ST_CRTR is updated asynchronously to the master clock ... but
if (sr & AT91_ST_PITS) {
u32 crtr = read_CRTR();
- while (((crtr - last_crtr) & AT91_ST_CRTV) >= RM9200_TIMER_LATCH) {
- last_crtr += RM9200_TIMER_LATCH;
+ while (((crtr - last_crtr) & AT91_ST_CRTV) >= timer_latch) {
+ last_crtr += timer_latch;
clkevt.event_handler(&clkevt);
}
return IRQ_HANDLED;
/* PIT for periodic irqs; fixed rate of 1/HZ */
irqmask = AT91_ST_PITS;
- regmap_write(regmap_st, AT91_ST_PIMR, RM9200_TIMER_LATCH);
+ regmap_write(regmap_st, AT91_ST_PIMR, timer_latch);
regmap_write(regmap_st, AT91_ST_IER, irqmask);
return 0;
}
*/
static void __init atmel_st_timer_init(struct device_node *node)
{
- unsigned int val;
+ struct clk *sclk;
+ unsigned int sclk_rate, val;
int irq, ret;
regmap_st = syscon_node_to_regmap(node);
if (ret)
panic(pr_fmt("Unable to setup IRQ\n"));
+ sclk = of_clk_get(node, 0);
+ if (IS_ERR(sclk))
+ panic(pr_fmt("Unable to get slow clock\n"));
+
+ clk_prepare_enable(sclk);
+ if (ret)
+ panic(pr_fmt("Could not enable slow clock\n"));
+
+ sclk_rate = clk_get_rate(sclk);
+ if (!sclk_rate)
+ panic(pr_fmt("Invalid slow clock rate\n"));
+ timer_latch = (sclk_rate + HZ / 2) / HZ;
+
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting
* its prescaler from the 1 Hz default.
/* Setup timer clockevent, with minimum of two ticks (important!!) */
clkevt.cpumask = cpumask_of(0);
- clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+ clockevents_config_and_register(&clkevt, sclk_rate,
2, AT91_ST_ALMV);
/* register clocksource */
- clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
+ clocksource_register_hz(&clk32k, sclk_rate);
}
CLOCKSOURCE_OF_DECLARE(atmel_st_timer, "atmel,at91rm9200-st",
atmel_st_timer_init);
config ARM_SA1110_CPUFREQ
bool
+config ARM_SCPI_CPUFREQ
+ tristate "SCPI based CPUfreq driver"
+ depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL
+ help
+ This adds the CPUfreq driver support for ARM big.LITTLE platforms
+ using SCPI protocol for CPU power management.
+
+ This driver uses SCPI Message Protocol driver to interact with the
+ firmware providing the CPU DVFS functionality.
+
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SA1100_CPUFREQ) += sa1100-cpufreq.o
obj-$(CONFIG_ARM_SA1110_CPUFREQ) += sa1110-cpufreq.o
+obj-$(CONFIG_ARM_SCPI_CPUFREQ) += scpi-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
obj-$(CONFIG_ARM_TEGRA20_CPUFREQ) += tegra20-cpufreq.o
obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
--- /dev/null
+/*
+ * System Control and Power Interface (SCPI) based CPUFreq Interface driver
+ *
+ * It provides necessary ops to arm_big_little cpufreq driver.
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Sudeep Holla <sudeep.holla@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/scpi_protocol.h>
+#include <linux/types.h>
+
+#include "arm_big_little.h"
+
+static struct scpi_ops *scpi_ops;
+
+static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev)
+{
+ u8 domain = topology_physical_package_id(cpu_dev->id);
+
+ if (domain < 0)
+ return ERR_PTR(-EINVAL);
+ return scpi_ops->dvfs_get_info(domain);
+}
+
+static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
+{
+ int idx, ret = 0;
+ struct scpi_opp *opp;
+ struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
+
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ if (!info->opps)
+ return -EIO;
+
+ for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
+ if (remove)
+ dev_pm_opp_remove(cpu_dev, opp->freq);
+ else
+ ret = dev_pm_opp_add(cpu_dev, opp->freq,
+ opp->m_volt * 1000);
+ if (ret) {
+ dev_warn(cpu_dev, "failed to add opp %uHz %umV\n",
+ opp->freq, opp->m_volt);
+ while (idx-- > 0)
+ dev_pm_opp_remove(cpu_dev, (--opp)->freq);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+static int scpi_get_transition_latency(struct device *cpu_dev)
+{
+ struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
+
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+ return info->latency;
+}
+
+static int scpi_init_opp_table(struct device *cpu_dev)
+{
+ return scpi_opp_table_ops(cpu_dev, false);
+}
+
+static void scpi_free_opp_table(struct device *cpu_dev)
+{
+ scpi_opp_table_ops(cpu_dev, true);
+}
+
+static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
+ .name = "scpi",
+ .get_transition_latency = scpi_get_transition_latency,
+ .init_opp_table = scpi_init_opp_table,
+ .free_opp_table = scpi_free_opp_table,
+};
+
+static int scpi_cpufreq_probe(struct platform_device *pdev)
+{
+ scpi_ops = get_scpi_ops();
+ if (!scpi_ops)
+ return -EIO;
+
+ return bL_cpufreq_register(&scpi_cpufreq_ops);
+}
+
+static int scpi_cpufreq_remove(struct platform_device *pdev)
+{
+ bL_cpufreq_unregister(&scpi_cpufreq_ops);
+ scpi_ops = NULL;
+ return 0;
+}
+
+static struct platform_driver scpi_cpufreq_platdrv = {
+ .driver = {
+ .name = "scpi-cpufreq",
+ .owner = THIS_MODULE,
+ },
+ .probe = scpi_cpufreq_probe,
+ .remove = scpi_cpufreq_remove,
+};
+module_platform_driver(scpi_cpufreq_platdrv);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver");
+MODULE_LICENSE("GPL v2");
config ARM_PSCI_FW
bool
+config ARM_SCPI_PROTOCOL
+ tristate "ARM System Control and Power Interface (SCPI) Message Protocol"
+ depends on ARM_MHU
+ help
+ System Control and Power Interface (SCPI) Message Protocol is
+ defined for the purpose of communication between the Application
+ Cores(AP) and the System Control Processor(SCP). The MHU peripheral
+ provides a mechanism for inter-processor communication between SCP
+ and AP.
+
+ SCP controls most of the power managament on the Application
+ Processors. It offers control and management of: the core/cluster
+ power states, various power domain DVFS including the core/cluster,
+ certain system clocks configuration, thermal sensors and many
+ others.
+
+ This protocol library provides interface for all the client drivers
+ making use of the features offered by the SCP.
+
config EDD
tristate "BIOS Enhanced Disk Drive calls determine boot disk"
depends on X86
# Makefile for the linux kernel.
#
obj-$(CONFIG_ARM_PSCI_FW) += psci.o
+obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o
obj-$(CONFIG_DMI) += dmi_scan.o
obj-$(CONFIG_DMI_SYSFS) += dmi-sysfs.o
obj-$(CONFIG_EDD) += edd.o
obj-$(CONFIG_QCOM_SCM) += qcom_scm.o
obj-$(CONFIG_QCOM_SCM_64) += qcom_scm-64.o
obj-$(CONFIG_QCOM_SCM_32) += qcom_scm-32.o
-CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
obj-y += broadcom/
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
--- /dev/null
+/*
+ * System Control and Power Interface (SCPI) Message Protocol driver
+ *
+ * SCPI Message Protocol is used between the System Control Processor(SCP)
+ * and the Application Processors(AP). The Message Handling Unit(MHU)
+ * provides a mechanism for inter-processor communication between SCP's
+ * Cortex M3 and AP.
+ *
+ * SCP offers control and management of the core/cluster power states,
+ * various power domain DVFS including the core/cluster, certain system
+ * clocks configuration, thermal sensors and many others.
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/printk.h>
+#include <linux/scpi_protocol.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/spinlock.h>
+
+#define CMD_ID_SHIFT 0
+#define CMD_ID_MASK 0x7f
+#define CMD_TOKEN_ID_SHIFT 8
+#define CMD_TOKEN_ID_MASK 0xff
+#define CMD_DATA_SIZE_SHIFT 16
+#define CMD_DATA_SIZE_MASK 0x1ff
+#define PACK_SCPI_CMD(cmd_id, tx_sz) \
+ ((((cmd_id) & CMD_ID_MASK) << CMD_ID_SHIFT) | \
+ (((tx_sz) & CMD_DATA_SIZE_MASK) << CMD_DATA_SIZE_SHIFT))
+#define ADD_SCPI_TOKEN(cmd, token) \
+ ((cmd) |= (((token) & CMD_TOKEN_ID_MASK) << CMD_TOKEN_ID_SHIFT))
+
+#define CMD_SIZE(cmd) (((cmd) >> CMD_DATA_SIZE_SHIFT) & CMD_DATA_SIZE_MASK)
+#define CMD_UNIQ_MASK (CMD_TOKEN_ID_MASK << CMD_TOKEN_ID_SHIFT | CMD_ID_MASK)
+#define CMD_XTRACT_UNIQ(cmd) ((cmd) & CMD_UNIQ_MASK)
+
+#define SCPI_SLOT 0
+
+#define MAX_DVFS_DOMAINS 8
+#define MAX_DVFS_OPPS 8
+#define DVFS_LATENCY(hdr) (le32_to_cpu(hdr) >> 16)
+#define DVFS_OPP_COUNT(hdr) ((le32_to_cpu(hdr) >> 8) & 0xff)
+
+#define PROTOCOL_REV_MINOR_BITS 16
+#define PROTOCOL_REV_MINOR_MASK ((1U << PROTOCOL_REV_MINOR_BITS) - 1)
+#define PROTOCOL_REV_MAJOR(x) ((x) >> PROTOCOL_REV_MINOR_BITS)
+#define PROTOCOL_REV_MINOR(x) ((x) & PROTOCOL_REV_MINOR_MASK)
+
+#define FW_REV_MAJOR_BITS 24
+#define FW_REV_MINOR_BITS 16
+#define FW_REV_PATCH_MASK ((1U << FW_REV_MINOR_BITS) - 1)
+#define FW_REV_MINOR_MASK ((1U << FW_REV_MAJOR_BITS) - 1)
+#define FW_REV_MAJOR(x) ((x) >> FW_REV_MAJOR_BITS)
+#define FW_REV_MINOR(x) (((x) & FW_REV_MINOR_MASK) >> FW_REV_MINOR_BITS)
+#define FW_REV_PATCH(x) ((x) & FW_REV_PATCH_MASK)
+
+#define MAX_RX_TIMEOUT (msecs_to_jiffies(20))
+
+enum scpi_error_codes {
+ SCPI_SUCCESS = 0, /* Success */
+ SCPI_ERR_PARAM = 1, /* Invalid parameter(s) */
+ SCPI_ERR_ALIGN = 2, /* Invalid alignment */
+ SCPI_ERR_SIZE = 3, /* Invalid size */
+ SCPI_ERR_HANDLER = 4, /* Invalid handler/callback */
+ SCPI_ERR_ACCESS = 5, /* Invalid access/permission denied */
+ SCPI_ERR_RANGE = 6, /* Value out of range */
+ SCPI_ERR_TIMEOUT = 7, /* Timeout has occurred */
+ SCPI_ERR_NOMEM = 8, /* Invalid memory area or pointer */
+ SCPI_ERR_PWRSTATE = 9, /* Invalid power state */
+ SCPI_ERR_SUPPORT = 10, /* Not supported or disabled */
+ SCPI_ERR_DEVICE = 11, /* Device error */
+ SCPI_ERR_BUSY = 12, /* Device busy */
+ SCPI_ERR_MAX
+};
+
+enum scpi_std_cmd {
+ SCPI_CMD_INVALID = 0x00,
+ SCPI_CMD_SCPI_READY = 0x01,
+ SCPI_CMD_SCPI_CAPABILITIES = 0x02,
+ SCPI_CMD_SET_CSS_PWR_STATE = 0x03,
+ SCPI_CMD_GET_CSS_PWR_STATE = 0x04,
+ SCPI_CMD_SET_SYS_PWR_STATE = 0x05,
+ SCPI_CMD_SET_CPU_TIMER = 0x06,
+ SCPI_CMD_CANCEL_CPU_TIMER = 0x07,
+ SCPI_CMD_DVFS_CAPABILITIES = 0x08,
+ SCPI_CMD_GET_DVFS_INFO = 0x09,
+ SCPI_CMD_SET_DVFS = 0x0a,
+ SCPI_CMD_GET_DVFS = 0x0b,
+ SCPI_CMD_GET_DVFS_STAT = 0x0c,
+ SCPI_CMD_CLOCK_CAPABILITIES = 0x0d,
+ SCPI_CMD_GET_CLOCK_INFO = 0x0e,
+ SCPI_CMD_SET_CLOCK_VALUE = 0x0f,
+ SCPI_CMD_GET_CLOCK_VALUE = 0x10,
+ SCPI_CMD_PSU_CAPABILITIES = 0x11,
+ SCPI_CMD_GET_PSU_INFO = 0x12,
+ SCPI_CMD_SET_PSU = 0x13,
+ SCPI_CMD_GET_PSU = 0x14,
+ SCPI_CMD_SENSOR_CAPABILITIES = 0x15,
+ SCPI_CMD_SENSOR_INFO = 0x16,
+ SCPI_CMD_SENSOR_VALUE = 0x17,
+ SCPI_CMD_SENSOR_CFG_PERIODIC = 0x18,
+ SCPI_CMD_SENSOR_CFG_BOUNDS = 0x19,
+ SCPI_CMD_SENSOR_ASYNC_VALUE = 0x1a,
+ SCPI_CMD_SET_DEVICE_PWR_STATE = 0x1b,
+ SCPI_CMD_GET_DEVICE_PWR_STATE = 0x1c,
+ SCPI_CMD_COUNT
+};
+
+struct scpi_xfer {
+ u32 slot; /* has to be first element */
+ u32 cmd;
+ u32 status;
+ const void *tx_buf;
+ void *rx_buf;
+ unsigned int tx_len;
+ unsigned int rx_len;
+ struct list_head node;
+ struct completion done;
+};
+
+struct scpi_chan {
+ struct mbox_client cl;
+ struct mbox_chan *chan;
+ void __iomem *tx_payload;
+ void __iomem *rx_payload;
+ struct list_head rx_pending;
+ struct list_head xfers_list;
+ struct scpi_xfer *xfers;
+ spinlock_t rx_lock; /* locking for the rx pending list */
+ struct mutex xfers_lock;
+ u8 token;
+};
+
+struct scpi_drvinfo {
+ u32 protocol_version;
+ u32 firmware_version;
+ int num_chans;
+ atomic_t next_chan;
+ struct scpi_ops *scpi_ops;
+ struct scpi_chan *channels;
+ struct scpi_dvfs_info *dvfs[MAX_DVFS_DOMAINS];
+};
+
+/*
+ * The SCP firmware only executes in little-endian mode, so any buffers
+ * shared through SCPI should have their contents converted to little-endian
+ */
+struct scpi_shared_mem {
+ __le32 command;
+ __le32 status;
+ u8 payload[0];
+} __packed;
+
+struct scp_capabilities {
+ __le32 protocol_version;
+ __le32 event_version;
+ __le32 platform_version;
+ __le32 commands[4];
+} __packed;
+
+struct clk_get_info {
+ __le16 id;
+ __le16 flags;
+ __le32 min_rate;
+ __le32 max_rate;
+ u8 name[20];
+} __packed;
+
+struct clk_get_value {
+ __le32 rate;
+} __packed;
+
+struct clk_set_value {
+ __le16 id;
+ __le16 reserved;
+ __le32 rate;
+} __packed;
+
+struct dvfs_info {
+ __le32 header;
+ struct {
+ __le32 freq;
+ __le32 m_volt;
+ } opps[MAX_DVFS_OPPS];
+} __packed;
+
+struct dvfs_get {
+ u8 index;
+} __packed;
+
+struct dvfs_set {
+ u8 domain;
+ u8 index;
+} __packed;
+
+struct sensor_capabilities {
+ __le16 sensors;
+} __packed;
+
+struct _scpi_sensor_info {
+ __le16 sensor_id;
+ u8 class;
+ u8 trigger_type;
+ char name[20];
+};
+
+struct sensor_value {
+ __le32 val;
+} __packed;
+
+static struct scpi_drvinfo *scpi_info;
+
+static int scpi_linux_errmap[SCPI_ERR_MAX] = {
+ /* better than switch case as long as return value is continuous */
+ 0, /* SCPI_SUCCESS */
+ -EINVAL, /* SCPI_ERR_PARAM */
+ -ENOEXEC, /* SCPI_ERR_ALIGN */
+ -EMSGSIZE, /* SCPI_ERR_SIZE */
+ -EINVAL, /* SCPI_ERR_HANDLER */
+ -EACCES, /* SCPI_ERR_ACCESS */
+ -ERANGE, /* SCPI_ERR_RANGE */
+ -ETIMEDOUT, /* SCPI_ERR_TIMEOUT */
+ -ENOMEM, /* SCPI_ERR_NOMEM */
+ -EINVAL, /* SCPI_ERR_PWRSTATE */
+ -EOPNOTSUPP, /* SCPI_ERR_SUPPORT */
+ -EIO, /* SCPI_ERR_DEVICE */
+ -EBUSY, /* SCPI_ERR_BUSY */
+};
+
+static inline int scpi_to_linux_errno(int errno)
+{
+ if (errno >= SCPI_SUCCESS && errno < SCPI_ERR_MAX)
+ return scpi_linux_errmap[errno];
+ return -EIO;
+}
+
+static void scpi_process_cmd(struct scpi_chan *ch, u32 cmd)
+{
+ unsigned long flags;
+ struct scpi_xfer *t, *match = NULL;
+
+ spin_lock_irqsave(&ch->rx_lock, flags);
+ if (list_empty(&ch->rx_pending)) {
+ spin_unlock_irqrestore(&ch->rx_lock, flags);
+ return;
+ }
+
+ list_for_each_entry(t, &ch->rx_pending, node)
+ if (CMD_XTRACT_UNIQ(t->cmd) == CMD_XTRACT_UNIQ(cmd)) {
+ list_del(&t->node);
+ match = t;
+ break;
+ }
+ /* check if wait_for_completion is in progress or timed-out */
+ if (match && !completion_done(&match->done)) {
+ struct scpi_shared_mem *mem = ch->rx_payload;
+ unsigned int len = min(match->rx_len, CMD_SIZE(cmd));
+
+ match->status = le32_to_cpu(mem->status);
+ memcpy_fromio(match->rx_buf, mem->payload, len);
+ if (match->rx_len > len)
+ memset(match->rx_buf + len, 0, match->rx_len - len);
+ complete(&match->done);
+ }
+ spin_unlock_irqrestore(&ch->rx_lock, flags);
+}
+
+static void scpi_handle_remote_msg(struct mbox_client *c, void *msg)
+{
+ struct scpi_chan *ch = container_of(c, struct scpi_chan, cl);
+ struct scpi_shared_mem *mem = ch->rx_payload;
+ u32 cmd = le32_to_cpu(mem->command);
+
+ scpi_process_cmd(ch, cmd);
+}
+
+static void scpi_tx_prepare(struct mbox_client *c, void *msg)
+{
+ unsigned long flags;
+ struct scpi_xfer *t = msg;
+ struct scpi_chan *ch = container_of(c, struct scpi_chan, cl);
+ struct scpi_shared_mem *mem = (struct scpi_shared_mem *)ch->tx_payload;
+
+ if (t->tx_buf)
+ memcpy_toio(mem->payload, t->tx_buf, t->tx_len);
+ if (t->rx_buf) {
+ if (!(++ch->token))
+ ++ch->token;
+ ADD_SCPI_TOKEN(t->cmd, ch->token);
+ spin_lock_irqsave(&ch->rx_lock, flags);
+ list_add_tail(&t->node, &ch->rx_pending);
+ spin_unlock_irqrestore(&ch->rx_lock, flags);
+ }
+ mem->command = cpu_to_le32(t->cmd);
+}
+
+static struct scpi_xfer *get_scpi_xfer(struct scpi_chan *ch)
+{
+ struct scpi_xfer *t;
+
+ mutex_lock(&ch->xfers_lock);
+ if (list_empty(&ch->xfers_list)) {
+ mutex_unlock(&ch->xfers_lock);
+ return NULL;
+ }
+ t = list_first_entry(&ch->xfers_list, struct scpi_xfer, node);
+ list_del(&t->node);
+ mutex_unlock(&ch->xfers_lock);
+ return t;
+}
+
+static void put_scpi_xfer(struct scpi_xfer *t, struct scpi_chan *ch)
+{
+ mutex_lock(&ch->xfers_lock);
+ list_add_tail(&t->node, &ch->xfers_list);
+ mutex_unlock(&ch->xfers_lock);
+}
+
+static int scpi_send_message(u8 cmd, void *tx_buf, unsigned int tx_len,
+ void *rx_buf, unsigned int rx_len)
+{
+ int ret;
+ u8 chan;
+ struct scpi_xfer *msg;
+ struct scpi_chan *scpi_chan;
+
+ chan = atomic_inc_return(&scpi_info->next_chan) % scpi_info->num_chans;
+ scpi_chan = scpi_info->channels + chan;
+
+ msg = get_scpi_xfer(scpi_chan);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->slot = BIT(SCPI_SLOT);
+ msg->cmd = PACK_SCPI_CMD(cmd, tx_len);
+ msg->tx_buf = tx_buf;
+ msg->tx_len = tx_len;
+ msg->rx_buf = rx_buf;
+ msg->rx_len = rx_len;
+ init_completion(&msg->done);
+
+ ret = mbox_send_message(scpi_chan->chan, msg);
+ if (ret < 0 || !rx_buf)
+ goto out;
+
+ if (!wait_for_completion_timeout(&msg->done, MAX_RX_TIMEOUT))
+ ret = -ETIMEDOUT;
+ else
+ /* first status word */
+ ret = le32_to_cpu(msg->status);
+out:
+ if (ret < 0 && rx_buf) /* remove entry from the list if timed-out */
+ scpi_process_cmd(scpi_chan, msg->cmd);
+
+ put_scpi_xfer(msg, scpi_chan);
+ /* SCPI error codes > 0, translate them to Linux scale*/
+ return ret > 0 ? scpi_to_linux_errno(ret) : ret;
+}
+
+static u32 scpi_get_version(void)
+{
+ return scpi_info->protocol_version;
+}
+
+static int
+scpi_clk_get_range(u16 clk_id, unsigned long *min, unsigned long *max)
+{
+ int ret;
+ struct clk_get_info clk;
+ __le16 le_clk_id = cpu_to_le16(clk_id);
+
+ ret = scpi_send_message(SCPI_CMD_GET_CLOCK_INFO, &le_clk_id,
+ sizeof(le_clk_id), &clk, sizeof(clk));
+ if (!ret) {
+ *min = le32_to_cpu(clk.min_rate);
+ *max = le32_to_cpu(clk.max_rate);
+ }
+ return ret;
+}
+
+static unsigned long scpi_clk_get_val(u16 clk_id)
+{
+ int ret;
+ struct clk_get_value clk;
+ __le16 le_clk_id = cpu_to_le16(clk_id);
+
+ ret = scpi_send_message(SCPI_CMD_GET_CLOCK_VALUE, &le_clk_id,
+ sizeof(le_clk_id), &clk, sizeof(clk));
+ return ret ? ret : le32_to_cpu(clk.rate);
+}
+
+static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
+{
+ int stat;
+ struct clk_set_value clk = {
+ .id = cpu_to_le16(clk_id),
+ .rate = cpu_to_le32(rate)
+ };
+
+ return scpi_send_message(SCPI_CMD_SET_CLOCK_VALUE, &clk, sizeof(clk),
+ &stat, sizeof(stat));
+}
+
+static int scpi_dvfs_get_idx(u8 domain)
+{
+ int ret;
+ struct dvfs_get dvfs;
+
+ ret = scpi_send_message(SCPI_CMD_GET_DVFS, &domain, sizeof(domain),
+ &dvfs, sizeof(dvfs));
+ return ret ? ret : dvfs.index;
+}
+
+static int scpi_dvfs_set_idx(u8 domain, u8 index)
+{
+ int stat;
+ struct dvfs_set dvfs = {domain, index};
+
+ return scpi_send_message(SCPI_CMD_SET_DVFS, &dvfs, sizeof(dvfs),
+ &stat, sizeof(stat));
+}
+
+static int opp_cmp_func(const void *opp1, const void *opp2)
+{
+ const struct scpi_opp *t1 = opp1, *t2 = opp2;
+
+ return t1->freq - t2->freq;
+}
+
+static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain)
+{
+ struct scpi_dvfs_info *info;
+ struct scpi_opp *opp;
+ struct dvfs_info buf;
+ int ret, i;
+
+ if (domain >= MAX_DVFS_DOMAINS)
+ return ERR_PTR(-EINVAL);
+
+ if (scpi_info->dvfs[domain]) /* data already populated */
+ return scpi_info->dvfs[domain];
+
+ ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO, &domain, sizeof(domain),
+ &buf, sizeof(buf));
+
+ if (ret)
+ return ERR_PTR(ret);
+
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return ERR_PTR(-ENOMEM);
+
+ info->count = DVFS_OPP_COUNT(buf.header);
+ info->latency = DVFS_LATENCY(buf.header) * 1000; /* uS to nS */
+
+ info->opps = kcalloc(info->count, sizeof(*opp), GFP_KERNEL);
+ if (!info->opps) {
+ kfree(info);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ for (i = 0, opp = info->opps; i < info->count; i++, opp++) {
+ opp->freq = le32_to_cpu(buf.opps[i].freq);
+ opp->m_volt = le32_to_cpu(buf.opps[i].m_volt);
+ }
+
+ sort(info->opps, info->count, sizeof(*opp), opp_cmp_func, NULL);
+
+ scpi_info->dvfs[domain] = info;
+ return info;
+}
+
+static int scpi_sensor_get_capability(u16 *sensors)
+{
+ struct sensor_capabilities cap_buf;
+ int ret;
+
+ ret = scpi_send_message(SCPI_CMD_SENSOR_CAPABILITIES, NULL, 0, &cap_buf,
+ sizeof(cap_buf));
+ if (!ret)
+ *sensors = le16_to_cpu(cap_buf.sensors);
+
+ return ret;
+}
+
+static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info)
+{
+ __le16 id = cpu_to_le16(sensor_id);
+ struct _scpi_sensor_info _info;
+ int ret;
+
+ ret = scpi_send_message(SCPI_CMD_SENSOR_INFO, &id, sizeof(id),
+ &_info, sizeof(_info));
+ if (!ret) {
+ memcpy(info, &_info, sizeof(*info));
+ info->sensor_id = le16_to_cpu(_info.sensor_id);
+ }
+
+ return ret;
+}
+
+int scpi_sensor_get_value(u16 sensor, u32 *val)
+{
+ struct sensor_value buf;
+ int ret;
+
+ ret = scpi_send_message(SCPI_CMD_SENSOR_VALUE, &sensor, sizeof(sensor),
+ &buf, sizeof(buf));
+ if (!ret)
+ *val = le32_to_cpu(buf.val);
+
+ return ret;
+}
+
+static struct scpi_ops scpi_ops = {
+ .get_version = scpi_get_version,
+ .clk_get_range = scpi_clk_get_range,
+ .clk_get_val = scpi_clk_get_val,
+ .clk_set_val = scpi_clk_set_val,
+ .dvfs_get_idx = scpi_dvfs_get_idx,
+ .dvfs_set_idx = scpi_dvfs_set_idx,
+ .dvfs_get_info = scpi_dvfs_get_info,
+ .sensor_get_capability = scpi_sensor_get_capability,
+ .sensor_get_info = scpi_sensor_get_info,
+ .sensor_get_value = scpi_sensor_get_value,
+};
+
+struct scpi_ops *get_scpi_ops(void)
+{
+ return scpi_info ? scpi_info->scpi_ops : NULL;
+}
+EXPORT_SYMBOL_GPL(get_scpi_ops);
+
+static int scpi_init_versions(struct scpi_drvinfo *info)
+{
+ int ret;
+ struct scp_capabilities caps;
+
+ ret = scpi_send_message(SCPI_CMD_SCPI_CAPABILITIES, NULL, 0,
+ &caps, sizeof(caps));
+ if (!ret) {
+ info->protocol_version = le32_to_cpu(caps.protocol_version);
+ info->firmware_version = le32_to_cpu(caps.platform_version);
+ }
+ return ret;
+}
+
+static ssize_t protocol_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d.%d\n",
+ PROTOCOL_REV_MAJOR(scpi_info->protocol_version),
+ PROTOCOL_REV_MINOR(scpi_info->protocol_version));
+}
+static DEVICE_ATTR_RO(protocol_version);
+
+static ssize_t firmware_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d.%d.%d\n",
+ FW_REV_MAJOR(scpi_info->firmware_version),
+ FW_REV_MINOR(scpi_info->firmware_version),
+ FW_REV_PATCH(scpi_info->firmware_version));
+}
+static DEVICE_ATTR_RO(firmware_version);
+
+static struct attribute *versions_attrs[] = {
+ &dev_attr_firmware_version.attr,
+ &dev_attr_protocol_version.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(versions);
+
+static void
+scpi_free_channels(struct device *dev, struct scpi_chan *pchan, int count)
+{
+ int i;
+
+ for (i = 0; i < count && pchan->chan; i++, pchan++) {
+ mbox_free_channel(pchan->chan);
+ devm_kfree(dev, pchan->xfers);
+ devm_iounmap(dev, pchan->rx_payload);
+ }
+}
+
+static int scpi_remove(struct platform_device *pdev)
+{
+ int i;
+ struct device *dev = &pdev->dev;
+ struct scpi_drvinfo *info = platform_get_drvdata(pdev);
+
+ scpi_info = NULL; /* stop exporting SCPI ops through get_scpi_ops */
+
+ of_platform_depopulate(dev);
+ sysfs_remove_groups(&dev->kobj, versions_groups);
+ scpi_free_channels(dev, info->channels, info->num_chans);
+ platform_set_drvdata(pdev, NULL);
+
+ for (i = 0; i < MAX_DVFS_DOMAINS && info->dvfs[i]; i++) {
+ kfree(info->dvfs[i]->opps);
+ kfree(info->dvfs[i]);
+ }
+ devm_kfree(dev, info->channels);
+ devm_kfree(dev, info);
+
+ return 0;
+}
+
+#define MAX_SCPI_XFERS 10
+static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch)
+{
+ int i;
+ struct scpi_xfer *xfers;
+
+ xfers = devm_kzalloc(dev, MAX_SCPI_XFERS * sizeof(*xfers), GFP_KERNEL);
+ if (!xfers)
+ return -ENOMEM;
+
+ ch->xfers = xfers;
+ for (i = 0; i < MAX_SCPI_XFERS; i++, xfers++)
+ list_add_tail(&xfers->node, &ch->xfers_list);
+ return 0;
+}
+
+static int scpi_probe(struct platform_device *pdev)
+{
+ int count, idx, ret;
+ struct resource res;
+ struct scpi_chan *scpi_chan;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ scpi_info = devm_kzalloc(dev, sizeof(*scpi_info), GFP_KERNEL);
+ if (!scpi_info)
+ return -ENOMEM;
+
+ count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
+ if (count < 0) {
+ dev_err(dev, "no mboxes property in '%s'\n", np->full_name);
+ return -ENODEV;
+ }
+
+ scpi_chan = devm_kcalloc(dev, count, sizeof(*scpi_chan), GFP_KERNEL);
+ if (!scpi_chan)
+ return -ENOMEM;
+
+ for (idx = 0; idx < count; idx++) {
+ resource_size_t size;
+ struct scpi_chan *pchan = scpi_chan + idx;
+ struct mbox_client *cl = &pchan->cl;
+ struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
+
+ if (of_address_to_resource(shmem, 0, &res)) {
+ dev_err(dev, "failed to get SCPI payload mem resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ size = resource_size(&res);
+ pchan->rx_payload = devm_ioremap(dev, res.start, size);
+ if (!pchan->rx_payload) {
+ dev_err(dev, "failed to ioremap SCPI payload\n");
+ ret = -EADDRNOTAVAIL;
+ goto err;
+ }
+ pchan->tx_payload = pchan->rx_payload + (size >> 1);
+
+ cl->dev = dev;
+ cl->rx_callback = scpi_handle_remote_msg;
+ cl->tx_prepare = scpi_tx_prepare;
+ cl->tx_block = true;
+ cl->tx_tout = 50;
+ cl->knows_txdone = false; /* controller can't ack */
+
+ INIT_LIST_HEAD(&pchan->rx_pending);
+ INIT_LIST_HEAD(&pchan->xfers_list);
+ spin_lock_init(&pchan->rx_lock);
+ mutex_init(&pchan->xfers_lock);
+
+ ret = scpi_alloc_xfer_list(dev, pchan);
+ if (!ret) {
+ pchan->chan = mbox_request_channel(cl, idx);
+ if (!IS_ERR(pchan->chan))
+ continue;
+ ret = PTR_ERR(pchan->chan);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get channel%d err %d\n",
+ idx, ret);
+ }
+err:
+ scpi_free_channels(dev, scpi_chan, idx);
+ scpi_info = NULL;
+ return ret;
+ }
+
+ scpi_info->channels = scpi_chan;
+ scpi_info->num_chans = count;
+ platform_set_drvdata(pdev, scpi_info);
+
+ ret = scpi_init_versions(scpi_info);
+ if (ret) {
+ dev_err(dev, "incorrect or no SCP firmware found\n");
+ scpi_remove(pdev);
+ return ret;
+ }
+
+ _dev_info(dev, "SCP Protocol %d.%d Firmware %d.%d.%d version\n",
+ PROTOCOL_REV_MAJOR(scpi_info->protocol_version),
+ PROTOCOL_REV_MINOR(scpi_info->protocol_version),
+ FW_REV_MAJOR(scpi_info->firmware_version),
+ FW_REV_MINOR(scpi_info->firmware_version),
+ FW_REV_PATCH(scpi_info->firmware_version));
+ scpi_info->scpi_ops = &scpi_ops;
+
+ ret = sysfs_create_groups(&dev->kobj, versions_groups);
+ if (ret)
+ dev_err(dev, "unable to create sysfs version group\n");
+
+ return of_platform_populate(dev->of_node, NULL, NULL, dev);
+}
+
+static const struct of_device_id scpi_of_match[] = {
+ {.compatible = "arm,scpi"},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, scpi_of_match);
+
+static struct platform_driver scpi_driver = {
+ .driver = {
+ .name = "scpi_protocol",
+ .of_match_table = scpi_of_match,
+ },
+ .probe = scpi_probe,
+ .remove = scpi_remove,
+};
+module_platform_driver(scpi_driver);
+
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI mailbox protocol driver");
+MODULE_LICENSE("GPL v2");
int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
{
int ret;
- u32 svc_cmd = (svc_id << 10) | cmd_id;
- u32 ret_val = 0;
+ __le32 svc_cmd = cpu_to_le32((svc_id << 10) | cmd_id);
+ __le32 ret_val = 0;
ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
sizeof(svc_cmd), &ret_val, sizeof(ret_val));
if (ret)
return ret;
- return ret_val;
+ return le32_to_cpu(ret_val);
}
int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
+config SENSORS_ARM_SCPI
+ tristate "ARM SCPI Sensors"
+ depends on ARM_SCPI_PROTOCOL
+ help
+ This driver provides support for temperature, voltage, current
+ and power sensors available on ARM Ltd's SCP based platforms. The
+ actual number and type of sensors exported depend on the platform.
+
config SENSORS_ASB100
tristate "Asus ASB100 Bach"
depends on X86 && I2C
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
+obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
--- /dev/null
+/*
+ * System Control and Power Interface(SCPI) based hwmon sensor driver
+ *
+ * Copyright (C) 2015 ARM Ltd.
+ * Punit Agrawal <punit.agrawal@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/scpi_protocol.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+struct sensor_data {
+ struct scpi_sensor_info info;
+ struct device_attribute dev_attr_input;
+ struct device_attribute dev_attr_label;
+ char input[20];
+ char label[20];
+};
+
+struct scpi_thermal_zone {
+ struct list_head list;
+ int sensor_id;
+ struct scpi_sensors *scpi_sensors;
+ struct thermal_zone_device *tzd;
+};
+
+struct scpi_sensors {
+ struct scpi_ops *scpi_ops;
+ struct sensor_data *data;
+ struct list_head thermal_zones;
+ struct attribute **attrs;
+ struct attribute_group group;
+ const struct attribute_group *groups[2];
+};
+
+static int scpi_read_temp(void *dev, int *temp)
+{
+ struct scpi_thermal_zone *zone = dev;
+ struct scpi_sensors *scpi_sensors = zone->scpi_sensors;
+ struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+ struct sensor_data *sensor = &scpi_sensors->data[zone->sensor_id];
+ u32 value;
+ int ret;
+
+ ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+ if (ret)
+ return ret;
+
+ *temp = value;
+ return 0;
+}
+
+/* hwmon callback functions */
+static ssize_t
+scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct scpi_sensors *scpi_sensors = dev_get_drvdata(dev);
+ struct scpi_ops *scpi_ops = scpi_sensors->scpi_ops;
+ struct sensor_data *sensor;
+ u32 value;
+ int ret;
+
+ sensor = container_of(attr, struct sensor_data, dev_attr_input);
+
+ ret = scpi_ops->sensor_get_value(sensor->info.sensor_id, &value);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t
+scpi_show_label(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_data *sensor;
+
+ sensor = container_of(attr, struct sensor_data, dev_attr_label);
+
+ return sprintf(buf, "%s\n", sensor->info.name);
+}
+
+static void
+unregister_thermal_zones(struct platform_device *pdev,
+ struct scpi_sensors *scpi_sensors)
+{
+ struct list_head *pos;
+
+ list_for_each(pos, &scpi_sensors->thermal_zones) {
+ struct scpi_thermal_zone *zone;
+
+ zone = list_entry(pos, struct scpi_thermal_zone, list);
+ thermal_zone_of_sensor_unregister(&pdev->dev, zone->tzd);
+ }
+}
+
+static struct thermal_zone_of_device_ops scpi_sensor_ops = {
+ .get_temp = scpi_read_temp,
+};
+
+static int scpi_hwmon_probe(struct platform_device *pdev)
+{
+ u16 nr_sensors, i;
+ int num_temp = 0, num_volt = 0, num_current = 0, num_power = 0;
+ struct scpi_ops *scpi_ops;
+ struct device *hwdev, *dev = &pdev->dev;
+ struct scpi_sensors *scpi_sensors;
+ int ret;
+
+ scpi_ops = get_scpi_ops();
+ if (!scpi_ops)
+ return -EPROBE_DEFER;
+
+ ret = scpi_ops->sensor_get_capability(&nr_sensors);
+ if (ret)
+ return ret;
+
+ if (!nr_sensors)
+ return -ENODEV;
+
+ scpi_sensors = devm_kzalloc(dev, sizeof(*scpi_sensors), GFP_KERNEL);
+ if (!scpi_sensors)
+ return -ENOMEM;
+
+ scpi_sensors->data = devm_kcalloc(dev, nr_sensors,
+ sizeof(*scpi_sensors->data), GFP_KERNEL);
+ if (!scpi_sensors->data)
+ return -ENOMEM;
+
+ scpi_sensors->attrs = devm_kcalloc(dev, (nr_sensors * 2) + 1,
+ sizeof(*scpi_sensors->attrs), GFP_KERNEL);
+ if (!scpi_sensors->attrs)
+ return -ENOMEM;
+
+ scpi_sensors->scpi_ops = scpi_ops;
+
+ for (i = 0; i < nr_sensors; i++) {
+ struct sensor_data *sensor = &scpi_sensors->data[i];
+
+ ret = scpi_ops->sensor_get_info(i, &sensor->info);
+ if (ret)
+ return ret;
+
+ switch (sensor->info.class) {
+ case TEMPERATURE:
+ snprintf(sensor->input, sizeof(sensor->input),
+ "temp%d_input", num_temp + 1);
+ snprintf(sensor->label, sizeof(sensor->input),
+ "temp%d_label", num_temp + 1);
+ num_temp++;
+ break;
+ case VOLTAGE:
+ snprintf(sensor->input, sizeof(sensor->input),
+ "in%d_input", num_volt);
+ snprintf(sensor->label, sizeof(sensor->input),
+ "in%d_label", num_volt);
+ num_volt++;
+ break;
+ case CURRENT:
+ snprintf(sensor->input, sizeof(sensor->input),
+ "curr%d_input", num_current + 1);
+ snprintf(sensor->label, sizeof(sensor->input),
+ "curr%d_label", num_current + 1);
+ num_current++;
+ break;
+ case POWER:
+ snprintf(sensor->input, sizeof(sensor->input),
+ "power%d_input", num_power + 1);
+ snprintf(sensor->label, sizeof(sensor->input),
+ "power%d_label", num_power + 1);
+ num_power++;
+ break;
+ default:
+ break;
+ }
+
+ sensor->dev_attr_input.attr.mode = S_IRUGO;
+ sensor->dev_attr_input.show = scpi_show_sensor;
+ sensor->dev_attr_input.attr.name = sensor->input;
+
+ sensor->dev_attr_label.attr.mode = S_IRUGO;
+ sensor->dev_attr_label.show = scpi_show_label;
+ sensor->dev_attr_label.attr.name = sensor->label;
+
+ scpi_sensors->attrs[i << 1] = &sensor->dev_attr_input.attr;
+ scpi_sensors->attrs[(i << 1) + 1] = &sensor->dev_attr_label.attr;
+
+ sysfs_attr_init(scpi_sensors->attrs[i << 1]);
+ sysfs_attr_init(scpi_sensors->attrs[(i << 1) + 1]);
+ }
+
+ scpi_sensors->group.attrs = scpi_sensors->attrs;
+ scpi_sensors->groups[0] = &scpi_sensors->group;
+
+ platform_set_drvdata(pdev, scpi_sensors);
+
+ hwdev = devm_hwmon_device_register_with_groups(dev,
+ "scpi_sensors", scpi_sensors, scpi_sensors->groups);
+
+ if (IS_ERR(hwdev))
+ return PTR_ERR(hwdev);
+
+ /*
+ * Register the temperature sensors with the thermal framework
+ * to allow their usage in setting up the thermal zones from
+ * device tree.
+ *
+ * NOTE: Not all temperature sensors maybe used for thermal
+ * control
+ */
+ INIT_LIST_HEAD(&scpi_sensors->thermal_zones);
+ for (i = 0; i < nr_sensors; i++) {
+ struct sensor_data *sensor = &scpi_sensors->data[i];
+ struct scpi_thermal_zone *zone;
+
+ if (sensor->info.class != TEMPERATURE)
+ continue;
+
+ zone = devm_kzalloc(dev, sizeof(*zone), GFP_KERNEL);
+ if (!zone) {
+ ret = -ENOMEM;
+ goto unregister_tzd;
+ }
+
+ zone->sensor_id = i;
+ zone->scpi_sensors = scpi_sensors;
+ zone->tzd = thermal_zone_of_sensor_register(dev, i, zone,
+ &scpi_sensor_ops);
+ /*
+ * The call to thermal_zone_of_sensor_register returns
+ * an error for sensors that are not associated with
+ * any thermal zones or if the thermal subsystem is
+ * not configured.
+ */
+ if (IS_ERR(zone->tzd)) {
+ devm_kfree(dev, zone);
+ continue;
+ }
+ list_add(&zone->list, &scpi_sensors->thermal_zones);
+ }
+
+ return 0;
+
+unregister_tzd:
+ unregister_thermal_zones(pdev, scpi_sensors);
+ return ret;
+}
+
+static int scpi_hwmon_remove(struct platform_device *pdev)
+{
+ struct scpi_sensors *scpi_sensors = platform_get_drvdata(pdev);
+
+ unregister_thermal_zones(pdev, scpi_sensors);
+
+ return 0;
+}
+
+static const struct of_device_id scpi_of_match[] = {
+ {.compatible = "arm,scpi-sensors"},
+ {},
+};
+
+static struct platform_driver scpi_hwmon_platdrv = {
+ .driver = {
+ .name = "scpi-hwmon",
+ .owner = THIS_MODULE,
+ .of_match_table = scpi_of_match,
+ },
+ .probe = scpi_hwmon_probe,
+ .remove = scpi_hwmon_remove,
+};
+module_platform_driver(scpi_hwmon_platdrv);
+
+MODULE_AUTHOR("Punit Agrawal <punit.agrawal@arm.com>");
+MODULE_DESCRIPTION("ARM SCPI HWMON interface driver");
+MODULE_LICENSE("GPL v2");
if (of_property_read_bool(np, "mpmc,extended-wait"))
cfg |= MPMC_STATIC_CFG_EW;
- if (of_property_read_bool(np, "mpmc,buffer-enable"))
+ if (amba_part(adev) == 0x172 &&
+ of_property_read_bool(np, "mpmc,buffer-enable"))
cfg |= MPMC_STATIC_CFG_B;
if (of_property_read_bool(np, "mpmc,write-protect"))
}
static const char * const pl172_revisions[] = {"r1", "r2", "r2p3", "r2p4"};
+static const char * const pl175_revisions[] = {"r1"};
+static const char * const pl176_revisions[] = {"r0"};
static int pl172_probe(struct amba_device *adev, const struct amba_id *id)
{
if (amba_part(adev) == 0x172) {
if (amba_rev(adev) < ARRAY_SIZE(pl172_revisions))
rev = pl172_revisions[amba_rev(adev)];
+ } else if (amba_part(adev) == 0x175) {
+ if (amba_rev(adev) < ARRAY_SIZE(pl175_revisions))
+ rev = pl175_revisions[amba_rev(adev)];
+ } else if (amba_part(adev) == 0x176) {
+ if (amba_rev(adev) < ARRAY_SIZE(pl176_revisions))
+ rev = pl176_revisions[amba_rev(adev)];
}
dev_info(dev, "ARM PL%x revision %s\n", amba_part(adev), rev);
}
static const struct amba_id pl172_ids[] = {
+ /* PrimeCell MPMC PL172, EMC found on NXP LPC18xx and LPC43xx */
{
- .id = 0x07341172,
- .mask = 0xffffffff,
+ .id = 0x07041172,
+ .mask = 0x3f0fffff,
+ },
+ /* PrimeCell MPMC PL175, EMC found on NXP LPC32xx */
+ {
+ .id = 0x07041175,
+ .mask = 0x3f0fffff,
+ },
+ /* PrimeCell MPMC PL176 */
+ {
+ .id = 0x89041176,
+ .mask = 0xff0fffff,
},
{ 0, 0 },
};
if (IS_ERR(clk))
return PTR_ERR(clk);
+ tc->slow_clk = devm_clk_get(&pdev->dev, "slow_clk");
+ if (IS_ERR(tc->slow_clk))
+ return PTR_ERR(tc->slow_clk);
+
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tc->regs = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(tc->regs))
*/
if (i == 5) {
i = slowclk;
- rate = 32768;
+ rate = clk_get_rate(tc->slow_clk);
min = div_u64(NSEC_PER_SEC, rate);
max = min << tc->tcb_config->counter_width;
tcbpwm = devm_kzalloc(&pdev->dev, sizeof(*tcbpwm), GFP_KERNEL);
if (tcbpwm == NULL) {
- atmel_tc_free(tc);
+ err = -ENOMEM;
dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
+ goto err_free_tc;
}
tcbpwm->chip.dev = &pdev->dev;
tcbpwm->chip.npwm = NPWM;
tcbpwm->tc = tc;
+ err = clk_prepare_enable(tc->slow_clk);
+ if (err)
+ goto err_free_tc;
+
spin_lock_init(&tcbpwm->lock);
err = pwmchip_add(&tcbpwm->chip);
- if (err < 0) {
- atmel_tc_free(tc);
- return err;
- }
+ if (err < 0)
+ goto err_disable_clk;
platform_set_drvdata(pdev, tcbpwm);
return 0;
+
+err_disable_clk:
+ clk_disable_unprepare(tcbpwm->tc->slow_clk);
+
+err_free_tc:
+ atmel_tc_free(tc);
+
+ return err;
}
static int atmel_tcb_pwm_remove(struct platform_device *pdev)
struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
int err;
+ clk_disable_unprepare(tcbpwm->tc->slow_clk);
+
err = pwmchip_remove(&tcbpwm->chip);
if (err < 0)
return err;
menu "SOC (System On Chip) specific Drivers"
+source "drivers/soc/brcmstb/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
+source "drivers/soc/rockchip/Kconfig"
source "drivers/soc/sunxi/Kconfig"
source "drivers/soc/ti/Kconfig"
source "drivers/soc/versatile/Kconfig"
# Makefile for the Linux Kernel SOC specific device drivers.
#
+obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
obj-$(CONFIG_MACH_DOVE) += dove/
obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_QCOM) += qcom/
+obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_SOC_TI) += ti/
--- /dev/null
+menuconfig SOC_BRCMSTB
+ bool "Broadcom STB SoC drivers"
+ depends on ARM
+ help
+ Enables drivers for the Broadcom Set-Top Box (STB) series of chips.
+ This option alone enables only some support code, while the drivers
+ can be enabled individually within this menu.
+
+ If unsure, say N.
--- /dev/null
+obj-y += common.o biuctrl.o
--- /dev/null
+/*
+ * Broadcom STB SoCs Bus Unit Interface controls
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "brcmstb: " KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#define CPU_CREDIT_REG_OFFSET 0x184
+#define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000
+
+static void __iomem *cpubiuctrl_base;
+static bool mcp_wr_pairing_en;
+
+static int __init mcp_write_pairing_set(void)
+{
+ u32 creds = 0;
+
+ if (!cpubiuctrl_base)
+ return -1;
+
+ creds = readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+ if (mcp_wr_pairing_en) {
+ pr_info("MCP: Enabling write pairing\n");
+ writel_relaxed(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+ cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+ } else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) {
+ pr_info("MCP: Disabling write pairing\n");
+ writel_relaxed(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+ cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+ } else {
+ pr_info("MCP: Write pairing already disabled\n");
+ }
+
+ return 0;
+}
+
+static int __init setup_hifcpubiuctrl_regs(void)
+{
+ struct device_node *np;
+ int ret = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
+ if (!np) {
+ pr_err("missing BIU control node\n");
+ return -ENODEV;
+ }
+
+ cpubiuctrl_base = of_iomap(np, 0);
+ if (!cpubiuctrl_base) {
+ pr_err("failed to remap BIU control base\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing");
+out:
+ of_node_put(np);
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static u32 cpu_credit_reg_dump; /* for save/restore */
+
+static int brcmstb_cpu_credit_reg_suspend(void)
+{
+ if (cpubiuctrl_base)
+ cpu_credit_reg_dump =
+ readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+ return 0;
+}
+
+static void brcmstb_cpu_credit_reg_resume(void)
+{
+ if (cpubiuctrl_base)
+ writel_relaxed(cpu_credit_reg_dump,
+ cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+}
+
+static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
+ .suspend = brcmstb_cpu_credit_reg_suspend,
+ .resume = brcmstb_cpu_credit_reg_resume,
+};
+#endif
+
+
+void __init brcmstb_biuctrl_init(void)
+{
+ int ret;
+
+ setup_hifcpubiuctrl_regs();
+
+ ret = mcp_write_pairing_set();
+ if (ret) {
+ pr_err("MCP: Unable to disable write pairing!\n");
+ return;
+ }
+
+#ifdef CONFIG_PM_SLEEP
+ register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
+#endif
+}
--- /dev/null
+/*
+ * Copyright © 2014 NVIDIA Corporation
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of.h>
+
+#include <soc/brcmstb/common.h>
+
+static const struct of_device_id brcmstb_machine_match[] = {
+ { .compatible = "brcm,brcmstb", },
+ { }
+};
+
+bool soc_is_brcmstb(void)
+{
+ struct device_node *root;
+
+ root = of_find_node_by_path("/");
+ if (!root)
+ return false;
+
+ return of_match_node(brcmstb_machine_match, root) != NULL;
+}
modes. It interface with various system drivers to put the cores in
low power modes.
+config QCOM_SMEM
+ tristate "Qualcomm Shared Memory Manager (SMEM)"
+ depends on ARCH_QCOM
+ depends on HWSPINLOCK
+ help
+ Say y here to enable support for the Qualcomm Shared Memory Manager.
+ The driver provides an interface to items in a heap shared among all
+ processors in a Qualcomm platform.
+
config QCOM_SMD
tristate "Qualcomm Shared Memory Driver (SMD)"
depends on QCOM_SMEM
Say M here if you want to include support for the Qualcomm RPM as a
module. This will build a module called "qcom-smd-rpm".
-
-config QCOM_SMEM
- tristate "Qualcomm Shared Memory Manager (SMEM)"
- depends on ARCH_QCOM
- help
- Say y here to enable support for the Qualcomm Shared Memory Manager.
- The driver provides an interface to items in a heap shared among all
- processors in a Qualcomm platform.
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/soc/qcom/smd.h>
#include <linux/soc/qcom/smd-rpm.h>
* @length: length of the payload
*/
struct qcom_rpm_header {
- u32 service_type;
- u32 length;
+ __le32 service_type;
+ __le32 length;
};
/**
* @data_len: length of the payload following this header
*/
struct qcom_rpm_request {
- u32 msg_id;
- u32 flags;
- u32 type;
- u32 id;
- u32 data_len;
+ __le32 msg_id;
+ __le32 flags;
+ __le32 type;
+ __le32 id;
+ __le32 data_len;
};
/**
* Multiple of these messages can be stacked in an rpm message.
*/
struct qcom_rpm_message {
- u32 msg_type;
- u32 length;
+ __le32 msg_type;
+ __le32 length;
union {
- u32 msg_id;
+ __le32 msg_id;
u8 message[0];
};
};
static unsigned msg_id = 1;
int left;
int ret;
-
struct {
struct qcom_rpm_header hdr;
struct qcom_rpm_request req;
- u8 payload[count];
- } pkt;
+ u8 payload[];
+ } *pkt;
+ size_t size = sizeof(*pkt) + count;
/* SMD packets to the RPM may not exceed 256 bytes */
- if (WARN_ON(sizeof(pkt) >= 256))
+ if (WARN_ON(size >= 256))
return -EINVAL;
+ pkt = kmalloc(size, GFP_KERNEL);
+ if (!pkt)
+ return -ENOMEM;
+
mutex_lock(&rpm->lock);
- pkt.hdr.service_type = RPM_SERVICE_TYPE_REQUEST;
- pkt.hdr.length = sizeof(struct qcom_rpm_request) + count;
+ pkt->hdr.service_type = cpu_to_le32(RPM_SERVICE_TYPE_REQUEST);
+ pkt->hdr.length = cpu_to_le32(sizeof(struct qcom_rpm_request) + count);
- pkt.req.msg_id = msg_id++;
- pkt.req.flags = BIT(state);
- pkt.req.type = type;
- pkt.req.id = id;
- pkt.req.data_len = count;
- memcpy(pkt.payload, buf, count);
+ pkt->req.msg_id = cpu_to_le32(msg_id++);
+ pkt->req.flags = cpu_to_le32(state);
+ pkt->req.type = cpu_to_le32(type);
+ pkt->req.id = cpu_to_le32(id);
+ pkt->req.data_len = cpu_to_le32(count);
+ memcpy(pkt->payload, buf, count);
- ret = qcom_smd_send(rpm->rpm_channel, &pkt, sizeof(pkt));
+ ret = qcom_smd_send(rpm->rpm_channel, pkt, sizeof(*pkt));
if (ret)
goto out;
ret = rpm->ack_status;
out:
+ kfree(pkt);
mutex_unlock(&rpm->lock);
return ret;
}
size_t count)
{
const struct qcom_rpm_header *hdr = data;
+ size_t hdr_length = le32_to_cpu(hdr->length);
const struct qcom_rpm_message *msg;
struct qcom_smd_rpm *rpm = dev_get_drvdata(&qsdev->dev);
const u8 *buf = data + sizeof(struct qcom_rpm_header);
- const u8 *end = buf + hdr->length;
+ const u8 *end = buf + hdr_length;
char msgbuf[32];
int status = 0;
- u32 len;
+ u32 len, msg_length;
- if (hdr->service_type != RPM_SERVICE_TYPE_REQUEST ||
- hdr->length < sizeof(struct qcom_rpm_message)) {
+ if (le32_to_cpu(hdr->service_type) != RPM_SERVICE_TYPE_REQUEST ||
+ hdr_length < sizeof(struct qcom_rpm_message)) {
dev_err(&qsdev->dev, "invalid request\n");
return 0;
}
while (buf < end) {
msg = (struct qcom_rpm_message *)buf;
- switch (msg->msg_type) {
+ msg_length = le32_to_cpu(msg->length);
+ switch (le32_to_cpu(msg->msg_type)) {
case RPM_MSG_TYPE_MSG_ID:
break;
case RPM_MSG_TYPE_ERR:
- len = min_t(u32, ALIGN(msg->length, 4), sizeof(msgbuf));
+ len = min_t(u32, ALIGN(msg_length, 4), sizeof(msgbuf));
memcpy_fromio(msgbuf, msg->message, len);
msgbuf[len - 1] = 0;
break;
}
- buf = PTR_ALIGN(buf + 2 * sizeof(u32) + msg->length, 4);
+ buf = PTR_ALIGN(buf + 2 * sizeof(u32) + msg_length, 4);
}
rpm->ack_status = status;
*/
struct smd_channel_info;
+struct smd_channel_info_pair;
struct smd_channel_info_word;
+struct smd_channel_info_word_pair;
#define SMD_ALLOC_TBL_COUNT 2
#define SMD_ALLOC_TBL_SIZE 64
.fifo_base_id = 338
},
{
- .alloc_tbl_id = 14,
- .info_base_id = 266,
+ .alloc_tbl_id = 266,
+ .info_base_id = 138,
.fifo_base_id = 202,
},
};
* @name: name of the channel
* @state: local state of the channel
* @remote_state: remote state of the channel
- * @tx_info: byte aligned outgoing channel info
- * @rx_info: byte aligned incoming channel info
- * @tx_info_word: word aligned outgoing channel info
- * @rx_info_word: word aligned incoming channel info
+ * @info: byte aligned outgoing/incoming channel info
+ * @info_word: word aligned outgoing/incoming channel info
* @tx_lock: lock to make writes to the channel mutually exclusive
* @fblockread_event: wakeup event tied to tx fBLOCKREADINTR
* @tx_fifo: pointer to the outgoing ring buffer
enum smd_channel_state state;
enum smd_channel_state remote_state;
- struct smd_channel_info *tx_info;
- struct smd_channel_info *rx_info;
-
- struct smd_channel_info_word *tx_info_word;
- struct smd_channel_info_word *rx_info_word;
+ struct smd_channel_info_pair *info;
+ struct smd_channel_info_word_pair *info_word;
struct mutex tx_lock;
wait_queue_head_t fblockread_event;
* Format of the smd_info smem items, for byte aligned channels.
*/
struct smd_channel_info {
- u32 state;
+ __le32 state;
u8 fDSR;
u8 fCTS;
u8 fCD;
u8 fTAIL;
u8 fSTATE;
u8 fBLOCKREADINTR;
- u32 tail;
- u32 head;
+ __le32 tail;
+ __le32 head;
+};
+
+struct smd_channel_info_pair {
+ struct smd_channel_info tx;
+ struct smd_channel_info rx;
};
/*
* Format of the smd_info smem items, for word aligned channels.
*/
struct smd_channel_info_word {
- u32 state;
- u32 fDSR;
- u32 fCTS;
- u32 fCD;
- u32 fRI;
- u32 fHEAD;
- u32 fTAIL;
- u32 fSTATE;
- u32 fBLOCKREADINTR;
- u32 tail;
- u32 head;
+ __le32 state;
+ __le32 fDSR;
+ __le32 fCTS;
+ __le32 fCD;
+ __le32 fRI;
+ __le32 fHEAD;
+ __le32 fTAIL;
+ __le32 fSTATE;
+ __le32 fBLOCKREADINTR;
+ __le32 tail;
+ __le32 head;
};
-#define GET_RX_CHANNEL_INFO(channel, param) \
- (channel->rx_info_word ? \
- channel->rx_info_word->param : \
- channel->rx_info->param)
-
-#define SET_RX_CHANNEL_INFO(channel, param, value) \
- (channel->rx_info_word ? \
- (channel->rx_info_word->param = value) : \
- (channel->rx_info->param = value))
-
-#define GET_TX_CHANNEL_INFO(channel, param) \
- (channel->tx_info_word ? \
- channel->tx_info_word->param : \
- channel->tx_info->param)
+struct smd_channel_info_word_pair {
+ struct smd_channel_info_word tx;
+ struct smd_channel_info_word rx;
+};
-#define SET_TX_CHANNEL_INFO(channel, param, value) \
- (channel->tx_info_word ? \
- (channel->tx_info_word->param = value) : \
- (channel->tx_info->param = value))
+#define GET_RX_CHANNEL_FLAG(channel, param) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \
+ channel->info_word ? \
+ le32_to_cpu(channel->info_word->rx.param) : \
+ channel->info->rx.param; \
+ })
+
+#define GET_RX_CHANNEL_INFO(channel, param) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \
+ le32_to_cpu(channel->info_word ? \
+ channel->info_word->rx.param : \
+ channel->info->rx.param); \
+ })
+
+#define SET_RX_CHANNEL_FLAG(channel, param, value) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u8)); \
+ if (channel->info_word) \
+ channel->info_word->rx.param = cpu_to_le32(value); \
+ else \
+ channel->info->rx.param = value; \
+ })
+
+#define SET_RX_CHANNEL_INFO(channel, param, value) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->rx.param) != sizeof(u32)); \
+ if (channel->info_word) \
+ channel->info_word->rx.param = cpu_to_le32(value); \
+ else \
+ channel->info->rx.param = cpu_to_le32(value); \
+ })
+
+#define GET_TX_CHANNEL_FLAG(channel, param) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \
+ channel->info_word ? \
+ le32_to_cpu(channel->info_word->tx.param) : \
+ channel->info->tx.param; \
+ })
+
+#define GET_TX_CHANNEL_INFO(channel, param) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \
+ le32_to_cpu(channel->info_word ? \
+ channel->info_word->tx.param : \
+ channel->info->tx.param); \
+ })
+
+#define SET_TX_CHANNEL_FLAG(channel, param, value) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u8)); \
+ if (channel->info_word) \
+ channel->info_word->tx.param = cpu_to_le32(value); \
+ else \
+ channel->info->tx.param = value; \
+ })
+
+#define SET_TX_CHANNEL_INFO(channel, param, value) \
+ ({ \
+ BUILD_BUG_ON(sizeof(channel->info->tx.param) != sizeof(u32)); \
+ if (channel->info_word) \
+ channel->info_word->tx.param = cpu_to_le32(value); \
+ else \
+ channel->info->tx.param = cpu_to_le32(value); \
+ })
/**
* struct qcom_smd_alloc_entry - channel allocation entry
*/
struct qcom_smd_alloc_entry {
u8 name[20];
- u32 cid;
- u32 flags;
- u32 ref_count;
+ __le32 cid;
+ __le32 flags;
+ __le32 ref_count;
} __packed;
#define SMD_CHANNEL_FLAGS_EDGE_MASK 0xff
static void qcom_smd_channel_reset(struct qcom_smd_channel *channel)
{
SET_TX_CHANNEL_INFO(channel, state, SMD_CHANNEL_CLOSED);
- SET_TX_CHANNEL_INFO(channel, fDSR, 0);
- SET_TX_CHANNEL_INFO(channel, fCTS, 0);
- SET_TX_CHANNEL_INFO(channel, fCD, 0);
- SET_TX_CHANNEL_INFO(channel, fRI, 0);
- SET_TX_CHANNEL_INFO(channel, fHEAD, 0);
- SET_TX_CHANNEL_INFO(channel, fTAIL, 0);
- SET_TX_CHANNEL_INFO(channel, fSTATE, 1);
- SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1);
+ SET_TX_CHANNEL_FLAG(channel, fDSR, 0);
+ SET_TX_CHANNEL_FLAG(channel, fCTS, 0);
+ SET_TX_CHANNEL_FLAG(channel, fCD, 0);
+ SET_TX_CHANNEL_FLAG(channel, fRI, 0);
+ SET_TX_CHANNEL_FLAG(channel, fHEAD, 0);
+ SET_TX_CHANNEL_FLAG(channel, fTAIL, 0);
+ SET_TX_CHANNEL_FLAG(channel, fSTATE, 1);
+ SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 1);
SET_TX_CHANNEL_INFO(channel, head, 0);
SET_TX_CHANNEL_INFO(channel, tail, 0);
dev_dbg(edge->smd->dev, "set_state(%s, %d)\n", channel->name, state);
- SET_TX_CHANNEL_INFO(channel, fDSR, is_open);
- SET_TX_CHANNEL_INFO(channel, fCTS, is_open);
- SET_TX_CHANNEL_INFO(channel, fCD, is_open);
+ SET_TX_CHANNEL_FLAG(channel, fDSR, is_open);
+ SET_TX_CHANNEL_FLAG(channel, fCTS, is_open);
+ SET_TX_CHANNEL_FLAG(channel, fCD, is_open);
SET_TX_CHANNEL_INFO(channel, state, state);
- SET_TX_CHANNEL_INFO(channel, fSTATE, 1);
+ SET_TX_CHANNEL_FLAG(channel, fSTATE, 1);
channel->state = state;
qcom_smd_signal_channel(channel);
/*
* Copy count bytes of data using 32bit accesses, if that's required.
*/
-static void smd_copy_to_fifo(void __iomem *_dst,
- const void *_src,
+static void smd_copy_to_fifo(void __iomem *dst,
+ const void *src,
size_t count,
bool word_aligned)
{
- u32 *dst = (u32 *)_dst;
- u32 *src = (u32 *)_src;
-
if (word_aligned) {
- count /= sizeof(u32);
- while (count--)
- writel_relaxed(*src++, dst++);
+ __iowrite32_copy(dst, src, count / sizeof(u32));
} else {
- memcpy_toio(_dst, _src, count);
+ memcpy_toio(dst, src, count);
}
}
if (word_aligned) {
count /= sizeof(u32);
while (count--)
- *dst++ = readl_relaxed(src++);
+ *dst++ = __raw_readl(src++);
} else {
memcpy_fromio(_dst, _src, count);
}
unsigned tail;
size_t len;
- word_aligned = channel->rx_info_word != NULL;
+ word_aligned = channel->info_word;
tail = GET_RX_CHANNEL_INFO(channel, tail);
len = min_t(size_t, count, channel->fifo_size - tail);
{
bool need_state_scan = false;
int remote_state;
- u32 pktlen;
+ __le32 pktlen;
int avail;
int ret;
need_state_scan = true;
}
/* Indicate that we have seen any state change */
- SET_RX_CHANNEL_INFO(channel, fSTATE, 0);
+ SET_RX_CHANNEL_FLAG(channel, fSTATE, 0);
/* Signal waiting qcom_smd_send() about the interrupt */
- if (!GET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR))
+ if (!GET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR))
wake_up_interruptible(&channel->fblockread_event);
/* Don't consume any data until we've opened the channel */
goto out;
/* Indicate that we've seen the new data */
- SET_RX_CHANNEL_INFO(channel, fHEAD, 0);
+ SET_RX_CHANNEL_FLAG(channel, fHEAD, 0);
/* Consume data */
for (;;) {
if (!channel->pkt_size && avail >= SMD_PACKET_HEADER_LEN) {
qcom_smd_channel_peek(channel, &pktlen, sizeof(pktlen));
qcom_smd_channel_advance(channel, SMD_PACKET_HEADER_LEN);
- channel->pkt_size = pktlen;
+ channel->pkt_size = le32_to_cpu(pktlen);
} else if (channel->pkt_size && avail >= channel->pkt_size) {
ret = qcom_smd_channel_recv_single(channel);
if (ret)
}
/* Indicate that we have seen and updated tail */
- SET_RX_CHANNEL_INFO(channel, fTAIL, 1);
+ SET_RX_CHANNEL_FLAG(channel, fTAIL, 1);
/* Signal the remote that we've consumed the data (if requested) */
- if (!GET_RX_CHANNEL_INFO(channel, fBLOCKREADINTR)) {
+ if (!GET_RX_CHANNEL_FLAG(channel, fBLOCKREADINTR)) {
/* Ensure ordering of channel info updates */
wmb();
unsigned head;
size_t len;
- word_aligned = channel->tx_info_word != NULL;
+ word_aligned = channel->info_word;
head = GET_TX_CHANNEL_INFO(channel, head);
len = min_t(size_t, count, channel->fifo_size - head);
*/
int qcom_smd_send(struct qcom_smd_channel *channel, const void *data, int len)
{
- u32 hdr[5] = {len,};
+ __le32 hdr[5] = { cpu_to_le32(len), };
int tlen = sizeof(hdr) + len;
int ret;
/* Word aligned channels only accept word size aligned data */
- if (channel->rx_info_word != NULL && len % 4)
+ if (channel->info_word && len % 4)
+ return -EINVAL;
+
+ /* Reject packets that are too big */
+ if (tlen >= channel->fifo_size)
return -EINVAL;
ret = mutex_lock_interruptible(&channel->tx_lock);
goto out;
}
- SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 0);
+ SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 0);
ret = wait_event_interruptible(channel->fblockread_event,
qcom_smd_get_tx_avail(channel) >= tlen ||
if (ret)
goto out;
- SET_TX_CHANNEL_INFO(channel, fBLOCKREADINTR, 1);
+ SET_TX_CHANNEL_FLAG(channel, fBLOCKREADINTR, 1);
}
- SET_TX_CHANNEL_INFO(channel, fTAIL, 0);
+ SET_TX_CHANNEL_FLAG(channel, fTAIL, 0);
qcom_smd_write_fifo(channel, hdr, sizeof(hdr));
qcom_smd_write_fifo(channel, data, len);
- SET_TX_CHANNEL_INFO(channel, fHEAD, 1);
+ SET_TX_CHANNEL_FLAG(channel, fHEAD, 1);
/* Ensure ordering of channel info updates */
wmb();
static int qcom_smd_dev_match(struct device *dev, struct device_driver *drv)
{
+ struct qcom_smd_device *qsdev = to_smd_device(dev);
+ struct qcom_smd_driver *qsdrv = container_of(drv, struct qcom_smd_driver, driver);
+ const struct qcom_smd_id *match = qsdrv->smd_match_table;
+ const char *name = qsdev->channel->name;
+
+ if (match) {
+ while (match->name[0]) {
+ if (!strcmp(match->name, name))
+ return 1;
+ match++;
+ }
+ }
+
return of_driver_match_device(dev, drv);
}
for_each_available_child_of_node(edge_node, child) {
key = "qcom,smd-channels";
ret = of_property_read_string(child, key, &name);
- if (ret) {
- of_node_put(child);
+ if (ret)
continue;
- }
if (strcmp(name, channel) == 0)
return child;
if (channel->qsdev)
return -EEXIST;
- node = qcom_smd_match_channel(edge->of_node, channel->name);
- if (!node) {
- dev_dbg(smd->dev, "no match for '%s'\n", channel->name);
- return -ENXIO;
- }
-
dev_dbg(smd->dev, "registering '%s'\n", channel->name);
qsdev = kzalloc(sizeof(*qsdev), GFP_KERNEL);
if (!qsdev)
return -ENOMEM;
- dev_set_name(&qsdev->dev, "%s.%s", edge->of_node->name, node->name);
+ node = qcom_smd_match_channel(edge->of_node, channel->name);
+ dev_set_name(&qsdev->dev, "%s.%s",
+ edge->of_node->name,
+ node ? node->name : channel->name);
+
qsdev->dev.parent = smd->dev;
qsdev->dev.bus = &qcom_smd_bus;
qsdev->dev.release = qcom_smd_release_device;
spin_lock_init(&channel->recv_lock);
init_waitqueue_head(&channel->fblockread_event);
- ret = qcom_smem_get(edge->remote_pid, smem_info_item, (void **)&info,
- &info_size);
- if (ret)
+ info = qcom_smem_get(edge->remote_pid, smem_info_item, &info_size);
+ if (IS_ERR(info)) {
+ ret = PTR_ERR(info);
goto free_name_and_channel;
+ }
/*
* Use the size of the item to figure out which channel info struct to
* use.
*/
if (info_size == 2 * sizeof(struct smd_channel_info_word)) {
- channel->tx_info_word = info;
- channel->rx_info_word = info + sizeof(struct smd_channel_info_word);
+ channel->info_word = info;
} else if (info_size == 2 * sizeof(struct smd_channel_info)) {
- channel->tx_info = info;
- channel->rx_info = info + sizeof(struct smd_channel_info);
+ channel->info = info;
} else {
dev_err(smd->dev,
"channel info of size %zu not supported\n", info_size);
goto free_name_and_channel;
}
- ret = qcom_smem_get(edge->remote_pid, smem_fifo_item, &fifo_base,
- &fifo_size);
- if (ret)
+ fifo_base = qcom_smem_get(edge->remote_pid, smem_fifo_item, &fifo_size);
+ if (IS_ERR(fifo_base)) {
+ ret = PTR_ERR(fifo_base);
goto free_name_and_channel;
+ }
/* The channel consist of a rx and tx fifo of equal size */
fifo_size /= 2;
unsigned long flags;
unsigned fifo_id;
unsigned info_id;
- int ret;
int tbl;
int i;
+ u32 eflags, cid;
for (tbl = 0; tbl < SMD_ALLOC_TBL_COUNT; tbl++) {
- ret = qcom_smem_get(edge->remote_pid,
- smem_items[tbl].alloc_tbl_id,
- (void **)&alloc_tbl,
- NULL);
- if (ret < 0)
+ alloc_tbl = qcom_smem_get(edge->remote_pid,
+ smem_items[tbl].alloc_tbl_id, NULL);
+ if (IS_ERR(alloc_tbl))
continue;
for (i = 0; i < SMD_ALLOC_TBL_SIZE; i++) {
entry = &alloc_tbl[i];
+ eflags = le32_to_cpu(entry->flags);
if (test_bit(i, edge->allocated[tbl]))
continue;
if (!entry->name[0])
continue;
- if (!(entry->flags & SMD_CHANNEL_FLAGS_PACKET))
+ if (!(eflags & SMD_CHANNEL_FLAGS_PACKET))
continue;
- if ((entry->flags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id)
+ if ((eflags & SMD_CHANNEL_FLAGS_EDGE_MASK) != edge->edge_id)
continue;
- info_id = smem_items[tbl].info_base_id + entry->cid;
- fifo_id = smem_items[tbl].fifo_base_id + entry->cid;
+ cid = le32_to_cpu(entry->cid);
+ info_id = smem_items[tbl].info_base_id + cid;
+ fifo_id = smem_items[tbl].fifo_base_id + cid;
channel = qcom_smd_create_channel(edge, info_id, fifo_id, entry->name);
if (IS_ERR(channel))
int num_edges;
int ret;
int i = 0;
+ void *p;
/* Wait for smem */
- ret = qcom_smem_get(QCOM_SMEM_HOST_ANY, smem_items[0].alloc_tbl_id, NULL, NULL);
- if (ret == -EPROBE_DEFER)
- return ret;
+ p = qcom_smem_get(QCOM_SMEM_HOST_ANY, smem_items[0].alloc_tbl_id, NULL);
+ if (PTR_ERR(p) == -EPROBE_DEFER)
+ return PTR_ERR(p);
num_edges = of_get_available_child_count(pdev->dev.of_node);
array_size = sizeof(*smd) + num_edges * sizeof(struct qcom_smd_edge);
* @params: parameters to the command
*/
struct smem_proc_comm {
- u32 command;
- u32 status;
- u32 params[2];
+ __le32 command;
+ __le32 status;
+ __le32 params[2];
};
/**
* the default region. bits 0,1 are reserved
*/
struct smem_global_entry {
- u32 allocated;
- u32 offset;
- u32 size;
- u32 aux_base; /* bits 1:0 reserved */
+ __le32 allocated;
+ __le32 offset;
+ __le32 size;
+ __le32 aux_base; /* bits 1:0 reserved */
};
#define AUX_BASE_MASK 0xfffffffc
*/
struct smem_header {
struct smem_proc_comm proc_comm[4];
- u32 version[32];
- u32 initialized;
- u32 free_offset;
- u32 available;
- u32 reserved;
+ __le32 version[32];
+ __le32 initialized;
+ __le32 free_offset;
+ __le32 available;
+ __le32 reserved;
struct smem_global_entry toc[SMEM_ITEM_COUNT];
};
* @reserved: reserved entries for later use
*/
struct smem_ptable_entry {
- u32 offset;
- u32 size;
- u32 flags;
- u16 host0;
- u16 host1;
- u32 reserved[8];
+ __le32 offset;
+ __le32 size;
+ __le32 flags;
+ __le16 host0;
+ __le16 host1;
+ __le32 reserved[8];
};
/**
* @entry: list of @smem_ptable_entry for the @num_entries partitions
*/
struct smem_ptable {
- u32 magic;
- u32 version;
- u32 num_entries;
- u32 reserved[5];
+ u8 magic[4];
+ __le32 version;
+ __le32 num_entries;
+ __le32 reserved[5];
struct smem_ptable_entry entry[];
};
-#define SMEM_PTABLE_MAGIC 0x434f5424 /* "$TOC" */
+
+static const u8 SMEM_PTABLE_MAGIC[] = { 0x24, 0x54, 0x4f, 0x43 }; /* "$TOC" */
/**
* struct smem_partition_header - header of the partitions
* @reserved: for now reserved entries
*/
struct smem_partition_header {
- u32 magic;
- u16 host0;
- u16 host1;
- u32 size;
- u32 offset_free_uncached;
- u32 offset_free_cached;
- u32 reserved[3];
+ u8 magic[4];
+ __le16 host0;
+ __le16 host1;
+ __le32 size;
+ __le32 offset_free_uncached;
+ __le32 offset_free_cached;
+ __le32 reserved[3];
};
-#define SMEM_PART_MAGIC 0x54525024 /* "$PRT" */
+
+static const u8 SMEM_PART_MAGIC[] = { 0x24, 0x50, 0x52, 0x54 };
/**
* struct smem_private_entry - header of each item in the private partition
* @reserved: for now reserved entry
*/
struct smem_private_entry {
- u16 canary;
- u16 item;
- u32 size; /* includes padding bytes */
- u16 padding_data;
- u16 padding_hdr;
- u32 reserved;
+ u16 canary; /* bytes are the same so no swapping needed */
+ __le16 item;
+ __le32 size; /* includes padding bytes */
+ __le16 padding_data;
+ __le16 padding_hdr;
+ __le32 reserved;
};
#define SMEM_PRIVATE_CANARY 0xa5a5
struct smem_region regions[0];
};
+static struct smem_private_entry *
+phdr_to_last_private_entry(struct smem_partition_header *phdr)
+{
+ void *p = phdr;
+
+ return p + le32_to_cpu(phdr->offset_free_uncached);
+}
+
+static void *phdr_to_first_cached_entry(struct smem_partition_header *phdr)
+{
+ void *p = phdr;
+
+ return p + le32_to_cpu(phdr->offset_free_cached);
+}
+
+static struct smem_private_entry *
+phdr_to_first_private_entry(struct smem_partition_header *phdr)
+{
+ void *p = phdr;
+
+ return p + sizeof(*phdr);
+}
+
+static struct smem_private_entry *
+private_entry_next(struct smem_private_entry *e)
+{
+ void *p = e;
+
+ return p + sizeof(*e) + le16_to_cpu(e->padding_hdr) +
+ le32_to_cpu(e->size);
+}
+
+static void *entry_to_item(struct smem_private_entry *e)
+{
+ void *p = e;
+
+ return p + sizeof(*e) + le16_to_cpu(e->padding_hdr);
+}
+
/* Pointer to the one and only smem handle */
static struct qcom_smem *__smem;
size_t size)
{
struct smem_partition_header *phdr;
- struct smem_private_entry *hdr;
+ struct smem_private_entry *hdr, *end;
size_t alloc_size;
- void *p;
+ void *cached;
phdr = smem->partitions[host];
+ hdr = phdr_to_first_private_entry(phdr);
+ end = phdr_to_last_private_entry(phdr);
+ cached = phdr_to_first_cached_entry(phdr);
- p = (void *)phdr + sizeof(*phdr);
- while (p < (void *)phdr + phdr->offset_free_uncached) {
- hdr = p;
-
+ while (hdr < end) {
if (hdr->canary != SMEM_PRIVATE_CANARY) {
dev_err(smem->dev,
"Found invalid canary in host %d partition\n",
return -EINVAL;
}
- if (hdr->item == item)
+ if (le16_to_cpu(hdr->item) == item)
return -EEXIST;
- p += sizeof(*hdr) + hdr->padding_hdr + hdr->size;
+ hdr = private_entry_next(hdr);
}
/* Check that we don't grow into the cached region */
alloc_size = sizeof(*hdr) + ALIGN(size, 8);
- if (p + alloc_size >= (void *)phdr + phdr->offset_free_cached) {
+ if ((void *)hdr + alloc_size >= cached) {
dev_err(smem->dev, "Out of memory\n");
return -ENOSPC;
}
- hdr = p;
hdr->canary = SMEM_PRIVATE_CANARY;
- hdr->item = item;
- hdr->size = ALIGN(size, 8);
- hdr->padding_data = hdr->size - size;
+ hdr->item = cpu_to_le16(item);
+ hdr->size = cpu_to_le32(ALIGN(size, 8));
+ hdr->padding_data = cpu_to_le16(le32_to_cpu(hdr->size) - size);
hdr->padding_hdr = 0;
/*
* gets a consistent view of the linked list.
*/
wmb();
- phdr->offset_free_uncached += alloc_size;
+ le32_add_cpu(&phdr->offset_free_uncached, alloc_size);
return 0;
}
return -EEXIST;
size = ALIGN(size, 8);
- if (WARN_ON(size > header->available))
+ if (WARN_ON(size > le32_to_cpu(header->available)))
return -ENOMEM;
entry->offset = header->free_offset;
- entry->size = size;
+ entry->size = cpu_to_le32(size);
/*
* Ensure the header is consistent before we mark the item allocated,
* even though they do not take the spinlock on read.
*/
wmb();
- entry->allocated = 1;
+ entry->allocated = cpu_to_le32(1);
- header->free_offset += size;
- header->available -= size;
+ le32_add_cpu(&header->free_offset, size);
+ le32_add_cpu(&header->available, -size);
return 0;
}
}
EXPORT_SYMBOL(qcom_smem_alloc);
-static int qcom_smem_get_global(struct qcom_smem *smem,
- unsigned item,
- void **ptr,
- size_t *size)
+static void *qcom_smem_get_global(struct qcom_smem *smem,
+ unsigned item,
+ size_t *size)
{
struct smem_header *header;
struct smem_region *area;
unsigned i;
if (WARN_ON(item >= SMEM_ITEM_COUNT))
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
header = smem->regions[0].virt_base;
entry = &header->toc[item];
if (!entry->allocated)
- return -ENXIO;
+ return ERR_PTR(-ENXIO);
- if (ptr != NULL) {
- aux_base = entry->aux_base & AUX_BASE_MASK;
+ aux_base = le32_to_cpu(entry->aux_base) & AUX_BASE_MASK;
- for (i = 0; i < smem->num_regions; i++) {
- area = &smem->regions[i];
+ for (i = 0; i < smem->num_regions; i++) {
+ area = &smem->regions[i];
- if (area->aux_base == aux_base || !aux_base) {
- *ptr = area->virt_base + entry->offset;
- break;
- }
+ if (area->aux_base == aux_base || !aux_base) {
+ if (size != NULL)
+ *size = le32_to_cpu(entry->size);
+ return area->virt_base + le32_to_cpu(entry->offset);
}
}
- if (size != NULL)
- *size = entry->size;
- return 0;
+ return ERR_PTR(-ENOENT);
}
-static int qcom_smem_get_private(struct qcom_smem *smem,
- unsigned host,
- unsigned item,
- void **ptr,
- size_t *size)
+static void *qcom_smem_get_private(struct qcom_smem *smem,
+ unsigned host,
+ unsigned item,
+ size_t *size)
{
struct smem_partition_header *phdr;
- struct smem_private_entry *hdr;
- void *p;
+ struct smem_private_entry *e, *end;
phdr = smem->partitions[host];
+ e = phdr_to_first_private_entry(phdr);
+ end = phdr_to_last_private_entry(phdr);
- p = (void *)phdr + sizeof(*phdr);
- while (p < (void *)phdr + phdr->offset_free_uncached) {
- hdr = p;
-
- if (hdr->canary != SMEM_PRIVATE_CANARY) {
+ while (e < end) {
+ if (e->canary != SMEM_PRIVATE_CANARY) {
dev_err(smem->dev,
"Found invalid canary in host %d partition\n",
host);
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
}
- if (hdr->item == item) {
- if (ptr != NULL)
- *ptr = p + sizeof(*hdr) + hdr->padding_hdr;
-
+ if (le16_to_cpu(e->item) == item) {
if (size != NULL)
- *size = hdr->size - hdr->padding_data;
+ *size = le32_to_cpu(e->size) -
+ le16_to_cpu(e->padding_data);
- return 0;
+ return entry_to_item(e);
}
- p += sizeof(*hdr) + hdr->padding_hdr + hdr->size;
+ e = private_entry_next(e);
}
- return -ENOENT;
+ return ERR_PTR(-ENOENT);
}
/**
* qcom_smem_get() - resolve ptr of size of a smem item
* @host: the remote processor, or -1
* @item: smem item handle
- * @ptr: pointer to be filled out with address of the item
* @size: pointer to be filled out with size of the item
*
- * Looks up pointer and size of a smem item.
+ * Looks up smem item and returns pointer to it. Size of smem
+ * item is returned in @size.
*/
-int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size)
+void *qcom_smem_get(unsigned host, unsigned item, size_t *size)
{
unsigned long flags;
int ret;
+ void *ptr = ERR_PTR(-EPROBE_DEFER);
if (!__smem)
- return -EPROBE_DEFER;
+ return ptr;
ret = hwspin_lock_timeout_irqsave(__smem->hwlock,
HWSPINLOCK_TIMEOUT,
&flags);
if (ret)
- return ret;
+ return ERR_PTR(ret);
if (host < SMEM_HOST_COUNT && __smem->partitions[host])
- ret = qcom_smem_get_private(__smem, host, item, ptr, size);
+ ptr = qcom_smem_get_private(__smem, host, item, size);
else
- ret = qcom_smem_get_global(__smem, item, ptr, size);
+ ptr = qcom_smem_get_global(__smem, item, size);
hwspin_unlock_irqrestore(__smem->hwlock, &flags);
- return ret;
+
+ return ptr;
}
EXPORT_SYMBOL(qcom_smem_get);
if (host < SMEM_HOST_COUNT && __smem->partitions[host]) {
phdr = __smem->partitions[host];
- ret = phdr->offset_free_cached - phdr->offset_free_uncached;
+ ret = le32_to_cpu(phdr->offset_free_cached) -
+ le32_to_cpu(phdr->offset_free_uncached);
} else {
header = __smem->regions[0].virt_base;
- ret = header->available;
+ ret = le32_to_cpu(header->available);
}
return ret;
static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
{
- unsigned *versions;
+ __le32 *versions;
size_t size;
- int ret;
- ret = qcom_smem_get_global(smem, SMEM_ITEM_VERSION,
- (void **)&versions, &size);
- if (ret < 0) {
+ versions = qcom_smem_get_global(smem, SMEM_ITEM_VERSION, &size);
+ if (IS_ERR(versions)) {
dev_err(smem->dev, "Unable to read the version item\n");
return -ENOENT;
}
return -EINVAL;
}
- return versions[SMEM_MASTER_SBL_VERSION_INDEX];
+ return le32_to_cpu(versions[SMEM_MASTER_SBL_VERSION_INDEX]);
}
static int qcom_smem_enumerate_partitions(struct qcom_smem *smem,
struct smem_ptable_entry *entry;
struct smem_ptable *ptable;
unsigned remote_host;
+ u32 version, host0, host1;
int i;
ptable = smem->regions[0].virt_base + smem->regions[0].size - SZ_4K;
- if (ptable->magic != SMEM_PTABLE_MAGIC)
+ if (memcmp(ptable->magic, SMEM_PTABLE_MAGIC, sizeof(ptable->magic)))
return 0;
- if (ptable->version != 1) {
+ version = le32_to_cpu(ptable->version);
+ if (version != 1) {
dev_err(smem->dev,
- "Unsupported partition header version %d\n",
- ptable->version);
+ "Unsupported partition header version %d\n", version);
return -EINVAL;
}
- for (i = 0; i < ptable->num_entries; i++) {
+ for (i = 0; i < le32_to_cpu(ptable->num_entries); i++) {
entry = &ptable->entry[i];
+ host0 = le16_to_cpu(entry->host0);
+ host1 = le16_to_cpu(entry->host1);
- if (entry->host0 != local_host && entry->host1 != local_host)
+ if (host0 != local_host && host1 != local_host)
continue;
- if (!entry->offset)
+ if (!le32_to_cpu(entry->offset))
continue;
- if (!entry->size)
+ if (!le32_to_cpu(entry->size))
continue;
- if (entry->host0 == local_host)
- remote_host = entry->host1;
+ if (host0 == local_host)
+ remote_host = host1;
else
- remote_host = entry->host0;
+ remote_host = host0;
if (remote_host >= SMEM_HOST_COUNT) {
dev_err(smem->dev,
return -EINVAL;
}
- header = smem->regions[0].virt_base + entry->offset;
+ header = smem->regions[0].virt_base + le32_to_cpu(entry->offset);
+ host0 = le16_to_cpu(header->host0);
+ host1 = le16_to_cpu(header->host1);
- if (header->magic != SMEM_PART_MAGIC) {
+ if (memcmp(header->magic, SMEM_PART_MAGIC,
+ sizeof(header->magic))) {
dev_err(smem->dev,
"Partition %d has invalid magic\n", i);
return -EINVAL;
}
- if (header->host0 != local_host && header->host1 != local_host) {
+ if (host0 != local_host && host1 != local_host) {
dev_err(smem->dev,
"Partition %d hosts are invalid\n", i);
return -EINVAL;
}
- if (header->host0 != remote_host && header->host1 != remote_host) {
+ if (host0 != remote_host && host1 != remote_host) {
dev_err(smem->dev,
"Partition %d hosts are invalid\n", i);
return -EINVAL;
return -EINVAL;
}
- if (header->offset_free_uncached > header->size) {
+ if (le32_to_cpu(header->offset_free_uncached) > le32_to_cpu(header->size)) {
dev_err(smem->dev,
"Partition %d has invalid free pointer\n", i);
return -EINVAL;
return 0;
}
-static int qcom_smem_count_mem_regions(struct platform_device *pdev)
+static int qcom_smem_map_memory(struct qcom_smem *smem, struct device *dev,
+ const char *name, int i)
{
- struct resource *res;
- int num_regions = 0;
- int i;
-
- for (i = 0; i < pdev->num_resources; i++) {
- res = &pdev->resource[i];
+ struct device_node *np;
+ struct resource r;
+ int ret;
- if (resource_type(res) == IORESOURCE_MEM)
- num_regions++;
+ np = of_parse_phandle(dev->of_node, name, 0);
+ if (!np) {
+ dev_err(dev, "No %s specified\n", name);
+ return -EINVAL;
}
- return num_regions;
+ ret = of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+ if (ret)
+ return ret;
+
+ smem->regions[i].aux_base = (u32)r.start;
+ smem->regions[i].size = resource_size(&r);
+ smem->regions[i].virt_base = devm_ioremap_nocache(dev, r.start,
+ resource_size(&r));
+ if (!smem->regions[i].virt_base)
+ return -ENOMEM;
+
+ return 0;
}
static int qcom_smem_probe(struct platform_device *pdev)
{
struct smem_header *header;
- struct device_node *np;
struct qcom_smem *smem;
- struct resource *res;
- struct resource r;
size_t array_size;
- int num_regions = 0;
+ int num_regions;
int hwlock_id;
u32 version;
int ret;
- int i;
- num_regions = qcom_smem_count_mem_regions(pdev) + 1;
+ num_regions = 1;
+ if (of_find_property(pdev->dev.of_node, "qcom,rpm-msg-ram", NULL))
+ num_regions++;
array_size = num_regions * sizeof(struct smem_region);
smem = devm_kzalloc(&pdev->dev, sizeof(*smem) + array_size, GFP_KERNEL);
smem->dev = &pdev->dev;
smem->num_regions = num_regions;
- np = of_parse_phandle(pdev->dev.of_node, "memory-region", 0);
- if (!np) {
- dev_err(&pdev->dev, "No memory-region specified\n");
- return -EINVAL;
- }
-
- ret = of_address_to_resource(np, 0, &r);
- of_node_put(np);
+ ret = qcom_smem_map_memory(smem, &pdev->dev, "memory-region", 0);
if (ret)
return ret;
- smem->regions[0].aux_base = (u32)r.start;
- smem->regions[0].size = resource_size(&r);
- smem->regions[0].virt_base = devm_ioremap_nocache(&pdev->dev,
- r.start,
- resource_size(&r));
- if (!smem->regions[0].virt_base)
- return -ENOMEM;
-
- for (i = 1; i < num_regions; i++) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, i - 1);
-
- smem->regions[i].aux_base = (u32)res->start;
- smem->regions[i].size = resource_size(res);
- smem->regions[i].virt_base = devm_ioremap_nocache(&pdev->dev,
- res->start,
- resource_size(res));
- if (!smem->regions[i].virt_base)
- return -ENOMEM;
- }
+ if (num_regions > 1 && (ret = qcom_smem_map_memory(smem, &pdev->dev,
+ "qcom,rpm-msg-ram", 1)))
+ return ret;
header = smem->regions[0].virt_base;
- if (header->initialized != 1 || header->reserved) {
+ if (le32_to_cpu(header->initialized) != 1 ||
+ le32_to_cpu(header->reserved)) {
dev_err(&pdev->dev, "SMEM is not initialized by SBL\n");
return -EINVAL;
}
static int qcom_smem_remove(struct platform_device *pdev)
{
- __smem = NULL;
hwspin_lock_free(__smem->hwlock);
+ __smem = NULL;
return 0;
}
--- /dev/null
+#
+# Rockchip Soc drivers
+#
+config ROCKCHIP_PM_DOMAINS
+ bool "Rockchip generic power domain"
+ depends on PM
+ select PM_GENERIC_DOMAINS
+ help
+ Say y here to enable power domain support.
+ In order to meet high performance and low power requirements, a power
+ management unit is designed or saving power when RK3288 in low power
+ mode. The RK3288 PMU is dedicated for managing the power of the whole chip.
+
+ If unsure, say N.
--- /dev/null
+#
+# Rockchip Soc drivers
+#
+obj-$(CONFIG_ROCKCHIP_PM_DOMAINS) += pm_domains.o
--- /dev/null
+/*
+ * Rockchip Generic power domain support.
+ *
+ * Copyright (c) 2015 ROCKCHIP, Co. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_domain.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/power/rk3288-power.h>
+
+struct rockchip_domain_info {
+ int pwr_mask;
+ int status_mask;
+ int req_mask;
+ int idle_mask;
+ int ack_mask;
+};
+
+struct rockchip_pmu_info {
+ u32 pwr_offset;
+ u32 status_offset;
+ u32 req_offset;
+ u32 idle_offset;
+ u32 ack_offset;
+
+ u32 core_pwrcnt_offset;
+ u32 gpu_pwrcnt_offset;
+
+ unsigned int core_power_transition_time;
+ unsigned int gpu_power_transition_time;
+
+ int num_domains;
+ const struct rockchip_domain_info *domain_info;
+};
+
+struct rockchip_pm_domain {
+ struct generic_pm_domain genpd;
+ const struct rockchip_domain_info *info;
+ struct rockchip_pmu *pmu;
+ int num_clks;
+ struct clk *clks[];
+};
+
+struct rockchip_pmu {
+ struct device *dev;
+ struct regmap *regmap;
+ const struct rockchip_pmu_info *info;
+ struct mutex mutex; /* mutex lock for pmu */
+ struct genpd_onecell_data genpd_data;
+ struct generic_pm_domain *domains[];
+};
+
+#define to_rockchip_pd(gpd) container_of(gpd, struct rockchip_pm_domain, genpd)
+
+#define DOMAIN(pwr, status, req, idle, ack) \
+{ \
+ .pwr_mask = BIT(pwr), \
+ .status_mask = BIT(status), \
+ .req_mask = BIT(req), \
+ .idle_mask = BIT(idle), \
+ .ack_mask = BIT(ack), \
+}
+
+#define DOMAIN_RK3288(pwr, status, req) \
+ DOMAIN(pwr, status, req, req, (req) + 16)
+
+static bool rockchip_pmu_domain_is_idle(struct rockchip_pm_domain *pd)
+{
+ struct rockchip_pmu *pmu = pd->pmu;
+ const struct rockchip_domain_info *pd_info = pd->info;
+ unsigned int val;
+
+ regmap_read(pmu->regmap, pmu->info->idle_offset, &val);
+ return (val & pd_info->idle_mask) == pd_info->idle_mask;
+}
+
+static int rockchip_pmu_set_idle_request(struct rockchip_pm_domain *pd,
+ bool idle)
+{
+ const struct rockchip_domain_info *pd_info = pd->info;
+ struct rockchip_pmu *pmu = pd->pmu;
+ unsigned int val;
+
+ regmap_update_bits(pmu->regmap, pmu->info->req_offset,
+ pd_info->req_mask, idle ? -1U : 0);
+
+ dsb(sy);
+
+ do {
+ regmap_read(pmu->regmap, pmu->info->ack_offset, &val);
+ } while ((val & pd_info->ack_mask) != (idle ? pd_info->ack_mask : 0));
+
+ while (rockchip_pmu_domain_is_idle(pd) != idle)
+ cpu_relax();
+
+ return 0;
+}
+
+static bool rockchip_pmu_domain_is_on(struct rockchip_pm_domain *pd)
+{
+ struct rockchip_pmu *pmu = pd->pmu;
+ unsigned int val;
+
+ regmap_read(pmu->regmap, pmu->info->status_offset, &val);
+
+ /* 1'b0: power on, 1'b1: power off */
+ return !(val & pd->info->status_mask);
+}
+
+static void rockchip_do_pmu_set_power_domain(struct rockchip_pm_domain *pd,
+ bool on)
+{
+ struct rockchip_pmu *pmu = pd->pmu;
+
+ regmap_update_bits(pmu->regmap, pmu->info->pwr_offset,
+ pd->info->pwr_mask, on ? 0 : -1U);
+
+ dsb(sy);
+
+ while (rockchip_pmu_domain_is_on(pd) != on)
+ cpu_relax();
+}
+
+static int rockchip_pd_power(struct rockchip_pm_domain *pd, bool power_on)
+{
+ int i;
+
+ mutex_lock(&pd->pmu->mutex);
+
+ if (rockchip_pmu_domain_is_on(pd) != power_on) {
+ for (i = 0; i < pd->num_clks; i++)
+ clk_enable(pd->clks[i]);
+
+ if (!power_on) {
+ /* FIXME: add code to save AXI_QOS */
+
+ /* if powering down, idle request to NIU first */
+ rockchip_pmu_set_idle_request(pd, true);
+ }
+
+ rockchip_do_pmu_set_power_domain(pd, power_on);
+
+ if (power_on) {
+ /* if powering up, leave idle mode */
+ rockchip_pmu_set_idle_request(pd, false);
+
+ /* FIXME: add code to restore AXI_QOS */
+ }
+
+ for (i = pd->num_clks - 1; i >= 0; i--)
+ clk_disable(pd->clks[i]);
+ }
+
+ mutex_unlock(&pd->pmu->mutex);
+ return 0;
+}
+
+static int rockchip_pd_power_on(struct generic_pm_domain *domain)
+{
+ struct rockchip_pm_domain *pd = to_rockchip_pd(domain);
+
+ return rockchip_pd_power(pd, true);
+}
+
+static int rockchip_pd_power_off(struct generic_pm_domain *domain)
+{
+ struct rockchip_pm_domain *pd = to_rockchip_pd(domain);
+
+ return rockchip_pd_power(pd, false);
+}
+
+static int rockchip_pd_attach_dev(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ struct clk *clk;
+ int i;
+ int error;
+
+ dev_dbg(dev, "attaching to power domain '%s'\n", genpd->name);
+
+ error = pm_clk_create(dev);
+ if (error) {
+ dev_err(dev, "pm_clk_create failed %d\n", error);
+ return error;
+ }
+
+ i = 0;
+ while ((clk = of_clk_get(dev->of_node, i++)) && !IS_ERR(clk)) {
+ dev_dbg(dev, "adding clock '%pC' to list of PM clocks\n", clk);
+ error = pm_clk_add_clk(dev, clk);
+ if (error) {
+ dev_err(dev, "pm_clk_add_clk failed %d\n", error);
+ clk_put(clk);
+ pm_clk_destroy(dev);
+ return error;
+ }
+ }
+
+ return 0;
+}
+
+static void rockchip_pd_detach_dev(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ dev_dbg(dev, "detaching from power domain '%s'\n", genpd->name);
+
+ pm_clk_destroy(dev);
+}
+
+static int rockchip_pm_add_one_domain(struct rockchip_pmu *pmu,
+ struct device_node *node)
+{
+ const struct rockchip_domain_info *pd_info;
+ struct rockchip_pm_domain *pd;
+ struct clk *clk;
+ int clk_cnt;
+ int i;
+ u32 id;
+ int error;
+
+ error = of_property_read_u32(node, "reg", &id);
+ if (error) {
+ dev_err(pmu->dev,
+ "%s: failed to retrieve domain id (reg): %d\n",
+ node->name, error);
+ return -EINVAL;
+ }
+
+ if (id >= pmu->info->num_domains) {
+ dev_err(pmu->dev, "%s: invalid domain id %d\n",
+ node->name, id);
+ return -EINVAL;
+ }
+
+ pd_info = &pmu->info->domain_info[id];
+ if (!pd_info) {
+ dev_err(pmu->dev, "%s: undefined domain id %d\n",
+ node->name, id);
+ return -EINVAL;
+ }
+
+ clk_cnt = of_count_phandle_with_args(node, "clocks", "#clock-cells");
+ pd = devm_kzalloc(pmu->dev,
+ sizeof(*pd) + clk_cnt * sizeof(pd->clks[0]),
+ GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+
+ pd->info = pd_info;
+ pd->pmu = pmu;
+
+ for (i = 0; i < clk_cnt; i++) {
+ clk = of_clk_get(node, i);
+ if (IS_ERR(clk)) {
+ error = PTR_ERR(clk);
+ dev_err(pmu->dev,
+ "%s: failed to get clk %pC (index %d): %d\n",
+ node->name, clk, i, error);
+ goto err_out;
+ }
+
+ error = clk_prepare(clk);
+ if (error) {
+ dev_err(pmu->dev,
+ "%s: failed to prepare clk %pC (index %d): %d\n",
+ node->name, clk, i, error);
+ clk_put(clk);
+ goto err_out;
+ }
+
+ pd->clks[pd->num_clks++] = clk;
+
+ dev_dbg(pmu->dev, "added clock '%pC' to domain '%s'\n",
+ clk, node->name);
+ }
+
+ error = rockchip_pd_power(pd, true);
+ if (error) {
+ dev_err(pmu->dev,
+ "failed to power on domain '%s': %d\n",
+ node->name, error);
+ goto err_out;
+ }
+
+ pd->genpd.name = node->name;
+ pd->genpd.power_off = rockchip_pd_power_off;
+ pd->genpd.power_on = rockchip_pd_power_on;
+ pd->genpd.attach_dev = rockchip_pd_attach_dev;
+ pd->genpd.detach_dev = rockchip_pd_detach_dev;
+ pd->genpd.flags = GENPD_FLAG_PM_CLK;
+ pm_genpd_init(&pd->genpd, NULL, false);
+
+ pmu->genpd_data.domains[id] = &pd->genpd;
+ return 0;
+
+err_out:
+ while (--i >= 0) {
+ clk_unprepare(pd->clks[i]);
+ clk_put(pd->clks[i]);
+ }
+ return error;
+}
+
+static void rockchip_pm_remove_one_domain(struct rockchip_pm_domain *pd)
+{
+ int i;
+
+ for (i = 0; i < pd->num_clks; i++) {
+ clk_unprepare(pd->clks[i]);
+ clk_put(pd->clks[i]);
+ }
+
+ /* protect the zeroing of pm->num_clks */
+ mutex_lock(&pd->pmu->mutex);
+ pd->num_clks = 0;
+ mutex_unlock(&pd->pmu->mutex);
+
+ /* devm will free our memory */
+}
+
+static void rockchip_pm_domain_cleanup(struct rockchip_pmu *pmu)
+{
+ struct generic_pm_domain *genpd;
+ struct rockchip_pm_domain *pd;
+ int i;
+
+ for (i = 0; i < pmu->genpd_data.num_domains; i++) {
+ genpd = pmu->genpd_data.domains[i];
+ if (genpd) {
+ pd = to_rockchip_pd(genpd);
+ rockchip_pm_remove_one_domain(pd);
+ }
+ }
+
+ /* devm will free our memory */
+}
+
+static void rockchip_configure_pd_cnt(struct rockchip_pmu *pmu,
+ u32 domain_reg_offset,
+ unsigned int count)
+{
+ /* First configure domain power down transition count ... */
+ regmap_write(pmu->regmap, domain_reg_offset, count);
+ /* ... and then power up count. */
+ regmap_write(pmu->regmap, domain_reg_offset + 4, count);
+}
+
+static int rockchip_pm_domain_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *node;
+ struct device *parent;
+ struct rockchip_pmu *pmu;
+ const struct of_device_id *match;
+ const struct rockchip_pmu_info *pmu_info;
+ int error;
+
+ if (!np) {
+ dev_err(dev, "device tree node not found\n");
+ return -ENODEV;
+ }
+
+ match = of_match_device(dev->driver->of_match_table, dev);
+ if (!match || !match->data) {
+ dev_err(dev, "missing pmu data\n");
+ return -EINVAL;
+ }
+
+ pmu_info = match->data;
+
+ pmu = devm_kzalloc(dev,
+ sizeof(*pmu) +
+ pmu_info->num_domains * sizeof(pmu->domains[0]),
+ GFP_KERNEL);
+ if (!pmu)
+ return -ENOMEM;
+
+ pmu->dev = &pdev->dev;
+ mutex_init(&pmu->mutex);
+
+ pmu->info = pmu_info;
+
+ pmu->genpd_data.domains = pmu->domains;
+ pmu->genpd_data.num_domains = pmu_info->num_domains;
+
+ parent = dev->parent;
+ if (!parent) {
+ dev_err(dev, "no parent for syscon devices\n");
+ return -ENODEV;
+ }
+
+ pmu->regmap = syscon_node_to_regmap(parent->of_node);
+
+ /*
+ * Configure power up and down transition delays for CORE
+ * and GPU domains.
+ */
+ rockchip_configure_pd_cnt(pmu, pmu_info->core_pwrcnt_offset,
+ pmu_info->core_power_transition_time);
+ rockchip_configure_pd_cnt(pmu, pmu_info->gpu_pwrcnt_offset,
+ pmu_info->gpu_power_transition_time);
+
+ error = -ENODEV;
+
+ for_each_available_child_of_node(np, node) {
+ error = rockchip_pm_add_one_domain(pmu, node);
+ if (error) {
+ dev_err(dev, "failed to handle node %s: %d\n",
+ node->name, error);
+ goto err_out;
+ }
+ }
+
+ if (error) {
+ dev_dbg(dev, "no power domains defined\n");
+ goto err_out;
+ }
+
+ of_genpd_add_provider_onecell(np, &pmu->genpd_data);
+
+ return 0;
+
+err_out:
+ rockchip_pm_domain_cleanup(pmu);
+ return error;
+}
+
+static const struct rockchip_domain_info rk3288_pm_domains[] = {
+ [RK3288_PD_VIO] = DOMAIN_RK3288(7, 7, 4),
+ [RK3288_PD_HEVC] = DOMAIN_RK3288(14, 10, 9),
+ [RK3288_PD_VIDEO] = DOMAIN_RK3288(8, 8, 3),
+ [RK3288_PD_GPU] = DOMAIN_RK3288(9, 9, 2),
+};
+
+static const struct rockchip_pmu_info rk3288_pmu = {
+ .pwr_offset = 0x08,
+ .status_offset = 0x0c,
+ .req_offset = 0x10,
+ .idle_offset = 0x14,
+ .ack_offset = 0x14,
+
+ .core_pwrcnt_offset = 0x34,
+ .gpu_pwrcnt_offset = 0x3c,
+
+ .core_power_transition_time = 24, /* 1us */
+ .gpu_power_transition_time = 24, /* 1us */
+
+ .num_domains = ARRAY_SIZE(rk3288_pm_domains),
+ .domain_info = rk3288_pm_domains,
+};
+
+static const struct of_device_id rockchip_pm_domain_dt_match[] = {
+ {
+ .compatible = "rockchip,rk3288-power-controller",
+ .data = (void *)&rk3288_pmu,
+ },
+ { /* sentinel */ },
+};
+
+static struct platform_driver rockchip_pm_domain_driver = {
+ .probe = rockchip_pm_domain_probe,
+ .driver = {
+ .name = "rockchip-pm-domain",
+ .of_match_table = rockchip_pm_domain_dt_match,
+ /*
+ * We can't forcibly eject devices form power domain,
+ * so we can't really remove power domains once they
+ * were added.
+ */
+ .suppress_bind_attrs = true,
+ },
+};
+
+static int __init rockchip_pm_domain_drv_register(void)
+{
+ return platform_driver_register(&rockchip_pm_domain_driver);
+}
+postcore_initcall(rockchip_pm_domain_drv_register);
};
void __iomem *intd;
u32 __iomem *iram;
- const char *firmware;
u32 id;
struct list_head list;
+ bool loaded;
+ bool started;
};
struct knav_qmgr_info {
if (old && !new) {
dev_dbg(kdev->dev, "setup-acc-irq: freeing %s for channel %s\n",
acc->name, acc->name);
+ ret = irq_set_affinity_hint(irq, NULL);
+ if (ret)
+ dev_warn(range->kdev->dev,
+ "Failed to set IRQ affinity\n");
free_irq(irq, range);
}
* Return 0 on success or error
*/
int knav_init_acc_range(struct knav_device *kdev,
- struct device_node *node,
- struct knav_range_info *range)
+ struct device_node *node,
+ struct knav_range_info *range)
{
struct knav_acc_channel *acc;
struct knav_pdsp_info *pdsp;
return -EINVAL;
}
+ if (!pdsp->started) {
+ dev_err(kdev->dev, "pdsp id %d not started for range %s\n",
+ info->pdsp_id, range->name);
+ return -ENODEV;
+ }
+
info->pdsp = pdsp;
channels = range->num_queues;
if (of_get_property(node, "multi-queue", NULL)) {
idx < (kdev)->num_queues_in_use; \
idx++, inst = knav_queue_idx_to_inst(kdev, idx))
+/* All firmware file names end up here. List the firmware file names below.
+ * Newest followed by older ones. Search is done from start of the array
+ * until a firmware file is found.
+ */
+const char *knav_acc_firmwares[] = {"ks2_qmss_pdsp_acc48.bin"};
+
/**
* knav_queue_notify: qmss queue notfier call
*
struct device *dev = kdev->dev;
struct knav_pdsp_info *pdsp;
struct device_node *child;
- int ret;
for_each_child_of_node(pdsps, child) {
pdsp = devm_kzalloc(dev, sizeof(*pdsp), GFP_KERNEL);
return -ENOMEM;
}
pdsp->name = knav_queue_find_name(child);
- ret = of_property_read_string(child, "firmware",
- &pdsp->firmware);
- if (ret < 0 || !pdsp->firmware) {
- dev_err(dev, "unknown firmware for pdsp %s\n",
- pdsp->name);
- devm_kfree(dev, pdsp);
- continue;
- }
- dev_dbg(dev, "pdsp name %s fw name :%s\n", pdsp->name,
- pdsp->firmware);
-
pdsp->iram =
knav_queue_map_reg(kdev, child,
KNAV_QUEUE_PDSP_IRAM_REG_INDEX);
}
of_property_read_u32(child, "id", &pdsp->id);
list_add_tail(&pdsp->list, &kdev->pdsps);
- dev_dbg(dev, "added pdsp %s: command %p, iram %p, regs %p, intd %p, firmware %s\n",
+ dev_dbg(dev, "added pdsp %s: command %p, iram %p, regs %p, intd %p\n",
pdsp->name, pdsp->command, pdsp->iram, pdsp->regs,
- pdsp->intd, pdsp->firmware);
+ pdsp->intd);
}
return 0;
}
dev_err(kdev->dev, "timed out on pdsp %s stop\n", pdsp->name);
return ret;
}
+ pdsp->loaded = false;
+ pdsp->started = false;
return 0;
}
{
int i, ret, fwlen;
const struct firmware *fw;
+ bool found = false;
u32 *fwdata;
- ret = request_firmware(&fw, pdsp->firmware, kdev->dev);
- if (ret) {
- dev_err(kdev->dev, "failed to get firmware %s for pdsp %s\n",
- pdsp->firmware, pdsp->name);
- return ret;
+ for (i = 0; i < ARRAY_SIZE(knav_acc_firmwares); i++) {
+ if (knav_acc_firmwares[i]) {
+ ret = request_firmware(&fw,
+ knav_acc_firmwares[i],
+ kdev->dev);
+ if (!ret) {
+ found = true;
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ dev_err(kdev->dev, "failed to get firmware for pdsp\n");
+ return -ENODEV;
}
+
+ dev_info(kdev->dev, "firmware file %s downloaded for PDSP\n",
+ knav_acc_firmwares[i]);
+
writel_relaxed(pdsp->id + 1, pdsp->command + 0x18);
/* download the firmware */
fwdata = (u32 *)fw->data;
int ret;
knav_queue_stop_pdsps(kdev);
- /* now load them all */
+ /* now load them all. We return success even if pdsp
+ * is not loaded as acc channels are optional on having
+ * firmware availability in the system. We set the loaded
+ * and stated flag and when initialize the acc range, check
+ * it and init the range only if pdsp is started.
+ */
for_each_pdsp(kdev, pdsp) {
ret = knav_queue_load_pdsp(kdev, pdsp);
- if (ret < 0)
- return ret;
+ if (!ret)
+ pdsp->loaded = true;
}
for_each_pdsp(kdev, pdsp) {
- ret = knav_queue_start_pdsp(kdev, pdsp);
- WARN_ON(ret);
+ if (pdsp->loaded) {
+ ret = knav_queue_start_pdsp(kdev, pdsp);
+ if (!ret)
+ pdsp->started = true;
+ }
}
return 0;
}
#define CLKID_SMEMC 24
#define CLKID_PCIE 25
#define CLKID_TWD 26
+#define CLKID_CPU 27
--- /dev/null
+#ifndef __DT_BINDINGS_POWER_RK3288_POWER_H__
+#define __DT_BINDINGS_POWER_RK3288_POWER_H__
+
+/**
+ * RK3288 Power Domain and Voltage Domain Summary.
+ */
+
+/* VD_CORE */
+#define RK3288_PD_A17_0 0
+#define RK3288_PD_A17_1 1
+#define RK3288_PD_A17_2 2
+#define RK3288_PD_A17_3 3
+#define RK3288_PD_SCU 4
+#define RK3288_PD_DEBUG 5
+#define RK3288_PD_MEM 6
+
+/* VD_LOGIC */
+#define RK3288_PD_BUS 7
+#define RK3288_PD_PERI 8
+#define RK3288_PD_VIO 9
+#define RK3288_PD_ALIVE 10
+#define RK3288_PD_HEVC 11
+#define RK3288_PD_VIDEO 12
+
+/* VD_GPU */
+#define RK3288_PD_GPU 13
+
+/* VD_PMU */
+#define RK3288_PD_PMU 14
+
+#endif
const struct atmel_tcb_config *tcb_config;
int irq[3];
struct clk *clk[3];
+ struct clk *slow_clk;
struct list_head node;
bool allocated;
};
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/i2c.h>
-#include <linux/leds.h>
-#include <linux/spi/spi.h>
-#include <linux/usb/atmel_usba_udc.h>
-#include <linux/atmel-mci.h>
-#include <sound/atmel-ac97c.h>
#include <linux/serial.h>
-#include <linux/platform_data/macb.h>
/*
* at91: 6 USARTs and one DBGU port (SAM9260)
u32 val;
};
+extern bool qcom_scm_is_available(void);
+
extern bool qcom_scm_hdcp_available(void);
extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
u32 *resp);
--- /dev/null
+/*
+ * SCPI Message Protocol driver header
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/types.h>
+
+struct scpi_opp {
+ u32 freq;
+ u32 m_volt;
+} __packed;
+
+struct scpi_dvfs_info {
+ unsigned int count;
+ unsigned int latency; /* in nanoseconds */
+ struct scpi_opp *opps;
+};
+
+enum scpi_sensor_class {
+ TEMPERATURE,
+ VOLTAGE,
+ CURRENT,
+ POWER,
+};
+
+struct scpi_sensor_info {
+ u16 sensor_id;
+ u8 class;
+ u8 trigger_type;
+ char name[20];
+} __packed;
+
+/**
+ * struct scpi_ops - represents the various operations provided
+ * by SCP through SCPI message protocol
+ * @get_version: returns the major and minor revision on the SCPI
+ * message protocol
+ * @clk_get_range: gets clock range limit(min - max in Hz)
+ * @clk_get_val: gets clock value(in Hz)
+ * @clk_set_val: sets the clock value, setting to 0 will disable the
+ * clock (if supported)
+ * @dvfs_get_idx: gets the Operating Point of the given power domain.
+ * OPP is an index to the list return by @dvfs_get_info
+ * @dvfs_set_idx: sets the Operating Point of the given power domain.
+ * OPP is an index to the list return by @dvfs_get_info
+ * @dvfs_get_info: returns the DVFS capabilities of the given power
+ * domain. It includes the OPP list and the latency information
+ */
+struct scpi_ops {
+ u32 (*get_version)(void);
+ int (*clk_get_range)(u16, unsigned long *, unsigned long *);
+ unsigned long (*clk_get_val)(u16);
+ int (*clk_set_val)(u16, unsigned long);
+ int (*dvfs_get_idx)(u8);
+ int (*dvfs_set_idx)(u8, u8);
+ struct scpi_dvfs_info *(*dvfs_get_info)(u8);
+ int (*sensor_get_capability)(u16 *sensors);
+ int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *);
+ int (*sensor_get_value)(u16, u32 *);
+};
+
+#if IS_ENABLED(CONFIG_ARM_SCPI_PROTOCOL)
+struct scpi_ops *get_scpi_ops(void);
+#else
+static inline struct scpi_ops *get_scpi_ops(void) { return NULL; }
+#endif
--- /dev/null
+#ifndef __BRCMSTB_SOC_H
+#define __BRCMSTB_SOC_H
+
+/*
+ * Bus Interface Unit control register setup, must happen early during boot,
+ * before SMP is brought up, called by machine entry point.
+ */
+void brcmstb_biuctrl_init(void);
+
+#endif /* __BRCMSTB_SOC_H */
struct qcom_smd_channel;
struct qcom_smd_lookup;
+/**
+ * struct qcom_smd_id - struct used for matching a smd device
+ * @name: name of the channel
+ */
+struct qcom_smd_id {
+ char name[20];
+};
+
/**
* struct qcom_smd_device - smd device struct
* @dev: the device struct
/**
* struct qcom_smd_driver - smd driver struct
* @driver: underlying device driver
+ * @smd_match_table: static channel match table
* @probe: invoked when the smd channel is found
* @remove: invoked when the smd channel is closed
* @callback: invoked when an inbound message is received on the channel,
*/
struct qcom_smd_driver {
struct device_driver driver;
+ const struct qcom_smd_id *smd_match_table;
+
int (*probe)(struct qcom_smd_device *dev);
void (*remove)(struct qcom_smd_device *dev);
int (*callback)(struct qcom_smd_device *, const void *, size_t);
#define QCOM_SMEM_HOST_ANY -1
int qcom_smem_alloc(unsigned host, unsigned item, size_t size);
-int qcom_smem_get(unsigned host, unsigned item, void **ptr, size_t *size);
+void *qcom_smem_get(unsigned host, unsigned item, size_t *size);
int qcom_smem_get_free_space(unsigned host);
--- /dev/null
+/*
+ * Copyright © 2014 NVIDIA Corporation
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_BRCMSTB_COMMON_H__
+#define __SOC_BRCMSTB_COMMON_H__
+
+bool soc_is_brcmstb(void);
+
+#endif /* __SOC_BRCMSTB_COMMON_H__ */
projects / karo-tx-linux.git / commitdiff