!Iinclude/media/v4l2-dv-timings.h
!Iinclude/media/v4l2-event.h
!Iinclude/media/v4l2-flash-led-class.h
+!Iinclude/media/v4l2-mc.h
!Iinclude/media/v4l2-mediabus.h
!Iinclude/media/v4l2-mem2mem.h
!Iinclude/media/v4l2-of.h
<refsect1>
<title>Description</title>
-
- <para><emphasis role="bold">NOTE:</emphasis> This new ioctl is programmed to be added on Kernel 4.6. Its definition/arguments may change until its final version.</para>
-
<para>The typical usage of this ioctl is to call it twice.
On the first call, the structure defined at &media-v2-topology; should
be zeroed. At return, if no errors happen, this ioctl will return the
</row>
<row>
<entry><constant>MEDIA_ENT_F_TUNER</constant></entry>
- <entry>Digital TV, analog TV, radio and/or software radio tuner.</entry>
+ <entry>Digital TV, analog TV, radio and/or software radio tuner,
+ with consists on a PLL tuning stage that converts radio
+ frequency (RF) signal into an Intermediate Frequency (IF).
+ Modern tuners have internally IF-PLL decoders for audio
+ and video, but older models have those stages implemented
+ on separate entities.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>MEDIA_ENT_F_IF_VID_DECODER</constant></entry>
+ <entry>IF-PLL video decoder. It receives the IF from a PLL
+ and decodes the analog TV video signal. This is commonly
+ found on some very old analog tuners, like Philips MK3
+ designs. They all contain a tda9887 (or some software
+ compatible similar chip, like tda9885). Those devices
+ use a different I2C address than the tuner PLL.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>MEDIA_ENT_F_IF_AUD_DECODER</constant></entry>
+ <entry>IF-PLL sound decoder. It receives the IF from a PLL
+ and decodes the analog TV audio signal. This is commonly
+ found on some very old analog hardware, like Micronas
+ msp3400, Philips tda9840, tda985x, etc. Those devices
+ use a different I2C address than the tuner PLL and
+ should be controlled together with the IF-PLL video
+ decoder.
+ </entry>
</row>
</tbody>
</tgroup>
- <refentry id="V4L2-PIX-FMT-YUV420M">
+ <refentry>
<refmeta>
- <refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
+ <refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12'), V4L2_PIX_FMT_YVU420M ('YM21')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>
- <refname> <constant>V4L2_PIX_FMT_YUV420M</constant></refname>
- <refpurpose>Variation of <constant>V4L2_PIX_FMT_YUV420</constant>
- with planes non contiguous in memory. </refpurpose>
+ <refname id="V4L2-PIX-FMT-YUV420M"><constant>V4L2_PIX_FMT_YUV420M</constant></refname>
+ <refname id="V4L2-PIX-FMT-YVU420M"><constant>V4L2_PIX_FMT_YVU420M</constant></refname>
+ <refpurpose>Variation of <constant>V4L2_PIX_FMT_YUV420</constant> and
+ <constant>V4L2_PIX_FMT_YVU420</constant> with planes non contiguous
+ in memory.</refpurpose>
</refnamediv>
<refsect1>
<title>Description</title>
<para>This is a multi-planar format, as opposed to a packed format.
-The three components are separated into three sub- images or planes.
+The three components are separated into three sub-images or planes.</para>
-The Y plane is first. The Y plane has one byte per pixel. The Cb data
+ <para>The Y plane is first. The Y plane has one byte per pixel.
+For <constant>V4L2_PIX_FMT_YUV420M</constant> the Cb data
constitutes the second plane which is half the width and half
the height of the Y plane (and of the image). Each Cb belongs to four
pixels, a two-by-two square of the image. For example,
Cb<subscript>0</subscript> belongs to Y'<subscript>00</subscript>,
Y'<subscript>01</subscript>, Y'<subscript>10</subscript>, and
Y'<subscript>11</subscript>. The Cr data, just like the Cb plane, is
-in the third plane. </para>
+in the third plane.</para>
+
+ <para><constant>V4L2_PIX_FMT_YVU420M</constant> is the same except
+the Cr data is stored in the second plane and the Cb data in the third plane.
+</para>
<para>If the Y plane has pad bytes after each row, then the Cb
and Cr planes have half as many pad bytes after their rows. In other
words, two Cx rows (including padding) is exactly as long as one Y row
(including padding).</para>
- <para><constant>V4L2_PIX_FMT_YUV420M</constant> is intended to be
+ <para><constant>V4L2_PIX_FMT_YUV420M</constant> and
+<constant>V4L2_PIX_FMT_YVU420M</constant> are intended to be
used only in drivers and applications that support the multi-planar API,
described in <xref linkend="planar-apis"/>. </para>
+++ /dev/null
- <refentry id="V4L2-PIX-FMT-YVU420M">
- <refmeta>
- <refentrytitle>V4L2_PIX_FMT_YVU420M ('YM21')</refentrytitle>
- &manvol;
- </refmeta>
- <refnamediv>
- <refname> <constant>V4L2_PIX_FMT_YVU420M</constant></refname>
- <refpurpose>Variation of <constant>V4L2_PIX_FMT_YVU420</constant>
- with planes non contiguous in memory. </refpurpose>
- </refnamediv>
-
- <refsect1>
- <title>Description</title>
-
- <para>This is a multi-planar format, as opposed to a packed format.
-The three components are separated into three sub-images or planes.
-
-The Y plane is first. The Y plane has one byte per pixel. The Cr data
-constitutes the second plane which is half the width and half
-the height of the Y plane (and of the image). Each Cr belongs to four
-pixels, a two-by-two square of the image. For example,
-Cr<subscript>0</subscript> belongs to Y'<subscript>00</subscript>,
-Y'<subscript>01</subscript>, Y'<subscript>10</subscript>, and
-Y'<subscript>11</subscript>. The Cb data, just like the Cr plane, constitutes
-the third plane. </para>
-
- <para>If the Y plane has pad bytes after each row, then the Cr
-and Cb planes have half as many pad bytes after their rows. In other
-words, two Cx rows (including padding) is exactly as long as one Y row
-(including padding).</para>
-
- <para><constant>V4L2_PIX_FMT_YVU420M</constant> is intended to be
-used only in drivers and applications that support the multi-planar API,
-described in <xref linkend="planar-apis"/>. </para>
-
- <example>
- <title><constant>V4L2_PIX_FMT_YVU420M</constant> 4 × 4
-pixel image</title>
-
- <formalpara>
- <title>Byte Order.</title>
- <para>Each cell is one byte.
- <informaltable frame="none">
- <tgroup cols="5" align="center">
- <colspec align="left" colwidth="2*" />
- <tbody valign="top">
- <row>
- <entry>start0 + 0:</entry>
- <entry>Y'<subscript>00</subscript></entry>
- <entry>Y'<subscript>01</subscript></entry>
- <entry>Y'<subscript>02</subscript></entry>
- <entry>Y'<subscript>03</subscript></entry>
- </row>
- <row>
- <entry>start0 + 4:</entry>
- <entry>Y'<subscript>10</subscript></entry>
- <entry>Y'<subscript>11</subscript></entry>
- <entry>Y'<subscript>12</subscript></entry>
- <entry>Y'<subscript>13</subscript></entry>
- </row>
- <row>
- <entry>start0 + 8:</entry>
- <entry>Y'<subscript>20</subscript></entry>
- <entry>Y'<subscript>21</subscript></entry>
- <entry>Y'<subscript>22</subscript></entry>
- <entry>Y'<subscript>23</subscript></entry>
- </row>
- <row>
- <entry>start0 + 12:</entry>
- <entry>Y'<subscript>30</subscript></entry>
- <entry>Y'<subscript>31</subscript></entry>
- <entry>Y'<subscript>32</subscript></entry>
- <entry>Y'<subscript>33</subscript></entry>
- </row>
- <row><entry></entry></row>
- <row>
- <entry>start1 + 0:</entry>
- <entry>Cr<subscript>00</subscript></entry>
- <entry>Cr<subscript>01</subscript></entry>
- </row>
- <row>
- <entry>start1 + 2:</entry>
- <entry>Cr<subscript>10</subscript></entry>
- <entry>Cr<subscript>11</subscript></entry>
- </row>
- <row><entry></entry></row>
- <row>
- <entry>start2 + 0:</entry>
- <entry>Cb<subscript>00</subscript></entry>
- <entry>Cb<subscript>01</subscript></entry>
- </row>
- <row>
- <entry>start2 + 2:</entry>
- <entry>Cb<subscript>10</subscript></entry>
- <entry>Cb<subscript>11</subscript></entry>
- </row>
- </tbody>
- </tgroup>
- </informaltable>
- </para>
- </formalpara>
-
- <formalpara>
- <title>Color Sample Location.</title>
- <para>
- <informaltable frame="none">
- <tgroup cols="7" align="center">
- <tbody valign="top">
- <row>
- <entry></entry>
- <entry>0</entry><entry></entry><entry>1</entry><entry></entry>
- <entry>2</entry><entry></entry><entry>3</entry>
- </row>
- <row>
- <entry>0</entry>
- <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
- <entry>Y</entry><entry></entry><entry>Y</entry>
- </row>
- <row>
- <entry></entry>
- <entry></entry><entry>C</entry><entry></entry><entry></entry>
- <entry></entry><entry>C</entry><entry></entry>
- </row>
- <row>
- <entry>1</entry>
- <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
- <entry>Y</entry><entry></entry><entry>Y</entry>
- </row>
- <row>
- <entry></entry>
- </row>
- <row>
- <entry>2</entry>
- <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
- <entry>Y</entry><entry></entry><entry>Y</entry>
- </row>
- <row>
- <entry></entry>
- <entry></entry><entry>C</entry><entry></entry><entry></entry>
- <entry></entry><entry>C</entry><entry></entry>
- </row>
- <row>
- <entry>3</entry>
- <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
- <entry>Y</entry><entry></entry><entry>Y</entry>
- </row>
- </tbody>
- </tgroup>
- </informaltable>
- </para>
- </formalpara>
- </example>
- </refsect1>
- </refentry>
&sub-y41p;
&sub-yuv420;
&sub-yuv420m;
- &sub-yvu420m;
&sub-yuv410;
&sub-yuv422p;
&sub-yuv411p;
automatically, similar to sensing the video standard. To do so, applications
call <constant>VIDIOC_QUERY_DV_TIMINGS</constant> with a pointer to a
&v4l2-dv-timings;. Once the hardware detects the timings, it will fill in the
-timings structure.
+timings structure.</para>
-If the timings could not be detected because there was no signal, then
+<para>Please note that drivers shall <emphasis>not</emphasis> switch timings automatically
+if new timings are detected. Instead, drivers should send the
+<constant>V4L2_EVENT_SOURCE_CHANGE</constant> event (if they support this) and expect
+that userspace will take action by calling <constant>VIDIOC_QUERY_DV_TIMINGS</constant>.
+The reason is that new timings usually mean different buffer sizes as well, and you
+cannot change buffer sizes on the fly. In general, applications that receive the
+Source Change event will have to call <constant>VIDIOC_QUERY_DV_TIMINGS</constant>,
+and if the detected timings are valid they will have to stop streaming, set the new
+timings, allocate new buffers and start streaming again.</para>
+
+<para>If the timings could not be detected because there was no signal, then
<errorcode>ENOLINK</errorcode> is returned. If a signal was detected, but
it was unstable and the receiver could not lock to the signal, then
<errorcode>ENOLCK</errorcode> is returned. If the receiver could lock to the signal,
possible or fails, the set must contain all standards supported by the
current video input or output.</para>
+<para>Please note that drivers shall <emphasis>not</emphasis> switch the video standard
+automatically if a new video standard is detected. Instead, drivers should send the
+<constant>V4L2_EVENT_SOURCE_CHANGE</constant> event (if they support this) and expect
+that userspace will take action by calling <constant>VIDIOC_QUERYSTD</constant>.
+The reason is that a new video standard can mean different buffer sizes as well, and you
+cannot change buffer sizes on the fly. In general, applications that receive the
+Source Change event will have to call <constant>VIDIOC_QUERYSTD</constant>,
+and if the detected video standard is valid they will have to stop streaming, set the new
+standard, allocate new buffers and start streaming again.</para>
+
</refsect1>
<refsect1>
- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
expressed as a 64-bit big-endian integer.
+- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
+- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
For further reading on port node refer to
Documentation/devicetree/bindings/media/video-interfaces.txt.
--- /dev/null
+* Texas Instruments TVP5150 and TVP5151 video decoders
+
+The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
+(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV
+with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
+
+Required Properties:
+- compatible: value must be "ti,tvp5150"
+- reg: I2C slave address
+
+Optional Properties:
+- pdn-gpios: phandle for the GPIO connected to the PDN pin, if any.
+- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required Endpoint Properties for parallel synchronization:
+
+- hsync-active: active state of the HSYNC signal. Must be <1> (HIGH).
+- vsync-active: active state of the VSYNC signal. Must be <1> (HIGH).
+- field-even-active: field signal level during the even field data
+ transmission. Must be <0>.
+
+If none of hsync-active, vsync-active and field-even-active is specified,
+the endpoint is assumed to use embedded BT.656 synchronization.
+
+Example:
+
+&i2c2 {
+ ...
+ tvp5150@5c {
+ compatible = "ti,tvp5150";
+ reg = <0x5c>;
+ pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+
+ port {
+ tvp5150_1: endpoint {
+ remote-endpoint = <&ccdc_ep>;
+ };
+ };
+ };
+};
channel which can be either RGB, YUYV or BT656.
- compatible: Must be one of the following
+ - "renesas,vin-r8a7795" for the R8A7795 device
- "renesas,vin-r8a7794" for the R8A7794 device
- "renesas,vin-r8a7793" for the R8A7793 device
- "renesas,vin-r8a7791" for the R8A7791 device
can encode image data and decode JPEG data quickly.
Required properties:
- - compatible: should containg one of the following:
- - "renesas,jpu-r8a7790" for R-Car H2
- - "renesas,jpu-r8a7791" for R-Car M2-W
- - "renesas,jpu-r8a7792" for R-Car V2H
- - "renesas,jpu-r8a7793" for R-Car M2-N
+- compatible: "renesas,jpu-<soctype>", "renesas,rcar-gen2-jpu" as fallback.
+ Examples with soctypes are:
+ - "renesas,jpu-r8a7790" for R-Car H2
+ - "renesas,jpu-r8a7791" for R-Car M2-W
+ - "renesas,jpu-r8a7792" for R-Car V2H
+ - "renesas,jpu-r8a7793" for R-Car M2-N
- reg: Base address and length of the registers block for the JPU.
- interrupts: JPU interrupt specifier.
Example: R8A7790 (R-Car H2) JPU node
jpeg-codec@fe980000 {
- compatible = "renesas,jpu-r8a7790";
+ compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
reg = <0 0xfe980000 0 0x10300>;
interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_JPU>;
--- /dev/null
+Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
+------------------------------------------------------
+
+The Camera Adaptation Layer (CAL) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect CSI2 image-sensor modules to the
+DRA72x device.
+
+Required properties:
+- compatible: must be "ti,dra72-cal"
+- reg: CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX
+ control address space
+- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control
+ registers
+- interrupts: should contain IRQ line for the CAL;
+
+CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
+should contain a 'port' child node with child 'endpoint' node. Please
+refer to the bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+ cal: cal@4845b000 {
+ compatible = "ti,dra72-cal";
+ ti,hwmods = "cal";
+ reg = <0x4845B000 0x400>,
+ <0x4845B800 0x40>,
+ <0x4845B900 0x40>,
+ <0x4A002e94 0x4>;
+ reg-names = "cal_top",
+ "cal_rx_core0",
+ "cal_rx_core1",
+ "camerrx_control";
+ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ csi2_0: port@0 {
+ reg = <0>;
+ endpoint {
+ slave-mode;
+ remote-endpoint = <&ar0330_1>;
+ };
+ };
+ csi2_1: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ i2c5: i2c@4807c000 {
+ ar0330@10 {
+ compatible = "ti,ar0330";
+ reg = <0x10>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ar0330_1: endpoint {
+ reg = <0>;
+ clock-lanes = <1>;
+ data-lanes = <0 2 3 4>;
+ remote-endpoint = <&csi2_0>;
+ };
+ };
+ };
+ };
Patches, comments and suggestions are very very welcome.
3. Acknowledgements
- Amaury Demol (ademol@dibcom.fr) and Francois Kanounnikoff from DiBcom for
+ Amaury Demol (Amaury.Demol@parrot.com) and Francois Kanounnikoff from DiBcom for
providing specs, code and help, on which the dvb-dibusb, dib3000mb and
dib3000mc are based.
S: Maintained
F: drivers/thermal/ti-soc-thermal/
+TI VPE/CAL DRIVERS
+M: Benoit Parrot <bparrot@ti.com>
+L: linux-media@vger.kernel.org
+W: http://linuxtv.org/
+Q: http://patchwork.linuxtv.org/project/linux-media/list/
+S: Maintained
+F: drivers/media/platform/ti-vpe/
+
TI CDCE706 CLOCK DRIVER
M: Max Filippov <jcmvbkbc@gmail.com>
S: Maintained
#endif
/* lnb control */
-#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
+#if (FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)) && FE_SUPPORTED(PLL)
static int flexcop_set_voltage(struct dvb_frontend *fe,
enum fe_sec_voltage voltage)
{
#endif
#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
-static int flexcop_sleep(struct dvb_frontend* fe)
+static int __maybe_unused flexcop_sleep(struct dvb_frontend* fe)
{
struct flexcop_device *fc = fe->dvb->priv;
if (fc->fe_sleep)
/*
* Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
* flexcop.c - main module part
- * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2004-9 Patrick Boettcher <patrick.boettcher@posteo.de>
* based on skystar2-driver Copyright (C) 2003 Vadim Catana, skystar@moldova.cc
*
* Acknowledgements:
#include "flexcop.h"
#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip"
-#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@posteo.de"
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
#define DEBSTATUS ""
/* cypress_firmware.c is part of the DVB USB library.
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* This file contains functions for downloading the firmware to Cypress FX 1
/*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* This file contains functions for downloading the firmware to Cypress FX 1
/* dvb-usb-ids.h is part of the DVB USB library.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) see
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de) see
* dvb-usb-init.c for copyright information.
*
* a header file containing define's for the USB device supported by the
#define USB_PID_DIBCOM_STK807XP 0x1f90
#define USB_PID_DIBCOM_STK807XPVR 0x1f98
#define USB_PID_DIBCOM_STK8096GP 0x1fa0
+#define USB_PID_DIBCOM_STK8096PVR 0x1faa
#define USB_PID_DIBCOM_NIM8096MD 0x1fa8
#define USB_PID_DIBCOM_TFE8096P 0x1f9C
#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
#define USB_PID_TECHNOTREND_CONNECT_CT3650 0x300d
#define USB_PID_TECHNOTREND_CONNECT_S2_4600 0x3011
#define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI 0x3012
+#define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI_2 0x3015
#define USB_PID_TECHNOTREND_TVSTICK_CT2_4400 0x3014
#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a
#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081
#define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062
#define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078
#define USB_PID_TERRATEC_CINERGY_T_XXS_2 0x00ab
+#define USB_PID_TERRATEC_CINERGY_S2_R1 0x00a8
+#define USB_PID_TERRATEC_CINERGY_S2_R2 0x00b0
+#define USB_PID_TERRATEC_CINERGY_S2_R3 0x0102
+#define USB_PID_TERRATEC_CINERGY_S2_R4 0x0105
#define USB_PID_TERRATEC_H7 0x10b4
#define USB_PID_TERRATEC_H7_2 0x10a3
#define USB_PID_TERRATEC_H7_3 0x10a5
s32 delta;
*waketime = ktime_add_us(*waketime, add_usec);
- delta = ktime_us_delta(ktime_get_real(), *waketime);
+ delta = ktime_us_delta(ktime_get_boottime(), *waketime);
if (delta > 2500) {
msleep((delta - 1500) / 1000);
- delta = ktime_us_delta(ktime_get_real(), *waketime);
+ delta = ktime_us_delta(ktime_get_boottime(), *waketime);
}
if (delta > 0)
udelay(delta);
_DTV_CMD(DTV_STAT_TOTAL_BLOCK_COUNT, 0, 0),
};
-static void dtv_property_dump(struct dvb_frontend *fe, struct dtv_property *tvp)
+static void dtv_property_dump(struct dvb_frontend *fe,
+ bool is_set,
+ struct dtv_property *tvp)
{
int i;
if (tvp->cmd <= 0 || tvp->cmd > DTV_MAX_COMMAND) {
- dev_warn(fe->dvb->device, "%s: tvp.cmd = 0x%08x undefined\n",
- __func__, tvp->cmd);
+ dev_warn(fe->dvb->device, "%s: %s tvp.cmd = 0x%08x undefined\n",
+ __func__,
+ is_set ? "SET" : "GET",
+ tvp->cmd);
return;
}
- dev_dbg(fe->dvb->device, "%s: tvp.cmd = 0x%08x (%s)\n", __func__,
- tvp->cmd, dtv_cmds[tvp->cmd].name);
+ dev_dbg(fe->dvb->device, "%s: %s tvp.cmd = 0x%08x (%s)\n", __func__,
+ is_set ? "SET" : "GET",
+ tvp->cmd,
+ dtv_cmds[tvp->cmd].name);
if (dtv_cmds[tvp->cmd].buffer) {
dev_dbg(fe->dvb->device, "%s: tvp.u.buffer.len = 0x%02x\n",
return r;
}
- dtv_property_dump(fe, tvp);
+ dtv_property_dump(fe, false, tvp);
return 0;
}
return r;
}
+ dtv_property_dump(fe, true, tvp);
+
switch(tvp->cmd) {
case DTV_CLEAR:
/*
u8 last = 1;
if (dvb_frontend_debug)
printk("%s switch command: 0x%04lx\n", __func__, swcmd);
- nexttime = ktime_get_real();
+ nexttime = ktime_get_boottime();
if (dvb_frontend_debug)
tv[0] = nexttime;
/* before sending a command, initialize by sending
for (i = 0; i < 9; i++) {
if (dvb_frontend_debug)
- tv[i+1] = ktime_get_real();
+ tv[i+1] = ktime_get_boottime();
if ((swcmd & 0x01) != last) {
/* set voltage to (last ? 13V : 18V) */
fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
#define DVB_MAX_IDS MAX_DVB_MINORS
#else
#define DVB_MAX_IDS 4
-#define nums2minor(num,type,id) ((num << 6) | (id << 4) | type)
+#define nums2minor(num, type, id) ((num << 6) | (id << 4) | type)
#define MAX_DVB_MINORS (DVB_MAX_ADAPTERS*64)
#endif
file->private_data = dvbdev;
replace_fops(file, new_fops);
if (file->f_op->open)
- err = file->f_op->open(inode,file);
+ err = file->f_op->open(inode, file);
up_read(&minor_rwsem);
mutex_unlock(&dvbdev_mutex);
return err;
ret = media_device_register_entity(dvbdev->adapter->mdev,
dvbdev->entity);
if (ret)
- return (ret);
+ return ret;
printk(KERN_DEBUG "%s: media entity '%s' registered.\n",
__func__, dvbdev->entity->name);
return -ENOMEM;
adap->conn = conn;
- adap->conn_pads = kcalloc(1, sizeof(*adap->conn_pads),
- GFP_KERNEL);
+ adap->conn_pads = kzalloc(sizeof(*adap->conn_pads), GFP_KERNEL);
if (!adap->conn_pads)
return -ENOMEM;
if (ntuner && ndemod) {
ret = media_create_pad_links(mdev,
MEDIA_ENT_F_TUNER,
- tuner, TUNER_PAD_IF_OUTPUT,
+ tuner, TUNER_PAD_OUTPUT,
MEDIA_ENT_F_DTV_DEMOD,
demod, 0, MEDIA_LNK_FL_ENABLED,
false);
parg = sbuf;
} else {
/* too big to allocate from stack */
- mbuf = kmalloc(_IOC_SIZE(cmd),GFP_KERNEL);
+ mbuf = kmalloc(_IOC_SIZE(cmd), GFP_KERNEL);
if (NULL == mbuf)
return -ENOMEM;
parg = mbuf;
static void af9013_release(struct dvb_frontend *fe)
{
struct af9013_state *state = fe->demodulator_priv;
+
+ /* stop statistics polling */
+ cancel_delayed_work_sync(&state->statistics_work);
+
kfree(state);
}
dev_dbg(&dev->client->dev, "\n");
+ /* stop statistics polling */
+ cancel_delayed_work_sync(&dev->stat_work);
+
dev->fe.ops.release = NULL;
dev->fe.demodulator_priv = NULL;
kfree(dev);
*
* Copyright (C) 2001-5, B2C2 inc.
*
- * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
+ * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@posteo.de>
*
* This driver is "hard-coded" to be used with the 1st generation of
* Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming
};
MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2001-5, B2C2 inc.
*
- * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
+ * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@posteo.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*
* Copyright (C) 2001-5, B2C2 inc.
*
- * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@desy.de>
+ * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@posteo.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
static int cxd2820r_gpio_direction_output(struct gpio_chip *chip, unsigned nr,
int val)
{
- struct cxd2820r_priv *priv =
- container_of(chip, struct cxd2820r_priv, gpio_chip);
+ struct cxd2820r_priv *priv = gpiochip_get_data(chip);
u8 gpio[GPIO_COUNT];
dev_dbg(&priv->i2c->dev, "%s: nr=%d val=%d\n", __func__, nr, val);
static void cxd2820r_gpio_set(struct gpio_chip *chip, unsigned nr, int val)
{
- struct cxd2820r_priv *priv =
- container_of(chip, struct cxd2820r_priv, gpio_chip);
+ struct cxd2820r_priv *priv = gpiochip_get_data(chip);
u8 gpio[GPIO_COUNT];
dev_dbg(&priv->i2c->dev, "%s: nr=%d val=%d\n", __func__, nr, val);
static int cxd2820r_gpio_get(struct gpio_chip *chip, unsigned nr)
{
- struct cxd2820r_priv *priv =
- container_of(chip, struct cxd2820r_priv, gpio_chip);
+ struct cxd2820r_priv *priv = gpiochip_get_data(chip);
dev_dbg(&priv->i2c->dev, "%s: nr=%d\n", __func__, nr);
priv->gpio_chip.base = -1; /* dynamic allocation */
priv->gpio_chip.ngpio = GPIO_COUNT;
priv->gpio_chip.can_sleep = 1;
- ret = gpiochip_add(&priv->gpio_chip);
+ ret = gpiochip_add_data(&priv->gpio_chip, priv);
if (ret)
goto error;
}
EXPORT_SYMBOL(dib0070_attach);
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for the DiBcom 0070 base-band RF Tuner");
MODULE_LICENSE("GPL");
}
EXPORT_SYMBOL(dib0090_fw_register);
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_AUTHOR("Olivier Grenie <olivier.grenie@dibcom.fr>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
+MODULE_AUTHOR("Olivier Grenie <olivier.grenie@parrot.com>");
MODULE_DESCRIPTION("Driver for the DiBcom 0090 base-band RF Tuner");
MODULE_LICENSE("GPL");
* public header file of the frontend drivers for mobile DVB-T demodulators
* DiBcom 3000M-B and DiBcom 3000P/M-C (http://www.dibcom.fr/)
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* based on GPL code from DibCom, which has
*
- * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
+ * Copyright (C) 2004 Amaury Demol for DiBcom
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
*
* Acknowledgements
*
- * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
+ * Amaury Demol from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
* see Documentation/dvb/README.dvb-usb for more information
* Frontend driver for mobile DVB-T demodulator DiBcom 3000M-B
* DiBcom (http://www.dibcom.fr/)
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* based on GPL code from DibCom, which has
*
- * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
+ * Copyright (C) 2004 Amaury Demol for DiBcom
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
*
* Acknowledgements
*
- * Amaury Demol (ademol@dibcom.fr) from DiBcom for providing specs and driver
+ * Amaury Demol from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
* see Documentation/dvb/README.dvb-usb for more information
/* Version information */
#define DRIVER_VERSION "0.1"
#define DRIVER_DESC "DiBcom 3000M-B DVB-T demodulator"
-#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de"
+#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@posteo.de"
static int debug;
module_param(debug, int, 0644);
/*
* dib3000mb_priv.h
*
- * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* Driver for DiBcom DiB3000MC/P-demodulator.
*
* Copyright (C) 2004-7 DiBcom (http://www.dibcom.fr/)
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This code is partially based on the previous dib3000mc.c .
*
.read_ucblocks = dib3000mc_read_unc_blocks,
};
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for the DiBcom 3000MC/P COFDM demodulator");
MODULE_LICENSE("GPL");
* Driver for DiBcom DiB3000MC/P-demodulator.
*
* Copyright (C) 2004-6 DiBcom (http://www.dibcom.fr/)
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher\@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This code is partially based on the previous dib3000mc.c .
*
.read_ucblocks = dib7000m_read_unc_blocks,
};
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for the DiBcom 7000MA/MB/PA/PB/MC COFDM demodulator");
MODULE_LICENSE("GPL");
.read_ucblocks = dib7000p_read_unc_blocks,
};
-MODULE_AUTHOR("Olivier Grenie <ogrenie@dibcom.fr>");
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_AUTHOR("Olivier Grenie <olivie.grenie@parrot.com>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator");
MODULE_LICENSE("GPL");
}
EXPORT_SYMBOL(dib8000_attach);
-MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@dibcom.fr, " "Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@parrot.com, Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator");
MODULE_LICENSE("GPL");
.read_ucblocks = dib9000_read_unc_blocks,
};
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
-MODULE_AUTHOR("Olivier Grenie <ogrenie@dibcom.fr>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
+MODULE_AUTHOR("Olivier Grenie <olivier.grenie@parrot.com>");
MODULE_DESCRIPTION("Driver for the DiBcom 9000 COFDM demodulator");
MODULE_LICENSE("GPL");
}
EXPORT_SYMBOL(systime);
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Common function the DiBcom demodulator family");
MODULE_LICENSE("GPL");
dev_dbg(&client->dev, "\n");
+ /* stop statistics polling */
+ cancel_delayed_work_sync(&dev->stat_work);
+
i2c_del_mux_adapter(dev->adapter);
regmap_exit(dev->regmap);
kfree(dev);
static int si2165_writereg_mask8(struct si2165_state *state, const u16 reg,
u8 val, u8 mask)
{
- int ret;
- u8 tmp;
-
if (mask != 0xff) {
- ret = si2165_readreg8(state, reg, &tmp);
+ u8 tmp;
+ int ret = si2165_readreg8(state, reg, &tmp);
+
if (ret < 0)
- goto err;
+ return ret;
val &= mask;
tmp &= ~mask;
val |= tmp;
}
-
- ret = si2165_writereg8(state, reg, val);
-err:
- return ret;
+ return si2165_writereg8(state, reg, val);
}
#define REG16(reg, val) { (reg), (val) & 0xff }, { (reg)+1, (val)>>8 & 0xff }
struct si2165_state *state = fe->demodulator_priv;
u32 dvb_rate = 0;
u16 bw10k;
+ u32 bw_hz = p->bandwidth_hz;
dprintk("%s: called\n", __func__);
if (!state->has_dvbt)
return -EINVAL;
- if (p->bandwidth_hz > 0) {
- dvb_rate = p->bandwidth_hz * 8 / 7;
- bw10k = p->bandwidth_hz / 10000;
- } else {
- dvb_rate = 8 * 8 / 7;
- bw10k = 800;
- }
+ /* no bandwidth auto-detection */
+ if (bw_hz == 0)
+ return -EINVAL;
+
+ dvb_rate = bw_hz * 8 / 7;
+ bw10k = bw_hz / 10000;
ret = si2165_adjust_pll_divl(state, 12);
if (ret < 0)
if (debug_legacy_dish_switch)
printk ("%s switch command: 0x%04lx\n",__func__, cmd);
- nexttime = ktime_get_real();
+ nexttime = ktime_get_boottime();
if (debug_legacy_dish_switch)
tv[0] = nexttime;
stv0299_writeregI (state, 0x0c, reg0x0c | 0x50); /* set LNB to 18V */
for (i=0; i<9; i++) {
if (debug_legacy_dish_switch)
- tv[i+1] = ktime_get_real();
+ tv[i+1] = ktime_get_boottime();
if((cmd & 0x01) != last) {
/* set voltage to (last ? 13V : 18V) */
stv0299_writeregI (state, 0x0c, reg0x0c | (last ? lv_mask : 0x50));
.release = stv6110x_release
};
-static struct stv6110x_devctl stv6110x_ctl = {
+static const struct stv6110x_devctl stv6110x_ctl = {
.tuner_init = stv6110x_init,
.tuner_sleep = stv6110x_sleep,
.tuner_set_mode = stv6110x_set_mode,
.tuner_get_status = stv6110x_get_status,
};
-struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
+const struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
const struct stv6110x_config *config,
struct i2c_adapter *i2c)
{
#if IS_REACHABLE(CONFIG_DVB_STV6110x)
-extern struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
+extern const struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
const struct stv6110x_config *config,
struct i2c_adapter *i2c);
#else
-static inline struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
+static inline const struct stv6110x_devctl *stv6110x_attach(struct dvb_frontend *fe,
const struct stv6110x_config *config,
struct i2c_adapter *i2c)
{
const struct stv6110x_config *config;
u8 regs[8];
- struct stv6110x_devctl *devctl;
+ const struct stv6110x_devctl *devctl;
};
#endif /* __STV6110x_PRIV_H */
dev_dbg(&client->dev, "\n");
+ /* stop statistics polling */
+ if (!dev->dont_poll)
+ cancel_delayed_work_sync(&dev->stat_work);
+
regmap_exit(dev->regmap);
kfree(dev);
return 0;
return 0;
}
+static int adv76xx_get_selection(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_selection *sel)
+{
+ struct adv76xx_state *state = to_state(sd);
+
+ if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+ return -EINVAL;
+ /* Only CROP, CROP_DEFAULT and CROP_BOUNDS are supported */
+ if (sel->target > V4L2_SEL_TGT_CROP_BOUNDS)
+ return -EINVAL;
+
+ sel->r.left = 0;
+ sel->r.top = 0;
+ sel->r.width = state->timings.bt.width;
+ sel->r.height = state->timings.bt.height;
+
+ return 0;
+}
+
static int adv76xx_set_format(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
static const struct v4l2_subdev_pad_ops adv76xx_pad_ops = {
.enum_mbus_code = adv76xx_enum_mbus_code,
+ .get_selection = adv76xx_get_selection,
.get_fmt = adv76xx_get_format,
.set_fmt = adv76xx_set_format,
.get_edid = adv76xx_get_edid,
struct device_node *endpoint;
struct device_node *np;
unsigned int flags;
+ int ret;
u32 v;
np = state->i2c_clients[ADV76XX_PAGE_IO]->dev.of_node;
if (!endpoint)
return -EINVAL;
- v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+ ret = v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+ if (ret) {
+ of_node_put(endpoint);
+ return ret;
+ }
if (!of_property_read_u32(endpoint, "default-input", &v))
state->pdata.default_input = v;
int msp_revision;
int msp_product, msp_prod_hi, msp_prod_lo;
int msp_rom;
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ int ret;
+#endif
if (!id)
strlcpy(client->name, "msp3400", sizeof(client->name));
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &msp_ops);
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ state->pads[IF_AUD_DEC_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
+ state->pads[IF_AUD_DEC_PAD_OUT].flags = MEDIA_PAD_FL_SOURCE;
+
+ sd->entity.function = MEDIA_ENT_F_IF_AUD_DECODER;
+
+ ret = media_entity_pads_init(&sd->entity, 2, state->pads);
+ if (ret < 0)
+ return ret;
+#endif
+
state->v4l2_std = V4L2_STD_NTSC;
state->detected_std = V4L2_STD_ALL;
state->audmode = V4L2_TUNER_MODE_STEREO;
#include <media/drv-intf/msp3400.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-mc.h>
/* ---------------------------------------------------------------------- */
wait_queue_head_t wq;
unsigned int restart:1;
unsigned int watch_stereo:1;
+
+#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER)
+ struct media_pad pads[IF_AUD_DEC_PAD_NUM_PADS];
+#endif
};
static inline struct msp_state *to_state(struct v4l2_subdev *sd)
struct mt9v011 {
struct v4l2_subdev sd;
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct media_pad pad;
+#endif
struct v4l2_ctrl_handler ctrls;
unsigned width, height;
unsigned xtal;
u16 version;
struct mt9v011 *core;
struct v4l2_subdev *sd;
+#ifdef CONFIG_MEDIA_CONTROLLER
+ int ret;
+#endif
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(c->adapter,
sd = &core->sd;
v4l2_i2c_subdev_init(sd, c, &mt9v011_ops);
+#ifdef CONFIG_MEDIA_CONTROLLER
+ core->pad.flags = MEDIA_PAD_FL_SOURCE;
+ sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+ ret = media_entity_pads_init(&sd->entity, 1, &core->pad);
+ if (ret < 0)
+ return ret;
+#endif
+
/* Check if the sensor is really a MT9V011 */
version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
if ((version != MT9V011_VERSION) &&
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/log2.h>
#include <linux/mutex.h>
struct regmap *regmap;
struct clk *clk;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *standby_gpio;
struct mt9v032_platform_data *pdata;
const struct mt9v032_model_info *model;
struct regmap *map = mt9v032->regmap;
int ret;
+ if (mt9v032->reset_gpio)
+ gpiod_set_value_cansleep(mt9v032->reset_gpio, 1);
+
ret = clk_set_rate(mt9v032->clk, mt9v032->sysclk);
if (ret < 0)
return ret;
+ /* System clock has to be enabled before releasing the reset */
ret = clk_prepare_enable(mt9v032->clk);
if (ret)
return ret;
udelay(1);
+ if (mt9v032->reset_gpio) {
+ gpiod_set_value_cansleep(mt9v032->reset_gpio, 0);
+
+ /* After releasing reset we need to wait 10 clock cycles
+ * before accessing the sensor over I2C. As the minimum SYSCLK
+ * frequency is 13MHz, waiting 1µs will be enough in the worst
+ * case.
+ */
+ udelay(1);
+ }
+
/* Reset the chip and stop data read out */
ret = regmap_write(map, MT9V032_RESET, 1);
if (ret < 0)
if (IS_ERR(mt9v032->clk))
return PTR_ERR(mt9v032->clk);
+ mt9v032->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(mt9v032->reset_gpio))
+ return PTR_ERR(mt9v032->reset_gpio);
+
+ mt9v032->standby_gpio = devm_gpiod_get_optional(&client->dev, "standby",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(mt9v032->standby_gpio))
+ return PTR_ERR(mt9v032->standby_gpio);
+
mutex_init(&mt9v032->power_lock);
mt9v032->pdata = pdata;
mt9v032->model = (const void *)did->driver_data;
}
usleep_range(1000, 2000);
- ret = ov2659_init(sd, 0);
- if (ret < 0)
- return ret;
-
/* Check sensor revision */
ret = ov2659_read(client, REG_SC_CHIP_ID_H, &pid);
if (!ret)
dev_err(&client->dev,
"Sensor detection failed (%04X, %d)\n",
id, ret);
- else
+ else {
dev_info(&client->dev, "Found OV%04X sensor\n", id);
+ ret = ov2659_init(sd, 0);
+ }
}
return ret;
return 0;
}
- v4l2_of_parse_endpoint(node_ep, &ep);
+ ret = v4l2_of_parse_endpoint(node_ep, &ep);
of_node_put(node_ep);
+ if (ret)
+ return ret;
if (ep.bus_type != V4L2_MBUS_CSI2) {
dev_err(dev, "unsupported bus type\n");
SPI_DIR_RX,
SPI_DIR_TX
};
-MODULE_DEVICE_TABLE(of, s5c73m3_spi_ids);
static int spi_xmit(struct spi_device *spi_dev, void *addr, const int len,
enum spi_direction dir)
return -EINVAL;
}
- v4l2_of_parse_endpoint(node_ep, &ep);
+ ret = v4l2_of_parse_endpoint(node_ep, &ep);
of_node_put(node_ep);
+ if (ret)
+ return ret;
+
state->bus_type = ep.bus_type;
switch (state->bus_type) {
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-mc.h>
#include <media/i2c/saa7115.h>
#include <asm/div64.h>
struct saa711x_state {
struct v4l2_subdev sd;
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct media_pad pads[DEMOD_NUM_PADS];
+#endif
struct v4l2_ctrl_handler hdl;
struct {
struct saa7115_platform_data *pdata;
int ident;
char name[CHIP_VER_SIZE + 1];
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ int ret;
+#endif
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &saa711x_ops);
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ state->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
+ state->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
+ state->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
+
+ sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
+
+ ret = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, state->pads);
+ if (ret < 0)
+ return ret;
+#endif
+
v4l_info(client, "%s found @ 0x%x (%s)\n", name,
client->addr << 1, client->adapter->name);
hdl = &state->hdl;
.s_mbus_config = mt9m001_s_mbus_config,
};
-static struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = {
+static const struct v4l2_subdev_sensor_ops mt9m001_subdev_sensor_ops = {
.g_skip_top_lines = mt9m001_g_skip_top_lines,
};
.s_mbus_config = mt9t031_s_mbus_config,
};
-static struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = {
+static const struct v4l2_subdev_sensor_ops mt9t031_subdev_sensor_ops = {
.g_skip_top_lines = mt9t031_g_skip_top_lines,
};
.s_mbus_config = mt9v022_s_mbus_config,
};
-static struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = {
+static const struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = {
.g_skip_top_lines = mt9v022_g_skip_top_lines,
};
#define EDID_NUM_BLOCKS_MAX 8
#define EDID_BLOCK_SIZE 128
-/* Max transfer size done by I2C transfer functions */
-#define MAX_XFER_SIZE (EDID_NUM_BLOCKS_MAX * EDID_BLOCK_SIZE + 2)
+#define I2C_MAX_XFER_SIZE (EDID_BLOCK_SIZE + 2)
static const struct v4l2_dv_timings_cap tc358743_timings_cap = {
.type = V4L2_DV_BT_656_1120,
/* edid */
u8 edid_blocks_written;
- /* used by i2c_wr() */
- u8 wr_data[MAX_XFER_SIZE];
-
struct v4l2_dv_timings timings;
u32 mbus_fmt_code;
{
struct tc358743_state *state = to_state(sd);
struct i2c_client *client = state->i2c_client;
- u8 *data = state->wr_data;
int err, i;
struct i2c_msg msg;
+ u8 data[I2C_MAX_XFER_SIZE];
- if ((2 + n) > sizeof(state->wr_data))
+ if ((2 + n) > I2C_MAX_XFER_SIZE) {
+ n = I2C_MAX_XFER_SIZE - 2;
v4l2_warn(sd, "i2c wr reg=%04x: len=%d is too big!\n",
reg, 2 + n);
+ }
msg.addr = client->addr;
msg.buf = data;
if (tc358743_get_detected_timings(sd, &timings)) {
enable_stream(sd, false);
- v4l2_dbg(1, debug, sd, "%s: Format changed. No signal\n",
+ v4l2_dbg(1, debug, sd, "%s: No signal\n",
__func__);
} else {
if (!v4l2_match_dv_timings(&state->timings, &timings, 0, false))
enable_stream(sd, false);
- v4l2_print_dv_timings(sd->name,
- "tc358743_format_change: Format changed. New format: ",
- &timings, false);
+ if (debug)
+ v4l2_print_dv_timings(sd->name,
+ "tc358743_format_change: New format: ",
+ &timings, false);
}
if (sd->devnode)
{
struct tc358743_state *state = to_state(sd);
u16 edid_len = edid->blocks * EDID_BLOCK_SIZE;
+ int i;
v4l2_dbg(2, debug, sd, "%s, pad %d, start block %d, blocks %d\n",
__func__, edid->pad, edid->start_block, edid->blocks);
return 0;
}
- i2c_wr(sd, EDID_RAM, edid->edid, edid_len);
+ for (i = 0; i < edid_len; i += EDID_BLOCK_SIZE)
+ i2c_wr(sd, EDID_RAM + i, edid->edid + i, EDID_BLOCK_SIZE);
state->edid_blocks_written = edid->blocks;
static struct tvp514x_platform_data *
tvp514x_get_pdata(struct i2c_client *client)
{
- struct tvp514x_platform_data *pdata;
+ struct tvp514x_platform_data *pdata = NULL;
struct v4l2_of_endpoint bus_cfg;
struct device_node *endpoint;
unsigned int flags;
if (!endpoint)
return NULL;
+ if (v4l2_of_parse_endpoint(endpoint, &bus_cfg))
+ goto done;
+
pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
goto done;
- v4l2_of_parse_endpoint(endpoint, &bus_cfg);
flags = bus_cfg.bus.parallel.flags;
if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <media/v4l2-async.h>
#include <media/v4l2-device.h>
#include <media/i2c/tvp5150.h>
#include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
+#include <media/v4l2-mc.h>
#include "tvp5150_reg.h"
struct tvp5150 {
struct v4l2_subdev sd;
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct media_pad pads[DEMOD_NUM_PADS];
+#endif
struct v4l2_ctrl_handler hdl;
struct v4l2_rect rect;
u32 input;
u32 output;
int enable;
+
+ enum v4l2_mbus_type mbus_type;
};
static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
v4l2_ctrl_handler_setup(&decoder->hdl);
tvp5150_set_std(sd, decoder->norm);
+
+ if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
+ tvp5150_write(sd, TVP5150_DATA_RATE_SEL, 0x40);
+
return 0;
};
}
}
-static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_pad_config *cfg,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- if (code->pad || code->index)
- return -EINVAL;
-
- code->code = MEDIA_BUS_FMT_UYVY8_2X8;
- return 0;
-}
-
static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
tvp5150_reset(sd, 0);
f->width = decoder->rect.width;
- f->height = decoder->rect.height;
+ f->height = decoder->rect.height / 2;
f->code = MEDIA_BUS_FMT_UYVY8_2X8;
- f->field = V4L2_FIELD_SEQ_TB;
+ f->field = V4L2_FIELD_ALTERNATE;
f->colorspace = V4L2_COLORSPACE_SMPTE170M;
v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
return 0;
}
+static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
+ struct v4l2_mbus_config *cfg)
+{
+ struct tvp5150 *decoder = to_tvp5150(sd);
+
+ cfg->type = decoder->mbus_type;
+ cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING
+ | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH;
+
+ return 0;
+}
+
+/****************************************************************************
+ V4L2 subdev pad ops
+ ****************************************************************************/
+static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->pad || code->index)
+ return -EINVAL;
+
+ code->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ return 0;
+}
+
+static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_size_enum *fse)
+{
+ struct tvp5150 *decoder = to_tvp5150(sd);
+
+ if (fse->index >= 8 || fse->code != MEDIA_BUS_FMT_UYVY8_2X8)
+ return -EINVAL;
+
+ fse->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ fse->min_width = decoder->rect.width;
+ fse->max_width = decoder->rect.width;
+ fse->min_height = decoder->rect.height / 2;
+ fse->max_height = decoder->rect.height / 2;
+
+ return 0;
+}
+
/****************************************************************************
I2C Command
****************************************************************************/
+static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct tvp5150 *decoder = to_tvp5150(sd);
+ /* Output format: 8-bit ITU-R BT.656 with embedded syncs */
+ int val = 0x09;
+
+ /* Output format: 8-bit 4:2:2 YUV with discrete sync */
+ if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
+ val = 0x0d;
+
+ /* Initializes TVP5150 to its default values */
+ /* # set PCLK (27MHz) */
+ tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00);
+
+ if (enable)
+ tvp5150_write(sd, TVP5150_MISC_CTL, val);
+ else
+ tvp5150_write(sd, TVP5150_MISC_CTL, 0x00);
+
+ return 0;
+}
+
static int tvp5150_s_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
.s_std = tvp5150_s_std,
+ .s_stream = tvp5150_s_stream,
.s_routing = tvp5150_s_routing,
.s_crop = tvp5150_s_crop,
.g_crop = tvp5150_g_crop,
.cropcap = tvp5150_cropcap,
+ .g_mbus_config = tvp5150_g_mbus_config,
};
static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = {
.enum_mbus_code = tvp5150_enum_mbus_code,
+ .enum_frame_size = tvp5150_enum_frame_size,
.set_fmt = tvp5150_fill_fmt,
.get_fmt = tvp5150_fill_fmt,
};
I2C Client & Driver
****************************************************************************/
+static int tvp5150_detect_version(struct tvp5150 *core)
+{
+ struct v4l2_subdev *sd = &core->sd;
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
+ unsigned int i;
+ u16 dev_id;
+ u16 rom_ver;
+ u8 regs[4];
+ int res;
+
+ /*
+ * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
+ * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER
+ */
+ for (i = 0; i < 4; i++) {
+ res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
+ if (res < 0)
+ return res;
+ regs[i] = res;
+ }
+
+ dev_id = (regs[0] << 8) | regs[1];
+ rom_ver = (regs[2] << 8) | regs[3];
+
+ v4l2_info(sd, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n",
+ dev_id, regs[2], regs[3], c->addr << 1, c->adapter->name);
+
+ if (dev_id == 0x5150 && rom_ver == 0x0321) { /* TVP51510A */
+ v4l2_info(sd, "tvp5150a detected.\n");
+ } else if (dev_id == 0x5150 && rom_ver == 0x0400) { /* TVP5150AM1 */
+ v4l2_info(sd, "tvp5150am1 detected.\n");
+
+ /* ITU-T BT.656.4 timing */
+ tvp5150_write(sd, TVP5150_REV_SELECT, 0);
+ } else if (dev_id == 0x5151 && rom_ver == 0x0100) { /* TVP5151 */
+ v4l2_info(sd, "tvp5151 detected.\n");
+ } else {
+ v4l2_info(sd, "*** unknown tvp%04x chip detected.\n", dev_id);
+ }
+
+ return 0;
+}
+
+static int tvp5150_init(struct i2c_client *c)
+{
+ struct gpio_desc *pdn_gpio;
+ struct gpio_desc *reset_gpio;
+
+ pdn_gpio = devm_gpiod_get_optional(&c->dev, "pdn", GPIOD_OUT_HIGH);
+ if (IS_ERR(pdn_gpio))
+ return PTR_ERR(pdn_gpio);
+
+ if (pdn_gpio) {
+ gpiod_set_value_cansleep(pdn_gpio, 0);
+ /* Delay time between power supplies active and reset */
+ msleep(20);
+ }
+
+ reset_gpio = devm_gpiod_get_optional(&c->dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(reset_gpio))
+ return PTR_ERR(reset_gpio);
+
+ if (reset_gpio) {
+ /* RESETB pulse duration */
+ ndelay(500);
+ gpiod_set_value_cansleep(reset_gpio, 0);
+ /* Delay time between end of reset to I2C active */
+ usleep_range(200, 250);
+ }
+
+ return 0;
+}
+
+static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
+{
+ struct v4l2_of_endpoint bus_cfg;
+ struct device_node *ep;
+ unsigned int flags;
+ int ret = 0;
+
+ ep = of_graph_get_next_endpoint(np, NULL);
+ if (!ep)
+ return -EINVAL;
+
+ ret = v4l2_of_parse_endpoint(ep, &bus_cfg);
+ if (ret)
+ goto err;
+
+ flags = bus_cfg.bus.parallel.flags;
+
+ if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
+ !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
+ flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
+ flags & V4L2_MBUS_FIELD_EVEN_LOW))
+ return -EINVAL;
+
+ decoder->mbus_type = bus_cfg.bus_type;
+
+err:
+ of_node_put(ep);
+ return ret;
+}
+
static int tvp5150_probe(struct i2c_client *c,
const struct i2c_device_id *id)
{
struct tvp5150 *core;
struct v4l2_subdev *sd;
- int tvp5150_id[4];
- int i, res;
+ struct device_node *np = c->dev.of_node;
+ int res;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(c->adapter,
I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -EIO;
+ res = tvp5150_init(c);
+ if (res)
+ return res;
+
core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
if (!core)
return -ENOMEM;
+
sd = &core->sd;
- v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
- /*
- * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
- * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER
- */
- for (i = 0; i < 4; i++) {
- res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
- if (res < 0)
+ if (IS_ENABLED(CONFIG_OF) && np) {
+ res = tvp5150_parse_dt(core, np);
+ if (res) {
+ v4l2_err(sd, "DT parsing error: %d\n", res);
return res;
- tvp5150_id[i] = res;
+ }
+ } else {
+ /* Default to BT.656 embedded sync */
+ core->mbus_type = V4L2_MBUS_BT656;
}
- v4l_info(c, "chip found @ 0x%02x (%s)\n",
- c->addr << 1, c->adapter->name);
+ v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- if (tvp5150_id[2] == 4 && tvp5150_id[3] == 0) { /* Is TVP5150AM1 */
- v4l2_info(sd, "tvp%02x%02xam1 detected.\n",
- tvp5150_id[0], tvp5150_id[1]);
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ core->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
+ core->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
+ core->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
- /* ITU-T BT.656.4 timing */
- tvp5150_write(sd, TVP5150_REV_SELECT, 0);
- } else {
- /* Is TVP5150A */
- if (tvp5150_id[2] == 3 || tvp5150_id[3] == 0x21) {
- v4l2_info(sd, "tvp%02x%02xa detected.\n",
- tvp5150_id[0], tvp5150_id[1]);
- } else {
- v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
- tvp5150_id[0], tvp5150_id[1]);
- v4l2_info(sd, "*** Rom ver is %d.%d\n",
- tvp5150_id[2], tvp5150_id[3]);
- }
- }
+ sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
+
+ res = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, core->pads);
+ if (res < 0)
+ return res;
+#endif
+
+ res = tvp5150_detect_version(core);
+ if (res < 0)
+ return res;
core->norm = V4L2_STD_ALL; /* Default is autodetect */
core->input = TVP5150_COMPOSITE1;
core->enable = 1;
- v4l2_ctrl_handler_init(&core->hdl, 4);
+ v4l2_ctrl_handler_init(&core->hdl, 5);
v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
V4L2_CID_SATURATION, 0, 255, 1, 128);
v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
V4L2_CID_HUE, -128, 127, 1, 0);
+ v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
+ V4L2_CID_PIXEL_RATE, 27000000,
+ 27000000, 1, 27000000);
sd->ctrl_handler = &core->hdl;
if (core->hdl.error) {
res = core->hdl.error;
};
MODULE_DEVICE_TABLE(i2c, tvp5150_id);
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id tvp5150_of_match[] = {
+ { .compatible = "ti,tvp5150", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, tvp5150_of_match);
+#endif
+
static struct i2c_driver tvp5150_driver = {
.driver = {
+ .of_match_table = of_match_ptr(tvp5150_of_match),
.name = "tvp5150",
},
.probe = tvp5150_probe,
tvp7002_get_pdata(struct i2c_client *client)
{
struct v4l2_of_endpoint bus_cfg;
- struct tvp7002_config *pdata;
+ struct tvp7002_config *pdata = NULL;
struct device_node *endpoint;
unsigned int flags;
if (!endpoint)
return NULL;
+ if (v4l2_of_parse_endpoint(endpoint, &bus_cfg))
+ goto done;
+
pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
goto done;
- v4l2_of_parse_endpoint(endpoint, &bus_cfg);
flags = bus_cfg.bus.parallel.flags;
if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
return 0;
}
-static u16 vpx3220_fp_read(struct v4l2_subdev *sd, u16 fpaddr)
+static int vpx3220_fp_read(struct v4l2_subdev *sd, u16 fpaddr)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
s16 data;
return ret;
}
-#if 0 /* Let's postpone it to Kernel 4.6 */
static long __media_device_get_topology(struct media_device *mdev,
struct media_v2_topology *topo)
{
return 0;
}
-#endif
static long media_device_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
mutex_unlock(&dev->graph_mutex);
break;
-#if 0 /* Let's postpone it to Kernel 4.6 */
case MEDIA_IOC_G_TOPOLOGY:
mutex_lock(&dev->graph_mutex);
ret = media_device_get_topology(dev,
(struct media_v2_topology __user *)arg);
mutex_unlock(&dev->graph_mutex);
break;
-#endif
+
default:
ret = -ENOIOCTLCMD;
}
case MEDIA_IOC_DEVICE_INFO:
case MEDIA_IOC_ENUM_ENTITIES:
case MEDIA_IOC_SETUP_LINK:
-#if 0 /* Let's postpone it to Kernel 4.6 */
case MEDIA_IOC_G_TOPOLOGY:
-#endif
return media_device_ioctl(filp, cmd, arg);
case MEDIA_IOC_ENUM_LINKS32:
ret = mdev->fops->open(filp);
if (ret) {
put_device(&mdev->dev);
+ filp->private_data = NULL;
return ret;
}
}
media_entity_graph_walk_start(graph, entity_err);
while ((entity_err = media_entity_graph_walk_next(graph))) {
- entity_err->stream_count--;
- if (entity_err->stream_count == 0)
- entity_err->pipe = NULL;
+ /* don't let the stream_count go negative */
+ if (entity->stream_count > 0) {
+ entity_err->stream_count--;
+ if (entity_err->stream_count == 0)
+ entity_err->pipe = NULL;
+ }
/*
* We haven't increased stream_count further than this
media_entity_graph_walk_start(graph, entity);
while ((entity = media_entity_graph_walk_next(graph))) {
- entity->stream_count--;
- if (entity->stream_count == 0)
- entity->pipe = NULL;
+ /* don't let the stream_count go negative */
+ if (entity->stream_count > 0) {
+ entity->stream_count--;
+ if (entity->stream_count == 0)
+ entity->pipe = NULL;
+ }
}
if (!--pipe->streaming_count)
#define DRIVER_VERSION "0.1"
#define DRIVER_NAME "flexcop-pci"
-#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@posteo.de>"
struct flexcop_pci {
struct pci_dev *pdev;
static ssize_t show_card(struct device *cd,
struct device_attribute *attr, char *buf)
{
- struct video_device *vfd = container_of(cd, struct video_device, dev);
+ struct video_device *vfd = to_video_device(cd);
struct bttv *btv = video_get_drvdata(vfd);
return sprintf(buf, "%d\n", btv ? btv->c.type : UNSET);
}
struct bttv_fh *fh = priv;
struct bttv *btv = fh->btv;
unsigned int i;
- int err = 0;
for (i = 0; i < BTTV_TVNORMS; i++)
if (id & bttv_tvnorms[i].v4l2_id)
break;
- if (i == BTTV_TVNORMS) {
- err = -EINVAL;
- goto err;
- }
-
+ if (i == BTTV_TVNORMS)
+ return -EINVAL;
btv->std = id;
set_tvnorm(btv, i);
-
-err:
-
- return err;
+ return 0;
}
static int bttv_g_std(struct file *file, void *priv, v4l2_std_id *id)
{
struct bttv_fh *fh = priv;
struct bttv *btv = fh->btv;
- int rc = 0;
- if (i->index >= bttv_tvcards[btv->c.type].video_inputs) {
- rc = -EINVAL;
- goto err;
- }
+ if (i->index >= bttv_tvcards[btv->c.type].video_inputs)
+ return -EINVAL;
i->type = V4L2_INPUT_TYPE_CAMERA;
i->audioset = 0;
}
i->std = BTTV_NORMS;
-
-err:
-
- return rc;
+ return 0;
}
static int bttv_g_input(struct file *file, void *priv, unsigned int *i)
return request_firmware(fw, name, &bt->bt->dev->dev);
}
-static struct sp887x_config microtune_mt7202dtf_config = {
+static const struct sp887x_config microtune_mt7202dtf_config = {
.demod_address = 0x70,
.request_firmware = microtune_mt7202dtf_request_firmware,
};
bttv_write_gpio(bt->bttv_nr, 0x0001, 0x0000);
}
-static struct or51211_config or51211_config = {
+static const struct or51211_config or51211_config = {
.demod_address = 0x15,
.request_firmware = or51211_request_firmware,
.setmode = or51211_setmode,
struct stv090x_config *feconf = type ? &stv0900_aa : &stv0900;
struct stv6110x_config *tunerconf = (input->nr & 1) ?
&stv6110b : &stv6110a;
- struct stv6110x_devctl *ctl;
+ const struct stv6110x_devctl *ctl;
ctl = dvb_attach(stv6110x_attach, input->fe, tunerconf, i2c);
if (!ctl) {
/* allocate device context */
ndev = kzalloc(sizeof(*ndev), GFP_KERNEL);
-
if (!ndev)
goto dev_alloc_err;
- memset(ndev, 0, sizeof(*ndev));
+
ndev->old_fw = old_firmware;
ndev->wq = create_singlethread_workqueue(NETUP_UNIDVB_NAME);
if (!ndev->wq) {
chan->dev->card_info->fe_config[chan->number];
struct stv6110x_config *tunerconf = (struct stv6110x_config *)
chan->dev->card_info->tuner_config[chan->number];
- struct stv6110x_devctl *ctl;
+ const struct stv6110x_devctl *ctl;
/* tuner 1+2: i2c adapter #0, tuner 3+4: i2c adapter #1 */
if (chan->number < 2)
.vidioc_querybuf = vb2_ioctl_querybuf,
.vidioc_qbuf = vb2_ioctl_qbuf,
.vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
.vidioc_streamon = vb2_ioctl_streamon,
.vidioc_streamoff = vb2_ioctl_streamoff,
.vidioc_g_frequency = saa7134_g_frequency,
* transfers that do not start at the beginning of a page. A USERPTR
* can start anywhere in a page, so USERPTR support is a no-go.
*/
- q->io_modes = VB2_MMAP | VB2_READ;
+ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
q->drv_priv = &dev->ts_q;
q->ops = &saa7134_empress_qops;
q->gfp_flags = GFP_DMA32;
return 0;
}
-static struct go7007_hpi_ops saa7134_go7007_hpi_ops = {
+static const struct go7007_hpi_ops saa7134_go7007_hpi_ops = {
.interface_reset = saa7134_go7007_interface_reset,
.write_interrupt = saa7134_go7007_write_interrupt,
.read_interrupt = saa7134_go7007_read_interrupt,
.vidioc_querybuf = vb2_ioctl_querybuf,
.vidioc_qbuf = vb2_ioctl_qbuf,
.vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_expbuf = vb2_ioctl_expbuf,
.vidioc_s_std = saa7134_s_std,
.vidioc_g_std = saa7134_g_std,
.vidioc_querystd = saa7134_querystd,
* USERPTR support is a no-go unless the application knows about these
* limitations and has special support for this.
*/
- q->io_modes = VB2_MMAP | VB2_READ;
+ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
if (saa7134_userptr)
q->io_modes |= VB2_USERPTR;
q->drv_priv = &dev->video_q;
#endif
}
-static struct sp8870_config alps_tdlb7_config = {
+static const struct sp8870_config alps_tdlb7_config = {
.demod_address = 0x71,
.request_firmware = alps_tdlb7_request_firmware,
}
case 0x101c: { /* TT S2-1600 */
- struct stv6110x_devctl *ctl;
+ const struct stv6110x_devctl *ctl;
saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
msleep(50);
saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
break;
case 0x1020: { /* Omicom S2 */
- struct stv6110x_devctl *ctl;
+ const struct stv6110x_devctl *ctl;
saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
msleep(50);
saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
source "drivers/media/platform/am437x/Kconfig"
source "drivers/media/platform/xilinx/Kconfig"
+config VIDEO_TI_CAL
+ tristate "TI CAL (Camera Adaptation Layer) driver"
+ depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on SOC_DRA7XX || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ default n
+ ---help---
+ Support for the TI CAL (Camera Adaptation Layer) block
+ found on DRA72X SoC.
+ In TI Technical Reference Manual this module is referred as
+ Camera Interface Subsystem (CAMSS).
+
endif # V4L_PLATFORM_DRIVERS
menuconfig V4L_MEM2MEM_DRIVERS
obj-$(CONFIG_VIDEO_TI_VPE) += ti-vpe/
+obj-$(CONFIG_VIDEO_TI_CAL) += ti-vpe/
+
obj-$(CONFIG_VIDEO_MX2_EMMAPRP) += mx2_emmaprp.o
obj-$(CONFIG_VIDEO_CODA) += coda/
/* Calculate bytesused field */
if (dst_buf->sequence == 0) {
- vb2_set_plane_payload(&dst_buf->vb2_buf, 0,
+ vb2_set_plane_payload(&dst_buf->vb2_buf, 0, wr_ptr - start_ptr +
ctx->vpu_header_size[0] +
ctx->vpu_header_size[1] +
ctx->vpu_header_size[2]);
*/
if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) {
if (fpc_physaddr != NULL) {
- free_pages((unsigned long)fpc_physaddr,
+ free_pages((unsigned long)fpc_virtaddr,
get_order
(config_params->fault_pxl.fp_num *
FP_NUM_BYTES));
{
struct gsc_ctx *ctx = fh_to_ctx(file->private_data);
struct gsc_dev *gsc = ctx->gsc_dev;
- int ret;
+ unsigned int ret;
if (mutex_lock_interruptible(&gsc->lock))
return -ERESTARTSYS;
struct fimc_source_info *pd = &fmd->sensor[index].pdata;
struct device_node *rem, *ep, *np;
struct v4l2_of_endpoint endpoint;
+ int ret;
/* Assume here a port node can have only one endpoint node. */
ep = of_get_next_child(port, NULL);
if (!ep)
return 0;
- v4l2_of_parse_endpoint(ep, &endpoint);
+ ret = v4l2_of_parse_endpoint(ep, &endpoint);
+ if (ret) {
+ of_node_put(ep);
+ return ret;
+ }
+
if (WARN_ON(endpoint.base.port == 0) || index >= FIMC_MAX_SENSORS)
return -EINVAL;
continue;
ret = fimc_md_parse_port_node(fmd, port, index);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(node);
goto rpm_put;
+ }
index++;
}
for_each_child_of_node(ports, node) {
ret = fimc_md_parse_port_node(fmd, node, index);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(node);
break;
+ }
index++;
}
rpm_put:
ret = fimc_md_register_platform_entity(fmd, pdev,
plat_entity);
put_device(&pdev->dev);
- if (ret < 0)
+ if (ret < 0) {
+ of_node_put(node);
break;
+ }
}
return ret;
{
struct device_node *node = pdev->dev.of_node;
struct v4l2_of_endpoint endpoint;
+ int ret;
if (of_property_read_u32(node, "clock-frequency",
&state->clk_frequency))
return -EINVAL;
}
/* Get port node and validate MIPI-CSI channel id. */
- v4l2_of_parse_endpoint(node, &endpoint);
+ ret = v4l2_of_parse_endpoint(node, &endpoint);
+ if (ret)
+ goto err;
state->index = endpoint.base.port - FIMC_INPUT_MIPI_CSI2_0;
if (state->index >= CSIS_MAX_ENTITIES)
"samsung,csis-wclk");
state->num_lanes = endpoint.bus.mipi_csi2.num_data_lanes;
- of_node_put(node);
- return 0;
+err:
+ of_node_put(node);
+ return ret;
}
static int s5pcsis_pm_resume(struct device *dev, bool runtime);
case CCDC_INPUT_PARALLEL:
ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL;
ispctrl_val |= parcfg->clk_pol << ISPCTRL_PAR_CLK_POL_SHIFT;
- shift += parcfg->data_lane_shift * 2;
+ shift += parcfg->data_lane_shift;
break;
case CCDC_INPUT_CSI2A:
struct isp_bus_cfg *buscfg = &isd->bus;
struct v4l2_of_endpoint vep;
unsigned int i;
+ int ret;
- v4l2_of_parse_endpoint(node, &vep);
+ ret = v4l2_of_parse_endpoint(node, &vep);
+ if (ret)
+ return ret;
dev_dbg(dev, "parsing endpoint %s, interface %u\n", node->full_name,
vep.base.port);
}
/* Interrupt */
- isp->irq_num = platform_get_irq(pdev, 0);
- if (isp->irq_num <= 0) {
+ ret = platform_get_irq(pdev, 0);
+ if (ret <= 0) {
dev_err(isp->dev, "No IRQ resource\n");
ret = -ENODEV;
goto error_iommu;
}
+ isp->irq_num = ret;
if (devm_request_irq(isp->dev, isp->irq_num, isp_isr, IRQF_SHARED,
"OMAP3 ISP", isp)) {
{ .compatible = "ti,omap3-isp" },
{ },
};
+MODULE_DEVICE_TABLE(of, omap3isp_of_table);
static struct platform_driver omap3isp_driver = {
.probe = isp_probe,
&((struct isp_bus_cfg *)
media_entity_to_v4l2_subdev(link->source->entity)
->host_priv)->bus.parallel;
- parallel_shift = parcfg->data_lane_shift * 2;
+ parallel_shift = parcfg->data_lane_shift;
} else {
parallel_shift = 0;
}
struct isp_buffer *buffer;
int restart = 0;
- if (prev->input == PREVIEW_INPUT_MEMORY) {
- buffer = omap3isp_video_buffer_next(&prev->video_in);
- if (buffer != NULL)
- preview_set_inaddr(prev, buffer->dma);
- pipe->state |= ISP_PIPELINE_IDLE_INPUT;
- }
-
if (prev->output & PREVIEW_OUTPUT_MEMORY) {
buffer = omap3isp_video_buffer_next(&prev->video_out);
if (buffer != NULL) {
pipe->state |= ISP_PIPELINE_IDLE_OUTPUT;
}
+ if (prev->input == PREVIEW_INPUT_MEMORY) {
+ buffer = omap3isp_video_buffer_next(&prev->video_in);
+ if (buffer != NULL)
+ preview_set_inaddr(prev, buffer->dma);
+ pipe->state |= ISP_PIPELINE_IDLE_INPUT;
+ }
+
switch (prev->state) {
case ISP_PIPELINE_STREAM_SINGLESHOT:
if (isp_pipeline_ready(pipe))
}
}
+/*
+ * omap3isp_video_return_buffers - Return all queued buffers to videobuf2
+ * @video: ISP video object
+ * @state: new state for the returned buffers
+ *
+ * Return all buffers queued on the video node to videobuf2 in the given state.
+ * The buffer state should be VB2_BUF_STATE_QUEUED if called due to an error
+ * when starting the stream, or VB2_BUF_STATE_ERROR otherwise.
+ *
+ * The function must be called with the video irqlock held.
+ */
+static void omap3isp_video_return_buffers(struct isp_video *video,
+ enum vb2_buffer_state state)
+{
+ while (!list_empty(&video->dmaqueue)) {
+ struct isp_buffer *buf;
+
+ buf = list_first_entry(&video->dmaqueue,
+ struct isp_buffer, irqlist);
+ list_del(&buf->irqlist);
+ vb2_buffer_done(&buf->vb.vb2_buf, state);
+ }
+}
+
+static int isp_video_start_streaming(struct vb2_queue *queue,
+ unsigned int count)
+{
+ struct isp_video_fh *vfh = vb2_get_drv_priv(queue);
+ struct isp_video *video = vfh->video;
+ struct isp_pipeline *pipe = to_isp_pipeline(&video->video.entity);
+ unsigned long flags;
+ int ret;
+
+ /* In sensor-to-memory mode, the stream can be started synchronously
+ * to the stream on command. In memory-to-memory mode, it will be
+ * started when buffers are queued on both the input and output.
+ */
+ if (pipe->input)
+ return 0;
+
+ ret = omap3isp_pipeline_set_stream(pipe,
+ ISP_PIPELINE_STREAM_CONTINUOUS);
+ if (ret < 0) {
+ spin_lock_irqsave(&video->irqlock, flags);
+ omap3isp_video_return_buffers(video, VB2_BUF_STATE_QUEUED);
+ spin_unlock_irqrestore(&video->irqlock, flags);
+ return ret;
+ }
+
+ spin_lock_irqsave(&video->irqlock, flags);
+ if (list_empty(&video->dmaqueue))
+ video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN;
+ spin_unlock_irqrestore(&video->irqlock, flags);
+
+ return 0;
+}
+
static const struct vb2_ops isp_video_queue_ops = {
.queue_setup = isp_video_queue_setup,
.buf_prepare = isp_video_buffer_prepare,
.buf_queue = isp_video_buffer_queue,
+ .start_streaming = isp_video_start_streaming,
};
/*
struct isp_buffer *omap3isp_video_buffer_next(struct isp_video *video)
{
struct isp_pipeline *pipe = to_isp_pipeline(&video->video.entity);
- enum isp_pipeline_state state;
+ enum vb2_buffer_state vb_state;
struct isp_buffer *buf;
unsigned long flags;
/* Report pipeline errors to userspace on the capture device side. */
if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && pipe->error) {
- state = VB2_BUF_STATE_ERROR;
+ vb_state = VB2_BUF_STATE_ERROR;
pipe->error = false;
} else {
- state = VB2_BUF_STATE_DONE;
+ vb_state = VB2_BUF_STATE_DONE;
}
- vb2_buffer_done(&buf->vb.vb2_buf, state);
+ vb2_buffer_done(&buf->vb.vb2_buf, vb_state);
spin_lock_irqsave(&video->irqlock, flags);
if (list_empty(&video->dmaqueue)) {
+ enum isp_pipeline_state state;
+
spin_unlock_irqrestore(&video->irqlock, flags);
if (video->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
* omap3isp_video_cancel_stream - Cancel stream on a video node
* @video: ISP video object
*
- * Cancelling a stream mark all buffers on the video node as erroneous and makes
- * sure no new buffer can be queued.
+ * Cancelling a stream returns all buffers queued on the video node to videobuf2
+ * in the erroneous state and makes sure no new buffer can be queued.
*/
void omap3isp_video_cancel_stream(struct isp_video *video)
{
unsigned long flags;
spin_lock_irqsave(&video->irqlock, flags);
-
- while (!list_empty(&video->dmaqueue)) {
- struct isp_buffer *buf;
-
- buf = list_first_entry(&video->dmaqueue,
- struct isp_buffer, irqlist);
- list_del(&buf->irqlist);
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
- }
-
+ omap3isp_video_return_buffers(video, VB2_BUF_STATE_ERROR);
video->error = true;
-
spin_unlock_irqrestore(&video->irqlock, flags);
}
if (ret < 0)
goto err_check_format;
- /* In sensor-to-memory mode, the stream can be started synchronously
- * to the stream on command. In memory-to-memory mode, it will be
- * started when buffers are queued on both the input and output.
- */
- if (pipe->input == NULL) {
- ret = omap3isp_pipeline_set_stream(pipe,
- ISP_PIPELINE_STREAM_CONTINUOUS);
- if (ret < 0)
- goto err_set_stream;
- spin_lock_irqsave(&video->irqlock, flags);
- if (list_empty(&video->dmaqueue))
- video->dmaqueue_flags |= ISP_VIDEO_DMAQUEUE_UNDERRUN;
- spin_unlock_irqrestore(&video->irqlock, flags);
- }
-
mutex_unlock(&video->stream_lock);
return 0;
-err_set_stream:
- mutex_lock(&video->queue_lock);
- vb2_streamoff(&vfh->queue, type);
- mutex_unlock(&video->queue_lock);
err_check_format:
media_entity_pipeline_stop(&video->video.entity);
err_pipeline_start:
* struct isp_parallel_cfg - Parallel interface configuration
* @data_lane_shift: Data lane shifter
* 0 - CAMEXT[13:0] -> CAM[13:0]
- * 1 - CAMEXT[13:2] -> CAM[11:0]
- * 2 - CAMEXT[13:4] -> CAM[9:0]
- * 3 - CAMEXT[13:6] -> CAM[7:0]
+ * 2 - CAMEXT[13:2] -> CAM[11:0]
+ * 4 - CAMEXT[13:4] -> CAM[9:0]
+ * 6 - CAMEXT[13:6] -> CAM[7:0]
* @clk_pol: Pixel clock polarity
* 0 - Sample on rising edge, 1 - Sample on falling edge
* @hs_pol: Horizontal synchronization polarity
* 0 - Normal, 1 - One's complement
*/
struct isp_parallel_cfg {
- unsigned int data_lane_shift:2;
+ unsigned int data_lane_shift:3;
unsigned int clk_pol:1;
unsigned int hs_pol:1;
unsigned int vs_pol:1;
{ .compatible = "renesas,jpu-r8a7791" }, /* M2-W */
{ .compatible = "renesas,jpu-r8a7792" }, /* V2H */
{ .compatible = "renesas,jpu-r8a7793" }, /* M2-N */
+ { .compatible = "renesas,rcar-gen2-jpu" },
{ },
};
MODULE_DEVICE_TABLE(of, jpu_dt_ids);
#define RCAR_VIN_BT656 (1 << 3)
enum chip_id {
+ RCAR_GEN3,
RCAR_GEN2,
RCAR_H1,
RCAR_M1,
#ifdef CONFIG_OF
static const struct of_device_id rcar_vin_of_table[] = {
+ { .compatible = "renesas,vin-r8a7795", .data = (void *)RCAR_GEN3 },
{ .compatible = "renesas,vin-r8a7794", .data = (void *)RCAR_GEN2 },
{ .compatible = "renesas,vin-r8a7793", .data = (void *)RCAR_GEN2 },
{ .compatible = "renesas,vin-r8a7791", .data = (void *)RCAR_GEN2 },
unsigned int *count, unsigned int *num_planes,
unsigned int sizes[], void *alloc_ctxs[])
{
- struct soc_camera_device *icd = container_of(vq,
- struct soc_camera_device, vb2_vidq);
+ struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
static void sh_mobile_ceu_videobuf_queue(struct vb2_buffer *vb)
{
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct soc_camera_device *icd = container_of(vb->vb2_queue,
- struct soc_camera_device, vb2_vidq);
+ struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vbuf);
static void sh_mobile_ceu_videobuf_release(struct vb2_buffer *vb)
{
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct soc_camera_device *icd = container_of(vb->vb2_queue,
- struct soc_camera_device, vb2_vidq);
+ struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_buffer *buf = to_ceu_vb(vbuf);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
static int sh_mobile_ceu_videobuf_init(struct vb2_buffer *vb)
{
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
- struct soc_camera_device *icd = container_of(vb->vb2_queue,
- struct soc_camera_device, vb2_vidq);
+ struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
static void sh_mobile_ceu_stop_streaming(struct vb2_queue *q)
{
- struct soc_camera_device *icd = container_of(q, struct soc_camera_device, vb2_vidq);
+ struct soc_camera_device *icd = soc_camera_from_vb2q(q);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
struct list_head *buf_head, *tmp;
struct channel_info *tsin, int chan_num)
{
struct tda18212_config *tda18212;
- struct stv6110x_devctl *fe2;
+ const struct stv6110x_devctl *fe2;
struct i2c_client *client;
struct i2c_board_info tda18212_info = {
.type = "tda18212",
ti-vpe-y := vpe.o sc.o csc.o vpdma.o
ccflags-$(CONFIG_VIDEO_TI_VPE_DEBUG) += -DDEBUG
+
+obj-$(CONFIG_VIDEO_TI_CAL) += ti-cal.o
+
+ti-cal-y := cal.o
--- /dev/null
+/*
+ * TI CAL camera interface driver
+ *
+ * Copyright (c) 2015 Texas Instruments Inc.
+ * Benoit Parrot, <bparrot@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioctl.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+
+#include <media/v4l2-of.h>
+#include <media/v4l2-async.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-common.h>
+#include <media/videobuf2-core.h>
+#include <media/videobuf2-dma-contig.h>
+#include "cal_regs.h"
+
+#define CAL_MODULE_NAME "cal"
+
+#define MAX_WIDTH 1920
+#define MAX_HEIGHT 1200
+
+#define CAL_VERSION "0.1.0"
+
+MODULE_DESCRIPTION("TI CAL driver");
+MODULE_AUTHOR("Benoit Parrot, <bparrot@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(CAL_VERSION);
+
+static unsigned video_nr = -1;
+module_param(video_nr, uint, 0644);
+MODULE_PARM_DESC(video_nr, "videoX start number, -1 is autodetect");
+
+static unsigned debug;
+module_param(debug, uint, 0644);
+MODULE_PARM_DESC(debug, "activates debug info");
+
+/* timeperframe: min/max and default */
+static const struct v4l2_fract
+ tpf_default = {.numerator = 1001, .denominator = 30000};
+
+#define cal_dbg(level, caldev, fmt, arg...) \
+ v4l2_dbg(level, debug, &caldev->v4l2_dev, fmt, ##arg)
+#define cal_info(caldev, fmt, arg...) \
+ v4l2_info(&caldev->v4l2_dev, fmt, ##arg)
+#define cal_err(caldev, fmt, arg...) \
+ v4l2_err(&caldev->v4l2_dev, fmt, ##arg)
+
+#define ctx_dbg(level, ctx, fmt, arg...) \
+ v4l2_dbg(level, debug, &ctx->v4l2_dev, fmt, ##arg)
+#define ctx_info(ctx, fmt, arg...) \
+ v4l2_info(&ctx->v4l2_dev, fmt, ##arg)
+#define ctx_err(ctx, fmt, arg...) \
+ v4l2_err(&ctx->v4l2_dev, fmt, ##arg)
+
+#define CAL_NUM_INPUT 1
+#define CAL_NUM_CONTEXT 2
+
+#define bytes_per_line(pixel, bpp) (ALIGN(pixel * bpp, 16))
+
+#define reg_read(dev, offset) ioread32(dev->base + offset)
+#define reg_write(dev, offset, val) iowrite32(val, dev->base + offset)
+
+#define reg_read_field(dev, offset, mask) get_field(reg_read(dev, offset), \
+ mask)
+#define reg_write_field(dev, offset, field, mask) { \
+ u32 val = reg_read(dev, offset); \
+ set_field(&val, field, mask); \
+ reg_write(dev, offset, val); }
+
+/* ------------------------------------------------------------------
+ * Basic structures
+ * ------------------------------------------------------------------
+ */
+
+struct cal_fmt {
+ u32 fourcc;
+ u32 code;
+ u8 depth;
+};
+
+static struct cal_fmt cal_formats[] = {
+ {
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .code = MEDIA_BUS_FMT_YUYV8_2X8,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .code = MEDIA_BUS_FMT_UYVY8_2X8,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .code = MEDIA_BUS_FMT_YVYU8_2X8,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .code = MEDIA_BUS_FMT_VYUY8_2X8,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB565, /* gggbbbbb rrrrrggg */
+ .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB565X, /* rrrrrggg gggbbbbb */
+ .code = MEDIA_BUS_FMT_RGB565_2X8_BE,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB555, /* gggbbbbb arrrrrgg */
+ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB555X, /* arrrrrgg gggbbbbb */
+ .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_BE,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB24, /* rgb */
+ .code = MEDIA_BUS_FMT_RGB888_2X12_LE,
+ .depth = 24,
+ }, {
+ .fourcc = V4L2_PIX_FMT_BGR24, /* bgr */
+ .code = MEDIA_BUS_FMT_RGB888_2X12_BE,
+ .depth = 24,
+ }, {
+ .fourcc = V4L2_PIX_FMT_RGB32, /* argb */
+ .code = MEDIA_BUS_FMT_ARGB8888_1X32,
+ .depth = 32,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SBGGR8,
+ .code = MEDIA_BUS_FMT_SBGGR8_1X8,
+ .depth = 8,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGBRG8,
+ .code = MEDIA_BUS_FMT_SGBRG8_1X8,
+ .depth = 8,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGRBG8,
+ .code = MEDIA_BUS_FMT_SGRBG8_1X8,
+ .depth = 8,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SRGGB8,
+ .code = MEDIA_BUS_FMT_SRGGB8_1X8,
+ .depth = 8,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SBGGR10,
+ .code = MEDIA_BUS_FMT_SBGGR10_1X10,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGBRG10,
+ .code = MEDIA_BUS_FMT_SGBRG10_1X10,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGRBG10,
+ .code = MEDIA_BUS_FMT_SGRBG10_1X10,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SRGGB10,
+ .code = MEDIA_BUS_FMT_SRGGB10_1X10,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SBGGR12,
+ .code = MEDIA_BUS_FMT_SBGGR12_1X12,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGBRG12,
+ .code = MEDIA_BUS_FMT_SGBRG12_1X12,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SGRBG12,
+ .code = MEDIA_BUS_FMT_SGRBG12_1X12,
+ .depth = 16,
+ }, {
+ .fourcc = V4L2_PIX_FMT_SRGGB12,
+ .code = MEDIA_BUS_FMT_SRGGB12_1X12,
+ .depth = 16,
+ },
+};
+
+/* Print Four-character-code (FOURCC) */
+static char *fourcc_to_str(u32 fmt)
+{
+ static char code[5];
+
+ code[0] = (unsigned char)(fmt & 0xff);
+ code[1] = (unsigned char)((fmt >> 8) & 0xff);
+ code[2] = (unsigned char)((fmt >> 16) & 0xff);
+ code[3] = (unsigned char)((fmt >> 24) & 0xff);
+ code[4] = '\0';
+
+ return code;
+}
+
+/* buffer for one video frame */
+struct cal_buffer {
+ /* common v4l buffer stuff -- must be first */
+ struct vb2_v4l2_buffer vb;
+ struct list_head list;
+ const struct cal_fmt *fmt;
+};
+
+struct cal_dmaqueue {
+ struct list_head active;
+
+ /* Counters to control fps rate */
+ int frame;
+ int ini_jiffies;
+};
+
+struct cm_data {
+ void __iomem *base;
+ struct resource *res;
+
+ unsigned int camerrx_control;
+
+ struct platform_device *pdev;
+};
+
+struct cc_data {
+ void __iomem *base;
+ struct resource *res;
+
+ struct platform_device *pdev;
+};
+
+/*
+ * there is one cal_dev structure in the driver, it is shared by
+ * all instances.
+ */
+struct cal_dev {
+ int irq;
+ void __iomem *base;
+ struct resource *res;
+ struct platform_device *pdev;
+ struct v4l2_device v4l2_dev;
+
+ /* Control Module handle */
+ struct cm_data *cm;
+ /* Camera Core Module handle */
+ struct cc_data *cc[CAL_NUM_CSI2_PORTS];
+
+ struct cal_ctx *ctx[CAL_NUM_CONTEXT];
+};
+
+/*
+ * There is one cal_ctx structure for each camera core context.
+ */
+struct cal_ctx {
+ struct v4l2_device v4l2_dev;
+ struct v4l2_ctrl_handler ctrl_handler;
+ struct video_device vdev;
+ struct v4l2_async_notifier notifier;
+ struct v4l2_subdev *sensor;
+ struct v4l2_of_endpoint endpoint;
+
+ struct v4l2_async_subdev asd;
+ struct v4l2_async_subdev *asd_list[1];
+
+ struct v4l2_fh fh;
+ struct cal_dev *dev;
+ struct cc_data *cc;
+
+ /* v4l2_ioctl mutex */
+ struct mutex mutex;
+ /* v4l2 buffers lock */
+ spinlock_t slock;
+
+ /* Several counters */
+ unsigned long jiffies;
+
+ struct vb2_alloc_ctx *alloc_ctx;
+ struct cal_dmaqueue vidq;
+
+ /* Input Number */
+ int input;
+
+ /* video capture */
+ const struct cal_fmt *fmt;
+ /* Used to store current pixel format */
+ struct v4l2_format v_fmt;
+ /* Used to store current mbus frame format */
+ struct v4l2_mbus_framefmt m_fmt;
+
+ /* Current subdev enumerated format */
+ struct cal_fmt *active_fmt[ARRAY_SIZE(cal_formats)];
+ int num_active_fmt;
+
+ struct v4l2_fract timeperframe;
+ unsigned int sequence;
+ unsigned int external_rate;
+ struct vb2_queue vb_vidq;
+ unsigned int seq_count;
+ unsigned int csi2_port;
+ unsigned int virtual_channel;
+
+ /* Pointer pointing to current v4l2_buffer */
+ struct cal_buffer *cur_frm;
+ /* Pointer pointing to next v4l2_buffer */
+ struct cal_buffer *next_frm;
+};
+
+static const struct cal_fmt *find_format_by_pix(struct cal_ctx *ctx,
+ u32 pixelformat)
+{
+ const struct cal_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ctx->num_active_fmt; k++) {
+ fmt = ctx->active_fmt[k];
+ if (fmt->fourcc == pixelformat)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static const struct cal_fmt *find_format_by_code(struct cal_ctx *ctx,
+ u32 code)
+{
+ const struct cal_fmt *fmt;
+ unsigned int k;
+
+ for (k = 0; k < ctx->num_active_fmt; k++) {
+ fmt = ctx->active_fmt[k];
+ if (fmt->code == code)
+ return fmt;
+ }
+
+ return NULL;
+}
+
+static inline struct cal_ctx *notifier_to_ctx(struct v4l2_async_notifier *n)
+{
+ return container_of(n, struct cal_ctx, notifier);
+}
+
+static inline int get_field(u32 value, u32 mask)
+{
+ return (value & mask) >> __ffs(mask);
+}
+
+static inline void set_field(u32 *valp, u32 field, u32 mask)
+{
+ u32 val = *valp;
+
+ val &= ~mask;
+ val |= (field << __ffs(mask)) & mask;
+ *valp = val;
+}
+
+/*
+ * Control Module block access
+ */
+static struct cm_data *cm_create(struct cal_dev *dev)
+{
+ struct platform_device *pdev = dev->pdev;
+ struct cm_data *cm;
+
+ cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
+ if (!cm)
+ return ERR_PTR(-ENOMEM);
+
+ cm->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "camerrx_control");
+ cm->base = devm_ioremap_resource(&pdev->dev, cm->res);
+ if (IS_ERR(cm->base)) {
+ cal_err(dev, "failed to ioremap\n");
+ return cm->base;
+ }
+
+ cal_dbg(1, dev, "ioresource %s at %pa - %pa\n",
+ cm->res->name, &cm->res->start, &cm->res->end);
+
+ return cm;
+}
+
+static void camerarx_phy_enable(struct cal_ctx *ctx)
+{
+ u32 val;
+
+ if (!ctx->dev->cm->base) {
+ ctx_err(ctx, "cm not mapped\n");
+ return;
+ }
+
+ val = reg_read(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL);
+ if (ctx->csi2_port == 1) {
+ set_field(&val, 1, CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_MASK);
+ set_field(&val, 0, CM_CAMERRX_CTRL_CSI0_CAMMODE_MASK);
+ /* enable all lanes by default */
+ set_field(&val, 0xf, CM_CAMERRX_CTRL_CSI0_LANEENABLE_MASK);
+ set_field(&val, 1, CM_CAMERRX_CTRL_CSI0_MODE_MASK);
+ } else if (ctx->csi2_port == 2) {
+ set_field(&val, 1, CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_MASK);
+ set_field(&val, 0, CM_CAMERRX_CTRL_CSI1_CAMMODE_MASK);
+ /* enable all lanes by default */
+ set_field(&val, 0x3, CM_CAMERRX_CTRL_CSI1_LANEENABLE_MASK);
+ set_field(&val, 1, CM_CAMERRX_CTRL_CSI1_MODE_MASK);
+ }
+ reg_write(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL, val);
+}
+
+static void camerarx_phy_disable(struct cal_ctx *ctx)
+{
+ u32 val;
+
+ if (!ctx->dev->cm->base) {
+ ctx_err(ctx, "cm not mapped\n");
+ return;
+ }
+
+ val = reg_read(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL);
+ if (ctx->csi2_port == 1)
+ set_field(&val, 0x0, CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_MASK);
+ else if (ctx->csi2_port == 2)
+ set_field(&val, 0x0, CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_MASK);
+ reg_write(ctx->dev->cm, CM_CTRL_CORE_CAMERRX_CONTROL, val);
+}
+
+/*
+ * Camera Instance access block
+ */
+static struct cc_data *cc_create(struct cal_dev *dev, unsigned int core)
+{
+ struct platform_device *pdev = dev->pdev;
+ struct cc_data *cc;
+
+ cc = devm_kzalloc(&pdev->dev, sizeof(*cc), GFP_KERNEL);
+ if (!cc)
+ return ERR_PTR(-ENOMEM);
+
+ cc->res = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM,
+ (core == 0) ?
+ "cal_rx_core0" :
+ "cal_rx_core1");
+ cc->base = devm_ioremap_resource(&pdev->dev, cc->res);
+ if (IS_ERR(cc->base)) {
+ cal_err(dev, "failed to ioremap\n");
+ return cc->base;
+ }
+
+ cal_dbg(1, dev, "ioresource %s at %pa - %pa\n",
+ cc->res->name, &cc->res->start, &cc->res->end);
+
+ return cc;
+}
+
+/*
+ * Get Revision and HW info
+ */
+static void cal_get_hwinfo(struct cal_dev *dev)
+{
+ u32 revision = 0;
+ u32 hwinfo = 0;
+
+ revision = reg_read(dev, CAL_HL_REVISION);
+ cal_dbg(3, dev, "CAL_HL_REVISION = 0x%08x (expecting 0x40000200)\n",
+ revision);
+
+ hwinfo = reg_read(dev, CAL_HL_HWINFO);
+ cal_dbg(3, dev, "CAL_HL_HWINFO = 0x%08x (expecting 0xA3C90469)\n",
+ hwinfo);
+}
+
+static inline int cal_runtime_get(struct cal_dev *dev)
+{
+ int r;
+
+ r = pm_runtime_get_sync(&dev->pdev->dev);
+
+ return r;
+}
+
+static inline void cal_runtime_put(struct cal_dev *dev)
+{
+ pm_runtime_put_sync(&dev->pdev->dev);
+}
+
+static void cal_quickdump_regs(struct cal_dev *dev)
+{
+ cal_info(dev, "CAL Registers @ 0x%pa:\n", &dev->res->start);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
+ dev->base, resource_size(dev->res), false);
+
+ if (dev->ctx[0]) {
+ cal_info(dev, "CSI2 Core 0 Registers @ %pa:\n",
+ &dev->ctx[0]->cc->res->start);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
+ dev->ctx[0]->cc->base,
+ resource_size(dev->ctx[0]->cc->res),
+ false);
+ }
+
+ if (dev->ctx[1]) {
+ cal_info(dev, "CSI2 Core 1 Registers @ %pa:\n",
+ &dev->ctx[1]->cc->res->start);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
+ dev->ctx[1]->cc->base,
+ resource_size(dev->ctx[1]->cc->res),
+ false);
+ }
+
+ cal_info(dev, "CAMERRX_Control Registers @ %pa:\n",
+ &dev->cm->res->start);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
+ dev->cm->base,
+ resource_size(dev->cm->res), false);
+}
+
+/*
+ * Enable the expected IRQ sources
+ */
+static void enable_irqs(struct cal_ctx *ctx)
+{
+ /* Enable IRQ_WDMA_END 0/1 */
+ reg_write_field(ctx->dev,
+ CAL_HL_IRQENABLE_SET(2),
+ CAL_HL_IRQ_ENABLE,
+ CAL_HL_IRQ_MASK(ctx->csi2_port));
+ /* Enable IRQ_WDMA_START 0/1 */
+ reg_write_field(ctx->dev,
+ CAL_HL_IRQENABLE_SET(3),
+ CAL_HL_IRQ_ENABLE,
+ CAL_HL_IRQ_MASK(ctx->csi2_port));
+ /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
+ reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0xFF000000);
+}
+
+static void disable_irqs(struct cal_ctx *ctx)
+{
+ /* Disable IRQ_WDMA_END 0/1 */
+ reg_write_field(ctx->dev,
+ CAL_HL_IRQENABLE_CLR(2),
+ CAL_HL_IRQ_CLEAR,
+ CAL_HL_IRQ_MASK(ctx->csi2_port));
+ /* Disable IRQ_WDMA_START 0/1 */
+ reg_write_field(ctx->dev,
+ CAL_HL_IRQENABLE_CLR(3),
+ CAL_HL_IRQ_CLEAR,
+ CAL_HL_IRQ_MASK(ctx->csi2_port));
+ /* Todo: Add VC_IRQ and CSI2_COMPLEXIO_IRQ handling */
+ reg_write(ctx->dev, CAL_CSI2_VC_IRQENABLE(1), 0);
+}
+
+static void csi2_init(struct cal_ctx *ctx)
+{
+ int i;
+ u32 val;
+
+ val = reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port));
+ set_field(&val, CAL_GEN_ENABLE,
+ CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK);
+ set_field(&val, CAL_GEN_ENABLE,
+ CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK);
+ set_field(&val, CAL_GEN_DISABLE,
+ CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK);
+ set_field(&val, 407, CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK);
+ reg_write(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port), val);
+ ctx_dbg(3, ctx, "CAL_CSI2_TIMING(%d) = 0x%08x\n", ctx->csi2_port,
+ reg_read(ctx->dev, CAL_CSI2_TIMING(ctx->csi2_port)));
+
+ val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
+ set_field(&val, CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL,
+ CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
+ set_field(&val, CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON,
+ CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK);
+ reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
+ for (i = 0; i < 10; i++) {
+ if (reg_read_field(ctx->dev,
+ CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port),
+ CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK) ==
+ CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_ON)
+ break;
+ usleep_range(1000, 1100);
+ }
+ ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n", ctx->csi2_port,
+ reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port)));
+
+ val = reg_read(ctx->dev, CAL_CTRL);
+ set_field(&val, CAL_CTRL_BURSTSIZE_BURST128, CAL_CTRL_BURSTSIZE_MASK);
+ set_field(&val, 0xF, CAL_CTRL_TAGCNT_MASK);
+ set_field(&val, CAL_CTRL_POSTED_WRITES_NONPOSTED,
+ CAL_CTRL_POSTED_WRITES_MASK);
+ set_field(&val, 0xFF, CAL_CTRL_MFLAGL_MASK);
+ set_field(&val, 0xFF, CAL_CTRL_MFLAGH_MASK);
+ reg_write(ctx->dev, CAL_CTRL, val);
+ ctx_dbg(3, ctx, "CAL_CTRL = 0x%08x\n", reg_read(ctx->dev, CAL_CTRL));
+}
+
+static void csi2_lane_config(struct cal_ctx *ctx)
+{
+ u32 val = reg_read(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port));
+ u32 lane_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK;
+ u32 polarity_mask = CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK;
+ struct v4l2_of_bus_mipi_csi2 *mipi_csi2 = &ctx->endpoint.bus.mipi_csi2;
+ int lane;
+
+ set_field(&val, mipi_csi2->clock_lane + 1, lane_mask);
+ set_field(&val, mipi_csi2->lane_polarities[0], polarity_mask);
+ for (lane = 0; lane < mipi_csi2->num_data_lanes; lane++) {
+ /*
+ * Every lane are one nibble apart starting with the
+ * clock followed by the data lanes so shift masks by 4.
+ */
+ lane_mask <<= 4;
+ polarity_mask <<= 4;
+ set_field(&val, mipi_csi2->data_lanes[lane] + 1, lane_mask);
+ set_field(&val, mipi_csi2->lane_polarities[lane + 1],
+ polarity_mask);
+ }
+
+ reg_write(ctx->dev, CAL_CSI2_COMPLEXIO_CFG(ctx->csi2_port), val);
+ ctx_dbg(3, ctx, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x\n",
+ ctx->csi2_port, val);
+}
+
+static void csi2_ppi_enable(struct cal_ctx *ctx)
+{
+ reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port),
+ CAL_GEN_ENABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
+}
+
+static void csi2_ppi_disable(struct cal_ctx *ctx)
+{
+ reg_write_field(ctx->dev, CAL_CSI2_PPI_CTRL(ctx->csi2_port),
+ CAL_GEN_DISABLE, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
+}
+
+static void csi2_ctx_config(struct cal_ctx *ctx)
+{
+ u32 val;
+
+ val = reg_read(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port));
+ set_field(&val, ctx->csi2_port, CAL_CSI2_CTX_CPORT_MASK);
+ /*
+ * DT type: MIPI CSI-2 Specs
+ * 0x1: All - DT filter is disabled
+ * 0x24: RGB888 1 pixel = 3 bytes
+ * 0x2B: RAW10 4 pixels = 5 bytes
+ * 0x2A: RAW8 1 pixel = 1 byte
+ * 0x1E: YUV422 2 pixels = 4 bytes
+ */
+ set_field(&val, 0x1, CAL_CSI2_CTX_DT_MASK);
+ /* Virtual Channel from the CSI2 sensor usually 0! */
+ set_field(&val, ctx->virtual_channel, CAL_CSI2_CTX_VC_MASK);
+ /* NUM_LINES_PER_FRAME => 0 means auto detect */
+ set_field(&val, 0, CAL_CSI2_CTX_LINES_MASK);
+ set_field(&val, CAL_CSI2_CTX_ATT_PIX, CAL_CSI2_CTX_ATT_MASK);
+ set_field(&val, CAL_CSI2_CTX_PACK_MODE_LINE,
+ CAL_CSI2_CTX_PACK_MODE_MASK);
+ reg_write(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port), val);
+ ctx_dbg(3, ctx, "CAL_CSI2_CTX0(%d) = 0x%08x\n", ctx->csi2_port,
+ reg_read(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port)));
+}
+
+static void pix_proc_config(struct cal_ctx *ctx)
+{
+ u32 val;
+
+ val = reg_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port));
+ set_field(&val, CAL_PIX_PROC_EXTRACT_B8, CAL_PIX_PROC_EXTRACT_MASK);
+ set_field(&val, CAL_PIX_PROC_DPCMD_BYPASS, CAL_PIX_PROC_DPCMD_MASK);
+ set_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK);
+ set_field(&val, CAL_PIX_PROC_PACK_B8, CAL_PIX_PROC_PACK_MASK);
+ set_field(&val, ctx->csi2_port, CAL_PIX_PROC_CPORT_MASK);
+ set_field(&val, CAL_GEN_ENABLE, CAL_PIX_PROC_EN_MASK);
+ reg_write(ctx->dev, CAL_PIX_PROC(ctx->csi2_port), val);
+ ctx_dbg(3, ctx, "CAL_PIX_PROC(%d) = 0x%08x\n", ctx->csi2_port,
+ reg_read(ctx->dev, CAL_PIX_PROC(ctx->csi2_port)));
+}
+
+static void cal_wr_dma_config(struct cal_ctx *ctx,
+ unsigned int width)
+{
+ u32 val;
+
+ val = reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port));
+ set_field(&val, ctx->csi2_port, CAL_WR_DMA_CTRL_CPORT_MASK);
+ set_field(&val, CAL_WR_DMA_CTRL_DTAG_PIX_DAT,
+ CAL_WR_DMA_CTRL_DTAG_MASK);
+ set_field(&val, CAL_WR_DMA_CTRL_MODE_CONST,
+ CAL_WR_DMA_CTRL_MODE_MASK);
+ set_field(&val, CAL_WR_DMA_CTRL_PATTERN_LINEAR,
+ CAL_WR_DMA_CTRL_PATTERN_MASK);
+ set_field(&val, CAL_GEN_ENABLE, CAL_WR_DMA_CTRL_STALL_RD_MASK);
+ reg_write(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port), val);
+ ctx_dbg(3, ctx, "CAL_WR_DMA_CTRL(%d) = 0x%08x\n", ctx->csi2_port,
+ reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port)));
+
+ /*
+ * width/16 not sure but giving it a whirl.
+ * zero does not work right
+ */
+ reg_write_field(ctx->dev,
+ CAL_WR_DMA_OFST(ctx->csi2_port),
+ (width / 16),
+ CAL_WR_DMA_OFST_MASK);
+ ctx_dbg(3, ctx, "CAL_WR_DMA_OFST(%d) = 0x%08x\n", ctx->csi2_port,
+ reg_read(ctx->dev, CAL_WR_DMA_OFST(ctx->csi2_port)));
+
+ val = reg_read(ctx->dev, CAL_WR_DMA_XSIZE(ctx->csi2_port));
+ /* 64 bit word means no skipping */
+ set_field(&val, 0, CAL_WR_DMA_XSIZE_XSKIP_MASK);
+ /*
+ * (width*8)/64 this should be size of an entire line
+ * in 64bit word but 0 means all data until the end
+ * is detected automagically
+ */
+ set_field(&val, (width / 8), CAL_WR_DMA_XSIZE_MASK);
+ reg_write(ctx->dev, CAL_WR_DMA_XSIZE(ctx->csi2_port), val);
+ ctx_dbg(3, ctx, "CAL_WR_DMA_XSIZE(%d) = 0x%08x\n", ctx->csi2_port,
+ reg_read(ctx->dev, CAL_WR_DMA_XSIZE(ctx->csi2_port)));
+}
+
+static void cal_wr_dma_addr(struct cal_ctx *ctx, unsigned int dmaaddr)
+{
+ reg_write(ctx->dev, CAL_WR_DMA_ADDR(ctx->csi2_port), dmaaddr);
+}
+
+/*
+ * TCLK values are OK at their reset values
+ */
+#define TCLK_TERM 0
+#define TCLK_MISS 1
+#define TCLK_SETTLE 14
+#define THS_SETTLE 15
+
+static void csi2_phy_config(struct cal_ctx *ctx)
+{
+ unsigned int reg0, reg1;
+ unsigned int ths_term, ths_settle;
+ unsigned int ddrclkperiod_us;
+
+ /*
+ * THS_TERM: Programmed value = floor(20 ns/DDRClk period) - 2.
+ */
+ ddrclkperiod_us = ctx->external_rate / 2000000;
+ ddrclkperiod_us = 1000000 / ddrclkperiod_us;
+ ctx_dbg(1, ctx, "ddrclkperiod_us: %d\n", ddrclkperiod_us);
+
+ ths_term = 20000 / ddrclkperiod_us;
+ ths_term = (ths_term >= 2) ? ths_term - 2 : ths_term;
+ ctx_dbg(1, ctx, "ths_term: %d (0x%02x)\n", ths_term, ths_term);
+
+ /*
+ * THS_SETTLE: Programmed value = floor(176.3 ns/CtrlClk period) - 1.
+ * Since CtrlClk is fixed at 96Mhz then we get
+ * ths_settle = floor(176.3 / 10.416) - 1 = 15
+ * If we ever switch to a dynamic clock then this code might be useful
+ *
+ * unsigned int ctrlclkperiod_us;
+ * ctrlclkperiod_us = 96000000 / 1000000;
+ * ctrlclkperiod_us = 1000000 / ctrlclkperiod_us;
+ * ctx_dbg(1, ctx, "ctrlclkperiod_us: %d\n", ctrlclkperiod_us);
+
+ * ths_settle = 176300 / ctrlclkperiod_us;
+ * ths_settle = (ths_settle > 1) ? ths_settle - 1 : ths_settle;
+ */
+
+ ths_settle = THS_SETTLE;
+ ctx_dbg(1, ctx, "ths_settle: %d (0x%02x)\n", ths_settle, ths_settle);
+
+ reg0 = reg_read(ctx->cc, CAL_CSI2_PHY_REG0);
+ set_field(®0, CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE,
+ CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK);
+ set_field(®0, ths_term, CAL_CSI2_PHY_REG0_THS_TERM_MASK);
+ set_field(®0, ths_settle, CAL_CSI2_PHY_REG0_THS_SETTLE_MASK);
+
+ ctx_dbg(1, ctx, "CSI2_%d_REG0 = 0x%08x\n", (ctx->csi2_port - 1), reg0);
+ reg_write(ctx->cc, CAL_CSI2_PHY_REG0, reg0);
+
+ reg1 = reg_read(ctx->cc, CAL_CSI2_PHY_REG1);
+ set_field(®1, TCLK_TERM, CAL_CSI2_PHY_REG1_TCLK_TERM_MASK);
+ set_field(®1, 0xb8, CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK);
+ set_field(®1, TCLK_MISS, CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK);
+ set_field(®1, TCLK_SETTLE, CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK);
+
+ ctx_dbg(1, ctx, "CSI2_%d_REG1 = 0x%08x\n", (ctx->csi2_port - 1), reg1);
+ reg_write(ctx->cc, CAL_CSI2_PHY_REG1, reg1);
+}
+
+static int cal_get_external_info(struct cal_ctx *ctx)
+{
+ struct v4l2_ctrl *ctrl;
+
+ ctrl = v4l2_ctrl_find(ctx->sensor->ctrl_handler, V4L2_CID_PIXEL_RATE);
+ if (!ctrl) {
+ ctx_err(ctx, "no pixel rate control in subdev: %s\n",
+ ctx->sensor->name);
+ return -EPIPE;
+ }
+
+ ctx->external_rate = v4l2_ctrl_g_ctrl_int64(ctrl);
+ ctx_dbg(3, ctx, "sensor Pixel Rate: %d\n", ctx->external_rate);
+
+ return 0;
+}
+
+static inline void cal_schedule_next_buffer(struct cal_ctx *ctx)
+{
+ struct cal_dmaqueue *dma_q = &ctx->vidq;
+ struct cal_buffer *buf;
+ unsigned long addr;
+
+ buf = list_entry(dma_q->active.next, struct cal_buffer, list);
+ ctx->next_frm = buf;
+ list_del(&buf->list);
+
+ addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
+ cal_wr_dma_addr(ctx, addr);
+}
+
+static inline void cal_process_buffer_complete(struct cal_ctx *ctx)
+{
+ ctx->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns();
+ ctx->cur_frm->vb.field = ctx->m_fmt.field;
+ ctx->cur_frm->vb.sequence = ctx->sequence++;
+
+ vb2_buffer_done(&ctx->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
+ ctx->cur_frm = ctx->next_frm;
+}
+
+#define isvcirqset(irq, vc, ff) (irq & \
+ (CAL_CSI2_VC_IRQENABLE_ ##ff ##_IRQ_##vc ##_MASK))
+
+#define isportirqset(irq, port) (irq & CAL_HL_IRQ_MASK(port))
+
+static irqreturn_t cal_irq(int irq_cal, void *data)
+{
+ struct cal_dev *dev = (struct cal_dev *)data;
+ struct cal_ctx *ctx;
+ struct cal_dmaqueue *dma_q;
+ u32 irqst2, irqst3;
+
+ /* Check which DMA just finished */
+ irqst2 = reg_read(dev, CAL_HL_IRQSTATUS(2));
+ if (irqst2) {
+ /* Clear Interrupt status */
+ reg_write(dev, CAL_HL_IRQSTATUS(2), irqst2);
+
+ /* Need to check both port */
+ if (isportirqset(irqst2, 1)) {
+ ctx = dev->ctx[0];
+
+ if (ctx->cur_frm != ctx->next_frm)
+ cal_process_buffer_complete(ctx);
+ }
+
+ if (isportirqset(irqst2, 2)) {
+ ctx = dev->ctx[1];
+
+ if (ctx->cur_frm != ctx->next_frm)
+ cal_process_buffer_complete(ctx);
+ }
+ }
+
+ /* Check which DMA just started */
+ irqst3 = reg_read(dev, CAL_HL_IRQSTATUS(3));
+ if (irqst3) {
+ /* Clear Interrupt status */
+ reg_write(dev, CAL_HL_IRQSTATUS(3), irqst3);
+
+ /* Need to check both port */
+ if (isportirqset(irqst3, 1)) {
+ ctx = dev->ctx[0];
+ dma_q = &ctx->vidq;
+
+ spin_lock(&ctx->slock);
+ if (!list_empty(&dma_q->active) &&
+ ctx->cur_frm == ctx->next_frm)
+ cal_schedule_next_buffer(ctx);
+ spin_unlock(&ctx->slock);
+ }
+
+ if (isportirqset(irqst3, 2)) {
+ ctx = dev->ctx[1];
+ dma_q = &ctx->vidq;
+
+ spin_lock(&ctx->slock);
+ if (!list_empty(&dma_q->active) &&
+ ctx->cur_frm == ctx->next_frm)
+ cal_schedule_next_buffer(ctx);
+ spin_unlock(&ctx->slock);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * video ioctls
+ */
+static int cal_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct cal_ctx *ctx = video_drvdata(file);
+
+ strlcpy(cap->driver, CAL_MODULE_NAME, sizeof(cap->driver));
+ strlcpy(cap->card, CAL_MODULE_NAME, sizeof(cap->card));
+
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "platform:%s", ctx->v4l2_dev.name);
+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+ return 0;
+}
+
+static int cal_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ struct cal_ctx *ctx = video_drvdata(file);
+ const struct cal_fmt *fmt = NULL;
+
+ if (f->index >= ctx->num_active_fmt)
+ return -EINVAL;
+
+ fmt = ctx->active_fmt[f->index];
+
+ f->pixelformat = fmt->fourcc;
+ f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ return 0;
+}
+
+static int __subdev_get_format(struct cal_ctx *ctx,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ struct v4l2_subdev_format sd_fmt;
+ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
+ int ret;
+
+ if (!ctx->sensor)
+ return -EINVAL;
+
+ sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ sd_fmt.pad = 0;
+
+ ret = v4l2_subdev_call(ctx->sensor, pad, get_fmt, NULL, &sd_fmt);
+ if (ret)
+ return ret;
+
+ *fmt = *mbus_fmt;
+
+ ctx_dbg(1, ctx, "%s %dx%d code:%04X\n", __func__,
+ fmt->width, fmt->height, fmt->code);
+
+ return 0;
+}
+
+static int __subdev_set_format(struct cal_ctx *ctx,
+ struct v4l2_mbus_framefmt *fmt)
+{
+ struct v4l2_subdev_format sd_fmt;
+ struct v4l2_mbus_framefmt *mbus_fmt = &sd_fmt.format;
+ int ret;
+
+ if (!ctx->sensor)
+ return -EINVAL;
+
+ sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ sd_fmt.pad = 0;
+ *mbus_fmt = *fmt;
+
+ ret = v4l2_subdev_call(ctx->sensor, pad, set_fmt, NULL, &sd_fmt);
+ if (ret)
+ return ret;
+
+ ctx_dbg(1, ctx, "%s %dx%d code:%04X\n", __func__,
+ fmt->width, fmt->height, fmt->code);
+
+ return 0;
+}
+
+static int cal_calc_format_size(struct cal_ctx *ctx,
+ const struct cal_fmt *fmt,
+ struct v4l2_format *f)
+{
+ if (!fmt) {
+ ctx_dbg(3, ctx, "No cal_fmt provided!\n");
+ return -EINVAL;
+ }
+
+ v4l_bound_align_image(&f->fmt.pix.width, 48, MAX_WIDTH, 2,
+ &f->fmt.pix.height, 32, MAX_HEIGHT, 0, 0);
+ f->fmt.pix.bytesperline = bytes_per_line(f->fmt.pix.width,
+ fmt->depth >> 3);
+ f->fmt.pix.sizeimage = f->fmt.pix.height *
+ f->fmt.pix.bytesperline;
+
+ ctx_dbg(3, ctx, "%s: fourcc: %s size: %dx%d bpl:%d img_size:%d\n",
+ __func__, fourcc_to_str(f->fmt.pix.pixelformat),
+ f->fmt.pix.width, f->fmt.pix.height,
+ f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
+
+ return 0;
+}
+
+static int cal_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct cal_ctx *ctx = video_drvdata(file);
+
+ *f = ctx->v_fmt;
+
+ return 0;
+}
+
+static int cal_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct cal_ctx *ctx = video_drvdata(file);
+ const struct cal_fmt *fmt;
+ struct v4l2_subdev_frame_size_enum fse;
+ int ret, found;
+
+ fmt = find_format_by_pix(ctx, f->fmt.pix.pixelformat);
+ if (!fmt) {
+ ctx_dbg(3, ctx, "Fourcc format (0x%08x) not found.\n",
+ f->fmt.pix.pixelformat);
+
+ /* Just get the first one enumerated */
+ fmt = ctx->active_fmt[0];
+ f->fmt.pix.pixelformat = fmt->fourcc;
+ }
+
+ f->fmt.pix.field = ctx->v_fmt.fmt.pix.field;
+
+ /* check for/find a valid width/height */
+ ret = 0;
+ found = false;
+ fse.pad = 0;
+ fse.code = fmt->code;
+ fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ for (fse.index = 0; ; fse.index++) {
+ ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size,
+ NULL, &fse);
+ if (ret)
+ break;
+
+ if ((f->fmt.pix.width == fse.max_width) &&
+ (f->fmt.pix.height == fse.max_height)) {
+ found = true;
+ break;
+ } else if ((f->fmt.pix.width >= fse.min_width) &&
+ (f->fmt.pix.width <= fse.max_width) &&
+ (f->fmt.pix.height >= fse.min_height) &&
+ (f->fmt.pix.height <= fse.max_height)) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ /* use existing values as default */
+ f->fmt.pix.width = ctx->v_fmt.fmt.pix.width;
+ f->fmt.pix.height = ctx->v_fmt.fmt.pix.height;
+ }
+
+ /*
+ * Use current colorspace for now, it will get
+ * updated properly during s_fmt
+ */
+ f->fmt.pix.colorspace = ctx->v_fmt.fmt.pix.colorspace;
+ return cal_calc_format_size(ctx, fmt, f);
+}
+
+static int cal_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct cal_ctx *ctx = video_drvdata(file);
+ struct vb2_queue *q = &ctx->vb_vidq;
+ const struct cal_fmt *fmt;
+ struct v4l2_mbus_framefmt mbus_fmt;
+ int ret;
+
+ if (vb2_is_busy(q)) {
+ ctx_dbg(3, ctx, "%s device busy\n", __func__);
+ return -EBUSY;
+ }
+
+ ret = cal_try_fmt_vid_cap(file, priv, f);
+ if (ret < 0)
+ return ret;
+
+ fmt = find_format_by_pix(ctx, f->fmt.pix.pixelformat);
+
+ v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, fmt->code);
+
+ ret = __subdev_set_format(ctx, &mbus_fmt);
+ if (ret)
+ return ret;
+
+ /* Just double check nothing has gone wrong */
+ if (mbus_fmt.code != fmt->code) {
+ ctx_dbg(3, ctx,
+ "%s subdev changed format on us, this should not happen\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ v4l2_fill_pix_format(&ctx->v_fmt.fmt.pix, &mbus_fmt);
+ ctx->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ ctx->v_fmt.fmt.pix.pixelformat = fmt->fourcc;
+ cal_calc_format_size(ctx, fmt, &ctx->v_fmt);
+ ctx->fmt = fmt;
+ ctx->m_fmt = mbus_fmt;
+ *f = ctx->v_fmt;
+
+ return 0;
+}
+
+static int cal_enum_framesizes(struct file *file, void *fh,
+ struct v4l2_frmsizeenum *fsize)
+{
+ struct cal_ctx *ctx = video_drvdata(file);
+ const struct cal_fmt *fmt;
+ struct v4l2_subdev_frame_size_enum fse;
+ int ret;
+
+ /* check for valid format */
+ fmt = find_format_by_pix(ctx, fsize->pixel_format);
+ if (!fmt) {
+ ctx_dbg(3, ctx, "Invalid pixel code: %x\n",
+ fsize->pixel_format);
+ return -EINVAL;
+ }
+
+ fse.index = fsize->index;
+ fse.pad = 0;
+ fse.code = fmt->code;
+
+ ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size, NULL, &fse);
+ if (ret)
+ return -EINVAL;
+
+ ctx_dbg(1, ctx, "%s: index: %d code: %x W:[%d,%d] H:[%d,%d]\n",
+ __func__, fse.index, fse.code, fse.min_width, fse.max_width,
+ fse.min_height, fse.max_height);
+
+ fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+ fsize->discrete.width = fse.max_width;
+ fsize->discrete.height = fse.max_height;
+
+ return 0;
+}
+
+static int cal_enum_input(struct file *file, void *priv,
+ struct v4l2_input *inp)
+{
+ if (inp->index >= CAL_NUM_INPUT)
+ return -EINVAL;
+
+ inp->type = V4L2_INPUT_TYPE_CAMERA;
+ sprintf(inp->name, "Camera %u", inp->index);
+ return 0;
+}
+
+static int cal_g_input(struct file *file, void *priv, unsigned int *i)
+{
+ struct cal_ctx *ctx = video_drvdata(file);
+
+ *i = ctx->input;
+ return 0;
+}
+
+static int cal_s_input(struct file *file, void *priv, unsigned int i)
+{
+ struct cal_ctx *ctx = video_drvdata(file);
+
+ if (i >= CAL_NUM_INPUT)
+ return -EINVAL;
+
+ ctx->input = i;
+ return 0;
+}
+
+/* timeperframe is arbitrary and continuous */
+static int cal_enum_frameintervals(struct file *file, void *priv,
+ struct v4l2_frmivalenum *fival)
+{
+ struct cal_ctx *ctx = video_drvdata(file);
+ const struct cal_fmt *fmt;
+ struct v4l2_subdev_frame_size_enum fse;
+ int ret;
+
+ if (fival->index)
+ return -EINVAL;
+
+ fmt = find_format_by_pix(ctx, fival->pixel_format);
+ if (!fmt)
+ return -EINVAL;
+
+ /* check for valid width/height */
+ ret = 0;
+ fse.pad = 0;
+ fse.code = fmt->code;
+ fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+ for (fse.index = 0; ; fse.index++) {
+ ret = v4l2_subdev_call(ctx->sensor, pad, enum_frame_size,
+ NULL, &fse);
+ if (ret)
+ return -EINVAL;
+
+ if ((fival->width == fse.max_width) &&
+ (fival->height == fse.max_height))
+ break;
+ else if ((fival->width >= fse.min_width) &&
+ (fival->width <= fse.max_width) &&
+ (fival->height >= fse.min_height) &&
+ (fival->height <= fse.max_height))
+ break;
+
+ return -EINVAL;
+ }
+
+ fival->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+ fival->discrete.numerator = 1;
+ fival->discrete.denominator = 30;
+
+ return 0;
+}
+
+/*
+ * Videobuf operations
+ */
+static int cal_queue_setup(struct vb2_queue *vq,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], void *alloc_ctxs[])
+{
+ struct cal_ctx *ctx = vb2_get_drv_priv(vq);
+ unsigned size = ctx->v_fmt.fmt.pix.sizeimage;
+
+ if (vq->num_buffers + *nbuffers < 3)
+ *nbuffers = 3 - vq->num_buffers;
+ alloc_ctxs[0] = ctx->alloc_ctx;
+
+ if (*nplanes) {
+ if (sizes[0] < size)
+ return -EINVAL;
+ size = sizes[0];
+ }
+
+ *nplanes = 1;
+ sizes[0] = size;
+
+ ctx_dbg(3, ctx, "nbuffers=%d, size=%d\n", *nbuffers, sizes[0]);
+
+ return 0;
+}
+
+static int cal_buffer_prepare(struct vb2_buffer *vb)
+{
+ struct cal_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct cal_buffer *buf = container_of(vb, struct cal_buffer,
+ vb.vb2_buf);
+ unsigned long size;
+
+ if (WARN_ON(!ctx->fmt))
+ return -EINVAL;
+
+ size = ctx->v_fmt.fmt.pix.sizeimage;
+ if (vb2_plane_size(vb, 0) < size) {
+ ctx_err(ctx,
+ "data will not fit into plane (%lu < %lu)\n",
+ vb2_plane_size(vb, 0), size);
+ return -EINVAL;
+ }
+
+ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
+ return 0;
+}
+
+static void cal_buffer_queue(struct vb2_buffer *vb)
+{
+ struct cal_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
+ struct cal_buffer *buf = container_of(vb, struct cal_buffer,
+ vb.vb2_buf);
+ struct cal_dmaqueue *vidq = &ctx->vidq;
+ unsigned long flags = 0;
+
+ /* recheck locking */
+ spin_lock_irqsave(&ctx->slock, flags);
+ list_add_tail(&buf->list, &vidq->active);
+ spin_unlock_irqrestore(&ctx->slock, flags);
+}
+
+static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct cal_ctx *ctx = vb2_get_drv_priv(vq);
+ struct cal_dmaqueue *dma_q = &ctx->vidq;
+ struct cal_buffer *buf, *tmp;
+ unsigned long addr = 0;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&ctx->slock, flags);
+ if (list_empty(&dma_q->active)) {
+ spin_unlock_irqrestore(&ctx->slock, flags);
+ ctx_dbg(3, ctx, "buffer queue is empty\n");
+ return -EIO;
+ }
+
+ buf = list_entry(dma_q->active.next, struct cal_buffer, list);
+ ctx->cur_frm = buf;
+ ctx->next_frm = buf;
+ list_del(&buf->list);
+ spin_unlock_irqrestore(&ctx->slock, flags);
+
+ addr = vb2_dma_contig_plane_dma_addr(&ctx->cur_frm->vb.vb2_buf, 0);
+ ctx->sequence = 0;
+
+ ret = cal_get_external_info(ctx);
+ if (ret < 0)
+ goto err;
+
+ cal_runtime_get(ctx->dev);
+
+ enable_irqs(ctx);
+ camerarx_phy_enable(ctx);
+ csi2_init(ctx);
+ csi2_phy_config(ctx);
+ csi2_lane_config(ctx);
+ csi2_ctx_config(ctx);
+ pix_proc_config(ctx);
+ cal_wr_dma_config(ctx, ctx->v_fmt.fmt.pix.bytesperline);
+ cal_wr_dma_addr(ctx, addr);
+ csi2_ppi_enable(ctx);
+
+ if (ctx->sensor) {
+ if (v4l2_subdev_call(ctx->sensor, video, s_stream, 1)) {
+ ctx_err(ctx, "stream on failed in subdev\n");
+ cal_runtime_put(ctx->dev);
+ ret = -EINVAL;
+ goto err;
+ }
+ }
+
+ if (debug >= 4)
+ cal_quickdump_regs(ctx->dev);
+
+ return 0;
+
+err:
+ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
+ }
+ return ret;
+}
+
+static void cal_stop_streaming(struct vb2_queue *vq)
+{
+ struct cal_ctx *ctx = vb2_get_drv_priv(vq);
+ struct cal_dmaqueue *dma_q = &ctx->vidq;
+ struct cal_buffer *buf, *tmp;
+ unsigned long flags;
+
+ if (ctx->sensor) {
+ if (v4l2_subdev_call(ctx->sensor, video, s_stream, 0))
+ ctx_err(ctx, "stream off failed in subdev\n");
+ }
+
+ csi2_ppi_disable(ctx);
+ disable_irqs(ctx);
+
+ /* Release all active buffers */
+ spin_lock_irqsave(&ctx->slock, flags);
+ list_for_each_entry_safe(buf, tmp, &dma_q->active, list) {
+ list_del(&buf->list);
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ }
+
+ if (ctx->cur_frm == ctx->next_frm) {
+ vb2_buffer_done(&ctx->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ } else {
+ vb2_buffer_done(&ctx->cur_frm->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+ vb2_buffer_done(&ctx->next_frm->vb.vb2_buf,
+ VB2_BUF_STATE_ERROR);
+ }
+ ctx->cur_frm = NULL;
+ ctx->next_frm = NULL;
+ spin_unlock_irqrestore(&ctx->slock, flags);
+
+ cal_runtime_put(ctx->dev);
+}
+
+static struct vb2_ops cal_video_qops = {
+ .queue_setup = cal_queue_setup,
+ .buf_prepare = cal_buffer_prepare,
+ .buf_queue = cal_buffer_queue,
+ .start_streaming = cal_start_streaming,
+ .stop_streaming = cal_stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+static const struct v4l2_file_operations cal_fops = {
+ .owner = THIS_MODULE,
+ .open = v4l2_fh_open,
+ .release = vb2_fop_release,
+ .read = vb2_fop_read,
+ .poll = vb2_fop_poll,
+ .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */
+ .mmap = vb2_fop_mmap,
+};
+
+static const struct v4l2_ioctl_ops cal_ioctl_ops = {
+ .vidioc_querycap = cal_querycap,
+ .vidioc_enum_fmt_vid_cap = cal_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = cal_g_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = cal_try_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = cal_s_fmt_vid_cap,
+ .vidioc_enum_framesizes = cal_enum_framesizes,
+ .vidioc_reqbufs = vb2_ioctl_reqbufs,
+ .vidioc_create_bufs = vb2_ioctl_create_bufs,
+ .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+ .vidioc_querybuf = vb2_ioctl_querybuf,
+ .vidioc_qbuf = vb2_ioctl_qbuf,
+ .vidioc_dqbuf = vb2_ioctl_dqbuf,
+ .vidioc_enum_input = cal_enum_input,
+ .vidioc_g_input = cal_g_input,
+ .vidioc_s_input = cal_s_input,
+ .vidioc_enum_frameintervals = cal_enum_frameintervals,
+ .vidioc_streamon = vb2_ioctl_streamon,
+ .vidioc_streamoff = vb2_ioctl_streamoff,
+ .vidioc_log_status = v4l2_ctrl_log_status,
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+};
+
+static struct video_device cal_videodev = {
+ .name = CAL_MODULE_NAME,
+ .fops = &cal_fops,
+ .ioctl_ops = &cal_ioctl_ops,
+ .minor = -1,
+ .release = video_device_release_empty,
+};
+
+/* -----------------------------------------------------------------
+ * Initialization and module stuff
+ * ------------------------------------------------------------------
+ */
+static int cal_complete_ctx(struct cal_ctx *ctx);
+
+static int cal_async_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *subdev,
+ struct v4l2_async_subdev *asd)
+{
+ struct cal_ctx *ctx = notifier_to_ctx(notifier);
+ struct v4l2_subdev_mbus_code_enum mbus_code;
+ int ret = 0;
+ int i, j, k;
+
+ if (ctx->sensor) {
+ ctx_info(ctx, "Rejecting subdev %s (Already set!!)",
+ subdev->name);
+ return 0;
+ }
+
+ ctx->sensor = subdev;
+ ctx_dbg(1, ctx, "Using sensor %s for capture\n", subdev->name);
+
+ /* Enumerate sub device formats and enable all matching local formats */
+ ctx->num_active_fmt = 0;
+ for (j = 0, i = 0; ret != -EINVAL; ++j) {
+ struct cal_fmt *fmt;
+
+ memset(&mbus_code, 0, sizeof(mbus_code));
+ mbus_code.index = j;
+ ret = v4l2_subdev_call(subdev, pad, enum_mbus_code,
+ NULL, &mbus_code);
+ if (ret)
+ continue;
+
+ ctx_dbg(2, ctx,
+ "subdev %s: code: %04x idx: %d\n",
+ subdev->name, mbus_code.code, j);
+
+ for (k = 0; k < ARRAY_SIZE(cal_formats); k++) {
+ fmt = &cal_formats[k];
+
+ if (mbus_code.code == fmt->code) {
+ ctx->active_fmt[i] = fmt;
+ ctx_dbg(2, ctx,
+ "matched fourcc: %s: code: %04x idx: %d\n",
+ fourcc_to_str(fmt->fourcc),
+ fmt->code, i);
+ ctx->num_active_fmt = ++i;
+ }
+ }
+ }
+
+ if (i == 0) {
+ ctx_err(ctx, "No suitable format reported by subdev %s\n",
+ subdev->name);
+ return -EINVAL;
+ }
+
+ cal_complete_ctx(ctx);
+
+ return 0;
+}
+
+static int cal_async_complete(struct v4l2_async_notifier *notifier)
+{
+ struct cal_ctx *ctx = notifier_to_ctx(notifier);
+ const struct cal_fmt *fmt;
+ struct v4l2_mbus_framefmt mbus_fmt;
+ int ret;
+
+ ret = __subdev_get_format(ctx, &mbus_fmt);
+ if (ret)
+ return ret;
+
+ fmt = find_format_by_code(ctx, mbus_fmt.code);
+ if (!fmt) {
+ ctx_dbg(3, ctx, "mbus code format (0x%08x) not found.\n",
+ mbus_fmt.code);
+ return -EINVAL;
+ }
+
+ /* Save current subdev format */
+ v4l2_fill_pix_format(&ctx->v_fmt.fmt.pix, &mbus_fmt);
+ ctx->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ ctx->v_fmt.fmt.pix.pixelformat = fmt->fourcc;
+ cal_calc_format_size(ctx, fmt, &ctx->v_fmt);
+ ctx->fmt = fmt;
+ ctx->m_fmt = mbus_fmt;
+
+ return 0;
+}
+
+static int cal_complete_ctx(struct cal_ctx *ctx)
+{
+ struct video_device *vfd;
+ struct vb2_queue *q;
+ int ret;
+
+ ctx->timeperframe = tpf_default;
+ ctx->external_rate = 192000000;
+
+ /* initialize locks */
+ spin_lock_init(&ctx->slock);
+ mutex_init(&ctx->mutex);
+
+ /* initialize queue */
+ q = &ctx->vb_vidq;
+ q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ q->io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
+ q->drv_priv = ctx;
+ q->buf_struct_size = sizeof(struct cal_buffer);
+ q->ops = &cal_video_qops;
+ q->mem_ops = &vb2_dma_contig_memops;
+ q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ q->lock = &ctx->mutex;
+ q->min_buffers_needed = 3;
+
+ ret = vb2_queue_init(q);
+ if (ret)
+ return ret;
+
+ /* init video dma queues */
+ INIT_LIST_HEAD(&ctx->vidq.active);
+
+ vfd = &ctx->vdev;
+ *vfd = cal_videodev;
+ vfd->v4l2_dev = &ctx->v4l2_dev;
+ vfd->queue = q;
+
+ /*
+ * Provide a mutex to v4l2 core. It will be used to protect
+ * all fops and v4l2 ioctls.
+ */
+ vfd->lock = &ctx->mutex;
+ video_set_drvdata(vfd, ctx);
+
+ ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
+ if (ret < 0)
+ return ret;
+
+ v4l2_info(&ctx->v4l2_dev, "V4L2 device registered as %s\n",
+ video_device_node_name(vfd));
+
+ ctx->alloc_ctx = vb2_dma_contig_init_ctx(vfd->v4l2_dev->dev);
+ if (IS_ERR(ctx->alloc_ctx)) {
+ ctx_err(ctx, "Failed to alloc vb2 context\n");
+ ret = PTR_ERR(ctx->alloc_ctx);
+ goto vdev_unreg;
+ }
+
+ return 0;
+
+vdev_unreg:
+ video_unregister_device(vfd);
+ return ret;
+}
+
+static struct device_node *
+of_get_next_port(const struct device_node *parent,
+ struct device_node *prev)
+{
+ struct device_node *port = NULL;
+
+ if (!parent)
+ return NULL;
+
+ if (!prev) {
+ struct device_node *ports;
+ /*
+ * It's the first call, we have to find a port subnode
+ * within this node or within an optional 'ports' node.
+ */
+ ports = of_get_child_by_name(parent, "ports");
+ if (ports)
+ parent = ports;
+
+ port = of_get_child_by_name(parent, "port");
+
+ /* release the 'ports' node */
+ of_node_put(ports);
+ } else {
+ struct device_node *ports;
+
+ ports = of_get_parent(prev);
+ if (!ports)
+ return NULL;
+
+ do {
+ port = of_get_next_child(ports, prev);
+ if (!port) {
+ of_node_put(ports);
+ return NULL;
+ }
+ prev = port;
+ } while (of_node_cmp(port->name, "port") != 0);
+ }
+
+ return port;
+}
+
+static struct device_node *
+of_get_next_endpoint(const struct device_node *parent,
+ struct device_node *prev)
+{
+ struct device_node *ep = NULL;
+
+ if (!parent)
+ return NULL;
+
+ do {
+ ep = of_get_next_child(parent, prev);
+ if (!ep)
+ return NULL;
+ prev = ep;
+ } while (of_node_cmp(ep->name, "endpoint") != 0);
+
+ return ep;
+}
+
+static int of_cal_create_instance(struct cal_ctx *ctx, int inst)
+{
+ struct platform_device *pdev = ctx->dev->pdev;
+ struct device_node *ep_node, *port, *remote_ep,
+ *sensor_node, *parent;
+ struct v4l2_of_endpoint *endpoint;
+ struct v4l2_async_subdev *asd;
+ u32 regval = 0;
+ int ret, index, found_port = 0, lane;
+
+ parent = pdev->dev.of_node;
+
+ asd = &ctx->asd;
+ endpoint = &ctx->endpoint;
+
+ ep_node = NULL;
+ port = NULL;
+ remote_ep = NULL;
+ sensor_node = NULL;
+ ret = -EINVAL;
+
+ ctx_dbg(3, ctx, "Scanning Port node for csi2 port: %d\n", inst);
+ for (index = 0; index < CAL_NUM_CSI2_PORTS; index++) {
+ port = of_get_next_port(parent, port);
+ if (!port) {
+ ctx_dbg(1, ctx, "No port node found for csi2 port:%d\n",
+ index);
+ goto cleanup_exit;
+ }
+
+ /* Match the slice number with <REG> */
+ of_property_read_u32(port, "reg", ®val);
+ ctx_dbg(3, ctx, "port:%d inst:%d <reg>:%d\n",
+ index, inst, regval);
+ if ((regval == inst) && (index == inst)) {
+ found_port = 1;
+ break;
+ }
+ }
+
+ if (!found_port) {
+ ctx_dbg(1, ctx, "No port node matches csi2 port:%d\n",
+ inst);
+ goto cleanup_exit;
+ }
+
+ ctx_dbg(3, ctx, "Scanning sub-device for csi2 port: %d\n",
+ inst);
+
+ ep_node = of_get_next_endpoint(port, ep_node);
+ if (!ep_node) {
+ ctx_dbg(3, ctx, "can't get next endpoint\n");
+ goto cleanup_exit;
+ }
+
+ sensor_node = of_graph_get_remote_port_parent(ep_node);
+ if (!sensor_node) {
+ ctx_dbg(3, ctx, "can't get remote parent\n");
+ goto cleanup_exit;
+ }
+ asd->match_type = V4L2_ASYNC_MATCH_OF;
+ asd->match.of.node = sensor_node;
+
+ remote_ep = of_parse_phandle(ep_node, "remote-endpoint", 0);
+ if (!remote_ep) {
+ ctx_dbg(3, ctx, "can't get remote-endpoint\n");
+ goto cleanup_exit;
+ }
+ v4l2_of_parse_endpoint(remote_ep, endpoint);
+
+ if (endpoint->bus_type != V4L2_MBUS_CSI2) {
+ ctx_err(ctx, "Port:%d sub-device %s is not a CSI2 device\n",
+ inst, sensor_node->name);
+ goto cleanup_exit;
+ }
+
+ /* Store Virtual Channel number */
+ ctx->virtual_channel = endpoint->base.id;
+
+ ctx_dbg(3, ctx, "Port:%d v4l2-endpoint: CSI2\n", inst);
+ ctx_dbg(3, ctx, "Virtual Channel=%d\n", ctx->virtual_channel);
+ ctx_dbg(3, ctx, "flags=0x%08x\n", endpoint->bus.mipi_csi2.flags);
+ ctx_dbg(3, ctx, "clock_lane=%d\n", endpoint->bus.mipi_csi2.clock_lane);
+ ctx_dbg(3, ctx, "num_data_lanes=%d\n",
+ endpoint->bus.mipi_csi2.num_data_lanes);
+ ctx_dbg(3, ctx, "data_lanes= <\n");
+ for (lane = 0; lane < endpoint->bus.mipi_csi2.num_data_lanes; lane++)
+ ctx_dbg(3, ctx, "\t%d\n",
+ endpoint->bus.mipi_csi2.data_lanes[lane]);
+ ctx_dbg(3, ctx, "\t>\n");
+
+ ctx_dbg(1, ctx, "Port: %d found sub-device %s\n",
+ inst, sensor_node->name);
+
+ ctx->asd_list[0] = asd;
+ ctx->notifier.subdevs = ctx->asd_list;
+ ctx->notifier.num_subdevs = 1;
+ ctx->notifier.bound = cal_async_bound;
+ ctx->notifier.complete = cal_async_complete;
+ ret = v4l2_async_notifier_register(&ctx->v4l2_dev,
+ &ctx->notifier);
+ if (ret) {
+ ctx_err(ctx, "Error registering async notifier\n");
+ ret = -EINVAL;
+ }
+
+cleanup_exit:
+ if (!remote_ep)
+ of_node_put(remote_ep);
+ if (!sensor_node)
+ of_node_put(sensor_node);
+ if (!ep_node)
+ of_node_put(ep_node);
+ if (!port)
+ of_node_put(port);
+
+ return ret;
+}
+
+static struct cal_ctx *cal_create_instance(struct cal_dev *dev, int inst)
+{
+ struct cal_ctx *ctx;
+ struct v4l2_ctrl_handler *hdl;
+ int ret;
+
+ ctx = devm_kzalloc(&dev->pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return 0;
+
+ /* save the cal_dev * for future ref */
+ ctx->dev = dev;
+
+ snprintf(ctx->v4l2_dev.name, sizeof(ctx->v4l2_dev.name),
+ "%s-%03d", CAL_MODULE_NAME, inst);
+ ret = v4l2_device_register(&dev->pdev->dev, &ctx->v4l2_dev);
+ if (ret)
+ goto err_exit;
+
+ hdl = &ctx->ctrl_handler;
+ ret = v4l2_ctrl_handler_init(hdl, 11);
+ if (ret) {
+ ctx_err(ctx, "Failed to init ctrl handler\n");
+ goto unreg_dev;
+ }
+ ctx->v4l2_dev.ctrl_handler = hdl;
+
+ /* Make sure Camera Core H/W register area is available */
+ ctx->cc = dev->cc[inst];
+
+ /* Store the instance id */
+ ctx->csi2_port = inst + 1;
+
+ ret = of_cal_create_instance(ctx, inst);
+ if (ret) {
+ ret = -EINVAL;
+ goto free_hdl;
+ }
+ return ctx;
+
+free_hdl:
+ v4l2_ctrl_handler_free(hdl);
+unreg_dev:
+ v4l2_device_unregister(&ctx->v4l2_dev);
+err_exit:
+ return 0;
+}
+
+static int cal_probe(struct platform_device *pdev)
+{
+ struct cal_dev *dev;
+ int ret;
+ int irq;
+
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ /* set pseudo v4l2 device name so we can use v4l2_printk */
+ strlcpy(dev->v4l2_dev.name, CAL_MODULE_NAME,
+ sizeof(dev->v4l2_dev.name));
+
+ /* save pdev pointer */
+ dev->pdev = pdev;
+
+ dev->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "cal_top");
+ dev->base = devm_ioremap_resource(&pdev->dev, dev->res);
+ if (IS_ERR(dev->base))
+ return PTR_ERR(dev->base);
+
+ cal_dbg(1, dev, "ioresource %s at %pa - %pa\n",
+ dev->res->name, &dev->res->start, &dev->res->end);
+
+ irq = platform_get_irq(pdev, 0);
+ cal_dbg(1, dev, "got irq# %d\n", irq);
+ ret = devm_request_irq(&pdev->dev, irq, cal_irq, 0, CAL_MODULE_NAME,
+ dev);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, dev);
+
+ dev->cm = cm_create(dev);
+ if (IS_ERR(dev->cm))
+ return PTR_ERR(dev->cm);
+
+ dev->cc[0] = cc_create(dev, 0);
+ if (IS_ERR(dev->cc[0]))
+ return PTR_ERR(dev->cc[0]);
+
+ dev->cc[1] = cc_create(dev, 1);
+ if (IS_ERR(dev->cc[1]))
+ return PTR_ERR(dev->cc[1]);
+
+ dev->ctx[0] = NULL;
+ dev->ctx[1] = NULL;
+
+ dev->ctx[0] = cal_create_instance(dev, 0);
+ dev->ctx[1] = cal_create_instance(dev, 1);
+ if (!dev->ctx[0] && !dev->ctx[1]) {
+ cal_err(dev, "Neither port is configured, no point in staying up\n");
+ return -ENODEV;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
+ ret = cal_runtime_get(dev);
+ if (ret)
+ goto runtime_disable;
+
+ /* Just check we can actually access the module */
+ cal_get_hwinfo(dev);
+
+ cal_runtime_put(dev);
+
+ return 0;
+
+runtime_disable:
+ pm_runtime_disable(&pdev->dev);
+ return ret;
+}
+
+static int cal_remove(struct platform_device *pdev)
+{
+ struct cal_dev *dev =
+ (struct cal_dev *)platform_get_drvdata(pdev);
+ struct cal_ctx *ctx;
+ int i;
+
+ cal_dbg(1, dev, "Removing %s\n", CAL_MODULE_NAME);
+
+ cal_runtime_get(dev);
+
+ for (i = 0; i < CAL_NUM_CONTEXT; i++) {
+ ctx = dev->ctx[i];
+ if (ctx) {
+ ctx_dbg(1, ctx, "unregistering %s\n",
+ video_device_node_name(&ctx->vdev));
+ camerarx_phy_disable(ctx);
+ v4l2_async_notifier_unregister(&ctx->notifier);
+ vb2_dma_contig_cleanup_ctx(ctx->alloc_ctx);
+ v4l2_ctrl_handler_free(&ctx->ctrl_handler);
+ v4l2_device_unregister(&ctx->v4l2_dev);
+ video_unregister_device(&ctx->vdev);
+ }
+ }
+
+ cal_runtime_put(dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id cal_of_match[] = {
+ { .compatible = "ti,dra72-cal", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cal_of_match);
+#endif
+
+static struct platform_driver cal_pdrv = {
+ .probe = cal_probe,
+ .remove = cal_remove,
+ .driver = {
+ .name = CAL_MODULE_NAME,
+ .of_match_table = of_match_ptr(cal_of_match),
+ },
+};
+
+module_platform_driver(cal_pdrv);
--- /dev/null
+/*
+ * TI CAL camera interface driver
+ *
+ * Copyright (c) 2015 Texas Instruments Inc.
+ *
+ * Benoit Parrot, <bparrot@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __TI_CAL_REGS_H
+#define __TI_CAL_REGS_H
+
+#define CAL_NUM_CSI2_PORTS 2
+
+/* CAL register offsets */
+
+#define CAL_HL_REVISION 0x0000
+#define CAL_HL_HWINFO 0x0004
+#define CAL_HL_SYSCONFIG 0x0010
+#define CAL_HL_IRQ_EOI 0x001c
+#define CAL_HL_IRQSTATUS_RAW(m) (0x20U + ((m-1) * 0x10U))
+#define CAL_HL_IRQSTATUS(m) (0x24U + ((m-1) * 0x10U))
+#define CAL_HL_IRQENABLE_SET(m) (0x28U + ((m-1) * 0x10U))
+#define CAL_HL_IRQENABLE_CLR(m) (0x2cU + ((m-1) * 0x10U))
+#define CAL_PIX_PROC(m) (0xc0U + ((m-1) * 0x4U))
+#define CAL_CTRL 0x100
+#define CAL_CTRL1 0x104
+#define CAL_LINE_NUMBER_EVT 0x108
+#define CAL_VPORT_CTRL1 0x120
+#define CAL_VPORT_CTRL2 0x124
+#define CAL_BYS_CTRL1 0x130
+#define CAL_BYS_CTRL2 0x134
+#define CAL_RD_DMA_CTRL 0x140
+#define CAL_RD_DMA_PIX_ADDR 0x144
+#define CAL_RD_DMA_PIX_OFST 0x148
+#define CAL_RD_DMA_XSIZE 0x14c
+#define CAL_RD_DMA_YSIZE 0x150
+#define CAL_RD_DMA_INIT_ADDR 0x154
+#define CAL_RD_DMA_INIT_OFST 0x168
+#define CAL_RD_DMA_CTRL2 0x16c
+#define CAL_WR_DMA_CTRL(m) (0x200U + ((m-1) * 0x10U))
+#define CAL_WR_DMA_ADDR(m) (0x204U + ((m-1) * 0x10U))
+#define CAL_WR_DMA_OFST(m) (0x208U + ((m-1) * 0x10U))
+#define CAL_WR_DMA_XSIZE(m) (0x20cU + ((m-1) * 0x10U))
+#define CAL_CSI2_PPI_CTRL(m) (0x300U + ((m-1) * 0x80U))
+#define CAL_CSI2_COMPLEXIO_CFG(m) (0x304U + ((m-1) * 0x80U))
+#define CAL_CSI2_COMPLEXIO_IRQSTATUS(m) (0x308U + ((m-1) * 0x80U))
+#define CAL_CSI2_SHORT_PACKET(m) (0x30cU + ((m-1) * 0x80U))
+#define CAL_CSI2_COMPLEXIO_IRQENABLE(m) (0x310U + ((m-1) * 0x80U))
+#define CAL_CSI2_TIMING(m) (0x314U + ((m-1) * 0x80U))
+#define CAL_CSI2_VC_IRQENABLE(m) (0x318U + ((m-1) * 0x80U))
+#define CAL_CSI2_VC_IRQSTATUS(m) (0x328U + ((m-1) * 0x80U))
+#define CAL_CSI2_CTX0(m) (0x330U + ((m-1) * 0x80U))
+#define CAL_CSI2_CTX1(m) (0x334U + ((m-1) * 0x80U))
+#define CAL_CSI2_CTX2(m) (0x338U + ((m-1) * 0x80U))
+#define CAL_CSI2_CTX3(m) (0x33cU + ((m-1) * 0x80U))
+#define CAL_CSI2_CTX4(m) (0x340U + ((m-1) * 0x80U))
+#define CAL_CSI2_CTX5(m) (0x344U + ((m-1) * 0x80U))
+#define CAL_CSI2_CTX6(m) (0x348U + ((m-1) * 0x80U))
+#define CAL_CSI2_CTX7(m) (0x34cU + ((m-1) * 0x80U))
+#define CAL_CSI2_STATUS0(m) (0x350U + ((m-1) * 0x80U))
+#define CAL_CSI2_STATUS1(m) (0x354U + ((m-1) * 0x80U))
+#define CAL_CSI2_STATUS2(m) (0x358U + ((m-1) * 0x80U))
+#define CAL_CSI2_STATUS3(m) (0x35cU + ((m-1) * 0x80U))
+#define CAL_CSI2_STATUS4(m) (0x360U + ((m-1) * 0x80U))
+#define CAL_CSI2_STATUS5(m) (0x364U + ((m-1) * 0x80U))
+#define CAL_CSI2_STATUS6(m) (0x368U + ((m-1) * 0x80U))
+#define CAL_CSI2_STATUS7(m) (0x36cU + ((m-1) * 0x80U))
+
+/* CAL CSI2 PHY register offsets */
+#define CAL_CSI2_PHY_REG0 0x000
+#define CAL_CSI2_PHY_REG1 0x004
+#define CAL_CSI2_PHY_REG2 0x008
+
+/* CAL Control Module Core Camerrx Control register offsets */
+#define CM_CTRL_CORE_CAMERRX_CONTROL 0x000
+
+/*********************************************************************
+* Generic value used in various field below
+*********************************************************************/
+
+#define CAL_GEN_DISABLE 0
+#define CAL_GEN_ENABLE 1
+#define CAL_GEN_FALSE 0
+#define CAL_GEN_TRUE 1
+
+/*********************************************************************
+* Field Definition Macros
+*********************************************************************/
+
+#define CAL_HL_REVISION_MINOR_MASK GENMASK(5, 0)
+#define CAL_HL_REVISION_CUSTOM_MASK GENMASK(7, 6)
+#define CAL_HL_REVISION_MAJOR_MASK GENMASK(10, 8)
+#define CAL_HL_REVISION_RTL_MASK GENMASK(15, 11)
+#define CAL_HL_REVISION_FUNC_MASK GENMASK(27, 16)
+#define CAL_HL_REVISION_SCHEME_MASK GENMASK(31, 30)
+#define CAL_HL_REVISION_SCHEME_H08 1
+#define CAL_HL_REVISION_SCHEME_LEGACY 0
+
+#define CAL_HL_HWINFO_WFIFO_MASK GENMASK(3, 0)
+#define CAL_HL_HWINFO_RFIFO_MASK GENMASK(7, 4)
+#define CAL_HL_HWINFO_PCTX_MASK GENMASK(12, 8)
+#define CAL_HL_HWINFO_WCTX_MASK GENMASK(18, 13)
+#define CAL_HL_HWINFO_VFIFO_MASK GENMASK(22, 19)
+#define CAL_HL_HWINFO_NCPORT_MASK GENMASK(27, 23)
+#define CAL_HL_HWINFO_NPPI_CTXS0_MASK GENMASK(29, 28)
+#define CAL_HL_HWINFO_NPPI_CTXS1_MASK GENMASK(31, 30)
+#define CAL_HL_HWINFO_NPPI_CONTEXTS_ZERO 0
+#define CAL_HL_HWINFO_NPPI_CONTEXTS_FOUR 1
+#define CAL_HL_HWINFO_NPPI_CONTEXTS_EIGHT 2
+#define CAL_HL_HWINFO_NPPI_CONTEXTS_RESERVED 3
+
+#define CAL_HL_SYSCONFIG_SOFTRESET_MASK BIT_MASK(0)
+#define CAL_HL_SYSCONFIG_SOFTRESET_DONE 0x0
+#define CAL_HL_SYSCONFIG_SOFTRESET_PENDING 0x1
+#define CAL_HL_SYSCONFIG_SOFTRESET_NOACTION 0x0
+#define CAL_HL_SYSCONFIG_SOFTRESET_RESET 0x1
+#define CAL_HL_SYSCONFIG_IDLE_MASK GENMASK(3, 2)
+#define CAL_HL_SYSCONFIG_IDLEMODE_FORCE 0
+#define CAL_HL_SYSCONFIG_IDLEMODE_NO 1
+#define CAL_HL_SYSCONFIG_IDLEMODE_SMART1 2
+#define CAL_HL_SYSCONFIG_IDLEMODE_SMART2 3
+
+#define CAL_HL_IRQ_EOI_LINE_NUMBER_MASK BIT_MASK(0)
+#define CAL_HL_IRQ_EOI_LINE_NUMBER_READ0 0
+#define CAL_HL_IRQ_EOI_LINE_NUMBER_EOI0 0
+
+#define CAL_HL_IRQ_MASK(m) BIT_MASK(m-1)
+#define CAL_HL_IRQ_NOACTION 0x0
+#define CAL_HL_IRQ_ENABLE 0x1
+#define CAL_HL_IRQ_CLEAR 0x1
+#define CAL_HL_IRQ_DISABLED 0x0
+#define CAL_HL_IRQ_ENABLED 0x1
+#define CAL_HL_IRQ_PENDING 0x1
+
+#define CAL_PIX_PROC_EN_MASK BIT_MASK(0)
+#define CAL_PIX_PROC_EXTRACT_MASK GENMASK(4, 1)
+#define CAL_PIX_PROC_EXTRACT_B6 0x0
+#define CAL_PIX_PROC_EXTRACT_B7 0x1
+#define CAL_PIX_PROC_EXTRACT_B8 0x2
+#define CAL_PIX_PROC_EXTRACT_B10 0x3
+#define CAL_PIX_PROC_EXTRACT_B10_MIPI 0x4
+#define CAL_PIX_PROC_EXTRACT_B12 0x5
+#define CAL_PIX_PROC_EXTRACT_B12_MIPI 0x6
+#define CAL_PIX_PROC_EXTRACT_B14 0x7
+#define CAL_PIX_PROC_EXTRACT_B14_MIPI 0x8
+#define CAL_PIX_PROC_EXTRACT_B16_BE 0x9
+#define CAL_PIX_PROC_EXTRACT_B16_LE 0xa
+#define CAL_PIX_PROC_DPCMD_MASK GENMASK(9, 5)
+#define CAL_PIX_PROC_DPCMD_BYPASS 0x0
+#define CAL_PIX_PROC_DPCMD_DPCM_10_8_1 0x2
+#define CAL_PIX_PROC_DPCMD_DPCM_12_8_1 0x8
+#define CAL_PIX_PROC_DPCMD_DPCM_10_7_1 0x4
+#define CAL_PIX_PROC_DPCMD_DPCM_10_7_2 0x5
+#define CAL_PIX_PROC_DPCMD_DPCM_10_6_1 0x6
+#define CAL_PIX_PROC_DPCMD_DPCM_10_6_2 0x7
+#define CAL_PIX_PROC_DPCMD_DPCM_12_7_1 0xa
+#define CAL_PIX_PROC_DPCMD_DPCM_12_6_1 0xc
+#define CAL_PIX_PROC_DPCMD_DPCM_14_10 0xe
+#define CAL_PIX_PROC_DPCMD_DPCM_14_8_1 0x10
+#define CAL_PIX_PROC_DPCMD_DPCM_16_12_1 0x12
+#define CAL_PIX_PROC_DPCMD_DPCM_16_10_1 0x14
+#define CAL_PIX_PROC_DPCMD_DPCM_16_8_1 0x16
+#define CAL_PIX_PROC_DPCME_MASK GENMASK(15, 11)
+#define CAL_PIX_PROC_DPCME_BYPASS 0x0
+#define CAL_PIX_PROC_DPCME_DPCM_10_8_1 0x2
+#define CAL_PIX_PROC_DPCME_DPCM_12_8_1 0x8
+#define CAL_PIX_PROC_DPCME_DPCM_14_10 0xe
+#define CAL_PIX_PROC_DPCME_DPCM_14_8_1 0x10
+#define CAL_PIX_PROC_DPCME_DPCM_16_12_1 0x12
+#define CAL_PIX_PROC_DPCME_DPCM_16_10_1 0x14
+#define CAL_PIX_PROC_DPCME_DPCM_16_8_1 0x16
+#define CAL_PIX_PROC_PACK_MASK GENMASK(18, 16)
+#define CAL_PIX_PROC_PACK_B8 0x0
+#define CAL_PIX_PROC_PACK_B10_MIPI 0x2
+#define CAL_PIX_PROC_PACK_B12 0x3
+#define CAL_PIX_PROC_PACK_B12_MIPI 0x4
+#define CAL_PIX_PROC_PACK_B16 0x5
+#define CAL_PIX_PROC_PACK_ARGB 0x6
+#define CAL_PIX_PROC_CPORT_MASK GENMASK(23, 19)
+
+#define CAL_CTRL_POSTED_WRITES_MASK BIT_MASK(0)
+#define CAL_CTRL_POSTED_WRITES_NONPOSTED 0
+#define CAL_CTRL_POSTED_WRITES 1
+#define CAL_CTRL_TAGCNT_MASK GENMASK(4, 1)
+#define CAL_CTRL_BURSTSIZE_MASK GENMASK(6, 5)
+#define CAL_CTRL_BURSTSIZE_BURST16 0x0
+#define CAL_CTRL_BURSTSIZE_BURST32 0x1
+#define CAL_CTRL_BURSTSIZE_BURST64 0x2
+#define CAL_CTRL_BURSTSIZE_BURST128 0x3
+#define CAL_CTRL_LL_FORCE_STATE_MASK GENMASK(12, 7)
+#define CAL_CTRL_MFLAGL_MASK GENMASK(20, 13)
+#define CAL_CTRL_PWRSCPCLK_MASK BIT_MASK(21)
+#define CAL_CTRL_PWRSCPCLK_AUTO 0
+#define CAL_CTRL_PWRSCPCLK_FORCE 1
+#define CAL_CTRL_RD_DMA_STALL_MASK BIT_MASK(22)
+#define CAL_CTRL_MFLAGH_MASK GENMASK(31, 24)
+
+#define CAL_CTRL1_PPI_GROUPING_MASK GENMASK(1, 0)
+#define CAL_CTRL1_PPI_GROUPING_DISABLED 0
+#define CAL_CTRL1_PPI_GROUPING_RESERVED 1
+#define CAL_CTRL1_PPI_GROUPING_0 2
+#define CAL_CTRL1_PPI_GROUPING_1 3
+#define CAL_CTRL1_INTERLEAVE01_MASK GENMASK(3, 2)
+#define CAL_CTRL1_INTERLEAVE01_DISABLED 0
+#define CAL_CTRL1_INTERLEAVE01_PIX1 1
+#define CAL_CTRL1_INTERLEAVE01_PIX4 2
+#define CAL_CTRL1_INTERLEAVE01_RESERVED 3
+#define CAL_CTRL1_INTERLEAVE23_MASK GENMASK(5, 4)
+#define CAL_CTRL1_INTERLEAVE23_DISABLED 0
+#define CAL_CTRL1_INTERLEAVE23_PIX1 1
+#define CAL_CTRL1_INTERLEAVE23_PIX4 2
+#define CAL_CTRL1_INTERLEAVE23_RESERVED 3
+
+#define CAL_LINE_NUMBER_EVT_CPORT_MASK GENMASK(4, 0)
+#define CAL_LINE_NUMBER_EVT_MASK GENMASK(29, 16)
+
+#define CAL_VPORT_CTRL1_PCLK_MASK GENMASK(16, 0)
+#define CAL_VPORT_CTRL1_XBLK_MASK GENMASK(24, 17)
+#define CAL_VPORT_CTRL1_YBLK_MASK GENMASK(30, 25)
+#define CAL_VPORT_CTRL1_WIDTH_MASK BIT_MASK(31)
+#define CAL_VPORT_CTRL1_WIDTH_ONE 0
+#define CAL_VPORT_CTRL1_WIDTH_TWO 1
+
+#define CAL_VPORT_CTRL2_CPORT_MASK GENMASK(4, 0)
+#define CAL_VPORT_CTRL2_FREERUNNING_MASK BIT_MASK(15)
+#define CAL_VPORT_CTRL2_FREERUNNING_GATED 0
+#define CAL_VPORT_CTRL2_FREERUNNING_FREE 1
+#define CAL_VPORT_CTRL2_FS_RESETS_MASK BIT_MASK(16)
+#define CAL_VPORT_CTRL2_FS_RESETS_NO 0
+#define CAL_VPORT_CTRL2_FS_RESETS_YES 1
+#define CAL_VPORT_CTRL2_FSM_RESET_MASK BIT_MASK(17)
+#define CAL_VPORT_CTRL2_FSM_RESET_NOEFFECT 0
+#define CAL_VPORT_CTRL2_FSM_RESET 1
+#define CAL_VPORT_CTRL2_RDY_THR_MASK GENMASK(31, 18)
+
+#define CAL_BYS_CTRL1_PCLK_MASK GENMASK(16, 0)
+#define CAL_BYS_CTRL1_XBLK_MASK GENMASK(24, 17)
+#define CAL_BYS_CTRL1_YBLK_MASK GENMASK(30, 25)
+#define CAL_BYS_CTRL1_BYSINEN_MASK BIT_MASK(31)
+
+#define CAL_BYS_CTRL2_CPORTIN_MASK GENMASK(4, 0)
+#define CAL_BYS_CTRL2_CPORTOUT_MASK GENMASK(9, 5)
+#define CAL_BYS_CTRL2_DUPLICATEDDATA_MASK BIT_MASK(10)
+#define CAL_BYS_CTRL2_DUPLICATEDDATA_NO 0
+#define CAL_BYS_CTRL2_DUPLICATEDDATA_YES 1
+#define CAL_BYS_CTRL2_FREERUNNING_MASK BIT_MASK(11)
+#define CAL_BYS_CTRL2_FREERUNNING_NO 0
+#define CAL_BYS_CTRL2_FREERUNNING_YES 1
+
+#define CAL_RD_DMA_CTRL_GO_MASK BIT_MASK(0)
+#define CAL_RD_DMA_CTRL_GO_DIS 0
+#define CAL_RD_DMA_CTRL_GO_EN 1
+#define CAL_RD_DMA_CTRL_GO_IDLE 0
+#define CAL_RD_DMA_CTRL_GO_BUSY 1
+#define CAL_RD_DMA_CTRL_INIT_MASK BIT_MASK(1)
+#define CAL_RD_DMA_CTRL_BW_LIMITER_MASK GENMASK(10, 2)
+#define CAL_RD_DMA_CTRL_OCP_TAG_CNT_MASK GENMASK(14, 11)
+#define CAL_RD_DMA_CTRL_PCLK_MASK GENMASK(31, 15)
+
+#define CAL_RD_DMA_PIX_ADDR_MASK GENMASK(31, 3)
+
+#define CAL_RD_DMA_PIX_OFST_MASK GENMASK(31, 4)
+
+#define CAL_RD_DMA_XSIZE_MASK GENMASK(31, 19)
+
+#define CAL_RD_DMA_YSIZE_MASK GENMASK(29, 16)
+
+#define CAL_RD_DMA_INIT_ADDR_MASK GENMASK(31, 3)
+
+#define CAL_RD_DMA_INIT_OFST_MASK GENMASK(31, 3)
+
+#define CAL_RD_DMA_CTRL2_CIRC_MODE_MASK GENMASK(2, 0)
+#define CAL_RD_DMA_CTRL2_CIRC_MODE_DIS 0
+#define CAL_RD_DMA_CTRL2_CIRC_MODE_ONE 1
+#define CAL_RD_DMA_CTRL2_CIRC_MODE_FOUR 2
+#define CAL_RD_DMA_CTRL2_CIRC_MODE_SIXTEEN 3
+#define CAL_RD_DMA_CTRL2_CIRC_MODE_SIXTYFOUR 4
+#define CAL_RD_DMA_CTRL2_CIRC_MODE_RESERVED 5
+#define CAL_RD_DMA_CTRL2_ICM_CSTART_MASK BIT_MASK(3)
+#define CAL_RD_DMA_CTRL2_PATTERN_MASK GENMASK(5, 4)
+#define CAL_RD_DMA_CTRL2_PATTERN_LINEAR 0
+#define CAL_RD_DMA_CTRL2_PATTERN_YUV420 1
+#define CAL_RD_DMA_CTRL2_PATTERN_RD2SKIP2 2
+#define CAL_RD_DMA_CTRL2_PATTERN_RD2SKIP4 3
+#define CAL_RD_DMA_CTRL2_BYSOUT_LE_WAIT_MASK BIT_MASK(6)
+#define CAL_RD_DMA_CTRL2_BYSOUT_LE_WAIT_FREERUNNING 0
+#define CAL_RD_DMA_CTRL2_BYSOUT_LE_WAIT_WAITFORBYSOUT 1
+#define CAL_RD_DMA_CTRL2_CIRC_SIZE_MASK GENMASK(29, 16)
+
+#define CAL_WR_DMA_CTRL_MODE_MASK GENMASK(2, 0)
+#define CAL_WR_DMA_CTRL_MODE_DIS 0
+#define CAL_WR_DMA_CTRL_MODE_SHD 1
+#define CAL_WR_DMA_CTRL_MODE_CNT 2
+#define CAL_WR_DMA_CTRL_MODE_CNT_INIT 3
+#define CAL_WR_DMA_CTRL_MODE_CONST 4
+#define CAL_WR_DMA_CTRL_MODE_RESERVED 5
+#define CAL_WR_DMA_CTRL_PATTERN_MASK GENMASK(4, 3)
+#define CAL_WR_DMA_CTRL_PATTERN_LINEAR 0
+#define CAL_WR_DMA_CTRL_PATTERN_WR2SKIP2 2
+#define CAL_WR_DMA_CTRL_PATTERN_WR2SKIP4 3
+#define CAL_WR_DMA_CTRL_PATTERN_RESERVED 1
+#define CAL_WR_DMA_CTRL_ICM_PSTART_MASK BIT_MASK(5)
+#define CAL_WR_DMA_CTRL_DTAG_MASK GENMASK(8, 6)
+#define CAL_WR_DMA_CTRL_DTAG_ATT_HDR 0
+#define CAL_WR_DMA_CTRL_DTAG_ATT_DAT 1
+#define CAL_WR_DMA_CTRL_DTAG 2
+#define CAL_WR_DMA_CTRL_DTAG_PIX_HDR 3
+#define CAL_WR_DMA_CTRL_DTAG_PIX_DAT 4
+#define CAL_WR_DMA_CTRL_DTAG_D5 5
+#define CAL_WR_DMA_CTRL_DTAG_D6 6
+#define CAL_WR_DMA_CTRL_DTAG_D7 7
+#define CAL_WR_DMA_CTRL_CPORT_MASK GENMASK(13, 9)
+#define CAL_WR_DMA_CTRL_STALL_RD_MASK BIT_MASK(14)
+#define CAL_WR_DMA_CTRL_YSIZE_MASK GENMASK(31, 18)
+
+#define CAL_WR_DMA_ADDR_MASK GENMASK(31, 4)
+
+#define CAL_WR_DMA_OFST_MASK GENMASK(18, 4)
+#define CAL_WR_DMA_OFST_CIRC_MODE_MASK GENMASK(23, 22)
+#define CAL_WR_DMA_OFST_CIRC_MODE_ONE 1
+#define CAL_WR_DMA_OFST_CIRC_MODE_FOUR 2
+#define CAL_WR_DMA_OFST_CIRC_MODE_SIXTYFOUR 3
+#define CAL_WR_DMA_OFST_CIRC_MODE_DISABLED 0
+#define CAL_WR_DMA_OFST_CIRC_SIZE_MASK GENMASK(31, 24)
+
+#define CAL_WR_DMA_XSIZE_XSKIP_MASK GENMASK(15, 3)
+#define CAL_WR_DMA_XSIZE_MASK GENMASK(31, 19)
+
+#define CAL_CSI2_PPI_CTRL_IF_EN_MASK BIT_MASK(0)
+#define CAL_CSI2_PPI_CTRL_ECC_EN_MASK BIT_MASK(2)
+#define CAL_CSI2_PPI_CTRL_FRAME_MASK BIT_MASK(3)
+#define CAL_CSI2_PPI_CTRL_FRAME_IMMEDIATE 0
+#define CAL_CSI2_PPI_CTRL_FRAME 1
+
+#define CAL_CSI2_COMPLEXIO_CFG_CLOCK_POSITION_MASK GENMASK(2, 0)
+#define CAL_CSI2_COMPLEXIO_CFG_POSITION_5 5
+#define CAL_CSI2_COMPLEXIO_CFG_POSITION_4 4
+#define CAL_CSI2_COMPLEXIO_CFG_POSITION_3 3
+#define CAL_CSI2_COMPLEXIO_CFG_POSITION_2 2
+#define CAL_CSI2_COMPLEXIO_CFG_POSITION_1 1
+#define CAL_CSI2_COMPLEXIO_CFG_POSITION_NOT_USED 0
+#define CAL_CSI2_COMPLEXIO_CFG_CLOCK_POL_MASK BIT_MASK(3)
+#define CAL_CSI2_COMPLEXIO_CFG_POL_PLUSMINUS 0
+#define CAL_CSI2_COMPLEXIO_CFG_POL_MINUSPLUS 1
+#define CAL_CSI2_COMPLEXIO_CFG_DATA1_POSITION_MASK GENMASK(6, 4)
+#define CAL_CSI2_COMPLEXIO_CFG_DATA1_POL_MASK BIT_MASK(7)
+#define CAL_CSI2_COMPLEXIO_CFG_DATA2_POSITION_MASK GENMASK(10, 8)
+#define CAL_CSI2_COMPLEXIO_CFG_DATA2_POL_MASK BIT_MASK(11)
+#define CAL_CSI2_COMPLEXIO_CFG_DATA3_POSITION_MASK GENMASK(14, 12)
+#define CAL_CSI2_COMPLEXIO_CFG_DATA3_POL_MASK BIT_MASK(15)
+#define CAL_CSI2_COMPLEXIO_CFG_DATA4_POSITION_MASK GENMASK(18, 16)
+#define CAL_CSI2_COMPLEXIO_CFG_DATA4_POL_MASK BIT_MASK(19)
+#define CAL_CSI2_COMPLEXIO_CFG_PWR_AUTO_MASK BIT_MASK(24)
+#define CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_MASK GENMASK(26, 25)
+#define CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_OFF 0
+#define CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_ON 1
+#define CAL_CSI2_COMPLEXIO_CFG_PWR_STATUS_STATE_ULP 2
+#define CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_MASK GENMASK(28, 27)
+#define CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_OFF 0
+#define CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ON 1
+#define CAL_CSI2_COMPLEXIO_CFG_PWR_CMD_STATE_ULP 2
+#define CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK BIT_MASK(29)
+#define CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETCOMPLETED 1
+#define CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETONGOING 0
+#define CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK BIT_MASK(30)
+#define CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL 0
+#define CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_OPERATIONAL 1
+
+#define CAL_CSI2_SHORT_PACKET_MASK GENMASK(23, 0)
+
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTHS1_MASK BIT_MASK(0)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTHS2_MASK BIT_MASK(1)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTHS3_MASK BIT_MASK(2)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTHS4_MASK BIT_MASK(3)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTHS5_MASK BIT_MASK(4)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS1_MASK BIT_MASK(5)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS2_MASK BIT_MASK(6)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS3_MASK BIT_MASK(7)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS4_MASK BIT_MASK(8)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRSOTSYNCHS5_MASK BIT_MASK(9)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRESC1_MASK BIT_MASK(10)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRESC2_MASK BIT_MASK(11)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRESC3_MASK BIT_MASK(12)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRESC4_MASK BIT_MASK(13)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRESC5_MASK BIT_MASK(14)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRCONTROL1_MASK BIT_MASK(15)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRCONTROL2_MASK BIT_MASK(16)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRCONTROL3_MASK BIT_MASK(17)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRCONTROL4_MASK BIT_MASK(18)
+#define CAL_CSI2_COMPLEXIO_IRQ_ERRCONTROL5_MASK BIT_MASK(19)
+#define CAL_CSI2_COMPLEXIO_IRQ_STATEULPM1_MASK BIT_MASK(20)
+#define CAL_CSI2_COMPLEXIO_IRQ_STATEULPM2_MASK BIT_MASK(21)
+#define CAL_CSI2_COMPLEXIO_IRQ_STATEULPM3_MASK BIT_MASK(22)
+#define CAL_CSI2_COMPLEXIO_IRQ_STATEULPM4_MASK BIT_MASK(23)
+#define CAL_CSI2_COMPLEXIO_IRQ_STATEULPM5_MASK BIT_MASK(24)
+#define CAL_CSI2_COMPLEXIO_IRQ_STATEALLULPMENTER_MASK BIT_MASK(25)
+#define CAL_CSI2_COMPLEXIO_IRQ_STATEALLULPMEXIT_MASK BIT_MASK(26)
+#define CAL_CSI2_COMPLEXIO_IRQ_FIFO_OVR_MASK BIT_MASK(27)
+#define CAL_CSI2_COMPLEXIO_IRQ_SHORT_PACKET_MASK BIT_MASK(28)
+#define CAL_CSI2_COMPLEXIO_IRQ_ECC_NO_CORRECTION_MASK BIT_MASK(30)
+
+#define CAL_CSI2_TIMING_STOP_STATE_COUNTER_IO1_MASK GENMASK(12, 0)
+#define CAL_CSI2_TIMING_STOP_STATE_X4_IO1_MASK BIT_MASK(13)
+#define CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK BIT_MASK(14)
+#define CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK BIT_MASK(15)
+
+#define CAL_CSI2_VC_IRQ_FS_IRQ_0_MASK BIT_MASK(0)
+#define CAL_CSI2_VC_IRQ_FE_IRQ_0_MASK BIT_MASK(1)
+#define CAL_CSI2_VC_IRQ_LS_IRQ_0_MASK BIT_MASK(2)
+#define CAL_CSI2_VC_IRQ_LE_IRQ_0_MASK BIT_MASK(3)
+#define CAL_CSI2_VC_IRQ_CS_IRQ_0_MASK BIT_MASK(4)
+#define CAL_CSI2_VC_IRQ_ECC_CORRECTION0_IRQ_0_MASK BIT_MASK(5)
+#define CAL_CSI2_VC_IRQ_FS_IRQ_1_MASK BIT_MASK(8)
+#define CAL_CSI2_VC_IRQ_FE_IRQ_1_MASK BIT_MASK(9)
+#define CAL_CSI2_VC_IRQ_LS_IRQ_1_MASK BIT_MASK(10)
+#define CAL_CSI2_VC_IRQ_LE_IRQ_1_MASK BIT_MASK(11)
+#define CAL_CSI2_VC_IRQ_CS_IRQ_1_MASK BIT_MASK(12)
+#define CAL_CSI2_VC_IRQ_ECC_CORRECTION0_IRQ_1_MASK BIT_MASK(13)
+#define CAL_CSI2_VC_IRQ_FS_IRQ_2_MASK BIT_MASK(16)
+#define CAL_CSI2_VC_IRQ_FE_IRQ_2_MASK BIT_MASK(17)
+#define CAL_CSI2_VC_IRQ_LS_IRQ_2_MASK BIT_MASK(18)
+#define CAL_CSI2_VC_IRQ_LE_IRQ_2_MASK BIT_MASK(19)
+#define CAL_CSI2_VC_IRQ_CS_IRQ_2_MASK BIT_MASK(20)
+#define CAL_CSI2_VC_IRQ_ECC_CORRECTION0_IRQ_2_MASK BIT_MASK(21)
+#define CAL_CSI2_VC_IRQ_FS_IRQ_3_MASK BIT_MASK(24)
+#define CAL_CSI2_VC_IRQ_FE_IRQ_3_MASK BIT_MASK(25)
+#define CAL_CSI2_VC_IRQ_LS_IRQ_3_MASK BIT_MASK(26)
+#define CAL_CSI2_VC_IRQ_LE_IRQ_3_MASK BIT_MASK(27)
+#define CAL_CSI2_VC_IRQ_CS_IRQ_3_MASK BIT_MASK(28)
+#define CAL_CSI2_VC_IRQ_ECC_CORRECTION0_IRQ_3_MASK BIT_MASK(29)
+
+#define CAL_CSI2_CTX_DT_MASK GENMASK(5, 0)
+#define CAL_CSI2_CTX_VC_MASK GENMASK(7, 6)
+#define CAL_CSI2_CTX_CPORT_MASK GENMASK(12, 8)
+#define CAL_CSI2_CTX_ATT_MASK BIT_MASK(13)
+#define CAL_CSI2_CTX_ATT_PIX 0
+#define CAL_CSI2_CTX_ATT 1
+#define CAL_CSI2_CTX_PACK_MODE_MASK BIT_MASK(14)
+#define CAL_CSI2_CTX_PACK_MODE_LINE 0
+#define CAL_CSI2_CTX_PACK_MODE_FRAME 1
+#define CAL_CSI2_CTX_LINES_MASK GENMASK(29, 16)
+
+#define CAL_CSI2_STATUS_FRAME_MASK GENMASK(15, 0)
+
+#define CAL_CSI2_PHY_REG0_THS_SETTLE_MASK GENMASK(7, 0)
+#define CAL_CSI2_PHY_REG0_THS_TERM_MASK GENMASK(15, 8)
+#define CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_MASK BIT_MASK(24)
+#define CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_DISABLE 1
+#define CAL_CSI2_PHY_REG0_HSCLOCKCONFIG_ENABLE 0
+
+#define CAL_CSI2_PHY_REG1_TCLK_SETTLE_MASK GENMASK(7, 0)
+#define CAL_CSI2_PHY_REG1_CTRLCLK_DIV_FACTOR_MASK GENMASK(9, 8)
+#define CAL_CSI2_PHY_REG1_DPHY_HS_SYNC_PATTERN_MASK GENMASK(17, 10)
+#define CAL_CSI2_PHY_REG1_TCLK_TERM_MASK GENMASK(24, 18)
+#define CAL_CSI2_PHY_REG1_CLOCK_MISS_DETECTOR_STATUS_MASK BIT_MASK(25)
+#define CAL_CSI2_PHY_REG1_CLOCK_MISS_DETECTOR_STATUS_ERROR 1
+#define CAL_CSI2_PHY_REG1_CLOCK_MISS_DETECTOR_STATUS_SUCCESS 0
+#define CAL_CSI2_PHY_REG1_RESET_DONE_STATUS_MASK GENMASK(29, 28)
+
+#define CAL_CSI2_PHY_REG2_CCP2_SYNC_PATTERN_MASK GENMASK(23, 0)
+#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC3_MASK GENMASK(25, 24)
+#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC2_MASK GENMASK(27, 26)
+#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC1_MASK GENMASK(29, 28)
+#define CAL_CSI2_PHY_REG2_TRIGGER_CMD_RXTRIGESC0_MASK GENMASK(31, 30)
+
+#define CM_CAMERRX_CTRL_CSI1_CTRLCLKEN_MASK BIT_MASK(0)
+#define CM_CAMERRX_CTRL_CSI1_CAMMODE_MASK GENMASK(2, 1)
+#define CM_CAMERRX_CTRL_CSI1_LANEENABLE_MASK GENMASK(4, 3)
+#define CM_CAMERRX_CTRL_CSI1_MODE_MASK BIT_MASK(5)
+#define CM_CAMERRX_CTRL_CSI0_CTRLCLKEN_MASK BIT_MASK(10)
+#define CM_CAMERRX_CTRL_CSI0_CAMMODE_MASK GENMASK(12, 11)
+#define CM_CAMERRX_CTRL_CSI0_LANEENABLE_MASK GENMASK(16, 13)
+#define CM_CAMERRX_CTRL_CSI0_MODE_MASK BIT_MASK(17)
+
+#endif
if (ret)
platform_device_unregister(&vim2m_pdev);
- return 0;
+ return ret;
}
module_init(vim2m_init);
tpg->bytesperline[p] = plane_w / tpg->hdownsampling[p];
}
+ if (tpg_g_interleaved(tpg))
+ tpg->bytesperline[1] = tpg->bytesperline[0];
}
if (si476x_core_has_diversity(radio->core)) {
si476x_ctrls[SI476X_IDX_DIVERSITY_MODE].def =
si476x_phase_diversity_mode_to_idx(radio->core->diversity_mode);
- si476x_radio_add_new_custom(radio, SI476X_IDX_DIVERSITY_MODE);
+ rval = si476x_radio_add_new_custom(radio, SI476X_IDX_DIVERSITY_MODE);
if (rval < 0)
goto exit;
- si476x_radio_add_new_custom(radio, SI476X_IDX_INTERCHIP_LINK);
+ rval = si476x_radio_add_new_custom(radio, SI476X_IDX_INTERCHIP_LINK);
if (rval < 0)
goto exit;
}
/* RDS buffer blocks */
static u32 default_rds_buf = 300;
module_param(default_rds_buf, uint, 0444);
-MODULE_PARM_DESC(rds_buf, "RDS buffer entries");
+MODULE_PARM_DESC(default_rds_buf, "RDS buffer entries");
/* Radio Nr */
static u32 radio_nr = -1;
}
/* enter extended function mode */
-static inline void nvt_efm_enable(struct nvt_dev *nvt)
+static inline int nvt_efm_enable(struct nvt_dev *nvt)
{
+ if (!request_muxed_region(nvt->cr_efir, 2, NVT_DRIVER_NAME))
+ return -EBUSY;
+
/* Enabling Extended Function Mode explicitly requires writing 2x */
outb(EFER_EFM_ENABLE, nvt->cr_efir);
outb(EFER_EFM_ENABLE, nvt->cr_efir);
+
+ return 0;
}
/* exit extended function mode */
static inline void nvt_efm_disable(struct nvt_dev *nvt)
{
outb(EFER_EFM_DISABLE, nvt->cr_efir);
+
+ release_region(nvt->cr_efir, 2);
}
/*
*/
static inline void nvt_select_logical_dev(struct nvt_dev *nvt, u8 ldev)
{
- outb(CR_LOGICAL_DEV_SEL, nvt->cr_efir);
- outb(ldev, nvt->cr_efdr);
+ nvt_cr_write(nvt, ldev, CR_LOGICAL_DEV_SEL);
+}
+
+/* select and enable logical device with setting EFM mode*/
+static inline void nvt_enable_logical_dev(struct nvt_dev *nvt, u8 ldev)
+{
+ nvt_efm_enable(nvt);
+ nvt_select_logical_dev(nvt, ldev);
+ nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
+ nvt_efm_disable(nvt);
+}
+
+/* select and disable logical device with setting EFM mode*/
+static inline void nvt_disable_logical_dev(struct nvt_dev *nvt, u8 ldev)
+{
+ nvt_efm_enable(nvt);
+ nvt_select_logical_dev(nvt, ldev);
+ nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
+ nvt_efm_disable(nvt);
}
/* write val to cir config register */
return val;
}
+/* don't override io address if one is set already */
+static void nvt_set_ioaddr(struct nvt_dev *nvt, unsigned long *ioaddr)
+{
+ unsigned long old_addr;
+
+ old_addr = nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8;
+ old_addr |= nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO);
+
+ if (old_addr)
+ *ioaddr = old_addr;
+ else {
+ nvt_cr_write(nvt, *ioaddr >> 8, CR_CIR_BASE_ADDR_HI);
+ nvt_cr_write(nvt, *ioaddr & 0xff, CR_CIR_BASE_ADDR_LO);
+ }
+}
+
/* dump current cir register contents */
static void cir_dump_regs(struct nvt_dev *nvt)
{
/* detect hardware features */
-static void nvt_hw_detect(struct nvt_dev *nvt)
+static int nvt_hw_detect(struct nvt_dev *nvt)
{
const char *chip_name;
int chip_id;
nvt_efm_enable(nvt);
nvt->chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI);
}
-
nvt->chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO);
+ nvt_efm_disable(nvt);
+
chip_id = nvt->chip_major << 8 | nvt->chip_minor;
+ if (chip_id == NVT_INVALID) {
+ dev_err(&nvt->pdev->dev,
+ "No device found on either EFM port\n");
+ return -ENODEV;
+ }
+
chip_name = nvt_find_chip(nvt, chip_id);
/* warn, but still let the driver load, if we don't know this chip */
"found %s or compatible: chip id: 0x%02x 0x%02x",
chip_name, nvt->chip_major, nvt->chip_minor);
- nvt_efm_disable(nvt);
+ return 0;
}
static void nvt_cir_ldev_init(struct nvt_dev *nvt)
val |= psval;
nvt_cr_write(nvt, val, psreg);
- /* Select CIR logical device and enable */
+ /* Select CIR logical device */
nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
- nvt_cr_write(nvt, nvt->cir_addr >> 8, CR_CIR_BASE_ADDR_HI);
- nvt_cr_write(nvt, nvt->cir_addr & 0xff, CR_CIR_BASE_ADDR_LO);
+ nvt_set_ioaddr(nvt, &nvt->cir_addr);
nvt_cr_write(nvt, nvt->cir_irq, CR_CIR_IRQ_RSRC);
static void nvt_cir_wake_ldev_init(struct nvt_dev *nvt)
{
- /* Select ACPI logical device, enable it and CIR Wake */
+ /* Select ACPI logical device and anable it */
nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
/* enable pme interrupt of cir wakeup event */
nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2);
- /* Select CIR Wake logical device and enable */
+ /* Select CIR Wake logical device */
nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
- nvt_cr_write(nvt, nvt->cir_wake_addr >> 8, CR_CIR_BASE_ADDR_HI);
- nvt_cr_write(nvt, nvt->cir_wake_addr & 0xff, CR_CIR_BASE_ADDR_LO);
+ nvt_set_ioaddr(nvt, &nvt->cir_wake_addr);
nvt_cr_write(nvt, nvt->cir_wake_irq, CR_CIR_IRQ_RSRC);
/* clear out the hardware's cir wake rx fifo */
static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt)
{
- u8 val;
+ u8 val, config;
+
+ config = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON);
+
+ /* clearing wake fifo works in learning mode only */
+ nvt_cir_wake_reg_write(nvt, config & ~CIR_WAKE_IRCON_MODE0,
+ CIR_WAKE_IRCON);
val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON);
nvt_cir_wake_reg_write(nvt, val | CIR_WAKE_FIFOCON_RXFIFOCLR,
CIR_WAKE_FIFOCON);
+
+ nvt_cir_wake_reg_write(nvt, config, CIR_WAKE_IRCON);
}
/* clear out the hardware's cir tx fifo */
/* and finally, enable interrupts */
nvt_set_cir_iren(nvt);
+
+ /* enable the CIR logical device */
+ nvt_enable_logical_dev(nvt, LOGICAL_DEV_CIR);
}
static void nvt_cir_wake_regs_init(struct nvt_dev *nvt)
/* clear any and all stray interrupts */
nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
+
+ /* enable the CIR WAKE logical device */
+ nvt_enable_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE);
}
static void nvt_enable_wake(struct nvt_dev *nvt)
{
+ unsigned long flags;
+
nvt_efm_enable(nvt);
nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI);
nvt_efm_disable(nvt);
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+
nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN |
CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV |
CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL,
CIR_WAKE_IRCON);
nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS);
nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
+
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
}
#if 0 /* Currently unused */
/* copy data from hardware rx fifo into driver buffer */
static void nvt_get_rx_ir_data(struct nvt_dev *nvt)
{
- unsigned long flags;
u8 fifocount, val;
unsigned int b_idx;
bool overrun = false;
nvt_dbg("attempting to fetch %u bytes from hw rx fifo", fifocount);
- spin_lock_irqsave(&nvt->nvt_lock, flags);
-
b_idx = nvt->pkts;
/* This should never happen, but lets check anyway... */
if (overrun)
nvt_handle_rx_fifo_overrun(nvt);
-
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
}
static void nvt_cir_log_irqs(u8 status, u8 iren)
static bool nvt_cir_tx_inactive(struct nvt_dev *nvt)
{
unsigned long flags;
- bool tx_inactive;
u8 tx_state;
spin_lock_irqsave(&nvt->tx.lock, flags);
tx_state = nvt->tx.tx_state;
spin_unlock_irqrestore(&nvt->tx.lock, flags);
- tx_inactive = (tx_state == ST_TX_NONE);
-
- return tx_inactive;
+ return tx_state == ST_TX_NONE;
}
/* interrupt service routine for incoming and outgoing CIR data */
nvt_dbg_verbose("%s firing", __func__);
- nvt_efm_enable(nvt);
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_efm_disable(nvt);
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
/*
* Get IR Status register contents. Write 1 to ack/clear
* 0: CIR_IRSTS_GH - Min Length Detected
*/
status = nvt_cir_reg_read(nvt, CIR_IRSTS);
- if (!status) {
+ iren = nvt_cir_reg_read(nvt, CIR_IREN);
+
+ /* IRQ may be shared with CIR WAKE, therefore check for each
+ * status bit whether the related interrupt source is enabled
+ */
+ if (!(status & iren)) {
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
nvt_dbg_verbose("%s exiting, IRSTS 0x0", __func__);
- nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
return IRQ_NONE;
}
nvt_cir_reg_write(nvt, status, CIR_IRSTS);
nvt_cir_reg_write(nvt, 0, CIR_IRSTS);
- /* Interrupt may be shared with CIR Wake, bail if CIR not enabled */
- iren = nvt_cir_reg_read(nvt, CIR_IREN);
- if (!iren) {
- nvt_dbg_verbose("%s exiting, CIR not enabled", __func__);
- return IRQ_NONE;
- }
-
nvt_cir_log_irqs(status, iren);
if (status & CIR_IRSTS_RTR) {
if (nvt_cir_tx_inactive(nvt))
nvt_get_rx_ir_data(nvt);
- spin_lock_irqsave(&nvt->nvt_lock, flags);
-
cur_state = nvt->study_state;
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
if (cur_state == ST_STUDY_NONE)
nvt_clear_cir_fifo(nvt);
}
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
if (status & CIR_IRSTS_TE)
nvt_clear_tx_fifo(nvt);
nvt_dbg_wake("%s firing", __func__);
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+
status = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS);
- if (!status)
+ iren = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN);
+
+ /* IRQ may be shared with CIR, therefore check for each
+ * status bit whether the related interrupt source is enabled
+ */
+ if (!(status & iren)) {
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
return IRQ_NONE;
+ }
if (status & CIR_WAKE_IRSTS_IR_PENDING)
nvt_clear_cir_wake_fifo(nvt);
nvt_cir_wake_reg_write(nvt, status, CIR_WAKE_IRSTS);
nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IRSTS);
- /* Interrupt may be shared with CIR, bail if Wake not enabled */
- iren = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN);
- if (!iren) {
- nvt_dbg_wake("%s exiting, wake not enabled", __func__);
- return IRQ_HANDLED;
- }
-
if ((status & CIR_WAKE_IRSTS_PE) &&
(nvt->wake_state == ST_WAKE_START)) {
while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)) {
}
nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN);
- spin_lock_irqsave(&nvt->nvt_lock, flags);
nvt->wake_state = ST_WAKE_FINISH;
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
}
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+
nvt_dbg_wake("%s done", __func__);
return IRQ_HANDLED;
}
-static void nvt_enable_cir(struct nvt_dev *nvt)
+static void nvt_disable_cir(struct nvt_dev *nvt)
{
- /* set function enable flags */
- nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN |
- CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
- CIR_IRCON);
-
- nvt_efm_enable(nvt);
-
- /* enable the CIR logical device */
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
- nvt_efm_disable(nvt);
-
- /* clear all pending interrupts */
- nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+ unsigned long flags;
- /* enable interrupts */
- nvt_set_cir_iren(nvt);
-}
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
-static void nvt_disable_cir(struct nvt_dev *nvt)
-{
/* disable CIR interrupts */
nvt_cir_reg_write(nvt, 0, CIR_IREN);
nvt_clear_cir_fifo(nvt);
nvt_clear_tx_fifo(nvt);
- nvt_efm_enable(nvt);
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
/* disable the CIR logical device */
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
-
- nvt_efm_disable(nvt);
+ nvt_disable_logical_dev(nvt, LOGICAL_DEV_CIR);
}
static int nvt_open(struct rc_dev *dev)
unsigned long flags;
spin_lock_irqsave(&nvt->nvt_lock, flags);
- nvt_enable_cir(nvt);
+
+ /* set function enable flags */
+ nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN |
+ CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL,
+ CIR_IRCON);
+
+ /* clear all pending interrupts */
+ nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS);
+
+ /* enable interrupts */
+ nvt_set_cir_iren(nvt);
+
spin_unlock_irqrestore(&nvt->nvt_lock, flags);
+ /* enable the CIR logical device */
+ nvt_enable_logical_dev(nvt, LOGICAL_DEV_CIR);
+
return 0;
}
static void nvt_close(struct rc_dev *dev)
{
struct nvt_dev *nvt = dev->priv;
- unsigned long flags;
- spin_lock_irqsave(&nvt->nvt_lock, flags);
nvt_disable_cir(nvt);
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
}
/* Allocate memory, probe hardware, and initialize everything */
init_waitqueue_head(&nvt->tx.queue);
- nvt_hw_detect(nvt);
+ ret = nvt_hw_detect(nvt);
+ if (ret)
+ goto exit_free_dev_rdev;
/* Initialize CIR & CIR Wake Logical Devices */
nvt_efm_enable(nvt);
nvt_cir_wake_ldev_init(nvt);
nvt_efm_disable(nvt);
- /* Initialize CIR & CIR Wake Config Registers */
+ /*
+ * Initialize CIR & CIR Wake Config Registers
+ * and enable logical devices
+ */
nvt_cir_regs_init(nvt);
nvt_cir_wake_regs_init(nvt);
goto exit_unregister_device;
if (!devm_request_region(&pdev->dev, nvt->cir_wake_addr,
- CIR_IOREG_LENGTH, NVT_DRIVER_NAME))
+ CIR_IOREG_LENGTH, NVT_DRIVER_NAME "-wake"))
goto exit_unregister_device;
if (devm_request_irq(&pdev->dev, nvt->cir_wake_irq,
nvt_cir_wake_isr, IRQF_SHARED,
- NVT_DRIVER_NAME, (void *)nvt))
+ NVT_DRIVER_NAME "-wake", (void *)nvt))
goto exit_unregister_device;
device_init_wakeup(&pdev->dev, true);
static void nvt_remove(struct pnp_dev *pdev)
{
struct nvt_dev *nvt = pnp_get_drvdata(pdev);
- unsigned long flags;
- spin_lock_irqsave(&nvt->nvt_lock, flags);
- /* disable CIR */
- nvt_cir_reg_write(nvt, 0, CIR_IREN);
nvt_disable_cir(nvt);
+
/* enable CIR Wake (for IR power-on) */
nvt_enable_wake(nvt);
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
rc_unregister_device(nvt->rdev);
}
nvt_dbg("%s called", __func__);
- /* zero out misc state tracking */
- spin_lock_irqsave(&nvt->nvt_lock, flags);
- nvt->study_state = ST_STUDY_NONE;
- nvt->wake_state = ST_WAKE_NONE;
- spin_unlock_irqrestore(&nvt->nvt_lock, flags);
-
spin_lock_irqsave(&nvt->tx.lock, flags);
nvt->tx.tx_state = ST_TX_NONE;
spin_unlock_irqrestore(&nvt->tx.lock, flags);
+ spin_lock_irqsave(&nvt->nvt_lock, flags);
+
+ /* zero out misc state tracking */
+ nvt->study_state = ST_STUDY_NONE;
+ nvt->wake_state = ST_WAKE_NONE;
+
/* disable all CIR interrupts */
nvt_cir_reg_write(nvt, 0, CIR_IREN);
- nvt_efm_enable(nvt);
+ spin_unlock_irqrestore(&nvt->nvt_lock, flags);
/* disable cir logical dev */
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN);
-
- nvt_efm_disable(nvt);
+ nvt_disable_logical_dev(nvt, LOGICAL_DEV_CIR);
/* make sure wake is enabled */
nvt_enable_wake(nvt);
nvt_dbg("%s called", __func__);
- /* open interrupt */
- nvt_set_cir_iren(nvt);
-
- /* Enable CIR logical device */
- nvt_efm_enable(nvt);
- nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR);
- nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN);
-
- nvt_efm_disable(nvt);
-
nvt_cir_regs_init(nvt);
nvt_cir_wake_regs_init(nvt);
static void nvt_shutdown(struct pnp_dev *pdev)
{
struct nvt_dev *nvt = pnp_get_drvdata(pdev);
+
nvt_enable_wake(nvt);
}
NVT_W83667HG = 0xa510,
NVT_6775F = 0xb470,
NVT_6776F = 0xc330,
- NVT_6779D = 0xc560
+ NVT_6779D = 0xc560,
+ NVT_INVALID = 0xffff,
};
struct nvt_chip {
/* total length of CIR and CIR WAKE */
#define CIR_IOREG_LENGTH 0x0f
-/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL (0x7d0 = 2000) */
-#define CIR_RX_LIMIT_COUNT 0x7d0
+/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL */
+#define CIR_RX_LIMIT_COUNT (IR_DEFAULT_TIMEOUT / US_TO_NS(SAMPLE_PERIOD))
/* CIR Regs */
#define CIR_IRCON 0x00
#define CIR_WAKE_IREN_RTR 0x40
#define CIR_WAKE_IREN_PE 0x20
#define CIR_WAKE_IREN_RFO 0x10
-#define CIR_WAKE_IREN_TE 0x08
-#define CIR_WAKE_IREN_TTR 0x04
-#define CIR_WAKE_IREN_TFU 0x02
-#define CIR_WAKE_IREN_GH 0x01
+#define CIR_WAKE_IREN_GH 0x08
/* CIR WAKE FIFOCON settings */
#define CIR_WAKE_FIFOCON_RXFIFOCLR 0x08
#ifndef _RC_CORE_PRIV
#define _RC_CORE_PRIV
+/* Define the max number of pulse/space transitions to buffer */
+#define MAX_IR_EVENT_SIZE 512
+
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <media/rc-core.h>
struct list_head list; /* to keep track of raw clients */
struct task_struct *thread;
spinlock_t lock;
- struct kfifo_rec_ptr_1 kfifo; /* fifo for the pulse/space durations */
+ /* fifo for the pulse/space durations */
+ DECLARE_KFIFO(kfifo, struct ir_raw_event, MAX_IR_EVENT_SIZE);
ktime_t last_event; /* when last event occurred */
enum raw_event_type last_type; /* last event type */
struct rc_dev *dev; /* pointer to the parent rc_dev */
#include <linux/freezer.h>
#include "rc-core-priv.h"
-/* Define the max number of pulse/space transitions to buffer */
-#define MAX_IR_EVENT_SIZE 512
-
/* Used to keep track of IR raw clients, protected by ir_raw_handler_lock */
static LIST_HEAD(ir_raw_client_list);
struct ir_raw_event ev;
struct ir_raw_handler *handler;
struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
- int retval;
while (!kthread_should_stop()) {
spin_lock_irq(&raw->lock);
- retval = kfifo_len(&raw->kfifo);
- if (retval < sizeof(ev)) {
+ if (!kfifo_len(&raw->kfifo)) {
set_current_state(TASK_INTERRUPTIBLE);
if (kthread_should_stop())
continue;
}
- retval = kfifo_out(&raw->kfifo, &ev, sizeof(ev));
+ if(!kfifo_out(&raw->kfifo, &ev, 1))
+ dev_err(&raw->dev->dev, "IR event FIFO is empty!\n");
spin_unlock_irq(&raw->lock);
mutex_lock(&ir_raw_handler_lock);
IR_dprintk(2, "sample: (%05dus %s)\n",
TO_US(ev->duration), TO_STR(ev->pulse));
- if (kfifo_in(&dev->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
- return -ENOMEM;
+ if (!kfifo_put(&dev->raw->kfifo, *ev)) {
+ dev_err(&dev->dev, "IR event FIFO is full!\n");
+ return -ENOSPC;
+ }
return 0;
}
dev->raw->dev = dev;
dev->change_protocol = change_protocol;
- rc = kfifo_alloc(&dev->raw->kfifo,
- sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
- GFP_KERNEL);
- if (rc < 0)
- goto out;
+ INIT_KFIFO(dev->raw->kfifo);
spin_lock_init(&dev->raw->lock);
dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw,
handler->raw_unregister(dev);
mutex_unlock(&ir_raw_handler_lock);
- kfifo_free(&dev->raw->kfifo);
kfree(dev->raw);
dev->raw = NULL;
}
dev_dbg(&dev->client->dev, "%s:\n", __func__);
ret = regmap_write(dev->regmap, 0x07, 0x6d);
- if (ret)
- goto err;
- usleep_range(5000, 10000);
-err:
- if (ret)
+ if (ret) {
dev_dbg(&dev->client->dev, "failed=%d\n", ret);
- return ret;
+ return ret;
+ }
+ usleep_range(5000, 10000);
+ return 0;
}
static int m88rs6000t_get_frequency(struct dvb_frontend *fe, u32 *frequency)
v4l2_std_id std, u32 delsys)
{
struct r820t_priv *priv = fe->tuner_priv;
- int rc = -EINVAL;
+ int rc;
u32 lo_freq;
tuner_dbg("should set frequency to %d kHz, bw %d MHz\n",
static const struct dvb_tuner_ops si2157_ops = {
.info = {
.name = "Silicon Labs Si2146/2147/2148/2157/2158",
- .frequency_min = 55000000,
- .frequency_max = 862000000,
+ .frequency_min = 42000000,
+ .frequency_max = 870000000,
},
.init = si2157_init,
dev_dbg(&client->dev, "\n");
+ /* stop statistics polling */
+ cancel_delayed_work_sync(&dev->stat_work);
+
memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops));
fe->tuner_priv = NULL;
kfree(dev);
* in order to avoid troubles during device release.
*/
kfree(priv->ctrl.fname);
+ priv->ctrl.fname = NULL;
memcpy(&priv->ctrl, p, sizeof(priv->ctrl));
if (p->fname) {
priv->ctrl.fname = kstrdup(p->fname, GFP_KERNEL);
if (priv->ctrl.fname == NULL)
- rc = -ENOMEM;
+ return -ENOMEM;
}
/*
struct as10x_cmd_t *cmd, *rsp;
/* bus adapter private ops callback */
- struct as102_priv_ops_t *ops;
+ const struct as102_priv_ops_t *ops;
};
struct as102_dev_t {
return actual_len;
}
-static struct as102_priv_ops_t as102_priv_ops = {
+static const struct as102_priv_ops_t as102_priv_ops = {
.upload_fw_pkt = as102_send_ep1,
.xfer_cmd = as102_usb_xfer_cmd,
.as102_read_ep2 = as102_read_ep2,
return -EINVAL;
if (tuner) {
- ret = media_create_pad_link(tuner, TUNER_PAD_IF_OUTPUT,
+ ret = media_create_pad_link(tuner, TUNER_PAD_OUTPUT,
decoder, 0,
MEDIA_LNK_FL_ENABLED);
if (ret)
static int start_urb_transfer(struct au0828_dev *dev)
{
struct urb *purb;
- int i, ret = -ENOMEM;
+ int i, ret;
dprintk(2, "%s()\n", __func__);
dev->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urbs[i])
- goto err;
+ return -ENOMEM;
purb = dev->urbs[i];
if (!purb->transfer_buffer) {
usb_free_urb(purb);
dev->urbs[i] = NULL;
+ ret = -ENOMEM;
pr_err("%s: failed big buffer allocation, err = %d\n",
__func__, ret);
- goto err;
+ return ret;
}
purb->status = -EINPROGRESS;
}
dev->urb_streaming = true;
- ret = 0;
-
-err:
- return ret;
+ return 0;
}
static void au0828_start_transport(struct au0828_dev *dev)
/* Version information */
#define DRIVER_VERSION "0.1"
#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver"
-#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>"
+#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@posteo.de>"
/* debug */
#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
buffer_size = urb->actual_length;
buffer = kmalloc(buffer_size, GFP_ATOMIC);
+ if (!buffer)
+ return -ENOMEM;
memcpy(buffer, dma_q->ps_head, 3);
memcpy(buffer+3, p_buffer, buffer_size-3);
}
dev->adev.users--;
+ if (substream->runtime->dma_area) {
+ dev_dbg(dev->dev, "freeing\n");
+ vfree(substream->runtime->dma_area);
+ substream->runtime->dma_area = NULL;
+ }
mutex_unlock(&dev->lock);
if (dev->adev.users == 0 && dev->adev.shutdown == 1) {
return 0;
if (tuner) {
- ret = media_create_pad_link(tuner, TUNER_PAD_IF_OUTPUT, decoder, 0,
+ ret = media_create_pad_link(tuner, TUNER_PAD_OUTPUT, decoder, 0,
MEDIA_LNK_FL_ENABLED);
if (ret < 0)
return ret;
if (ret < 0)
goto err;
- if (tmp == 1 || tmp == 3) {
+ if (tmp == 1 || tmp == 3 || tmp == 5) {
/* configure gpioh1, reset & power slave demod */
ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01);
if (ret < 0)
if (ret < 0)
goto err;
- if (tmp == 1 || tmp == 3)
+ if (tmp == 1 || tmp == 3 || tmp == 5)
state->dual_mode = true;
dev_dbg(&d->udev->dev, "%s: ts mode=%d dual mode=%d\n", __func__,
* 0 TS
* 1 DCA + PIP
* 3 PIP
+ * 5 DCA + PIP
* n DCA
*
- * Values 0 and 3 are seen to this day. 0 for single TS and 3 for dual TS.
+ * Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS.
*/
#define EEPROM_BASE_AF9035 0x42fd
/*
* DVB USB framework
*
- * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@posteo.de>
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
/*
* DVB USB framework
*
- * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@posteo.de>
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
/*
* DVB USB framework
*
- * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@posteo.de>
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
EXPORT_SYMBOL(dvb_usbv2_reset_resume);
MODULE_VERSION("2.0");
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("DVB USB common");
MODULE_LICENSE("GPL");
/*
* DVB USB framework
*
- * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@posteo.de>
* Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI,
&dvbsky_t680c_props, "TechnoTrend TT-connect CT2-4650 CI",
RC_MAP_TT_1500) },
+ { DVB_USB_DEVICE(USB_VID_TECHNOTREND,
+ USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI_2,
+ &dvbsky_t680c_props, "TechnoTrend TT-connect CT2-4650 CI v1.1",
+ RC_MAP_TT_1500) },
{ DVB_USB_DEVICE(USB_VID_TERRATEC,
USB_PID_TERRATEC_H7_3,
&dvbsky_t680c_props, "Terratec H7 Rev.4",
RC_MAP_TT_1500) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_S2_R4,
+ &dvbsky_s960_props, "Terratec Cinergy S2 Rev.4",
+ RC_MAP_DVBSKY) },
{ }
};
MODULE_DEVICE_TABLE(usb, dvbsky_id_table);
struct mxl111sf_tuner_state {
struct mxl111sf_state *mxl_state;
- struct mxl111sf_tuner_config *cfg;
+ const struct mxl111sf_tuner_config *cfg;
enum mxl_if_freq if_freq;
};
struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
- struct mxl111sf_state *mxl_state,
- struct mxl111sf_tuner_config *cfg)
+ struct mxl111sf_state *mxl_state,
+ const struct mxl111sf_tuner_config *cfg)
{
struct mxl111sf_tuner_state *state = NULL;
#if IS_ENABLED(CONFIG_DVB_USB_MXL111SF)
extern
struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
- struct mxl111sf_state *mxl_state,
- struct mxl111sf_tuner_config *cfg);
+ struct mxl111sf_state *mxl_state,
+ const struct mxl111sf_tuner_config *cfg);
#else
static inline
struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
- struct mxl111sf_state *mxl_state,
- struct mxl111sf_tuner_config *cfg)
+ struct mxl111sf_state *mxl_state,
+ const struct mxl111sf_tuner_config *cfg)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
return 0;
}
-static struct mxl111sf_tuner_config mxl_tuner_config = {
+static const struct mxl111sf_tuner_config mxl_tuner_config = {
.if_freq = MXL_IF_6_0, /* applies to external IF output, only */
.invert_spectrum = 0,
.read_reg = mxl111sf_read_reg,
state->tuner.function = MEDIA_ENT_F_TUNER;
state->tuner.name = "mxl111sf tuner";
state->tuner_pads[TUNER_PAD_RF_INPUT].flags = MEDIA_PAD_FL_SINK;
- state->tuner_pads[TUNER_PAD_IF_OUTPUT].flags = MEDIA_PAD_FL_SOURCE;
+ state->tuner_pads[TUNER_PAD_OUTPUT].flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&state->tuner,
TUNER_NUM_PADS, state->tuner_pads);
ret = -EOPNOTSUPP;
}
+ /* Retry failed I2C messages */
+ if (ret == -EPIPE)
+ ret = -EAGAIN;
+
err_mutex_unlock:
mutex_unlock(&d->i2c_mutex);
}
dev_dbg(&d->intf->dev, "chip_id=%u\n", dev->chip_id);
+ /* Retry failed I2C messages */
+ d->i2c_adap.retries = 1;
+ d->i2c_adap.timeout = msecs_to_jiffies(10);
+
return WARM;
err:
dev_dbg(&d->intf->dev, "failed=%d\n", ret);
/* usb-urb.c is part of the DVB USB library.
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* This file keeps functions for initializing and handling the
/* DVB USB framework compliant Linux driver for the AVerMedia AverTV DVB-T
* USB2.0 (A800) DVB-T receiver.
*
- * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* Thanks to
* - AVerMedia who kindly provided information and
module_usb_driver(a800_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("AVerMedia AverTV DVB-T USB 2.0 (A800)");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
*
* TODO: Use the cx25840-driver for the analogue part
*
- * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@posteo.de)
* Copyright (C) 2006 Michael Krufky (mkrufky@linuxtv.org)
* Copyright (C) 2006, 2007 Chris Pascoe (c.pascoe@itee.uq.edu.au)
*
module_usb_driver(cxusb_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design");
module_usb_driver(dib0700_driver);
MODULE_FIRMWARE("dvb-usb-dib0700-1.20.fw");
-MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for devices based on DiBcom DiB0700 - USB bridge");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
struct dib0700_adapter_state *st = adap->priv;
struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1);
- if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
- return -ENODEV;
+ if (adap->id == 0) {
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+ return -ENODEV;
+ } else {
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL)
+ return -ENODEV;
+ }
st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override;
return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
}
+static int stk809x_frontend1_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *state = adap->priv;
+
+ if (!dvb_attach(dib8000_attach, &state->dib8000_ops))
+ return -ENODEV;
+
+ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x82, 0);
+
+ adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap)
{
struct dib0700_adapter_state *st = adap->priv;
/* 80 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_2) },
{ USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E) },
{ USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_2002E_SE) },
+ { USB_DEVICE(USB_VID_PCTV, USB_PID_DIBCOM_STK8096PVR) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
RC_BIT_NEC,
.change_protocol = dib0700_change_protocol,
},
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 2,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = stk809x_frontend_attach,
+ .tuner_attach = dib809x_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+ } },
+ .size_of_priv =
+ sizeof(struct dib0700_adapter_state),
+ }, {
+ .num_frontends = 1,
+ .fe = { {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = stk809x_frontend1_attach,
+ .tuner_attach = dib809x_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+ } },
+ .size_of_priv =
+ sizeof(struct dib0700_adapter_state),
+ },
+ },
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom STK8096-PVR reference design",
+ { &dib0700_usb_id_table[83], NULL },
+ { NULL },
+ },
+ },
+
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_BIT_RC5 |
+ RC_BIT_RC6_MCE |
+ RC_BIT_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
},
};
/* Common methods for dibusb-based-receivers.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
/* DVB USB compliant linux driver for mobile DVB-T USB devices based on
* reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B)
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* based on GPL code from DiBcom, which has
- * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
+ * Copyright (C) 2004 Amaury Demol for DiBcom
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
module_usb_driver(dibusb_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
/* DVB USB compliant linux driver for mobile DVB-T USB devices based on
* reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-C/P)
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* based on GPL code from DiBcom, which has
- * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
+ * Copyright (C) 2004 Amaury Demol for DiBcom
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
module_usb_driver(dibusb_mc_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for DiBcom USB2.0 DVB-T (DiB3000M-C/P based) devices");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
/* Header file for all dibusb-based-receivers.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
/* DVB USB compliant linux driver for Nebula Electronics uDigiTV DVB-T USB2.0
* receiver
*
- * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* partly based on the SDK published by Nebula Electronics
*
module_usb_driver(digitv_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for Nebula Electronics uDigiTV DVB-T USB2.0");
MODULE_VERSION("1.0-alpha");
MODULE_LICENSE("GPL");
/* Frontend part of the Linux driver for the WideView/ Yakumo/ Hama/
* Typhoon/ Yuan DVB-T USB2.0 receiver.
*
- * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@posteo.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
/* DVB USB library compliant Linux driver for the WideView/ Yakumo/ Hama/
* Typhoon/ Yuan/ Miglia DVB-T USB2.0 receiver.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* Thanks to Steve Chang from WideView for providing support for the WT-220U.
*
module_usb_driver(dtt200u_usb_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon/Club3D/Miglia DVB-T USB2.0 devices");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
/* Common header file of Linux driver for the WideView/ Yakumo/ Hama/
* Typhoon/ Yuan DVB-T USB2.0 receiver.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
/* dvb-usb-common.h is part of the DVB USB library.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* a header file containing prototypes and types for internal use of the dvb-usb-lib
/* dvb-usb-dvb.c is part of the DVB USB library.
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* This file contains functions for initializing and handling the
/* dvb-usb-firmware.c is part of the DVB USB library.
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* This file contains functions for downloading the firmware to Cypress FX 1 and 2 based devices.
/* dvb-usb-i2c.c is part of the DVB USB library.
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* This file contains functions for (de-)initializing an I2C adapter.
*
* dvb-usb-init.c
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
EXPORT_SYMBOL(dvb_usb_device_exit);
MODULE_VERSION("1.0");
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices");
MODULE_LICENSE("GPL");
/* dvb-usb-remote.c is part of the DVB USB library.
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* This file contains functions for initializing the input-device and for handling remote-control-queries.
/* dvb-usb-urb.c is part of the DVB USB library.
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* This file keeps functions for initializing and handling the
/* dvb-usb.h is part of the DVB USB library.
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* the headerfile, all dvb-usb-drivers have to include.
TECHNOTREND_S2_4600,
TEVII_S482_1,
TEVII_S482_2,
+ TERRATEC_CINERGY_S2_BOX,
};
static struct usb_device_id dw2102_table[] = {
[TEVII_S660] = {USB_DEVICE(0x9022, USB_PID_TEVII_S660)},
[PROF_7500] = {USB_DEVICE(0x3034, 0x7500)},
[GENIATECH_SU3000] = {USB_DEVICE(0x1f4d, 0x3000)},
- [TERRATEC_CINERGY_S2] = {USB_DEVICE(USB_VID_TERRATEC, 0x00a8)},
+ [TERRATEC_CINERGY_S2] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_S2_R1)},
[TEVII_S480_1] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_1)},
[TEVII_S480_2] = {USB_DEVICE(0x9022, USB_PID_TEVII_S480_2)},
[X3M_SPC1400HD] = {USB_DEVICE(0x1f4d, 0x3100)},
[TEVII_S421] = {USB_DEVICE(0x9022, USB_PID_TEVII_S421)},
[TEVII_S632] = {USB_DEVICE(0x9022, USB_PID_TEVII_S632)},
- [TERRATEC_CINERGY_S2_R2] = {USB_DEVICE(USB_VID_TERRATEC, 0x00b0)},
+ [TERRATEC_CINERGY_S2_R2] = {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_S2_R2)},
[GOTVIEW_SAT_HD] = {USB_DEVICE(0x1FE1, USB_PID_GOTVIEW_SAT_HD)},
[GENIATECH_T220] = {USB_DEVICE(0x1f4d, 0xD220)},
[TECHNOTREND_S2_4600] = {USB_DEVICE(USB_VID_TECHNOTREND,
USB_PID_TECHNOTREND_CONNECT_S2_4600)},
[TEVII_S482_1] = {USB_DEVICE(0x9022, 0xd483)},
[TEVII_S482_2] = {USB_DEVICE(0x9022, 0xd484)},
+ [TERRATEC_CINERGY_S2_BOX] = {USB_DEVICE(USB_VID_TERRATEC, 0x0105)},
{ }
};
} },
}
},
- .num_device_descs = 3,
+ .num_device_descs = 4,
.devices = {
{ "TechnoTrend TT-connect S2-4600",
{ &dw2102_table[TECHNOTREND_S2_4600], NULL },
{ &dw2102_table[TEVII_S482_2], NULL },
{ NULL },
},
+ { "Terratec Cinergy S2 USB BOX",
+ { &dw2102_table[TERRATEC_CINERGY_S2_BOX], NULL },
+ { NULL },
+ },
}
};
/* DVB USB framework compliant Linux driver for the Hauppauge WinTV-NOVA-T usb2
* DVB-T receiver.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
module_usb_driver(nova_t_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Hauppauge WinTV-NOVA-T usb2");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
&a->dev->i2c_adap, STV090x_DEMODULATOR_0);
if (a->fe_adap[0].fe) {
- struct stv6110x_devctl *ctl;
+ const struct stv6110x_devctl *ctl;
ctl = dvb_attach(stv6110x_attach,
a->fe_adap[0].fe,
module_usb_driver(ttusb2_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
/* DVB USB framework compliant Linux driver for the HanfTek UMT-010 USB2.0
* DVB-T receiver.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
module_usb_driver(umt_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for HanfTek UMT 010 USB2.0 DVB-T device");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
/* usb-urb.c is part of the DVB USB library.
*
- * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@posteo.de)
* see dvb-usb-init.c for copyright information.
*
* This file keeps functions for initializing and handling the
* Copyright (C) 2005 Ralph Metzler <rjkm@metzlerbros.de>
* Metzler Brothers Systementwicklung GbR
*
- * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@posteo.de>
*
* Thanks to Twinhan who kindly provided hardware and information.
*
* Copyright (C) 2005 Ralph Metzler <rjkm@metzlerbros.de>
* Metzler Brothers Systementwicklung GbR
*
- * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de>
+ * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@posteo.de>
*
* Thanks to Twinhan who kindly provided hardware and information.
*
module_usb_driver(vp702x_usb_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for Twinhan StarBox DVB-S USB2.0 and clones");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
/* DVB frontend part of the Linux driver for TwinhanDTV Alpha/MagicBoxII USB2.0
* DVB-T receiver.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* Thanks to Twinhan who kindly provided hardware and information.
*
* - TwinhanDTV Alpha/MagicBoxII USB2.0 DVB-T receiver
* - DigitalNow TinyUSB2 DVB-t receiver
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* Thanks to Twinhan who kindly provided hardware and information.
*
module_usb_driver(vp7045_usb_driver);
-MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
MODULE_DESCRIPTION("Driver for Twinhan MagicBox/Alpha and DNTV tinyUSB2 DVB-T USB2.0");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
/* Common header-file of the Linux driver for the TwinhanDTV Alpha/MagicBoxII
* USB2.0 DVB-T receiver.
*
- * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de)
+ * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de)
*
* Thanks to Twinhan who kindly provided hardware and information.
*
i2c_master_send(&dev->i2c_client[dev->def_i2c_bus],
®s[i][0], 3);
+ /* FIXME: This won't be creating a sensor at the media graph */
+
return 0;
}
i2c_master_send(&dev->i2c_client[dev->def_i2c_bus],
®s[i][0], 3);
+ /* FIXME: This won't be creating a sensor at the media graph */
+
return 0;
}
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = silvercrest_reg_seq,
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
.tda9887_conf = TDA9887_PRESENT,
.decoder = EM28XX_SAA711X,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE4,
.amux = EM28XX_AMUX_AUX,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE5,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
.gpio = silvercrest_reg_seq,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_LINE_IN,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_SAA711X,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = 0,
.amux = EM28XX_AMUX_VIDEO,
} },
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT, /* Capture only device */
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_TVP5150,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = terratec_cinergy_USB_XS_FR_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = terratec_cinergy_USB_XS_FR_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.vmux = SAA7115_COMPOSITE4,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT, /* capture only board */
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.tuner_type = TUNER_ABSENT, /* Capture-only board */
.decoder = EM28XX_SAA711X,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = vc211a_enable,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.tuner_type = TUNER_ABSENT, /* capture only board */
.decoder = EM28XX_SAA711X,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.aout = EM28XX_AOUT_MONO | /* I2S */
EM28XX_AOUT_MASTER, /* Line out pin */
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.buttons = std_snapshot_button,
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_YMEC_TVF_5533MF,
+ .tuner_addr = 0x60,
.decoder = EM28XX_SAA711X,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.aout = EM28XX_AOUT_MONO | /* I2S */
EM28XX_AOUT_MASTER, /* Line out pin */
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
} },
},
.amux = EM28XX_AMUX_VIDEO,
.gpio = em2880_msi_digivox_ad_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = em2880_msi_digivox_ad_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2880_msi_digivox_ad_analog,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
.gpio = em2882_kworld_315u_analog,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = em2882_kworld_315u_analog1,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = default_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = default_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = pinnacle_hybrid_pro_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = pinnacle_hybrid_pro_analog,
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.amux = EM28XX_AMUX_VIDEO,
.gpio = hauppauge_wintv_hvr_900_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = hauppauge_wintv_hvr_900_analog,
.gpio = kworld_330u_analog,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = kworld_330u_analog,
.amux = EM28XX_AMUX_VIDEO,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.vmux = TVP5150_COMPOSITE0,
.amux = EM28XX_AMUX_VIDEO,
}, { /* Composite has not been tested yet */
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_VIDEO,
}, { /* S-video has not been tested yet */
.decoder = EM28XX_SAA711X,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.mute_gpio = terratec_av350_mute_gpio,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AUDIO_SRC_LINE,
.gpio = terratec_av350_unmute_gpio,
.decoder = EM28XX_SAA711X,
.tuner_type = TUNER_ABSENT, /* Capture only device */
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.amux = EM28XX_AMUX_VIDEO,
.gpio = evga_indtube_analog,
}, {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
.gpio = evga_indtube_analog,
.tuner_type = TUNER_ABSENT,
.decoder = EM28XX_SAA711X,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = SAA7115_COMPOSITE0,
.amux = EM28XX_AMUX_LINE_IN,
}, {
.tuner_type = TUNER_ABSENT,
.is_webcam = 1,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.amux = EM28XX_AMUX_VIDEO,
.gpio = speedlink_vad_laplace_reg_seq,
} },
.tuner_type = TUNER_ABSENT, /* Capture only device */
.decoder = EM28XX_TVP5150,
.input = { {
- .type = EM28XX_VMUX_COMPOSITE1,
+ .type = EM28XX_VMUX_COMPOSITE,
.vmux = TVP5150_COMPOSITE1,
.amux = EM28XX_AMUX_LINE_IN,
}, {
flush_work(&dev->request_module_wk);
}
+static int em28xx_media_device_init(struct em28xx *dev,
+ struct usb_device *udev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct media_device *mdev;
+
+ mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
+ if (!mdev)
+ return -ENOMEM;
+
+ mdev->dev = &udev->dev;
+
+ if (!dev->name)
+ strlcpy(mdev->model, "unknown em28xx", sizeof(mdev->model));
+ else
+ strlcpy(mdev->model, dev->name, sizeof(mdev->model));
+ if (udev->serial)
+ strlcpy(mdev->serial, udev->serial, sizeof(mdev->serial));
+ strcpy(mdev->bus_info, udev->devpath);
+ mdev->hw_revision = le16_to_cpu(udev->descriptor.bcdDevice);
+ mdev->driver_version = LINUX_VERSION_CODE;
+
+ media_device_init(mdev);
+
+ dev->media_dev = mdev;
+#endif
+ return 0;
+}
+
+static void em28xx_unregister_media_device(struct em28xx *dev)
+{
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+ if (dev->media_dev) {
+ media_device_unregister(dev->media_dev);
+ media_device_cleanup(dev->media_dev);
+ kfree(dev->media_dev);
+ dev->media_dev = NULL;
+ }
+#endif
+}
+
/*
* em28xx_release_resources()
* unregisters the v4l2,i2c and usb devices
mutex_lock(&dev->lock);
+ em28xx_unregister_media_device(dev);
+
if (dev->def_i2c_bus)
em28xx_i2c_unregister(dev, 1);
em28xx_i2c_unregister(dev, 0);
*/
snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno);
+ em28xx_media_device_init(dev, udev);
+
if (dev->is_audio_only) {
retval = em28xx_audio_setup(dev);
if (retval)
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
- /* allocate device struct */
+ /* allocate device struct and check if the device is a webcam */
mutex_init(&dev->lock);
retval = em28xx_init_dev(dev, udev, interface, nr);
if (retval) {
try_bulk = usb_xfer_mode > 0;
}
+ /* Disable V4L2 if the device doesn't have a decoder */
+ if (has_video &&
+ dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) {
+ printk(DRIVER_NAME
+ ": Currently, V4L2 is not supported on this model\n");
+ has_video = false;
+ dev->has_video = false;
+ }
+
/* Select USB transfer types to use */
if (has_video) {
if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk))
request_modules(dev);
- /* Should be the last thing to do, to avoid newer udev's to
- open the device before fully initializing it
+ /*
+ * Do it at the end, to reduce dynamic configuration changes during
+ * the device init. Yet, as request_modules() can be async, the
+ * topology will likely change after the load of the em28xx subdrivers.
*/
+#ifdef CONFIG_MEDIA_CONTROLLER
+ retval = media_device_register(dev->media_dev);
+#endif
return 0;
dev->name, result);
goto fail_adapter;
}
+#ifdef CONFIG_MEDIA_CONTROLLER_DVB
+ dvb->adapter.mdev = dev->media_dev;
+#endif
/* Ensure all frontends negotiate bus access */
dvb->fe[0]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl;
/* register network adapter */
dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
+
+ result = dvb_create_media_graph(&dvb->adapter, false);
+ if (result < 0)
+ goto fail_create_graph;
+
return 0;
+fail_create_graph:
+ dvb_net_release(&dvb->net);
fail_fe_conn:
dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
fail_fe_mem:
v4l2_device_call_all(v4l2_dev, 0, core, reset, 0);
v4l2_device_call_all(v4l2_dev, 0, video, s_routing,
INPUT(dev->ctl_input)->vmux, 0, 0);
- v4l2_device_call_all(v4l2_dev, 0, video, s_stream, 0);
}
static int em28xx_colorlevels_set_default(struct em28xx *dev)
em28xx_videodbg("res: put %d\n", res_type);
}
+static void em28xx_v4l2_media_release(struct em28xx *dev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+ int i;
+
+ for (i = 0; i < MAX_EM28XX_INPUT; i++) {
+ if (!INPUT(i)->type)
+ return;
+ media_device_unregister_entity(&dev->input_ent[i]);
+ }
+#endif
+}
+
+/*
+ * Media Controller helper functions
+ */
+
+static int em28xx_v4l2_create_media_graph(struct em28xx *dev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct em28xx_v4l2 *v4l2 = dev->v4l2;
+ struct media_device *mdev = dev->media_dev;
+ struct media_entity *entity;
+ struct media_entity *if_vid = NULL, *if_aud = NULL;
+ struct media_entity *tuner = NULL, *decoder = NULL;
+ int i, ret;
+
+ if (!mdev)
+ return 0;
+
+ /* Webcams are really simple */
+ if (dev->board.is_webcam) {
+ media_device_for_each_entity(entity, mdev) {
+ if (entity->function != MEDIA_ENT_F_CAM_SENSOR)
+ continue;
+ ret = media_create_pad_link(entity, 0,
+ &v4l2->vdev.entity, 0,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ }
+ return 0;
+ }
+
+ /* Non-webcams have analog TV decoder and other complexities */
+
+ media_device_for_each_entity(entity, mdev) {
+ switch (entity->function) {
+ case MEDIA_ENT_F_IF_VID_DECODER:
+ if_vid = entity;
+ break;
+ case MEDIA_ENT_F_IF_AUD_DECODER:
+ if_aud = entity;
+ break;
+ case MEDIA_ENT_F_TUNER:
+ tuner = entity;
+ break;
+ case MEDIA_ENT_F_ATV_DECODER:
+ decoder = entity;
+ break;
+ }
+ }
+
+ /* Analog setup, using tuner as a link */
+
+ /* Something bad happened! */
+ if (!decoder)
+ return -EINVAL;
+
+ if (tuner) {
+ if (if_vid) {
+ ret = media_create_pad_link(tuner, TUNER_PAD_OUTPUT,
+ if_vid,
+ IF_VID_DEC_PAD_IF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ ret = media_create_pad_link(if_vid, IF_VID_DEC_PAD_OUT,
+ decoder, DEMOD_PAD_IF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ } else {
+ ret = media_create_pad_link(tuner, TUNER_PAD_OUTPUT,
+ decoder, DEMOD_PAD_IF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ }
+
+ if (if_aud) {
+ ret = media_create_pad_link(tuner, TUNER_PAD_AUD_OUT,
+ if_aud,
+ IF_AUD_DEC_PAD_IF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ } else {
+ if_aud = tuner;
+ }
+
+ }
+ ret = media_create_pad_link(decoder, DEMOD_PAD_VID_OUT,
+ &v4l2->vdev.entity, 0,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+
+ if (em28xx_vbi_supported(dev)) {
+ ret = media_create_pad_link(decoder, DEMOD_PAD_VBI_OUT,
+ &v4l2->vbi_dev.entity, 0,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < MAX_EM28XX_INPUT; i++) {
+ struct media_entity *ent = &dev->input_ent[i];
+
+ if (!INPUT(i)->type)
+ break;
+
+ switch (INPUT(i)->type) {
+ case EM28XX_VMUX_COMPOSITE:
+ case EM28XX_VMUX_SVIDEO:
+ ret = media_create_pad_link(ent, 0, decoder,
+ DEMOD_PAD_IF_INPUT, 0);
+ if (ret)
+ return ret;
+ break;
+ default: /* EM28XX_VMUX_TELEVISION or EM28XX_RADIO */
+ if (!tuner)
+ break;
+
+ ret = media_create_pad_link(ent, 0, tuner,
+ TUNER_PAD_RF_INPUT,
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ return ret;
+ break;
+ }
+ }
+#endif
+ return 0;
+}
+
+static int em28xx_enable_analog_tuner(struct em28xx *dev)
+{
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct media_device *mdev = dev->media_dev;
+ struct em28xx_v4l2 *v4l2 = dev->v4l2;
+ struct media_entity *source;
+ struct media_link *link, *found_link = NULL;
+ int ret, active_links = 0;
+
+ if (!mdev || !v4l2->decoder)
+ return 0;
+
+ /*
+ * This will find the tuner that is connected into the decoder.
+ * Technically, this is not 100% correct, as the device may be
+ * using an analog input instead of the tuner. However, as we can't
+ * do DVB streaming while the DMA engine is being used for V4L2,
+ * this should be enough for the actual needs.
+ */
+ list_for_each_entry(link, &v4l2->decoder->links, list) {
+ if (link->sink->entity == v4l2->decoder) {
+ found_link = link;
+ if (link->flags & MEDIA_LNK_FL_ENABLED)
+ active_links++;
+ break;
+ }
+ }
+
+ if (active_links == 1 || !found_link)
+ return 0;
+
+ source = found_link->source->entity;
+ list_for_each_entry(link, &source->links, list) {
+ struct media_entity *sink;
+ int flags = 0;
+
+ sink = link->sink->entity;
+
+ if (sink == v4l2->decoder)
+ flags = MEDIA_LNK_FL_ENABLED;
+
+ ret = media_entity_setup_link(link, flags);
+ if (ret) {
+ pr_err("Couldn't change link %s->%s to %s. Error %d\n",
+ source->name, sink->name,
+ flags ? "enabled" : "disabled",
+ ret);
+ return ret;
+ } else
+ em28xx_videodbg("link %s->%s was %s\n",
+ source->name, sink->name,
+ flags ? "ENABLED" : "disabled");
+ }
+#endif
+ return 0;
+}
+
+static const char * const iname[] = {
+ [EM28XX_VMUX_COMPOSITE] = "Composite",
+ [EM28XX_VMUX_SVIDEO] = "S-Video",
+ [EM28XX_VMUX_TELEVISION] = "Television",
+ [EM28XX_RADIO] = "Radio",
+};
+
+static void em28xx_v4l2_create_entities(struct em28xx *dev)
+{
+#if defined(CONFIG_MEDIA_CONTROLLER)
+ struct em28xx_v4l2 *v4l2 = dev->v4l2;
+ int ret, i;
+
+ /* Initialize Video, VBI and Radio pads */
+ v4l2->video_pad.flags = MEDIA_PAD_FL_SINK;
+ ret = media_entity_pads_init(&v4l2->vdev.entity, 1, &v4l2->video_pad);
+ if (ret < 0)
+ pr_err("failed to initialize video media entity!\n");
+
+ if (em28xx_vbi_supported(dev)) {
+ v4l2->vbi_pad.flags = MEDIA_PAD_FL_SINK;
+ ret = media_entity_pads_init(&v4l2->vbi_dev.entity, 1,
+ &v4l2->vbi_pad);
+ if (ret < 0)
+ pr_err("failed to initialize vbi media entity!\n");
+ }
+
+ /* Webcams don't have input connectors */
+ if (dev->board.is_webcam)
+ return;
+
+ /* Create entities for each input connector */
+ for (i = 0; i < MAX_EM28XX_INPUT; i++) {
+ struct media_entity *ent = &dev->input_ent[i];
+
+ if (!INPUT(i)->type)
+ break;
+
+ ent->name = iname[INPUT(i)->type];
+ ent->flags = MEDIA_ENT_FL_CONNECTOR;
+ dev->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
+
+ switch (INPUT(i)->type) {
+ case EM28XX_VMUX_COMPOSITE:
+ ent->function = MEDIA_ENT_F_CONN_COMPOSITE;
+ break;
+ case EM28XX_VMUX_SVIDEO:
+ ent->function = MEDIA_ENT_F_CONN_SVIDEO;
+ break;
+ default: /* EM28XX_VMUX_TELEVISION or EM28XX_RADIO */
+ ent->function = MEDIA_ENT_F_CONN_RF;
+ break;
+ }
+
+ ret = media_entity_pads_init(ent, 1, &dev->input_pad[i]);
+ if (ret < 0)
+ pr_err("failed to initialize input pad[%d]!\n", i);
+
+ ret = media_device_register_entity(dev->media_dev, ent);
+ if (ret < 0)
+ pr_err("failed to register input entity %d!\n", i);
+ }
+#endif
+}
+
+
/* ------------------------------------------------------------------
Videobuf2 operations
------------------------------------------------------------------*/
return sizes[0] < size ? -EINVAL : 0;
*nplanes = 1;
sizes[0] = size;
+
+ em28xx_enable_analog_tuner(dev);
+
return 0;
}
f.type = V4L2_TUNER_ANALOG_TV;
v4l2_device_call_all(&v4l2->v4l2_dev,
0, tuner, s_frequency, &f);
+
+ /* Enable video stream at TV decoder */
+ v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_stream, 1);
}
v4l2->streaming_users++;
res_free(dev, vq->type);
if (v4l2->streaming_users-- == 1) {
+ /* Disable video stream at TV decoder */
+ v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_stream, 0);
+
/* Last active user, so shutdown all the URBS */
em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE);
}
res_free(dev, vq->type);
if (v4l2->streaming_users-- == 1) {
+ /* Disable video stream at TV decoder */
+ v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_stream, 0);
+
/* Last active user, so shutdown all the URBS */
em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE);
}
*width = (((unsigned long)maxw) << 12) / (hscale + 4096L);
*height = (((unsigned long)maxh) << 12) / (vscale + 4096L);
+
+ /* Don't let width or height to be zero */
+ if (*width < 1)
+ *width = 1;
+ if (*height < 1)
+ *height = 1;
}
/* ------------------------------------------------------------------
v4l_bound_align_image(&width, 48, maxw, 1, &height, 32, maxh,
1, 0);
}
+ /* Avoid division by zero at size_to_scale */
+ if (width < 1)
+ width = 1;
+ if (height < 1)
+ height = 1;
size_to_scale(dev, width, height, &hscale, &vscale);
scale_to_size(dev, hscale, vscale, &width, &height);
0, video, s_parm, p);
}
-static const char *iname[] = {
- [EM28XX_VMUX_COMPOSITE1] = "Composite1",
- [EM28XX_VMUX_COMPOSITE2] = "Composite2",
- [EM28XX_VMUX_COMPOSITE3] = "Composite3",
- [EM28XX_VMUX_COMPOSITE4] = "Composite4",
- [EM28XX_VMUX_SVIDEO] = "S-Video",
- [EM28XX_VMUX_TELEVISION] = "Television",
- [EM28XX_VMUX_CABLE] = "Cable TV",
- [EM28XX_VMUX_DVB] = "DVB",
- [EM28XX_VMUX_DEBUG] = "for debug only",
-};
-
static int vidioc_enum_input(struct file *file, void *priv,
struct v4l2_input *i)
{
strcpy(i->name, iname[INPUT(n)->type]);
- if ((EM28XX_VMUX_TELEVISION == INPUT(n)->type) ||
- (EM28XX_VMUX_CABLE == INPUT(n)->type))
+ if ((EM28XX_VMUX_TELEVISION == INPUT(n)->type))
i->type = V4L2_INPUT_TYPE_TUNER;
i->std = dev->v4l2->vdev.tvnorms;
em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE);
+ em28xx_v4l2_media_release(dev);
+
if (video_is_registered(&v4l2->radio_dev)) {
em28xx_info("V4L2 device %s deregistered\n",
video_device_node_name(&v4l2->radio_dev));
v4l2->dev = dev;
dev->v4l2 = v4l2;
+#ifdef CONFIG_MEDIA_CONTROLLER
+ v4l2->v4l2_dev.mdev = dev->media_dev;
+#endif
ret = v4l2_device_register(&dev->udev->dev, &v4l2->v4l2_dev);
if (ret < 0) {
em28xx_errdev("Call to v4l2_device_register() failed!\n");
video_device_node_name(&v4l2->radio_dev));
}
+ /* Init entities at the Media Controller */
+ em28xx_v4l2_create_entities(dev);
+
+ ret = em28xx_v4l2_create_media_graph(dev);
+ if (ret) {
+ em28xx_errdev("failed to create media graph\n");
+ em28xx_v4l2_media_release(dev);
+ goto unregister_dev;
+ }
+
em28xx_info("V4L2 video device registered as %s\n",
video_device_node_name(&v4l2->vdev));
return 0;
unregister_dev:
+ if (video_is_registered(&v4l2->radio_dev)) {
+ em28xx_info("V4L2 device %s deregistered\n",
+ video_device_node_name(&v4l2->radio_dev));
+ video_unregister_device(&v4l2->radio_dev);
+ }
+ if (video_is_registered(&v4l2->vbi_dev)) {
+ em28xx_info("V4L2 device %s deregistered\n",
+ video_device_node_name(&v4l2->vbi_dev));
+ video_unregister_device(&v4l2->vbi_dev);
+ }
+ if (video_is_registered(&v4l2->vdev)) {
+ em28xx_info("V4L2 device %s deregistered\n",
+ video_device_node_name(&v4l2->vdev));
+ video_unregister_device(&v4l2->vdev);
+ }
+
v4l2_ctrl_handler_free(&v4l2->ctrl_handler);
v4l2_device_unregister(&v4l2->v4l2_dev);
err:
#ifndef _EM28XX_H
#define _EM28XX_H
-#define EM28XX_VERSION "0.2.1"
+#define EM28XX_VERSION "0.2.2"
#define DRIVER_DESC "Empia em28xx device driver"
#include <linux/workqueue.h>
#define MAX_EM28XX_INPUT 4
enum enum28xx_itype {
- EM28XX_VMUX_COMPOSITE1 = 1,
- EM28XX_VMUX_COMPOSITE2,
- EM28XX_VMUX_COMPOSITE3,
- EM28XX_VMUX_COMPOSITE4,
+ EM28XX_VMUX_COMPOSITE = 1,
EM28XX_VMUX_SVIDEO,
EM28XX_VMUX_TELEVISION,
- EM28XX_VMUX_CABLE,
- EM28XX_VMUX_DVB,
- EM28XX_VMUX_DEBUG,
EM28XX_RADIO,
};
bool top_field;
int vbi_read;
unsigned int field_count;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct media_pad video_pad, vbi_pad;
+ struct media_entity *decoder;
+#endif
};
struct em28xx_audio {
/* Snapshot button input device */
char snapshot_button_path[30]; /* path of the input dev */
struct input_dev *sbutton_input_dev;
+
+#ifdef CONFIG_MEDIA_CONTROLLER
+ struct media_device *media_dev;
+ struct media_entity input_ent[MAX_EM28XX_INPUT];
+ struct media_pad input_pad[MAX_EM28XX_INPUT];
+#endif
};
#define kref_to_dev(d) container_of(d, struct em28xx, ref)
struct i2c_adapter i2c_adapter;
/* HPI driver */
- struct go7007_hpi_ops *hpi_ops;
+ const struct go7007_hpi_ops *hpi_ops;
void *hpi_context;
int interrupt_available;
wait_queue_head_t interrupt_waitq;
kfree(go->hpi_context);
}
-static struct go7007_hpi_ops go7007_usb_ezusb_hpi_ops = {
+static const struct go7007_hpi_ops go7007_usb_ezusb_hpi_ops = {
.interface_reset = go7007_usb_interface_reset,
.write_interrupt = go7007_usb_ezusb_write_interrupt,
.read_interrupt = go7007_usb_read_interrupt,
.release = go7007_usb_release,
};
-static struct go7007_hpi_ops go7007_usb_onboard_hpi_ops = {
+static const struct go7007_hpi_ops go7007_usb_onboard_hpi_ops = {
.interface_reset = go7007_usb_interface_reset,
.write_interrupt = go7007_usb_onboard_write_interrupt,
.read_interrupt = go7007_usb_read_interrupt,
struct hdpvr_device *dev;
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
+#if IS_ENABLED(CONFIG_I2C)
struct i2c_client *client;
+#endif
size_t buffer_size;
int i;
int retval = -ENOMEM;
}
if (wait_event_interruptible(dev->wait_data,
- buf->status == BUFSTAT_READY)) {
- ret = -ERESTARTSYS;
- goto err;
- }
+ buf->status == BUFSTAT_READY))
+ return -ERESTARTSYS;
}
if (buf->status != BUFSTAT_READY)
goto err;
ret = msi2500_ctrl_msg(dev, CMD_WREG, reg3);
- if (ret)
- goto err;
err:
return ret;
}
{ USB_DEVICE(0x0471, 0x0312) },
{ USB_DEVICE(0x0471, 0x0313) }, /* the 'new' 720K */
{ USB_DEVICE(0x0471, 0x0329) }, /* Philips SPC 900NC PC Camera */
+ { USB_DEVICE(0x0471, 0x032C) }, /* Philips SPC 880NC PC Camera */
{ USB_DEVICE(0x069A, 0x0001) }, /* Askey */
{ USB_DEVICE(0x046D, 0x08B0) }, /* Logitech QuickCam Pro 3000 */
{ USB_DEVICE(0x046D, 0x08B1) }, /* Logitech QuickCam Notebook Pro */
name = "Philips SPC 900NC webcam";
type_id = 740;
break;
+ case 0x032C:
+ PWC_INFO("Philips SPC 880NC USB webcam detected.\n");
+ name = "Philips SPC 880NC webcam";
+ type_id = 740;
+ break;
default:
return -ENODEV;
break;
buf->vb.sequence = dev->sequence++;
buf->vb.field = V4L2_FIELD_INTERLACED;
- buf->vb.vb2_buf.planes[0].bytesused = buf->bytesused;
buf->vb.vb2_buf.timestamp = ktime_get_ns();
vb2_set_plane_payload(&buf->vb.vb2_buf, 0, buf->bytesused);
usbtv_chunk_to_vbuf(frame, &chunk[1], chunk_no, odd);
usbtv->chunks_done++;
- /* Last chunk in a frame, signalling an end */
- if (odd && chunk_no == usbtv->n_chunks-1) {
- int size = vb2_plane_size(&buf->vb.vb2_buf, 0);
- enum vb2_buffer_state state = usbtv->chunks_done ==
- usbtv->n_chunks ?
- VB2_BUF_STATE_DONE :
- VB2_BUF_STATE_ERROR;
-
- buf->vb.field = V4L2_FIELD_INTERLACED;
- buf->vb.sequence = usbtv->sequence++;
- buf->vb.vb2_buf.timestamp = ktime_get_ns();
- vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
- vb2_buffer_done(&buf->vb.vb2_buf, state);
- list_del(&buf->list);
+ /* Last chunk in a field */
+ if (chunk_no == usbtv->n_chunks-1) {
+ /* Last chunk in a frame, signalling an end */
+ if (odd && !usbtv->last_odd) {
+ int size = vb2_plane_size(&buf->vb.vb2_buf, 0);
+ enum vb2_buffer_state state = usbtv->chunks_done ==
+ usbtv->n_chunks ?
+ VB2_BUF_STATE_DONE :
+ VB2_BUF_STATE_ERROR;
+
+ buf->vb.field = V4L2_FIELD_INTERLACED;
+ buf->vb.sequence = usbtv->sequence++;
+ buf->vb.vb2_buf.timestamp = ktime_get_ns();
+ vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
+ vb2_buffer_done(&buf->vb.vb2_buf, state);
+ list_del(&buf->list);
+ }
+ usbtv->last_odd = odd;
}
spin_unlock_irqrestore(&usbtv->buflock, flags);
ip->transfer_flags = URB_ISO_ASAP;
ip->transfer_buffer = kzalloc(size * USBTV_ISOC_PACKETS,
GFP_KERNEL);
+ if (!ip->transfer_buffer) {
+ usb_free_urb(ip);
+ return NULL;
+ }
ip->complete = usbtv_iso_cb;
ip->number_of_packets = USBTV_ISOC_PACKETS;
ip->transfer_buffer_length = size * USBTV_ISOC_PACKETS;
if (usbtv->udev == NULL)
return -ENODEV;
+ usbtv->last_odd = 1;
usbtv->sequence = 0;
return usbtv_start(usbtv);
}
int width, height;
int n_chunks;
int iso_size;
+ int last_odd;
unsigned int sequence;
struct urb *isoc_urbs[USBTV_ISOC_TRANSFERS];
static inline struct usb_usbvision *cd_to_usbvision(struct device *cd)
{
- struct video_device *vdev =
- container_of(cd, struct video_device, dev);
+ struct video_device *vdev = to_video_device(cd);
return video_get_drvdata(vdev);
}
static ssize_t show_model(struct device *cd,
struct device_attribute *attr, char *buf)
{
- struct video_device *vdev =
- container_of(cd, struct video_device, dev);
+ struct video_device *vdev = to_video_device(cd);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n",
usbvision_device_data[usbvision->dev_model].model_string);
static ssize_t show_hue(struct device *cd,
struct device_attribute *attr, char *buf)
{
- struct video_device *vdev =
- container_of(cd, struct video_device, dev);
+ struct video_device *vdev = to_video_device(cd);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_HUE;
static ssize_t show_contrast(struct device *cd,
struct device_attribute *attr, char *buf)
{
- struct video_device *vdev =
- container_of(cd, struct video_device, dev);
+ struct video_device *vdev = to_video_device(cd);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_CONTRAST;
static ssize_t show_brightness(struct device *cd,
struct device_attribute *attr, char *buf)
{
- struct video_device *vdev =
- container_of(cd, struct video_device, dev);
+ struct video_device *vdev = to_video_device(cd);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_BRIGHTNESS;
static ssize_t show_saturation(struct device *cd,
struct device_attribute *attr, char *buf)
{
- struct video_device *vdev =
- container_of(cd, struct video_device, dev);
+ struct video_device *vdev = to_video_device(cd);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
struct v4l2_control ctrl;
ctrl.id = V4L2_CID_SATURATION;
static ssize_t show_streaming(struct device *cd,
struct device_attribute *attr, char *buf)
{
- struct video_device *vdev =
- container_of(cd, struct video_device, dev);
+ struct video_device *vdev = to_video_device(cd);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n",
YES_NO(usbvision->streaming == stream_on ? 1 : 0));
static ssize_t show_compression(struct device *cd,
struct device_attribute *attr, char *buf)
{
- struct video_device *vdev =
- container_of(cd, struct video_device, dev);
+ struct video_device *vdev = to_video_device(cd);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%s\n",
YES_NO(usbvision->isoc_mode == ISOC_MODE_COMPRESS));
static ssize_t show_device_bridge(struct device *cd,
struct device_attribute *attr, char *buf)
{
- struct video_device *vdev =
- container_of(cd, struct video_device, dev);
+ struct video_device *vdev = to_video_device(cd);
struct usb_usbvision *usbvision = video_get_drvdata(vdev);
return sprintf(buf, "%d\n", usbvision->bridge_type);
}
usbvision_audio_off(usbvision);
usbvision->radio = 0;
usbvision->user--;
+ mutex_unlock(&usbvision->v4l2_lock);
if (usbvision->remove_pending) {
printk(KERN_INFO "%s: Final disconnect\n", __func__);
return 0;
}
- mutex_unlock(&usbvision->v4l2_lock);
PDEBUG(DBG_IO, "success");
return v4l2_fh_release(file);
}
# Used by drivers that need tuner.ko
config VIDEO_TUNER
tristate
- depends on MEDIA_TUNER
# Used by drivers that need v4l2-mem2mem.ko
config V4L2_MEM2MEM_DEV
/* Should be just before return */
register_client:
#if defined(CONFIG_MEDIA_CONTROLLER)
- t->pad[TUNER_PAD_RF_INPUT].flags = MEDIA_PAD_FL_SINK;
- t->pad[TUNER_PAD_IF_OUTPUT].flags = MEDIA_PAD_FL_SOURCE;
- t->sd.entity.function = MEDIA_ENT_F_TUNER;
t->sd.entity.name = t->name;
+ /*
+ * Handle the special case where the tuner has actually
+ * two stages: the PLL to tune into a frequency and the
+ * IF-PLL demodulator (tda988x).
+ */
+ if (t->type == TUNER_TDA9887) {
+ t->pad[IF_VID_DEC_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
+ t->pad[IF_VID_DEC_PAD_OUT].flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(&t->sd.entity,
+ IF_VID_DEC_PAD_NUM_PADS,
+ &t->pad[0]);
+ t->sd.entity.function = MEDIA_ENT_F_IF_VID_DECODER;
+ } else {
+ t->pad[TUNER_PAD_RF_INPUT].flags = MEDIA_PAD_FL_SINK;
+ t->pad[TUNER_PAD_OUTPUT].flags = MEDIA_PAD_FL_SOURCE;
+ t->pad[TUNER_PAD_AUD_OUT].flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(&t->sd.entity, TUNER_NUM_PADS,
+ &t->pad[0]);
+ t->sd.entity.function = MEDIA_ENT_F_TUNER;
+ }
- ret = media_entity_pads_init(&t->sd.entity, TUNER_NUM_PADS, &t->pad[0]);
if (ret < 0) {
tuner_err("failed to initialize media entity!\n");
kfree(t);
- return -ENODEV;
+ return ret;
}
#endif
/* Sets a default mode */
get_user(kp->index, &up->index) ||
get_user(kp->type, &up->type) ||
get_user(kp->flags, &up->flags) ||
- get_user(kp->memory, &up->memory))
+ get_user(kp->memory, &up->memory) ||
+ get_user(kp->length, &up->length))
return -EFAULT;
if (V4L2_TYPE_IS_OUTPUT(kp->type))
return -EFAULT;
if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
- if (get_user(kp->length, &up->length))
- return -EFAULT;
-
num_planes = kp->length;
if (num_planes == 0) {
kp->m.planes = NULL;
} else {
switch (kp->memory) {
case V4L2_MEMORY_MMAP:
- if (get_user(kp->length, &up->length) ||
- get_user(kp->m.offset, &up->m.offset))
+ if (get_user(kp->m.offset, &up->m.offset))
return -EFAULT;
break;
case V4L2_MEMORY_USERPTR:
{
compat_long_t tmp;
- if (get_user(kp->length, &up->length) ||
- get_user(tmp, &up->m.userptr))
+ if (get_user(tmp, &up->m.userptr))
return -EFAULT;
kp->m.userptr = (unsigned long)compat_ptr(tmp);
copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) ||
put_user(kp->sequence, &up->sequence) ||
put_user(kp->reserved2, &up->reserved2) ||
- put_user(kp->reserved, &up->reserved))
+ put_user(kp->reserved, &up->reserved) ||
+ put_user(kp->length, &up->length))
return -EFAULT;
if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) {
} else {
switch (kp->memory) {
case V4L2_MEMORY_MMAP:
- if (put_user(kp->length, &up->length) ||
- put_user(kp->m.offset, &up->m.offset))
+ if (put_user(kp->m.offset, &up->m.offset))
return -EFAULT;
break;
case V4L2_MEMORY_USERPTR:
- if (put_user(kp->length, &up->length) ||
- put_user(kp->m.userptr, &up->m.userptr))
+ if (put_user(kp->m.userptr, &up->m.userptr))
return -EFAULT;
break;
case V4L2_MEMORY_OVERLAY:
bt->width > cap->max_width ||
bt->pixelclock < cap->min_pixelclock ||
bt->pixelclock > cap->max_pixelclock ||
- (cap->standards && bt->standards &&
+ (!(caps & V4L2_DV_BT_CAP_CUSTOM) &&
+ cap->standards && bt->standards &&
!(bt->standards & cap->standards)) ||
(bt->interlaced && !(caps & V4L2_DV_BT_CAP_INTERLACED)) ||
(!bt->interlaced && !(caps & V4L2_DV_BT_CAP_PROGRESSIVE)))
* variable without a low fixed limit. Please use
* v4l2_of_alloc_parse_endpoint() in new drivers instead.
*
- * Return: 0.
+ * Return: 0 on success or a negative error code on failure.
*/
int v4l2_of_parse_endpoint(const struct device_node *node,
struct v4l2_of_endpoint *endpoint)
if (planes[plane].length < vb->planes[plane].min_length) {
dprintk(1, "invalid dmabuf length for plane %d\n",
plane);
+ dma_buf_put(dbuf);
ret = -EINVAL;
goto err;
}
};
/**********************************************************************
- IPIPE API Structures
+* IPIPE API Structures
**********************************************************************/
/* IPIPE module configurations */
return 0;
}
}
- out(LIRC_LP_CONTROL, LP_PSELECP|LP_PINITP);
+ out(LIRC_LP_CONTROL, LP_PSELECP | LP_PINITP);
is_claimed = 1;
return 1;
}
init = 1;
}
- timeout = timer/10; /* timeout after 1/10 sec. */
+ timeout = timer / 10; /* timeout after 1/10 sec. */
signal = 1;
level = lirc_get_timer();
do {
/* adjust value to usecs */
__u64 helper;
- helper = ((__u64) signal)*1000000;
+ helper = ((__u64)signal) * 1000000;
do_div(helper, timer);
- signal = (long) helper;
+ signal = (long)helper;
if (signal > LIRC_SFH506_DELAY)
data = signal - LIRC_SFH506_DELAY;
else
data = 1;
- rbuf_write(PULSE_BIT|data); /* pulse */
+ rbuf_write(PULSE_BIT | data); /* pulse */
}
lastkt = ktime_get();
#else
set_current_state(TASK_INTERRUPTIBLE);
while (count < n) {
if (rptr != wptr) {
- if (copy_to_user(buf+count, &rbuf[rptr],
+ if (copy_to_user(buf + count, &rbuf[rptr],
sizeof(int))) {
result = -EFAULT;
break;
for (i = 0; i < count; i++) {
__u64 helper;
- helper = ((__u64) wbuf[i])*timer;
+ helper = ((__u64)wbuf[i]) * timer;
do_div(helper, 1000000);
- wbuf[i] = (int) helper;
+ wbuf[i] = (int)helper;
}
local_irq_save(flags);
goto exit_device_put;
pport = parport_find_base(io);
- if (pport == NULL) {
+ if (!pport) {
pr_notice("no port at %x found\n", io);
result = -ENXIO;
goto exit_device_put;
pf, kf, lirc_lirc_irq_handler, 0,
NULL);
parport_put_port(pport);
- if (ppdevice == NULL) {
+ if (!ppdevice) {
pr_notice("parport_register_device() failed\n");
result = -ENXIO;
goto exit_device_put;
if (parport_claim(ppdevice) != 0)
goto skip_init;
is_claimed = 1;
- out(LIRC_LP_CONTROL, LP_PSELECP|LP_PINITP);
+ out(LIRC_LP_CONTROL, LP_PSELECP | LP_PINITP);
#ifdef LIRC_TIMER
if (debug)
MODULE_PARM_DESC(irq, "Interrupt (7 or 5)");
module_param(tx_mask, int, S_IRUGO);
-MODULE_PARM_DESC(tx_maxk, "Transmitter mask (default: 0x01)");
+MODULE_PARM_DESC(tx_mask, "Transmitter mask (default: 0x01)");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging messages");
#ifdef __KERNEL__
#include <linux/videodev2.h>
-
-/* Tuner PADs */
-/* FIXME: is this the right place for it? */
-enum tuner_pad_index {
- TUNER_PAD_RF_INPUT,
- TUNER_PAD_IF_OUTPUT,
- TUNER_NUM_PADS
-};
+#include <media/v4l2-mc.h>
#define ADDR_UNSET (255)
--- /dev/null
+/*
+ * v4l2-mc.h - Media Controller V4L2 types and prototypes
+ *
+ * Copyright (C) 2016 Mauro Carvalho Chehab <mchehab@osg.samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/**
+ * enum tuner_pad_index - tuner pad index for MEDIA_ENT_F_TUNER
+ *
+ * @TUNER_PAD_RF_INPUT: Radiofrequency (RF) sink pad, usually linked to a
+ * RF connector entity.
+ * @TUNER_PAD_OUTPUT: Tuner video output source pad. Contains the video
+ * chrominance and luminance or the hole bandwidth
+ * of the signal converted to an Intermediate Frequency
+ * (IF) or to baseband (on zero-IF tuners).
+ * @TUNER_PAD_AUD_OUT: Tuner audio output source pad. Tuners used to decode
+ * analog TV signals have an extra pad for audio output.
+ * Old tuners use an analog stage with a saw filter for
+ * the audio IF frequency. The output of the pad is, in
+ * this case, the audio IF, with should be decoded either
+ * by the bridge chipset (that's the case of cx2388x
+ * chipsets) or may require an external IF sound
+ * processor, like msp34xx. On modern silicon tuners,
+ * the audio IF decoder is usually incorporated at the
+ * tuner. On such case, the output of this pad is an
+ * audio sampled data.
+ * @TUNER_NUM_PADS: Number of pads of the tuner.
+ */
+enum tuner_pad_index {
+ TUNER_PAD_RF_INPUT,
+ TUNER_PAD_OUTPUT,
+ TUNER_PAD_AUD_OUT,
+ TUNER_NUM_PADS
+};
+
+/**
+ * enum if_vid_dec_index - video IF-PLL pad index for
+ * MEDIA_ENT_F_IF_VID_DECODER
+ *
+ * @IF_VID_DEC_PAD_IF_INPUT: video Intermediate Frequency (IF) sink pad
+ * @IF_VID_DEC_PAD_OUT: IF-PLL video output source pad. Contains the
+ * video chrominance and luminance IF signals.
+ * @IF_VID_DEC_PAD_NUM_PADS: Number of pads of the video IF-PLL.
+ */
+enum if_vid_dec_pad_index {
+ IF_VID_DEC_PAD_IF_INPUT,
+ IF_VID_DEC_PAD_OUT,
+ IF_VID_DEC_PAD_NUM_PADS
+};
+
+/**
+ * enum if_aud_dec_index - audio/sound IF-PLL pad index for
+ * MEDIA_ENT_F_IF_AUD_DECODER
+ *
+ * @IF_AUD_DEC_PAD_IF_INPUT: audio Intermediate Frequency (IF) sink pad
+ * @IF_AUD_DEC_PAD_OUT: IF-PLL audio output source pad. Contains the
+ * audio sampled stream data, usually connected
+ * to the bridge bus via an Inter-IC Sound (I2S)
+ * bus.
+ * @IF_AUD_DEC_PAD_NUM_PADS: Number of pads of the audio IF-PLL.
+ */
+enum if_aud_dec_pad_index {
+ IF_AUD_DEC_PAD_IF_INPUT,
+ IF_AUD_DEC_PAD_OUT,
+ IF_AUD_DEC_PAD_NUM_PADS
+};
+
+/**
+ * enum demod_pad_index - analog TV pad index for MEDIA_ENT_F_ATV_DECODER
+ *
+ * @DEMOD_PAD_IF_INPUT: IF input sink pad.
+ * @DEMOD_PAD_VID_OUT: Video output source pad.
+ * @DEMOD_PAD_VBI_OUT: Vertical Blank Interface (VBI) output source pad.
+ * @DEMOD_NUM_PADS: Maximum number of output pads.
+ */
+enum demod_pad_index {
+ DEMOD_PAD_IF_INPUT,
+ DEMOD_PAD_VID_OUT,
+ DEMOD_PAD_VBI_OUT,
+ DEMOD_NUM_PADS
+};
#define MEDIA_ENT_F_IO_VBI (MEDIA_ENT_F_BASE + 32)
#define MEDIA_ENT_F_IO_SWRADIO (MEDIA_ENT_F_BASE + 33)
+/*
+ * Analog TV IF-PLL decoders
+ *
+ * It is a responsibility of the master/bridge drivers to create links
+ * for MEDIA_ENT_F_IF_VID_DECODER and MEDIA_ENT_F_IF_AUD_DECODER.
+ */
+#define MEDIA_ENT_F_IF_VID_DECODER (MEDIA_ENT_F_BASE + 41)
+#define MEDIA_ENT_F_IF_AUD_DECODER (MEDIA_ENT_F_BASE + 42)
+
/*
* Don't touch on those. The ranges MEDIA_ENT_F_OLD_BASE and
* MEDIA_ENT_F_OLD_SUBDEV_BASE are kept to keep backward compatibility
#define MEDIA_ENT_F_LENS (MEDIA_ENT_F_OLD_SUBDEV_BASE + 3)
#define MEDIA_ENT_F_ATV_DECODER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 4)
/*
- * It is a responsibility of the entity drivers to add connectors and links
- * for the tuner entities.
+ * It is a responsibility of the master/bridge drivers to add connectors
+ * and links for MEDIA_ENT_F_TUNER. Please notice that some old tuners
+ * may require the usage of separate I2C chips to decode analog TV signals,
+ * when the master/bridge chipset doesn't have its own TV standard decoder.
+ * On such cases, the IF-PLL staging is mapped via one or two entities:
+ * MEDIA_ENT_F_IF_VID_DECODER and/or MEDIA_ENT_F_IF_AUD_DECODER.
*/
#define MEDIA_ENT_F_TUNER (MEDIA_ENT_F_OLD_SUBDEV_BASE + 5)
* later, before the adding this API upstream.
*/
-#if 0 /* Let's postpone it to Kernel 4.6 */
+
struct media_v2_entity {
__u32 id;
char name[64]; /* FIXME: move to a property? (RFC says so) */
{
return (void __user *)(uintptr_t)arg;
}
-#endif
/* ioctls */
#define MEDIA_IOC_ENUM_ENTITIES _IOWR('|', 0x01, struct media_entity_desc)
#define MEDIA_IOC_ENUM_LINKS _IOWR('|', 0x02, struct media_links_enum)
#define MEDIA_IOC_SETUP_LINK _IOWR('|', 0x03, struct media_link_desc)
-
-#if 0 /* Let's postpone it to Kernel 4.6 */
#define MEDIA_IOC_G_TOPOLOGY _IOWR('|', 0x04, struct media_v2_topology)
-#endif
#endif /* __LINUX_MEDIA_H */
* Copyright (C) 2012 Nokia Corporation
* Contact: Sakari Ailus <sakari.ailus@iki.fi>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
+ * Alternatively you can redistribute this file under the terms of the
+ * BSD license as stated below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. The names of its contributors may not be used to endorse or promote
+ * products derived from this software without specific prior written
+ * permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/