]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
powerpc/83xx: add kmcoge5ne board support
authorHolger Brunck <holger.brunck@keymile.com>
Wed, 21 Mar 2012 12:42:46 +0000 (13:42 +0100)
committerKim Phillips <kim.phillips@freescale.com>
Fri, 15 Jun 2012 22:12:40 +0000 (17:12 -0500)
This board is a MPC8360 board. Two flashes are present
a NOR flash were u-boot and the u-boot environment is stored
and a NAND flash for the application code. This board has 512MB
SDRAM.

Additionaly we introduce a common km8360.h file and convert kmeter1 to
use this.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Christian Herzig <christian.herzig@keymile.com>
cc: Kim Phillips <kim.phillips@freescale.com>
cc: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Gerlando Falauto <gerlando.falauto@keymile.com>
cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
MAINTAINERS
board/keymile/km83xx/km83xx.c
boards.cfg
include/configs/km/km83xx-common.h
include/configs/km8360.h [new file with mode: 0644]
include/configs/kmeter1.h [deleted file]

index 17befd0a7958738ac44196024741191d1b80d371..252c7bf39113dd4ea5f9edbe0e405522f268cc50 100644 (file)
@@ -66,6 +66,10 @@ Oliver Brown <obrown@adventnetworks.com>
 
        gw8260          MPC8260
 
+Holger Brunck <holger.brunck@keymile.com>
+
+       kmcoge5ne       MPC8360
+
 Cyril Chemparathy <cyril@ti.com>
 
        tnetv107x_evm   tnetv107x
index c3a05e6e2c5715b7d4403f8b3a0eeab7a6c26682..1043ccd9a779d58ff3b90051f520fe84fb2a0024 100644 (file)
@@ -32,7 +32,7 @@
 
 const qe_iop_conf_t qe_iop_conf_tab[] = {
        /* port pin dir open_drain assign */
-#if defined(CONFIG_KMETER1)
+#if defined(CONFIG_MPC8360)
        /* MDIO */
        {0,  1, 3, 0, 2}, /* MDIO */
        {0,  2, 1, 0, 1}, /* MDC */
index f58a5c509c5e4e958269e9d8ae966f13d3562d85..a723f67eb1432fb02aa14959d8cbede9d07759ab 100644 (file)
@@ -606,7 +606,8 @@ MPC8360ERDK_66               powerpc     mpc83xx     mpc8360erdk         freesca
 MPC837XEMDS                  powerpc     mpc83xx     mpc837xemds         freescale      -           MPC837XEMDS
 MPC837XEMDS_HOST             powerpc     mpc83xx     mpc837xemds         freescale      -           MPC837XEMDS:PCI
 MPC837XERDB                  powerpc     mpc83xx     mpc837xerdb         freescale
-kmeter1                      powerpc     mpc83xx     km83xx              keymile
+kmcoge5ne                    powerpc     mpc83xx     km83xx              keymile        -           km8360:KMCOGE5NE
+kmeter1                      powerpc     mpc83xx     km83xx              keymile        -           km8360:KMETER1
 MERGERBOX                    powerpc     mpc83xx     mergerbox           matrix_vision
 MVBLM7                       powerpc     mpc83xx     mvblm7              matrix_vision
 SIMPC8313_LP                 powerpc     mpc83xx     simpc8313           sheldon        -           SIMPC8313:NAND_LP
index 2c266fae10e66636cb66094647d10397402492e2..877d8418c0a36049c696e96c139c0d41bd346072 100644 (file)
@@ -54,6 +54,8 @@
  */
 #define CONFIG_SYS_DDR_BASE            0x00000000 /* DDR is system memory */
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_SDRAM_BASE2 (CONFIG_SYS_SDRAM_BASE + 0x10000000) /* +256M */
+
 #define CONFIG_SYS_DDR_SDRAM_BASE      CONFIG_SYS_DDR_BASE
 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL  (DDR_SDRAM_CLK_CNTL_SS_EN | \
                                        DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
diff --git a/include/configs/km8360.h b/include/configs/km8360.h
new file mode 100644 (file)
index 0000000..230b054
--- /dev/null
@@ -0,0 +1,281 @@
+/*
+ * (C) Copyright 2012
+ * Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com>
+ * Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* KMBEC FPGA (PRIO) */
+#define CONFIG_SYS_KMBEC_FPGA_BASE     0xE8000000
+#define CONFIG_SYS_KMBEC_FPGA_SIZE     64
+
+#if defined CONFIG_KMETER1
+#define CONFIG_HOSTNAME                kmeter1
+#define CONFIG_KM_BOARD_NAME   "kmeter1"
+#define CONFIG_KM_DEF_NETDEV   "netdev=eth2\0"
+#elif defined CONFIG_KMCOGE5NE
+#define CONFIG_HOSTNAME                kmcoge5ne
+#define CONFIG_KM_BOARD_NAME   "kmcoge5ne"
+#define CONFIG_KM_DEF_NETDEV   "netdev=eth1\0"
+#define CONFIG_CMD_NAND
+#define CONFIG_NAND_KMETER1
+#define CONFIG_SYS_MAX_NAND_DEVICE             1
+#define NAND_MAX_CHIPS                         1
+#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
+
+#define CONFIG_KM_UBI_PARTITION_NAME_BOOT      "ubi0"
+#define CONFIG_KM_UBI_PARTITION_NAME_APP       "ubi1"
+#define MTDIDS_DEFAULT                 "nor0=boot,nand0=app"
+
+#define MTDPARTS_DEFAULT               "mtdparts="                     \
+       "boot:"                                                         \
+               "768k(u-boot),"                                         \
+               "128k(env),"                                            \
+               "128k(envred),"                                         \
+               "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"             \
+       "app:"                                                          \
+               "-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
+#else
+#error ("Board not supported")
+#endif
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_QE                      /* Has QE */
+#define CONFIG_MPC8360                 /* MPC8360 CPU specific */
+
+#define        CONFIG_SYS_TEXT_BASE    0xF0000000
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km/km83xx-common.h"
+
+/*
+ * System IO Setup
+ */
+#define CONFIG_SYS_SICRH               (SICRH_UC1EOBI | SICRH_UC2E1OBI)
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+       HRCWL_CSB_TO_CLKIN_4X1 | \
+       HRCWL_CORE_TO_CSB_2X1 | \
+       HRCWL_CE_PLL_VCO_DIV_2 | \
+       HRCWL_CE_TO_PLL_1X6)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+       HRCWH_CORE_ENABLE | \
+       HRCWH_FROM_0X00000100 | \
+       HRCWH_BOOTSEQ_DISABLE | \
+       HRCWH_SW_WATCHDOG_DISABLE | \
+       HRCWH_ROM_LOC_LOCAL_16BIT | \
+       HRCWH_BIG_ENDIAN | \
+       HRCWH_LALE_EARLY | \
+       HRCWH_LDP_CLEAR)
+
+/**
+ * DDR RAM settings
+ */
+#define CONFIG_SYS_DDR_SDRAM_CFG (\
+       SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+       SDRAM_CFG_SREN | \
+       SDRAM_CFG_HSE)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2      0x00401000
+
+#ifdef CONFIG_KMCOGE5NE
+/**
+ * KMCOGE5NE has 512 MB RAM
+ */
+#define CONFIG_SYS_DDR_CS0_CONFIG (\
+       CSCONFIG_EN | \
+       CSCONFIG_AP | \
+       CSCONFIG_ODT_RD_ONLY_CURRENT | \
+       CSCONFIG_BANK_BIT_3 | \
+       CSCONFIG_ROW_BIT_13 | \
+       CSCONFIG_COL_BIT_10)
+#else
+#define CONFIG_SYS_DDR_CS0_CONFIG      (CSCONFIG_EN | CSCONFIG_AP | \
+                                        CSCONFIG_ROW_BIT_13 | \
+                                        CSCONFIG_COL_BIT_10 | \
+                                        CSCONFIG_ODT_RD_ONLY_CURRENT)
+#endif
+
+#define CONFIG_SYS_DDR_CLK_CNTL (\
+       DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+
+#define CONFIG_SYS_DDR_INTERVAL (\
+       (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+       (0x203 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_BNDS                        0x0000007f
+
+#define CONFIG_SYS_DDRCDR (\
+       DDRCDR_EN | \
+       DDRCDR_Q_DRN)
+#define CONFIG_SYS_DDR_MODE            0x47860452
+#define CONFIG_SYS_DDR_MODE2           0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0 (\
+       (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+       (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+       (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+       (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+       (0 << TIMING_CFG0_WWT_SHIFT) | \
+       (0 << TIMING_CFG0_RRT_SHIFT) | \
+       (0 << TIMING_CFG0_WRT_SHIFT) | \
+       (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1        ((TIMING_CFG1_CASLAT_50) | \
+                                (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+                                (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+                                (3 << TIMING_CFG1_WRREC_SHIFT) | \
+                                (7 << TIMING_CFG1_REFREC_SHIFT) | \
+                                (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+                                (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+                                (3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2 (\
+       (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+       (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+       (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+       (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+       (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+       (5 << TIMING_CFG2_CPO_SHIFT) | \
+       (0 << TIMING_CFG2_ADD_LAT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3                        0x00000000
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP           LCRR_DBYP
+#define CONFIG_SYS_LCRR_EADC           LCRR_EADC_2
+#define CONFIG_SYS_LCRR_CLKDIV         LCRR_CLKDIV_4
+
+/*
+ * PAXE on the local bus CS3
+ */
+#define CONFIG_SYS_PAXE_BASE           0xA0000000
+#define CONFIG_SYS_PAXE_SIZE           256
+
+#define CONFIG_SYS_LBLAWBAR3_PRELIM    CONFIG_SYS_PAXE_BASE
+
+#define CONFIG_SYS_LBLAWAR3_PRELIM     0x8000001C /* 512MB window size */
+
+#define CONFIG_SYS_BR3_PRELIM (\
+       CONFIG_SYS_PAXE_BASE | \
+       (1 << BR_PS_SHIFT) | \
+       BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM (\
+       MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
+       OR_GPCM_CSNT | \
+       OR_GPCM_ACS_DIV2 | \
+       OR_GPCM_SCY_2 | \
+       OR_GPCM_TRLX | \
+       OR_GPCM_EAD)
+
+#ifdef CONFIG_KMCOGE5NE
+/*
+ * BFTIC3 on the local bus CS4
+ */
+#define CONFIG_SYS_BFTIC3_BASE                 0xB0000000
+#define CONFIG_SYS_BFTIC3_SIZE                 256
+
+#define CONFIG_SYS_BR4_PRELIM (\
+       CONFIG_SYS_BFTIC3_BASE |\
+       (1 << BR_PS_SHIFT) | \
+       BR_V)
+
+#define CONFIG_SYS_OR4_PRELIM (\
+       MEG_TO_AM(CONFIG_SYS_BFTIC3_SIZE) |\
+       OR_GPCM_CSNT | \
+       OR_GPCM_ACS_DIV2 |\
+       OR_GPCM_SCY_2 |\
+       OR_GPCM_TRLX |\
+       OR_GPCM_EAD)
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* PAXE:  icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT5L (\
+       CONFIG_SYS_PAXE_BASE | \
+       BATL_PP_10 | \
+       BATL_MEMCOHERENCE)
+
+#define CONFIG_SYS_IBAT5U (\
+       CONFIG_SYS_PAXE_BASE | \
+       BATU_BL_256M | \
+       BATU_VS | \
+       BATU_VP)
+
+#define CONFIG_SYS_DBAT5L (\
+       CONFIG_SYS_PAXE_BASE | \
+       BATL_PP_10 | \
+       BATL_CACHEINHIBIT | \
+       BATL_GUARDEDSTORAGE)
+
+#define CONFIG_SYS_DBAT5U      CONFIG_SYS_IBAT5U
+
+
+#ifdef CONFIG_KMCOGE5NE
+/* BFTIC3:  icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT6L (\
+       CONFIG_SYS_BFTIC3_BASE | \
+       BATL_PP_10 | \
+       BATL_MEMCOHERENCE)
+
+#define CONFIG_SYS_IBAT6U (\
+       CONFIG_SYS_BFTIC3_BASE | \
+       BATU_BL_256M | \
+       BATU_VS | \
+       BATU_VP)
+
+#define CONFIG_SYS_DBAT6L (\
+       CONFIG_SYS_BFTIC3_BASE | \
+       BATL_PP_10 | \
+       BATL_CACHEINHIBIT | \
+       BATL_GUARDEDSTORAGE)
+
+#define CONFIG_SYS_DBAT6U      CONFIG_SYS_IBAT6U
+
+/* DDR/LBC SDRAM next 256M: cacheable */
+#define CONFIG_SYS_IBAT7L (\
+       CONFIG_SYS_SDRAM_BASE2 |\
+       BATL_PP_10 |\
+       BATL_CACHEINHIBIT |\
+       BATL_GUARDEDSTORAGE)
+
+#define CONFIG_SYS_IBAT7U (\
+       CONFIG_SYS_SDRAM_BASE2 |\
+       BATU_BL_256M |\
+       BATU_VS |\
+       BATU_VP)
+#else
+#define CONFIG_SYS_IBAT6L      (0)
+#define CONFIG_SYS_IBAT6U      (0)
+#define CONFIG_SYS_IBAT7L      (0)
+#define CONFIG_SYS_IBAT7U      (0)
+#define CONFIG_SYS_DBAT6L      CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U      CONFIG_SYS_IBAT6U
+#endif
+
+#define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
+
+#endif /* CONFIG */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
deleted file mode 100644 (file)
index f816da2..0000000
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *                    Dave Liu <daveliu@freescale.com>
- *
- * Copyright (C) 2007 Logic Product Development, Inc.
- *                    Peter Barada <peterb@logicpd.com>
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- *                    Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * (C) Copyright 2008-2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_QE              /* Has QE */
-#define CONFIG_MPC8360         /* MPC8360 CPU specific */
-#define CONFIG_KMETER1         /* KMETER1 board specific */
-#define CONFIG_HOSTNAME                kmeter1
-#define CONFIG_KM_BOARD_NAME   "kmeter1"
-
-#define        CONFIG_SYS_TEXT_BASE    0xF0000000
-#define CONFIG_KM_DEF_NETDEV   \
-       "netdev=eth2\0"         \
-
-/* include common defines/options for all 83xx Keymile boards */
-#include "km/km83xx-common.h"
-
-#define CONFIG_MISC_INIT_R
-/*
- * System IO Setup
- */
-#define CONFIG_SYS_SICRH               (SICRH_UC1EOBI | SICRH_UC2E1OBI)
-
-/*
- * Hardware Reset Configuration Word
- */
-#define CONFIG_SYS_HRCW_LOW (\
-       HRCWL_CSB_TO_CLKIN_4X1 | \
-       HRCWL_CORE_TO_CSB_2X1 | \
-       HRCWL_CE_PLL_VCO_DIV_2 | \
-       HRCWL_CE_TO_PLL_1X6)
-
-#define CONFIG_SYS_HRCW_HIGH (\
-       HRCWH_CORE_ENABLE | \
-       HRCWH_FROM_0X00000100 | \
-       HRCWH_BOOTSEQ_DISABLE | \
-       HRCWH_SW_WATCHDOG_DISABLE | \
-       HRCWH_ROM_LOC_LOCAL_16BIT | \
-       HRCWH_BIG_ENDIAN | \
-       HRCWH_LALE_EARLY | \
-       HRCWH_LDP_CLEAR)
-
-#define CONFIG_SYS_DDR_CS0_BNDS                0x0000007f
-#define CONFIG_SYS_DDR_SDRAM_CFG       (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
-                                        SDRAM_CFG_SREN)
-#define CONFIG_SYS_DDR_SDRAM_CFG2      0x00401000
-#define CONFIG_SYS_DDR_CLK_CNTL        (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#define CONFIG_SYS_DDR_INTERVAL        ((0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
-                                (0x3cf << SDRAM_INTERVAL_REFINT_SHIFT))
-
-#define CONFIG_SYS_DDR_CS0_CONFIG      (CSCONFIG_EN | CSCONFIG_AP | \
-                                        CSCONFIG_ROW_BIT_13 | \
-                                        CSCONFIG_COL_BIT_10 | \
-                                        CSCONFIG_ODT_WR_ONLY_CURRENT)
-
-#define        CONFIG_SYS_DDRCDR               (DDRCDR_EN | DDRCDR_Q_DRN)
-                                       /* 0x40000001 */
-#define CONFIG_SYS_DDR_MODE            0x47860452
-#define CONFIG_SYS_DDR_MODE2           0x8080c000
-
-#define CONFIG_SYS_DDR_TIMING_0        ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
-                                (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
-                                (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
-                                (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
-                                (0 << TIMING_CFG0_WWT_SHIFT) | \
-                                (0 << TIMING_CFG0_RRT_SHIFT) | \
-                                (0 << TIMING_CFG0_WRT_SHIFT) | \
-                                (0 << TIMING_CFG0_RWT_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_1        ((TIMING_CFG1_CASLAT_50) | \
-                                (2 << TIMING_CFG1_WRTORD_SHIFT) | \
-                                (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
-                                (3 << TIMING_CFG1_WRREC_SHIFT) | \
-                                (7 << TIMING_CFG1_REFREC_SHIFT) | \
-                                (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
-                                (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
-                                (3 << TIMING_CFG1_PRETOACT_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_2        ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
-                                (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
-                                (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
-                                (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
-                                (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
-                                (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
-                                (5 << TIMING_CFG2_CPO_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_3        0x00000000
-
-/* PRIO FPGA */
-#define        CONFIG_SYS_KMBEC_FPGA_BASE      0xE8000000
-#define        CONFIG_SYS_KMBEC_FPGA_SIZE      128
-/* PAXE FPGA */
-#define        CONFIG_SYS_PAXE_BASE            0xA0000000
-#define        CONFIG_SYS_PAXE_SIZE            512
-
-/* EEprom support */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
-#define CONFIG_SYS_LCRR_EADC   LCRR_EADC_2
-#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
-
-/*
- * Init Local Bus Memory Controller:
- *
- * Bank Bus     Machine PortSz  Size  Device
- * ---- ---     ------- ------  -----  ------
- *  3   Local   GPCM     8 bit  512MB PAXE
- *
- */
-
-/*
- * PAXE on the local bus CS3
- */
-#define CONFIG_SYS_LBLAWBAR3_PRELIM    CONFIG_SYS_PAXE_BASE
-#define CONFIG_SYS_LBLAWAR3_PRELIM     (LBLAWAR_EN | LBLAWAR_512MB)
-
-#define CONFIG_SYS_BR3_PRELIM  (CONFIG_SYS_PAXE_BASE | \
-                               BR_PS_8 | /* 8 bit port size */ \
-                               BR_MS_GPCM | /* MSEL = GPCM */ \
-                               BR_V)
-#define CONFIG_SYS_OR3_PRELIM  (MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
-                               OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
-                               OR_GPCM_SCY_2 | \
-                               OR_GPCM_TRLX_SET | OR_GPCM_EAD)
-
-/*
- * MMU Setup
- */
-
-/* PAXE:  icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT5L      (CONFIG_SYS_PAXE_BASE | BATL_PP_RW | \
-                                BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT5U      (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | \
-                                BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT5L      (CONFIG_SYS_PAXE_BASE | BATL_PP_RW | \
-                                BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT5U      CONFIG_SYS_IBAT5U
-#define CONFIG_SYS_IBAT6L      (0)
-#define CONFIG_SYS_IBAT6U      (0)
-#define CONFIG_SYS_IBAT7L      (0)
-#define CONFIG_SYS_IBAT7U      (0)
-#define CONFIG_SYS_DBAT6L      CONFIG_SYS_IBAT6L
-#define CONFIG_SYS_DBAT6U      CONFIG_SYS_IBAT6U
-#define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
-
-#endif /* __CONFIG_H */