.endr
ARM( mov r0, r0 )
ARM( b 1f )
- THUMB( adr r12, BSYM(1f) )
+ THUMB( badr r12, 1f )
THUMB( bx r12 )
.word _magic_sig @ Magic numbers to help the loader
bl cache_clean_flush
- adr r0, BSYM(restart)
+ badr r0, restart
add r0, r0, r6
mov pc, r0
ENTRY(mcpm_entry_point)
ARM_BE8(setend be)
- THUMB( adr r12, BSYM(1f) )
+ THUMB( badr r12, 1f )
THUMB( bx r12 )
THUMB( .thumb )
1:
restore_irqs_notrace \oldcpsr
.endm
+/*
+ * Assembly version of "adr rd, BSYM(sym)". This should only be used to
+ * reference local symbols in the same assembly file which are to be
+ * resolved by the assembler. Other usage is undefined.
+ */
+ .irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
+ .macro badr\c, rd, sym
+#ifdef CONFIG_THUMB2_KERNEL
+ adr\c \rd, \sym + 1
+#else
+ adr\c \rd, \sym
+#endif
+ .endm
+ .endr
+
/*
* Get current thread_info.
*/
THUMB( orr \reg , \reg , #PSR_T_BIT )
bne 1f
orr \reg, \reg, #PSR_A_BIT
- adr lr, BSYM(2f)
+ badr lr, 2f
msr spsr_cxsf, \reg
__MSR_ELR_HYP(14)
__ERET
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
@
- adrne lr, BSYM(1b)
+ badrne lr, 1b
bne asm_do_IRQ
#ifdef CONFIG_SMP
ALT_SMP(test_for_ipi r0, r2, r6, lr)
ALT_UP_B(9997f)
movne r1, sp
- adrne lr, BSYM(1b)
+ badrne lr, 1b
bne do_IPI
#endif
9997:
#define THUMB(x...) x
#ifdef __ASSEMBLY__
#define W(instr) instr.w
-#define BSYM(sym) sym + 1
#else
#define WASM(instr) #instr ".w"
#endif
#define THUMB(x...)
#ifdef __ASSEMBLY__
#define W(instr) instr
-#define BSYM(sym) sym
#else
#define WASM(instr) #instr
#endif
#ifdef CONFIG_MULTI_IRQ_HANDLER
ldr r1, =handle_arch_irq
mov r0, sp
- adr lr, BSYM(9997f)
+ badr lr, 9997f
ldr pc, [r1]
#else
arch_irq_handler_default
str r4, [sp, #S_PC]
orr r0, r9, r0, lsl #16
#endif
- adr r9, BSYM(__und_svc_finish)
+ badr r9, __und_svc_finish
mov r2, r4
bl call_fpe
@ instruction, or the more conventional lr if we are to treat
@ this as a real undefined instruction
@
- adr r9, BSYM(ret_from_exception)
+ badr r9, ret_from_exception
@ IRQs must be enabled before attempting to read the instruction from
@ user space since that could cause a page/translation fault if the
@ r2 = PC value for the following instruction (:= regs->ARM_pc)
@ r4 = PC value for the faulting instruction
@ lr = 32-bit undefined instruction function
- adr lr, BSYM(__und_usr_fault_32)
+ badr lr, __und_usr_fault_32
b call_fpe
__und_usr_thumb:
add r2, r2, #2 @ r2 is PC + 2, make it PC + 4
str r2, [sp, #S_PC] @ it's a 2x16bit instr, update
orr r0, r0, r5, lsl #16
- adr lr, BSYM(__und_usr_fault_32)
+ badr lr, __und_usr_fault_32
@ r0 = the two 16-bit Thumb instructions which caused the exception
@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
@ r4 = PC value for the first 16-bit Thumb instruction
__und_usr_fault_16:
mov r1, #2
1: mov r0, sp
- adr lr, BSYM(ret_from_exception)
+ badr lr, ret_from_exception
b __und_fault
ENDPROC(__und_usr_fault_32)
ENDPROC(__und_usr_fault_16)
bl schedule_tail
cmp r5, #0
movne r0, r4
- adrne lr, BSYM(1f)
+ badrne lr, 1f
retne r5
1: get_thread_info tsk
b ret_slow_syscall
bne __sys_trace
cmp scno, #NR_syscalls @ check upper syscall limit
- adr lr, BSYM(ret_fast_syscall) @ return address
+ badr lr, ret_fast_syscall @ return address
ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
add r1, sp, #S_OFF
add r0, sp, #S_OFF
bl syscall_trace_enter
- adr lr, BSYM(__sys_trace_return) @ return address
+ badr lr, __sys_trace_return @ return address
mov scno, r0 @ syscall number (possibly new)
add r1, sp, #S_R0 + S_OFF @ pointer to regs
cmp scno, #NR_syscalls @ check upper syscall limit
1: mcount_get_lr r1 @ lr of instrumented func
mcount_adjust_addr r0, lr @ instrumented function
- adr lr, BSYM(2f)
+ badr lr, 2f
mov pc, r2
2: mcount_exit
.endm
.arm
ENTRY(stext)
- THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM.
+ THUMB( badr r9, 1f ) @ Kernel is always entered in ARM.
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
THUMB( .thumb ) @ switch to Thumb now.
THUMB(1: )
#endif
ldr r13, =__mmap_switched @ address to jump to after
@ initialising sctlr
- adr lr, BSYM(1f) @ return (PIC) address
+ badr lr, 1f @ return (PIC) address
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10
ret r12
bl __setup_mpu @ Initialize the MPU
#endif
- adr lr, BSYM(__after_proc_init) @ return address
+ badr lr, __after_proc_init @ return address
mov r13, r12 @ __secondary_switched address
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10
ENTRY(stext)
ARM_BE8(setend be ) @ ensure we are in BE8 mode
- THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM.
+ THUMB( badr r9, 1f ) @ Kernel is always entered in ARM.
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
THUMB( .thumb ) @ switch to Thumb now.
THUMB(1: )
*/
ldr r13, =__mmap_switched @ address to jump to after
@ mmu has been enabled
- adr lr, BSYM(1f) @ return (PIC) address
+ badr lr, 1f @ return (PIC) address
mov r8, r4 @ set TTBR1 to swapper_pg_dir
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10
.text
ENTRY(secondary_startup_arm)
.arm
- THUMB( adr r9, BSYM(1f) ) @ Kernel is entered in ARM.
+ THUMB( badr r9, 1f ) @ Kernel is entered in ARM.
THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
THUMB( .thumb ) @ switch to Thumb now.
THUMB(1: )
ldr r4, [r7, lr] @ get secondary_data.pgdir
add r7, r7, #4
ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir
- adr lr, BSYM(__enable_mmu) @ return address
+ badr lr, __enable_mmu @ return address
mov r13, r12 @ __secondary_switched address
ldr r12, [r10, #PROCINFO_INITFUNC]
add r12, r12, r10 @ initialise processor
mov r1, r4 @ size of save block
add r0, sp, #8 @ pointer to save block
bl __cpu_suspend_save
- adr lr, BSYM(cpu_suspend_abort)
+ badr lr, cpu_suspend_abort
ldmfd sp!, {r0, pc} @ call suspend fn
ENDPROC(__cpu_suspend)
.ltorg
mov r2, r0
mov r0, r1
- adr lr, BSYM(1f)
+ badr lr, 1f
ret r2
1: ldr lr, [sp]
str r5, [r0, V7M_SCB_SHPR3] @ set PendSV priority
@ SVC to run the kernel in this mode
- adr r1, BSYM(1f)
+ badr r1, 1f
ldr r5, [r12, #11 * 4] @ read the SVC vector entry
str r1, [r12, #11 * 4] @ write the temporary SVC vector entry
mov r6, lr @ save LR
projects / karo-tx-linux.git / commitdiff