# This Kconfig option is used by both PCI and USB drivers
config TTPCI_EEPROM
- tristate
- depends on I2C
- default n
+ tristate
+ depends on I2C
+ default n
source "drivers/media/dvb-core/Kconfig"
If unsure say Y.
+config MEDIA_ATTACH
+ bool
+ depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
+ depends on MODULES
+ default MODULES
+
source "drivers/media/i2c/Kconfig"
source "drivers/media/tuners/Kconfig"
source "drivers/media/dvb-frontends/Kconfig"
goto err_clk;
}
pm_runtime_enable(dev);
- /*
- * Enable only the ISP power domain, keep FIMC-IS clocks off until
- * the whole clock tree is configured. The ISP power domain needs
- * be active in order to acces any CMU_ISP clock registers.
- */
- ret = pm_runtime_get_sync(dev);
- if (ret < 0)
- goto err_irq;
-
- ret = fimc_is_setup_clocks(is);
- pm_runtime_put_sync(dev);
+ ret = pm_runtime_get_sync(dev);
if (ret < 0)
goto err_irq;
- is->clk_init = true;
-
is->alloc_ctx = vb2_dma_contig_init_ctx(dev);
if (IS_ERR(is->alloc_ctx)) {
ret = PTR_ERR(is->alloc_ctx);
if (ret < 0)
goto err_dfs;
+ pm_runtime_put_sync(dev);
+
dev_dbg(dev, "FIMC-IS registered successfully\n");
return 0;
static int fimc_is_runtime_resume(struct device *dev)
{
struct fimc_is *is = dev_get_drvdata(dev);
+ int ret;
- if (!is->clk_init)
- return 0;
+ ret = fimc_is_setup_clocks(is);
+ if (ret)
+ return ret;
return fimc_is_enable_clocks(is);
}
{
struct fimc_is *is = dev_get_drvdata(dev);
- if (is->clk_init)
- fimc_is_disable_clocks(is);
-
+ fimc_is_disable_clocks(is);
return 0;
}
spinlock_t slock;
struct clk *clocks[ISS_CLKS_MAX];
- bool clk_init;
void __iomem *regs;
void __iomem *pmu_regs;
int irq;
s5p-jpeg-objs := jpeg-core.o
-obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) := s5p-jpeg.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg.o
-obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) := s5p-mfc.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc.o
s5p-mfc-y += s5p_mfc.o s5p_mfc_intr.o
s5p-mfc-y += s5p_mfc_dec.o s5p_mfc_enc.o
s5p-mfc-y += s5p_mfc_ctrl.o s5p_mfc_pm.o
-config MEDIA_ATTACH
- bool "Load and attach frontend and tuner driver modules as needed"
- depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
- depends on MODULES
- default y if !EXPERT
- help
- Remove the static dependency of DVB card drivers on all
- frontend modules for all possible card variants. Instead,
- allow the card drivers to only load the frontend modules
- they require.
-
- Also, tuner module will automatically load a tuner driver
- when needed, for analog mode.
-
- This saves several KBytes of memory.
-
- Note: You will need module-init-tools v3.2 or later for this feature.
-
- If unsure say Y.
-
# Analog TV tuners, auto-loaded via tuner.ko
config MEDIA_TUNER
tristate
struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
- struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 5, buf};
+ struct rtl28xxu_req req_r820t = {0x0034, CMD_I2C_RD, 1, buf};
dev_dbg(&d->udev->dev, "%s:\n", __func__);
goto found;
}
- /* check R820T by reading tuner stats at I2C addr 0x1a */
+ /* check R820T ID register; reg=00 val=69 */
ret = rtl28xxu_ctrl_msg(d, &req_r820t);
- if (ret == 0) {
+ if (ret == 0 && buf[0] == 0x69) {
priv->tuner = TUNER_RTL2832_R820T;
priv->tuner_name = "R820T";
goto found;