--- /dev/null
+/*
+ * TPO TD043MTEA1 Panel driver
+ *
+ * Author: Gražvydas Ignotas <notasas@gmail.com>
+ * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+#define TPO_R02_MODE(x) ((x) & 7)
+#define TPO_R02_MODE_800x480 7
+#define TPO_R02_NCLK_RISING BIT(3)
+#define TPO_R02_HSYNC_HIGH BIT(4)
+#define TPO_R02_VSYNC_HIGH BIT(5)
+
+#define TPO_R03_NSTANDBY BIT(0)
+#define TPO_R03_EN_CP_CLK BIT(1)
+#define TPO_R03_EN_VGL_PUMP BIT(2)
+#define TPO_R03_EN_PWM BIT(3)
+#define TPO_R03_DRIVING_CAP_100 BIT(4)
+#define TPO_R03_EN_PRE_CHARGE BIT(6)
+#define TPO_R03_SOFTWARE_CTL BIT(7)
+
+#define TPO_R04_NFLIP_H BIT(0)
+#define TPO_R04_NFLIP_V BIT(1)
+#define TPO_R04_CP_CLK_FREQ_1H BIT(2)
+#define TPO_R04_VGL_FREQ_1H BIT(4)
+
+#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
+ TPO_R03_EN_VGL_PUMP | TPO_R03_EN_PWM | \
+ TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
+ TPO_R03_SOFTWARE_CTL)
+
+#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
+ TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
+
+static const u16 tpo_td043_def_gamma[12] = {
+ 105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
+};
+
+struct panel_drv_data {
+ struct omap_dss_device dssdev;
+ struct omap_dss_device *in;
+
+ struct omap_video_timings videomode;
+
+ int data_lines;
+
+ struct spi_device *spi;
+ struct regulator *vcc_reg;
+ int nreset_gpio;
+ u16 gamma[12];
+ u32 mode;
+ u32 hmirror:1;
+ u32 vmirror:1;
+ u32 powered_on:1;
+ u32 spi_suspended:1;
+ u32 power_on_resume:1;
+};
+
+static const struct omap_video_timings tpo_td043_timings = {
+ .x_res = 800,
+ .y_res = 480,
+
+ .pixel_clock = 36000,
+
+ .hsw = 1,
+ .hfp = 68,
+ .hbp = 214,
+
+ .vsw = 1,
+ .vfp = 39,
+ .vbp = 34,
+
+ .vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+ .hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
+ .data_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+ .de_level = OMAPDSS_SIG_ACTIVE_HIGH,
+ .sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
+{
+ struct spi_message m;
+ struct spi_transfer xfer;
+ u16 w;
+ int r;
+
+ spi_message_init(&m);
+
+ memset(&xfer, 0, sizeof(xfer));
+
+ w = ((u16)addr << 10) | (1 << 8) | data;
+ xfer.tx_buf = &w;
+ xfer.bits_per_word = 16;
+ xfer.len = 2;
+ spi_message_add_tail(&xfer, &m);
+
+ r = spi_sync(spi, &m);
+ if (r < 0)
+ dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
+ return r;
+}
+
+static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
+{
+ u8 i, val;
+
+ /* gamma bits [9:8] */
+ for (val = i = 0; i < 4; i++)
+ val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
+ tpo_td043_write(spi, 0x11, val);
+
+ for (val = i = 0; i < 4; i++)
+ val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
+ tpo_td043_write(spi, 0x12, val);
+
+ for (val = i = 0; i < 4; i++)
+ val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
+ tpo_td043_write(spi, 0x13, val);
+
+ /* gamma bits [7:0] */
+ for (val = i = 0; i < 12; i++)
+ tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
+}
+
+static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
+{
+ u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
+ TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
+ if (h)
+ reg4 &= ~TPO_R04_NFLIP_H;
+ if (v)
+ reg4 &= ~TPO_R04_NFLIP_V;
+
+ return tpo_td043_write(spi, 4, reg4);
+}
+
+static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
+
+ ddata->hmirror = enable;
+ return tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
+ ddata->vmirror);
+}
+
+static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
+
+ return ddata->hmirror;
+}
+
+static ssize_t tpo_td043_vmirror_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
+}
+
+static ssize_t tpo_td043_vmirror_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+ int val;
+ int ret;
+
+ ret = kstrtoint(buf, 0, &val);
+ if (ret < 0)
+ return ret;
+
+ val = !!val;
+
+ ret = tpo_td043_write_mirror(ddata->spi, ddata->hmirror, val);
+ if (ret < 0)
+ return ret;
+
+ ddata->vmirror = val;
+
+ return count;
+}
+
+static ssize_t tpo_td043_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
+}
+
+static ssize_t tpo_td043_mode_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+ long val;
+ int ret;
+
+ ret = kstrtol(buf, 0, &val);
+ if (ret != 0 || val & ~7)
+ return -EINVAL;
+
+ ddata->mode = val;
+
+ val |= TPO_R02_NCLK_RISING;
+ tpo_td043_write(ddata->spi, 2, val);
+
+ return count;
+}
+
+static ssize_t tpo_td043_gamma_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+ ssize_t len = 0;
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
+ ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
+ ddata->gamma[i]);
+ if (ret < 0)
+ return ret;
+ len += ret;
+ }
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static ssize_t tpo_td043_gamma_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+ unsigned int g[12];
+ int ret;
+ int i;
+
+ ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
+ &g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
+ &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
+
+ if (ret != 12)
+ return -EINVAL;
+
+ for (i = 0; i < 12; i++)
+ ddata->gamma[i] = g[i];
+
+ tpo_td043_write_gamma(ddata->spi, ddata->gamma);
+
+ return count;
+}
+
+static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
+ tpo_td043_vmirror_show, tpo_td043_vmirror_store);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
+ tpo_td043_mode_show, tpo_td043_mode_store);
+static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
+ tpo_td043_gamma_show, tpo_td043_gamma_store);
+
+static struct attribute *tpo_td043_attrs[] = {
+ &dev_attr_vmirror.attr,
+ &dev_attr_mode.attr,
+ &dev_attr_gamma.attr,
+ NULL,
+};
+
+static struct attribute_group tpo_td043_attr_group = {
+ .attrs = tpo_td043_attrs,
+};
+
+static int tpo_td043_power_on(struct panel_drv_data *ddata)
+{
+ int r;
+
+ if (ddata->powered_on)
+ return 0;
+
+ r = regulator_enable(ddata->vcc_reg);
+ if (r != 0)
+ return r;
+
+ /* wait for panel to stabilize */
+ msleep(160);
+
+ if (gpio_is_valid(ddata->nreset_gpio))
+ gpio_set_value(ddata->nreset_gpio, 1);
+
+ tpo_td043_write(ddata->spi, 2,
+ TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
+ tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
+ tpo_td043_write(ddata->spi, 0x20, 0xf0);
+ tpo_td043_write(ddata->spi, 0x21, 0xf0);
+ tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
+ ddata->vmirror);
+ tpo_td043_write_gamma(ddata->spi, ddata->gamma);
+
+ ddata->powered_on = 1;
+ return 0;
+}
+
+static void tpo_td043_power_off(struct panel_drv_data *ddata)
+{
+ if (!ddata->powered_on)
+ return;
+
+ tpo_td043_write(ddata->spi, 3,
+ TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
+
+ if (gpio_is_valid(ddata->nreset_gpio))
+ gpio_set_value(ddata->nreset_gpio, 0);
+
+ /* wait for at least 2 vsyncs before cutting off power */
+ msleep(50);
+
+ tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
+
+ regulator_disable(ddata->vcc_reg);
+
+ ddata->powered_on = 0;
+}
+
+static int tpo_td043_connect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (omapdss_device_is_connected(dssdev))
+ return 0;
+
+ r = in->ops.dpi->connect(in, dssdev);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static void tpo_td043_disconnect(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return;
+
+ in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int tpo_td043_enable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+ int r;
+
+ if (!omapdss_device_is_connected(dssdev))
+ return -ENODEV;
+
+ if (omapdss_device_is_enabled(dssdev))
+ return 0;
+
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ in->ops.dpi->set_timings(in, &ddata->videomode);
+
+ r = in->ops.dpi->enable(in);
+ if (r)
+ return r;
+
+ /*
+ * If we are resuming from system suspend, SPI clocks might not be
+ * enabled yet, so we'll program the LCD from SPI PM resume callback.
+ */
+ if (!ddata->spi_suspended) {
+ r = tpo_td043_power_on(ddata);
+ if (r) {
+ in->ops.dpi->disable(in);
+ return r;
+ }
+ }
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ return 0;
+}
+
+static void tpo_td043_disable(struct omap_dss_device *dssdev)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ if (!omapdss_device_is_enabled(dssdev))
+ return;
+
+ in->ops.dpi->disable(in);
+
+ if (!ddata->spi_suspended)
+ tpo_td043_power_off(ddata);
+
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ ddata->videomode = *timings;
+ dssdev->panel.timings = *timings;
+
+ in->ops.dpi->set_timings(in, timings);
+}
+
+static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+ *timings = ddata->videomode;
+}
+
+static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct panel_drv_data *ddata = to_panel_data(dssdev);
+ struct omap_dss_device *in = ddata->in;
+
+ return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver tpo_td043_ops = {
+ .connect = tpo_td043_connect,
+ .disconnect = tpo_td043_disconnect,
+
+ .enable = tpo_td043_enable,
+ .disable = tpo_td043_disable,
+
+ .set_timings = tpo_td043_set_timings,
+ .get_timings = tpo_td043_get_timings,
+ .check_timings = tpo_td043_check_timings,
+
+ .set_mirror = tpo_td043_set_hmirror,
+ .get_mirror = tpo_td043_get_hmirror,
+
+ .get_resolution = omapdss_default_get_resolution,
+};
+
+
+static int tpo_td043_probe_pdata(struct spi_device *spi)
+{
+ const struct panel_tpo_td043mtea1_platform_data *pdata;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *dssdev, *in;
+
+ pdata = dev_get_platdata(&spi->dev);
+
+ ddata->nreset_gpio = pdata->nreset_gpio;
+
+ in = omap_dss_find_output(pdata->source);
+ if (in == NULL) {
+ dev_err(&spi->dev, "failed to find video source '%s'\n",
+ pdata->source);
+ return -EPROBE_DEFER;
+ }
+ ddata->in = in;
+
+ ddata->data_lines = pdata->data_lines;
+
+ dssdev = &ddata->dssdev;
+ dssdev->name = pdata->name;
+
+ return 0;
+}
+
+static int tpo_td043_probe(struct spi_device *spi)
+{
+ struct panel_drv_data *ddata;
+ struct omap_dss_device *dssdev;
+ int r;
+
+ dev_dbg(&spi->dev, "%s\n", __func__);
+
+ spi->bits_per_word = 16;
+ spi->mode = SPI_MODE_0;
+
+ r = spi_setup(spi);
+ if (r < 0) {
+ dev_err(&spi->dev, "spi_setup failed: %d\n", r);
+ return r;
+ }
+
+ ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+ if (ddata == NULL)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, ddata);
+
+ ddata->spi = spi;
+
+ if (dev_get_platdata(&spi->dev)) {
+ r = tpo_td043_probe_pdata(spi);
+ if (r)
+ return r;
+ } else {
+ return -ENODEV;
+ }
+
+ ddata->mode = TPO_R02_MODE_800x480;
+ memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
+
+ ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
+ if (IS_ERR(ddata->vcc_reg)) {
+ dev_err(&spi->dev, "failed to get LCD VCC regulator\n");
+ r = PTR_ERR(ddata->vcc_reg);
+ goto err_regulator;
+ }
+
+ if (gpio_is_valid(ddata->nreset_gpio)) {
+ r = devm_gpio_request_one(&spi->dev,
+ ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
+ "lcd reset");
+ if (r < 0) {
+ dev_err(&spi->dev, "couldn't request reset GPIO\n");
+ goto err_gpio_req;
+ }
+ }
+
+ r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
+ if (r) {
+ dev_err(&spi->dev, "failed to create sysfs files\n");
+ goto err_sysfs;
+ }
+
+ ddata->videomode = tpo_td043_timings;
+
+ dssdev = &ddata->dssdev;
+ dssdev->dev = &spi->dev;
+ dssdev->driver = &tpo_td043_ops;
+ dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+ dssdev->owner = THIS_MODULE;
+ dssdev->panel.timings = ddata->videomode;
+
+ r = omapdss_register_display(dssdev);
+ if (r) {
+ dev_err(&spi->dev, "Failed to register panel\n");
+ goto err_reg;
+ }
+
+ return 0;
+
+err_reg:
+ sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
+err_sysfs:
+err_gpio_req:
+err_regulator:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int tpo_td043_remove(struct spi_device *spi)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *dssdev = &ddata->dssdev;
+ struct omap_dss_device *in = ddata->in;
+
+ dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+ omapdss_unregister_display(dssdev);
+
+ tpo_td043_disable(dssdev);
+ tpo_td043_disconnect(dssdev);
+
+ omap_dss_put_device(in);
+
+ sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tpo_td043_spi_suspend(struct device *dev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
+
+ ddata->power_on_resume = ddata->powered_on;
+ tpo_td043_power_off(ddata);
+ ddata->spi_suspended = 1;
+
+ return 0;
+}
+
+static int tpo_td043_spi_resume(struct device *dev)
+{
+ struct panel_drv_data *ddata = dev_get_drvdata(dev);
+ int ret;
+
+ dev_dbg(dev, "tpo_td043_spi_resume\n");
+
+ if (ddata->power_on_resume) {
+ ret = tpo_td043_power_on(ddata);
+ if (ret)
+ return ret;
+ }
+ ddata->spi_suspended = 0;
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
+ tpo_td043_spi_suspend, tpo_td043_spi_resume);
+
+static struct spi_driver tpo_td043_spi_driver = {
+ .driver = {
+ .name = "panel-tpo-td043mtea1",
+ .owner = THIS_MODULE,
+ .pm = &tpo_td043_spi_pm,
+ },
+ .probe = tpo_td043_probe,
+ .remove = tpo_td043_remove,
+};
+
+module_spi_driver(tpo_td043_spi_driver);
+
+MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
+MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
+MODULE_LICENSE("GPL");
projects / karo-tx-linux.git / commitdiff