--- /dev/null
+Freescale Vybrid Miscellaneous System Control - CPU Configuration
+
+The MSCM IP contains multiple sub modules, this binding describes the first
+block of registers which contains CPU configuration information.
+
+Required properties:
+- compatible: "fsl,vf610-mscm-cpucfg", "syscon"
+- reg: the register range of the MSCM CPU configuration registers
+
+Example:
+ mscm_cpucfg: cpucfg@40001000 {
+ compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+ reg = <0x40001000 0x800>;
+ }
--- /dev/null
+Freescale Vybrid Miscellaneous System Control - Interrupt Router
+
+The MSCM IP contains multiple sub modules, this binding describes the second
+block of registers which control the interrupt router. The interrupt router
+allows to configure the recipient of each peripheral interrupt. Furthermore
+it controls the directed processor interrupts. The module is available in all
+Vybrid SoC's but is only really useful in dual core configurations (VF6xx
+which comes with a Cortex-A5/Cortex-M4 combination).
+
+Required properties:
+- compatible: "fsl,vf610-mscm-ir"
+- reg: the register range of the MSCM Interrupt Router
+- fsl,cpucfg: The handle to the MSCM CPU configuration node, required
+ to get the current CPU ID
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: Two cells, interrupt number and cells.
+ The hardware interrupt number according to interrupt
+ assignment of the interrupt router is required.
+ Flags get passed only when using GIC as parent. Flags
+ encoding as documented by the GIC bindings.
+- interrupt-parent: Should be the phandle for the interrupt controller of
+ the CPU the device tree is intended to be used on. This
+ is either the node of the GIC or NVIC controller.
+
+Example:
+ mscm_ir: interrupt-controller@40001800 {
+ compatible = "fsl,vf610-mscm-ir";
+ reg = <0x40001800 0x400>;
+ fsl,cpucfg = <&mscm_cpucfg>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ }
--- /dev/null
+OMAP Control Module bindings
+
+Control Module contains miscellaneous features under it based on SoC type.
+Pincontrol is one common feature, and it has a specialized support
+described in [1]. Typically some clock nodes are also under control module.
+Syscon is used to share register level access to drivers external to
+control module driver itself.
+
+See [2] for documentation about clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+[2] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible: Must be one of:
+ "ti,am3-scm"
+ "ti,am4-scm"
+ "ti,dm814-scrm"
+ "ti,dm816-scrm"
+ "ti,omap2-scm"
+ "ti,omap3-scm"
+ "ti,omap4-scm-core"
+ "ti,omap4-scm-padconf-core"
+ "ti,omap5-scm-core"
+ "ti,omap5-scm-padconf-core"
+ "ti,dra7-scm-core"
+- reg: Contains Control Module register address range
+ (base address and length)
+
+Optional properties:
+- clocks: clocks for this module
+- clockdomains: clockdomains for this module
+
+Examples:
+
+scm: scm@2000 {
+ compatible = "ti,omap3-scm", "simple-bus";
+ reg = <0x2000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ omap3_pmx_core: pinmux@30 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x230>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x330>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+}
+
+&scm_clocks {
+ mcbsp5_mux_fck: mcbsp5_mux_fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clocks = <&core_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <4>;
+ reg = <0x02d8>;
+ };
+};
--- /dev/null
+L4 interconnect bindings
+
+These bindings describe the OMAP SoCs L4 interconnect bus.
+
+Required properties:
+- compatible : Should be "ti,omap2-l4" for OMAP2 family l4 core bus
+ Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
+ Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
+ Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus
+ Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
+ Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
+ Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
+ Should be "ti,dra7-l4-cfg" for DRA7 family l4 cfg bus
+ Should be "ti,dra7-l4-wkup" for DRA7 family l4 wkup bus
+ Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
+ Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus
+- ranges : contains the IO map range for the bus
+
+Examples:
+
+l4: l4@48000000 {
+ compatible "ti,omap2-l4", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x100000>;
+};
Required properties:
- compatible: Must be one of:
"ti,am3-prcm"
- "ti,am3-scrm"
"ti,am4-prcm"
- "ti,am4-scrm"
"ti,omap2-prcm"
- "ti,omap2-scrm"
"ti,omap3-prm"
"ti,omap3-cm"
- "ti,omap3-scrm"
"ti,omap4-cm1"
"ti,omap4-prm"
"ti,omap4-cm2"
"ti,dra7-prm"
"ti,dra7-cm-core-aon"
"ti,dra7-cm-core"
+ "ti,dm814-prcm"
+ "ti,dm816-prcm"
- reg: Contains PRCM module register address range
(base address and length)
- clocks: clocks for this module
* OMAP OCP2SCP - ocp interface to scp interface
properties:
-- compatible : Should be "ti,omap-ocp2scp"
+- compatible : Should be "ti,am437x-ocp2scp" for AM437x processor
+ Should be "ti,omap-ocp2scp" for all others
- reg : Address and length of the register set for the device
- #address-cells, #size-cells : Must be present if the device has sub-nodes
- ranges : the child address space are mapped 1:1 onto the parent address space
--- /dev/null
+Freescale i.MX General Power Controller
+=======================================
+
+The i.MX6Q General Power Control (GPC) block contains DVFS load tracking
+counters and Power Gating Control (PGC) for the CPU and PU (GPU/VPU) power
+domains.
+
+Required properties:
+- compatible: Should be "fsl,imx6q-gpc" or "fsl,imx6sl-gpc"
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: Should contain GPC interrupt request 1
+- pu-supply: Link to the LDO regulator powering the PU power domain
+- clocks: Clock phandles to devices in the PU power domain that need
+ to be enabled during domain power-up for reset propagation.
+- #power-domain-cells: Should be 1, see below:
+
+The gpc node is a power-controller as documented by the generic power domain
+bindings in Documentation/devicetree/bindings/power/power_domain.txt.
+
+Example:
+
+ gpc: gpc@020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
+ <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ pu-supply = <®_pu>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>,
+ <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_VPU_AXI>;
+ #power-domain-cells = <1>;
+ };
+
+
+Specifying power domain for IP modules
+======================================
+
+IP cores belonging to a power domain should contain a 'power-domains' property
+that is a phandle pointing to the gpc device node and a DOMAIN_INDEX specifying
+the power domain the device belongs to.
+
+Example of a device that is part of the PU power domain:
+
+ vpu: vpu@02040000 {
+ reg = <0x02040000 0x3c000>;
+ /* ... */
+ power-domains = <&gpc 1>;
+ /* ... */
+ };
+
+The following DOMAIN_INDEX values are valid for i.MX6Q:
+ARM_DOMAIN 0
+PU_DOMAIN 1
+The following additional DOMAIN_INDEX value is valid for i.MX6SL:
+DISPLAY_DOMAIN 2
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
S: Maintained
F: arch/arm/*omap*/
+F: arch/arm/configs/omap1_defconfig
+F: arch/arm/configs/omap2plus_defconfig
F: drivers/i2c/busses/i2c-omap.c
F: drivers/irqchip/irq-omap-intc.c
F: drivers/mfd/*omap*.c
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
- imx6sl-evk.dtb
+ imx6sl-evk.dtb \
+ imx6sl-warp.dtb
dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sabreauto.dtb \
+ imx6sx-sdb-reva.dtb \
imx6sx-sdb.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
sys_clkin_ck: sys_clkin_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
};
};
- am33xx_control_module: control_module@4a002000 {
- compatible = "syscon";
- reg = <0x44e10000 0x7fc>;
- };
-
- am33xx_pinmux: pinmux@44e10800 {
- compatible = "pinctrl-single";
- reg = <0x44e10800 0x0238>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x7f>;
- };
-
/*
* XXX: Use a flat representation of the AM33XX interconnect.
* The real AM33XX interconnect network is quite complex. Since
ranges;
ti,hwmods = "l3_main";
- prcm: prcm@44e00000 {
- compatible = "ti,am3-prcm";
- reg = <0x44e00000 0x4000>;
-
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ l4_wkup: l4_wkup@44c00000 {
+ compatible = "ti,am3-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x44c00000 0x280000>;
- prcm_clockdomains: clockdomains {
- };
- };
+ prcm: prcm@200000 {
+ compatible = "ti,am3-prcm";
+ reg = <0x200000 0x4000>;
- scrm: scrm@44e10000 {
- compatible = "ti,am3-scrm";
- reg = <0x44e10000 0x2000>;
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ prcm_clockdomains: clockdomains {
+ };
};
- scrm_clockdomains: clockdomains {
+ scm: scm@210000 {
+ compatible = "ti,am3-scm", "simple-bus";
+ reg = <0x210000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x210000 0x2000>;
+
+ am33xx_pinmux: pinmux@800 {
+ compatible = "pinctrl-single";
+ reg = <0x800 0x238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7f>;
+ };
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
};
};
- cm: syscon@44e10000 {
- compatible = "ti,am33xx-controlmodule", "syscon";
- reg = <0x44e10000 0x800>;
- };
-
intc: interrupt-controller@48200000 {
compatible = "ti,am33xx-intc";
interrupt-controller;
reg = <0x481cc000 0x2000>;
clocks = <&dcan0_fck>;
clock-names = "fck";
- syscon-raminit = <&am33xx_control_module 0x644 0>;
+ syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <52>;
status = "disabled";
};
reg = <0x481d0000 0x2000>;
clocks = <&dcan1_fck>;
clock-names = "fck";
- syscon-raminit = <&am33xx_control_module 0x644 1>;
+ syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <55>;
status = "disabled";
};
*/
interrupts = <40 41 42 43>;
ranges;
- syscon = <&cm>;
+ syscon = <&scm_conf>;
status = "disabled";
davinci_mdio: mdio@4a101000 {
status = "disabled";
reg = <0x5c000000 0x30000>;
interrupts = <67 68 69 70>;
- syscon = <&omap3_scm_general>;
+ syscon = <&scm_conf>;
ti,davinci-ctrl-reg-offset = <0x10000>;
ti,davinci-ctrl-mod-reg-offset = <0>;
ti,davinci-ctrl-ram-offset = <0x20000>;
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
emac_ick: emac_ick {
#clock-cells = <0>;
compatible = "ti,am35xx-gate-clock";
cache-level = <2>;
};
- am43xx_control_module: control_module@4a002000 {
- compatible = "syscon";
- reg = <0x44e10000 0x7f4>;
- };
-
- am43xx_pinmux: pinmux@44e10800 {
- compatible = "ti,am437-padconf", "pinctrl-single";
- reg = <0x44e10800 0x31c>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0xffffffff>;
- };
-
ocp {
compatible = "ti,am4372-l3-noc", "simple-bus";
#address-cells = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- prcm: prcm@44df0000 {
- compatible = "ti,am4-prcm";
- reg = <0x44df0000 0x11000>;
-
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ l4_wkup: l4_wkup@44c00000 {
+ compatible = "ti,am4-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x44c00000 0x287000>;
- prcm_clockdomains: clockdomains {
- };
- };
+ prcm: prcm@1f0000 {
+ compatible = "ti,am4-prcm";
+ reg = <0x1f0000 0x11000>;
- scrm: scrm@44e10000 {
- compatible = "ti,am4-scrm";
- reg = <0x44e10000 0x2000>;
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ prcm_clockdomains: clockdomains {
+ };
};
- scrm_clockdomains: clockdomains {
+ scm: scm@210000 {
+ compatible = "ti,am4-scm", "simple-bus";
+ reg = <0x210000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x210000 0x4000>;
+
+ am43xx_pinmux: pinmux@800 {
+ compatible = "ti,am437-padconf",
+ "pinctrl-single";
+ reg = <0x800 0x31c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
};
};
};
ocp2scp0: ocp2scp@483a8000 {
- compatible = "ti,omap-ocp2scp";
+ compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
};
ocp2scp1: ocp2scp@483e8000 {
- compatible = "ti,omap-ocp2scp";
+ compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&dcan0_fck>;
clock-names = "fck";
reg = <0x481cc000 0x2000>;
- syscon-raminit = <&am43xx_control_module 0x644 0>;
+ syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clocks = <&dcan1_fck>;
clock-names = "fck";
reg = <0x481d0000 0x2000>;
- syscon-raminit = <&am43xx_control_module 0x644 1>;
+ syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
};
- am43xx_pinmux: pinmux@44e10800 {
+ matrix_keypad: matrix_keypad@0 {
+ compatible = "gpio-matrix-keypad";
+ debounce-delay-ms = <5>;
+ col-scan-delay-us = <2>;
+
+ row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
+ &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
+ &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */
+ &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */
+
+ col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */
+ &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */
+ &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
+ &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */
+
+ linux,keymap = <0x00000201 /* P1 */
+ 0x01000204 /* P4 */
+ 0x02000207 /* P7 */
+ 0x0300020a /* NUMERIC_STAR */
+ 0x00010202 /* P2 */
+ 0x01010205 /* P5 */
+ 0x02010208 /* P8 */
+ 0x03010200 /* P0 */
+ 0x00020203 /* P3 */
+ 0x01020206 /* P6 */
+ 0x02020209 /* P9 */
+ 0x0302020b /* NUMERIC_POUND */
+ 0x00030067 /* UP */
+ 0x0103006a /* RIGHT */
+ 0x0203006c /* DOWN */
+ 0x03030069>; /* LEFT */
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+};
+
+&am43xx_pinmux {
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
- };
-
- matrix_keypad: matrix_keypad@0 {
- compatible = "gpio-matrix-keypad";
- debounce-delay-ms = <5>;
- col-scan-delay-us = <2>;
-
- row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH /* Bank0, pin12 */
- &gpio0 13 GPIO_ACTIVE_HIGH /* Bank0, pin13 */
- &gpio0 14 GPIO_ACTIVE_HIGH /* Bank0, pin14 */
- &gpio0 15 GPIO_ACTIVE_HIGH>; /* Bank0, pin15 */
-
- col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH /* Bank3, pin9 */
- &gpio3 10 GPIO_ACTIVE_HIGH /* Bank3, pin10 */
- &gpio2 18 GPIO_ACTIVE_HIGH /* Bank2, pin18 */
- &gpio2 19 GPIO_ACTIVE_HIGH>; /* Bank2, pin19 */
-
- linux,keymap = <0x00000201 /* P1 */
- 0x01000204 /* P4 */
- 0x02000207 /* P7 */
- 0x0300020a /* NUMERIC_STAR */
- 0x00010202 /* P2 */
- 0x01010205 /* P5 */
- 0x02010208 /* P8 */
- 0x03010200 /* P0 */
- 0x00020203 /* P3 */
- 0x01020206 /* P6 */
- 0x02020209 /* P9 */
- 0x0302020b /* NUMERIC_POUND */
- 0x00030067 /* UP */
- 0x0103006a /* RIGHT */
- 0x0203006c /* DOWN */
- 0x03030069>; /* LEFT */
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
- brightness-levels = <0 51 53 56 62 75 101 152 255>;
- default-brightness-level = <8>;
- };
};
&mmc1 {
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
sys_clkin_ck: sys_clkin_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
+ #cooling-cells = <2>;
};
extcon_usb1: extcon_usb1 {
pinctrl-0 = <&tmp102_pins_default>;
interrupt-parent = <&gpio7>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
};
};
&usb2 {
dr_mode = "peripheral";
};
+
+&cpu_trips {
+ cpu_alert1: cpu_alert1 {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+};
+
+&cpu_cooling_maps {
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+};
+
+&thermal_zones {
+ board_thermal: board_thermal {
+ polling-delay-passive = <1250>; /* milliseconds */
+ polling-delay = <1500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&tmp102 0>;
+
+ board_trips: trips {
+ board_alert0: board_alert {
+ temperature = <40000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ board_crit: board_crit {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ board_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&board_alert0>;
+ cooling-device =
+ <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
- prm: prm@4ae06000 {
- compatible = "ti,dra7-prm";
- reg = <0x4ae06000 0x3000>;
- interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ l4_cfg: l4@4a000000 {
+ compatible = "ti,dra7-l4-cfg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x22c000>;
- prm_clocks: clocks {
+ scm: scm@2000 {
+ compatible = "ti,dra7-scm-core", "simple-bus";
+ reg = <0x2000 0x2000>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x1400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0xe00 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+
+ dra7_pmx_core: pinmux@1400 {
+ compatible = "ti,dra7-padconf",
+ "pinctrl-single";
+ reg = <0x1400 0x0464>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x3fffffff>;
+ };
+ };
+
+ cm_core_aon: cm_core_aon@5000 {
+ compatible = "ti,dra7-cm-core-aon";
+ reg = <0x5000 0x2000>;
+
+ cm_core_aon_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_aon_clockdomains: clockdomains {
+ };
+ };
+
+ cm_core: cm_core@8000 {
+ compatible = "ti,dra7-cm-core";
+ reg = <0x8000 0x3000>;
+
+ cm_core_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cm_core_clockdomains: clockdomains {
+ };
};
+ };
- prm_clockdomains: clockdomains {
+ l4_wkup: l4@4ae00000 {
+ compatible = "ti,dra7-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4ae00000 0x3f000>;
+
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x40>;
+ ti,hwmods = "counter_32k";
+ };
+
+ prm: prm@6000 {
+ compatible = "ti,dra7-prm";
+ reg = <0x6000 0x3000>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
};
};
};
};
- cm_core_aon: cm_core_aon@4a005000 {
- compatible = "ti,dra7-cm-core-aon";
- reg = <0x4a005000 0x2000>;
-
- cm_core_aon_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_aon_clockdomains: clockdomains {
- };
- };
-
- cm_core: cm_core@4a008000 {
- compatible = "ti,dra7-cm-core";
- reg = <0x4a008000 0x3000>;
-
- cm_core_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- cm_core_clockdomains: clockdomains {
- };
- };
-
- counter32k: counter@4ae04000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4ae04000 0x40>;
- ti,hwmods = "counter_32k";
+ bandgap: bandgap@4a0021e0 {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c
+ 0x4a002564 0x8
+ 0x4a002574 0x50>;
+ compatible = "ti,dra752-bandgap";
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
};
dra7_ctrl_core: ctrl_core@4a002000 {
reg = <0x4a002e00 0x7c>;
};
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0 0x4>;
- syscon = <&dra7_ctrl_general>;
- pbias_mmc_reg: pbias_mmc_omap5 {
- regulator-name = "pbias_mmc_omap5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
- };
-
- dra7_pmx_core: pinmux@4a003400 {
- compatible = "ti,dra7-padconf", "pinctrl-single";
- reg = <0x4a003400 0x0464>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <32>;
- pinctrl-single,function-mask = <0x3fffffff>;
- };
-
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan1";
reg = <0x4ae3c000 0x2000>;
- syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+ syscon-raminit = <&scm_conf 0x558 0>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&dcan1_sys_clk_mux>;
status = "disabled";
compatible = "ti,dra7-d_can";
ti,hwmods = "dcan2";
reg = <0x48480000 0x2000>;
- syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+ syscon-raminit = <&scm_conf 0x558 1>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sys_clkin1>;
status = "disabled";
};
};
+
+ thermal_zones: thermal-zones {
+ #include "omap4-cpu-thermal.dtsi"
+ #include "omap5-gpu-thermal.dtsi"
+ #include "omap5-core-thermal.dtsi"
+ };
+
+};
+
+&cpu_thermal {
+ polling-delay = <500>; /* milliseconds */
};
/include/ "dra7xx-clocks.dtsi"
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
+
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <2>;
+ #cooling-cells = <2>; /* min followed by max */
};
};
clock-names = "cpu";
clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <2>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
mux-int-port = <1>;
mux-ext-port = <4>;
};
+
+ wvga: display {
+ model = "CLAA057VC01CW";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xfa208b80>;
+ bus-width = <18>;
+ native-mode = <&wvga_timings>;
+ display-timings {
+ wvga_timings: 640x480 {
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <45>;
+ hfront-porch = <114>;
+ hsync-len = <1>;
+ vback-porch = <33>;
+ vfront-porch = <11>;
+ vsync-len = <1>;
+ clock-frequency = <25200000>;
+ };
+ };
+ };
};
&audmux {
>;
};
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX25_PAD_LD0__LD0 0xe0
+ MX25_PAD_LD1__LD1 0xe0
+ MX25_PAD_LD2__LD2 0xe0
+ MX25_PAD_LD3__LD3 0xe0
+ MX25_PAD_LD4__LD4 0xe0
+ MX25_PAD_LD5__LD5 0xe0
+ MX25_PAD_LD6__LD6 0xe0
+ MX25_PAD_LD7__LD7 0xe0
+ MX25_PAD_LD8__LD8 0xe0
+ MX25_PAD_LD9__LD9 0xe0
+ MX25_PAD_LD10__LD10 0xe0
+ MX25_PAD_LD11__LD11 0xe0
+ MX25_PAD_LD12__LD12 0xe0
+ MX25_PAD_LD13__LD13 0xe0
+ MX25_PAD_LD14__LD14 0xe0
+ MX25_PAD_LD15__LD15 0xe0
+ MX25_PAD_GPIO_E__LD16 0xe0
+ MX25_PAD_GPIO_F__LD17 0xe0
+ MX25_PAD_HSYNC__HSYNC 0xe0
+ MX25_PAD_VSYNC__VSYNC 0xe0
+ MX25_PAD_LSCLK__LSCLK 0xe0
+ MX25_PAD_OE_ACD__OE_ACD 0xe0
+ MX25_PAD_CONTRAST__CONTRAST 0xe0
+ >;
+ };
pinctrl_uart1: uart1grp {
fsl,pins = <
};
};
+&lcdc {
+ display = <&wvga>;
+ fsl,lpccr = <0x00a903ff>;
+ fsl,lscr1 = <0x00120300>;
+ fsl,dmacr = <0x00020010>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "okay";
+};
+
&nfc {
nand-on-flash-bbt;
status = "okay";
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
+#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
+
#define MX25_PAD_A10__A10 0x008 0x000 0x000 0x00 0x000
#define MX25_PAD_A10__GPIO_4_0 0x008 0x000 0x000 0x05 0x000
#define MX25_PAD_A13__A13 0x00c 0x22C 0x000 0x00 0x000
#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000
+#define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000
#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000
#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000
+#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x16 0x000
+#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x17 0x000
#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000
#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000
+#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x16 0x000
+#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x17 0x000
#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000
#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000
+#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x16 0x000
+#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x17 0x000
#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000
#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000
+#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x16 0x000
+#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x17 0x000
#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000
#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x16 0x000
#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000
#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__FEC_RX_ER 0x024 0x240 0x518 0x17 0x000
#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000
+#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x16 0x000
+#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000
#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000
#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x16 0x000
#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000
#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000
#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x16 0x000
#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000
#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000
#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000
+#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000
+#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x16 0x000
+#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000
#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000
#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000
+#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x16 0x000
+#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x17 0x000
#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000
#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x16 0x000
#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000
#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000
#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000
#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000
#define MX25_PAD_D15__GPIO_4_5 0x088 0x280 0x000 0x05 0x000
+#define MX25_PAD_D15__SDHC1_DAT7 0x088 0x280 0x4d8 0x06 0x000
#define MX25_PAD_D14__D14 0x08c 0x284 0x000 0x00 0x000
#define MX25_PAD_D14__LD17 0x08c 0x284 0x000 0x01 0x000
#define MX25_PAD_D14__GPIO_4_6 0x08c 0x284 0x000 0x05 0x000
+#define MX25_PAD_D14__SDHC1_DAT6 0x08c 0x284 0x4d4 0x06 0x000
#define MX25_PAD_D13__D13 0x090 0x288 0x000 0x00 0x000
#define MX25_PAD_D13__LD18 0x090 0x288 0x000 0x01 0x000
#define MX25_PAD_D13__GPIO_4_7 0x090 0x288 0x000 0x05 0x000
+#define MX25_PAD_D13__SDHC1_DAT5 0x090 0x288 0x4d0 0x06 0x000
#define MX25_PAD_D12__D12 0x094 0x28c 0x000 0x00 0x000
#define MX25_PAD_D12__GPIO_4_8 0x094 0x28c 0x000 0x05 0x000
+#define MX25_PAD_D12__SDHC1_DAT4 0x094 0x28c 0x4cc 0x06 0x000
#define MX25_PAD_D11__D11 0x098 0x290 0x000 0x00 0x000
#define MX25_PAD_D11__GPIO_4_9 0x098 0x290 0x000 0x05 0x000
+#define MX25_PAD_D11__USBOTG_PWR 0x098 0x290 0x000 0x06 0x000
#define MX25_PAD_D10__D10 0x09c 0x294 0x000 0x00 0x000
#define MX25_PAD_D10__GPIO_4_10 0x09c 0x294 0x000 0x05 0x000
#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000
#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000
+#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000
#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000
#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001
+#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000
#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x10 0x000
-#define MX25_PAD_LD10__FEC_RX_ER 0x0f0 0x2e8 0x518 0x15 0x001
+#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x15 0x001
#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000
#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001
+#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000
#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000
#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001
#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000
#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000
#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000
#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000
#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000
#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001
#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000
#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000
#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000
#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000
#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000
#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000
#define MX25_PAD_CSI_D2__UART5_RXD_MUX 0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000
#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000
#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000
#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000
#define MX25_PAD_CSI_D3__UART5_TXD_MUX 0x124 0x31c 0x000 0x11 0x000
+#define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000
#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000
#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001
#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x10 0x000
#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__SIM1_VEN0 0x128 0x320 0x000 0x04 0x000
#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x15 0x000
#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x17 0x000
#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000
-#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x001
+#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000
+#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000
#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000
#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000
#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000
#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000
#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000
#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000
#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000
#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000
-#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x001
+#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x000
#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000
#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000
#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000
-#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x001
+#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x000
#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000
#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000
#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000
-#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x001
+#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x000
#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001
#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000
#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000
-#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x001
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x000
#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001
#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000
#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000
-#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x001
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x000
#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001
#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000
#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000
-#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x001
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x000
#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001
#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000
#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x13 0x000
#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x15 0x000
-#define MX25_PAD_UART2_CTS__FEC_RX_ER 0x18c 0x384 0x518 0x12 0x002
#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002
#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000
#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000
#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000
#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x15 0x002
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x12 0x002
#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000
#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x10 0x002
+#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x12 0x002
#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x10 0x000
#define MX25_PAD_KPP_ROW2__GPIO_2_31 0x1b0 0x3a8 0x000 0x15 0x000
#define MX25_PAD_KPP_ROW3__KPP_ROW3 0x1b4 0x3ac 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW3__CSI_LD1 0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__CSI_D1 0x1b4 0x3ac 0x48c 0x13 0x002
#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x15 0x000
#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000
#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000
#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_TX but that's wrong.
+ */
+#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000
#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000
#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000
+/*
+ * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
+ * 01/2011) this is CAN1_RX but that's wrong.
+ */
#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000
#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000
#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000
#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000
-#define MX25_PAD_TDO__TDO 0x000 0x3e8 0x000 0x00 0x000
-
#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000
#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000
#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000
#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x11 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x12 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x13 0x001
#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000
#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x12 0x001
#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001
#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000
#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002
#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000
#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000
+#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x16 0x002
#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000
#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000
#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000
+#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x16 0x000
#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000
#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000
#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x10 0x000
#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x14 0x000
#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x15 0x000
+
#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000
#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000
#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000
#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000
+
#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 0x228 0x000 0x000 0x00 0x000
#define MX25_PAD_BOOT_MODE1__GPIO_4_31 0x228 0x000 0x000 0x05 0x000
interrupts = <54>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
fsl,usbmisc = <&usbmisc 1>;
+ dr_mode = "host";
status = "disabled";
};
interrupts = <55>;
clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
- phy-reset-gpios = <&gpio4 13 0>;
+ phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
};
};
};
+
+ can0: can@80032000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&can0_pins_a>;
+ xceiver-supply = <®_can0_vcc>;
+ status = "okay";
+ };
};
apbx@80040000 {
status = "okay";
};
+ auart0: serial@8006a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart0_pins_a>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+ };
+
usbphy0: usbphy@8007c000 {
status = "okay";
};
ahb@80080000 {
usb0: usb@80080000 {
pinctrl-names = "default";
- pinctrl-0 = <&usb0_otg_apf28dev>;
+ pinctrl-0 = <&usb0_otg_apf28dev
+ &usb0_id_pins_b>;
vbus-supply = <®_usb0_vbus>;
status = "okay";
};
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&mac1_pins_a>;
- phy-reset-gpios = <&gpio0 23 0>;
+ phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
gpio = <&gpio1 23 1>;
enable-active-high;
};
+
+ reg_can0_vcc: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "can0_vcc";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
};
leds {
user-button {
label = "User button";
- gpios = <&gpio0 17 0>;
+ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
linux,code = <0x100>;
+ gpio-key,wakeup;
};
};
};
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ spi3_pins_b: spi3@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP3_SCK__SSP3_SCK
+ MX28_PAD_SSP3_MOSI__SSP3_CMD
+ MX28_PAD_SSP3_MISO__SSP3_D0
+ MX28_PAD_SSP3_SS0__SSP3_D3
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
usb0_pins_a: usb0@0 {
reg = <0>;
fsl,pinmux-ids = <
interrupts = <92>;
clocks = <&clks 61>;
fsl,usbphy = <&usbphy1>;
+ dr_mode = "host";
status = "disabled";
};
clocks = <&clks 73>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
+ dr_mode = "host";
status = "disabled";
};
reg = <0x53f80200 0x0200>;
interrupts = <14>;
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+ dr_mode = "host";
status = "disabled";
};
reg = <0x53f80400 0x0200>;
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ dr_mode = "host";
status = "disabled";
};
reg = <0x53f80600 0x0200>;
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+ dr_mode = "host";
status = "disabled";
};
interrupts = <14>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
+ dr_mode = "host";
status = "disabled";
};
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
+ dr_mode = "host";
status = "disabled";
};
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
+ dr_mode = "host";
status = "disabled";
};
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
+ dr_mode = "host";
status = "disabled";
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
+
+&pwm1 {
+ status = "okay";
+};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
+
+&pwm3 {
+ status = "okay";
+};
/*
* Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
* Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
* Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
* Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
* Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
* Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
};
&mipi_dsi {
- port@2 {
- reg = <2>;
+ ports {
+ port@2 {
+ reg = <2>;
- mipi_mux_2: endpoint {
- remote-endpoint = <&ipu2_di0_mipi>;
+ mipi_mux_2: endpoint {
+ remote-endpoint = <&ipu2_di0_mipi>;
+ };
};
- };
- port@3 {
- reg = <3>;
+ port@3 {
+ reg = <3>;
- mipi_mux_3: endpoint {
- remote-endpoint = <&ipu2_di1_mipi>;
+ mipi_mux_3: endpoint {
+ remote-endpoint = <&ipu2_di1_mipi>;
+ };
};
};
};
/*
* Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6qdl-microsom.dtsi"
#include "imx6qdl-microsom-ar8035.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
ir_recv: ir-receiver {
spdif-controller = <&spdif>;
spdif-out;
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pinctrl_gpio_key>;
+ pinctrl-names = "default";
+
+ button_0 {
+ label = "Button 0";
+ gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
};
&hdmi {
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
>;
};
+
+ pinctrl_gpio_key: gpio-key {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x17059
+ >;
+ };
};
};
+&pwm1 {
+ status = "okay";
+};
+
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_spdif>;
/*
* Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6qdl-microsom.dtsi"
#include "imx6qdl-microsom-ar8035.dtsi"
};
};
+ sound-sgtl5000 {
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "On-board Codec";
+ mux-ext-port = <5>;
+ mux-int-port = <1>;
+ ssi-controller = <&ssi1>;
+ };
+
sound-spdif {
compatible = "fsl,imx-audio-spdif";
model = "On-board SPDIF";
};
};
+&audmux {
+ status = "okay";
+};
+
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
-
- /*
- * Not fitted on Carrier-1 board... yet
status = "okay";
+ /* Pro baseboard model */
rtc: pcf8523@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
- */
+
+ /* Pro baseboard model */
+ sgtl5000: sgtl5000@0a {
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+ reg = <0x0a>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ };
};
&i2c2 {
>;
};
+ pinctrl_hummingboard_pwm1: pwm1grp {
+ fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
+ };
+
+ pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+ MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+ MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+ MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+
pinctrl_hummingboard_spdif: hummingboard-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
};
};
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_spdif>;
status = "okay";
};
+&ssi1 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
&usbh1 {
disable-over-current;
vbus-supply = <®_usbh1_vbus>;
*
* This describes the hookup for an AR8035 to the iMX6 on the SolidRun
* MicroSOM.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
&fec {
pinctrl-names = "default";
/*
* Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
&iomuxc {
};
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ max7310_a: gpio@30 {
+ compatible = "maxim,max7310";
+ reg = <0x30>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ max7310_b: gpio@32 {
+ compatible = "maxim,max7310";
+ reg = <0x32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ max7310_c: gpio@34 {
+ compatible = "maxim,max7310";
+ reg = <0x34>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
pinctrl_pwm3: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&intc>;
+ interrupt-parent = <&gpc>;
ranges;
dma_apbh: dma-apbh@00110000 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x00a00600 0x20>;
interrupts = <1 13 0xf01>;
+ interrupt-parent = <&intc>;
clocks = <&clks IMX6QDL_CLK_TWD>;
};
clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_PWM1>;
clock-names = "ipg", "per";
+ status = "disabled";
};
pwm2: pwm@02084000 {
clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_PWM2>;
clock-names = "ipg", "per";
+ status = "disabled";
};
pwm3: pwm@02088000 {
clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_PWM3>;
clock-names = "ipg", "per";
+ status = "disabled";
};
pwm4: pwm@0208c000 {
clocks = <&clks IMX6QDL_CLK_IPG>,
<&clks IMX6QDL_CLK_PWM4>;
clock-names = "ipg", "per";
+ status = "disabled";
};
can1: flexcan@02090000 {
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
- regulator-always-on;
+ regulator-enable-ramp-delay = <150>;
anatop-reg-offset = <0x140>;
anatop-vol-bit-shift = <9>;
anatop-vol-bit-width = <5>;
#size-cells = <1>;
ranges = <0 0x020cc000 0x4000>;
- snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
gpc: gpc@020dc000 {
compatible = "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
<0 90 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ pu-supply = <®_pu>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>,
+ <&clks IMX6QDL_CLK_GPU2D_CORE>,
+ <&clks IMX6QDL_CLK_GPU2D_AXI>,
+ <&clks IMX6QDL_CLK_OPENVG_AXI>,
+ <&clks IMX6QDL_CLK_VPU_AXI>;
+ #power-domain-cells = <1>;
};
gpr: iomuxc-gpr@020e0000 {
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbphy = <&usbphy2>;
fsl,usbmisc = <&usbmisc 1>;
+ dr_mode = "host";
status = "disabled";
};
interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 3>;
+ dr_mode = "host";
status = "disabled";
};
reg = <0x021e0000 0x4000>;
status = "disabled";
- port@0 {
- reg = <0>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
- mipi_mux_0: endpoint {
- remote-endpoint = <&ipu1_di0_mipi>;
+ mipi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_mipi>;
+ };
};
- };
- port@1 {
- reg = <1>;
+ port@1 {
+ reg = <1>;
- mipi_mux_1: endpoint {
- remote-endpoint = <&ipu1_di1_mipi>;
+ mipi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_mipi>;
+ };
};
};
};
--- /dev/null
+/*
+ * Copyright 2014, 2015 O.S. Systems Software LTDA.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6sl.dtsi"
+
+/ {
+ model = "WaRP Board";
+ compatible = "warp,imx6sl-warp", "fsl,imx6sl";
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb_otg1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 0 0>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 2 0>;
+ enable-active-high;
+ };
+
+ reg_1p8v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ usdhc3_pwrseq: usdhc3_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */
+ <&gpio3 25 GPIO_ACTIVE_LOW>, /* BT_REG_ON */
+ <&gpio4 4 GPIO_ACTIVE_LOW>, /* BT_WAKE */
+ <&gpio4 6 GPIO_ACTIVE_LOW>; /* BT_RST_N */
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <4>;
+ non-removable;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ mmc-pwrseq = <&usdhc3_pwrseq>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6sl-warp {
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x41b0b1
+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x41b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SL_PAD_EPDC_D12__UART2_RX_DATA 0x41b0b1
+ MX6SL_PAD_EPDC_D13__UART2_TX_DATA 0x41b0b1
+ MX6SL_PAD_EPDC_D14__UART2_RTS_B 0x4130B1
+ MX6SL_PAD_EPDC_D15__UART2_CTS_B 0x4130B1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6SL_PAD_AUD_RXC__UART3_RX_DATA 0x41b0b1
+ MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x41b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x417059
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x410059
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x417059
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x417059
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x417059
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x417059
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x417059
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x417059
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x417059
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x417059
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170b9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100b9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170b9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170b9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170b9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170b9
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170b9
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170b9
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170b9
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD2_CMD__SD2_CMD 0x4170f9
+ MX6SL_PAD_SD2_CLK__SD2_CLK 0x4100f9
+ MX6SL_PAD_SD2_DAT0__SD2_DATA0 0x4170f9
+ MX6SL_PAD_SD2_DAT1__SD2_DATA1 0x4170f9
+ MX6SL_PAD_SD2_DAT2__SD2_DATA2 0x4170f9
+ MX6SL_PAD_SD2_DAT3__SD2_DATA3 0x4170f9
+ MX6SL_PAD_SD2_DAT4__SD2_DATA4 0x4170f9
+ MX6SL_PAD_SD2_DAT5__SD2_DATA5 0x4170f9
+ MX6SL_PAD_SD2_DAT6__SD2_DATA6 0x4170f9
+ MX6SL_PAD_SD2_DAT7__SD2_DATA7 0x4170f9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x417059
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x410059
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x417059
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x417059
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x417059
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x417059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170b9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100b9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170b9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170b9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170b9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x4170f9
+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x4100f9
+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x4170f9
+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x4170f9
+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x4170f9
+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x4170f9
+ >;
+ };
+ };
+};
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&intc>;
+ interrupt-parent = <&gpc>;
ranges;
ocram: sram@00900000 {
#size-cells = <1>;
ranges = <0 0x020cc000 0x4000>;
- snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
gpc: gpc@020dc000 {
compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
+ pu-supply = <®_pu>;
+ clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+ <&clks IMX6SL_CLK_GPU2D_PODF>;
+ #power-domain-cells = <1>;
};
gpr: iomuxc-gpr@020e0000 {
interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SL_CLK_USBOH3>;
fsl,usbmisc = <&usbmisc 2>;
+ dr_mode = "host";
status = "disabled";
};
--- /dev/null
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "imx6sx-sdb.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloX SDB RevA Board";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pfuze100@08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&qspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi2>;
+ status = "okay";
+
+ flash0: s25fl128s@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s";
+ spi-max-frequency = <66000000>;
+ };
+
+ flash1: s25fl128s@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s";
+ spi-max-frequency = <66000000>;
+ };
+};
/*
- * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6sx.dtsi"
+#include "imx6sx-sdb.dtsi"
/ {
- model = "Freescale i.MX6 SoloX SDB Board";
- compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
-
- chosen {
- stdout-path = &uart1;
- };
-
- memory {
- reg = <0x80000000 0x40000000>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm3 0 5000000>;
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- volume-up {
- label = "Volume Up";
- gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- };
-
- volume-down {
- label = "Volume Down";
- gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vcc_sd3: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_vcc_sd3>;
- regulator-name = "VCC_SD3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usb_otg1_vbus: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg1>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usb_otg2_vbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg2>;
- regulator-name = "usb_otg2_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_psu_5v: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "PSU-5V0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- reg_lcd_3v3: regulator@4 {
- compatible = "regulator-fixed";
- reg = <4>;
- regulator-name = "lcd-3v3";
- gpio = <&gpio3 27 0>;
- enable-active-high;
- };
-
- reg_peri_3v3: regulator@5 {
- compatible = "regulator-fixed";
- reg = <5>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_peri_3v3>;
- regulator-name = "peri_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- regulator-always-on;
- };
-
- reg_enet_3v3: regulator@6 {
- compatible = "regulator-fixed";
- reg = <6>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_3v3>;
- regulator-name = "enet_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
- };
- };
-
- sound {
- compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
- model = "wm8962-audio";
- ssi-controller = <&ssi2>;
- audio-codec = <&codec>;
- audio-routing =
- "Headphone Jack", "HPOUTL",
- "Headphone Jack", "HPOUTR",
- "Ext Spk", "SPKOUTL",
- "Ext Spk", "SPKOUTR",
- "AMIC", "MICBIAS",
- "IN3R", "AMIC";
- mux-int-port = <2>;
- mux-ext-port = <6>;
- };
-};
-
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux>;
- status = "okay";
+ model = "Freescale i.MX6 SoloX SDB RevB Board";
};
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-supply = <®_enet_3v3>;
- phy-mode = "rgmii";
- phy-handle = <ðphy1>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy1: ethernet-phy@1 {
- reg = <1>;
- };
-
- ethphy2: ethernet-phy@2 {
- reg = <2>;
- };
- };
+&cpu0 {
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
};
-&fec2 {
+&i2c1 {
+ clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rgmii";
- phy-handle = <ðphy2>;
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
pmic: pfuze100@08 {
- compatible = "fsl,pfuze100";
+ compatible = "fsl,pfuze200";
reg = <0x08>;
regulators {
regulator-ramp-delay = <6250>;
};
- sw1c_reg: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <6250>;
- };
-
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- sw4_reg: sw4 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
- };
-
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
};
-&i2c4 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c4>;
- status = "okay";
-
- codec: wm8962@1a {
- compatible = "wlf,wm8962";
- reg = <0x1a>;
- clocks = <&clks IMX6SX_CLK_AUDIO>;
- DCVDD-supply = <&vgen4_reg>;
- DBVDD-supply = <&vgen4_reg>;
- AVDD-supply = <&vgen4_reg>;
- CPVDD-supply = <&vgen4_reg>;
- MICVDD-supply = <&vgen3_reg>;
- PLLVDD-supply = <&vgen4_reg>;
- SPKVDD1-supply = <®_psu_5v>;
- SPKVDD2-supply = <®_psu_5v>;
- };
-};
-
-&lcdif1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd>;
- lcd-supply = <®_lcd_3v3>;
- display = <&display0>;
- status = "okay";
-
- display0: display0 {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <89>;
- hfront-porch = <164>;
- vback-porch = <23>;
- vfront-porch = <10>;
- hsync-len = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-};
-
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
- status = "okay";
-};
-
-&snvs_poweroff {
- status = "okay";
-};
-
&qspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi2>;
status = "okay";
- flash0: s25fl128s@0 {
- reg = <0>;
+ flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl128s";
- spi-max-frequency = <66000000>;
+ compatible = "micron,n25q256a";
+ spi-max-frequency = <29000000>;
+ reg = <0>;
};
- flash1: s25fl128s@1 {
- reg = <1>;
+ flash1: n25q256a@1 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,s25fl128s";
- spi-max-frequency = <66000000>;
- };
-};
-
-&ssi2 {
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart5 { /* for bluetooth */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- fsl,uart-has-rtscts;
- status = "okay";
-};
-
-&usbotg1 {
- vbus-supply = <®_usb_otg1_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb_otg1_id>;
- status = "okay";
-};
-
-&usbotg2 {
- vbus-supply = <®_usb_otg2_vbus>;
- dr_mode = "host";
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- non-removable;
- no-1-8-v;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- bus-width = <8>;
- cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
- keep-power-in-suspend;
- enable-sdio-wakeup;
- vmmc-supply = <&vcc_sd3>;
- status = "okay";
-};
-
-&usdhc4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4>;
- cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
- wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&iomuxc {
- imx6x-sdb {
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0
- MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0
- MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0
- MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0
- MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
- >;
- };
-
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
- MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
- MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1
- MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
- MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
- MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
- MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
- MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
- MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
- MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
- MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
- MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
- MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
- MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
- MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
- >;
- };
-
- pinctrl_enet_3v3: enet3v3grp {
- fsl,pins = <
- MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000
- >;
- };
-
- pinctrl_enet2: enet2grp {
- fsl,pins = <
- MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
- MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
- MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
- MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
- MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
- MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
- MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
- MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
- MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
- MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
- MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
- MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
- >;
- };
-
- pinctrl_gpio_keys: gpio_keysgrp {
- fsl,pins = <
- MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
- MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
- MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
- >;
- };
-
- pinctrl_i2c4: i2c4grp {
- fsl,pins = <
- MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
- MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1
- >;
- };
-
- pinctrl_lcd: lcdgrp {
- fsl,pins = <
- MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
- MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
- MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
- MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
- MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
- MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
- MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
- MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
- MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
- MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
- MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
- MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
- MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
- MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
- MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
- MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
- MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
- MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
- MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
- MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
- MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
- MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
- MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
- MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
- MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
- MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
- MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
- MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
- MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
- >;
- };
-
- pinctrl_peri_3v3: peri3v3grp {
- fsl,pins = <
- MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
- >;
- };
-
- pinctrl_pwm3: pwm3grp-1 {
- fsl,pins = <
- MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
- >;
- };
-
- pinctrl_qspi2: qspi2grp {
- fsl,pins = <
- MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1
- MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1
- MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1
- MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1
- MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1
- MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1
- MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1
- MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1
- MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1
- MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1
- MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1
- MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1
- >;
- };
-
- pinctrl_vcc_sd3: vccsd3grp {
- fsl,pins = <
- MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
- MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
- >;
- };
-
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
- MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
- MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
- MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
- >;
- };
-
- pinctrl_usb_otg1: usbotg1grp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
- >;
- };
-
- pinctrl_usb_otg1_id: usbotg1idgrp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
- >;
- };
-
- pinctrl_usb_otg2: usbot2ggrp {
- fsl,pins = <
- MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
- MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
- MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
- MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
- MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
- MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
- MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
- MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
- fsl,pins = <
- MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
- MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
- MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
- MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
- MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
- MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
- MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
- MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
- MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
- MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
- >;
- };
-
- pinctrl_usdhc4: usdhc4grp {
- fsl,pins = <
- MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
- MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
- MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
- MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
- MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
- MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
- MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
- MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
- >;
- };
+ compatible = "micron,n25q256a";
+ spi-max-frequency = <29000000>;
+ reg = <1>;
};
};
--- /dev/null
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Freescale i.MX6 SoloX SDB Board";
+ compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc_sd3: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vcc_sd3>;
+ regulator-name = "VCC_SD3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg2_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg2>;
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_psu_5v: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "PSU-5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_lcd_3v3: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "lcd-3v3";
+ gpio = <&gpio3 27 0>;
+ enable-active-high;
+ };
+
+ reg_peri_3v3: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_peri_3v3>;
+ regulator-name = "peri_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_enet_3v3: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_3v3>;
+ regulator-name = "enet_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
+ model = "wm8962-audio";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "Ext Spk", "SPKOUTL",
+ "Ext Spk", "SPKOUTR",
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
+ mux-int-port = <2>;
+ mux-ext-port = <6>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-supply = <®_enet_3v3>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ codec: wm8962@1a {
+ compatible = "wlf,wm8962";
+ reg = <0x1a>;
+ clocks = <&clks IMX6SX_CLK_AUDIO>;
+ DCVDD-supply = <&vgen4_reg>;
+ DBVDD-supply = <&vgen4_reg>;
+ AVDD-supply = <&vgen4_reg>;
+ CPVDD-supply = <&vgen4_reg>;
+ MICVDD-supply = <&vgen3_reg>;
+ PLLVDD-supply = <&vgen4_reg>;
+ SPKVDD1-supply = <®_psu_5v>;
+ SPKVDD2-supply = <®_psu_5v>;
+ };
+};
+
+&lcdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ lcd-supply = <®_lcd_3v3>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <89>;
+ hfront-porch = <164>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ hsync-len = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&ssi2 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart5 { /* for bluetooth */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ fsl,uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ vmmc-supply = <&vcc_sd3>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6x-sdb {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0
+ MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0
+ MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0
+ MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0
+ MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
+ MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
+ >;
+ };
+
+ pinctrl_enet_3v3: enet3v3grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
+ >;
+ };
+
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059
+ MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1
+ MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+ MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+ MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0
+ MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+ MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+ MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+ >;
+ };
+
+ pinctrl_peri_3v3: peri3v3grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp-1 {
+ fsl,pins = <
+ MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_qspi2: qspi2grp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1
+ MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1
+ MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1
+ MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1
+ MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1
+ MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1
+ MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1
+ MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1
+ MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1
+ MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1
+ MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1
+ MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1
+ >;
+ };
+
+ pinctrl_vcc_sd3: vccsd3grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
+ MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
+ MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
+ MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usb_otg2: usbot2ggrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
+ MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
+ MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
+ MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
+ MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
+ MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
+ MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
+ MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
+ MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
+ MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
+ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
+ >;
+ };
+ };
+};
interrupt-controller;
reg = <0x00a01000 0x1000>,
<0x00a00100 0x100>;
+ interrupt-parent = <&intc>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
- interrupt-parent = <&intc>;
+ interrupt-parent = <&gpc>;
ranges;
pmu {
#size-cells = <1>;
ranges = <0 0x020cc000 0x4000>;
- snvs-rtc-lp@34 {
+ snvs_rtc: snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
gpc: gpc@020dc000 {
compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
reg = <0x020dc000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
};
iomuxc: iomuxc@020e0000 {
fsl,usbmisc = <&usbmisc 2>;
phy_type = "hsic";
fsl,anatop = <&anatop>;
+ dr_mode = "host";
status = "disabled";
};
compatible = "ti,omap2420", "ti,omap2";
ocp {
- prcm: prcm@48008000 {
- compatible = "ti,omap2-prcm";
- reg = <0x48008000 0x1000>;
+ l4: l4@48000000 {
+ compatible = "ti,omap2-l4", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x100000>;
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ prcm: prcm@8000 {
+ compatible = "ti,omap2-prcm";
+ reg = <0x8000 0x1000>;
- prcm_clockdomains: clockdomains {
- };
- };
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- scrm: scrm@48000000 {
- compatible = "ti,omap2-scrm";
- reg = <0x48000000 0x1000>;
+ prcm_clockdomains: clockdomains {
+ };
+ };
- scrm_clocks: clocks {
+ scm: scm@0 {
+ compatible = "ti,omap2-scm", "simple-bus";
+ reg = <0x0 0x1000>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x1000>;
+
+ omap2420_pmx: pinmux@30 {
+ compatible = "ti,omap2420-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x0113>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
};
- scrm_clockdomains: clockdomains {
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x20>;
+ ti,hwmods = "counter_32k";
};
};
- counter32k: counter@48004000 {
- compatible = "ti,omap-counter32k";
- reg = <0x48004000 0x20>;
- ti,hwmods = "counter_32k";
- };
-
- omap2420_pmx: pinmux@48000030 {
- compatible = "ti,omap2420-padconf", "pinctrl-single";
- reg = <0x48000030 0x0113>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-single,register-width = <8>;
- pinctrl-single,function-mask = <0x3f>;
- };
-
gpio1: gpio@48018000 {
compatible = "ti,omap2-gpio";
reg = <0x48018000 0x200>;
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
mcbsp3_mux_fck: mcbsp3_mux_fck {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
- reg = <0x02e8>;
+ reg = <0x78>;
};
mcbsp3_fck: mcbsp3_fck {
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
ti,bit-shift = <2>;
- reg = <0x02e8>;
+ reg = <0x78>;
};
mcbsp4_fck: mcbsp4_fck {
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
ti,bit-shift = <4>;
- reg = <0x02e8>;
+ reg = <0x78>;
};
mcbsp5_fck: mcbsp5_fck {
compatible = "ti,omap2430", "ti,omap2";
ocp {
- prcm: prcm@49006000 {
- compatible = "ti,omap2-prcm";
- reg = <0x49006000 0x1000>;
+ l4_wkup: l4_wkup@49000000 {
+ compatible = "ti,omap2-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x49000000 0x31000>;
- prcm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ prcm: prcm@6000 {
+ compatible = "ti,omap2-prcm";
+ reg = <0x6000 0x1000>;
- prcm_clockdomains: clockdomains {
- };
- };
-
- scrm: scrm@49002000 {
- compatible = "ti,omap2-scrm";
- reg = <0x49002000 0x1000>;
+ prcm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ prcm_clockdomains: clockdomains {
+ };
};
- scrm_clockdomains: clockdomains {
+ scm: scm@2000 {
+ compatible = "ti,omap2-scm", "simple-bus";
+ reg = <0x2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x1000>;
+
+ omap2430_pmx: pinmux@30 {
+ compatible = "ti,omap2430-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x0154>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <8>;
+ pinctrl-single,function-mask = <0x3f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x240>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x230 0x4>;
+ syscon = <&scm_conf>;
+ pbias_mmc_reg: pbias_mmc_omap2430 {
+ regulator-name = "pbias_mmc_omap2430";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
};
- };
-
- counter32k: counter@49020000 {
- compatible = "ti,omap-counter32k";
- reg = <0x49020000 0x20>;
- ti,hwmods = "counter_32k";
- };
-
- omap2430_pmx: pinmux@49002030 {
- compatible = "ti,omap2430-padconf", "pinctrl-single";
- reg = <0x49002030 0x0154>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-single,register-width = <8>;
- pinctrl-single,function-mask = <0x3f>;
- };
-
- omap2_scm_general: tisyscon@49002270 {
- compatible = "syscon";
- reg = <0x49002270 0x240>;
- };
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0x230 0x4>;
- syscon = <&omap2_scm_general>;
- pbias_mmc_reg: pbias_mmc_omap2430 {
- regulator-name = "pbias_mmc_omap2430";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ counter32k: counter@20000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x20000 0x20>;
+ ti,hwmods = "counter_32k";
};
};
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-&scrm_clocks {
+&scm_clocks {
mcbsp1_mux_fck: mcbsp1_mux_fck {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
ti,bit-shift = <2>;
- reg = <0x0274>;
+ reg = <0x4>;
};
mcbsp1_fck: mcbsp1_fck {
compatible = "ti,composite-mux-clock";
clocks = <&func_96m_ck>, <&mcbsp_clks>;
ti,bit-shift = <6>;
- reg = <0x0274>;
+ reg = <0x4>;
};
mcbsp2_fck: mcbsp2_fck {
ranges;
ti,hwmods = "l3_main";
+ l4_core: l4@48000000 {
+ compatible = "ti,omap3-l4-core", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x48000000 0x1000000>;
+
+ scm: scm@2000 {
+ compatible = "ti,omap3-scm", "simple-bus";
+ reg = <0x2000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x2000>;
+
+ omap3_pmx_core: pinmux@30 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0x30 0x238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ scm_conf: scm_conf@270 {
+ compatible = "syscon";
+ reg = <0x270 0x330>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ scm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ scm_clockdomains: clockdomains {
+ };
+
+ omap3_pmx_wkup: pinmux@a00 {
+ compatible = "ti,omap3-padconf",
+ "pinctrl-single";
+ reg = <0xa00 0x5c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+ };
+ };
+
aes: aes@480c5000 {
compatible = "ti,omap3-aes";
ti,hwmods = "aes";
};
};
- scrm: scrm@48002000 {
- compatible = "ti,omap3-scrm";
- reg = <0x48002000 0x2000>;
-
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- scrm_clockdomains: clockdomains {
- };
- };
-
counter32k: counter@48320000 {
compatible = "ti,omap-counter32k";
reg = <0x48320000 0x20>;
dma-requests = <96>;
};
- omap3_pmx_core: pinmux@48002030 {
- compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002030 0x0238>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0xff1f>;
- };
-
- omap3_pmx_wkup: pinmux@48002a00 {
- compatible = "ti,omap3-padconf", "pinctrl-single";
- reg = <0x48002a00 0x5c>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0xff1f>;
- };
-
- omap3_scm_general: tisyscon@48002270 {
- compatible = "syscon";
- reg = <0x48002270 0x2f0>;
- };
-
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
reg = <0x2b0 0x4>;
- syscon = <&omap3_scm_general>;
+ syscon = <&scm_conf>;
pbias_mmc_reg: pbias_mmc_omap2430 {
regulator-name = "pbias_mmc_omap2430";
regulator-min-microvolt = <1800000>;
0x480bd800 0x017c>;
interrupts = <24>;
iommus = <&mmu_isp>;
- syscon = <&omap3_scm_general 0xdc>;
+ syscon = <&scm_conf 0xdc>;
ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
#clock-cells = <1>;
ports {
0x480bd800 0x0600>;
interrupts = <24>;
iommus = <&mmu_isp>;
- syscon = <&omap3_scm_general 0x2f0>;
+ syscon = <&scm_conf 0x2f0>;
ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>;
#clock-cells = <1>;
ports {
clock-div = <1>;
};
};
-&scrm_clocks {
+
+&scm_clocks {
mcbsp5_mux_fck: mcbsp5_mux_fck {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clocks = <&core_96m_fck>, <&mcbsp_clks>;
ti,bit-shift = <4>;
- reg = <0x02d8>;
+ reg = <0x68>;
};
mcbsp5_fck: mcbsp5_fck {
compatible = "ti,composite-mux-clock";
clocks = <&core_96m_fck>, <&mcbsp_clks>;
ti,bit-shift = <2>;
- reg = <0x0274>;
+ reg = <0x04>;
};
mcbsp1_fck: mcbsp1_fck {
compatible = "ti,composite-mux-clock";
clocks = <&per_96m_fck>, <&mcbsp_clks>;
ti,bit-shift = <6>;
- reg = <0x0274>;
+ reg = <0x04>;
};
mcbsp2_fck: mcbsp2_fck {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
clocks = <&per_96m_fck>, <&mcbsp_clks>;
- reg = <0x02d8>;
+ reg = <0x68>;
};
mcbsp3_fck: mcbsp3_fck {
compatible = "ti,composite-mux-clock";
clocks = <&per_96m_fck>, <&mcbsp_clks>;
ti,bit-shift = <2>;
- reg = <0x02d8>;
+ reg = <0x68>;
};
mcbsp4_fck: mcbsp4_fck {
/* sensor ID */
thermal-sensors = <&bandgap 0>;
- trips {
+ cpu_trips: trips {
cpu_alert0: cpu_alert {
temperature = <100000>; /* millicelsius */
hysteresis = <2000>; /* millicelsius */
};
};
- cooling-maps {
+ cpu_cooling_maps: cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- cm1: cm1@4a004000 {
- compatible = "ti,omap4-cm1";
- reg = <0x4a004000 0x2000>;
-
- cm1_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ l4_cfg: l4@4a000000 {
+ compatible = "ti,omap4-l4-cfg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x1000000>;
- cm1_clockdomains: clockdomains {
- };
- };
+ cm1: cm1@4000 {
+ compatible = "ti,omap4-cm1";
+ reg = <0x4000 0x2000>;
- prm: prm@4a306000 {
- compatible = "ti,omap4-prm";
- reg = <0x4a306000 0x3000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ cm1_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- prm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ cm1_clockdomains: clockdomains {
+ };
};
- prm_clockdomains: clockdomains {
- };
- };
+ cm2: cm2@8000 {
+ compatible = "ti,omap4-cm2";
+ reg = <0x8000 0x3000>;
- cm2: cm2@4a008000 {
- compatible = "ti,omap4-cm2";
- reg = <0x4a008000 0x3000>;
+ cm2_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- cm2_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ cm2_clockdomains: clockdomains {
+ };
};
- cm2_clockdomains: clockdomains {
+ omap4_scm_core: scm@2000 {
+ compatible = "ti,omap4-scm-core", "simple-bus";
+ reg = <0x2000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x1000>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
- };
-
- scrm: scrm@4a30a000 {
- compatible = "ti,omap4-scrm";
- reg = <0x4a30a000 0x2000>;
- scrm_clocks: clocks {
+ omap4_padconf_core: scm@100000 {
+ compatible = "ti,omap4-scm-padconf-core",
+ "simple-bus";
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x100000 0x1000>;
+
+ omap4_pmx_core: pinmux@40 {
+ compatible = "ti,omap4-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap4_padconf_global: omap4_padconf_global@5a0 {
+ compatible = "syscon";
+ reg = <0x5a0 0x170>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap4_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap4 {
+ regulator-name = "pbias_mmc_omap4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
};
- scrm_clockdomains: clockdomains {
- };
- };
-
- counter32k: counter@4a304000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4a304000 0x20>;
- ti,hwmods = "counter_32k";
- };
-
- omap4_pmx_core: pinmux@4a100040 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
- reg = <0x4a100040 0x0196>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
- };
- omap4_pmx_wkup: pinmux@4a31e040 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
- reg = <0x4a31e040 0x0038>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
- };
-
- omap4_padconf_global: tisyscon@4a1005a0 {
- compatible = "syscon";
- reg = <0x4a1005a0 0x170>;
- };
-
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0x60 0x4>;
- syscon = <&omap4_padconf_global>;
- pbias_mmc_reg: pbias_mmc_omap4 {
- regulator-name = "pbias_mmc_omap4";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ l4_wkup: l4@300000 {
+ compatible = "ti,omap4-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x300000 0x40000>;
+
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x20>;
+ ti,hwmods = "counter_32k";
+ };
+
+ prm: prm@6000 {
+ compatible = "ti,omap4-prm";
+ reg = <0x6000 0x3000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
+ };
+
+ scrm: scrm@a000 {
+ compatible = "ti,omap4-scrm";
+ reg = <0xa000 0x2000>;
+
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ scrm_clockdomains: clockdomains {
+ };
+ };
+
+ omap4_pmx_wkup: pinmux@1e040 {
+ compatible = "ti,omap4-padconf",
+ "pinctrl-single";
+ reg = <0x1e040 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
};
};
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- prm: prm@4ae06000 {
- compatible = "ti,omap5-prm";
- reg = <0x4ae06000 0x3000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ l4_cfg: l4@4a000000 {
+ compatible = "ti,omap5-l4-cfg", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4a000000 0x22a000>;
- prm_clocks: clocks {
+ scm_core: scm@2000 {
+ compatible = "ti,omap5-scm-core", "simple-bus";
+ reg = <0x2000 0x1000>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x2000 0x800>;
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x800>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
};
- prm_clockdomains: clockdomains {
+ scm_padconf_core: scm@2800 {
+ compatible = "ti,omap5-scm-padconf-core",
+ "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2800 0x800>;
+
+ omap5_pmx_core: pinmux@40 {
+ compatible = "ti,omap5-padconf",
+ "pinctrl-single";
+ reg = <0x40 0x01b6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
+ };
+
+ omap5_padconf_global: omap5_padconf_global@5a0 {
+ compatible = "syscon";
+ reg = <0x5a0 0xec>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pbias_regulator: pbias_regulator {
+ compatible = "ti,pbias-omap";
+ reg = <0x60 0x4>;
+ syscon = <&omap5_padconf_global>;
+ pbias_mmc_reg: pbias_mmc_omap5 {
+ regulator-name = "pbias_mmc_omap5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
};
- };
- cm_core_aon: cm_core_aon@4a004000 {
- compatible = "ti,omap5-cm-core-aon";
- reg = <0x4a004000 0x2000>;
+ cm_core_aon: cm_core_aon@4000 {
+ compatible = "ti,omap5-cm-core-aon";
+ reg = <0x4000 0x2000>;
- cm_core_aon_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ cm_core_aon_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- cm_core_aon_clockdomains: clockdomains {
+ cm_core_aon_clockdomains: clockdomains {
+ };
};
- };
- scrm: scrm@4ae0a000 {
- compatible = "ti,omap5-scrm";
- reg = <0x4ae0a000 0x2000>;
+ cm_core: cm_core@8000 {
+ compatible = "ti,omap5-cm-core";
+ reg = <0x8000 0x3000>;
- scrm_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
- };
+ cm_core_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- scrm_clockdomains: clockdomains {
+ cm_core_clockdomains: clockdomains {
+ };
};
};
- cm_core: cm_core@4a008000 {
- compatible = "ti,omap5-cm-core";
- reg = <0x4a008000 0x3000>;
+ l4_wkup: l4@4ae00000 {
+ compatible = "ti,omap5-l4-wkup", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4ae00000 0x2b000>;
- cm_core_clocks: clocks {
- #address-cells = <1>;
- #size-cells = <0>;
+ counter32k: counter@4000 {
+ compatible = "ti,omap-counter32k";
+ reg = <0x4000 0x40>;
+ ti,hwmods = "counter_32k";
};
- cm_core_clockdomains: clockdomains {
+ prm: prm@6000 {
+ compatible = "ti,omap5-prm";
+ reg = <0x6000 0x3000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+ prm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ prm_clockdomains: clockdomains {
+ };
};
- };
- counter32k: counter@4ae04000 {
- compatible = "ti,omap-counter32k";
- reg = <0x4ae04000 0x40>;
- ti,hwmods = "counter_32k";
- };
+ scrm: scrm@a000 {
+ compatible = "ti,omap5-scrm";
+ reg = <0xa000 0x2000>;
- omap5_pmx_core: pinmux@4a002840 {
- compatible = "ti,omap5-padconf", "pinctrl-single";
- reg = <0x4a002840 0x01b6>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
- };
- omap5_pmx_wkup: pinmux@4ae0c840 {
- compatible = "ti,omap5-padconf", "pinctrl-single";
- reg = <0x4ae0c840 0x0038>;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
- interrupt-controller;
- pinctrl-single,register-width = <16>;
- pinctrl-single,function-mask = <0x7fff>;
- };
+ scrm_clocks: clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
- omap5_padconf_global: tisyscon@4a002da0 {
- compatible = "syscon";
- reg = <0x4A002da0 0xec>;
- };
+ scrm_clockdomains: clockdomains {
+ };
+ };
- pbias_regulator: pbias_regulator {
- compatible = "ti,pbias-omap";
- reg = <0x60 0x4>;
- syscon = <&omap5_padconf_global>;
- pbias_mmc_reg: pbias_mmc_omap5 {
- regulator-name = "pbias_mmc_omap5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ omap5_pmx_wkup: pinmux@c840 {
+ compatible = "ti,omap5-padconf",
+ "pinctrl-single";
+ reg = <0xc840 0x0038>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0x7fff>;
};
};
bootargs = "console=ttyLP0,115200";
};
+ clk16m: clk16m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
status = "okay";
};
+&dspi1 {
+ status = "okay";
+
+ mcp2515can: can@0 {
+ compatible = "microchip,mcp2515";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_int>;
+ reg = <0>;
+ clocks = <&clk16m>;
+ spi-max-frequency = <10000000>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 GPIO_ACTIVE_LOW>;
+ };
+};
+
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
&usbh1 {
vbus-supply = <&usbh_vbus_reg>;
};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_can_int: can_int {
+ fsl,pins = <
+ VF610_PAD_PTB21__GPIO_43 0x22ed
+ >;
+ };
+ };
+};
status = "okay";
};
+&dspi1 {
+ bus-num = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dspi1>;
+};
+
&edma0 {
status = "okay";
};
>;
};
+ pinctrl_dspi1: dspi1grp {
+ fsl,pins = <
+ VF610_PAD_PTD5__DSPI1_CS0 0x33e2
+ VF610_PAD_PTD6__DSPI1_SIN 0x33e1
+ VF610_PAD_PTD7__DSPI1_SOUT 0x33e2
+ VF610_PAD_PTD8__DSPI1_SCK 0x33e2
+ >;
+ };
+
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
};
soc {
- interrupt-parent = <&intc>;
-
aips-bus@40000000 {
intc: interrupt-controller@40002000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
+ interrupt-parent = <&intc>;
reg = <0x40003000 0x1000>,
<0x40002100 0x100>;
};
compatible = "arm,cortex-a9-global-timer";
reg = <0x40002200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc>;
clocks = <&clks VF610_CLK_PLATFORM_BUS>;
};
};
};
};
-&adc0 {
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&adc1 {
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&can0 {
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&can1 {
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&dspi0 {
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&edma0 {
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma-tx", "edma-err";
-};
-
-&edma1 {
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma-tx", "edma-err";
-};
-
-&esdhc1 {
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&fec0 {
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&fec1 {
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&ftm {
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio0 {
- interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio1 {
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio2 {
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio3 {
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&gpio4 {
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&i2c0 {
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&pit {
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&qspi0 {
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sai2 {
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&snvsrtc {
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&src {
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart0 {
- interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart1 {
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart2 {
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart3 {
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart4 {
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&uart5 {
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbdev0 {
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbh1 {
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbphy0 {
- interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbphy1 {
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+&mscm_ir {
+ interrupt-parent = <&intc>;
};
&wdoga5 {
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
status = "okay";
};
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
+ interrupt-parent = <&mscm_ir>;
ranges;
aips0: aips-bus@40000000 {
#size-cells = <1>;
ranges;
+ mscm_cpucfg: cpucfg@40001000 {
+ compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+ reg = <0x40001000 0x800>;
+ };
+
+ mscm_ir: interrupt-controller@40001800 {
+ compatible = "fsl,vf610-mscm-ir";
+ reg = <0x40001800 0x400>;
+ fsl,cpucfg = <&mscm_cpucfg>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
edma0: dma-controller@40018000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
<0x40024000 0x1000>,
<0x40025000 0x1000>;
dma-channels = <32>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX0>,
<&clks VF610_CLK_DMAMUX1>;
can0: flexcan@40020000 {
compatible = "fsl,vf610-flexcan";
reg = <0x40020000 0x4000>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_FLEXCAN0>,
<&clks VF610_CLK_FLEXCAN0>;
clock-names = "ipg", "per";
uart0: serial@40027000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40027000 0x1000>;
+ interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART0>;
clock-names = "ipg";
dmas = <&edma0 0 2>,
uart1: serial@40028000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40028000 0x1000>;
+ interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART1>;
clock-names = "ipg";
dmas = <&edma0 0 4>,
uart2: serial@40029000 {
compatible = "fsl,vf610-lpuart";
reg = <0x40029000 0x1000>;
+ interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART2>;
clock-names = "ipg";
dmas = <&edma0 0 6>,
uart3: serial@4002a000 {
compatible = "fsl,vf610-lpuart";
reg = <0x4002a000 0x1000>;
+ interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART3>;
clock-names = "ipg";
dmas = <&edma0 0 8>,
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
reg = <0x4002c000 0x1000>;
+ interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_DSPI0>;
clock-names = "dspi";
spi-num-chipselects = <5>;
status = "disabled";
};
+ dspi1: dspi1@4002d000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002d000 0x1000>;
+ interrupts = <68 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_DSPI1>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ status = "disabled";
+ };
+
sai2: sai@40031000 {
compatible = "fsl,vf610-sai";
reg = <0x40031000 0x1000>;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SAI2>;
clock-names = "sai";
dma-names = "tx", "rx";
pit: pit@40037000 {
compatible = "fsl,vf610-pit";
reg = <0x40037000 0x1000>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_PIT>;
clock-names = "pit";
};
adc0: adc@4003b000 {
compatible = "fsl,vf610-adc";
reg = <0x4003b000 0x1000>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ADC0>;
clock-names = "adc";
status = "disabled";
wdoga5: wdog@4003e000 {
compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
reg = <0x4003e000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_WDT>;
clock-names = "wdog";
status = "disabled";
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
reg = <0x40044000 0x1000>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_QSPI0_EN>,
<&clks VF610_CLK_QSPI0>;
clock-names = "qspi_en", "qspi";
iomuxc: iomuxc@40048000 {
compatible = "fsl,vf610-iomuxc";
reg = <0x40048000 0x1000>;
- #gpio-range-cells = <3>;
};
gpio0: gpio@40049000 {
reg = <0x40049000 0x1000 0x400ff000 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 0 32>;
reg = <0x4004a000 0x1000 0x400ff040 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <108 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 32 32>;
reg = <0x4004b000 0x1000 0x400ff080 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 64 32>;
reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 96 32>;
reg = <0x4004d000 0x1000 0x400ff100 0x40>;
gpio-controller;
#gpio-cells = <2>;
+ interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&iomuxc 0 128 7>;
usbphy0: usbphy@40050800 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050800 0x400>;
+ interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBPHY0>;
fsl,anatop = <&anatop>;
status = "disabled";
usbphy1: usbphy@40050c00 {
compatible = "fsl,vf610-usbphy";
reg = <0x40050c00 0x400>;
+ interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBPHY1>;
fsl,anatop = <&anatop>;
status = "disabled";
#size-cells = <0>;
compatible = "fsl,vf610-i2c";
reg = <0x40066000 0x1000>;
+ interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_I2C0>;
clock-names = "ipg";
dmas = <&edma0 0 50>,
usbdev0: usb@40034000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x40034000 0x800>;
+ interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC0>;
fsl,usbphy = <&usbphy0>;
fsl,usbmisc = <&usbmisc0 0>;
src: src@4006e000 {
compatible = "fsl,vf610-src", "syscon";
reg = <0x4006e000 0x1000>;
+ interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
};
};
<0x400a1000 0x1000>,
<0x400a2000 0x1000>;
dma-channels = <32>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
clock-names = "dmamux0", "dmamux1";
clocks = <&clks VF610_CLK_DMAMUX2>,
<&clks VF610_CLK_DMAMUX3>;
snvsrtc: snvs-rtc-lp@34 {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
reg = <0x34 0x58>;
+ interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_SNVS>;
clock-names = "snvs-rtc";
};
uart4: serial@400a9000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400a9000 0x1000>;
+ interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART4>;
clock-names = "ipg";
status = "disabled";
uart5: serial@400aa000 {
compatible = "fsl,vf610-lpuart";
reg = <0x400aa000 0x1000>;
+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_UART5>;
clock-names = "ipg";
status = "disabled";
adc1: adc@400bb000 {
compatible = "fsl,vf610-adc";
reg = <0x400bb000 0x1000>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ADC1>;
clock-names = "adc";
status = "disabled";
esdhc1: esdhc@400b2000 {
compatible = "fsl,imx53-esdhc";
reg = <0x400b2000 0x1000>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_IPG_BUS>,
<&clks VF610_CLK_PLATFORM_BUS>,
<&clks VF610_CLK_ESDHC1>;
usbh1: usb@400b4000 {
compatible = "fsl,vf610-usb", "fsl,imx27-usb";
reg = <0x400b4000 0x800>;
+ interrupts = <76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_USBC1>;
fsl,usbphy = <&usbphy1>;
fsl,usbmisc = <&usbmisc1 0>;
ftm: ftm@400b8000 {
compatible = "fsl,ftm-timer";
reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "ftm-evt", "ftm-src",
"ftm-evt-counter-en", "ftm-src-counter-en";
clocks = <&clks VF610_CLK_FTM2>,
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
+ interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET0>,
<&clks VF610_CLK_ENET>;
fec1: ethernet@400d1000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d1000 0x1000>;
+ interrupts = <79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET1>,
<&clks VF610_CLK_ENET>;
can1: flexcan@400d4000 {
compatible = "fsl,vf610-flexcan";
reg = <0x400d4000 0x4000>;
+ interrupts = <59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks VF610_CLK_FLEXCAN1>,
<&clks VF610_CLK_FLEXCAN1>;
clock-names = "ipg", "per";
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX25_3DS=y
CONFIG_MACH_EUKREA_CPUIMX25SD=y
-CONFIG_MACH_IMX25_DT=y
+CONFIG_SOC_IMX25=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_MACH_NETXBIG=y
CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX25_DT=y
+CONFIG_SOC_IMX25=y
CONFIG_MACH_IMX27_DT=y
CONFIG_ARCH_U300=y
CONFIG_PCI_MVEBU=y
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
+ depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
help
The debug board is an integral part of the MXC 3-stack(PDK)
platforms, it can be attached or removed from the peripheral
config HAVE_IMX_GPC
bool
+ select PM_GENERIC_DOMAINS if PM
config HAVE_IMX_MMDC
bool
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
-config SOC_IMX25
- bool
- select ARCH_MXC_IOMUX_V3
- select CPU_ARM926T
- select MXC_AVIC
- select PINCTRL_IMX25
-
config SOC_IMX27
bool
select CPU_ARM926T
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
-comment "MX25 platforms:"
-
-config MACH_MX25_3DS
- bool "Support MX25PDK (3DS) Platform"
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMXDI_RTC
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select SOC_IMX25
-
-config MACH_EUKREA_CPUIMX25SD
- bool "Support Eukrea CPUIMX25 Platform"
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMXDI_RTC
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select USB_ULPI_VIEWPORT if USB_ULPI
- select SOC_IMX25
-
-choice
- prompt "Baseboard"
- depends on MACH_EUKREA_CPUIMX25SD
- default MACH_EUKREA_MBIMXSD25_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD25_BASEBOARD
- bool "Eukrea MBIMXSD development board"
- select IMX_HAVE_PLATFORM_GPIO_KEYS
- select IMX_HAVE_PLATFORM_IMX_SSI
- select IMX_HAVE_PLATFORM_SPI_IMX
- select LEDS_GPIO_REGISTER
- help
- This adds board specific devices that can be found on Eukrea's
- MBIMXSD evaluation board.
-
-endchoice
-
-config MACH_IMX25_DT
- bool "Support i.MX25 platforms from device tree"
- select SOC_IMX25
- help
- Include support for Freescale i.MX25 based platforms
- using the device tree for discovery
-
comment "MX27 platforms:"
config MACH_MX27ADS
endif
+if ARCH_MULTI_V5
+
+comment "Device tree only"
+
+config SOC_IMX25
+ bool "i.MX25 support"
+ select ARCH_MXC_IOMUX_V3
+ select CPU_ARM926T
+ select MXC_AVIC
+ select PINCTRL_IMX25
+ help
+ This enables support for Freescale i.MX25 processor
+endif
+
if ARCH_MULTI_V7
comment "Device tree only"
config SOC_VF610
bool "Vybrid Family VF610 support"
+ select IRQ_DOMAIN_HIERARCHY
select ARM_GIC
select PINCTRL_VF610
select PL310_ERRATA_769419 if CACHE_L2X0
+ select SMP_ON_UP if SMP
help
- This enable support for Freescale Vybrid VF610 processor.
+ This enables support for Freescale Vybrid VF610 processor.
choice
prompt "Clocksource for scheduler clock"
select ZONE_DMA if ARM_LPAE
help
- This enable support for Freescale LS1021A processor.
+ This enables support for Freescale LS1021A processor.
endif
obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
-obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
-# i.MX25 based machines
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
-obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
-
# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
#include "clk.h"
#include "common.h"
#include "hardware.h"
-#include "mx25.h"
#define CCM_MPCTL 0x00
#define CCM_UPCTL 0x04
return 0;
}
-int __init mx25_clocks_init(void)
-{
- void __iomem *ccm;
-
- ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
-
- __mx25_clocks_init(24000000, ccm);
-
- clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
- clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
- /* i.mx25 has the i.mx21 type uart */
- clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
- clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1");
- clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2");
- clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
- clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
- clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
- clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
- clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
- clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
- clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
- clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
- clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
- /* i.mx25 has the i.mx35 type cspi */
- clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
- clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
- clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
- clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
- clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
- clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
- clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
- clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
- clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
- clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
- clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
- clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
- clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
- clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
- clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
- clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
- clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
- clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
- clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
- clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
- clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0");
- clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0");
- clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0");
- clk_register_clkdev(clk[dummy], "audmux", NULL);
- clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
- clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
- /* i.mx25 has the i.mx35 type sdma */
- clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma");
- clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
- clk_register_clkdev(clk[iim_ipg], "iim", NULL);
-
- mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
-
- return 0;
-}
-
static void __init mx25_clocks_init_dt(struct device_node *np)
{
struct device_node *refnp;
static unsigned int share_count_ssi1;
static unsigned int share_count_ssi2;
static unsigned int share_count_ssi3;
+static unsigned int share_count_mipi_core_cfg;
static void __init imx6q_clocks_init(struct device_node *ccm_node)
{
clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2);
clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8);
+ clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20);
if (cpu_is_imx6dl()) {
clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1);
clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1);
clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
- clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
+ clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4);
clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
- clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
+ clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg);
+ clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg);
+ clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg);
if (cpu_is_imx6dl())
/*
* The multiplexer and divider of the imx6q clock gpu2d get
void mx1_map_io(void);
void mx21_map_io(void);
-void mx25_map_io(void);
void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
void imx1_init_early(void);
void imx21_init_early(void);
-void imx25_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
void tzic_init_irq(void);
void mx1_init_irq(void);
void mx21_init_irq(void);
-void mx25_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
void imx1_soc_init(void);
void imx21_soc_init(void);
-void imx25_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
void mxc_timer_init(void __iomem *, int);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
-int mx25_clocks_init(void);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);
void imx_init_revision_from_anatop(void);
struct device *imx_soc_device_init(void);
void imx6_enable_rbc(bool enable);
+void imx_gpc_check_dt(void);
void imx_gpc_set_arm_power_in_lpm(bool power_off);
void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw);
void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw);
static inline void imx_smp_prepare(void) {}
#endif
void imx_src_init(void);
-void imx_gpc_init(void);
void imx_gpc_pre_suspend(bool arm_power_off);
void imx_gpc_post_resume(void);
void imx_gpc_mask_all(void);
*/
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "iim.h"
#include "hardware.h"
static int mx25_read_cpu_rev(void)
{
u32 rev;
+ void __iomem *iim_base;
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
+ iim_base = of_iomap(np, 0);
+ BUG_ON(!iim_base);
+ rev = readl(iim_base + MXC_IIMSREV);
+ iounmap(iim_base);
- rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
switch (rev) {
case 0x00:
return IMX_CHIP_REVISION_1_0;
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx25_fec_data;
-#define imx25_add_fec(pdata) \
- imx_add_fec(&imx25_fec_data, pdata)
-
-extern const struct imx_flexcan_data imx25_flexcan_data[];
-#define imx25_add_flexcan(id) \
- imx_add_flexcan(&imx25_flexcan_data[id])
-#define imx25_add_flexcan0() imx25_add_flexcan(0)
-#define imx25_add_flexcan1() imx25_add_flexcan(1)
-
-extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
-#define imx25_add_fsl_usb2_udc(pdata) \
- imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
-
-extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
-#define imx25_add_imxdi_rtc() \
- imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
-
-extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
-#define imx25_add_imx2_wdt() \
- imx_add_imx2_wdt(&imx25_imx2_wdt_data)
-
-extern const struct imx_imx_fb_data imx25_imx_fb_data;
-#define imx25_add_imx_fb(pdata) \
- imx_add_imx_fb(&imx25_imx_fb_data, pdata)
-
-extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
-#define imx25_add_imx_i2c(id, pdata) \
- imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
-#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
-#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
-#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
-#define imx25_add_imx_keypad(pdata) \
- imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
-
-extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
-#define imx25_add_imx_ssi(id, pdata) \
- imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
-#define imx25_add_imx_uart(id, pdata) \
- imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
-#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
-#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata)
-#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata)
-#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
-#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
-
-extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
-#define imx25_add_mx2_camera(pdata) \
- imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
-
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
-#define imx25_add_mxc_ehci_otg(pdata) \
- imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
-#define imx25_add_mxc_ehci_hs(pdata) \
- imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
-
-extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
-#define imx25_add_mxc_nand(pdata) \
- imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
-#define imx25_add_sdhci_esdhc_imx(id, pdata) \
- imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx25_cspi_data[];
-#define imx25_add_spi_imx(id, pdata) \
- imx_add_spi_imx(&imx25_cspi_data[id], pdata)
-#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
-#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
-#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
config IMX_HAVE_PLATFORM_IMX2_WDT
bool
-config IMX_HAVE_PLATFORM_IMXDI_RTC
- bool
-
config IMX_HAVE_PLATFORM_IMX_FB
bool
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
obj-y += platform-imx-dma.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
.irq = soc ## _INT_FEC, \
}
-#ifdef CONFIG_SOC_IMX25
-const struct imx_fec_data imx25_fec_data __initconst =
- imx_fec_data_entry_single(MX25, "imx25-fec");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
imx_fec_data_entry_single(MX27, "imx27-fec");
.irq = soc ## _INT_USB_OTG, \
}
-#ifdef CONFIG_SOC_IMX25
-const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
- imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
- imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
-#define imx25_imx_i2c_data_entry(_id, _hwid) \
- imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
- imx25_imx_i2c_data_entry(0, 1),
- imx25_imx_i2c_data_entry(1, 2),
- imx25_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
#define imx27_imx_i2c_data_entry(_id, _hwid) \
imx_imx_keypad_data_entry_single(MX21, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst =
- imx_imx_keypad_data_entry_single(MX25, SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX27, SZ_16);
};
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
-#define imx25_imx_ssi_data_entry(_id, _hwid) \
- imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
- imx25_imx_ssi_data_entry(0, 1),
- imx25_imx_ssi_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
#define imx27_imx_ssi_data_entry(_id, _hwid) \
};
#endif
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
-#define imx25_imx_uart_data_entry(_id, _hwid) \
- imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
- imx25_imx_uart_data_entry(0, 1),
- imx25_imx_uart_data_entry(1, 2),
- imx25_imx_uart_data_entry(2, 3),
- imx25_imx_uart_data_entry(3, 4),
- imx25_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
#define imx27_imx_uart_data_entry(_id, _hwid) \
imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst =
- imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
+++ /dev/null
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <asm/sizes.h>
-
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_imxdi_rtc_data_entry_single(soc) \
- { \
- .iobase = soc ## _DRYICE_BASE_ADDR, \
- .irq = soc ## _INT_DRYICE, \
- }
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst =
- imx_imxdi_rtc_data_entry_single(MX25);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-struct platform_device *__init imx_add_imxdi_rtc(
- const struct imx_imxdi_rtc_data *data)
-{
- struct resource res[] = {
- {
- .start = data->iobase,
- .end = data->iobase + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = data->irq,
- .end = data->irq,
- .flags = IORESOURCE_IRQ,
- },
- };
-
- return imx_add_platform_device("imxdi_rtc", 0,
- res, ARRAY_SIZE(res), NULL, 0);
-}
.irqemmaprp = soc ## _INT_EMMAPRP, \
}
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
- imx_mx2_camera_data_entry_single(MX25, "imx25-camera");
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
.irq = soc ## _INT_USB_ ## hs, \
}
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst =
- imx_mxc_ehci_data_entry_single(MX25, 0, OTG);
-const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst =
- imx_mxc_ehci_data_entry_single(MX25, 1, HS);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
- imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K);
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
};
#endif
-#ifdef CONFIG_SOC_IMX25
-/* i.mx25 has the i.mx35 type cspi */
-const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
-#define imx25_cspi_data_entry(_id, _hwid) \
- imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K)
- imx25_cspi_data_entry(0, 1),
- imx25_cspi_data_entry(1, 2),
- imx25_cspi_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
#ifdef CONFIG_SOC_IMX27
const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
#define imx27_cspi_data_entry(_id, _hwid) \
+++ /dev/null
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define USBCTRL_OTGBASE_OFFSET 0x600
-
-#define MX25_OTG_SIC_SHIFT 29
-#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
-#define MX25_OTG_PM_BIT (1 << 24)
-#define MX25_OTG_PP_BIT (1 << 11)
-#define MX25_OTG_OCPOL_BIT (1 << 3)
-
-#define MX25_H1_SIC_SHIFT 21
-#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
-#define MX25_H1_PP_BIT (1 << 18)
-#define MX25_H1_PM_BIT (1 << 16)
-#define MX25_H1_IPPUE_UP_BIT (1 << 7)
-#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
-#define MX25_H1_TLL_BIT (1 << 5)
-#define MX25_H1_USBTE_BIT (1 << 4)
-#define MX25_H1_OCPOL_BIT (1 << 2)
-
-int mx25_initialize_usb_hw(int port, unsigned int flags)
-{
- unsigned int v;
-
- v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- switch (port) {
- case 0: /* OTG port */
- v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
- MX25_OTG_OCPOL_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX25_OTG_PM_BIT;
-
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MX25_OTG_PP_BIT;
-
- if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
- v |= MX25_OTG_OCPOL_BIT;
-
- break;
- case 1: /* H1 port */
- v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
- MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
- MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
- v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
-
- if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
- v |= MX25_H1_PM_BIT;
-
- if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
- v |= MX25_H1_PP_BIT;
-
- if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
- v |= MX25_H1_OCPOL_BIT;
-
- if (!(flags & MXC_EHCI_TTL_ENABLED))
- v |= MX25_H1_TLL_BIT;
-
- if (flags & MXC_EHCI_INTERNAL_PHY)
- v |= MX25_H1_USBTE_BIT;
-
- if (flags & MXC_EHCI_IPPUE_DOWN)
- v |= MX25_H1_IPPUE_DOWN_BIT;
-
- if (flags & MXC_EHCI_IPPUE_UP)
- v |= MX25_H1_IPPUE_UP_BIT;
-
- break;
- default:
- return -EINVAL;
- }
-
- writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
-
- return 0;
-}
-
+++ /dev/null
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <video/platform_lcd.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
- /* LCD */
- MX25_PAD_LD0__LD0,
- MX25_PAD_LD1__LD1,
- MX25_PAD_LD2__LD2,
- MX25_PAD_LD3__LD3,
- MX25_PAD_LD4__LD4,
- MX25_PAD_LD5__LD5,
- MX25_PAD_LD6__LD6,
- MX25_PAD_LD7__LD7,
- MX25_PAD_LD8__LD8,
- MX25_PAD_LD9__LD9,
- MX25_PAD_LD10__LD10,
- MX25_PAD_LD11__LD11,
- MX25_PAD_LD12__LD12,
- MX25_PAD_LD13__LD13,
- MX25_PAD_LD14__LD14,
- MX25_PAD_LD15__LD15,
- MX25_PAD_GPIO_E__LD16,
- MX25_PAD_GPIO_F__LD17,
- MX25_PAD_HSYNC__HSYNC,
- MX25_PAD_VSYNC__VSYNC,
- MX25_PAD_LSCLK__LSCLK,
- MX25_PAD_OE_ACD__OE_ACD,
- MX25_PAD_CONTRAST__CONTRAST,
- /* LCD_PWR */
- MX25_PAD_PWM__GPIO_1_26,
- /* LED */
- MX25_PAD_POWER_FAIL__GPIO_3_19,
- /* SWITCH */
- MX25_PAD_VSTBY_ACK__GPIO_3_18,
- /* UART2 */
- MX25_PAD_UART2_RTS__UART2_RTS,
- MX25_PAD_UART2_CTS__UART2_CTS,
- MX25_PAD_UART2_TXD__UART2_TXD,
- MX25_PAD_UART2_RXD__UART2_RXD,
- /* SD1 */
- MX25_PAD_SD1_CMD__SD1_CMD,
- MX25_PAD_SD1_CLK__SD1_CLK,
- MX25_PAD_SD1_DATA0__SD1_DATA0,
- MX25_PAD_SD1_DATA1__SD1_DATA1,
- MX25_PAD_SD1_DATA2__SD1_DATA2,
- MX25_PAD_SD1_DATA3__SD1_DATA3,
- /* SD1 CD */
- MX25_PAD_DE_B__GPIO_2_20,
- /* I2S */
- MX25_PAD_KPP_COL3__AUD5_TXFS,
- MX25_PAD_KPP_COL2__AUD5_TXC,
- MX25_PAD_KPP_COL1__AUD5_RXD,
- MX25_PAD_KPP_COL0__AUD5_TXD,
- /* CAN */
- MX25_PAD_GPIO_D__CAN2_RX,
- MX25_PAD_GPIO_C__CAN2_TX,
- /* SPI1 */
- MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
- MX25_PAD_CSPI1_MISO__CSPI1_MISO,
- MX25_PAD_CSPI1_SS0__GPIO_1_16,
- MX25_PAD_CSPI1_SS1__GPIO_1_17,
- MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
- MX25_PAD_CSPI1_RDY__GPIO_2_22,
-};
-
-#define GPIO_LED1 IMX_GPIO_NR(3, 19)
-#define GPIO_SWITCH1 IMX_GPIO_NR(3, 18)
-#define GPIO_SD1CD IMX_GPIO_NR(2, 20)
-#define GPIO_LCDPWR IMX_GPIO_NR(1, 26)
-#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 16)
-#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 17)
-#define GPIO_SPI1_IRQ IMX_GPIO_NR(2, 22)
-
-static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
- {
- .mode = {
- .name = "CMO-QVGA",
- .refresh = 60,
- .xres = 320,
- .yres = 240,
- .pixclock = KHZ2PICOS(6500),
- .left_margin = 30,
- .right_margin = 38,
- .upper_margin = 20,
- .lower_margin = 3,
- .hsync_len = 15,
- .vsync_len = 4,
- },
- .bpp = 16,
- .pcr = 0xCAD08B80,
- }, {
- .mode = {
- .name = "DVI-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 32000,
- .hsync_len = 7,
- .left_margin = 100,
- .right_margin = 100,
- .vsync_len = 7,
- .upper_margin = 7,
- .lower_margin = 100,
- },
- .pcr = 0xFA208B80,
- .bpp = 16,
- }, {
- .mode = {
- .name = "DVI-SVGA",
- .refresh = 60,
- .xres = 800,
- .yres = 600,
- .pixclock = 25000,
- .hsync_len = 7,
- .left_margin = 75,
- .right_margin = 75,
- .vsync_len = 7,
- .upper_margin = 7,
- .lower_margin = 75,
- },
- .pcr = 0xFA208B80,
- .bpp = 16,
- },
-};
-
-static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
- .mode = eukrea_mximxsd_modes,
- .num_modes = ARRAY_SIZE(eukrea_mximxsd_modes),
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00040060,
-};
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power)
- gpio_direction_output(GPIO_LCDPWR, 1);
- else
- gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
- .set_power = eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
- .name = "platform-lcd",
- .dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
-};
-
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = GPIO_LED1,
- },
-};
-
-static const struct gpio_led_platform_data
- eukrea_mbimxsd_led_info __initconst = {
- .leds = eukrea_mbimxsd_leds,
- .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
- {
- .gpio = GPIO_SWITCH1,
- .code = BTN_0,
- .desc = "BP1",
- .active_low = 1,
- .wakeup = 1,
- },
-};
-
-static const struct gpio_keys_platform_data
- eukrea_mbimxsd_button_data __initconst = {
- .buttons = eukrea_mbimxsd_gpio_buttons,
- .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
- &eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
- .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
- .cd_gpio = GPIO_SD1CD,
- .cd_type = ESDHC_CD_GPIO,
- .wp_type = ESDHC_WP_NONE,
-};
-
-static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
- {
- .modalias = "spidev",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 0,
- .mode = SPI_MODE_0,
- },
- {
- .modalias = "spidev",
- .max_speed_hz = 20000000,
- .bus_num = 0,
- .chip_select = 1,
- .mode = SPI_MODE_0,
- },
-};
-
-static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
-
-static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
- .chipselect = eukrea_mbimxsd25_spi_cs,
- .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx25 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd25_baseboard_init(void)
-{
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
- ARRAY_SIZE(eukrea_mbimxsd_pads)))
- printk(KERN_ERR "error setting mbimxsd pads !\n");
-
- imx25_add_imx_uart1(&uart_pdata);
- imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
- imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
-
- imx25_add_flexcan1();
- imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
-
- gpio_request(GPIO_LED1, "LED1");
- gpio_direction_output(GPIO_LED1, 1);
- gpio_free(GPIO_LED1);
-
- gpio_request(GPIO_SWITCH1, "SWITCH1");
- gpio_direction_input(GPIO_SWITCH1);
- gpio_free(GPIO_SWITCH1);
-
- gpio_request(GPIO_LCDPWR, "LCDPWR");
- gpio_direction_output(GPIO_LCDPWR, 1);
-
- i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
- ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
- gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
- gpio_direction_input(GPIO_SPI1_IRQ);
- gpio_free(GPIO_SPI1_IRQ);
- imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
- spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
- ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
-
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
- gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
- imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
- imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
.num_modes = ARRAY_SIZE(fb_modedb),
};
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
+static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
/* LCD */
MX35_PAD_LD0__IPU_DISPB_DAT_0,
MX35_PAD_LD1__IPU_DISPB_DAT_1,
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regulator/consumer.h>
#include <linux/irqchip/arm-gic.h>
#include "common.h"
+#include "hardware.h"
+#define GPC_CNTR 0x000
#define GPC_IMR1 0x008
+#define GPC_PGC_GPU_PDN 0x260
+#define GPC_PGC_GPU_PUPSCR 0x264
+#define GPC_PGC_GPU_PDNSCR 0x268
#define GPC_PGC_CPU_PDN 0x2a0
#define GPC_PGC_CPU_PUPSCR 0x2a4
#define GPC_PGC_CPU_PDNSCR 0x2a8
#define GPC_PGC_SW_SHIFT 0x0
#define IMR_NUM 4
+#define GPC_MAX_IRQS (IMR_NUM * 32)
+
+#define GPU_VPU_PUP_REQ BIT(1)
+#define GPU_VPU_PDN_REQ BIT(0)
+
+#define GPC_CLK_MAX 6
+
+struct pu_domain {
+ struct generic_pm_domain base;
+ struct regulator *reg;
+ struct clk *clk[GPC_CLK_MAX];
+ int num_clks;
+};
static void __iomem *gpc_base;
static u32 gpc_wake_irqs[IMR_NUM];
static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
{
- unsigned int idx = d->hwirq / 32 - 1;
+ unsigned int idx = d->hwirq / 32;
u32 mask;
- /* Sanity check for SPI irq */
- if (d->hwirq < 32)
- return -EINVAL;
-
mask = 1 << d->hwirq % 32;
gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
gpc_wake_irqs[idx] & ~mask;
+ /*
+ * Do *not* call into the parent, as the GIC doesn't have any
+ * wake-up facility...
+ */
return 0;
}
void __iomem *reg;
u32 val;
- reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4;
+ reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4;
val = readl_relaxed(reg);
val &= ~(1 << hwirq % 32);
writel_relaxed(val, reg);
void __iomem *reg;
u32 val;
- reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4;
+ reg = gpc_base + GPC_IMR1 + hwirq / 32 * 4;
val = readl_relaxed(reg);
val |= 1 << (hwirq % 32);
writel_relaxed(val, reg);
static void imx_gpc_irq_unmask(struct irq_data *d)
{
- /* Sanity check for SPI irq */
- if (d->hwirq < 32)
- return;
-
imx_gpc_hwirq_unmask(d->hwirq);
+ irq_chip_unmask_parent(d);
}
static void imx_gpc_irq_mask(struct irq_data *d)
{
- /* Sanity check for SPI irq */
- if (d->hwirq < 32)
- return;
-
imx_gpc_hwirq_mask(d->hwirq);
+ irq_chip_mask_parent(d);
}
-void __init imx_gpc_init(void)
+static struct irq_chip imx_gpc_chip = {
+ .name = "GPC",
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_mask = imx_gpc_irq_mask,
+ .irq_unmask = imx_gpc_irq_unmask,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_wake = imx_gpc_irq_set_wake,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+#endif
+};
+
+static int imx_gpc_domain_xlate(struct irq_domain *domain,
+ struct device_node *controller,
+ const u32 *intspec,
+ unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
{
- struct device_node *np;
+ if (domain->of_node != controller)
+ return -EINVAL; /* Shouldn't happen, really... */
+ if (intsize != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (intspec[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ *out_hwirq = intspec[1];
+ *out_type = intspec[2];
+ return 0;
+}
+
+static int imx_gpc_domain_alloc(struct irq_domain *domain,
+ unsigned int irq,
+ unsigned int nr_irqs, void *data)
+{
+ struct of_phandle_args *args = data;
+ struct of_phandle_args parent_args;
+ irq_hw_number_t hwirq;
int i;
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
- gpc_base = of_iomap(np, 0);
- WARN_ON(!gpc_base);
+ if (args->args_count != 3)
+ return -EINVAL; /* Not GIC compliant */
+ if (args->args[0] != 0)
+ return -EINVAL; /* No PPI should point to this domain */
+
+ hwirq = args->args[1];
+ if (hwirq >= GPC_MAX_IRQS)
+ return -EINVAL; /* Can't deal with this */
+
+ for (i = 0; i < nr_irqs; i++)
+ irq_domain_set_hwirq_and_chip(domain, irq + i, hwirq + i,
+ &imx_gpc_chip, NULL);
+
+ parent_args = *args;
+ parent_args.np = domain->parent->of_node;
+ return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args);
+}
+
+static struct irq_domain_ops imx_gpc_domain_ops = {
+ .xlate = imx_gpc_domain_xlate,
+ .alloc = imx_gpc_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
+static int __init imx_gpc_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *parent_domain, *domain;
+ int i;
+
+ if (!parent) {
+ pr_err("%s: no parent, giving up\n", node->full_name);
+ return -ENODEV;
+ }
+
+ parent_domain = irq_find_host(parent);
+ if (!parent_domain) {
+ pr_err("%s: unable to obtain parent domain\n", node->full_name);
+ return -ENXIO;
+ }
+
+ gpc_base = of_iomap(node, 0);
+ if (WARN_ON(!gpc_base))
+ return -ENOMEM;
+
+ domain = irq_domain_add_hierarchy(parent_domain, 0, GPC_MAX_IRQS,
+ node, &imx_gpc_domain_ops,
+ NULL);
+ if (!domain) {
+ iounmap(gpc_base);
+ return -ENOMEM;
+ }
/* Initially mask all interrupts */
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4);
- /* Register GPC as the secondary interrupt controller behind GIC */
- gic_arch_extn.irq_mask = imx_gpc_irq_mask;
- gic_arch_extn.irq_unmask = imx_gpc_irq_unmask;
- gic_arch_extn.irq_set_wake = imx_gpc_irq_set_wake;
+ return 0;
+}
+
+/*
+ * We cannot use the IRQCHIP_DECLARE macro that lives in
+ * drivers/irqchip, so we're forced to roll our own. Not very nice.
+ */
+OF_DECLARE_2(irqchip, imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);
+
+void __init imx_gpc_check_dt(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpc");
+ if (WARN_ON(!np ||
+ !of_find_property(np, "interrupt-controller", NULL)))
+ pr_warn("Outdated DT detected, system is about to crash!!!\n");
+}
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+
+static void _imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
+{
+ int iso, iso2sw;
+ u32 val;
+
+ /* Read ISO and ISO2SW power down delays */
+ val = readl_relaxed(gpc_base + GPC_PGC_GPU_PDNSCR);
+ iso = val & 0x3f;
+ iso2sw = (val >> 8) & 0x3f;
+
+ /* Gate off PU domain when GPU/VPU when powered down */
+ writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
+
+ /* Request GPC to power down GPU/VPU */
+ val = readl_relaxed(gpc_base + GPC_CNTR);
+ val |= GPU_VPU_PDN_REQ;
+ writel_relaxed(val, gpc_base + GPC_CNTR);
+
+ /* Wait ISO + ISO2SW IPG clock cycles */
+ ndelay((iso + iso2sw) * 1000 / 66);
+}
+
+static int imx6q_pm_pu_power_off(struct generic_pm_domain *genpd)
+{
+ struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
+
+ _imx6q_pm_pu_power_off(genpd);
+
+ if (pu->reg)
+ regulator_disable(pu->reg);
+
+ return 0;
+}
+
+static int imx6q_pm_pu_power_on(struct generic_pm_domain *genpd)
+{
+ struct pu_domain *pu = container_of(genpd, struct pu_domain, base);
+ int i, ret, sw, sw2iso;
+ u32 val;
+
+ if (pu->reg)
+ ret = regulator_enable(pu->reg);
+ if (pu->reg && ret) {
+ pr_err("%s: failed to enable regulator: %d\n", __func__, ret);
+ return ret;
+ }
+
+ /* Enable reset clocks for all devices in the PU domain */
+ for (i = 0; i < pu->num_clks; i++)
+ clk_prepare_enable(pu->clk[i]);
+
+ /* Gate off PU domain when GPU/VPU when powered down */
+ writel_relaxed(0x1, gpc_base + GPC_PGC_GPU_PDN);
+
+ /* Read ISO and ISO2SW power down delays */
+ val = readl_relaxed(gpc_base + GPC_PGC_GPU_PUPSCR);
+ sw = val & 0x3f;
+ sw2iso = (val >> 8) & 0x3f;
+
+ /* Request GPC to power up GPU/VPU */
+ val = readl_relaxed(gpc_base + GPC_CNTR);
+ val |= GPU_VPU_PUP_REQ;
+ writel_relaxed(val, gpc_base + GPC_CNTR);
+
+ /* Wait ISO + ISO2SW IPG clock cycles */
+ ndelay((sw + sw2iso) * 1000 / 66);
+
+ /* Disable reset clocks for all devices in the PU domain */
+ for (i = 0; i < pu->num_clks; i++)
+ clk_disable_unprepare(pu->clk[i]);
+
+ return 0;
+}
+
+static struct generic_pm_domain imx6q_arm_domain = {
+ .name = "ARM",
+};
+
+static struct pu_domain imx6q_pu_domain = {
+ .base = {
+ .name = "PU",
+ .power_off = imx6q_pm_pu_power_off,
+ .power_on = imx6q_pm_pu_power_on,
+ .power_off_latency_ns = 25000,
+ .power_on_latency_ns = 2000000,
+ },
+};
+
+static struct generic_pm_domain imx6sl_display_domain = {
+ .name = "DISPLAY",
+};
+
+static struct generic_pm_domain *imx_gpc_domains[] = {
+ &imx6q_arm_domain,
+ &imx6q_pu_domain.base,
+ &imx6sl_display_domain,
+};
+
+static struct genpd_onecell_data imx_gpc_onecell_data = {
+ .domains = imx_gpc_domains,
+ .num_domains = ARRAY_SIZE(imx_gpc_domains),
+};
+
+static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
+{
+ struct clk *clk;
+ bool is_off;
+ int i;
+
+ imx6q_pu_domain.reg = pu_reg;
+
+ for (i = 0; ; i++) {
+ clk = of_clk_get(dev->of_node, i);
+ if (IS_ERR(clk))
+ break;
+ if (i >= GPC_CLK_MAX) {
+ dev_err(dev, "more than %d clocks\n", GPC_CLK_MAX);
+ goto clk_err;
+ }
+ imx6q_pu_domain.clk[i] = clk;
+ }
+ imx6q_pu_domain.num_clks = i;
+
+ is_off = IS_ENABLED(CONFIG_PM);
+ if (is_off) {
+ _imx6q_pm_pu_power_off(&imx6q_pu_domain.base);
+ } else {
+ /*
+ * Enable power if compiled without CONFIG_PM in case the
+ * bootloader disabled it.
+ */
+ imx6q_pm_pu_power_on(&imx6q_pu_domain.base);
+ }
+
+ pm_genpd_init(&imx6q_pu_domain.base, NULL, is_off);
+ return of_genpd_add_provider_onecell(dev->of_node,
+ &imx_gpc_onecell_data);
+
+clk_err:
+ while (i--)
+ clk_put(imx6q_pu_domain.clk[i]);
+ return -EINVAL;
+}
+
+#else
+static inline int imx_gpc_genpd_init(struct device *dev, struct regulator *reg)
+{
+ return 0;
+}
+#endif /* CONFIG_PM_GENERIC_DOMAINS */
+
+static int imx_gpc_probe(struct platform_device *pdev)
+{
+ struct regulator *pu_reg;
+ int ret;
+
+ pu_reg = devm_regulator_get_optional(&pdev->dev, "pu");
+ if (PTR_ERR(pu_reg) == -ENODEV)
+ pu_reg = NULL;
+ if (IS_ERR(pu_reg)) {
+ ret = PTR_ERR(pu_reg);
+ dev_err(&pdev->dev, "failed to get pu regulator: %d\n", ret);
+ return ret;
+ }
+
+ return imx_gpc_genpd_init(&pdev->dev, pu_reg);
+}
+
+static const struct of_device_id imx_gpc_dt_ids[] = {
+ { .compatible = "fsl,imx6q-gpc" },
+ { .compatible = "fsl,imx6sl-gpc" },
+ { }
+};
+
+static struct platform_driver imx_gpc_driver = {
+ .driver = {
+ .name = "imx-gpc",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_gpc_dt_ids,
+ },
+ .probe = imx_gpc_probe,
+};
+
+static int __init imx_pgc_init(void)
+{
+ return platform_driver_register(&imx_gpc_driver);
}
+subsys_initcall(imx_pgc_init);
#include "mx21.h"
#include "mx27.h"
#include "mx1.h"
-#include "mx25.h"
#define imx_map_entry(soc, name, _type) { \
.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
+++ /dev/null
-/*
- * arch/arm/plat-mxc/include/mach/iomux-mx25.h
- *
- * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
- *
- * based on arch/arm/mach-mx25/mx25_pins.h
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- * and
- * arch/arm/plat-mxc/include/mach/iomux-mx35.h
- * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __MACH_IOMUX_MX25_H__
-#define __MACH_IOMUX_MX25_H__
-
-#include "iomux-v3.h"
-
-/*
- * IOMUX/PAD Bit field definitions
- */
-
-#define MX25_PAD_A10__A10 IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A10__GPIO_4_0 IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A13__A13 IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A13__GPIO_4_1 IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A14__A14 IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A14__GPIO_2_0 IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A15__A15 IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A15__GPIO_2_1 IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A16__A16 IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A16__GPIO_2_2 IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A17__A17 IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A17__GPIO_2_3 IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A18__A18 IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__GPIO_2_4 IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A19__A19 IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__GPIO_2_5 IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A20__A20 IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__GPIO_2_6 IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2 IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A21__A21 IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__GPIO_2_7 IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3 IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A22__A22 IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A22__GPIO_2_8 IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A23__A23 IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A23__GPIO_2_9 IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A24__A24 IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__GPIO_2_10 IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_A25__A25 IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__GPIO_2_11 IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EB0__EB0 IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB0__AUD4_TXD IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB0__GPIO_2_12 IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EB1__EB1 IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB1__AUD4_RXD IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
-#define MX25_PAD_EB1__GPIO_2_13 IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_OE__OE IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE__AUD4_TXC IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE__GPIO_2_14 IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS0__CS0 IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS0__GPIO_4_2 IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS1__CS1 IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS1__NF_CE3 IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS1__GPIO_4_3 IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS4__CS4 IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__NF_CE1 IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__UART5_CTS IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS4__GPIO_3_20 IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CS5__CS5 IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__NF_CE2 IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__UART5_RTS IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
-#define MX25_PAD_CS5__GPIO_3_21 IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NF_CE0__NF_CE0 IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NF_CE0__GPIO_3_22 IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_ECB__ECB IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_ECB__UART5_TXD_MUX IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_ECB__GPIO_3_23 IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LBA__LBA IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LBA__UART5_RXD_MUX IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
-#define MX25_PAD_LBA__GPIO_3_24 IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_BCLK__BCLK IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BCLK__GPIO_4_4 IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_RW__RW IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RW__AUD4_TXFS IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
-#define MX25_PAD_RW__GPIO_3_25 IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFWE_B__NFWE_B IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFWE_B__GPIO_3_26 IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFRE_B__NFRE_B IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFRE_B__GPIO_3_27 IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFALE__NFALE IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFALE__GPIO_3_28 IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFCLE__NFCLE IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFCLE__GPIO_3_29 IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFWP_B__NFWP_B IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_NFWP_B__GPIO_3_30 IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_NFRB__NFRB IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
-#define MX25_PAD_NFRB__GPIO_3_31 IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D15__D15 IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D15__LD16 IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D15__GPIO_4_5 IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D14__D14 IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D14__LD17 IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D14__GPIO_4_6 IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D13__D13 IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D13__LD18 IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_D13__GPIO_4_7 IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D12__D12 IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D12__GPIO_4_8 IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D11__D11 IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D11__GPIO_4_9 IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D10__D10 IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D10__GPIO_4_10 IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D10__USBOTG_OC IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_D9__D9 IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D9__GPIO_4_11 IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D9__USBH2_PWR IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
-
-#define MX25_PAD_D8__D8 IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D8__GPIO_4_12 IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D8__USBH2_OC IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_D7__D7 IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D7__GPIO_4_13 IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D6__D6 IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D6__GPIO_4_14 IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D5__D5 IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D5__GPIO_4_15 IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D4__D4 IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D4__GPIO_4_16 IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D3__D3 IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D3__GPIO_4_17 IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D2__D2 IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D2__GPIO_4_18 IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D1__D1 IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D1__GPIO_4_19 IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_D0__D0 IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_D0__GPIO_4_20 IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD0__LD0 IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD0__CSI_D0 IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD0__GPIO_2_15 IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD1__LD1 IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD1__CSI_D1 IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD1__GPIO_2_16 IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD2__LD2 IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD2__GPIO_2_17 IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD3__LD3 IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD3__GPIO_2_18 IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD4__LD4 IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD4__GPIO_2_19 IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD5__LD5 IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD5__GPIO_1_19 IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD6__LD6 IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD6__GPIO_1_20 IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD7__LD7 IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD7__GPIO_1_21 IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD8__LD8 IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD8__FEC_TX_ERR IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD9__LD9 IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD9__FEC_COL IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD10__LD10 IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD10__FEC_RX_ER IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD11__LD11 IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD11__FEC_RDATA2 IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD12__LD12 IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD12__FEC_RDATA3 IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_LD13__LD13 IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD13__FEC_TDATA2 IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD14__LD14 IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD14__FEC_TDATA3 IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LD15__LD15 IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_LD15__FEC_RX_CLK IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_HSYNC__HSYNC IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_HSYNC__GPIO_1_22 IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_VSYNC__VSYNC IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSYNC__GPIO_1_23 IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_LSCLK__LSCLK IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LSCLK__GPIO_1_24 IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_OE_ACD__OE_ACD IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_OE_ACD__GPIO_1_25 IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CONTRAST__CONTRAST IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__PWM4_PWMO IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_PWM__PWM IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_PWM__GPIO_1_26 IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_PWM__USBH2_OC IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_CSI_D2__CSI_D2 IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__UART5_RXD_MUX IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__GPIO_1_27 IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D2__CSPI3_MOSI IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D3__CSI_D3 IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D3__GPIO_1_28 IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D3__CSPI3_MISO IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D4__CSI_D4 IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__UART5_RTS IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__GPIO_1_29 IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D4__CSPI3_SCLK IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D5__CSI_D5 IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D5__GPIO_1_30 IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D5__CSPI3_RDY IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D6__CSI_D6 IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D6__GPIO_1_31 IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D7__CSI_D7 IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D7__GPIO_1_6 IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D8__CSI_D8 IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D8__GPIO_1_7 IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_D9__CSI_D9 IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_D9__GPIO_4_21 IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_MCLK__CSI_MCLK IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_MCLK__GPIO_1_8 IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9 IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10 IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_I2C1_CLK__I2C1_CLK IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_I2C1_CLK__GPIO_1_12 IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_I2C1_DAT__I2C1_DAT IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_I2C1_DAT__GPIO_1_13 IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15 IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16 IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SS1__GPIO_1_17 IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22 IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
-#define MX25_PAD_UART1_RXD__GPIO_4_22 IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART1_TXD__GPIO_4_23 IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_UART1_RTS__CSI_D0 IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
-#define MX25_PAD_UART1_RTS__GPIO_4_24 IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_UART1_CTS__CSI_D1 IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
-#define MX25_PAD_UART1_CTS__GPIO_4_25 IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RXD__GPIO_4_26 IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_TXD__GPIO_4_27 IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_RTS__UART2_RTS IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__GPIO_4_28 IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UART2_CTS__FEC_RX_ER IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
-#define MX25_PAD_UART2_CTS__UART2_CTS IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_CTS__GPIO_4_29 IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2 IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_CMD__GPIO_2_23 IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3 IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_CLK__GPIO_2_24 IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA0__GPIO_2_25 IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA1__AUD7_RXD IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA1__GPIO_2_26 IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA2__GPIO_2_27 IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
-#define MX25_PAD_SD1_DATA3__GPIO_2_28 IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define KPP_CTL_ROW (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define KPP_CTL_COL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-#define MX25_PAD_KPP_ROW0__KPP_ROW0 IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW0__GPIO_2_29 IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW1__KPP_ROW1 IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW1__GPIO_2_30 IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW2__KPP_ROW2 IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW2__CSI_D0 IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
-#define MX25_PAD_KPP_ROW2__GPIO_2_31 IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_ROW3__KPP_ROW3 IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, KPP_CTL_ROW)
-#define MX25_PAD_KPP_ROW3__CSI_LD1 IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
-#define MX25_PAD_KPP_ROW3__GPIO_3_0 IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL0__KPP_COL0 IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL0__AUD5_TXD IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL0__GPIO_3_1 IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL1__KPP_COL1 IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL1__AUD5_RXD IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL1__GPIO_3_2 IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL2__KPP_COL2 IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL2__UART4_RTS IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL2__AUD5_TXC IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL2__GPIO_3_3 IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_KPP_COL3__KPP_COL3 IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, KPP_CTL_COL)
-#define MX25_PAD_KPP_COL3__UART4_CTS IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_KPP_COL3__AUD5_TXFS IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX25_PAD_KPP_COL3__GPIO_3_4 IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDC__AUD4_TXD IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDC__GPIO_3_5 IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_FEC_MDIO__AUD4_RXD IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_MDIO__GPIO_3_6 IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7 IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8 IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9 IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10 IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11 IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
-#define MX25_PAD_FEC_RX_DV__CAN2_RX IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12 IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_RTCK__RTCK IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RTCK__OWIRE IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_RTCK__GPIO_3_14 IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_DE_B__DE_B IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_DE_B__GPIO_2_20 IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_TDO__TDO IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_GPIO_A__GPIO_A IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_A__CAN1_TX IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
-
-#define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP)
-#define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
-
-#define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
-
-#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
-
-#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST)
-#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_F__AUD7_TXC IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_VSTBY_REQ__VSTBY_REQ IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_REQ__AUD7_TXFS IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_REQ__GPIO_3_17 IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18 IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_POWER_FAIL__POWER_FAIL IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_POWER_FAIL__AUD7_RXD IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
-#define MX25_PAD_POWER_FAIL__GPIO_3_19 IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CLKO__CLKO IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CLKO__GPIO_2_21 IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE0__GPIO_4_30 IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE1__BOOT_MODE1 IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_BOOT_MODE1__GPIO_4_31 IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
-
-#define MX25_PAD_CTL_GRP_DVS_MISC IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_FEC IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_JTAG IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_NFC IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_CSI IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_WEIM IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_DDR IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_CRM IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_KPP IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_SDHC1 IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_LCD IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_UART IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_NFC IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_CSI IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DSE_CSPI1 IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DDRTYPE IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_SDHC1 IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CTL_GRP_DVS_LCD IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX25_H__ */
*/
int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
/*
- * setups mutliple pins
+ * setups multiple pins
* convenient way to call the above function with tables
*/
int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
return 0;
}
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
+int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
+ unsigned count)
{
- iomux_v3_cfg_t *p = pad_list;
+ const iomux_v3_cfg_t *p = pad_list;
int i;
int ret;
int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
/*
- * setups mutliple pads
+ * setups multiple pads
* convenient way to call the above function with tables
*/
-int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
+int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
+ unsigned count);
/*
* Initialise the iomux controller
},
};
-static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
+static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
+++ /dev/null
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
- /* FEC - RMII */
- MX25_PAD_FEC_MDC__FEC_MDC,
- MX25_PAD_FEC_MDIO__FEC_MDIO,
- MX25_PAD_FEC_TDATA0__FEC_TDATA0,
- MX25_PAD_FEC_TDATA1__FEC_TDATA1,
- MX25_PAD_FEC_TX_EN__FEC_TX_EN,
- MX25_PAD_FEC_RDATA0__FEC_RDATA0,
- MX25_PAD_FEC_RDATA1__FEC_RDATA1,
- MX25_PAD_FEC_RX_DV__FEC_RX_DV,
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
- /* I2C1 */
- MX25_PAD_I2C1_CLK__I2C1_CLK,
- MX25_PAD_I2C1_DAT__I2C1_DAT,
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxc_nand_platform_data
-eukrea_cpuimx25_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static const struct imxi2c_platform_data
-eukrea_cpuimx25_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
-{
- return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
- .init = eukrea_cpuimx25_otg_init,
- .portsc = MXC_EHCI_MODE_UTMI,
-};
-
-static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
-{
- return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
- MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
- .init = eukrea_cpuimx25_usbh2_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
- .workaround = FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx25_otg_mode(char *options)
-{
- if (!strcmp(options, "host"))
- otg_mode_host = true;
- else if (!strcmp(options, "device"))
- otg_mode_host = false;
- else
- pr_info("otg_mode neither \"host\" nor \"device\". "
- "Defaulting to device\n");
- return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
-
-static void __init eukrea_cpuimx25_init(void)
-{
- imx25_soc_init();
-
- if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
- ARRAY_SIZE(eukrea_cpuimx25_pads)))
- printk(KERN_ERR "error setting cpuimx25 pads !\n");
-
- imx25_add_imx_uart0(&uart_pdata);
- imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
- imx25_add_imxdi_rtc();
- imx25_add_fec(&mx25_fec_pdata);
- imx25_add_imx2_wdt();
-
- i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
- ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
- imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
-
- if (otg_mode_host)
- imx25_add_mxc_ehci_otg(&otg_pdata);
- else
- imx25_add_fsl_usb2_udc(&otg_device_pdata);
-
- imx25_add_mxc_ehci_hs(&usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
- eukrea_mbimxsd25_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx25_timer_init(void)
-{
- mx25_clocks_init();
-}
-
-MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
- /* Maintainer: Eukrea Electromatique */
- .atag_offset = 0x100,
- .map_io = mx25_map_io,
- .init_early = imx25_init_early,
- .init_irq = mx25_init_irq,
- .init_time = eukrea_cpuimx25_timer_init,
- .init_machine = eukrea_cpuimx25_init,
- .restart = mxc_restart,
-MACHINE_END
*/
#include <linux/irq.h>
+#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
-#include "mx25.h"
+#include "hardware.h"
+
+static void __init imx25_init_early(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX25);
+}
+
+static void __init mx25_init_irq(void)
+{
+ struct device_node *np;
+ void __iomem *avic_base;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,avic");
+ avic_base = of_iomap(np, 0);
+ BUG_ON(!avic_base);
+ mxc_init_irq(avic_base);
+}
static const char * const imx25_dt_board_compat[] __initconst = {
"fsl,imx25",
};
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
- .map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.dt_compat = imx25_dt_board_compat,
static void __init imx6q_init_irq(void)
{
+ imx_gpc_check_dt();
imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
- imx_gpc_init();
irqchip_init();
}
static void __init imx6sl_init_irq(void)
{
+ imx_gpc_check_dt();
imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
- imx_gpc_init();
irqchip_init();
}
static void __init imx6sx_init_irq(void)
{
+ imx_gpc_check_dt();
imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
- imx_gpc_init();
irqchip_init();
}
+++ /dev/null
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-/*
- * This machine is known as:
- * - i.MX25 3-Stack Development System
- * - i.MX25 Platform Development Kit (i.MX25 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-#define MX25PDK_CAN_PWDN IMX_GPIO_NR(4, 6)
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static iomux_v3_cfg_t mx25pdk_pads[] = {
- MX25_PAD_FEC_MDC__FEC_MDC,
- MX25_PAD_FEC_MDIO__FEC_MDIO,
- MX25_PAD_FEC_TDATA0__FEC_TDATA0,
- MX25_PAD_FEC_TDATA1__FEC_TDATA1,
- MX25_PAD_FEC_TX_EN__FEC_TX_EN,
- MX25_PAD_FEC_RDATA0__FEC_RDATA0,
- MX25_PAD_FEC_RDATA1__FEC_RDATA1,
- MX25_PAD_FEC_RX_DV__FEC_RX_DV,
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
- MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
- MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
-
- /* LCD */
- MX25_PAD_LD0__LD0,
- MX25_PAD_LD1__LD1,
- MX25_PAD_LD2__LD2,
- MX25_PAD_LD3__LD3,
- MX25_PAD_LD4__LD4,
- MX25_PAD_LD5__LD5,
- MX25_PAD_LD6__LD6,
- MX25_PAD_LD7__LD7,
- MX25_PAD_LD8__LD8,
- MX25_PAD_LD9__LD9,
- MX25_PAD_LD10__LD10,
- MX25_PAD_LD11__LD11,
- MX25_PAD_LD12__LD12,
- MX25_PAD_LD13__LD13,
- MX25_PAD_LD14__LD14,
- MX25_PAD_LD15__LD15,
- MX25_PAD_GPIO_E__LD16,
- MX25_PAD_GPIO_F__LD17,
- MX25_PAD_HSYNC__HSYNC,
- MX25_PAD_VSYNC__VSYNC,
- MX25_PAD_LSCLK__LSCLK,
- MX25_PAD_OE_ACD__OE_ACD,
- MX25_PAD_CONTRAST__CONTRAST,
-
- /* Keypad */
- MX25_PAD_KPP_ROW0__KPP_ROW0,
- MX25_PAD_KPP_ROW1__KPP_ROW1,
- MX25_PAD_KPP_ROW2__KPP_ROW2,
- MX25_PAD_KPP_ROW3__KPP_ROW3,
- MX25_PAD_KPP_COL0__KPP_COL0,
- MX25_PAD_KPP_COL1__KPP_COL1,
- MX25_PAD_KPP_COL2__KPP_COL2,
- MX25_PAD_KPP_COL3__KPP_COL3,
-
- /* SD1 */
- MX25_PAD_SD1_CMD__SD1_CMD,
- MX25_PAD_SD1_CLK__SD1_CLK,
- MX25_PAD_SD1_DATA0__SD1_DATA0,
- MX25_PAD_SD1_DATA1__SD1_DATA1,
- MX25_PAD_SD1_DATA2__SD1_DATA2,
- MX25_PAD_SD1_DATA3__SD1_DATA3,
- MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
- MX25_PAD_A15__GPIO_2_1, /* CardDetect */
-
- /* I2C1 */
- MX25_PAD_I2C1_CLK__I2C1_CLK,
- MX25_PAD_I2C1_DAT__I2C1_DAT,
-
- /* CAN1 */
- MX25_PAD_GPIO_A__CAN1_TX,
- MX25_PAD_GPIO_B__CAN1_RX,
- MX25_PAD_D14__GPIO_4_6, /* CAN_PWDN */
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
- .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-#define FEC_ENABLE_GPIO IMX_GPIO_NR(2, 3)
-#define FEC_RESET_B_GPIO IMX_GPIO_NR(4, 8)
-
-static void __init mx25pdk_fec_reset(void)
-{
- gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
- gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
-
- gpio_direction_output(FEC_ENABLE_GPIO, 0); /* drop PHY power */
- gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
- udelay(2);
-
- /* turn on PHY power and lift reset */
- gpio_set_value(FEC_ENABLE_GPIO, 1);
- gpio_set_value(FEC_RESET_B_GPIO, 1);
-}
-
-static const struct mxc_nand_platform_data
-mx25pdk_nand_board_info __initconst = {
- .width = 1,
- .hw_ecc = 1,
- .flash_bbt = 1,
-};
-
-static struct imx_fb_videomode mx25pdk_modes[] = {
- {
- .mode = {
- .name = "CRT-VGA",
- .refresh = 60,
- .xres = 640,
- .yres = 480,
- .pixclock = 39683,
- .left_margin = 45,
- .right_margin = 114,
- .upper_margin = 33,
- .lower_margin = 11,
- .hsync_len = 1,
- .vsync_len = 1,
- },
- .bpp = 16,
- .pcr = 0xFA208B80,
- },
-};
-
-static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
- .mode = mx25pdk_modes,
- .num_modes = ARRAY_SIZE(mx25pdk_modes),
- .pwmr = 0x00A903FF,
- .lscr1 = 0x00120300,
- .dmacr = 0x00020010,
-};
-
-static const uint32_t mx25pdk_keymap[] = {
- KEY(0, 0, KEY_UP),
- KEY(0, 1, KEY_DOWN),
- KEY(0, 2, KEY_VOLUMEDOWN),
- KEY(0, 3, KEY_HOME),
- KEY(1, 0, KEY_RIGHT),
- KEY(1, 1, KEY_LEFT),
- KEY(1, 2, KEY_ENTER),
- KEY(1, 3, KEY_VOLUMEUP),
- KEY(2, 0, KEY_F6),
- KEY(2, 1, KEY_F8),
- KEY(2, 2, KEY_F9),
- KEY(2, 3, KEY_F10),
- KEY(3, 0, KEY_F1),
- KEY(3, 1, KEY_F2),
- KEY(3, 2, KEY_F3),
- KEY(3, 3, KEY_POWER),
-};
-
-static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
- .keymap = mx25pdk_keymap,
- .keymap_size = ARRAY_SIZE(mx25pdk_keymap),
-};
-
-static int mx25pdk_usbh2_init(struct platform_device *pdev)
-{
- return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
- .init = mx25pdk_usbh2_init,
- .portsc = MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
- .operating_mode = FSL_USB2_DR_DEVICE,
- .phy_mode = FSL_USB2_PHY_UTMI,
-};
-
-static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
- .bitrate = 100000,
-};
-
-#define SD1_GPIO_WP IMX_GPIO_NR(2, 0)
-#define SD1_GPIO_CD IMX_GPIO_NR(2, 1)
-
-static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
- .wp_gpio = SD1_GPIO_WP,
- .cd_gpio = SD1_GPIO_CD,
- .wp_type = ESDHC_WP_GPIO,
- .cd_type = ESDHC_CD_GPIO,
-};
-
-static void __init mx25pdk_init(void)
-{
- imx25_soc_init();
-
- mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
- ARRAY_SIZE(mx25pdk_pads));
-
- imx25_add_imx_uart0(&uart_pdata);
- imx25_add_fsl_usb2_udc(&otg_device_pdata);
- imx25_add_mxc_ehci_hs(&usbh2_pdata);
- imx25_add_mxc_nand(&mx25pdk_nand_board_info);
- imx25_add_imxdi_rtc();
- imx25_add_imx_fb(&mx25pdk_fb_pdata);
- imx25_add_imx2_wdt();
-
- mx25pdk_fec_reset();
- imx25_add_fec(&mx25_fec_pdata);
- imx25_add_imx_keypad(&mx25pdk_keymap_data);
-
- imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
- imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
-
- gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
- imx25_add_flexcan0();
-}
-
-static void __init mx25pdk_timer_init(void)
-{
- mx25_clocks_init();
-}
-
-MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
- /* Maintainer: Freescale Semiconductor, Inc. */
- .atag_offset = 0x100,
- .map_io = mx25_map_io,
- .init_early = imx25_init_early,
- .init_irq = mx25_init_irq,
- .init_time = mx25pdk_timer_init,
- .init_machine = mx25pdk_init,
- .restart = mxc_restart,
-MACHINE_END
&mx35pdk_flash,
};
-static iomux_v3_cfg_t mx35pdk_pads[] = {
+static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
&pcm043_flash,
};
-static iomux_v3_cfg_t pcm043_pads[] = {
+static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
}
};
-static iomux_v3_cfg_t vpr200_pads[] = {
+static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
/* UART1 */
MX35_PAD_TXD1__UART1_TXD_MUX,
MX35_PAD_RXD1__UART1_RXD_MUX,
+++ /dev/null
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/pinctrl/machine.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices/devices-common.h"
-#include "hardware.h"
-#include "iomux-v3.h"
-#include "mx25.h"
-
-/*
- * This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX25 boards.
- */
-static struct map_desc mx25_io_desc[] __initdata = {
- imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
- imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
- imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx25_map_io(void)
-{
- iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
-}
-
-void __init imx25_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MX25);
- mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
-}
-
-void __init mx25_init_irq(void)
-{
- mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
-}
-
-static struct sdma_platform_data imx25_sdma_pdata __initdata = {
- .fw_name = "sdma-imx25.bin",
-};
-
-static const struct resource imx25_audmux_res[] __initconst = {
- DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
-void __init imx25_soc_init(void)
-{
- mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
- mxc_device_init();
-
- /* i.mx25 has the i.mx35 type gpio */
- mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
- mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
- mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
- mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
-
- pinctrl_provide_dummies();
- /* i.mx25 has the i.mx35 type sdma */
- imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
- /* i.mx25 has the i.mx31 type audmux */
- platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res,
- ARRAY_SIZE(imx25_audmux_res));
-}
+++ /dev/null
-#ifndef __MACH_MX25_H__
-#define __MACH_MX25_H__
-
-#define MX25_AIPS1_BASE_ADDR 0x43f00000
-#define MX25_AIPS1_SIZE SZ_1M
-#define MX25_AIPS2_BASE_ADDR 0x53f00000
-#define MX25_AIPS2_SIZE SZ_1M
-#define MX25_AVIC_BASE_ADDR 0x68000000
-#define MX25_AVIC_SIZE SZ_1M
-
-#define MX25_I2C1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x80000)
-#define MX25_I2C3_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x84000)
-#define MX25_CAN1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x88000)
-#define MX25_CAN2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x8c000)
-#define MX25_I2C2_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0x98000)
-#define MX25_CSPI1_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xa4000)
-#define MX25_IOMUXC_BASE_ADDR (MX25_AIPS1_BASE_ADDR + 0xac000)
-
-#define MX25_CRM_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x80000)
-#define MX25_GPT1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x90000)
-#define MX25_GPIO4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0x9c000)
-#define MX25_PWM2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa0000)
-#define MX25_GPIO3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa4000)
-#define MX25_PWM3_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xa8000)
-#define MX25_PWM4_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xc8000)
-#define MX25_GPIO1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xcc000)
-#define MX25_GPIO2_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xd0000)
-#define MX25_WDOG_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xdc000)
-#define MX25_PWM1_BASE_ADDR (MX25_AIPS2_BASE_ADDR + 0xe0000)
-
-#define MX25_UART1_BASE_ADDR 0x43f90000
-#define MX25_UART2_BASE_ADDR 0x43f94000
-#define MX25_AUDMUX_BASE_ADDR 0x43fb0000
-#define MX25_UART3_BASE_ADDR 0x5000c000
-#define MX25_UART4_BASE_ADDR 0x50008000
-#define MX25_UART5_BASE_ADDR 0x5002c000
-
-#define MX25_CSPI3_BASE_ADDR 0x50004000
-#define MX25_CSPI2_BASE_ADDR 0x50010000
-#define MX25_FEC_BASE_ADDR 0x50038000
-#define MX25_SSI2_BASE_ADDR 0x50014000
-#define MX25_SSI1_BASE_ADDR 0x50034000
-#define MX25_NFC_BASE_ADDR 0xbb000000
-#define MX25_IIM_BASE_ADDR 0x53ff0000
-#define MX25_DRYICE_BASE_ADDR 0x53ffc000
-#define MX25_ESDHC1_BASE_ADDR 0x53fb4000
-#define MX25_ESDHC2_BASE_ADDR 0x53fb8000
-#define MX25_LCDC_BASE_ADDR 0x53fbc000
-#define MX25_KPP_BASE_ADDR 0x43fa8000
-#define MX25_SDMA_BASE_ADDR 0x53fd4000
-#define MX25_USB_BASE_ADDR 0x53ff4000
-#define MX25_USB_OTG_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0000)
-/*
- * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200
- * for the host controller. Early documentation drafts specified 0x400 and
- * Freescale internal sources confirm only the latter value to work.
- */
-#define MX25_USB_HS_BASE_ADDR (MX25_USB_BASE_ADDR + 0x0400)
-#define MX25_CSI_BASE_ADDR 0x53ff8000
-
-#define MX25_IO_P2V(x) IMX_IO_P2V(x)
-#define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0)
-#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3)
-#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4)
-#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5)
-#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8)
-#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9)
-#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10)
-#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11)
-#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12)
-#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13)
-#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14)
-#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16)
-#define MX25_INT_CSI (NR_IRQS_LEGACY + 17)
-#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18)
-#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23)
-#define MX25_INT_KPP (NR_IRQS_LEGACY + 24)
-#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25)
-#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26)
-#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32)
-#define MX25_INT_NFC (NR_IRQS_LEGACY + 33)
-#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34)
-#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35)
-#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36)
-#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37)
-#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39)
-#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40)
-#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41)
-#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42)
-#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43)
-#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44)
-#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45)
-#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51)
-#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52)
-#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54)
-#define MX25_INT_FEC (NR_IRQS_LEGACY + 57)
-
-#define MX25_DMA_REQ_SSI2_RX1 22
-#define MX25_DMA_REQ_SSI2_TX1 23
-#define MX25_DMA_REQ_SSI2_RX0 24
-#define MX25_DMA_REQ_SSI2_TX0 25
-#define MX25_DMA_REQ_SSI1_RX1 26
-#define MX25_DMA_REQ_SSI1_TX1 27
-#define MX25_DMA_REQ_SSI1_RX0 28
-#define MX25_DMA_REQ_SSI1_TX0 29
-
-#ifndef __ASSEMBLY__
-extern int mx25_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX25_H__ */
* Low-Power mode.
* 3) Software should mask IRQ #32 right after CCM Low-Power mode
* is set (set bits 0-1 of CCM_CLPCR).
+ *
+ * Note that IRQ #32 is GIC SPI #0.
*/
- imx_gpc_hwirq_unmask(32);
+ imx_gpc_hwirq_unmask(0);
writel_relaxed(val, ccm_base + CLPCR);
- imx_gpc_hwirq_mask(32);
+ imx_gpc_hwirq_mask(0);
return 0;
}
static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
-#ifndef CONFIG_OMAP_32K_TIMER
-
-static unsigned short enable_dyn_sleep = 0;
-
-#else
-
-static unsigned short enable_dyn_sleep = 1;
+static unsigned short enable_dyn_sleep;
static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
char *buf)
{
unsigned short value;
if (sscanf(buf, "%hu", &value) != 1 ||
- (value != 0 && value != 1)) {
- printk(KERN_ERR "idle_sleep_store: Invalid value\n");
+ (value != 0 && value != 1) ||
+ (value != 0 && !IS_ENABLED(CONFIG_OMAP_32K_TIMER))) {
+ pr_err("idle_sleep_store: Invalid value\n");
return -EINVAL;
}
enable_dyn_sleep = value;
static struct kobj_attribute sleep_while_idle_attr =
__ATTR(sleep_while_idle, 0644, idle_show, idle_store);
-#endif
static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
{
extern __u32 arm_idlect1_mask;
__u32 use_idlect1 = arm_idlect1_mask;
- int do_sleep = 0;
local_fiq_disable();
#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
-#warning Enable 32kHz OS timer in order to allow sleep states in idle
use_idlect1 = use_idlect1 & ~(1 << 9);
-#else
- if (enable_dyn_sleep)
- do_sleep = 1;
#endif
#ifdef CONFIG_OMAP_DM_TIMER
if (omap_dma_running())
use_idlect1 &= ~(1 << 6);
- /* We should be able to remove the do_sleep variable and multiple
+ /*
+ * We should be able to remove the do_sleep variable and multiple
* tests above as soon as drivers, timer and DMA code have been fixed.
- * Even the sleep block count should become obsolete. */
- if ((use_idlect1 != ~0) || !do_sleep) {
+ * Even the sleep block count should become obsolete.
+ */
+ if ((use_idlect1 != ~0) || !enable_dyn_sleep) {
__u32 saved_idlect1 = omap_readl(ARM_IDLECT1);
if (cpu_is_omap15xx())
static int __init omap_pm_init(void)
{
-
-#ifdef CONFIG_OMAP_32K_TIMER
- int error;
-#endif
+ int error = 0;
if (!cpu_class_is_omap1())
return -ENODEV;
- printk("Power Management for TI OMAP.\n");
+ pr_info("Power Management for TI OMAP.\n");
+
+ if (!IS_ENABLED(CONFIG_OMAP_32K_TIMER))
+ pr_info("OMAP1 PM: sleep states in idle disabled due to no 32KiHz timer\n");
+
+ if (!IS_ENABLED(CONFIG_OMAP_DM_TIMER))
+ pr_info("OMAP1 PM: sleep states in idle disabled due to no DMTIMER support\n");
+
+ if (IS_ENABLED(CONFIG_OMAP_32K_TIMER) &&
+ IS_ENABLED(CONFIG_OMAP_DM_TIMER)) {
+ /* OMAP16xx only */
+ pr_info("OMAP1 PM: sleep states in idle enabled\n");
+ enable_dyn_sleep = 1;
+ }
/*
* We copy the assembler sleep/wakeup routines to SRAM.
omap_pm_init_debugfs();
#endif
-#ifdef CONFIG_OMAP_32K_TIMER
error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
if (error)
printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
-#endif
if (cpu_is_omap16xx()) {
/* configure LOW_PWR pin */
omap_cfg_reg(T20_1610_LOW_PWR);
}
- return 0;
+ return error;
}
__initcall(omap_pm_init);
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
select IRQ_CROSSBAR
+ select ARM_ERRATA_798181 if SMP
config ARCH_OMAP2PLUS
bool
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;
-config OMAP4_ERRATA_I688
- bool "OMAP4 errata: Async Bridge Corruption"
- depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
- select ARCH_HAS_BARRIERS
- help
- If a data is stalled inside asynchronous bridge because of back
- pressure, it may be accepted multiple times, creating pointer
- misalignment that will corrupt next transfers on that data path
- until next reset of the system (No recovery procedure once the
- issue is hit, the path remains consistently broken). Async bridge
- can be found on path between MPU to EMIF and MPU to L3 interconnect.
- This situation can happen only when the idle is initiated by a
- Master Request Disconnection (which is trigged by software when
- executing WFI on CPU).
- The work-around for this errata needs all the initiators connected
- through async bridge must ensure that data path is properly drained
- before issuing WFI. This condition will be met if one Strongly ordered
- access is performed to the target right before executing the WFI.
- In MPU case, L3 T2ASYNC FIFO and DDR T2ASYNC FIFO needs to be drained.
- IO barrier ensure that there is no synchronisation loss on initiators
- operating on both interconnect port simultaneously.
endmenu
endif
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/of_address.h>
+#include <linux/bootmem.h>
#include <asm/cpu.h>
#include <trace/events/power.h>
static bool clkdm_control = true;
static LIST_HEAD(clk_hw_omap_clocks);
-void __iomem *clk_memmaps[CLK_MAX_MEMMAPS];
+
+struct clk_iomap {
+ struct regmap *regmap;
+ void __iomem *mem;
+};
+
+static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
+
+static void clk_memmap_writel(u32 val, void __iomem *reg)
+{
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_write(io->regmap, r->offset, val);
+ else
+ writel_relaxed(val, io->mem + r->offset);
+}
+
+static u32 clk_memmap_readl(void __iomem *reg)
+{
+ u32 val;
+ struct clk_omap_reg *r = (struct clk_omap_reg *)®
+ struct clk_iomap *io = clk_memmaps[r->index];
+
+ if (io->regmap)
+ regmap_read(io->regmap, r->offset, &val);
+ else
+ val = readl_relaxed(io->mem + r->offset);
+
+ return val;
+}
void omap2_clk_writel(u32 val, struct clk_hw_omap *clk, void __iomem *reg)
{
- if (clk->flags & MEMMAP_ADDRESSING) {
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- writel_relaxed(val, clk_memmaps[r->index] + r->offset);
- } else {
+ if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
writel_relaxed(val, reg);
- }
+ else
+ clk_memmap_writel(val, reg);
}
u32 omap2_clk_readl(struct clk_hw_omap *clk, void __iomem *reg)
{
- u32 val;
+ if (WARN_ON_ONCE(!(clk->flags & MEMMAP_ADDRESSING)))
+ return readl_relaxed(reg);
+ else
+ return clk_memmap_readl(reg);
+}
- if (clk->flags & MEMMAP_ADDRESSING) {
- struct clk_omap_reg *r = (struct clk_omap_reg *)®
- val = readl_relaxed(clk_memmaps[r->index] + r->offset);
- } else {
- val = readl_relaxed(reg);
- }
+static struct ti_clk_ll_ops omap_clk_ll_ops = {
+ .clk_readl = clk_memmap_readl,
+ .clk_writel = clk_memmap_writel,
+};
- return val;
+/**
+ * omap2_clk_provider_init - initialize a clock provider
+ * @match_table: DT device table to match for devices to init
+ * @np: device node pointer for the this clock provider
+ * @index: index for the clock provider
+ + @syscon: syscon regmap pointer
+ * @mem: iomem pointer for the clock provider memory area, only used if
+ * syscon is not provided
+ *
+ * Initializes a clock provider module (CM/PRM etc.), registering
+ * the memory mapping at specified index and initializing the
+ * low level driver infrastructure. Returns 0 in success.
+ */
+int __init omap2_clk_provider_init(struct device_node *np, int index,
+ struct regmap *syscon, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ ti_clk_ll_ops = &omap_clk_ll_ops;
+
+ io = kzalloc(sizeof(*io), GFP_KERNEL);
+
+ io->regmap = syscon;
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
+
+ ti_dt_clk_init_provider(np, index);
+
+ return 0;
+}
+
+/**
+ * omap2_clk_legacy_provider_init - initialize a legacy clock provider
+ * @index: index for the clock provider
+ * @mem: iomem pointer for the clock provider memory area
+ *
+ * Initializes a legacy clock provider memory mapping.
+ */
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
+{
+ struct clk_iomap *io;
+
+ ti_clk_ll_ops = &omap_clk_ll_ops;
+
+ io = memblock_virt_alloc(sizeof(*io), 0);
+
+ io->mem = mem;
+
+ clk_memmaps[index] = io;
}
/*
extern const struct clksel_rate div_1_4_rates[];
extern const struct clksel_rate div31_1to31_rates[];
-extern void __iomem *clk_memmaps[];
-
extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
+struct regmap;
+
+int __init omap2_clk_provider_init(struct device_node *np, int index,
+ struct regmap *syscon, void __iomem *mem);
+void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem);
+
void __init ti_clk_init_features(void);
#endif
int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
extern int cm_register(struct cm_ll_data *cld);
extern int cm_unregister(struct cm_ll_data *cld);
+int omap_cm_init(void);
+int omap2_cm_base_init(void);
# endif
.wait_module_ready = &omap2xxx_cm_wait_module_ready,
};
-int __init omap2xxx_cm_init(void)
+int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data)
{
return cm_register(&omap2xxx_cm_ll_data);
}
extern void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core,
u32 mdm);
-extern int __init omap2xxx_cm_init(void);
+int __init omap2xxx_cm_init(const struct omap_prcm_init_data *data);
#endif
.module_disable = &am33xx_cm_module_disable,
};
-int __init am33xx_cm_init(void)
+int __init am33xx_cm_init(const struct omap_prcm_init_data *data)
{
return cm_register(&am33xx_cm_ll_data);
}
#include "cm.h"
#include "cm-regbits-33xx.h"
+#include "prcm-common.h"
/* CM base address */
#define AM33XX_CM_BASE 0x44e00000
#ifndef __ASSEMBLER__
-int am33xx_cm_init(void);
+int am33xx_cm_init(const struct omap_prcm_init_data *data);
#endif /* ASSEMBLER */
#endif
.wait_module_ready = &omap3xxx_cm_wait_module_ready,
};
-int __init omap3xxx_cm_init(void)
+int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data)
{
+ omap2_clk_legacy_provider_init(TI_CLKM_CM, cm_base + OMAP3430_IVA2_MOD);
return cm_register(&omap3xxx_cm_ll_data);
}
extern void omap3_cm_restore_context(void);
extern void omap3_cm_save_scratchpad_contents(u32 *ptr);
-extern int __init omap3xxx_cm_init(void);
+int __init omap3xxx_cm_init(const struct omap_prcm_init_data *data);
#endif
#define OMAP4_CM_CLKSTCTRL 0x0000
#define OMAP4_CM_STATICDEP 0x0004
-void omap_cm_base_init(void);
-int omap4_cm_init(void);
+int omap4_cm_init(const struct omap_prcm_init_data *data);
#endif
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/bug.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "cm2xxx.h"
#include "cm3xxx.h"
+#include "cm33xx.h"
#include "cm44xx.h"
+#include "clock.h"
/*
* cm_ll_data: function pointers to SoC-specific implementations of
/* cm2_base: base virtual address of the CM2 IP block (OMAP44xx only) */
void __iomem *cm2_base;
+#define CM_NO_CLOCKS 0x1
+#define CM_SINGLE_INSTANCE 0x2
+
/**
* omap2_set_globals_cm - set the CM/CM2 base addresses (for early use)
* @cm: CM base virtual address
return 0;
}
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX)
+static struct omap_prcm_init_data cm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .init = omap4_cm_init,
+};
+
+static struct omap_prcm_init_data cm2_data __initdata = {
+ .index = TI_CLKM_CM2,
+ .init = omap4_cm_init,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2
+static struct omap_prcm_init_data omap2_prcm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .init = omap2xxx_cm_init,
+ .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap_prcm_init_data omap3_cm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .init = omap3xxx_cm_init,
+ .flags = CM_SINGLE_INSTANCE,
+
+ /*
+ * IVA2 offset is a negative value, must offset the cm_base address
+ * by this to get it to positive side on the iomap
+ */
+ .offset = -OMAP3430_IVA2_MOD,
+};
+#endif
+
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX)
+static struct omap_prcm_init_data am3_prcm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+ .init = am33xx_cm_init,
+};
+#endif
+
+#ifdef CONFIG_SOC_AM43XX
+static struct omap_prcm_init_data am4_prcm_data __initdata = {
+ .index = TI_CLKM_CM,
+ .flags = CM_NO_CLOCKS | CM_SINGLE_INSTANCE,
+ .init = omap4_cm_init,
+};
+#endif
+
+static const struct of_device_id omap_cm_dt_match_table[] __initconst = {
+#ifdef CONFIG_ARCH_OMAP2
+ { .compatible = "ti,omap2-prcm", .data = &omap2_prcm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ { .compatible = "ti,omap3-cm", .data = &omap3_cm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ { .compatible = "ti,omap4-cm1", .data = &cm_data },
+ { .compatible = "ti,omap4-cm2", .data = &cm2_data },
+#endif
+#ifdef CONFIG_SOC_OMAP5
+ { .compatible = "ti,omap5-cm-core-aon", .data = &cm_data },
+ { .compatible = "ti,omap5-cm-core", .data = &cm2_data },
+#endif
+#ifdef CONFIG_SOC_DRA7XX
+ { .compatible = "ti,dra7-cm-core-aon", .data = &cm_data },
+ { .compatible = "ti,dra7-cm-core", .data = &cm2_data },
+#endif
+#ifdef CONFIG_SOC_AM33XX
+ { .compatible = "ti,am3-prcm", .data = &am3_prcm_data },
+#endif
+#ifdef CONFIG_SOC_AM43XX
+ { .compatible = "ti,am4-prcm", .data = &am4_prcm_data },
+#endif
+#ifdef CONFIG_SOC_TI81XX
+ { .compatible = "ti,dm814-prcm", .data = &am3_prcm_data },
+ { .compatible = "ti,dm816-prcm", .data = &am3_prcm_data },
+#endif
+ { }
+};
+
+/**
+ * omap2_cm_base_init - initialize iomappings for the CM drivers
+ *
+ * Detects and initializes the iomappings for the CM driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_cm_base_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ struct omap_prcm_init_data *data;
+ void __iomem *mem;
+
+ for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
+ data = (struct omap_prcm_init_data *)match->data;
+
+ mem = of_iomap(np, 0);
+ if (!mem)
+ return -ENOMEM;
+
+ if (data->index == TI_CLKM_CM)
+ cm_base = mem + data->offset;
+
+ if (data->index == TI_CLKM_CM2)
+ cm2_base = mem + data->offset;
+
+ data->mem = mem;
+
+ data->np = np;
+
+ if (data->init && (data->flags & CM_SINGLE_INSTANCE ||
+ (cm_base && cm2_base)))
+ data->init(data);
+ }
+
+ return 0;
+}
+
+/**
+ * omap_cm_init - low level init for the CM drivers
+ *
+ * Initializes the low level clock infrastructure for CM drivers.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_cm_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ const struct omap_prcm_init_data *data;
+ int ret;
+
+ for_each_matching_node_and_match(np, omap_cm_dt_match_table, &match) {
+ data = match->data;
+
+ if (data->flags & CM_NO_CLOCKS)
+ continue;
+
+ ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
* Populates the base addresses of the _cm_bases
* array used for read/write of cm module registers.
*/
-void omap_cm_base_init(void)
+static void omap_cm_base_init(void)
{
_cm_bases[OMAP4430_PRM_PARTITION] = prm_base;
_cm_bases[OMAP4430_CM1_PARTITION] = cm_base;
.module_disable = &omap4_cminst_module_disable,
};
-int __init omap4_cm_init(void)
+int __init omap4_cm_init(const struct omap_prcm_init_data *data)
{
+ omap_cm_base_init();
+
return cm_register(&omap4xxx_cm_ll_data);
}
void __init omap_reserve(void)
{
omap_secure_ram_reserve_memblock();
- omap_barrier_reserve_memblock();
}
void __init omap5_map_io(void);
void __init ti81xx_map_io(void);
-/* omap_barriers_init() is OMAP4 only */
-void omap_barriers_init(void);
-
/**
* omap_test_timeout - busy-loop, testing a condition
* @cond: condition to test until it evaluates to true
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
#include "soc.h"
#include "iomap.h"
#include "sdrc.h"
#include "pm.h"
#include "control.h"
+#include "clock.h"
/* Used by omap3_ctrl_save_padconf() */
#define START_PADCONF_SAVE 0x2
#define PADCONF_SAVE_DONE 0x1
static void __iomem *omap2_ctrl_base;
-static void __iomem *omap4_ctrl_pad_base;
+static s16 omap2_ctrl_offset;
+static struct regmap *omap2_ctrl_syscon;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
struct omap3_scratchpad {
static struct omap3_control_regs control_context;
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
-#define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
-#define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg))
-
-void __init omap2_set_globals_control(void __iomem *ctrl,
- void __iomem *ctrl_pad)
+void __init omap2_set_globals_control(void __iomem *ctrl)
{
omap2_ctrl_base = ctrl;
- omap4_ctrl_pad_base = ctrl_pad;
-}
-
-void __iomem *omap_ctrl_base_get(void)
-{
- return omap2_ctrl_base;
}
u8 omap_ctrl_readb(u16 offset)
{
- return readb_relaxed(OMAP_CTRL_REGADDR(offset));
+ u32 val;
+ u8 byte_offset = offset & 0x3;
+
+ val = omap_ctrl_readl(offset);
+
+ return (val >> (byte_offset * 8)) & 0xff;
}
u16 omap_ctrl_readw(u16 offset)
{
- return readw_relaxed(OMAP_CTRL_REGADDR(offset));
+ u32 val;
+ u16 byte_offset = offset & 0x2;
+
+ val = omap_ctrl_readl(offset);
+
+ return (val >> (byte_offset * 8)) & 0xffff;
}
u32 omap_ctrl_readl(u16 offset)
{
- return readl_relaxed(OMAP_CTRL_REGADDR(offset));
+ u32 val;
+
+ offset &= 0xfffc;
+ if (!omap2_ctrl_syscon)
+ val = readl_relaxed(omap2_ctrl_base + offset);
+ else
+ regmap_read(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+ &val);
+
+ return val;
}
void omap_ctrl_writeb(u8 val, u16 offset)
{
- writeb_relaxed(val, OMAP_CTRL_REGADDR(offset));
+ u32 tmp;
+ u8 byte_offset = offset & 0x3;
+
+ tmp = omap_ctrl_readl(offset);
+
+ tmp &= 0xffffffff ^ (0xff << (byte_offset * 8));
+ tmp |= val << (byte_offset * 8);
+
+ omap_ctrl_writel(tmp, offset);
}
void omap_ctrl_writew(u16 val, u16 offset)
{
- writew_relaxed(val, OMAP_CTRL_REGADDR(offset));
-}
+ u32 tmp;
+ u8 byte_offset = offset & 0x2;
-void omap_ctrl_writel(u32 val, u16 offset)
-{
- writel_relaxed(val, OMAP_CTRL_REGADDR(offset));
-}
+ tmp = omap_ctrl_readl(offset);
-/*
- * On OMAP4 control pad are not addressable from control
- * core base. So the common omap_ctrl_read/write APIs breaks
- * Hence export separate APIs to manage the omap4 pad control
- * registers. This APIs will work only for OMAP4
- */
+ tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8));
+ tmp |= val << (byte_offset * 8);
-u32 omap4_ctrl_pad_readl(u16 offset)
-{
- return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
+ omap_ctrl_writel(tmp, offset);
}
-void omap4_ctrl_pad_writel(u32 val, u16 offset)
+void omap_ctrl_writel(u32 val, u16 offset)
{
- writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
+ offset &= 0xfffc;
+ if (!omap2_ctrl_syscon)
+ writel_relaxed(val, omap2_ctrl_base + offset);
+ else
+ regmap_write(omap2_ctrl_syscon, omap2_ctrl_offset + offset,
+ val);
}
#ifdef CONFIG_ARCH_OMAP3
omap3_ctrl_setup_d2d_padconf();
}
#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
+struct control_init_data {
+ int index;
+ s16 offset;
+};
+
+static struct control_init_data ctrl_data = {
+ .index = TI_CLKM_CTRL,
+};
+
+static const struct control_init_data omap2_ctrl_data = {
+ .index = TI_CLKM_CTRL,
+ .offset = -OMAP2_CONTROL_GENERAL,
+};
+
+static const struct of_device_id omap_scrm_dt_match_table[] = {
+ { .compatible = "ti,am3-scm", .data = &ctrl_data },
+ { .compatible = "ti,am4-scm", .data = &ctrl_data },
+ { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data },
+ { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data },
+ { .compatible = "ti,dm816-scrm", .data = &ctrl_data },
+ { .compatible = "ti,omap4-scm-core", .data = &ctrl_data },
+ { .compatible = "ti,omap5-scm-core", .data = &ctrl_data },
+ { .compatible = "ti,dra7-scm-core", .data = &ctrl_data },
+ { }
+};
+
+/**
+ * omap2_control_base_init - initialize iomappings for the control driver
+ *
+ * Detects and initializes the iomappings for the control driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_control_base_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ struct control_init_data *data;
+
+ for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+ data = (struct control_init_data *)match->data;
+
+ omap2_ctrl_base = of_iomap(np, 0);
+ if (!omap2_ctrl_base)
+ return -ENOMEM;
+
+ omap2_ctrl_offset = data->offset;
+ }
+
+ return 0;
+}
+
+/**
+ * omap_control_init - low level init for the control driver
+ *
+ * Initializes the low level clock infrastructure for control driver.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_control_init(void)
+{
+ struct device_node *np, *scm_conf;
+ const struct of_device_id *match;
+ const struct omap_prcm_init_data *data;
+ int ret;
+ struct regmap *syscon;
+
+ for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) {
+ data = match->data;
+
+ /*
+ * Check if we have scm_conf node, if yes, use this to
+ * access clock registers.
+ */
+ scm_conf = of_get_child_by_name(np, "scm_conf");
+
+ if (scm_conf) {
+ syscon = syscon_node_to_regmap(scm_conf);
+
+ if (IS_ERR(syscon))
+ return PTR_ERR(syscon);
+
+ omap2_ctrl_syscon = syscon;
+
+ if (of_get_child_by_name(scm_conf, "clocks")) {
+ ret = omap2_clk_provider_init(scm_conf,
+ data->index,
+ syscon, NULL);
+ if (ret)
+ return ret;
+ }
+
+ iounmap(omap2_ctrl_base);
+ omap2_ctrl_base = NULL;
+ } else {
+ /* No scm_conf found, direct access */
+ ret = omap2_clk_provider_init(np, data->index, NULL,
+ omap2_ctrl_base);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * omap3_control_legacy_iomap_init - legacy iomap init for clock providers
+ *
+ * Legacy iomap init for clock provider. Needed only by legacy boot mode,
+ * where the base addresses are not parsed from DT, but still required
+ * by the clock driver to be setup properly.
+ */
+void __init omap3_control_legacy_iomap_init(void)
+{
+ omap2_clk_legacy_provider_init(TI_CLKM_SCRM, omap2_ctrl_base);
+}
#ifndef __ASSEMBLY__
#ifdef CONFIG_ARCH_OMAP2PLUS
-extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
extern u32 omap_ctrl_readl(u16 offset);
-extern u32 omap4_ctrl_pad_readl(u16 offset);
extern void omap_ctrl_writeb(u8 val, u16 offset);
extern void omap_ctrl_writew(u16 val, u16 offset);
extern void omap_ctrl_writel(u32 val, u16 offset);
-extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
extern void omap3_save_scratchpad_contents(void);
extern void omap3_clear_scratchpad_contents(void);
extern void omap3630_ctrl_disable_rta(void);
extern int omap3_ctrl_save_padconf(void);
void omap3_ctrl_init(void);
-extern void omap2_set_globals_control(void __iomem *ctrl,
- void __iomem *ctrl_pad);
+int omap2_control_base_init(void);
+int omap_control_init(void);
+void omap2_set_globals_control(void __iomem *ctrl);
+void __init omap3_control_legacy_iomap_init(void);
#else
-#define omap_ctrl_base_get() 0
#define omap_ctrl_readb(x) 0
#define omap_ctrl_readw(x) 0
#define omap_ctrl_readl(x) 0
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include <video/omapdss.h>
#include "omap_hwmod.h"
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
+#define OMAP4_DSIPHY_SYSCON_OFFSET 0x78
+
+static struct regmap *omap4_dsi_mux_syscon;
+
static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
{
u32 enable_mask, enable_shift;
return -ENODEV;
}
- reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+ regmap_read(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, ®);
reg &= ~enable_mask;
reg &= ~pipd_mask;
reg |= (lanes << enable_shift) & enable_mask;
reg |= (lanes << pipd_shift) & pipd_mask;
- omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+ regmap_write(omap4_dsi_mux_syscon, OMAP4_DSIPHY_SYSCON_OFFSET, reg);
return 0;
}
return r;
}
+ /* add DSI info for omap4 */
+ node = of_find_node_by_name(NULL, "omap4_padconf_global");
+ if (node)
+ omap4_dsi_mux_syscon = syscon_node_to_regmap(node);
+
return 0;
}
int omap_type(void)
{
- u32 val = 0;
+ static u32 val = OMAP2_DEVICETYPE_MASK;
+
+ if (val < OMAP2_DEVICETYPE_MASK)
+ return val;
if (cpu_is_omap24xx()) {
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
void __init omap4_map_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
- omap_barriers_init();
}
#endif
void __init omap5_map_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
- omap_barriers_init();
}
#endif
/*
omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE), NULL);
+ omap2_control_base_init();
omap2xxx_check_revision();
- omap2xxx_prm_init();
- omap2xxx_cm_init();
+ omap2_prcm_base_init();
omap2xxx_voltagedomains_init();
omap242x_powerdomains_init();
omap242x_clockdomains_init();
omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE), NULL);
+ omap2_control_base_init();
omap2xxx_check_revision();
- omap2xxx_prm_init();
- omap2xxx_cm_init();
+ omap2_prcm_base_init();
omap2xxx_voltagedomains_init();
omap243x_powerdomains_init();
omap243x_clockdomains_init();
omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE), NULL);
+ /* XXX: remove these once OMAP3 is DT only */
+ if (!of_have_populated_dt()) {
+ omap2_set_globals_control(
+ OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE));
+ omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE));
+ omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+ NULL);
+ }
+ omap2_control_base_init();
omap3xxx_check_revision();
omap3xxx_check_features();
- omap3xxx_prm_init();
- omap3xxx_cm_init();
+ omap2_prcm_base_init();
+ /* XXX: remove these once OMAP3 is DT only */
+ if (!of_have_populated_dt()) {
+ omap3xxx_prm_init(NULL);
+ omap3xxx_cm_init(NULL);
+ }
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
if (!of_have_populated_dt()) {
- omap3_prcm_legacy_iomaps_init();
+ omap3_control_legacy_iomap_init();
if (soc_is_am35xx())
omap_clk_soc_init = am35xx_clk_legacy_init;
else if (cpu_is_omap3630())
{
omap2_set_globals_tap(TI814X_CLASS,
OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
+ omap2_control_base_init();
omap3xxx_check_revision();
ti81xx_check_features();
- am33xx_prm_init();
- am33xx_cm_init();
+ omap2_prcm_base_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
ti81xx_clockdomains_init();
{
omap2_set_globals_tap(TI816X_CLASS,
OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(TI81XX_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(TI81XX_PRCM_BASE), NULL);
+ omap2_control_base_init();
omap3xxx_check_revision();
ti81xx_check_features();
- am33xx_prm_init();
- am33xx_cm_init();
+ omap2_prcm_base_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
ti81xx_clockdomains_init();
{
omap2_set_globals_tap(AM335X_CLASS,
AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
- omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE));
- omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
+ omap2_control_base_init();
omap3xxx_check_revision();
am33xx_check_features();
- am33xx_prm_init();
- am33xx_cm_init();
+ omap2_prcm_base_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
am33xx_hwmod_init();
{
omap2_set_globals_tap(AM335X_CLASS,
AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
- omap2_set_globals_control(AM33XX_L4_WK_IO_ADDRESS(AM33XX_CTRL_BASE),
- NULL);
- omap2_set_globals_prm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE));
- omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
- omap_prm_base_init();
- omap_cm_base_init();
+ omap2_control_base_init();
omap3xxx_check_revision();
am33xx_check_features();
- omap44xx_prm_init();
- omap4_cm_init();
+ omap2_prcm_base_init();
am43xx_powerdomains_init();
am43xx_clockdomains_init();
am43xx_hwmod_init();
{
omap2_set_globals_tap(OMAP443X_CLASS,
OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE));
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
- omap_prm_base_init();
- omap_cm_base_init();
+ omap2_control_base_init();
omap4xxx_check_revision();
omap4xxx_check_features();
- omap4_cm_init();
+ omap2_prcm_base_init();
omap4_pm_init_early();
- omap44xx_prm_init();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
{
omap2_set_globals_tap(OMAP54XX_CLASS,
OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP54XX_CTRL_BASE));
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_AON_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+ omap2_control_base_init();
omap4_pm_init_early();
- omap_prm_base_init();
- omap_cm_base_init();
- omap44xx_prm_init();
+ omap2_prcm_base_init();
omap5xxx_check_revision();
- omap4_cm_init();
omap54xx_voltagedomains_init();
omap54xx_powerdomains_init();
omap54xx_clockdomains_init();
void __init dra7xx_init_early(void)
{
omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
- omap2_set_globals_control(OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE),
- OMAP2_L4_IO_ADDRESS(DRA7XX_CTRL_BASE));
- omap2_set_globals_prm(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRM_BASE));
- omap2_set_globals_cm(OMAP2_L4_IO_ADDRESS(DRA7XX_CM_CORE_AON_BASE),
- OMAP2_L4_IO_ADDRESS(OMAP54XX_CM_CORE_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
+ omap2_control_base_init();
omap4_pm_init_early();
- omap_prm_base_init();
- omap_cm_base_init();
- omap44xx_prm_init();
+ omap2_prcm_base_init();
dra7xxx_check_revision();
- omap4_cm_init();
dra7xx_powerdomains_init();
dra7xx_clockdomains_init();
dra7xx_hwmod_init();
ti_clk_init_features();
if (of_have_populated_dt()) {
- ret = of_prcm_init();
+ ret = omap_control_init();
+ if (ret)
+ return ret;
+
+ ret = omap_prcm_init();
if (ret)
return ret;
struct omap_mux *entry;
#ifdef CONFIG_OMAP_MUX
- if (!superset->muxnames || !superset->muxnames[0]) {
+ if (!superset->muxnames[0]) {
superset++;
continue;
}
extern u32 rx51_secure_update_aux_cr(u32 set_bits, u32 clear_bits);
extern u32 rx51_secure_rng_call(u32 ptr, u32 count, u32 flag);
-#ifdef CONFIG_OMAP4_ERRATA_I688
-extern int omap_barrier_reserve_memblock(void);
-#else
-static inline void omap_barrier_reserve_memblock(void)
-{ }
-#endif
-
#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
void set_cntfreq(void);
#else
#define IRQ_LOCALTIMER 29
-#ifdef CONFIG_OMAP4_ERRATA_I688
-/* Used to implement memory barrier on DRAM path */
-#define OMAP4_DRAM_BARRIER_VA 0xfe600000
-
-void __iomem *dram_sync, *sram_sync;
-
-static phys_addr_t paddr;
-static u32 size;
-
-void omap_bus_sync(void)
-{
- if (dram_sync && sram_sync) {
- writel_relaxed(readl_relaxed(dram_sync), dram_sync);
- writel_relaxed(readl_relaxed(sram_sync), sram_sync);
- isb();
- }
-}
-EXPORT_SYMBOL(omap_bus_sync);
-
-static int __init omap4_sram_init(void)
-{
- struct device_node *np;
- struct gen_pool *sram_pool;
-
- np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
- if (!np)
- pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",
- __func__);
- sram_pool = of_get_named_gen_pool(np, "sram", 0);
- if (!sram_pool)
- pr_warn("%s:Unable to get sram pool needed to handle errata I688\n",
- __func__);
- else
- sram_sync = (void *)gen_pool_alloc(sram_pool, PAGE_SIZE);
-
- return 0;
-}
-omap_arch_initcall(omap4_sram_init);
-
-/* Steal one page physical memory for barrier implementation */
-int __init omap_barrier_reserve_memblock(void)
-{
-
- size = ALIGN(PAGE_SIZE, SZ_1M);
- paddr = arm_memblock_steal(size, SZ_1M);
-
- return 0;
-}
-
-void __init omap_barriers_init(void)
-{
- struct map_desc dram_io_desc[1];
-
- dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
- dram_io_desc[0].pfn = __phys_to_pfn(paddr);
- dram_io_desc[0].length = size;
- dram_io_desc[0].type = MT_MEMORY_RW_SO;
- iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc));
- dram_sync = (void __iomem *) dram_io_desc[0].virtual;
-
- pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
- (long long) paddr, dram_io_desc[0].virtual);
-
-}
-#else
-void __init omap_barriers_init(void)
-{}
-#endif
-
void gic_dist_disable(void)
{
if (gic_dist_base_addr)
/* Clear old wake-up events */
/* REVISIT: These write to reserved bits? */
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
- omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
clk_enable(osc_ck);
/* clear CORE wake-up events */
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
- omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
+ omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
/* MPU domain wake events */
- omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
- 0x1);
+ omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x1);
- omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
- 0x20);
+ omap_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET, 0x20);
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
* it is in retention mode. */
if (omap2_allow_mpu_retention()) {
/* REVISIT: These write to reserved bits? */
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
- omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
- omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+ omap_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+ omap_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
/* Try to enter MPU retention */
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
{
int c;
- c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
- ~(OMAP3430_ST_IO_MASK |
- OMAP3430_ST_IO_CHAIN_MASK));
+ c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK);
return c ? IRQ_HANDLED : IRQ_NONE;
}
* these are handled in a separate handler to avoid acking
* IO events before parsing in mux code
*/
- c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
- OMAP3430_ST_IO_MASK |
- OMAP3430_ST_IO_CHAIN_MASK);
- c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
- c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+ c = omap_prm_clear_mod_irqs(WKUP_MOD, 1, ~(OMAP3430_ST_IO_MASK |
+ OMAP3430_ST_IO_CHAIN_MASK));
+ c += omap_prm_clear_mod_irqs(CORE_MOD, 1, ~0);
+ c += omap_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, ~0);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
- c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+ c += omap_prm_clear_mod_irqs(CORE_MOD, 3, ~0);
+ c += omap_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, ~0);
}
return c ? IRQ_HANDLED : IRQ_NONE;
.priority = _priority \
}
+/**
+ * struct omap_prcm_init_data - PRCM driver init data
+ * @index: clock memory mapping index to be used
+ * @mem: IO mem pointer for this module
+ * @offset: module base address offset from the IO base
+ * @flags: PRCM module init flags
+ * @device_inst_offset: device instance offset within the module address space
+ * @init: low level PRCM init function for this module
+ * @np: device node for this PRCM module
+ */
+struct omap_prcm_init_data {
+ int index;
+ void __iomem *mem;
+ s16 offset;
+ u16 flags;
+ s32 device_inst_offset;
+ int (*init)(const struct omap_prcm_init_data *data);
+ struct device_node *np;
+};
+
extern void omap_prcm_irq_cleanup(void);
extern int omap_prcm_register_chain_handler(
struct omap_prcm_irq_setup *irq_setup);
extern void __iomem *prm_base;
extern u16 prm_features;
extern void omap2_set_globals_prm(void __iomem *prm);
-int of_prcm_init(void);
-void omap3_prcm_legacy_iomaps_init(void);
+int omap_prcm_init(void);
+int omap2_prm_base_init(void);
+int omap2_prcm_base_init(void);
# endif
/*
*
* PRM_HAS_IO_WAKEUP: has IO wakeup capability
* PRM_HAS_VOLTAGE: has voltage domains
+ * PRM_IRQ_DEFAULT: use default irq number for PRM irq
*/
-#define PRM_HAS_IO_WAKEUP (1 << 0)
-#define PRM_HAS_VOLTAGE (1 << 1)
+#define PRM_HAS_IO_WAKEUP BIT(0)
+#define PRM_HAS_VOLTAGE BIT(1)
+#define PRM_IRQ_DEFAULT BIT(2)
/*
* MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
int (*is_hardreset_asserted)(u8 shift, u8 part, s16 prm_mod,
u16 offset);
void (*reset_system)(void);
+ int (*clear_mod_irqs)(s16 module, u8 regs, u32 wkst_mask);
+ u32 (*vp_check_txdone)(u8 vp_id);
+ void (*vp_clear_txdone)(u8 vp_id);
};
extern int prm_register(struct prm_ll_data *pld);
void omap_prm_reset_system(void);
void omap_prm_reconfigure_io_chain(void);
+int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
+
+/*
+ * Voltage Processor (VP) identifiers
+ */
+#define OMAP3_VP_VDD_MPU_ID 0
+#define OMAP3_VP_VDD_CORE_ID 1
+#define OMAP4_VP_VDD_CORE_ID 0
+#define OMAP4_VP_VDD_IVA_ID 1
+#define OMAP4_VP_VDD_MPU_ID 2
+
+u32 omap_prm_vp_check_txdone(u8 vp_id);
+void omap_prm_vp_clear_txdone(u8 vp_id);
#endif
* Clears wakeup status bits for a given module, so that the device can
* re-enter idle.
*/
-void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+static int omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
{
u32 wkst;
wkst = omap2_prm_read_mod_reg(module, regs);
wkst &= wkst_mask;
omap2_prm_write_mod_reg(wkst, module, regs);
+ return 0;
}
int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
.deassert_hardreset = &omap2_prm_deassert_hardreset,
.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
.reset_system = &omap2xxx_prm_dpll_reset,
+ .clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs,
};
-int __init omap2xxx_prm_init(void)
+int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data)
{
return prm_register(&omap2xxx_prm_ll_data);
}
extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
-void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
-
-extern int __init omap2xxx_prm_init(void);
+int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data);
#endif
.reset_system = am33xx_prm_global_warm_sw_reset,
};
-int __init am33xx_prm_init(void)
+int __init am33xx_prm_init(const struct omap_prcm_init_data *data)
{
return prm_register(&am33xx_prm_ll_data);
}
#define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
#ifndef __ASSEMBLER__
-int am33xx_prm_init(void);
+int am33xx_prm_init(const struct omap_prcm_init_data *data);
#endif /* ASSEMBLER */
#endif
#include "prm-regbits-34xx.h"
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+#include "clock.h"
static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
static void omap3xxx_prm_ocp_barrier(void);
#define MAX_VP_ID ARRAY_SIZE(omap3_vp);
-u32 omap3_prm_vp_check_txdone(u8 vp_id)
+static u32 omap3_prm_vp_check_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
u32 irqstatus;
return irqstatus & vp->tranxdone_status;
}
-void omap3_prm_vp_clear_txdone(u8 vp_id)
+static void omap3_prm_vp_clear_txdone(u8 vp_id)
{
struct omap3_vp *vp = &omap3_vp[vp_id];
* omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
* @module: PRM module to clear wakeups from
* @regs: register set to clear, 1 or 3
- * @ignore_bits: wakeup status bits to ignore
+ * @wkst_mask: wkst bits to clear
*
* The purpose of this function is to clear any wake-up events latched
* in the PRCM PM_WKST_x registers. It is possible that a wake-up event
* that any peripheral wake-up events occurring while attempting to
* clear the PM_WKST_x are detected and cleared.
*/
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
+static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
{
u32 wkst, fclk, iclk, clken;
u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
wkst = omap2_prm_read_mod_reg(module, wkst_off);
wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
- wkst &= ~ignore_bits;
+ wkst &= wkst_mask;
if (wkst) {
iclk = omap2_cm_read_mod_reg(module, iclk_off);
fclk = omap2_cm_read_mod_reg(module, fclk_off);
omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
omap2_prm_write_mod_reg(wkst, module, wkst_off);
wkst = omap2_prm_read_mod_reg(module, wkst_off);
- wkst &= ~ignore_bits;
+ wkst &= wkst_mask;
c++;
}
omap2_cm_write_mod_reg(iclk, module, iclk_off);
.deassert_hardreset = &omap2_prm_deassert_hardreset,
.is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
.reset_system = &omap3xxx_prm_dpll3_reset,
+ .clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs,
+ .vp_check_txdone = &omap3_prm_vp_check_txdone,
+ .vp_clear_txdone = &omap3_prm_vp_clear_txdone,
};
-int __init omap3xxx_prm_init(void)
+int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data)
{
+ omap2_clk_legacy_provider_init(TI_CLKM_PRM,
+ prm_base + OMAP3430_IVA2_MOD);
if (omap3_has_io_wakeup())
prm_features |= PRM_HAS_IO_WAKEUP;
#ifndef __ASSEMBLER__
-/* OMAP3-specific VP functions */
-u32 omap3_prm_vp_check_txdone(u8 vp_id);
-void omap3_prm_vp_clear_txdone(u8 vp_id);
-
/*
* OMAP3 access functions for voltage controller (VC) and
* voltage proccessor (VP) in the PRM.
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-extern int __init omap3xxx_prm_init(void);
-int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data);
void omap3xxx_prm_iva_idle(void);
void omap3_prm_reset_modem(void);
int omap3xxx_prm_clear_global_cold_reset(void);
},
};
-u32 omap4_prm_vp_check_txdone(u8 vp_id)
+static u32 omap4_prm_vp_check_txdone(u8 vp_id)
{
struct omap4_vp *vp = &omap4_vp[vp_id];
u32 irqstatus;
return irqstatus & vp->tranxdone_status;
}
-void omap4_prm_vp_clear_txdone(u8 vp_id)
+static void omap4_prm_vp_clear_txdone(u8 vp_id)
{
struct omap4_vp *vp = &omap4_vp[vp_id];
.deassert_hardreset = omap4_prminst_deassert_hardreset,
.is_hardreset_asserted = omap4_prminst_is_hardreset_asserted,
.reset_system = omap4_prminst_global_warm_sw_reset,
+ .vp_check_txdone = omap4_prm_vp_check_txdone,
+ .vp_clear_txdone = omap4_prm_vp_clear_txdone,
};
-int __init omap44xx_prm_init(void)
+static const struct omap_prcm_init_data *prm_init_data;
+
+int __init omap44xx_prm_init(const struct omap_prcm_init_data *data)
{
- if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
+ omap_prm_base_init();
+
+ prm_init_data = data;
+
+ if (data->flags & PRM_HAS_IO_WAKEUP)
prm_features |= PRM_HAS_IO_WAKEUP;
- if (!soc_is_dra7xx())
+ if (data->flags & PRM_HAS_VOLTAGE)
prm_features |= PRM_HAS_VOLTAGE;
+ omap4_prminst_set_prm_dev_inst(data->device_inst_offset);
+
return prm_register(&omap44xx_prm_ll_data);
}
-static const struct of_device_id omap_prm_dt_match_table[] = {
- { .compatible = "ti,omap4-prm" },
- { .compatible = "ti,omap5-prm" },
- { .compatible = "ti,dra7-prm" },
- { }
-};
-
static int omap44xx_prm_late_init(void)
{
- struct device_node *np;
int irq_num;
if (!(prm_features & PRM_HAS_IO_WAKEUP))
if (!of_have_populated_dt())
return 0;
- np = of_find_matching_node(NULL, omap_prm_dt_match_table);
-
- if (!np) {
- /* Default loaded up with OMAP4 values */
- if (!cpu_is_omap44xx())
- return 0;
- } else {
- irq_num = of_irq_get(np, 0);
- /*
- * Already have OMAP4 IRQ num. For all other platforms, we need
- * IRQ numbers from DT
- */
- if (irq_num < 0 && !cpu_is_omap44xx()) {
- if (irq_num == -EPROBE_DEFER)
- return irq_num;
-
- /* Have nothing to do */
- return 0;
- }
-
- /* Once OMAP4 DT is filled as well */
- if (irq_num >= 0) {
- omap4_prcm_irq_setup.irq = irq_num;
- omap4_prcm_irq_setup.xlate_irq = NULL;
- }
+ irq_num = of_irq_get(prm_init_data->np, 0);
+ /*
+ * Already have OMAP4 IRQ num. For all other platforms, we need
+ * IRQ numbers from DT
+ */
+ if (irq_num < 0 && !(prm_init_data->flags & PRM_IRQ_DEFAULT)) {
+ if (irq_num == -EPROBE_DEFER)
+ return irq_num;
+
+ /* Have nothing to do */
+ return 0;
+ }
+
+ /* Once OMAP4 DT is filled as well */
+ if (irq_num >= 0) {
+ omap4_prcm_irq_setup.irq = irq_num;
+ omap4_prcm_irq_setup.xlate_irq = NULL;
}
omap44xx_prm_enable_io_wakeup();
#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
#include "prm44xx_54xx.h"
-#include "prcm-common.h"
#include "prm.h"
#define OMAP4430_PRM_BASE 0x4a306000
#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H
#define __ARCH_ARM_MACH_OMAP2_PRM44XX_54XX_H
+#include "prcm-common.h"
+
/* Function prototypes */
#ifndef __ASSEMBLER__
-/* OMAP4/OMAP5-specific VP functions */
-u32 omap4_prm_vp_check_txdone(u8 vp_id);
-void omap4_prm_vp_clear_txdone(u8 vp_id);
-
/*
* OMAP4/OMAP5 access functions for voltage controller (VC) and
* voltage proccessor (VP) in the PRM.
extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-extern int __init omap44xx_prm_init(void);
+int __init omap44xx_prm_init(const struct omap_prcm_init_data *data);
#endif
#define __ARCH_ARM_MACH_OMAP2_PRM54XX_H
#include "prm44xx_54xx.h"
-#include "prcm-common.h"
#include "prm.h"
#define OMAP54XX_PRM_BASE 0x4ae06000
#ifndef __ARCH_ARM_MACH_OMAP2_PRM7XX_H
#define __ARCH_ARM_MACH_OMAP2_PRM7XX_H
-#include "prm44xx_54xx.h"
#include "prcm-common.h"
+#include "prm44xx_54xx.h"
#include "prm.h"
#define DRA7XX_PRM_BASE 0x4ae06000
#include "prm2xxx_3xxx.h"
#include "prm2xxx.h"
#include "prm3xxx.h"
+#include "prm33xx.h"
#include "prm44xx.h"
+#include "prm54xx.h"
+#include "prm7xx.h"
+#include "prcm43xx.h"
#include "common.h"
#include "clock.h"
#include "cm.h"
cpu_relax();
}
+/**
+ * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
+ * @module: PRM module to clear wakeups from
+ * @regs: register to clear
+ * @wkst_mask: wkst bits to clear
+ *
+ * Clears any wakeup events for the module and register set defined.
+ * Uses SoC specific implementation to do the actual wakeup status
+ * clearing.
+ */
+int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+ if (!prm_ll_data->clear_mod_irqs) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask);
+}
+
+/**
+ * omap_prm_vp_check_txdone - check voltage processor TX done status
+ *
+ * Checks if voltage processor transmission has been completed.
+ * Returns non-zero if a transmission has completed, 0 otherwise.
+ */
+u32 omap_prm_vp_check_txdone(u8 vp_id)
+{
+ if (!prm_ll_data->vp_check_txdone) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return 0;
+ }
+
+ return prm_ll_data->vp_check_txdone(vp_id);
+}
+
+/**
+ * omap_prm_vp_clear_txdone - clears voltage processor TX done status
+ *
+ * Clears the status bit for completed voltage processor transmission
+ * returned by prm_vp_check_txdone.
+ */
+void omap_prm_vp_clear_txdone(u8 vp_id)
+{
+ if (!prm_ll_data->vp_clear_txdone) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return;
+ }
+
+ prm_ll_data->vp_clear_txdone(vp_id);
+}
+
/**
* prm_register - register per-SoC low-level data with the PRM
* @pld: low-level per-SoC OMAP PRM data & function pointers to register
return 0;
}
-static const struct of_device_id omap_prcm_dt_match_table[] = {
- { .compatible = "ti,am3-prcm" },
- { .compatible = "ti,am3-scrm" },
- { .compatible = "ti,am4-prcm" },
- { .compatible = "ti,am4-scrm" },
- { .compatible = "ti,dm814-prcm" },
- { .compatible = "ti,dm814-scrm" },
- { .compatible = "ti,dm816-prcm" },
- { .compatible = "ti,dm816-scrm" },
- { .compatible = "ti,omap2-prcm" },
- { .compatible = "ti,omap2-scrm" },
- { .compatible = "ti,omap3-prm" },
- { .compatible = "ti,omap3-cm" },
- { .compatible = "ti,omap3-scrm" },
- { .compatible = "ti,omap4-cm1" },
- { .compatible = "ti,omap4-prm" },
- { .compatible = "ti,omap4-cm2" },
- { .compatible = "ti,omap4-scrm" },
- { .compatible = "ti,omap5-prm" },
- { .compatible = "ti,omap5-cm-core-aon" },
- { .compatible = "ti,omap5-scrm" },
- { .compatible = "ti,omap5-cm-core" },
- { .compatible = "ti,dra7-prm" },
- { .compatible = "ti,dra7-cm-core-aon" },
- { .compatible = "ti,dra7-cm-core" },
- { }
+#ifdef CONFIG_ARCH_OMAP2
+static struct omap_prcm_init_data omap2_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap2xxx_prm_init,
};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap_prcm_init_data omap3_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap3xxx_prm_init,
-static struct clk_hw_omap memmap_dummy_ck = {
- .flags = MEMMAP_ADDRESSING,
+ /*
+ * IVA2 offset is a negative value, must offset the prm_base
+ * address by this to get it to positive
+ */
+ .offset = -OMAP3430_IVA2_MOD,
};
+#endif
-static u32 prm_clk_readl(void __iomem *reg)
-{
- return omap2_clk_readl(&memmap_dummy_ck, reg);
-}
+#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX)
+static struct omap_prcm_init_data am3_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = am33xx_prm_init,
+};
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static struct omap_prcm_init_data omap4_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = OMAP4430_PRM_DEVICE_INST,
+ .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE | PRM_IRQ_DEFAULT,
+};
+#endif
+
+#ifdef CONFIG_SOC_OMAP5
+static struct omap_prcm_init_data omap5_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = OMAP54XX_PRM_DEVICE_INST,
+ .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE,
+};
+#endif
+
+#ifdef CONFIG_SOC_DRA7XX
+static struct omap_prcm_init_data dra7_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = DRA7XX_PRM_DEVICE_INST,
+ .flags = PRM_HAS_IO_WAKEUP,
+};
+#endif
-static void prm_clk_writel(u32 val, void __iomem *reg)
-{
- omap2_clk_writel(val, &memmap_dummy_ck, reg);
-}
+#ifdef CONFIG_SOC_AM43XX
+static struct omap_prcm_init_data am4_prm_data __initdata = {
+ .index = TI_CLKM_PRM,
+ .init = omap44xx_prm_init,
+ .device_inst_offset = AM43XX_PRM_DEVICE_INST,
+};
+#endif
-static struct ti_clk_ll_ops omap_clk_ll_ops = {
- .clk_readl = prm_clk_readl,
- .clk_writel = prm_clk_writel,
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+static struct omap_prcm_init_data scrm_data __initdata = {
+ .index = TI_CLKM_SCRM,
+};
+#endif
+
+static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
+#ifdef CONFIG_SOC_AM33XX
+ { .compatible = "ti,am3-prcm", .data = &am3_prm_data },
+#endif
+#ifdef CONFIG_SOC_AM43XX
+ { .compatible = "ti,am4-prcm", .data = &am4_prm_data },
+#endif
+#ifdef CONFIG_SOC_TI81XX
+ { .compatible = "ti,dm814-prcm", .data = &am3_prm_data },
+ { .compatible = "ti,dm816-prcm", .data = &am3_prm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP2
+ { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+ { .compatible = "ti,omap3-prm", .data = &omap3_prm_data },
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ { .compatible = "ti,omap4-prm", .data = &omap4_prm_data },
+ { .compatible = "ti,omap4-scrm", .data = &scrm_data },
+#endif
+#ifdef CONFIG_SOC_OMAP5
+ { .compatible = "ti,omap5-prm", .data = &omap5_prm_data },
+ { .compatible = "ti,omap5-scrm", .data = &scrm_data },
+#endif
+#ifdef CONFIG_SOC_DRA7XX
+ { .compatible = "ti,dra7-prm", .data = &dra7_prm_data },
+#endif
+ { }
};
-int __init of_prcm_init(void)
+/**
+ * omap2_prm_base_init - initialize iomappings for the PRM driver
+ *
+ * Detects and initializes the iomappings for the PRM driver, based
+ * on the DT data. Returns 0 in success, negative error value
+ * otherwise.
+ */
+int __init omap2_prm_base_init(void)
{
struct device_node *np;
+ const struct of_device_id *match;
+ struct omap_prcm_init_data *data;
void __iomem *mem;
- int memmap_index = 0;
- ti_clk_ll_ops = &omap_clk_ll_ops;
+ for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+ data = (struct omap_prcm_init_data *)match->data;
- for_each_matching_node(np, omap_prcm_dt_match_table) {
mem = of_iomap(np, 0);
- clk_memmaps[memmap_index] = mem;
- ti_dt_clk_init_provider(np, memmap_index);
- memmap_index++;
+ if (!mem)
+ return -ENOMEM;
+
+ if (data->index == TI_CLKM_PRM)
+ prm_base = mem + data->offset;
+
+ data->mem = mem;
+
+ data->np = np;
+
+ if (data->init)
+ data->init(data);
}
return 0;
}
-void __init omap3_prcm_legacy_iomaps_init(void)
+int __init omap2_prcm_base_init(void)
{
- ti_clk_ll_ops = &omap_clk_ll_ops;
+ int ret;
- clk_memmaps[TI_CLKM_CM] = cm_base + OMAP3430_IVA2_MOD;
- clk_memmaps[TI_CLKM_PRM] = prm_base + OMAP3430_IVA2_MOD;
- clk_memmaps[TI_CLKM_SCRM] = omap_ctrl_base_get();
+ ret = omap2_prm_base_init();
+ if (ret)
+ return ret;
+
+ return omap2_cm_base_init();
+}
+
+/**
+ * omap_prcm_init - low level init for the PRCM drivers
+ *
+ * Initializes the low level clock infrastructure for PRCM drivers.
+ * Returns 0 in success, negative error value in failure.
+ */
+int __init omap_prcm_init(void)
+{
+ struct device_node *np;
+ const struct of_device_id *match;
+ const struct omap_prcm_init_data *data;
+ int ret;
+
+ for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) {
+ data = match->data;
+
+ ret = omap2_clk_provider_init(np, data->index, NULL, data->mem);
+ if (ret)
+ return ret;
+ }
+
+ omap_cm_init();
+
+ return 0;
}
static int __init prm_late_init(void)
s32 omap4_prmst_get_prm_dev_inst(void)
{
- if (prm_dev_inst != PRM_INSTANCE_UNKNOWN)
- return prm_dev_inst;
-
- /* This cannot be done way early at boot.. as things are not setup */
- if (cpu_is_omap44xx())
- prm_dev_inst = OMAP4430_PRM_DEVICE_INST;
- else if (soc_is_omap54xx())
- prm_dev_inst = OMAP54XX_PRM_DEVICE_INST;
- else if (soc_is_dra7xx())
- prm_dev_inst = DRA7XX_PRM_DEVICE_INST;
- else if (soc_is_am43xx())
- prm_dev_inst = AM43XX_PRM_DEVICE_INST;
-
return prm_dev_inst;
}
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
+{
+ prm_dev_inst = dev_inst;
+}
+
/* Read a register in a PRM instance */
u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
{
#define PRM_INSTANCE_UNKNOWN -1
extern s32 omap4_prmst_get_prm_dev_inst(void);
+void omap4_prminst_set_prm_dev_inst(s32 dev_inst);
/*
* In an ideal world, we would not export these low-level functions,
#endif /* defined(CONFIG_SMP) && defined(CONFIG_PM) */
-#ifndef CONFIG_OMAP4_ERRATA_I688
ENTRY(omap_bus_sync)
ret lr
ENDPROC(omap_bus_sync)
-#endif
ENTRY(omap_do_wfi)
stmfd sp!, {lr}
struct voltagedomain;
-/*
- * Voltage Processor (VP) identifiers
- */
-#define OMAP3_VP_VDD_MPU_ID 0
-#define OMAP3_VP_VDD_CORE_ID 1
-#define OMAP4_VP_VDD_CORE_ID 0
-#define OMAP4_VP_VDD_IVA_ID 1
-#define OMAP4_VP_VDD_MPU_ID 2
-
/* XXX document */
#define VP_IDLE_TIMEOUT 200
#define VP_TRANXDONE_TIMEOUT 300
#include "prm2xxx_3xxx.h"
static const struct omap_vp_ops omap3_vp_ops = {
- .check_txdone = omap3_prm_vp_check_txdone,
- .clear_txdone = omap3_prm_vp_clear_txdone,
+ .check_txdone = omap_prm_vp_check_txdone,
+ .clear_txdone = omap_prm_vp_clear_txdone,
};
/*
#include "vp.h"
static const struct omap_vp_ops omap4_vp_ops = {
- .check_txdone = omap4_prm_vp_check_txdone,
- .clear_txdone = omap4_prm_vp_clear_txdone,
+ .check_txdone = omap_prm_vp_check_txdone,
+ .clear_txdone = omap_prm_vp_clear_txdone,
};
/*
&pdev->dev);
const struct imx_weim_devtype *devtype = of_id->data;
struct device_node *child;
- int ret;
+ int ret, have_child = 0;
if (devtype == &imx50_weim_devtype) {
ret = imx_weim_gpr_setup(pdev);
continue;
ret = weim_timing_setup(child, base, devtype);
- if (ret) {
- dev_err(&pdev->dev, "%s set timing failed.\n",
+ if (ret)
+ dev_warn(&pdev->dev, "%s set timing failed.\n",
child->full_name);
- return ret;
- }
+ else
+ have_child = 1;
}
- ret = of_platform_populate(pdev->dev.of_node,
+ if (have_child)
+ ret = of_platform_populate(pdev->dev.of_node,
of_default_bus_match_table,
NULL, &pdev->dev);
if (ret)
*
*/
+#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#define OCP2SCP_TIMING 0x18
+#define SYNC2_MASK 0xf
+
static int ocp2scp_remove_devices(struct device *dev, void *c)
{
struct platform_device *pdev = to_platform_device(dev);
static int omap_ocp2scp_probe(struct platform_device *pdev)
{
int ret;
+ u32 reg;
+ void __iomem *regs;
+ struct resource *res;
struct device_node *np = pdev->dev.of_node;
if (np) {
}
pm_runtime_enable(&pdev->dev);
+ /*
+ * As per AM572x TRM: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf
+ * under section 26.3.2.2, table 26-26 OCP2SCP TIMING Caution;
+ * As per OMAP4430 TRM: http://www.ti.com/lit/ug/swpu231ap/swpu231ap.pdf
+ * under section 23.12.6.2.2 , Table 23-1213 OCP2SCP TIMING Caution;
+ * As per OMAP4460 TRM: http://www.ti.com/lit/ug/swpu235ab/swpu235ab.pdf
+ * under section 23.12.6.2.2, Table 23-1213 OCP2SCP TIMING Caution;
+ * As per OMAP543x TRM http://www.ti.com/lit/pdf/swpu249
+ * under section 27.3.2.2, Table 27-27 OCP2SCP TIMING Caution;
+ *
+ * Read path of OCP2SCP is not working properly due to low reset value
+ * of SYNC2 parameter in OCP2SCP. Suggested reset value is 0x6 or more.
+ */
+ if (!of_device_is_compatible(np, "ti,am437x-ocp2scp")) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(regs))
+ goto err0;
+
+ pm_runtime_get_sync(&pdev->dev);
+ reg = readl_relaxed(regs + OCP2SCP_TIMING);
+ reg &= ~(SYNC2_MASK);
+ reg |= 0x6;
+ writel_relaxed(reg, regs + OCP2SCP_TIMING);
+ pm_runtime_put_sync(&pdev->dev);
+ }
return 0;
#ifdef CONFIG_OF
static const struct of_device_id omap_ocp2scp_id_table[] = {
{ .compatible = "ti,omap-ocp2scp" },
+ { .compatible = "ti,am437x-ocp2scp" },
{}
};
MODULE_DEVICE_TABLE(of, omap_ocp2scp_id_table);
ad->control_reg = ti_clk_get_reg_addr(node, 0);
ad->idlest_reg = ti_clk_get_reg_addr(node, 1);
- if (!ad->control_reg || !ad->idlest_reg)
+ if (IS_ERR(ad->control_reg) || IS_ERR(ad->idlest_reg))
goto cleanup;
ad->idlest_mask = 0x1;
ad->autoidle_reg = ti_clk_get_reg_addr(node, 1);
ad->idlest_reg = ti_clk_get_reg_addr(node, 2);
- if (!ad->control_reg || !ad->autoidle_reg || !ad->idlest_reg)
+ if (IS_ERR(ad->control_reg) || IS_ERR(ad->autoidle_reg) ||
+ IS_ERR(ad->idlest_reg))
goto cleanup;
clk = clk_register(NULL, &clk_hw->hw);
clk->name = node->name;
clk->reg = ti_clk_get_reg_addr(node, 0);
- if (!clk->reg) {
+ if (IS_ERR(clk->reg)) {
kfree(clk);
return -EINVAL;
}
* @index: register index from the clock node
*
* Builds clock register address from device tree information. This
- * is a struct of type clk_omap_reg.
+ * is a struct of type clk_omap_reg. Returns a pointer to the register
+ * address, or a pointer error value in failure.
*/
void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index)
{
if (i == CLK_MAX_MEMMAPS) {
pr_err("clk-provider not found for %s!\n", node->name);
- return NULL;
+ return ERR_PTR(-ENOENT);
}
reg->index = i;
if (of_property_read_u32_index(node, "reg", index, &val)) {
pr_err("%s must have reg[%d]!\n", node->name, index);
- return NULL;
+ return ERR_PTR(-EINVAL);
}
reg->offset = val;
u32 val;
*reg = ti_clk_get_reg_addr(node, 0);
- if (!*reg)
- return -EINVAL;
+ if (IS_ERR(*reg))
+ return PTR_ERR(*reg);
if (!of_property_read_u32(node, "ti,bit-shift", &val))
*shift = val;
#endif
} else {
dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
- if (!dd->idlest_reg)
+ if (IS_ERR(dd->idlest_reg))
goto cleanup;
dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
}
- if (!dd->control_reg || !dd->mult_div1_reg)
+ if (IS_ERR(dd->control_reg) || IS_ERR(dd->mult_div1_reg))
goto cleanup;
if (dd->autoidle_mask) {
dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
- if (!dd->autoidle_reg)
+ if (IS_ERR(dd->autoidle_reg))
goto cleanup;
}
if (ops != &omap_gate_clkdm_clk_ops) {
reg = ti_clk_get_reg_addr(node, 0);
- if (!reg)
+ if (IS_ERR(reg))
return;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
return;
gate->enable_reg = ti_clk_get_reg_addr(node, 0);
- if (!gate->enable_reg)
+ if (IS_ERR(gate->enable_reg))
goto cleanup;
of_property_read_u32(node, "ti,bit-shift", &val);
u32 val;
reg = ti_clk_get_reg_addr(node, 0);
- if (!reg)
+ if (IS_ERR(reg))
return;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
reg = ti_clk_get_reg_addr(node, 0);
- if (!reg)
+ if (IS_ERR(reg))
goto cleanup;
of_property_read_u32(node, "ti,bit-shift", &shift);
mux->reg = ti_clk_get_reg_addr(node, 0);
- if (!mux->reg)
+ if (IS_ERR(mux->reg))
goto cleanup;
if (!of_property_read_u32(node, "ti,bit-shift", &val))
obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
+obj-$(CONFIG_SOC_VF610) += irq-vf610-mscm-ir.o
obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
--- /dev/null
+/*
+ * Copyright (C) 2014-2015 Toradex AG
+ * Author: Stefan Agner <stefan@agner.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * IRQ chip driver for MSCM interrupt router available on Vybrid SoC's.
+ * The interrupt router is between the CPU's interrupt controller and the
+ * peripheral. The router allows to route the peripheral interrupts to
+ * one of the two available CPU's on Vybrid VF6xx SoC's (Cortex-A5 or
+ * Cortex-M4). The router will be configured transparently on a IRQ
+ * request.
+ *
+ * o All peripheral interrupts of the Vybrid SoC can be routed to
+ * CPU 0, CPU 1 or both. The routing is useful for dual-core
+ * variants of Vybrid SoC such as VF6xx. This driver routes the
+ * requested interrupt to the CPU currently running on.
+ *
+ * o It is required to setup the interrupt router even on single-core
+ * variants of Vybrid.
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/syscon.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+#include "irqchip.h"
+
+#define MSCM_CPxNUM 0x4
+
+#define MSCM_IRSPRC(n) (0x80 + 2 * (n))
+#define MSCM_IRSPRC_CPEN_MASK 0x3
+
+#define MSCM_IRSPRC_NUM 112
+
+struct vf610_mscm_ir_chip_data {
+ void __iomem *mscm_ir_base;
+ u16 cpu_mask;
+ u16 saved_irsprc[MSCM_IRSPRC_NUM];
+};
+
+static struct vf610_mscm_ir_chip_data *mscm_ir_data;
+
+static inline void vf610_mscm_ir_save(struct vf610_mscm_ir_chip_data *data)
+{
+ int i;
+
+ for (i = 0; i < MSCM_IRSPRC_NUM; i++)
+ data->saved_irsprc[i] = readw_relaxed(data->mscm_ir_base + MSCM_IRSPRC(i));
+}
+
+static inline void vf610_mscm_ir_restore(struct vf610_mscm_ir_chip_data *data)
+{
+ int i;
+
+ for (i = 0; i < MSCM_IRSPRC_NUM; i++)
+ writew_relaxed(data->saved_irsprc[i], data->mscm_ir_base + MSCM_IRSPRC(i));
+}
+
+static int vf610_mscm_ir_notifier(struct notifier_block *self,
+ unsigned long cmd, void *v)
+{
+ switch (cmd) {
+ case CPU_CLUSTER_PM_ENTER:
+ vf610_mscm_ir_save(mscm_ir_data);
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED:
+ case CPU_CLUSTER_PM_EXIT:
+ vf610_mscm_ir_restore(mscm_ir_data);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block mscm_ir_notifier_block = {
+ .notifier_call = vf610_mscm_ir_notifier,
+};
+
+static void vf610_mscm_ir_enable(struct irq_data *data)
+{
+ irq_hw_number_t hwirq = data->hwirq;
+ struct vf610_mscm_ir_chip_data *chip_data = data->chip_data;
+ u16 irsprc;
+
+ irsprc = readw_relaxed(chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+ irsprc &= MSCM_IRSPRC_CPEN_MASK;
+
+ WARN_ON(irsprc & ~chip_data->cpu_mask);
+
+ writew_relaxed(chip_data->cpu_mask,
+ chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+
+ irq_chip_unmask_parent(data);
+}
+
+static void vf610_mscm_ir_disable(struct irq_data *data)
+{
+ irq_hw_number_t hwirq = data->hwirq;
+ struct vf610_mscm_ir_chip_data *chip_data = data->chip_data;
+
+ writew_relaxed(0x0, chip_data->mscm_ir_base + MSCM_IRSPRC(hwirq));
+
+ irq_chip_mask_parent(data);
+}
+
+static struct irq_chip vf610_mscm_ir_irq_chip = {
+ .name = "mscm-ir",
+ .irq_mask = irq_chip_mask_parent,
+ .irq_unmask = irq_chip_unmask_parent,
+ .irq_eoi = irq_chip_eoi_parent,
+ .irq_enable = vf610_mscm_ir_enable,
+ .irq_disable = vf610_mscm_ir_disable,
+ .irq_retrigger = irq_chip_retrigger_hierarchy,
+ .irq_set_affinity = irq_chip_set_affinity_parent,
+};
+
+static int vf610_mscm_ir_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ int i;
+ irq_hw_number_t hwirq;
+ struct of_phandle_args *irq_data = arg;
+ struct of_phandle_args gic_data;
+
+ if (irq_data->args_count != 2)
+ return -EINVAL;
+
+ hwirq = irq_data->args[0];
+ for (i = 0; i < nr_irqs; i++)
+ irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+ &vf610_mscm_ir_irq_chip,
+ domain->host_data);
+
+ gic_data.np = domain->parent->of_node;
+ gic_data.args_count = 3;
+ gic_data.args[0] = GIC_SPI;
+ gic_data.args[1] = irq_data->args[0];
+ gic_data.args[2] = irq_data->args[1];
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &gic_data);
+}
+
+static const struct irq_domain_ops mscm_irq_domain_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .alloc = vf610_mscm_ir_domain_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
+static int __init vf610_mscm_ir_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct irq_domain *domain, *domain_parent;
+ struct regmap *mscm_cp_regmap;
+ int ret, cpuid;
+
+ domain_parent = irq_find_host(parent);
+ if (!domain_parent) {
+ pr_err("vf610_mscm_ir: interrupt-parent not found\n");
+ return -EINVAL;
+ }
+
+ mscm_ir_data = kzalloc(sizeof(*mscm_ir_data), GFP_KERNEL);
+ if (!mscm_ir_data)
+ return -ENOMEM;
+
+ mscm_ir_data->mscm_ir_base = of_io_request_and_map(node, 0, "mscm-ir");
+
+ if (!mscm_ir_data->mscm_ir_base) {
+ pr_err("vf610_mscm_ir: unable to map mscm register\n");
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ mscm_cp_regmap = syscon_regmap_lookup_by_phandle(node, "fsl,cpucfg");
+ if (IS_ERR(mscm_cp_regmap)) {
+ ret = PTR_ERR(mscm_cp_regmap);
+ pr_err("vf610_mscm_ir: regmap lookup for cpucfg failed\n");
+ goto out_unmap;
+ }
+
+ regmap_read(mscm_cp_regmap, MSCM_CPxNUM, &cpuid);
+ mscm_ir_data->cpu_mask = 0x1 << cpuid;
+
+ domain = irq_domain_add_hierarchy(domain_parent, 0,
+ MSCM_IRSPRC_NUM, node,
+ &mscm_irq_domain_ops, mscm_ir_data);
+ if (!domain) {
+ ret = -ENOMEM;
+ goto out_unmap;
+ }
+
+ cpu_pm_register_notifier(&mscm_ir_notifier_block);
+
+ return 0;
+
+out_unmap:
+ iounmap(mscm_ir_data->mscm_ir_base);
+out_free:
+ kfree(mscm_ir_data);
+ return ret;
+}
+IRQCHIP_DECLARE(vf610_mscm_ir, "fsl,vf610-mscm-ir", vf610_mscm_ir_of_init);
#define IMX6QDL_PLL6_BYPASS 235
#define IMX6QDL_PLL7_BYPASS 236
#define IMX6QDL_CLK_GPT_3M 237
-#define IMX6QDL_CLK_END 238
+#define IMX6QDL_CLK_VIDEO_27M 238
+#define IMX6QDL_CLK_MIPI_CORE_CFG 239
+#define IMX6QDL_CLK_MIPI_IPG 240
+#define IMX6QDL_CLK_END 241
#endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
.node_name = name, \
}
-/* Maximum number of clock memmaps */
-#define CLK_MAX_MEMMAPS 4
-
/* Static memmap indices */
enum {
TI_CLKM_CM = 0,
+ TI_CLKM_CM2,
TI_CLKM_PRM,
TI_CLKM_SCRM,
+ TI_CLKM_CTRL,
+ CLK_MAX_MEMMAPS
};
typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU1_DI1 (0x1 << 6)
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI0 (0x2 << 6)
#define IMX6Q_GPR3_LVDS0_MUX_CTL_IPU2_DI1 (0x3 << 6)
+#define IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT 4
#define IMX6Q_GPR3_MIPI_MUX_CTL_MASK (0x3 << 4)
#define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI0 (0x0 << 4)
#define IMX6Q_GPR3_MIPI_MUX_CTL_IPU1_DI1 (0x1 << 4)
projects / karo-tx-linux.git / commitdiff