/*
* Disable spring, enable force feedback.
- * FIXME: We should use iforce_set_autocenter() et al here.
*/
-
- iforce_send_packet(iforce, FF_CMD_AUTOCENTER, "\004\000");
+ iforce_set_autocenter(input_dev, 0);
/*
* Find appropriate device entry
int iforce_get_id_packet(struct iforce *iforce, char *packet)
{
+ int status;
+
switch (iforce->bus) {
case IFORCE_USB:
iforce->cr.bRequest = packet[0];
iforce->ctrl->dev = iforce->usbdev;
- if (usb_submit_urb(iforce->ctrl, GFP_ATOMIC))
+ status = usb_submit_urb(iforce->ctrl, GFP_ATOMIC);
+ if (status) {
+ err("usb_submit_urb failed %d", status);
return -1;
+ }
wait_event_interruptible_timeout(iforce->wait,
iforce->ctrl->status != -EINPROGRESS, HZ);
if (iforce->ctrl->status) {
+ dbg("iforce->ctrl->status = %d", iforce->ctrl->status);
usb_unlink_urb(iforce->ctrl);
return -1;
}
#else
- err("iforce_get_id_packet: iforce->bus = USB!");
+ dbg("iforce_get_id_packet: iforce->bus = USB!");
#endif
break;
XMIT_INC(iforce->xmit.tail, n);
if ( (n=usb_submit_urb(iforce->out, GFP_ATOMIC)) ) {
+ clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags);
warn("usb_submit_urb failed %d\n", n);
}
usb_fill_int_urb(iforce->irq, dev, usb_rcvintpipe(dev, epirq->bEndpointAddress),
iforce->data, 16, iforce_usb_irq, iforce, epirq->bInterval);
- usb_fill_bulk_urb(iforce->out, dev, usb_sndbulkpipe(dev, epout->bEndpointAddress),
- iforce + 1, 32, iforce_usb_out, iforce);
+ usb_fill_int_urb(iforce->out, dev, usb_sndintpipe(dev, epout->bEndpointAddress),
+ iforce + 1, 32, iforce_usb_out, iforce, epout->bInterval);
usb_fill_control_urb(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0),
(void*) &iforce->cr, iforce->edata, 16, iforce_usb_ctrl, iforce);
#include <linux/mutex.h>
#include <linux/input-polldev.h>
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION("Generic implementation of a polled input device");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1");
+
static DEFINE_MUTEX(polldev_mutex);
static int polldev_users;
static struct workqueue_struct *polldev_wq;
dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);
- for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++);
- *version = (param[0] << 8) | (param[1] << 4) | i;
+ if (version) {
+ for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
+ /* empty */;
+ *version = (param[0] << 8) | (param[1] << 4) | i;
+ }
for (i = 0; i < ARRAY_SIZE(alps_model_data); i++)
- if (!memcmp(param, alps_model_data[i].signature, sizeof(alps_model_data[i].signature)))
+ if (!memcmp(param, alps_model_data[i].signature,
+ sizeof(alps_model_data[i].signature)))
return alps_model_data + i;
return NULL;
return 0;
}
-static int alps_reconnect(struct psmouse *psmouse)
+static int alps_hw_init(struct psmouse *psmouse, int *version)
{
struct alps_data *priv = psmouse->private;
- int version;
-
- psmouse_reset(psmouse);
- if (!(priv->i = alps_get_model(psmouse, &version)))
+ priv->i = alps_get_model(psmouse, version);
+ if (!priv->i)
return -1;
if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
return -1;
if (alps_tap_mode(psmouse, 1)) {
- printk(KERN_WARNING "alps.c: Failed to reenable hardware tapping\n");
+ printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
return -1;
}
if (alps_absolute_mode(psmouse)) {
- printk(KERN_ERR "alps.c: Failed to reenable absolute mode\n");
+ printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
return -1;
}
if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
return -1;
+ /* ALPS needs stream mode, otherwise it won't report any data */
+ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
+ printk(KERN_ERR "alps.c: Failed to enable stream mode\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int alps_reconnect(struct psmouse *psmouse)
+{
+ psmouse_reset(psmouse);
+
+ if (alps_hw_init(psmouse, NULL))
+ return -1;
+
return 0;
}
goto init_fail;
priv->dev2 = dev2;
+ psmouse->private = priv;
- priv->i = alps_get_model(psmouse, &version);
- if (!priv->i)
- goto init_fail;
-
- if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
- goto init_fail;
-
- if (alps_tap_mode(psmouse, 1))
- printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
-
- if (alps_absolute_mode(psmouse)) {
- printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
- goto init_fail;
- }
-
- if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
+ if (alps_hw_init(psmouse, &version))
goto init_fail;
dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY);
/* We are having trouble resyncing ALPS touchpads so disable it for now */
psmouse->resync_time = 0;
- psmouse->private = priv;
return 0;
init_fail:
psmouse_reset(psmouse);
input_free_device(dev2);
kfree(priv);
+ psmouse->private = NULL;
return -1;
}
{ 66, PS2PP_KIND_MX, /* MX3100 reciver */
PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL },
+ { 72, PS2PP_KIND_TRACKMAN, 0 }, /* T-CH11: TrackMan Marble */
{ 73, 0, PS2PP_SIDE_BTN },
{ 75, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 76, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
if INPUT_TOUCHSCREEN
config TOUCHSCREEN_ADS7846
- tristate "ADS 7846/7843 based touchscreens"
+ tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
depends on SPI_MASTER
depends on HWMON = n || HWMON
help
Say Y here if you have a touchscreen interface using the
- ADS7846 or ADS7843 controller, and your board-specific setup
- code includes that in its table of SPI devices.
+ ADS7846/TSC2046 or ADS7843 controller, and your board-specific
+ setup code includes that in its table of SPI devices.
If HWMON is selected, and the driver is told the reference voltage
on your board, you will also get hwmon interfaces for the voltage
- (and on ads7846, temperature) sensors of this chip.
+ (and on ads7846/tsc2046, temperature) sensors of this chip.
If unsure, say N (but it's safe to say "Y").
/*
* This code has been heavily tested on a Nokia 770, and lightly
* tested on other ads7846 devices (OSK/Mistral, Lubbock).
+ * TSC2046 is just newer ads7846 silicon.
* Support for ads7843 tested on Atmel at91sam926x-EK.
* Support for ads7845 has only been stubbed in.
*
* may not. So we stick to very-portable 8 bit words, both RX and TX.
*/
spi->bits_per_word = 8;
- spi->mode = SPI_MODE_1;
+ spi->mode = SPI_MODE_0;
err = spi_setup(spi);
if (err < 0)
return err;
struct ucb1400 *ucb = _ucb;
struct task_struct *tsk = current;
int valid = 0;
+ struct sched_param param = { .sched_priority = 1 };
- tsk->policy = SCHED_FIFO;
- tsk->rt_priority = 1;
+ sched_setscheduler(tsk, SCHED_FIFO, ¶m);
while (!kthread_should_stop()) {
unsigned int x, y, p;
*/
static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
{
- struct adbhid *adbhid = dev->private;
+ struct adbhid *adbhid = input_get_drvdata(dev);
unsigned char leds;
switch (type) {
case EV_LED:
- leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0)
- | (test_bit(LED_NUML, dev->led) ? 1 : 0)
- | (test_bit(LED_CAPSL, dev->led) ? 2 : 0);
- real_leds(leds, adbhid->id);
- return 0;
+ leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) |
+ (test_bit(LED_NUML, dev->led) ? 1 : 0) |
+ (test_bit(LED_CAPSL, dev->led) ? 2 : 0);
+ real_leds(leds, adbhid->id);
+ return 0;
}
return -1;
switch (code) {
case ADB_MSG_PRE_RESET:
case ADB_MSG_POWERDOWN:
- /* Stop the repeat timer. Autopoll is already off at this point */
+ /* Stop the repeat timer. Autopoll is already off at this point */
{
int i;
for (i = 1; i < 16; i++) {
hid->current_handler_id = current_handler_id;
hid->mouse_kind = mouse_kind;
hid->flags = 0;
- input_dev->private = hid;
+ input_set_drvdata(input_dev, hid);
input_dev->name = hid->name;
input_dev->phys = hid->phys;
input_dev->id.bustype = BUS_ADB;
struct ucb1x00_ts *ts = _ts;
struct task_struct *tsk = current;
DECLARE_WAITQUEUE(wait, tsk);
- int valid;
-
- /*
- * We could run as a real-time thread. However, thus far
- * this doesn't seem to be necessary.
- */
-// tsk->policy = SCHED_FIFO;
-// tsk->rt_priority = 1;
-
- valid = 0;
+ int valid = 0;
add_wait_queue(&ts->irq_wait, &wait);
while (!kthread_should_stop()) {