#include <asm/cacheflush.h>
#include <asm/irq_regs.h>
+#include "irq.h"
+
#ifdef CONFIG_SMP
#define SMP_NOP2 "nop; nop;\n\t"
#define SMP_NOP3 "nop; nop; nop;\n\t"
--- /dev/null
+#include <asm/btfixup.h>
+
+BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
+BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
+BTFIXUPDEF_CALL(void, clear_clock_irq, void)
+BTFIXUPDEF_CALL(void, clear_profile_irq, int)
+BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
+
+static inline void disable_pil_irq(unsigned int irq)
+{
+ BTFIXUP_CALL(disable_pil_irq)(irq);
+}
+
+static inline void enable_pil_irq(unsigned int irq)
+{
+ BTFIXUP_CALL(enable_pil_irq)(irq);
+}
+
+static inline void clear_clock_irq(void)
+{
+ BTFIXUP_CALL(clear_clock_irq)();
+}
+
+static inline void clear_profile_irq(int irq)
+{
+ BTFIXUP_CALL(clear_profile_irq)(irq);
+}
+
+static inline void load_profile_irq(int cpu, int limit)
+{
+ BTFIXUP_CALL(load_profile_irq)(cpu, limit);
+}
+
+extern void (*sparc_init_timers)(irq_handler_t lvl10_irq);
+
+extern void claim_ticker14(irq_handler_t irq_handler,
+ int irq,
+ unsigned int timeout);
+
+#ifdef CONFIG_SMP
+BTFIXUPDEF_CALL(void, set_cpu_int, int, int)
+BTFIXUPDEF_CALL(void, clear_cpu_int, int, int)
+BTFIXUPDEF_CALL(void, set_irq_udt, int)
+
+#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level)
+#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level)
+#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu)
+#endif
#include <asm/uaccess.h>
#include <asm/irq_regs.h>
+#include "irq.h"
/*
* I studied different documents and many live PROMs both from 2.30
#include <asm/tlbflush.h>
#include <asm/cpudata.h>
+#include "irq.h"
+
int smp_num_cpus = 1;
volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
unsigned char boot_cpu_id = 0;
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/init.h>
+#include "irq.h"
#include <asm/ptrace.h>
#include <asm/processor.h>
static struct resource sun4c_intr_eb = { "sun4c_intr" };
#endif
+/*
+ * Bit field defines for the interrupt registers on various
+ * Sparc machines.
+ */
+
+/* The sun4c interrupt register. */
+#define SUN4C_INT_ENABLE 0x01 /* Allow interrupts. */
+#define SUN4C_INT_E14 0x80 /* Enable level 14 IRQ. */
+#define SUN4C_INT_E10 0x20 /* Enable level 10 IRQ. */
+#define SUN4C_INT_E8 0x10 /* Enable level 8 IRQ. */
+#define SUN4C_INT_E6 0x08 /* Enable level 6 IRQ. */
+#define SUN4C_INT_E4 0x04 /* Enable level 4 IRQ. */
+#define SUN4C_INT_E1 0x02 /* Enable level 1 IRQ. */
+
/* Pointer to the interrupt enable byte
*
* Dave Redman (djhr@tadpole.co.uk)
#include <asm/cacheflush.h>
#include <asm/irq_regs.h>
+#include "irq.h"
+
/* If you trust current SCSI layer to handle different SCSI IRQs, enable this. I don't trust it... -jj */
/* #define DISTRIBUTE_IRQS */
#include <asm/cacheflush.h>
#include <asm/cpudata.h>
+#include "irq.h"
#define IRQ_CROSS_CALL 15
extern ctxd_t *srmmu_ctx_table_phys;
#include <asm/sbus.h>
#include <asm/cacheflush.h>
+#include "irq.h"
+
+/* On the sun4m, just like the timers, we have both per-cpu and master
+ * interrupt registers.
+ */
+
+/* These registers are used for sending/receiving irqs from/to
+ * different cpu's.
+ */
+struct sun4m_intreg_percpu {
+ unsigned int tbt; /* Interrupts still pending for this cpu. */
+
+ /* These next two registers are WRITE-ONLY and are only
+ * "on bit" sensitive, "off bits" written have NO affect.
+ */
+ unsigned int clear; /* Clear this cpus irqs here. */
+ unsigned int set; /* Set this cpus irqs here. */
+ unsigned char space[PAGE_SIZE - 12];
+};
+
+/*
+ * djhr
+ * Actually the clear and set fields in this struct are misleading..
+ * according to the SLAVIO manual (and the same applies for the SEC)
+ * the clear field clears bits in the mask which will ENABLE that IRQ
+ * the set field sets bits in the mask to DISABLE the IRQ.
+ *
+ * Also the undirected_xx address in the SLAVIO is defined as
+ * RESERVED and write only..
+ *
+ * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
+ * sun4m machines, for MP the layout makes more sense.
+ */
+struct sun4m_intregs {
+ struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
+ unsigned int tbt; /* IRQ's that are still pending. */
+ unsigned int irqs; /* Master IRQ bits. */
+
+ /* Again, like the above, two these registers are WRITE-ONLY. */
+ unsigned int clear; /* Clear master IRQ's by setting bits here. */
+ unsigned int set; /* Set master IRQ's by setting bits here. */
+
+ /* This register is both READ and WRITE. */
+ unsigned int undirected_target; /* Which cpu gets undirected irqs. */
+};
+
static unsigned long dummy;
struct sun4m_intregs *sun4m_interrupts;
unsigned long *irq_rcvreg = &dummy;
+/* Dave Redman (djhr@tadpole.co.uk)
+ * The sun4m interrupt registers.
+ */
+#define SUN4M_INT_ENABLE 0x80000000
+#define SUN4M_INT_E14 0x00000080
+#define SUN4M_INT_E10 0x00080000
+
+#define SUN4M_HARD_INT(x) (0x000000001 << (x))
+#define SUN4M_SOFT_INT(x) (0x000010000 << (x))
+
+#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
+#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
+#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */
+#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */
+#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
+#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
+#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
+#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
+#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
+#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
+#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
+#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
+#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
+#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
+
+#define SUN4M_INT_SBUS(x) (1 << (x+7))
+#define SUN4M_INT_VME(x) (1 << (x))
+
/* These tables only apply for interrupts greater than 15..
*
* any intr value below 0x10 is considered to be a soft-int
#include <asm/oplib.h>
#include <asm/cpudata.h>
+#include "irq.h"
+
#define IRQ_RESCHEDULE 13
#define IRQ_STOP_CPU 14
#define IRQ_CROSS_CALL 15
#include <asm/irq.h>
#include <asm/io.h>
+#include "irq.h"
+
extern unsigned long lvl14_save[5];
static unsigned long *linux_lvl14 = NULL;
static unsigned long obp_lvl14[4];
#include <asm/of_device.h>
#include <asm/irq_regs.h>
+#include "irq.h"
+
DEFINE_SPINLOCK(rtc_lock);
enum sparc_clock_type sp_clock_typ;
DEFINE_SPINLOCK(mostek_lock);
#include <asm/system.h> /* For SUN4M_NCPUS */
#include <asm/btfixup.h>
-#define __irq_ino(irq) irq
-#define __irq_pil(irq) irq
-
#define NR_IRQS 16
#define irq_canonicalize(irq) (irq)
*/
BTFIXUPDEF_CALL(void, disable_irq, unsigned int)
BTFIXUPDEF_CALL(void, enable_irq, unsigned int)
-BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int)
-BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int)
-BTFIXUPDEF_CALL(void, clear_clock_irq, void)
-BTFIXUPDEF_CALL(void, clear_profile_irq, int)
-BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int)
static inline void disable_irq_nosync(unsigned int irq)
{
BTFIXUP_CALL(enable_irq)(irq);
}
-static inline void disable_pil_irq(unsigned int irq)
-{
- BTFIXUP_CALL(disable_pil_irq)(irq);
-}
-
-static inline void enable_pil_irq(unsigned int irq)
-{
- BTFIXUP_CALL(enable_pil_irq)(irq);
-}
-
-static inline void clear_clock_irq(void)
-{
- BTFIXUP_CALL(clear_clock_irq)();
-}
-
-static inline void clear_profile_irq(int irq)
-{
- BTFIXUP_CALL(clear_profile_irq)(irq);
-}
-
-static inline void load_profile_irq(int cpu, int limit)
-{
- BTFIXUP_CALL(load_profile_irq)(cpu, limit);
-}
-
-extern void (*sparc_init_timers)(irq_handler_t lvl10_irq);
-extern void claim_ticker14(irq_handler_t irq_handler,
- int irq,
- unsigned int timeout);
-
-#ifdef CONFIG_SMP
-BTFIXUPDEF_CALL(void, set_cpu_int, int, int)
-BTFIXUPDEF_CALL(void, clear_cpu_int, int, int)
-BTFIXUPDEF_CALL(void, set_irq_udt, int)
-
-#define set_cpu_int(cpu,level) BTFIXUP_CALL(set_cpu_int)(cpu,level)
-#define clear_cpu_int(cpu,level) BTFIXUP_CALL(clear_cpu_int)(cpu,level)
-#define set_irq_udt(cpu) BTFIXUP_CALL(set_irq_udt)(cpu)
-#endif
-
extern int request_fast_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, __const__ char *devname);
-/* On the sun4m, just like the timers, we have both per-cpu and master
- * interrupt registers.
- */
-
-/* These registers are used for sending/receiving irqs from/to
- * different cpu's.
- */
-struct sun4m_intreg_percpu {
- unsigned int tbt; /* Interrupts still pending for this cpu. */
-
- /* These next two registers are WRITE-ONLY and are only
- * "on bit" sensitive, "off bits" written have NO affect.
- */
- unsigned int clear; /* Clear this cpus irqs here. */
- unsigned int set; /* Set this cpus irqs here. */
- unsigned char space[PAGE_SIZE - 12];
-};
-
-/*
- * djhr
- * Actually the clear and set fields in this struct are misleading..
- * according to the SLAVIO manual (and the same applies for the SEC)
- * the clear field clears bits in the mask which will ENABLE that IRQ
- * the set field sets bits in the mask to DISABLE the IRQ.
- *
- * Also the undirected_xx address in the SLAVIO is defined as
- * RESERVED and write only..
- *
- * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
- * sun4m machines, for MP the layout makes more sense.
- */
-struct sun4m_intregs {
- struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
- unsigned int tbt; /* IRQ's that are still pending. */
- unsigned int irqs; /* Master IRQ bits. */
-
- /* Again, like the above, two these registers are WRITE-ONLY. */
- unsigned int clear; /* Clear master IRQ's by setting bits here. */
- unsigned int set; /* Set master IRQ's by setting bits here. */
-
- /* This register is both READ and WRITE. */
- unsigned int undirected_target; /* Which cpu gets undirected irqs. */
-};
-
-extern struct sun4m_intregs *sun4m_interrupts;
-
-/*
- * Bit field defines for the interrupt registers on various
- * Sparc machines.
- */
-
-/* The sun4c interrupt register. */
-#define SUN4C_INT_ENABLE 0x01 /* Allow interrupts. */
-#define SUN4C_INT_E14 0x80 /* Enable level 14 IRQ. */
-#define SUN4C_INT_E10 0x20 /* Enable level 10 IRQ. */
-#define SUN4C_INT_E8 0x10 /* Enable level 8 IRQ. */
-#define SUN4C_INT_E6 0x08 /* Enable level 6 IRQ. */
-#define SUN4C_INT_E4 0x04 /* Enable level 4 IRQ. */
-#define SUN4C_INT_E1 0x02 /* Enable level 1 IRQ. */
-
-/* Dave Redman (djhr@tadpole.co.uk)
- * The sun4m interrupt registers.
- */
-#define SUN4M_INT_ENABLE 0x80000000
-#define SUN4M_INT_E14 0x00000080
-#define SUN4M_INT_E10 0x00080000
-
-#define SUN4M_HARD_INT(x) (0x000000001 << (x))
-#define SUN4M_SOFT_INT(x) (0x000010000 << (x))
-
-#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
-#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
-#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */
-#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */
-#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
-#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
-#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
-#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
-#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
-#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
-#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
-#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
-#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
-#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
-
-#define SUN4M_INT_SBUS(x) (1 << (x+7))
-#define SUN4M_INT_VME(x) (1 << (x))
-
#endif
projects / karo-tx-linux.git / commitdiff