leds: leds-lp5523: fix build warnings

This patch fixes build warnings as below:

drivers/leds/leds-lp5523.c: In function 'lp5523_selftest':
drivers/leds/leds-lp5523.c:496:18: warning: 'adc' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5523.c:471:5: warning: 'vdd' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5523.c: In function 'lp5523_probe':
drivers/leds/leds-lp5523.c:252:9: warning: 'status' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-lp5523.c:201:5: note: 'status' was declared here

If lp5523_read() returns an error, problems will happen. Thus,
when lp5523_read() returns an error, it should be handled.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 97994ffdc0146fd7b95cb4a0ee05282e71c7cb39..4ddf7b445a83d96c8b545696f2fe48d795224e7d 100644 (file)
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -248,7 +248,10 @@ static int lp5523_configure(struct i2c_client *client)
 
        /* Let the programs run for couple of ms and check the engine status */
        usleep_range(3000, 6000);
-       lp5523_read(client, LP5523_REG_STATUS, &status);
+       ret = lp5523_read(client, LP5523_REG_STATUS, &status);
+       if (ret < 0)
+               return ret;
+
        status &= LP5523_ENG_STATUS_MASK;
 
        if (status == LP5523_ENG_STATUS_MASK) {
@@ -464,10 +467,16 @@ static ssize_t lp5523_selftest(struct device *dev,
                                    LP5523_EN_LEDTEST | 16);
        usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
        ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+       if (ret < 0)
+               goto fail;
+
        if (!(status & LP5523_LEDTEST_DONE))
                usleep_range(3000, 6000); /* Was not ready. Wait little bit */
 
-       ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
+       ret = lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
+       if (ret < 0)
+               goto fail;
+
        vdd--;  /* There may be some fluctuation in measurement */
 
        for (i = 0; i < LP5523_LEDS; i++) {
@@ -489,9 +498,14 @@ static ssize_t lp5523_selftest(struct device *dev,
                /* ADC conversion time is 2.7 ms typically */
                usleep_range(3000, 6000);
                ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+               if (ret < 0)
+                       goto fail;
+
                if (!(status & LP5523_LEDTEST_DONE))
                        usleep_range(3000, 6000);/* Was not ready. Wait. */
-               ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
+               ret = lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
+               if (ret < 0)
+                       goto fail;
 
                if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
                        pos += sprintf(buf + pos, "LED %d FAIL\n", i);