IVTV_REG_APU, 0);
if (retval != 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: Error with mc417_register_write\n", __func__);
return -1;
}
retval = request_firmware(&firmware, CX231xx_FIRM_IMAGE_NAME,
- &dev->udev->dev);
+ dev->dev);
if (retval != 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"ERROR: Hotplug firmware request failed (%s).\n",
CX231xx_FIRM_IMAGE_NAME);
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Please fix your hotplug setup, the board will not work without firmware loaded!\n");
return -1;
}
if (firmware->size != CX231xx_FIRM_IMAGE_SIZE) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"ERROR: Firmware size mismatch (have %zd, expected %d)\n",
firmware->size, CX231xx_FIRM_IMAGE_SIZE);
release_firmware(firmware);
}
if (0 != memcmp(firmware->data, magic, 8)) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"ERROR: Firmware magic mismatch, wrong file?\n");
release_firmware(firmware);
return -1;
retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS,
IVTV_CMD_HW_BLOCKS_RST);
if (retval < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: Error with mc417_register_write\n",
__func__);
return retval;
retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8);
if (retval < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: Error with mc417_register_write\n",
__func__);
return retval;
dprintk(2, "%s: PING OK\n", __func__);
retval = cx231xx_load_firmware(dev);
if (retval < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: f/w load failed\n", __func__);
return retval;
}
retval = cx231xx_find_mailbox(dev);
if (retval < 0) {
- dev_err(&dev->udev->dev, "%s: mailbox < 0, error\n",
+ dev_err(dev->dev, "%s: mailbox < 0, error\n",
__func__);
return -1;
}
dev->cx23417_mailbox = retval;
retval = cx231xx_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0);
if (retval < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"ERROR: cx23417 firmware ping failed!\n");
return -1;
}
retval = cx231xx_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1,
&version);
if (retval < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"ERROR: cx23417 firmware get encoder: version failed!\n");
return -1;
}
if (!dev->video_mode.bulk_ctl.num_bufs)
urb_init = 1;
}
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"urb_init=%d dev->video_mode.max_pkt_size=%d\n",
urb_init, dev->video_mode.max_pkt_size);
dev->mode_tv = 1;
sizeof(struct cx231xx_buffer), fh, &dev->lock);
/*
videobuf_queue_sg_init(&fh->vidq, &cx231xx_qops,
- &dev->udev->dev, &dev->ts1.slock,
+ dev->dev, &dev->ts1.slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
sizeof(struct cx231xx_buffer),
{
int i;
- dev_dbg(&dev->udev->dev, "Stopping isoc\n");
+ dev_dbg(dev->dev, "Stopping isoc\n");
for (i = 0; i < CX231XX_AUDIO_BUFS; i++) {
if (dev->adev.urb[i]) {
{
int i;
- dev_dbg(&dev->udev->dev, "Stopping bulk\n");
+ dev_dbg(dev->dev, "Stopping bulk\n");
for (i = 0; i < CX231XX_AUDIO_BUFS; i++) {
if (dev->adev.urb[i]) {
case -ESHUTDOWN:
return;
default: /* error */
- dev_dbg(&dev->udev->dev, "urb completition error %d.\n",
+ dev_dbg(dev->dev, "urb completition error %d.\n",
urb->status);
break;
}
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"resubmit of audio urb failed (error=%i)\n",
status);
}
case -ESHUTDOWN:
return;
default: /* error */
- dev_dbg(&dev->udev->dev, "urb completition error %d.\n",
+ dev_dbg(dev->dev, "urb completition error %d.\n",
urb->status);
break;
}
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"resubmit of audio urb failed (error=%i)\n",
status);
}
int i, errCode;
int sb_size;
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: Starting ISO AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_ISO_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- dev_err(&dev->udev->dev, "usb_alloc_urb failed!\n");
+ dev_err(dev->dev, "usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
int i, errCode;
int sb_size;
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: Starting BULK AUDIO transfers\n", __func__);
if (dev->state & DEV_DISCONNECTED)
memset(dev->adev.transfer_buffer[i], 0x80, sb_size);
urb = usb_alloc_urb(CX231XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
if (!urb) {
- dev_err(&dev->udev->dev, "usb_alloc_urb failed!\n");
+ dev_err(dev->dev, "usb_alloc_urb failed!\n");
for (j = 0; j < i; j++) {
usb_free_urb(dev->adev.urb[j]);
kfree(dev->adev.transfer_buffer[j]);
struct snd_pcm_runtime *runtime = subs->runtime;
struct cx231xx *dev = snd_pcm_substream_chip(subs);
- dev_dbg(&dev->udev->dev, "Allocating vbuffer\n");
+ dev_dbg(dev->dev, "Allocating vbuffer\n");
if (runtime->dma_area) {
if (runtime->dma_bytes > size)
return 0;
struct snd_pcm_runtime *runtime = substream->runtime;
int ret = 0;
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"opening device and trying to acquire exclusive lock\n");
if (!dev) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"BUG: cx231xx can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
if (dev->state & DEV_DISCONNECTED) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Can't open. the device was removed.\n");
return -ENODEV;
}
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 0);
mutex_unlock(&dev->lock);
if (ret < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"failed to set alternate setting !\n");
return ret;
int ret;
struct cx231xx *dev = snd_pcm_substream_chip(substream);
- dev_dbg(&dev->udev->dev, "closing device\n");
+ dev_dbg(dev->dev, "closing device\n");
/* inform hardware to stop streaming */
mutex_lock(&dev->lock);
/* 1 - 48000 samples per sec */
ret = cx231xx_set_alt_setting(dev, INDEX_AUDIO, 0);
if (ret < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"failed to set alternate setting !\n");
mutex_unlock(&dev->lock);
mutex_unlock(&dev->lock);
if (dev->adev.users == 0 && dev->adev.shutdown == 1) {
- dev_dbg(&dev->udev->dev, "audio users: %d\n", dev->adev.users);
- dev_dbg(&dev->udev->dev, "disabling audio stream!\n");
+ dev_dbg(dev->dev, "audio users: %d\n", dev->adev.users);
+ dev_dbg(dev->dev, "disabling audio stream!\n");
dev->adev.shutdown = 0;
- dev_dbg(&dev->udev->dev, "released lock\n");
+ dev_dbg(dev->dev, "released lock\n");
if (atomic_read(&dev->stream_started) > 0) {
atomic_set(&dev->stream_started, 0);
schedule_work(&dev->wq_trigger);
struct cx231xx *dev = snd_pcm_substream_chip(substream);
int ret;
- dev_dbg(&dev->udev->dev, "Setting capture parameters\n");
+ dev_dbg(dev->dev, "Setting capture parameters\n");
ret = snd_pcm_alloc_vmalloc_buffer(substream,
params_buffer_bytes(hw_params));
{
struct cx231xx *dev = snd_pcm_substream_chip(substream);
- dev_dbg(&dev->udev->dev, "Stop capture, if needed\n");
+ dev_dbg(dev->dev, "Stop capture, if needed\n");
if (atomic_read(&dev->stream_started) > 0) {
atomic_set(&dev->stream_started, 0);
struct cx231xx *dev = container_of(work, struct cx231xx, wq_trigger);
if (atomic_read(&dev->stream_started)) {
- dev_dbg(&dev->udev->dev, "starting capture");
+ dev_dbg(dev->dev, "starting capture");
if (is_fw_load(dev) == 0)
cx25840_call(dev, core, load_fw);
if (dev->USE_ISO)
else
cx231xx_init_audio_bulk(dev);
} else {
- dev_dbg(&dev->udev->dev, "stopping capture");
+ dev_dbg(dev->dev, "stopping capture");
cx231xx_isoc_audio_deinit(dev);
}
}
return 0;
}
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"probing for cx231xx non standard usbaudio\n");
- err = snd_card_new(&dev->udev->dev, index[devnr], "Cx231xx Audio",
+ err = snd_card_new(dev->dev, index[devnr], "Cx231xx Audio",
THIS_MODULE, 0, &card);
if (err < 0)
return err;
bEndpointAddress;
adev->num_alt = uif->num_altsetting;
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"audio EndPoint Addr 0x%x, Alternate settings: %i\n",
adev->end_point_addr, adev->num_alt);
adev->alt_max_pkt_size = kmalloc(32 * adev->num_alt, GFP_KERNEL);
wMaxPacketSize);
adev->alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"audio alternate setting %i, max size= %i\n", i,
adev->alt_max_pkt_size[i]);
}
cx231xx_send_gpio_cmd(dev, _gpio_direction, (u8 *)&value, 4, 0, 0);
verve_read_byte(dev, 0x07, &val);
- dev_dbg(&dev->udev->dev, "verve_read_byte address0x07=0x%x\n", val);
+ dev_dbg(dev->dev, "verve_read_byte address0x07=0x%x\n", val);
verve_write_byte(dev, 0x07, 0xF4);
verve_read_byte(dev, 0x07, &val);
- dev_dbg(&dev->udev->dev, "verve_read_byte address0x07=0x%x\n", val);
+ dev_dbg(dev->dev, "verve_read_byte address0x07=0x%x\n", val);
cx231xx_capture_start(dev, 1, Vbi);
while (afe_power_status != 0x18) {
status = afe_write_byte(dev, SUP_BLK_PWRDN, 0x18);
if (status < 0) {
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: Init Super Block failed in send cmd\n",
__func__);
break;
status = afe_read_byte(dev, SUP_BLK_PWRDN, &afe_power_status);
afe_power_status &= 0xff;
if (status < 0) {
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: Init Super Block failed in receive cmd\n",
__func__);
break;
}
i++;
if (i == 10) {
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: Init Super Block force break in loop !!!!\n",
__func__);
status = -1;
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x00);
} else {
- dev_dbg(&dev->udev->dev, "Invalid AV mode input\n");
+ dev_dbg(dev->dev, "Invalid AV mode input\n");
status = -1;
}
break;
status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3,
0x40);
} else {
- dev_dbg(&dev->udev->dev, "Invalid AV mode input\n");
+ dev_dbg(dev->dev, "Invalid AV mode input\n");
status = -1;
}
} /* switch */
status = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ENXTERNAL_AV);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: Failed to set Power - errCode [%d]!\n",
__func__, status);
return status;
status = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ANALOGT_TV);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: Failed to set Power - errCode [%d]!\n",
__func__, status);
return status;
break;
default:
- dev_err(&dev->udev->dev, "%s: Unknown Input %d !\n",
+ dev_err(dev->dev, "%s: Unknown Input %d !\n",
__func__, INPUT(input)->type);
break;
}
if (pin_type != dev->video_input) {
status = cx231xx_afe_adjust_ref_count(dev, pin_type);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: adjust_ref_count :Failed to set AFE input mux - errCode [%d]!\n",
__func__, status);
return status;
/* call afe block to set video inputs */
status = cx231xx_afe_set_input_mux(dev, input);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: set_input_mux :Failed to set AFE input mux - errCode [%d]!\n",
__func__, status);
return status;
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
/* Tell DIF object to go to baseband mode */
status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
status = cx231xx_dif_set_standard(dev,
DIF_USE_BASEBAND);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
/* Reinitialize the DIF */
status = cx231xx_dif_set_standard(dev, dev->norm);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_dif set to By pass mode- errCode [%d]!\n",
__func__, status);
return status;
{
int status = 0;
- dev_dbg(&dev->udev->dev, "%s: 0x%x\n",
+ dev_dbg(dev->dev, "%s: 0x%x\n",
__func__, (unsigned int)dev->norm);
/* Change the DFE_CTRL3 bp_percent to fix flagging */
status = vid_blk_write_word(dev, DFE_CTRL3, 0xCD3F0280);
if (dev->norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M)) {
- dev_dbg(&dev->udev->dev, "%s: NTSC\n", __func__);
+ dev_dbg(dev->dev, "%s: NTSC\n", __func__);
/* Move the close caption lines out of active video,
adjust the active video start point */
(FLD_HBLANK_CNT, 0x79));
} else if (dev->norm & V4L2_STD_SECAM) {
- dev_dbg(&dev->udev->dev, "%s: SECAM\n", __func__);
+ dev_dbg(dev->dev, "%s: SECAM\n", __func__);
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
cx231xx_set_field
(FLD_HBLANK_CNT, 0x85));
} else {
- dev_dbg(&dev->udev->dev, "%s: PAL\n", __func__);
+ dev_dbg(dev->dev, "%s: PAL\n", __func__);
status = cx231xx_read_modify_write_i2c_dword(dev,
VID_BLK_I2C_ADDRESS,
VERT_TIM_CTRL,
/* This is just a casual suggestion to people adding
new boards in case they use a tuner type we don't
currently know about */
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"Unknown tuner type configuring SIF");
break;
}
for (i = 0x100; i < 0x140; i++) {
vid_blk_read_word(dev, i, &value);
- dev_dbg(&dev->udev->dev, "reg0x%x=0x%x\n", i, value);
+ dev_dbg(dev->dev, "reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x300; i < 0x400; i++) {
vid_blk_read_word(dev, i, &value);
- dev_dbg(&dev->udev->dev, "reg0x%x=0x%x\n", i, value);
+ dev_dbg(dev->dev, "reg0x%x=0x%x\n", i, value);
i = i+3;
}
for (i = 0x400; i < 0x440; i++) {
vid_blk_read_word(dev, i, &value);
- dev_dbg(&dev->udev->dev, "reg0x%x=0x%x\n", i, value);
+ dev_dbg(dev->dev, "reg0x%x=0x%x\n", i, value);
i = i+3;
}
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- dev_dbg(&dev->udev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ dev_dbg(dev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
vid_blk_write_word(dev, AFE_CTRL_C2HH_SRC_CTRL, 0x4485D390);
vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value);
- dev_dbg(&dev->udev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
+ dev_dbg(dev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value);
}
#if 0
static void cx231xx_dump_SC_reg(struct cx231xx *dev)
{
u8 value[4] = { 0, 0, 0, 0 };
- dev_dbg(&dev->udev->dev, "%s!\n", __func__);
+ dev_dbg(dev->dev, "%s!\n", __func__);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, BOARD_CFG_STAT,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS_MODE_REG,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_CFG_REG,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_LENGTH_REG,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_CFG_REG,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_LENGTH_REG,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN1,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN2,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN3,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK0,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK1,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK2,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_GAIN,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_CAR_REG,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG1,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG2,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0],
value[1], value[2], value[3]);
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN,
value, 4);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0],
value[1], value[2], value[3]);
}
u32 standard = 0;
u8 value[4] = { 0, 0, 0, 0 };
- dev_dbg(&dev->udev->dev, "Enter cx231xx_set_Colibri_For_LowIF()\n");
+ dev_dbg(dev->dev, "Enter cx231xx_set_Colibri_For_LowIF()\n");
value[0] = (u8) 0x6F;
value[1] = (u8) 0x6F;
value[2] = (u8) 0x6F;
colibri_carrier_offset = cx231xx_Get_Colibri_CarrierOffset(mode,
standard);
- dev_dbg(&dev->udev->dev, "colibri_carrier_offset=%d, standard=0x%x\n",
+ dev_dbg(dev->dev, "colibri_carrier_offset=%d, standard=0x%x\n",
colibri_carrier_offset, standard);
/* Set the band Pass filter for DIF*/
u64 pll_freq_u64 = 0;
u32 i = 0;
- dev_dbg(&dev->udev->dev, "if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
+ dev_dbg(dev->dev, "if_freq=%d;spectral_invert=0x%x;mode=0x%x\n",
if_freq, spectral_invert, mode);
if_freq = 16000000;
}
- dev_dbg(&dev->udev->dev, "Enter IF=%zu\n", ARRAY_SIZE(Dif_set_array));
+ dev_dbg(dev->dev, "Enter IF=%zu\n", ARRAY_SIZE(Dif_set_array));
for (i = 0; i < ARRAY_SIZE(Dif_set_array); i++) {
if (Dif_set_array[i].if_freq == if_freq) {
vid_blk_write_word(dev,
u32 dif_misc_ctrl_value = 0;
u32 func_mode = 0;
- dev_dbg(&dev->udev->dev, "%s: setStandard to %x\n", __func__, standard);
+ dev_dbg(dev->dev, "%s: setStandard to %x\n", __func__, standard);
status = vid_blk_read_word(dev, DIF_MISC_CTRL, &dif_misc_ctrl_value);
if (standard != DIF_USE_BASEBAND)
{
int status = 0;
u32 dwval;
- dev_dbg(&dev->udev->dev, "%s: dev->tuner_type =0%d\n",
+ dev_dbg(dev->dev, "%s: dev->tuner_type =0%d\n",
__func__, dev->tuner_type);
/* Set the RF and IF k_agc values to 4 for PAL/NTSC and 8 for
* SECAM L/B/D standards */
if (dev->power_mode != mode)
dev->power_mode = mode;
else {
- dev_dbg(&dev->udev->dev, "%s: mode = %d, No Change req.\n",
+ dev_dbg(dev->dev, "%s: mode = %d, No Change req.\n",
__func__, mode);
return 0;
}
u32 tmp = 0;
int status = 0;
- dev_dbg(&dev->udev->dev, "%s: ep_mask = %x\n", __func__, ep_mask);
+ dev_dbg(dev->dev, "%s: ep_mask = %x\n", __func__, ep_mask);
status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET,
value, 4);
if (status < 0)
u32 tmp = 0;
int status = 0;
- dev_dbg(&dev->udev->dev, "%s: ep_mask = %x\n", __func__, ep_mask);
+ dev_dbg(dev->dev, "%s: ep_mask = %x\n", __func__, ep_mask);
status =
cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, value, 4);
if (status < 0)
if (dev->udev->speed == USB_SPEED_HIGH) {
switch (media_type) {
case Audio:
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: Audio enter HANC\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x9300);
break;
case Vbi:
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: set vanc registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300);
break;
case Sliced_cc:
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: set hanc registers\n", __func__);
status =
cx231xx_mode_register(dev, TS_MODE_REG, 0x1300);
break;
case Raw_Video:
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: set video registers\n", __func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
break;
case TS1_serial_mode:
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: set ts1 registers", __func__);
if (dev->board.has_417) {
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: MPEG\n", __func__);
value &= 0xFFFFFFFC;
value |= 0x3;
VRT_SET_REGISTER,
TS1_LENGTH_REG, val, 4);
} else {
- dev_dbg(&dev->udev->dev, "%s: BDA\n", __func__);
+ dev_dbg(dev->dev, "%s: BDA\n", __func__);
status = cx231xx_mode_register(dev,
TS_MODE_REG, 0x101);
status = cx231xx_mode_register(dev,
break;
case TS1_parallel_mode:
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"%s: set ts1 parallel mode registers\n",
__func__);
status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
(nCnt > 0));
if (nCnt == 0)
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"No ACK after %d msec -GPIO I2C failed!",
nInit * 10);
if (dev->tuner_type == TUNER_XC5000) {
if (command == XC5000_TUNER_RESET) {
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"Tuner CB: RESET: cmd %d : tuner type %d\n",
command, dev->tuner_type);
cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit,
cx231xx_set_model(dev);
- dev_info(&dev->udev->dev, "Identified as %s (card=%d)\n",
+ dev_info(dev->dev, "Identified as %s (card=%d)\n",
dev->board.name, dev->model);
/* set the direction for GPIO pins */
/* start reading at offset 0 */
ret = i2c_transfer(client->adapter, &msg_write, 1);
if (ret < 0) {
- dev_err(&dev->udev->dev, "Can't read eeprom\n");
+ dev_err(dev->dev, "Can't read eeprom\n");
return ret;
}
ret = i2c_transfer(client->adapter, &msg_read, 1);
if (ret < 0) {
- dev_err(&dev->udev->dev, "Can't read eeprom\n");
+ dev_err(dev->dev, "Can't read eeprom\n");
return ret;
}
eedata_cur += msg_read.len;
}
for (i = 0; i + 15 < len; i += 16)
- dev_dbg(&dev->udev->dev, "i2c eeprom %02x: %*ph\n",
+ dev_dbg(dev->dev, "i2c eeprom %02x: %*ph\n",
i, 16, &eedata[i]);
return 0;
cx231xx_get_i2c_adap(dev, I2C_0),
"cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840 == NULL)
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cx25840 subdev registration failure\n");
cx25840_call(dev, core, load_fw);
"tuner",
dev->tuner_addr, NULL);
if (dev->sd_tuner == NULL)
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"tuner subdev registration failure\n");
else
cx231xx_config_tuner(dev);
/* Query cx231xx to find what pcb config it is related to */
retval = initialize_cx231xx(dev);
if (retval < 0) {
- dev_err(&udev->dev, "Failed to read PCB config\n");
+ dev_err(dev->dev, "Failed to read PCB config\n");
return retval;
}
retval = cx231xx_config(dev);
if (retval) {
- dev_err(&udev->dev, "error configuring device\n");
+ dev_err(dev->dev, "error configuring device\n");
return -ENOMEM;
}
/* register i2c bus */
retval = cx231xx_dev_init(dev);
if (retval) {
- dev_err(&udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_i2c_register - errCode [%d]!\n",
__func__, retval);
goto err_dev_init;
retval = cx231xx_config(dev);
if (retval) {
- dev_err(&udev->dev, "%s: cx231xx_config - errCode [%d]!\n",
- __func__, retval);
+ dev_err(dev->dev, "%s: cx231xx_config - errCode [%d]!\n",
+ __func__, retval);
goto err_dev_init;
}
cx231xx_add_into_devlist(dev);
if (dev->board.has_417) {
- dev_info(&udev->dev, "attach 417 %d\n", dev->model);
+ dev_info(dev->dev, "attach 417 %d\n", dev->model);
if (cx231xx_417_register(dev) < 0) {
- dev_err(&udev->dev,
+ dev_err(dev->dev,
"%s() Failed to register 417 on VID_B\n",
__func__);
}
/* compute alternate max packet sizes for video */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.video_index + 1;
if (idx >= dev->max_iad_interface_count) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Video PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
dev->video_mode.end_point_addr = uif->altsetting[0].endpoint[isoc_pipe].desc.bEndpointAddress;
dev->video_mode.num_alt = uif->num_altsetting;
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"video EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->video_mode.end_point_addr,
dev->video_mode.num_alt);
for (i = 0; i < dev->video_mode.num_alt; i++) {
u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
dev->video_mode.alt_max_pkt_size[i] = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"Alternate setting %i, max size= %i\n", i,
dev->video_mode.alt_max_pkt_size[i]);
}
idx = dev->current_pcb_config.hs_config_info[0].interface_info.vanc_index + 1;
if (idx >= dev->max_iad_interface_count) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"VBI PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
bEndpointAddress;
dev->vbi_mode.num_alt = uif->num_altsetting;
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"VBI EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->vbi_mode.end_point_addr,
dev->vbi_mode.num_alt);
desc.wMaxPacketSize);
dev->vbi_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"Alternate setting %i, max size= %i\n", i,
dev->vbi_mode.alt_max_pkt_size[i]);
}
/* compute alternate max packet sizes for sliced CC */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.hanc_index + 1;
if (idx >= dev->max_iad_interface_count) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Sliced CC PCB interface #%d doesn't exist\n", idx);
return -ENODEV;
}
bEndpointAddress;
dev->sliced_cc_mode.num_alt = uif->num_altsetting;
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"sliced CC EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->sliced_cc_mode.end_point_addr,
dev->sliced_cc_mode.num_alt);
desc.wMaxPacketSize);
dev->sliced_cc_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"Alternate setting %i, max size= %i\n", i,
dev->sliced_cc_mode.alt_max_pkt_size[i]);
}
const struct usb_device_id *id)
{
struct usb_device *udev;
+ struct device *d = &interface->dev;
struct usb_interface *uif;
struct cx231xx *dev = NULL;
int retval = -ENODEV;
nr = find_first_zero_bit(&cx231xx_devused, CX231XX_MAXBOARDS);
if (nr >= CX231XX_MAXBOARDS) {
/* No free device slots */
- dev_err(&udev->dev,
+ dev_err(d,
"Supports only %i devices.\n",
CX231XX_MAXBOARDS);
return -ENOMEM;
dev->devno = nr;
dev->model = id->driver_info;
dev->video_mode.alt = -1;
+ dev->dev = d;
dev->interface_count++;
/* reset gpio dir and value */
speed = "unknown";
}
- dev_info(&udev->dev,
+ dev_info(d,
"New device %s %s @ %s Mbps (%04x:%04x) with %d interfaces\n",
udev->manufacturer ? udev->manufacturer : "",
udev->product ? udev->product : "",
assoc_desc = udev->actconfig->intf_assoc[0];
if (assoc_desc->bFirstInterface != ifnum) {
- dev_err(&udev->dev, "Not found matching IAD interface\n");
+ dev_err(d, "Not found matching IAD interface\n");
retval = -ENODEV;
goto err_if;
}
- dev_dbg(&udev->dev, "registering interface %d\n", ifnum);
+ dev_dbg(d, "registering interface %d\n", ifnum);
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
/* Create v4l2 device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
- dev_err(&udev->dev, "v4l2_device_register failed\n");
+ dev_err(d, "v4l2_device_register failed\n");
goto err_v4l2;
}
/* compute alternate max packet sizes for TS1 */
idx = dev->current_pcb_config.hs_config_info[0].interface_info.ts1_index + 1;
if (idx >= dev->max_iad_interface_count) {
- dev_err(&udev->dev,
- "TS1 PCB interface #%d doesn't exist\n", idx);
+ dev_err(d, "TS1 PCB interface #%d doesn't exist\n",
+ idx);
retval = -ENODEV;
goto err_video_alt;
}
desc.bEndpointAddress;
dev->ts1_mode.num_alt = uif->num_altsetting;
- dev_info(&udev->dev,
+ dev_info(d,
"TS EndPoint Addr 0x%x, Alternate settings: %i\n",
dev->ts1_mode.end_point_addr,
dev->ts1_mode.num_alt);
wMaxPacketSize);
dev->ts1_mode.alt_max_pkt_size[i] =
(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
- dev_dbg(&udev->dev,
- "Alternate setting %i, max size= %i\n", i,
- dev->ts1_mode.alt_max_pkt_size[i]);
+ dev_dbg(d, "Alternate setting %i, max size= %i\n",
+ i, dev->ts1_mode.alt_max_pkt_size[i]);
}
}
wake_up_interruptible_all(&dev->open);
if (dev->users) {
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"device %s is open! Deregistration and memory deallocation are deferred on close.\n",
video_device_node_name(dev->vdev));
list_add_tail(&ops->next, &cx231xx_extension_devlist);
list_for_each_entry(dev, &cx231xx_devlist, devlist) {
ops->init(dev);
- dev_info(&dev->udev->dev, "%s initialized\n", ops->name);
+ dev_info(dev->dev, "%s initialized\n", ops->name);
}
mutex_unlock(&cx231xx_devlist_mutex);
return 0;
mutex_lock(&cx231xx_devlist_mutex);
list_for_each_entry(dev, &cx231xx_devlist, devlist) {
ops->fini(dev);
- dev_info(&dev->udev->dev, "%s removed\n", ops->name);
+ dev_info(dev->dev, "%s removed\n", ops->name);
}
list_del(&ops->next);
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0 && !dev->i2c_scan_running) {
- dev_err(&dev->udev->dev, "%s: failed with status -%d\n",
+ dev_err(dev->dev, "%s: failed with status -%d\n",
__func__, status);
}
usb_set_interface(dev->udev, usb_interface_index,
dev->video_mode.alt);
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot change alt number to %d (error=%i)\n",
dev->video_mode.alt, errCode);
return errCode;
}
if (alt > 0 && max_pkt_size == 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"can't change interface %d alt no. to %d: Max. Pkt size = 0\n",
usb_interface_index, alt);
/*To workaround error number=-71 on EP0 for videograbber,
if (usb_interface_index > 0) {
status = usb_set_interface(dev->udev, usb_interface_index, alt);
if (status < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"can't change interface %d alt no. to %d (err=%i)\n",
usb_interface_index, alt, status);
return status;
buffer, 4096, &actlen, 2000);
if (ret)
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"bulk message failed: %d (%d/%d)", ret,
size, actlen);
else {
dev->video_mode.isoc_ctl.urb =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.urb) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->video_mode.isoc_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.isoc_ctl.transfer_buffer) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot allocate memory for usbtransfer\n");
kfree(dev->video_mode.isoc_ctl.urb);
return -ENOMEM;
for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) {
urb = usb_alloc_urb(max_packets, GFP_KERNEL);
if (!urb) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot alloc isoc_ctl.urb %i\n", i);
cx231xx_uninit_isoc(dev);
return -ENOMEM;
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
rc = usb_submit_urb(dev->video_mode.isoc_ctl.urb[i],
GFP_ATOMIC);
if (rc) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"submit of urb %i failed (error=%i)\n", i,
rc);
cx231xx_uninit_isoc(dev);
dev->video_mode.bulk_ctl.urb =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.bulk_ctl.urb) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->video_mode.bulk_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->video_mode.bulk_ctl.transfer_buffer) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot allocate memory for usbtransfer\n");
kfree(dev->video_mode.bulk_ctl.urb);
return -ENOMEM;
for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) {
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_bulk(dev);
return -ENOMEM;
usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL,
&urb->transfer_dma);
if (!dev->video_mode.bulk_ctl.transfer_buffer[i]) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
rc = usb_submit_urb(dev->video_mode.bulk_ctl.urb[i],
GFP_ATOMIC);
if (rc) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"submit of urb %i failed (error=%i)\n", i, rc);
cx231xx_uninit_bulk(dev);
return rc;
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ENXTERNAL_AV);
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: Failed to set Power - errCode [%d]!\n",
__func__, errCode);
return errCode;
errCode = cx231xx_set_power_mode(dev,
POLARIS_AVMODE_ANALOGT_TV);
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: Failed to set Power - errCode [%d]!\n",
__func__, errCode);
return errCode;
/* initialize Colibri block */
errCode = cx231xx_afe_init_super_block(dev, 0x23c);
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_afe init super block - errCode [%d]!\n",
__func__, errCode);
return errCode;
}
errCode = cx231xx_afe_init_channels(dev);
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_afe init channels - errCode [%d]!\n",
__func__, errCode);
return errCode;
/* Set DIF in By pass mode */
errCode = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND);
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_dif set to By pass mode - errCode [%d]!\n",
__func__, errCode);
return errCode;
/* I2S block related functions */
errCode = cx231xx_i2s_blk_initialize(dev);
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_i2s block initialize - errCode [%d]!\n",
__func__, errCode);
return errCode;
/* init control pins */
errCode = cx231xx_init_ctrl_pin_status(dev);
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_init ctrl pins - errCode [%d]!\n",
__func__, errCode);
return errCode;
break;
}
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: cx231xx_AGC mode to Analog - errCode [%d]!\n",
__func__, errCode);
return errCode;
/* call common vendor command request */
status = cx231xx_send_vendor_cmd(dev, &ven_req);
if (status < 0) {
- dev_err(&dev->udev->dev, "%s: failed with status -%d\n",
+ dev_err(dev->dev, "%s: failed with status -%d\n",
__func__, status);
}
break;
}
if (packet < 0) {
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"URB status %d [%s].\n", status, errmsg);
} else {
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
struct cx231xx *dev = dvb->adapter.priv;
if (dev->USE_ISO) {
- dev_dbg(&dev->udev->dev, "DVB transfer mode is ISO.\n");
+ dev_dbg(dev->dev, "DVB transfer mode is ISO.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 4);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
dev->ts1_mode.max_pkt_size,
dvb_isoc_copy);
} else {
- dev_dbg(&dev->udev->dev, "DVB transfer mode is BULK.\n");
+ dev_dbg(dev->dev, "DVB transfer mode is BULK.\n");
cx231xx_set_alt_setting(dev, INDEX_TS1, 0);
rc = cx231xx_set_mode(dev, CX231XX_DIGITAL_MODE);
if (rc < 0)
cfg.i2c_addr = addr;
if (!dev->dvb->frontend) {
- dev_err(&dev->udev->dev, "%s/2: dvb frontend not attached. "
+ dev_err(dev->dev, "%s/2: dvb frontend not attached. "
"Can't attach xc5000\n", dev->name);
return -EINVAL;
}
fe = dvb_attach(xc5000_attach, dev->dvb->frontend, &cfg);
if (!fe) {
- dev_err(&dev->udev->dev,
- "%s/2: xc5000 attach failed\n", dev->name);
+ dev_err(dev->dev, "%s/2: xc5000 attach failed\n", dev->name);
dvb_frontend_detach(dev->dvb->frontend);
dev->dvb->frontend = NULL;
return -EINVAL;
}
- dev_info(&dev->udev->dev, "%s/2: xc5000 attached\n", dev->name);
+ dev_info(dev->dev, "%s/2: xc5000 attached\n", dev->name);
return 0;
}
if (dops->init != NULL && !dev->xc_fw_load_done) {
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"Reloading firmware for XC5000\n");
status = dops->init(dev->dvb->frontend);
if (status == 0) {
dev->xc_fw_load_done = 1;
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"XC5000 firmware download completed\n");
} else {
dev->xc_fw_load_done = 0;
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"XC5000 firmware download failed !!!\n");
}
}
result = dvb_register_adapter(&dvb->adapter, dev->name, module, device,
adapter_nr);
if (result < 0) {
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"%s: dvb_register_adapter failed (errno = %d)\n",
dev->name, result);
goto fail_adapter;
/* register frontend */
result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
if (result < 0) {
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"%s: dvb_register_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_frontend;
result = dvb_dmx_init(&dvb->demux);
if (result < 0) {
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"%s: dvb_dmx_init failed (errno = %d)\n",
dev->name, result);
goto fail_dmx;
dvb->dmxdev.capabilities = 0;
result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
if (result < 0) {
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"%s: dvb_dmxdev_init failed (errno = %d)\n",
dev->name, result);
goto fail_dmxdev;
dvb->fe_hw.source = DMX_FRONTEND_0;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
dev->name, result);
goto fail_fe_hw;
dvb->fe_mem.source = DMX_MEMORY_FE;
result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
if (result < 0) {
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
dev->name, result);
goto fail_fe_mem;
result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
if (result < 0) {
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"%s: connect_frontend failed (errno = %d)\n",
dev->name, result);
goto fail_fe_conn;
dvb = kzalloc(sizeof(struct cx231xx_dvb), GFP_KERNEL);
if (dvb == NULL) {
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"cx231xx_dvb: memory allocation failed\n");
return -ENOMEM;
}
demod_i2c);
if (dev->dvb->frontend == NULL) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Failed to attach s5h1432 front end\n");
result = -EINVAL;
goto out_free;
demod_i2c);
if (dev->dvb->frontend == NULL) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Failed to attach s5h1411 front end\n");
result = -EINVAL;
goto out_free;
demod_i2c);
if (dev->dvb->frontend == NULL) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Failed to attach s5h1432 front end\n");
result = -EINVAL;
goto out_free;
demod_i2c);
if (dev->dvb->frontend == NULL) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Failed to attach s5h1411 front end\n");
result = -EINVAL;
goto out_free;
break;
case CX231XX_BOARD_HAUPPAUGE_EXETER:
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"%s: looking for tuner / demod on i2c bus: %d\n",
__func__, i2c_adapter_id(tuner_i2c));
tuner_i2c);
if (dev->dvb->frontend == NULL) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Failed to attach LG3305 front end\n");
result = -EINVAL;
goto out_free;
);
if (dev->dvb->frontend == NULL) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Failed to attach SI2165 front end\n");
result = -EINVAL;
goto out_free;
);
if (dev->dvb->frontend == NULL) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Failed to attach SI2165 front end\n");
result = -EINVAL;
goto out_free;
case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
case CX231XX_BOARD_KWORLD_UB430_USB_HYBRID:
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"%s: looking for demod on i2c bus: %d\n",
__func__, i2c_adapter_id(tuner_i2c));
demod_i2c);
if (dev->dvb->frontend == NULL) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Failed to attach mb86a20s demod\n");
result = -EINVAL;
goto out_free;
break;
default:
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
dev->name);
break;
}
if (NULL == dvb->frontend) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s/2: frontend initialization failed\n", dev->name);
result = -EINVAL;
goto out_free;
}
/* register everything */
- result = register_dvb(dvb, THIS_MODULE, dev, &dev->udev->dev);
+ result = register_dvb(dvb, THIS_MODULE, dev, dev->dev);
if (result < 0)
goto out_free;
- dev_info(&dev->udev->dev, "Successfully loaded cx231xx-dvb\n");
+ dev_info(dev->dev, "Successfully loaded cx231xx-dvb\n");
ret:
cx231xx_set_mode(dev, CX231XX_SUSPEND);
rc = i2c_master_recv(&client, &buf, 0);
if (rc < 0)
continue;
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"i2c scan: found device @ port %d addr 0x%x [%s]\n",
i2c_port,
i << 1,
BUG_ON(!dev->cx231xx_send_usb_command);
bus->i2c_adap = cx231xx_adap_template;
- bus->i2c_adap.dev.parent = &dev->udev->dev;
+ bus->i2c_adap.dev.parent = dev->dev;
snprintf(bus->i2c_adap.name, sizeof(bus->i2c_adap.name), "%s-%d", bus->dev->name, bus->nr);
i2c_add_adapter(&bus->i2c_adap);
if (0 != bus->i2c_rc)
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"i2c bus %d register FAILED\n", bus->nr);
return bus->i2c_rc;
{
struct i2c_adapter *i2c_parent = &dev->i2c_bus[1].i2c_adap;
/* what is the correct mux_dev? */
- struct device *mux_dev = &dev->udev->dev;
+ struct device *mux_dev = dev->dev;
dev->i2c_mux_adap[mux_no] = i2c_add_mux_adapter(i2c_parent,
mux_dev,
NULL);
if (!dev->i2c_mux_adap[mux_no])
- dev_warn(&dev->udev->dev,
+ dev_warn(dev->dev,
"i2c mux %d register FAILED\n", mux_no);
return 0;
struct i2c_board_info info;
u8 ir_i2c_bus;
- dev_dbg(&dev->udev->dev, "%s\n", __func__);
+ dev_dbg(dev->dev, "%s\n", __func__);
/* Only initialize if a rc keycode map is defined */
if (!cx231xx_boards[dev->model].rc_map_name)
/* Load and bind ir-kbd-i2c */
ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master;
- dev_dbg(&dev->udev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n",
+ dev_dbg(dev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n",
ir_i2c_bus, info.addr);
dev->ir_i2c_client = i2c_new_device(
cx231xx_get_i2c_adap(dev, ir_i2c_bus), &info);
_current_scenario_idx = INDEX_BUSPOWER_DIF_ONLY;
break;
default:
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"bad config in buspower!!!!\nconfig_info=%x\n",
config_info & BUSPOWER_MASK);
return 1;
_current_scenario_idx = INDEX_SELFPOWER_COMPRESSOR;
break;
default:
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"bad senario!!!!!\nconfig_info=%x\n",
config_info & SELFPOWER_MASK);
return -ENODEV;
sizeof(struct pcb_config));
if (pcb_debug) {
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"SC(0x00) register = 0x%x\n", config_info);
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"scenario %d\n",
(dev->current_pcb_config.index) + 1);
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"type=%x\n",
dev->current_pcb_config.type);
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"mode=%x\n",
dev->current_pcb_config.mode);
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"speed=%x\n",
dev->current_pcb_config.speed);
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"ts1_source=%x\n",
dev->current_pcb_config.ts1_source);
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"ts2_source=%x\n",
dev->current_pcb_config.ts2_source);
- dev_info(&dev->udev->dev,
+ dev_info(dev->dev,
"analog_source=%x\n",
dev->current_pcb_config.analog_source);
}
break;
}
if (packet < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"URB status %d [%s].\n", status, errmsg);
} else {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"URB packet %d, status %d [%s].\n",
packet, status, errmsg);
}
case -ESHUTDOWN:
return;
default: /* error */
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"urb completition error %d.\n", urb->status);
break;
}
urb->status = usb_submit_urb(urb, GFP_ATOMIC);
if (urb->status) {
- dev_err(&dev->udev->dev, "urb resubmit failed (error=%i)\n",
+ dev_err(dev->dev, "urb resubmit failed (error=%i)\n",
urb->status);
}
}
struct urb *urb;
int i;
- dev_dbg(&dev->udev->dev, "called cx231xx_uninit_vbi_isoc\n");
+ dev_dbg(dev->dev, "called cx231xx_uninit_vbi_isoc\n");
dev->vbi_mode.bulk_ctl.nfields = -1;
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
struct urb *urb;
int rc;
- dev_dbg(&dev->udev->dev, "called cx231xx_vbi_isoc\n");
+ dev_dbg(dev->dev, "called cx231xx_vbi_isoc\n");
/* De-allocates all pending stuff */
cx231xx_uninit_vbi_isoc(dev);
dev->vbi_mode.bulk_ctl.urb = kzalloc(sizeof(void *) * num_bufs,
GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.urb) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot alloc memory for usb buffers\n");
return -ENOMEM;
}
dev->vbi_mode.bulk_ctl.transfer_buffer =
kzalloc(sizeof(void *) * num_bufs, GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.transfer_buffer) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot allocate memory for usbtransfer\n");
kfree(dev->vbi_mode.bulk_ctl.urb);
return -ENOMEM;
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot alloc bulk_ctl.urb %i\n", i);
cx231xx_uninit_vbi_isoc(dev);
return -ENOMEM;
dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
kzalloc(sb_size, GFP_KERNEL);
if (!dev->vbi_mode.bulk_ctl.transfer_buffer[i]) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"unable to allocate %i bytes for transfer buffer %i%s\n",
sb_size, i,
in_interrupt() ? " while in int" : "");
for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
rc = usb_submit_urb(dev->vbi_mode.bulk_ctl.urb[i], GFP_ATOMIC);
if (rc) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"submit of urb %i failed (error=%i)\n", i, rc);
cx231xx_uninit_vbi_isoc(dev);
return rc;
struct cx231xx_buffer *buf)
{
/* Advice that buffer was filled */
- /* dev_dbg(&dev->udev->dev, "[%p/%d] wakeup\n", buf, buf->vb.i); */
+ /* dev_dbg(dev->dev, "[%p/%d] wakeup\n", buf, buf->vb.i); */
buf->vb.state = VIDEOBUF_DONE;
buf->vb.field_count++;
char *outp;
if (list_empty(&dma_q->active)) {
- dev_err(&dev->udev->dev, "No active queue to serve\n");
+ dev_err(dev->dev, "No active queue to serve\n");
dev->vbi_mode.bulk_ctl.buf = NULL;
*buf = NULL;
return;
if (!dev->video_mode.bulk_ctl.num_bufs)
urb_init = 1;
}
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"urb_init=%d dev->video_mode.max_pkt_size=%d\n",
urb_init, dev->video_mode.max_pkt_size);
if (urb_init) {
cx231xx_set_audio_input(dev, dev->ctl_ainput);
- dev_dbg(&dev->udev->dev, "video_mux : %d\n", index);
+ dev_dbg(dev->dev, "video_mux : %d\n", index);
/* do mode control overrides if required */
cx231xx_do_mode_ctrl_overrides(dev);
static int check_dev(struct cx231xx *dev)
{
if (dev->state & DEV_DISCONNECTED) {
- dev_err(&dev->udev->dev, "v4l2 ioctl: device not present\n");
+ dev_err(dev->dev, "v4l2 ioctl: device not present\n");
return -ENODEV;
}
return 0;
return -EINVAL;
if (videobuf_queue_is_busy(&fh->vb_vidq)) {
- dev_err(&dev->udev->dev, "%s: queue busy\n", __func__);
+ dev_err(dev->dev, "%s: queue busy\n", __func__);
return -EBUSY;
}
if (dev->stream_on && !fh->stream_on) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s: device in use by another fh\n", __func__);
return -EBUSY;
}
int rc;
u32 if_frequency = 5400000;
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"Enter vidioc_s_frequency()f->frequency=%d;f->type=%d\n",
f->frequency, f->type);
else if (dev->norm & V4L2_STD_SECAM_LC)
if_frequency = 1250000; /*1.25MHz */
- dev_dbg(&dev->udev->dev,
+ dev_dbg(dev->dev,
"if_frequency is set to %d\n", if_frequency);
cx231xx_set_Colibri_For_LowIF(dev, if_frequency, 1, 1);
update_HH_register_after_set_DIF(dev);
}
- dev_dbg(&dev->udev->dev, "Set New FREQUENCY to %d\n", f->frequency);
+ dev_dbg(dev->dev, "Set New FREQUENCY to %d\n", f->frequency);
return rc;
}
struct cx231xx *dev = fh->dev;
if (dev->vbi_stream_on && !fh->stream_on) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"%s device in use by another fh\n", __func__);
return -EBUSY;
}
#if 0
errCode = cx231xx_set_mode(dev, CX231XX_ANALOG_MODE);
if (errCode < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"Device locked on digital mode. Can't open analog\n");
return -EBUSY;
}
dev->radio_dev = NULL;
}
if (dev->vbi_dev) {
- dev_info(&dev->udev->dev, "V4L2 device %s deregistered\n",
+ dev_info(dev->dev, "V4L2 device %s deregistered\n",
video_device_node_name(dev->vbi_dev));
if (video_is_registered(dev->vbi_dev))
video_unregister_device(dev->vbi_dev);
dev->vbi_dev = NULL;
}
if (dev->vdev) {
- dev_info(&dev->udev->dev, "V4L2 device %s deregistered\n",
+ dev_info(dev->dev, "V4L2 device %s deregistered\n",
video_device_node_name(dev->vdev));
if (dev->board.has_417)
{
int ret;
- dev_info(&dev->udev->dev, "v4l2 driver version %s\n", CX231XX_VERSION);
+ dev_info(dev->dev, "v4l2 driver version %s\n", CX231XX_VERSION);
/* set default norm */
dev->norm = V4L2_STD_PAL;
/* allocate and fill video video_device struct */
dev->vdev = cx231xx_vdev_init(dev, &cx231xx_video_template, "video");
if (!dev->vdev) {
- dev_err(&dev->udev->dev, "cannot allocate video_device.\n");
+ dev_err(dev->dev, "cannot allocate video_device.\n");
return -ENODEV;
}
ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
video_nr[dev->devno]);
if (ret) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"unable to register video device (error=%i).\n",
ret);
return ret;
}
- dev_info(&dev->udev->dev, "Registered video device %s [v4l2]\n",
+ dev_info(dev->dev, "Registered video device %s [v4l2]\n",
video_device_node_name(dev->vdev));
/* Initialize VBI template */
dev->vbi_dev = cx231xx_vdev_init(dev, &cx231xx_vbi_template, "vbi");
if (!dev->vbi_dev) {
- dev_err(&dev->udev->dev, "cannot allocate video_device.\n");
+ dev_err(dev->dev, "cannot allocate video_device.\n");
return -ENODEV;
}
dev->vbi_dev->ctrl_handler = &dev->ctrl_handler;
ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
vbi_nr[dev->devno]);
if (ret < 0) {
- dev_err(&dev->udev->dev, "unable to register vbi device\n");
+ dev_err(dev->dev, "unable to register vbi device\n");
return ret;
}
- dev_info(&dev->udev->dev, "Registered VBI device %s\n",
+ dev_info(dev->dev, "Registered VBI device %s\n",
video_device_node_name(dev->vbi_dev));
if (cx231xx_boards[dev->model].radio.type == CX231XX_RADIO) {
dev->radio_dev = cx231xx_vdev_init(dev, &cx231xx_radio_template,
"radio");
if (!dev->radio_dev) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"cannot allocate video_device.\n");
return -ENODEV;
}
ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
radio_nr[dev->devno]);
if (ret < 0) {
- dev_err(&dev->udev->dev,
+ dev_err(dev->dev,
"can't register radio device\n");
return ret;
}
- dev_info(&dev->udev->dev, "Registered radio device as %s\n",
+ dev_info(dev->dev, "Registered radio device as %s\n",
video_device_node_name(dev->radio_dev));
}
char name[30]; /* name (including minor) of the device */
int model; /* index in the device_data struct */
int devno; /* marks the number of this device */
+ struct device *dev; /* pointer to USB interface's dev */
struct cx231xx_board board;
projects / karo-tx-linux.git / commitdiff