ti,pmic-shutdown-controller;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: dcdc1 {
- reg = <0>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
};
dcdc2_reg: dcdc2 {
- reg = <1>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
dcdc3_reg: dcc3 {
- reg = <2>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
};
ldo1_reg: ldo1 {
- reg = <3>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
ldo2_reg: ldo2 {
- reg = <4>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
ldo3_reg: ldo3 {
- reg = <5>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
};
ldo4_reg: ldo4 {
- reg = <6>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
S: Maintained
F: drivers/clk/sunxi/
-ARM/Amlogic MesonX SoC support
+ARM/Amlogic Meson SoC support
M: Carlo Caione <carlo@caione.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-meson@googlegroups.com
+W: http://linux-meson.com/
S: Maintained
-F: drivers/media/rc/meson-ir.c
-N: meson[x68]
+F: arch/arm/mach-meson/
+F: arch/arm/boot/dts/meson*
+N: meson
ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
+M: Antoine Tenart <antoine.tenart@free-electrons.com>
S: Maintained
F: arch/arm/mach-alpine/
+F: arch/arm/boot/dts/alpine*
+F: arch/arm64/boot/dts/al/
+F: drivers/*/*alpine*
ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
M: Nicolas Ferre <nicolas.ferre@atmel.com>
};
};
+
+/include/ "tps65217.dtsi"
+
&tps {
- compatible = "ti,tps65217";
/*
* Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
* mode") at poweroff. Most BeagleBone versions do not support RTC-only
ti,pmic-shutdown-controller;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
};
ldo1_reg: regulator@3 {
- reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
- reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
- reg = <5>;
regulator-name = "vdd_1v8";
regulator-always-on;
};
ldo4_reg: regulator@6 {
- reg = <6>;
regulator-name = "vdd_3v3a";
regulator-always-on;
};
};
-&tps {
- compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
+&tps {
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
};
ldo1_reg: regulator@3 {
- reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
- reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
- reg = <5>;
regulator-name = "vdd_1v8";
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
- reg = <6>;
regulator-name = "vdd_3v3d";
regulator-boot-on;
regulator-always-on;
wp-gpios = <&gpio3 18 0>;
};
-&tps {
- compatible = "ti,tps65217";
+#include "tps65217.dtsi"
+&tps {
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
/* +1.5V voltage with ±4% tolerance */
regulator-min-microvolt = <1450000>;
regulator-max-microvolt = <1550000>;
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <915000>;
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <915000>;
};
ldo1_reg: regulator@3 {
- reg = <3>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
};
ldo2_reg: regulator@4 {
- reg = <4>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
};
ldo3_reg: regulator@5 {
- reg = <5>;
/* +1.8V voltage with ±4% tolerance */
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <1870000>;
};
ldo4_reg: regulator@6 {
- reg = <6>;
/* +3.3V voltage with ±4% tolerance */
regulator-min-microvolt = <3175000>;
regulator-max-microvolt = <3430000>;
vin-supply = <&vbat>;
};
-&tps {
- compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
+&tps {
backlight {
isel = <1>; /* ISET1 */
fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
};
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
/* VDD_1V8 system supply */
regulator-always-on;
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
};
ldo1_reg: regulator@3 {
- reg = <3>;
/* VRTC 1.8V always-on supply */
regulator-name = "vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
- reg = <4>;
/* 3.3V rail */
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
- reg = <5>;
/* VDD_3V3A 3.3V rail */
regulator-name = "vdd_3v3a";
regulator-min-microvolt = <3300000>;
};
ldo4_reg: regulator@6 {
- reg = <6>;
/* VDD_3V3B 3.3V rail */
regulator-name = "vdd_3v3b";
regulator-always-on;
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_BACK>;
debounce-interval = <1000>;
- gpio-key,wakeup;
+ wakeup-source;
};
front_button {
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_FRONT>;
debounce-interval = <1000>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
pinctrl-0 = <&uart4_pins>;
};
+#include "tps65217.dtsi"
+
&tps {
- compatible = "ti,tps65217";
ti,pmic-shutdown-controller;
interrupt-parent = <&intc>;
interrupts = <7>; /* NNMI */
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
dcdc1_reg: regulator@0 {
- reg = <0>;
/* VDDS_DDR */
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
};
dcdc2_reg: regulator@1 {
- reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
};
dcdc3_reg: regulator@2 {
- reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
};
ldo1_reg: regulator@3 {
- reg = <3>;
/* VRTC / VIO / VDDS*/
regulator-always-on;
regulator-min-microvolt = <1800000>;
};
ldo2_reg: regulator@4 {
- reg = <4>;
/* VDD_3V3AUX */
regulator-always-on;
regulator-min-microvolt = <3300000>;
};
ldo3_reg: regulator@5 {
- reg = <5>;
/* VDD_1V8 */
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo4_reg: regulator@6 {
- reg = <6>;
/* VDD_3V3A */
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3104>;
+ assigned-clocks = <&clkoutmux2_clk_mux>;
+ assigned-clock-parents = <&sys_clk2_dclk_div>;
clocks = <&clkout2_clk>;
};
};
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp3_pins_default>;
pinctrl-1 = <&mcasp3_pins_sleep>;
+ assigned-clocks = <&mcasp3_ahclkx_mux>;
+ assigned-clock-parents = <&sys_clkin2>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
ti,debounce-tol = /bits/ 16 <10>;
ti,debounce-rep = /bits/ 16 <1>;
- linux,wakeup;
+ wakeup-source;
};
};
#size-cells = <1>;
reg = <0x2100000 0x10000>;
ranges = <0 0x2100000 0x10000>;
- interrupt-parent = <&intc>;
clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
<&clks IMX6QDL_CLK_CAAM_ACLK>,
<&clks IMX6QDL_CLK_CAAM_IPG>,
#include "kirkwood-synology.dtsi"
/ {
- model = "Synology DS111";
+ model = "Synology DS112";
compatible = "synology,ds111", "marvell,kirkwood";
memory {
};
};
+&devbus_bootcs {
+ status = "okay";
+ devbus,keep-config;
+
+ flash@0 {
+ compatible = "jedec-flash";
+ reg = <0 0x40000>;
+ bank-width = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ header@0 {
+ reg = <0 0x30000>;
+ read-only;
+ };
+
+ uboot@30000 {
+ reg = <0x30000 0xF000>;
+ read-only;
+ };
+
+ uboot_env@3F000 {
+ reg = <0x3F000 0x1000>;
+ };
+ };
+ };
+};
+
&mdio {
status = "okay";
#define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2)
#define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1)
#define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2)
-#define PIN_PA15 14
+#define PIN_PA15 15
#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0)
#define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1)
#define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1)
--- /dev/null
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+ compatible = "ti,tps65217";
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dcdc1_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "dcdc1";
+ };
+
+ dcdc2_reg: regulator@1 {
+ reg = <1>;
+ regulator-compatible = "dcdc2";
+ };
+
+ dcdc3_reg: regulator@2 {
+ reg = <2>;
+ regulator-compatible = "dcdc3";
+ };
+
+ ldo1_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "ldo1";
+ };
+
+ ldo2_reg: regulator@4 {
+ reg = <4>;
+ regulator-compatible = "ldo2";
+ };
+
+ ldo3_reg: regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo3";
+ };
+
+ ldo4_reg: regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo4";
+ };
+ };
+};
#include <asm/setup.h>
#include <asm/mach/arch.h>
+#include <asm/system_info.h>
#include "common.h"
NULL,
};
+/* Set system_rev from atags */
+static void __init rx51_set_system_rev(const struct tag *tags)
+{
+ const struct tag *tag;
+
+ if (tags->hdr.tag != ATAG_CORE)
+ return;
+
+ for_each_tag(tag, tags) {
+ if (tag->hdr.tag == ATAG_REVISION) {
+ system_rev = tag->u.revision.rev;
+ break;
+ }
+ }
+}
+
/* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags,
* save them while the data is still not overwritten
*/
static void __init rx51_reserve(void)
{
- save_atags((const struct tag *)(PAGE_OFFSET + 0x100));
+ const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100);
+
+ save_atags(tags);
+ rx51_set_system_rev(tags);
omap_reserve();
}
static void set_onenand_cfg(void __iomem *onenand_base)
{
- u32 reg;
+ u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT;
- reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
- reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
ONENAND_SYS_CFG1_BL_16;
if (onenand_flags & ONENAND_FLAG_SYNCREAD)
reg |= ONENAND_SYS_CFG1_VHF;
else
reg &= ~ONENAND_SYS_CFG1_VHF;
+
writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
}
}
}
+ onenand_async.sync_write = true;
omap2_onenand_calc_async_timings(&t);
ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od;
+ int err;
switch (event) {
case BUS_NOTIFY_DEL_DEVICE:
if (pdev->archdata.od)
omap_device_delete(pdev->archdata.od);
break;
+ case BUS_NOTIFY_UNBOUND_DRIVER:
+ od = to_omap_device(pdev);
+ if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) {
+ dev_info(dev, "enabled after unload, idling\n");
+ err = omap_device_idle(pdev);
+ if (err)
+ dev_err(dev, "failed to idle\n");
+ }
+ break;
case BUS_NOTIFY_ADD_DEVICE:
if (pdev->dev.of_node)
omap_device_build_from_dt(pdev);
int ret;
ret = omap_device_enable(pdev);
- if (ret)
+ if (ret) {
+ dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n");
return ret;
+ }
return pm_generic_runtime_resume(dev);
}
extern void shmobile_init_delay(void);
extern void shmobile_boot_vector(void);
extern unsigned long shmobile_boot_fn;
-extern unsigned long shmobile_boot_arg;
extern unsigned long shmobile_boot_size;
extern void shmobile_smp_boot(void);
extern void shmobile_smp_sleep(void);
b secondary_startup
ENDPROC(shmobile_boot_scu)
-
- .text
- .align 2
- .globl shmobile_scu_base
-shmobile_scu_base:
- .space 4
.arm
.align 12
ENTRY(shmobile_boot_vector)
- ldr r0, 2f
ldr r1, 1f
bx r1
.globl shmobile_boot_fn
shmobile_boot_fn:
1: .space 4
- .globl shmobile_boot_arg
-shmobile_boot_arg:
-2: .space 4
.globl shmobile_boot_size
shmobile_boot_size:
.long . - shmobile_boot_vector
*/
ENTRY(shmobile_smp_boot)
- @ r0 = MPIDR_HWID_BITMASK
mrc p15, 0, r1, c0, c0, 5 @ r1 = MPIDR
- and r0, r1, r0 @ r0 = cpu_logical_map() value
+ and r0, r1, #0xffffff @ MPIDR_HWID_BITMASK
+ @ r0 = cpu_logical_map() value
mov r1, #0 @ r1 = CPU index
- adr r5, 1f @ array of per-cpu mpidr values
- adr r6, 2f @ array of per-cpu functions
- adr r7, 3f @ array of per-cpu arguments
+ adr r2, 1f
+ ldmia r2, {r5, r6, r7}
+ add r5, r5, r2 @ array of per-cpu mpidr values
+ add r6, r6, r2 @ array of per-cpu functions
+ add r7, r7, r2 @ array of per-cpu arguments
shmobile_smp_boot_find_mpidr:
ldr r8, [r5, r1, lsl #2]
b shmobile_smp_boot
ENDPROC(shmobile_smp_sleep)
+ .align 2
+1: .long shmobile_smp_mpidr - .
+ .long shmobile_smp_fn - 1b
+ .long shmobile_smp_arg - 1b
+
+ .bss
.globl shmobile_smp_mpidr
shmobile_smp_mpidr:
-1: .space NR_CPUS * 4
+ .space NR_CPUS * 4
.globl shmobile_smp_fn
shmobile_smp_fn:
-2: .space NR_CPUS * 4
+ .space NR_CPUS * 4
.globl shmobile_smp_arg
shmobile_smp_arg:
-3: .space NR_CPUS * 4
+ .space NR_CPUS * 4
{
/* install boot code shared by all CPUs */
shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
- shmobile_boot_arg = MPIDR_HWID_BITMASK;
/* perform per-cpu setup */
apmu_parse_cfg(apmu_init_cpu, apmu_config, num);
#include <asm/smp_scu.h>
#include "common.h"
+
+void __iomem *shmobile_scu_base;
+
static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
{
/* install boot code shared by all CPUs */
shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
- shmobile_boot_arg = MPIDR_HWID_BITMASK;
/* enable SCU and cache coherency on booting CPU */
scu_enable(shmobile_scu_base);
{
/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
__raw_writel(__pa(shmobile_boot_vector), AVECR);
- shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
- shmobile_boot_arg = (unsigned long)shmobile_scu_base;
/* setup r8a7779 specific SCU bits */
shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
projects / karo-tx-linux.git / commitdiff