head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
textofs-y := 0x00008000
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
+# We don't want the htc bootloader to corrupt kernel during resume
+textofs-$(CONFIG_PM_H1940) := 0x00108000
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
select PM_H1940 if PM
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
+ select S3C2410_SETUP_TS
help
Say Y here if you are using the HP IPAQ H1940
config MACH_N30
bool "Acer N30 family"
select CPU_S3C2410
+ select MACH_N35
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
+config MACH_N35
+ bool
+ help
+ Internal node in order to enable support for Acer N35 if Acer N30 is
+ selected.
+
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
select MACH_BAST_IDE
select S3C24XX_DCLK
select ISA
+ select S3C_DEV_HWMON
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
help
- zreladdr-y := 0x30008000
-params_phys-y := 0x30000100
-
+ifeq ($(CONFIG_PM_H1940),y)
+ zreladdr-y := 0x30108000
+ params_phys-y := 0x30100100
+else
+ zreladdr-y := 0x30008000
+ params_phys-y := 0x30000100
+endif
#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-#define S3C2410_GPIO_BANKA (32*0)
-#define S3C2410_GPIO_BANKB (32*1)
-#define S3C2410_GPIO_BANKC (32*2)
-#define S3C2410_GPIO_BANKD (32*3)
-#define S3C2410_GPIO_BANKE (32*4)
-#define S3C2410_GPIO_BANKF (32*5)
#define S3C2410_GPIO_BANKG (32*6)
#define S3C2410_GPIO_BANKH (32*7)
+/* GPIO sizes for various SoCs:
+ *
+ * 2442
+ * 2410 2412 2440 2443 2416
+ * ---- ---- ---- ---- ----
+ * A 23 22 25 16 25
+ * B 11 11 11 11 9
+ * C 16 15 16 16 16
+ * D 16 16 16 16 16
+ * E 16 16 16 16 16
+ * F 8 8 8 8 8
+ * G 16 16 16 16 8
+ * H 11 11 9 15 15
+ * J -- -- 13 16 --
+ * K -- -- -- -- 16
+ * L -- -- -- 15 7
+ * M -- -- -- 2 2
+ */
+
/* GPIO bank sizes */
#define S3C2410_GPIO_A_NR (32)
#define S3C2410_GPIO_B_NR (32)
{
struct s3c_gpio_chip *chip;
- if (pin > S3C2410_GPG(10))
+ if (pin > S3C_GPIO_END)
return NULL;
chip = &s3c24xx_gpios[pin/32];
- return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
+ return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
}
#endif /* __ASM_ARCH_GPIO_CORE_H */
* devices that need GPIO.
*/
+#ifdef CONFIG_CPU_S3C244X
+#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
+#else
#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
+#endif
#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
+#ifdef CONFIG_CPU_S3C24XX
+#define S3C_GPIO_END (S3C2410_GPIO_BANKJ + 32)
+#else
#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
+#endif
#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3
#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3
+#define IRQ_LCD_VSYNC IRQ_S3C2443_LCD3
+#define IRQ_LCD_SYSTEM IRQ_S3C2443_LCD2
+
#ifdef CONFIG_CPU_S3C2440
#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
#else
#define S3C2443_PA_HSMMC (0x4A800000)
#define S3C2416_PA_HSMMC0 (0x4AC00000)
+#define S3C2443_PA_FB (0x4C800000)
+
/* S3C2412 memory and IO controls */
#define S3C2412_PA_SSMC (0x4F000000)
#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C24XX_PA_SDI S3C2410_PA_SDI
#define S3C24XX_PA_NAND S3C2410_PA_NAND
+#define S3C_PA_FB S3C2443_PA_FB
#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_UART S3C24XX_PA_UART
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#include <mach/gpio-nrs.h>
#ifdef CONFIG_CPU_S3C2400
-#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x)
-#define S3C24XX_MISCCR S3C2400_MISCCR
+#define S3C24XX_MISCCR S3C2400_MISCCR
#else
-#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x)
-#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
+#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80)
#endif /* CONFIG_CPU_S3C2400 */
-
-/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
-
-#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32)
-#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2))
-#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \
- (2 * (S3C2400_BANKNUM(pin)-2)))
-
-#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \
- S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
- S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
-
-
-#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
-#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
-
/* general configuration options */
#define S3C2410_GPIO_LEAVE (0xFFFFFFFF)
#define S3C2443_HCLKCON_DMA4 (1<<4)
#define S3C2443_HCLKCON_DMA5 (1<<5)
#define S3C2443_HCLKCON_CAMIF (1<<8)
-#define S3C2443_HCLKCON_DISP (1<<9)
-#define S3C2443_HCLKCON_LCDC (1<<10)
+#define S3C2443_HCLKCON_LCDC (1<<9)
#define S3C2443_HCLKCON_USBH (1<<11)
#define S3C2443_HCLKCON_USBD (1<<12)
#define S3C2443_HCLKCON_HSMMC (1<<16)
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
- s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
+ s3c_hwmon_set_platdata(&bast_hwmon_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
#include <mach/h1940.h>
#include <mach/h1940-latch.h>
#include <mach/fb.h>
-#include <mach/ts.h>
#include <plat/udc.h>
#include <plat/iic.h>
#include <plat/pll.h>
#include <plat/pm.h>
#include <plat/mci.h>
+#include <plat/ts.h>
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
.delay = 10000,
.presc = 49,
.oversampling_shift = 2,
+ .cfg_gpio = s3c24xx_ts_cfg_gpio,
};
/**
.xres = 240,
.yres = 320,
.bpp = 16,
- .left_margin = 20,
- .right_margin = 8,
+ .left_margin = 8,
+ .right_margin = 20,
.hsync_len = 4,
.upper_margin = 8,
.lower_margin = 7,
};
static struct platform_device *h1940_devices[] __initdata = {
- &s3c_device_ts,
&s3c_device_ohci,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_timer[0],
&h1940_backlight,
&h1940_lcd_powerdev,
+ &s3c_device_adc,
+ &s3c_device_ts,
};
static void __init h1940_map_io(void)
}
MACHINE_START(H1940, "IPAQ-H1940")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
#include <linux/serial_core.h>
#include <linux/timer.h>
#include <linux/io.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
+#include <plat/mci.h>
#include <plat/s3c2410.h>
#include <plat/udc.h>
{
.gpio = S3C2410_GPF(0),
.code = KEY_POWER,
+ .type = EV_PWR,
.desc = "Power",
.active_low = 0,
+ .wakeup = 1,
},
{
.gpio = S3C2410_GPG(9),
.def_trigger = "",
};
+/* This is the blue LED on the device. Originaly used to indicate GPS activity
+ * by flashing. */
+static struct s3c24xx_led_platdata n35_blue_led_pdata = {
+ .name = "blue_led",
+ .gpio = S3C2410_GPD(8),
+ .def_trigger = "",
+};
+
/* This LED is driven by the battery microcontroller, and is blinking
* red, blinking green or solid green when the battery is low,
* charging or full respectively. By driving GPD9 low, it's possible
.def_trigger = "",
};
+static struct s3c24xx_led_platdata n35_warning_led_pdata = {
+ .name = "warning_led",
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .gpio = S3C2410_GPD(9),
+ .def_trigger = "",
+};
+
static struct platform_device n30_blue_led = {
.name = "s3c24xx_led",
.id = 1,
},
};
+static struct platform_device n35_blue_led = {
+ .name = "s3c24xx_led",
+ .id = 1,
+ .dev = {
+ .platform_data = &n35_blue_led_pdata,
+ },
+};
+
static struct platform_device n30_warning_led = {
.name = "s3c24xx_led",
.id = 2,
},
};
+static struct platform_device n35_warning_led = {
+ .name = "s3c24xx_led",
+ .id = 2,
+ .dev = {
+ .platform_data = &n35_warning_led_pdata,
+ },
+};
+
static struct s3c2410fb_display n30_display __initdata = {
.type = S3C2410_LCDCON1_TFT,
.width = 240,
.lpcsel = 0x06,
};
+static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
+{
+ switch (power_mode) {
+ case MMC_POWER_ON:
+ case MMC_POWER_UP:
+ gpio_set_value(S3C2410_GPG(4), 1);
+ break;
+ case MMC_POWER_OFF:
+ default:
+ gpio_set_value(S3C2410_GPG(4), 0);
+ break;
+ }
+}
+
+static struct s3c24xx_mci_pdata n30_mci_cfg __initdata = {
+ .gpio_detect = S3C2410_GPF(1),
+ .gpio_wprotect = S3C2410_GPG(10),
+ .ocr_avail = MMC_VDD_32_33,
+ .set_power = n30_sdi_set_power,
+};
+
static struct platform_device *n30_devices[] __initdata = {
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_ohci,
+ &s3c_device_rtc,
&s3c_device_usbgadget,
+ &s3c_device_sdi,
&n30_button_device,
&n30_blue_led,
&n30_warning_led,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
+ &s3c_device_rtc,
&s3c_device_usbgadget,
+ &s3c_device_sdi,
&n35_button_device,
+ &n35_blue_led,
+ &n35_warning_led,
};
static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
}
-static void __init n30_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
/* GPB3 is the line that controls the pull-up for the USB D+ line */
static void __init n30_init(void)
{
+ WARN_ON(gpio_request(S3C2410_GPG(4), "mmc power"));
+
s3c24xx_fb_set_platdata(&n30_fb_info);
s3c24xx_udc_set_platdata(&n30_udc_cfg);
+ s3c24xx_mci_set_platdata(&n30_mci_cfg);
s3c_i2c0_set_platdata(&n30_i2ccfg);
/* Turn off suspend on both USB ports, and switch the
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1,
- S3C2410_MISCCR_USBSUSPND1);
+ S3C2410_MISCCR_USBSUSPND0);
platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
}
.boot_params = S3C2410_SDRAM_PA + 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
- .init_irq = n30_init_irq,
+ .init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
MACHINE_END
.boot_params = S3C2410_SDRAM_PA + 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
- .init_irq = n30_init_irq,
+ .init_irq = s3c24xx_init_irq,
.map_io = n30_map_io,
MACHINE_END
__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
}
- /* the RX3715 uses similar code and the same H1940 and the
+ /* RX3715 and RX1950 use similar to H1940 code and the
* same offsets for resume and checksum pointers */
- if (machine_is_rx3715()) {
+ if (machine_is_rx3715() || machine_is_rx1950()) {
void *base = phys_to_virt(H1940_SUSPEND_CHECK);
unsigned long ptr;
unsigned long calc = 0;
if ( machine_is_aml_m5900() )
s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
+ if (machine_is_rx1950()) {
+ /* According to S3C2442 user's manual, page 7-17,
+ * when the system is operating in NAND boot mode,
+ * the hardware pin configuration - EINT[23:21] –
+ * must be set as input for starting up after
+ * wakeup from sleep mode
+ */
+ s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
+ s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
+ s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
+ }
}
static int s3c2410_pm_resume(struct sys_device *dev)
#include <linux/types.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/regs-gpio.h>
-
#include <mach/hardware.h>
+#include <plat/gpio-core.h>
+
int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned long offs = pin - chip->chip.base;
unsigned long flags;
unsigned long slpcon;
offs *= 2;
- if (pin < S3C2410_GPIO_BANKB)
+ if (pin < S3C2410_GPB(0))
return -EINVAL;
- if (pin >= S3C2410_GPIO_BANKF &&
- pin <= S3C2410_GPIO_BANKG)
+ if (pin >= S3C2410_GPF(0) &&
+ pin <= S3C2410_GPG(16))
return -EINVAL;
- if (pin > (S3C2410_GPIO_BANKH + 32))
+ if (pin > S3C2410_GPH(16))
return -EINVAL;
local_irq_save(flags);
- slpcon = __raw_readl(base + 0x0C);
+ slpcon = __raw_readl(chip->base + 0x0C);
slpcon &= ~(3 << offs);
slpcon |= state << offs;
- __raw_writel(slpcon, base + 0x0C);
+ __raw_writel(slpcon, chip->base + 0x0C);
local_irq_restore(flags);
}
MACHINE_START(JIVE, "JIVE")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
}
MACHINE_START(S3C2413, "S3C2413")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
MACHINE_END
MACHINE_START(SMDK2412, "SMDK2412")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
MACHINE_END
MACHINE_START(SMDK2413, "SMDK2413")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
config MACH_SMDK2416
bool "SMDK2416"
select CPU_S3C2416
+ select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
help
#include <linux/io.h>
#include <linux/mtd/partitions.h>
#include <linux/gpio.h>
+#include <linux/fb.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/regs-lcd.h>
#include <mach/idle.h>
-#include <mach/fb.h>
#include <mach/leds-gpio.h>
#include <plat/iic.h>
#include <plat/s3c2416.h>
+#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/nand.h>
+#include <plat/regs-fb-v4.h>
+#include <plat/fb.h>
+
#include <plat/common-smdk.h>
static struct map_desc smdk2416_iodesc[] __initdata = {
}
};
+struct s3c_fb_pd_win smdk2416_fb_win[] = {
+ [0] = {
+ /* think this is the same as the smdk6410 */
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .default_bpp = 16,
+ .max_bpp = 32,
+ },
+};
+
+static void s3c2416_fb_gpio_setup_24bpp(void)
+{
+ unsigned int gpio;
+
+ for (gpio = S3C2410_GPC(1); gpio <= S3C2410_GPC(4); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S3C2410_GPC(8); gpio <= S3C2410_GPC(15); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ for (gpio = S3C2410_GPD(0); gpio <= S3C2410_GPD(15); gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+}
+
+static struct s3c_fb_platdata smdk2416_fb_platdata = {
+ .win[0] = &smdk2416_fb_win[0],
+ .setup_gpio = s3c2416_fb_gpio_setup_24bpp,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
static struct platform_device *smdk2416_devices[] __initdata = {
+ &s3c_device_fb,
&s3c_device_wdt,
&s3c_device_ohci,
&s3c_device_i2c0,
static void __init smdk2416_map_io(void)
{
-
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
-
}
static void __init smdk2416_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
+ s3c_fb_set_platdata(&smdk2416_fb_platdata);
gpio_request(S3C2410_GPB(4), "USBHost Power");
gpio_direction_output(S3C2410_GPB(4), 1);
+ gpio_request(S3C2410_GPB(3), "Display Power");
+ gpio_direction_output(S3C2410_GPB(3), 1);
+
+ gpio_request(S3C2410_GPB(1), "Display Reset");
+ gpio_direction_output(S3C2410_GPB(1), 1);
+
platform_add_devices(smdk2416_devices, ARRAY_SIZE(smdk2416_devices));
smdk_machine_init();
}
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
+ s3c_device_fb.name = "s3c2443-fb";
+
return sysdev_register(&s3c2416_sysdev);
}
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
+config MACH_RX1950
+ bool "HP iPAQ rx1950"
+ select CPU_S3C2442
+ select S3C24XX_DCLK
+ select PM_H1940 if PM
+ select I2C
+ select S3C2410_PWM
+ select S3C_DEV_NAND
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2440_XTAL_16934400
+ help
+ Say Y here if you're using HP iPAQ rx1950
+
endmenu
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
# extra machine support
--- /dev/null
+/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
+ *
+ * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
+ * Copyright (c) 2007-2010 Vasily Khoruzhick
+ *
+ * based on smdk2440 written by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/sysdev.h>
+#include <linux/pwm_backlight.h>
+#include <linux/pwm.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/h1940.h>
+#include <mach/fb.h>
+
+#include <plat/clock.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+#include <plat/ts.h>
+
+#define LCD_PWM_PERIOD 192960
+#define LCD_PWM_DUTY 127353
+
+static struct map_desc rx1950_iodesc[] __initdata = {
+};
+
+static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = {
+ [0] = {
+ .name = "fclk",
+ .divisor = 0x0a,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clocks = rx1950_serial_clocks,
+ .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clocks = rx1950_serial_clocks,
+ .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0xf1,
+ .clocks = rx1950_serial_clocks,
+ .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ },
+};
+
+static struct s3c2410fb_display rx1950_display = {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+
+ .pixclock = 260000,
+ .left_margin = 10,
+ .right_margin = 20,
+ .hsync_len = 10,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .vsync_len = 2,
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVCLK |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_HWSWP |
+ (0x02 << 13) |
+ (0x02 << 15),
+
+};
+
+static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
+ .displays = &rx1950_display,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .lpcsel = 0x02,
+ .gpccon = 0xaa9556a9,
+ .gpccon_mask = 0xffc003fc,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+
+ .gpdcon = 0xaa90aaa1,
+ .gpdcon_mask = 0xffc0fff0,
+ .gpdup = 0x0000fcfd,
+ .gpdup_mask = 0xffffffff,
+
+};
+
+static struct pwm_device *lcd_pwm;
+
+void rx1950_lcd_power(int enable)
+{
+ int i;
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+
+ /* GPC11-GPC15->OUTPUT */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 1);
+
+ /* Wait a bit here... */
+ mdelay(100);
+
+ /* GPD2-GPD7->OUTPUT */
+ /* GPD11-GPD15->OUTPUT */
+ /* GPD2-GPD7->1, GPD11-GPD15->1 */
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+
+ /* Wait a bit here...*/
+ mdelay(100);
+
+ /* GPB0->OUTPUT, GPB0->0 */
+ gpio_direction_output(S3C2410_GPB(0), 0);
+
+ /* GPC1-GPC4->OUTPUT, GPC1-4->0 */
+ for (i = 1; i < 5; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPC15-GPC11->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPD15-GPD11->0, GPD2->GPD7->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ /* GPC6->0, GPC7->0, GPC5->0 */
+ gpio_direction_output(S3C2410_GPC(6), 0);
+ gpio_direction_output(S3C2410_GPC(7), 0);
+ gpio_direction_output(S3C2410_GPC(5), 0);
+
+ /* GPB1->OUTPUT, GPB1->0 */
+ gpio_direction_output(S3C2410_GPB(1), 0);
+ pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
+ pwm_disable(lcd_pwm);
+
+ /* GPC0->0, GPC10->0 */
+ gpio_direction_output(S3C2410_GPC(0), 0);
+ gpio_direction_output(S3C2410_GPC(10), 0);
+ } else {
+ pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
+ pwm_enable(lcd_pwm);
+
+ gpio_direction_output(S3C2410_GPC(0), 1);
+ gpio_direction_output(S3C2410_GPC(5), 1);
+
+ s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
+ gpio_direction_output(S3C2410_GPC(7), 1);
+
+ for (i = 1; i < 5; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 2; i < 8; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ gpio_direction_output(S3C2410_GPC(10), 1);
+ gpio_direction_output(S3C2410_GPC(6), 1);
+ }
+ enabled = enable;
+}
+
+static void rx1950_bl_power(int enable)
+{
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+ gpio_direction_output(S3C2410_GPB(0), 0);
+ } else {
+ /* LED driver need a "push" to power on */
+ gpio_direction_output(S3C2410_GPB(0), 1);
+ /* Warm up backlight for one period of PWM.
+ * Without this trick its almost impossible to
+ * enable backlight with low brightness value
+ */
+ ndelay(48000);
+ s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+ }
+ enabled = enable;
+}
+
+static int rx1950_backlight_init(struct device *dev)
+{
+ WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
+ lcd_pwm = pwm_request(1, "RX1950 LCD");
+ if (IS_ERR(lcd_pwm)) {
+ dev_err(dev, "Unable to request PWM for LCD power!\n");
+ return PTR_ERR(lcd_pwm);
+ }
+
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+
+ return 0;
+}
+
+static void rx1950_backlight_exit(struct device *dev)
+{
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+
+ pwm_free(lcd_pwm);
+ gpio_free(S3C2410_GPB(0));
+}
+
+
+static int rx1950_backlight_notify(struct device *dev, int brightness)
+{
+ if (!brightness) {
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+ } else {
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+ }
+ return brightness;
+}
+
+static struct platform_pwm_backlight_data rx1950_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 24,
+ .dft_brightness = 4,
+ .pwm_period_ns = 48000,
+ .init = rx1950_backlight_init,
+ .notify = rx1950_backlight_notify,
+ .exit = rx1950_backlight_exit,
+};
+
+static struct platform_device rx1950_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &rx1950_backlight_data,
+ },
+};
+
+static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+ switch (power_mode) {
+ case MMC_POWER_OFF:
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+ break;
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ gpio_direction_output(S3C2410_GPJ(1), 1);
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
+ .gpio_detect = S3C2410_GPF(5),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = rx1950_set_mmc_power,
+ .ocr_avail = MMC_VDD_32_33,
+};
+
+static struct mtd_partition rx1950_nand_part[] = {
+ [0] = {
+ .name = "Boot0",
+ .offset = 0,
+ .size = 0x4000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "Boot1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [2] = {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x300000,
+ .mask_flags = 0,
+ },
+ [3] = {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct s3c2410_nand_set rx1950_nand_sets[] = {
+ [0] = {
+ .name = "Internal",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rx1950_nand_part),
+ .partitions = rx1950_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand rx1950_nand_info = {
+ .tacls = 25,
+ .twrph0 = 50,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(rx1950_nand_sets),
+ .sets = rx1950_nand_sets,
+};
+
+static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ switch (cmd) {
+ case S3C2410_UDC_P_ENABLE:
+ gpio_direction_output(S3C2410_GPJ(5), 1);
+ break;
+ case S3C2410_UDC_P_DISABLE:
+ gpio_direction_output(S3C2410_GPJ(5), 0);
+ break;
+ case S3C2410_UDC_P_RESET:
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
+ .udc_command = rx1950_udc_pullup,
+ .vbus_pin = S3C2410_GPG(5),
+ .vbus_pin_inverted = 1,
+};
+
+static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 3,
+};
+
+static struct gpio_keys_button rx1950_gpio_keys_table[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = S3C2410_GPF(0),
+ .active_low = 1,
+ .desc = "Power button",
+ .wakeup = 1,
+ },
+ {
+ .code = KEY_F5,
+ .gpio = S3C2410_GPF(7),
+ .active_low = 1,
+ .desc = "Record button",
+ },
+ {
+ .code = KEY_F1,
+ .gpio = S3C2410_GPG(0),
+ .active_low = 1,
+ .desc = "Calendar button",
+ },
+ {
+ .code = KEY_F2,
+ .gpio = S3C2410_GPG(2),
+ .active_low = 1,
+ .desc = "Contacts button",
+ },
+ {
+ .code = KEY_F3,
+ .gpio = S3C2410_GPG(3),
+ .active_low = 1,
+ .desc = "Mail button",
+ },
+ {
+ .code = KEY_F4,
+ .gpio = S3C2410_GPG(7),
+ .active_low = 1,
+ .desc = "WLAN button",
+ },
+ {
+ .code = KEY_LEFT,
+ .gpio = S3C2410_GPG(10),
+ .active_low = 1,
+ .desc = "Left button",
+ },
+ {
+ .code = KEY_RIGHT,
+ .gpio = S3C2410_GPG(11),
+ .active_low = 1,
+ .desc = "Right button",
+ },
+ {
+ .code = KEY_UP,
+ .gpio = S3C2410_GPG(4),
+ .active_low = 1,
+ .desc = "Up button",
+ },
+ {
+ .code = KEY_DOWN,
+ .gpio = S3C2410_GPG(6),
+ .active_low = 1,
+ .desc = "Down button",
+ },
+ {
+ .code = KEY_ENTER,
+ .gpio = S3C2410_GPG(9),
+ .active_low = 1,
+ .desc = "Ok button"
+ },
+};
+
+static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
+ .buttons = rx1950_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
+};
+
+static struct platform_device rx1950_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev.platform_data = &rx1950_gpio_keys_data,
+};
+
+static struct s3c2410_platform_i2c rx1950_i2c_data = {
+ .flags = 0,
+ .slave_addr = 0x42,
+ .frequency = 400 * 1000,
+ .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+static struct platform_device *rx1950_devices[] __initdata = {
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_usbgadget,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_adc,
+ &s3c_device_ts,
+ &s3c_device_timer[0],
+ &s3c_device_timer[1],
+ &rx1950_backlight,
+ &rx1950_device_gpiokeys,
+};
+
+static struct clk *rx1950_clocks[] __initdata = {
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+};
+
+static void __init rx1950_map_io(void)
+{
+ s3c24xx_clkout0.parent = &clk_h;
+ s3c24xx_clkout1.parent = &clk_f;
+
+ s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
+
+ s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
+ s3c24xx_init_clocks(16934000);
+ s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+
+ /* setup PM */
+
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
+#endif
+
+ s3c_pm_init();
+}
+
+static void __init rx1950_init_machine(void)
+{
+ int i;
+
+ s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
+ s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
+ s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+ s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
+ s3c_i2c0_set_platdata(&rx1950_i2c_data);
+ s3c_nand_set_platdata(&rx1950_nand_info);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup"));
+ gpio_direction_output(S3C2410_GPJ(5), 0);
+
+ /* mmc power is disabled by default */
+ WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+
+ for (i = 0; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 10; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 2; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ for (i = 11; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
+
+ platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
+}
+
+MACHINE_START(RX1950, "HP iPAQ RX1950")
+ /* Maintainers: Vasily Khoruzhick */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = rx1950_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = rx1950_init_machine,
+ .timer = &s3c24xx_timer,
+MACHINE_END
}
MACHINE_START(RX3715, "IPAQ-RX3715")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
}
MACHINE_START(S3C2440, "SMDK2440")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
}
MACHINE_START(SMDK2443, "SMDK2443")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
+ select SAMSUNG_DEV_ADC
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
# device support
obj-y += dev-uart.o
-obj-y += dev-rtc.o
obj-y += dev-audio.o
-obj-$(CONFIG_S3C_ADC) += dev-adc.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
+obj-$(CONFIG_S3C64XX_DEV_TS) += dev-ts.o
.enable = clk_48m_ctrl,
};
+struct clk clk_xusbxti = {
+ .name = "xusbxti",
+ .id = -1,
+ .rate = 48000000,
+};
+
static int inline s3c64xx_gate(void __iomem *reg,
struct clk *clk,
int enable)
.id = -1,
};
+static struct clk clk_iisv4_cd = {
+ .name = "iis_cdclk_v4",
+ .id = -1,
+};
+
static struct clk clk_pcm_cd = {
.name = "pcm_cdclk",
.id = -1,
.nr_sources = ARRAY_SIZE(clkset_audio1_list),
};
+static struct clk *clkset_audio2_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_dout_mpll,
+ [2] = &clk_fin_epll,
+ [3] = &clk_iisv4_cd,
+ [4] = &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio2 = {
+ .sources = clkset_audio2_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio2_list),
+};
+
static struct clk *clkset_camif_list[] = {
&clk_h2,
};
.reg_src = { .reg = S3C_CLK_SRC, .shift = 10, .size = 3 },
.reg_div = { .reg = S3C_CLK_DIV2, .shift = 12, .size = 4 },
.sources = &clkset_audio1,
+ }, {
+ .clk = {
+ .name = "audio-bus",
+ .id = -1, /* There's only one IISv4 port */
+ .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C6410_CLK_SRC2, .shift = 0, .size = 3 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 24, .size = 4 },
+ .sources = &clkset_audio2,
}, {
.clk = {
.name = "irda-bus",
&clk_ext_xtal_mux,
&clk_iis_cd0,
&clk_iis_cd1,
+ &clk_iisv4_cd,
&clk_pcm_cd,
&clk_mout_epll.clk,
&clk_mout_mpll.clk,
&clk_27m,
&clk_48m,
&clk_h2,
+ &clk_xusbxti,
};
/**
EXPORT_SYMBOL(s3c2410_dma_enqueue);
-int s3c2410_dma_devconfig(int channel,
+int s3c2410_dma_devconfig(unsigned int channel,
enum s3c2410_dmasrc source,
unsigned long devaddr)
{
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
+#define S3C_PA_RTC S3C64XX_PA_RTC
+
+#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
#endif /* __ASM_ARCH_6400_MAP_H */
#define S3C_PCLK_GATE S3C_CLKREG(0x34)
#define S3C_SCLK_GATE S3C_CLKREG(0x38)
#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
+#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
/* CLKDIV0 */
#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
}
MACHINE_START(SMDK6400, "SMDK6400")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C64XX_PA_SDRAM + 0x100,
}
MACHINE_START(SMDK6410, "SMDK6410")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C64XX_PA_SDRAM + 0x100,
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
+#include <plat/adc.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
+ s3c_device_adc.name = "s3c64xx-adc";
s3c_device_nand.name = "s3c6400-nand";
}
config CPU_S5P6440
bool
+ select S3C_PL330_DMA
help
Enable S5P6440 CPU support
# Core support for S5P6440 system
-obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o
+obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o dma.o
+obj-$(CONFIG_CPU_S5P6440) += setup-i2c0.o
# machine support
obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
+
+# device support
+obj-y += dev-audio.o
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 1, .size = 1 },
};
-static struct clk clk_h_low = {
- .name = "hclk_low",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
-static struct clk clk_p_low = {
- .name = "pclk_low",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
- .ops = &clk_ops_def_setrate,
-};
-
enum perf_level {
L0 = 532*1000,
L1 = 266*1000,
.round_rate = s5p6440_armclk_round_rate,
};
-static unsigned long s5p6440_clk_doutmpll_get_rate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
+static struct clksrc_clk clk_armclk = {
+ .clk = {
+ .name = "armclk",
+ .id = 1,
+ .parent = &clk_mout_apll.clk,
+ .ops = &s5p6440_clkarm_ops,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 4 },
+};
- if (__raw_readl(S5P_CLK_DIV0) & S5P_CLKDIV0_MPLL_MASK)
- rate /= 2;
+static struct clksrc_clk clk_dout_mpll = {
+ .clk = {
+ .name = "dout_mpll",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 1 },
+};
- return rate;
-}
+static struct clksrc_clk clk_hclk = {
+ .clk = {
+ .name = "clk_hclk",
+ .id = -1,
+ .parent = &clk_armclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 4 },
+};
-static struct clk clk_dout_mpll = {
- .name = "dout_mpll",
- .id = -1,
- .parent = &clk_mout_mpll.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s5p6440_clk_doutmpll_get_rate,
+static struct clksrc_clk clk_pclk = {
+ .clk = {
+ .name = "clk_pclk",
+ .id = -1,
+ .parent = &clk_hclk.clk,
},
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 4 },
+};
+
+static struct clk *clkset_hclklow_list[] = {
+ &clk_mout_apll.clk,
+ &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_hclklow = {
+ .sources = clkset_hclklow_list,
+ .nr_sources = ARRAY_SIZE(clkset_hclklow_list),
+};
+
+static struct clksrc_clk clk_hclk_low = {
+ .clk = {
+ .name = "hclk_low",
+ .id = -1,
+ },
+ .sources = &clkset_hclklow,
+ .reg_src = { .reg = S5P_SYS_OTHERS, .shift = 6, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+ .clk = {
+ .name = "pclk_low",
+ .id = -1,
+ .parent = &clk_hclk_low.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
};
int s5p6440_clk48m_ctrl(struct clk *clk, int enable)
return s5p_gatectrl(S5P_CLK_GATE_SCLK0, clk, enable);
}
+static int s5p6440_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_GATE_SCLK1, clk, enable);
+}
+
static int s5p6440_mem_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLK_GATE_MEM0, clk, enable);
{
.name = "nand",
.id = -1,
- .parent = &clk_h,
+ .parent = &clk_hclk.clk,
.enable = s5p6440_mem_ctrl,
.ctrlbit = S5P_CLKCON_MEM0_HCLK_NFCON,
}, {
.name = "adc",
.id = -1,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_TSADC,
}, {
.name = "i2c",
.id = -1,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_IIC0,
}, {
.name = "i2s_v40",
.id = 0,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_IIS2,
}, {
.name = "spi",
.id = 0,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_SPI0,
}, {
.name = "spi",
.id = 1,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_SPI1,
}, {
}, {
.name = "otg",
.id = -1,
- .parent = &clk_h_low,
+ .parent = &clk_hclk_low.clk,
.enable = s5p6440_hclk0_ctrl,
.ctrlbit = S5P_CLKCON_HCLK0_USB
}, {
.name = "post",
.id = -1,
- .parent = &clk_h_low,
+ .parent = &clk_hclk_low.clk,
.enable = s5p6440_hclk0_ctrl,
.ctrlbit = S5P_CLKCON_HCLK0_POST0
}, {
.name = "lcd",
.id = -1,
- .parent = &clk_h_low,
+ .parent = &clk_hclk_low.clk,
.enable = s5p6440_hclk1_ctrl,
.ctrlbit = S5P_CLKCON_HCLK1_DISPCON,
}, {
.name = "hsmmc",
.id = 0,
- .parent = &clk_h_low,
+ .parent = &clk_hclk_low.clk,
.enable = s5p6440_hclk0_ctrl,
.ctrlbit = S5P_CLKCON_HCLK0_HSMMC0,
}, {
.name = "hsmmc",
.id = 1,
- .parent = &clk_h_low,
+ .parent = &clk_hclk_low.clk,
.enable = s5p6440_hclk0_ctrl,
.ctrlbit = S5P_CLKCON_HCLK0_HSMMC1,
}, {
.name = "hsmmc",
.id = 2,
- .parent = &clk_h_low,
+ .parent = &clk_hclk_low.clk,
.enable = s5p6440_hclk0_ctrl,
.ctrlbit = S5P_CLKCON_HCLK0_HSMMC2,
}, {
.name = "rtc",
.id = -1,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_RTC,
}, {
.name = "watchdog",
.id = -1,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_WDT,
}, {
.name = "timers",
.id = -1,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_PWM,
- }
+ }, {
+ .name = "hclk_fimgvg",
+ .id = -1,
+ .parent = &clk_hclk.clk,
+ .enable = s5p6440_hclk1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "tsi",
+ .id = -1,
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p6440_hclk1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "pclk_fimgvg",
+ .id = -1,
+ .parent = &clk_pclk.clk,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = (1 << 31),
+ }, {
+ .name = "dmc0",
+ .id = -1,
+ .parent = &clk_pclk.clk,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = (1 << 30),
+ }, {
+ .name = "etm",
+ .id = -1,
+ .parent = &clk_pclk.clk,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = (1 << 29),
+ }, {
+ .name = "dsim",
+ .id = -1,
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = (1 << 28),
+ }, {
+ .name = "gps",
+ .id = -1,
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = (1 << 25),
+ }, {
+ .name = "pcm",
+ .id = -1,
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p6440_pclk_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "irom",
+ .id = -1,
+ .parent = &clk_hclk.clk,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = (1 << 25),
+ }, {
+ .name = "dma",
+ .id = -1,
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "2d",
+ .id = -1,
+ .parent = &clk_hclk.clk,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
};
/*
{
.name = "gpio",
.id = -1,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_GPIO,
}, {
.name = "uart",
.id = 0,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_UART0,
}, {
.name = "uart",
.id = 1,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_UART1,
}, {
.name = "uart",
.id = 2,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_UART2,
}, {
.name = "uart",
.id = 3,
- .parent = &clk_p_low,
+ .parent = &clk_pclk_low.clk,
.enable = s5p6440_pclk_ctrl,
.ctrlbit = S5P_CLKCON_PCLK_UART3,
- }
+ }, {
+ .name = "mem",
+ .id = -1,
+ .parent = &clk_hclk.clk,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "intc",
+ .id = -1,
+ .parent = &clk_hclk.clk,
+ .enable = s5p6440_hclk0_ctrl,
+ .ctrlbit = (1 << 1),
+ },
};
static struct clk clk_iis_cd_v40 = {
.id = -1,
};
-static struct clk *clkset_spi_mmc_list[] = {
+static struct clk *clkset_group1_list[] = {
&clk_mout_epll.clk,
- &clk_dout_mpll,
+ &clk_dout_mpll.clk,
&clk_fin_epll,
};
-static struct clksrc_sources clkset_spi_mmc = {
- .sources = clkset_spi_mmc_list,
- .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list),
+static struct clksrc_sources clkset_group1 = {
+ .sources = clkset_group1_list,
+ .nr_sources = ARRAY_SIZE(clkset_group1_list),
};
static struct clk *clkset_uart_list[] = {
&clk_mout_epll.clk,
- &clk_dout_mpll
+ &clk_dout_mpll.clk,
};
static struct clksrc_sources clkset_uart = {
.nr_sources = ARRAY_SIZE(clkset_uart_list),
};
+static struct clk *clkset_audio_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll.clk,
+ &clk_fin_epll,
+ &clk_iis_cd_v40,
+ &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio = {
+ .sources = clkset_audio_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio_list),
+};
+
static struct clksrc_clk clksrcs[] = {
{
.clk = {
.ctrlbit = S5P_CLKCON_SCLK0_MMC0,
.enable = s5p6440_sclk_ctrl,
},
- .sources = &clkset_spi_mmc,
+ .sources = &clkset_group1,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 18, .size = 2 },
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4 },
}, {
.ctrlbit = S5P_CLKCON_SCLK0_MMC1,
.enable = s5p6440_sclk_ctrl,
},
- .sources = &clkset_spi_mmc,
+ .sources = &clkset_group1,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 2 },
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 4 },
}, {
.ctrlbit = S5P_CLKCON_SCLK0_MMC2,
.enable = s5p6440_sclk_ctrl,
},
- .sources = &clkset_spi_mmc,
+ .sources = &clkset_group1,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 22, .size = 2 },
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 4 },
}, {
.ctrlbit = S5P_CLKCON_SCLK0_SPI0,
.enable = s5p6440_sclk_ctrl,
},
- .sources = &clkset_spi_mmc,
+ .sources = &clkset_group1,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 14, .size = 2 },
.reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
}, {
.ctrlbit = S5P_CLKCON_SCLK0_SPI1,
.enable = s5p6440_sclk_ctrl,
},
- .sources = &clkset_spi_mmc,
+ .sources = &clkset_group1,
.reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 2 },
.reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
- }
+ }, {
+ .clk = {
+ .name = "sclk_post",
+ .id = -1,
+ .ctrlbit = (1 << 10),
+ .enable = s5p6440_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 26, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_dispcon",
+ .id = -1,
+ .ctrlbit = (1 << 1),
+ .enable = s5p6440_sclk1_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimgvg",
+ .id = -1,
+ .ctrlbit = (1 << 2),
+ .enable = s5p6440_sclk1_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_audio2",
+ .id = -1,
+ .ctrlbit = (1 << 11),
+ .enable = s5p6440_sclk_ctrl,
+ },
+ .sources = &clkset_audio,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 24, .size = 4 },
+ },
};
/* Clock initialisation code */
-static struct clksrc_clk *init_parents[] = {
+static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
&clk_mout_epll,
&clk_mout_mpll,
+ &clk_dout_mpll,
+ &clk_armclk,
+ &clk_hclk,
+ &clk_pclk,
+ &clk_hclk_low,
+ &clk_pclk_low,
};
void __init_or_cpufreq s5p6440_setup_clocks(void)
unsigned long apll;
unsigned long mpll;
unsigned int ptr;
- u32 clkdiv0;
- u32 clkdiv3;
/* Set S5P6440 functions for clk_fout_epll */
clk_fout_epll.enable = s5p6440_epll_enable;
clk_fout_epll.ops = &s5p6440_epll_ops;
- /* Set S5P6440 functions for arm clock */
- clk_arm.parent = &clk_mout_apll.clk;
- clk_arm.ops = &s5p6440_clkarm_ops;
clk_48m.enable = s5p6440_clk48m_ctrl;
- clkdiv0 = __raw_readl(S5P_CLK_DIV0);
- clkdiv3 = __raw_readl(S5P_CLK_DIV3);
-
xtal_clk = clk_get(NULL, "ext_xtal");
BUG_ON(IS_ERR(xtal_clk));
mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4502);
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_apll.rate = apll;
+
printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
" E=%ld.%ldMHz\n",
print_mhz(apll), print_mhz(mpll), print_mhz(epll));
- fclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_ARM);
- hclk = fclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK);
- pclk = hclk / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK);
-
- if (__raw_readl(S5P_OTHERS) & S5P_OTHERS_HCLK_LOW_SEL_MPLL) {
- /* Asynchronous mode */
- hclk_low = mpll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
- } else {
- /* Synchronous mode */
- hclk_low = apll / GET_DIV(clkdiv3, S5P_CLKDIV3_HCLK_LOW);
- }
-
- pclk_low = hclk_low / GET_DIV(clkdiv3, S5P_CLKDIV3_PCLK_LOW);
+ fclk = clk_get_rate(&clk_armclk.clk);
+ hclk = clk_get_rate(&clk_hclk.clk);
+ pclk = clk_get_rate(&clk_pclk.clk);
+ hclk_low = clk_get_rate(&clk_hclk_low.clk);
+ pclk_low = clk_get_rate(&clk_pclk_low.clk);
printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
" PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
print_mhz(hclk), print_mhz(hclk_low),
print_mhz(pclk), print_mhz(pclk_low));
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_apll.rate = apll;
-
clk_f.rate = fclk;
clk_h.rate = hclk;
clk_p.rate = pclk;
- clk_h_low.rate = hclk_low;
- clk_p_low.rate = pclk_low;
-
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_set_clksrc(&clksrcs[ptr], true);
static struct clk *clks[] __initdata = {
&clk_ext,
- &clk_mout_epll.clk,
- &clk_mout_mpll.clk,
- &clk_dout_mpll,
&clk_iis_cd_v40,
&clk_pcm_cd,
- &clk_p_low,
- &clk_h_low,
};
void __init s5p6440_register_clocks(void)
if (ret > 0)
printk(KERN_ERR "Failed to register %u clocks\n", ret);
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
-static struct sysdev_class s5p6440_sysclass = {
+struct sysdev_class s5p6440_sysclass = {
.name = "s5p6440-core",
};
--- /dev/null
+/* linux/arch/arm/mach-s5p6440/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5p6440_cfg_i2s(struct platform_device *pdev)
+{
+ /* configure GPIO for i2s port */
+ switch (pdev->id) {
+ case -1:
+ s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+ .cfg_gpio = s5p6440_cfg_i2s,
+};
+
+static struct resource s5p6440_iis0_resource[] = {
+ [0] = {
+ .start = S5P6440_PA_I2S,
+ .end = S5P6440_PA_I2S + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_TX,
+ .end = DMACH_I2S0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_RX,
+ .end = DMACH_I2S0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6440_device_iis = {
+ .name = "s3c64xx-iis-v4",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p6440_iis0_resource),
+ .resource = s5p6440_iis0_resource,
+ .dev = {
+ .platform_data = &s3c_i2s_pdata,
+ },
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
+ break;
+
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+ .cfg_gpio = s5p6440_pcm_cfg_gpio,
+};
+
+static struct resource s5p6440_pcm0_resource[] = {
+ [0] = {
+ .start = S5P6440_PA_PCM,
+ .end = S5P6440_PA_PCM + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6440_device_pcm = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource),
+ .resource = s5p6440_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p6440_pdma_resource[] = {
+ [0] = {
+ .start = S5P6440_PA_PDMA,
+ .end = S5P6440_PA_PDMA + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DMA0,
+ .end = IRQ_DMA0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_pl330_platdata s5p6440_pdma_pdata = {
+ .peri = {
+ [0] = DMACH_UART0_RX,
+ [1] = DMACH_UART0_TX,
+ [2] = DMACH_UART1_RX,
+ [3] = DMACH_UART1_TX,
+ [4] = DMACH_UART2_RX,
+ [5] = DMACH_UART2_TX,
+ [6] = DMACH_UART3_RX,
+ [7] = DMACH_UART3_TX,
+ [8] = DMACH_MAX,
+ [9] = DMACH_MAX,
+ [10] = DMACH_PCM0_TX,
+ [11] = DMACH_PCM0_RX,
+ [12] = DMACH_I2S0_TX,
+ [13] = DMACH_I2S0_RX,
+ [14] = DMACH_SPI0_TX,
+ [15] = DMACH_SPI0_RX,
+ [16] = DMACH_MAX,
+ [17] = DMACH_MAX,
+ [18] = DMACH_MAX,
+ [19] = DMACH_MAX,
+ [20] = DMACH_SPI1_TX,
+ [21] = DMACH_SPI1_RX,
+ [22] = DMACH_MAX,
+ [23] = DMACH_MAX,
+ [24] = DMACH_MAX,
+ [25] = DMACH_MAX,
+ [26] = DMACH_MAX,
+ [27] = DMACH_MAX,
+ [28] = DMACH_MAX,
+ [29] = DMACH_PWM,
+ [30] = DMACH_MAX,
+ [31] = DMACH_MAX,
+ },
+};
+
+static struct platform_device s5p6440_device_pdma = {
+ .name = "s3c-pl330",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p6440_pdma_resource),
+ .resource = s5p6440_pdma_resource,
+ .dev = {
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s5p6440_pdma_pdata,
+ },
+};
+
+static struct platform_device *s5p6440_dmacs[] __initdata = {
+ &s5p6440_device_pdma,
+};
+
+static int __init s5p6440_dma_init(void)
+{
+ platform_add_devices(s5p6440_dmacs, ARRAY_SIZE(s5p6440_dmacs));
+
+ return 0;
+}
+arch_initcall(s5p6440_dma_init);
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
#define S5P6440_PA_VIC0 (0xE4000000)
#define S5P_PA_VIC0 S5P6440_PA_VIC0
+#define S5P6440_PA_PDMA 0xE9000000
+
#define S5P6440_PA_VIC1 (0xE4100000)
#define S5P_PA_VIC1 S5P6440_PA_VIC1
#define S5P6440_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5P6440_PA_SDRAM
+/* I2S */
+#define S5P6440_PA_I2S 0xF2000000
+
+/* PCM */
+#define S5P6440_PA_PCM 0xF2100000
+
/* compatibiltiy defines. */
#define S3C_PA_UART S5P6440_PA_UART
#define S3C_PA_IIC S5P6440_PA_IIC0
/* linux/arch/arm/mach-s5p6440/include/mach/pwm-clock.h
*
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
- * Copyright 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
*
* S5P6440 - pwm clock and timer support
*
* published by the Free Software Foundation.
*/
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
/**
* pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
*
* Return true if the given configuration from TCFG1 is a TCLK instead
* any of the TDIV clocks.
*/
static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
{
- return tcfg == S3C2410_TCFG1_MUX_TCLK;
+ return 0;
}
/**
*/
static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
{
- return 1 << (1 + tcfg1);
+ return 1 << tcfg1;
}
/**
*/
static inline unsigned int pwm_tdiv_has_div1(void)
{
- return 0;
+ return 1;
}
/**
*/
static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
{
- return ilog2(div) - 1;
+ return ilog2(div);
}
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+#define S3C_TCFG1_MUX_TCLK 0
+
+#endif /* __ASM_ARCH_PWMCLK_H */
};
static struct platform_device *smdk6440_devices[] __initdata = {
+ &s5p6440_device_iis,
};
static void __init smdk6440_map_io(void)
-/* linux/arch/arm/plat-s5p/setup-i2c0.c
+/* linux/arch/arm/mach-s5p6440/setup-i2c0.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
config CPU_S5P6442
bool
select PLAT_S5P
+ select S3C_PL330_DMA
help
Enable S5P6442 CPU support
# Core support for S5P6442 system
-obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o dma.o
+obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o
# machine support
obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o
+
+# device support
+obj-y += dev-audio.o
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
-static struct sysdev_class s5p6442_sysclass = {
+struct sysdev_class s5p6442_sysclass = {
.name = "s5p6442-core",
};
--- /dev/null
+/* linux/arch/arm/mach-s5p6442/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5p6442_cfg_i2s(struct platform_device *pdev)
+{
+ /* configure GPIO for i2s port */
+ switch (pdev->id) {
+ case 1:
+ s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2));
+ break;
+
+ case -1:
+ s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2));
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+ .cfg_gpio = s5p6442_cfg_i2s,
+};
+
+static struct resource s5p6442_iis0_resource[] = {
+ [0] = {
+ .start = S5P6442_PA_I2S0,
+ .end = S5P6442_PA_I2S0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_TX,
+ .end = DMACH_I2S0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_RX,
+ .end = DMACH_I2S0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6442_device_iis0 = {
+ .name = "s3c64xx-iis-v4",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5p6442_iis0_resource),
+ .resource = s5p6442_iis0_resource,
+ .dev = {
+ .platform_data = &s3c_i2s_pdata,
+ },
+};
+
+static struct resource s5p6442_iis1_resource[] = {
+ [0] = {
+ .start = S5P6442_PA_I2S1,
+ .end = S5P6442_PA_I2S1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S1_TX,
+ .end = DMACH_I2S1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S1_RX,
+ .end = DMACH_I2S1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6442_device_iis1 = {
+ .name = "s3c64xx-iis",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p6442_iis1_resource),
+ .resource = s5p6442_iis1_resource,
+ .dev = {
+ .platform_data = &s3c_i2s_pdata,
+ },
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3));
+ break;
+
+ case 1:
+ s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3));
+ break;
+
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+ .cfg_gpio = s5p6442_pcm_cfg_gpio,
+};
+
+static struct resource s5p6442_pcm0_resource[] = {
+ [0] = {
+ .start = S5P6442_PA_PCM0,
+ .end = S5P6442_PA_PCM0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6442_device_pcm0 = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p6442_pcm0_resource),
+ .resource = s5p6442_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource s5p6442_pcm1_resource[] = {
+ [0] = {
+ .start = S5P6442_PA_PCM1,
+ .end = S5P6442_PA_PCM1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM1_TX,
+ .end = DMACH_PCM1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM1_RX,
+ .end = DMACH_PCM1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6442_device_pcm1 = {
+ .name = "samsung-pcm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p6442_pcm1_resource),
+ .resource = s5p6442_pcm1_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5p6442_pdma_resource[] = {
+ [0] = {
+ .start = S5P6442_PA_PDMA,
+ .end = S5P6442_PA_PDMA + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PDMA,
+ .end = IRQ_PDMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
+ .peri = {
+ [0] = DMACH_UART0_RX,
+ [1] = DMACH_UART0_TX,
+ [2] = DMACH_UART1_RX,
+ [3] = DMACH_UART1_TX,
+ [4] = DMACH_UART2_RX,
+ [5] = DMACH_UART2_TX,
+ [6] = DMACH_MAX,
+ [7] = DMACH_MAX,
+ [8] = DMACH_MAX,
+ [9] = DMACH_I2S0_RX,
+ [10] = DMACH_I2S0_TX,
+ [11] = DMACH_I2S0S_TX,
+ [12] = DMACH_I2S1_RX,
+ [13] = DMACH_I2S1_TX,
+ [14] = DMACH_MAX,
+ [15] = DMACH_MAX,
+ [16] = DMACH_SPI0_RX,
+ [17] = DMACH_SPI0_TX,
+ [18] = DMACH_MAX,
+ [19] = DMACH_MAX,
+ [20] = DMACH_PCM0_RX,
+ [21] = DMACH_PCM0_TX,
+ [22] = DMACH_PCM1_RX,
+ [23] = DMACH_PCM1_TX,
+ [24] = DMACH_MAX,
+ [25] = DMACH_MAX,
+ [26] = DMACH_MAX,
+ [27] = DMACH_MSM_REQ0,
+ [28] = DMACH_MSM_REQ1,
+ [29] = DMACH_MSM_REQ2,
+ [30] = DMACH_MSM_REQ3,
+ [31] = DMACH_MAX,
+ },
+};
+
+static struct platform_device s5p6442_device_pdma = {
+ .name = "s3c-pl330",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p6442_pdma_resource),
+ .resource = s5p6442_pdma_resource,
+ .dev = {
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s5p6442_pdma_pdata,
+ },
+};
+
+static struct platform_device *s5p6442_dmacs[] __initdata = {
+ &s5p6442_device_pdma,
+};
+
+static int __init s5p6442_dma_init(void)
+{
+ platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs));
+
+ return 0;
+}
+arch_initcall(s5p6442_dma_init);
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
#define S5P6442_PA_VIC2 (0xE4200000)
#define S5P_PA_VIC2 S5P6442_PA_VIC2
+#define S5P6442_PA_MDMA 0xE8000000
+#define S5P6442_PA_PDMA 0xE9000000
+
#define S5P6442_PA_TIMER (0xEA000000)
#define S5P_PA_TIMER S5P6442_PA_TIMER
#define S5P6442_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5P6442_PA_SDRAM
+/* I2S */
+#define S5P6442_PA_I2S0 0xC0B00000
+#define S5P6442_PA_I2S1 0xF2200000
+
+/* PCM */
+#define S5P6442_PA_PCM0 0xF2400000
+#define S5P6442_PA_PCM1 0xF2500000
+
/* compatibiltiy defines. */
#define S3C_PA_UART S5P6442_PA_UART
#define S3C_PA_IIC S5P6442_PA_IIC0
/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
- * Copyright 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
*
* S5P6442 - pwm clock and timer support
*
/**
* pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
*
* Return true if the given configuration from TCFG1 is a TCLK instead
* any of the TDIV clocks.
*/
static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
{
- return tcfg == S3C2410_TCFG1_MUX_TCLK;
+ return tcfg == S3C64XX_TCFG1_MUX_TCLK;
}
/**
*/
static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
{
- return 1 << (1 + tcfg1);
+ return 1 << tcfg1;
}
/**
*/
static inline unsigned int pwm_tdiv_has_div1(void)
{
- return 0;
+ return 1;
}
/**
*/
static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
{
- return ilog2(div) - 1;
+ return ilog2(div);
}
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
#endif /* __ASM_ARCH_PWMCLK_H */
};
static struct platform_device *smdk6442_devices[] __initdata = {
+ &s5p6442_device_iis0,
};
static void __init smdk6442_map_io(void)
--- /dev/null
+/* linux/arch/arm/mach-s5p6442/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Will be populated later */
+}
help
Enable S5PC100 CPU support
+config S5PC100_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
config S5PC100_SETUP_SDHCI
bool
select S5PC1XX_SETUP_SDHCI_GPIO
help
Internal helper functions for S5PC100 based SDHCI systems
+config S5PC100_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
- select S5PC1XX_SETUP_I2C0
- select S5PC1XX_SETUP_I2C1
- select S5PC1XX_SETUP_FB_24BPP
+ select S5PC100_SETUP_FB_24BPP
+ select S5PC100_SETUP_I2C1
select S5PC100_SETUP_SDHCI
help
Machine support for the Samsung SMDKC100
# Core support for S5PC100 system
-obj-$(CONFIG_CPU_S5PC100) += cpu.o
+obj-$(CONFIG_CPU_S5PC100) += cpu.o gpiolib.o
+obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
# Helper and device support
+obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
# machine support
--- /dev/null
+/* linux/arch/arm/mach-s5pc100/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PC100 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5pc100.h>
+
+static struct clk s5p_clk_otgphy = {
+ .name = "otg_phy",
+ .id = -1,
+};
+
+static struct clk *clk_src_mout_href_list[] = {
+ [0] = &s5p_clk_27m,
+ [1] = &clk_fin_hpll,
+};
+
+static struct clksrc_sources clk_src_mout_href = {
+ .sources = clk_src_mout_href_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_href_list),
+};
+
+static struct clksrc_clk clk_mout_href = {
+ .clk = {
+ .name = "mout_href",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_href,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
+};
+
+static struct clk *clk_src_mout_48m_list[] = {
+ [0] = &clk_xusbxti,
+ [1] = &s5p_clk_otgphy,
+};
+
+static struct clksrc_sources clk_src_mout_48m = {
+ .sources = clk_src_mout_48m_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_48m_list),
+};
+
+static struct clksrc_clk clk_mout_48m = {
+ .clk = {
+ .name = "mout_48m",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_48m,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clk *clk_src_mout_hpll_list[] = {
+ [0] = &s5p_clk_27m,
+};
+
+static struct clksrc_sources clk_src_mout_hpll = {
+ .sources = clk_src_mout_hpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_hpll_list),
+};
+
+static struct clksrc_clk clk_mout_hpll = {
+ .clk = {
+ .name = "mout_hpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_hpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_apll = {
+ .clk = {
+ .name = "div_apll",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_arm = {
+ .clk = {
+ .name = "div_arm",
+ .id = -1,
+ .parent = &clk_div_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_d0_bus = {
+ .clk = {
+ .name = "div_d0_bus",
+ .id = -1,
+ .parent = &clk_div_arm.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_pclkd0 = {
+ .clk = {
+ .name = "div_pclkd0",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_secss = {
+ .clk = {
+ .name = "div_secss",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_apll2 = {
+ .clk = {
+ .name = "div_apll2",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 },
+};
+
+static struct clk *clk_src_mout_am_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_div_apll2.clk,
+};
+
+struct clksrc_sources clk_src_mout_am = {
+ .sources = clk_src_mout_am_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_am_list),
+};
+
+static struct clksrc_clk clk_mout_am = {
+ .clk = {
+ .name = "mout_am",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_am,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_d1_bus = {
+ .clk = {
+ .name = "div_d1_bus",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_mpll2 = {
+ .clk = {
+ .name = "div_mpll2",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_mpll = {
+ .clk = {
+ .name = "div_mpll",
+ .id = -1,
+ .parent = &clk_mout_am.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 },
+};
+
+static struct clk *clk_src_mout_onenand_list[] = {
+ [0] = &clk_div_d0_bus.clk,
+ [1] = &clk_div_d1_bus.clk,
+};
+
+struct clksrc_sources clk_src_mout_onenand = {
+ .sources = clk_src_mout_onenand_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+ .clk = {
+ .name = "mout_onenand",
+ .id = -1,
+ },
+ .sources = &clk_src_mout_onenand,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk clk_div_onenand = {
+ .clk = {
+ .name = "div_onenand",
+ .id = -1,
+ .parent = &clk_mout_onenand.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 },
+};
+
+static struct clksrc_clk clk_div_pclkd1 = {
+ .clk = {
+ .name = "div_pclkd1",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk clk_div_cam = {
+ .clk = {
+ .name = "div_cam",
+ .id = -1,
+ .parent = &clk_div_mpll2.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 },
+};
+
+static struct clksrc_clk clk_div_hdmi = {
+ .clk = {
+ .name = "div_hdmi",
+ .id = -1,
+ .parent = &clk_mout_hpll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
+};
+
+static int s5pc100_epll_enable(struct clk *clk, int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
+
+ if (enable)
+ __raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
+ else
+ __raw_writel(epll_con, S5P_EPLL_CON);
+
+ return 0;
+}
+
+static unsigned long s5pc100_epll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static u32 epll_div[][4] = {
+ { 32750000, 131, 3, 4 },
+ { 32768000, 131, 3, 4 },
+ { 36000000, 72, 3, 3 },
+ { 45000000, 90, 3, 3 },
+ { 45158000, 90, 3, 3 },
+ { 45158400, 90, 3, 3 },
+ { 48000000, 96, 3, 3 },
+ { 49125000, 131, 4, 3 },
+ { 49152000, 131, 4, 3 },
+ { 60000000, 120, 3, 3 },
+ { 67737600, 226, 5, 3 },
+ { 67738000, 226, 5, 3 },
+ { 73800000, 246, 5, 3 },
+ { 73728000, 246, 5, 3 },
+ { 72000000, 144, 3, 3 },
+ { 84000000, 168, 3, 3 },
+ { 96000000, 96, 3, 2 },
+ { 144000000, 144, 3, 2 },
+ { 192000000, 96, 3, 1 }
+};
+
+static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con;
+ unsigned int i;
+
+ if (clk->rate == rate) /* Return if nothing changed */
+ return 0;
+
+ epll_con = __raw_readl(S5P_EPLL_CON);
+
+ epll_con &= ~(PLL65XX_MDIV_MASK | PLL65XX_PDIV_MASK | PLL65XX_SDIV_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con |= (epll_div[i][1] << PLL65XX_MDIV_SHIFT) |
+ (epll_div[i][2] << PLL65XX_PDIV_SHIFT) |
+ (epll_div[i][3] << PLL65XX_SDIV_SHIFT);
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(epll_con, S5P_EPLL_CON);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops s5pc100_epll_ops = {
+ .get_rate = s5pc100_epll_get_rate,
+ .set_rate = s5pc100_epll_set_rate,
+};
+
+static int s5pc100_d0_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_d0_1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_d0_2_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_d1_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_d1_1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_d1_2_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_d1_3_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_d1_4_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_d1_5_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_SCLK0, clk, enable);
+}
+
+static int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_SCLK1, clk, enable);
+}
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "cssys",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "secss",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "g2d",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "mdma",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "cfcon",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "nfcon",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "onenandc",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "sdm",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_2_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "seckey",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_2_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "modemif",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "usbhost",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "pdma",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "pdma",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "rotator",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "fimc",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "fimc",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "fimc",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "jpeg",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "mipi-dsim",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "mipi-csis",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_1_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "g3d",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "tv",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "vp",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "mixer",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "hdmi",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "mfc",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_2_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "apc",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "iec",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "spi",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "irda",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "ccan",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "ccan",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "hsitx",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "hsirx",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "iis",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "iis",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "iis",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "pcm",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "pcm",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "spdif",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "keyif",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_5_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "spi_48m",
+ .id = 0,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "spi_48m",
+ .id = 1,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "spi_48m",
+ .id = 2,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "mmc_48m",
+ .id = 0,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "mmc_48m",
+ .id = 1,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "mmc_48m",
+ .id = 2,
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 17),
+ },
+};
+
+static struct clk clk_vclk54m = {
+ .name = "vclk_54m",
+ .id = -1,
+ .rate = 54000000,
+};
+
+static struct clk clk_i2scdclk0 = {
+ .name = "i2s_cdclk0",
+ .id = -1,
+};
+
+static struct clk clk_i2scdclk1 = {
+ .name = "i2s_cdclk1",
+ .id = -1,
+};
+
+static struct clk clk_i2scdclk2 = {
+ .name = "i2s_cdclk2",
+ .id = -1,
+};
+
+static struct clk clk_pcmcdclk0 = {
+ .name = "pcm_cdclk0",
+ .id = -1,
+};
+
+static struct clk clk_pcmcdclk1 = {
+ .name = "pcm_cdclk1",
+ .id = -1,
+};
+
+static struct clk *clk_src_group1_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll2.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group1 = {
+ .sources = clk_src_group1_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group1_list),
+};
+
+static struct clk *clk_src_group2_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+};
+
+struct clksrc_sources clk_src_group2 = {
+ .sources = clk_src_group2_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group2_list),
+};
+
+static struct clk *clk_src_group3_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_i2scdclk0,
+ [4] = &clk_pcmcdclk0,
+ [5] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group3 = {
+ .sources = clk_src_group3_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group3_list),
+};
+
+static struct clk *clk_src_group4_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_i2scdclk1,
+ [4] = &clk_pcmcdclk1,
+ [5] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group4 = {
+ .sources = clk_src_group4_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group4_list),
+};
+
+static struct clk *clk_src_group5_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_i2scdclk2,
+ [4] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_group5 = {
+ .sources = clk_src_group5_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group5_list),
+};
+
+static struct clk *clk_src_group6_list[] = {
+ [0] = &s5p_clk_27m,
+ [1] = &clk_vclk54m,
+ [2] = &clk_div_hdmi.clk,
+};
+
+struct clksrc_sources clk_src_group6 = {
+ .sources = clk_src_group6_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group6_list),
+};
+
+static struct clk *clk_src_group7_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_mout_hpll.clk,
+ [3] = &clk_vclk54m,
+};
+
+struct clksrc_sources clk_src_group7 = {
+ .sources = clk_src_group7_list,
+ .nr_sources = ARRAY_SIZE(clk_src_group7_list),
+};
+
+static struct clk *clk_src_mmc0_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+};
+
+struct clksrc_sources clk_src_mmc0 = {
+ .sources = clk_src_mmc0_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mmc0_list),
+};
+
+static struct clk *clk_src_mmc12_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_mmc12 = {
+ .sources = clk_src_mmc12_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mmc12_list),
+};
+
+static struct clk *clk_src_irda_usb_list[] = {
+ [0] = &clk_mout_epll.clk,
+ [1] = &clk_div_mpll.clk,
+ [2] = &clk_fin_epll,
+ [3] = &clk_mout_hpll.clk,
+};
+
+struct clksrc_sources clk_src_irda_usb = {
+ .sources = clk_src_irda_usb_list,
+ .nr_sources = ARRAY_SIZE(clk_src_irda_usb_list),
+};
+
+static struct clk *clk_src_pwi_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_mout_epll.clk,
+ [2] = &clk_div_mpll.clk,
+};
+
+struct clksrc_sources clk_src_pwi = {
+ .sources = clk_src_pwi_list,
+ .nr_sources = ARRAY_SIZE(clk_src_pwi_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 0,
+ .ctrlbit = (1 << 4),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 1,
+ .ctrlbit = (1 << 5),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 2,
+ .ctrlbit = (1 << 6),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = (1 << 3),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group2,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mixer",
+ .id = -1,
+ .ctrlbit = (1 << 6),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_group6,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
+ }, {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 0,
+ .ctrlbit = (1 << 8),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group3,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 1,
+ .ctrlbit = (1 << 9),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group4,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 2,
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group5,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_lcd",
+ .id = -1,
+ .ctrlbit = (1 << 0),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 12, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 0,
+ .ctrlbit = (1 << 1),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 1,
+ .ctrlbit = (1 << 2),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 2,
+ .ctrlbit = (1 << 3),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_group7,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 24, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 0,
+ .ctrlbit = (1 << 12),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_mmc0,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 1,
+ .ctrlbit = (1 << 13),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "mmc_bus",
+ .id = 2,
+ .ctrlbit = (1 << 14),
+ .enable = s5pc100_sclk1_ctrl,
+
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_irda",
+ .id = 2,
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_irda_usb,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_irda",
+ .id = -1,
+ .ctrlbit = (1 << 10),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_pwi",
+ .id = -1,
+ .ctrlbit = (1 << 1),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_pwi,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 0, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 3 },
+ }, {
+ .clk = {
+ .name = "sclk_uhost",
+ .id = -1,
+ .ctrlbit = (1 << 11),
+ .enable = s5pc100_sclk0_ctrl,
+
+ },
+ .sources = &clk_src_irda_usb,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 20, .size = 4 },
+ },
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+ &clk_mout_hpll,
+ &clk_mout_href,
+ &clk_mout_48m,
+ &clk_div_apll,
+ &clk_div_arm,
+ &clk_div_d0_bus,
+ &clk_div_pclkd0,
+ &clk_div_secss,
+ &clk_div_apll2,
+ &clk_mout_am,
+ &clk_div_d1_bus,
+ &clk_div_mpll2,
+ &clk_div_mpll,
+ &clk_mout_onenand,
+ &clk_div_onenand,
+ &clk_div_pclkd1,
+ &clk_div_cam,
+ &clk_div_hdmi,
+};
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+ unsigned long xtal;
+ unsigned long arm;
+ unsigned long hclkd0;
+ unsigned long hclkd1;
+ unsigned long pclkd0;
+ unsigned long pclkd1;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned long hpll;
+ unsigned int ptr;
+
+ /* Set S5PC100 functions for clk_fout_epll */
+ clk_fout_epll.enable = s5pc100_epll_enable;
+ clk_fout_epll.ops = &s5pc100_epll_ops;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal = clk_get_rate(&clk_xtal);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll65xx(xtal, __raw_readl(S5P_APLL_CON));
+ mpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_MPLL_CON));
+ epll = s5p_get_pll65xx(xtal, __raw_readl(S5P_EPLL_CON));
+ hpll = s5p_get_pll65xx(xtal, __raw_readl(S5P_HPLL_CON));
+
+ printk(KERN_INFO "S5PC100: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz, E=%ld.%ldMHz, H=%ld.%ldMHz\n",
+ print_mhz(apll), print_mhz(mpll), print_mhz(epll), print_mhz(hpll));
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_mout_hpll.clk.rate = hpll;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+
+ arm = clk_get_rate(&clk_div_arm.clk);
+ hclkd0 = clk_get_rate(&clk_div_d0_bus.clk);
+ pclkd0 = clk_get_rate(&clk_div_pclkd0.clk);
+ hclkd1 = clk_get_rate(&clk_div_d1_bus.clk);
+ pclkd1 = clk_get_rate(&clk_div_pclkd1.clk);
+
+ printk(KERN_INFO "S5PC100: HCLKD0=%ld.%ldMHz, HCLKD1=%ld.%ldMHz, PCLKD0=%ld.%ldMHz, PCLKD1=%ld.%ldMHz\n",
+ print_mhz(hclkd0), print_mhz(hclkd1), print_mhz(pclkd0), print_mhz(pclkd1));
+
+ clk_f.rate = arm;
+ clk_h.rate = hclkd1;
+ clk_p.rate = pclkd1;
+}
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+ {
+ .name = "tzic",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "intc",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_0_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "ebi",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "intmem",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "sromc",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "dmc",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "chipid",
+ .id = -1,
+ .parent = &clk_div_d0_bus.clk,
+ .enable = s5pc100_d0_1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_4_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_3_ctrl,
+ .ctrlbit = (1 << 6),
+ },
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_i2scdclk0,
+ &clk_i2scdclk1,
+ &clk_i2scdclk2,
+ &clk_pcmcdclk0,
+ &clk_pcmcdclk1,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
#include <linux/gpio.h>
#include <mach/map.h>
+#include <mach/regs-gpio.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
/* S5PC100 GPIO bank summary:
*
* L3 8 4Bit None
*/
-#define OFF_GPCON (0x00)
-#define OFF_GPDAT (0x04)
-
-#define con_4bit_shift(__off) ((__off) * 4)
-
-#if 1
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
-/* The s5pc1xx_gpiolib routines are to control the gpio banks where
- * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
- * following example:
- *
- * base + 0x00: Control register, 4 bits per gpio
- * gpio n: 4 bits starting at (4*n)
- * 0000 = input, 0001 = output, others mean special-function
- * base + 0x04: Data register, 1 bit per gpio
- * bit n: data bit n
- *
- * Note, since the data register is one bit per gpio and is at base + 0x4
- * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
- * the output.
- */
-
-static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
-
- con = __raw_readl(base + OFF_GPCON);
- con &= ~(0xf << con_4bit_shift(offset));
- __raw_writel(con, base + OFF_GPCON);
-
- gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
-
- return 0;
-}
-
-static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
- void __iomem *base = ourchip->base;
- unsigned long con;
- unsigned long dat;
-
- con = __raw_readl(base + OFF_GPCON);
- con &= ~(0xf << con_4bit_shift(offset));
- con |= 0x1 << con_4bit_shift(offset);
-
- dat = __raw_readl(base + OFF_GPDAT);
- if (value)
- dat |= 1 << offset;
- else
- dat &= ~(1 << offset);
-
- __raw_writel(dat, base + OFF_GPDAT);
- __raw_writel(con, base + OFF_GPCON);
- __raw_writel(dat, base + OFF_GPDAT);
-
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
-
- return 0;
-}
-
+#if 0
static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
{
return S3C_IRQ_GPIO(chip->base + offset);
return IRQ_EINT(24 + offset);
return -EINVAL;
}
-
+#endif
static struct s3c_gpio_cfg gpio_cfg = {
.set_config = s3c_gpio_setcfg_s3c64xx_4bit,
.set_pull = s3c_gpio_setpull_updown,
extern struct irq_chip s5pc1xx_gpioint;
extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
-static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
+static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
{
- chip->chip.direction_input = s5pc1xx_gpiolib_input;
- chip->chip.direction_output = s5pc1xx_gpiolib_output;
- chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
-
+#if 0
/* Interrupt */
if (chip->config == &gpio_cfg) {
int i, irq;
}
} else if (chip->config == &gpio_cfg_eint)
chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
-}
-
-static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
- int nr_chips,
- void (*fn)(struct s3c_gpio_chip *))
-{
- for (; nr_chips > 0; nr_chips--, chips++) {
- if (fn)
- (fn)(chips);
- s3c_gpiolib_add(chips);
- }
+#endif
}
static __init int s5pc1xx_gpiolib_init(void)
{
- struct s3c_gpio_chip *chips;
+ struct s3c_gpio_chip *chip;
int nr_chips;
- chips = s5pc100_gpio_chips;
- nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+ chip = s5pc100_gpio_chips;
+ nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+
+ for (; nr_chips > 0; nr_chips--, chip++)
+ s5pc100_gpiolib_link(chip);
- s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
+ samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
+ ARRAY_SIZE(s5pc100_gpio_chips));
+#if 0
/* Interrupt */
set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
-
+#endif
return 0;
}
core_initcall(s5pc1xx_gpiolib_init);
* published by the Free Software Foundation.
*/
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
#define S5PC100_GPIO_L2_NR (8)
#define S5PC100_GPIO_L3_NR (8)
#define S5PC100_GPIO_L4_NR (8)
-#define S5PC100_GPIO_MP00_NR (8)
-#define S5PC100_GPIO_MP01_NR (8)
-#define S5PC100_GPIO_MP02_NR (8)
-#define S5PC100_GPIO_MP03_NR (8)
-#define S5PC100_GPIO_MP04_NR (5)
/* GPIO bank numbes */
* change from one gpio bank to another can be caught.
*/
-#define S5PC1XX_GPIO_NEXT(__gpio) \
+#define S5PC100_GPIO_NEXT(__gpio) \
((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-enum s3c_gpio_number {
+enum s5p_gpio_number {
S5PC100_GPIO_A0_START = 0,
- S5PC100_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
- S5PC100_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
- S5PC100_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
- S5PC100_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
- S5PC100_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
- S5PC100_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
- S5PC100_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
- S5PC100_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
- S5PC100_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
- S5PC100_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
- S5PC100_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
- S5PC100_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
- S5PC100_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
- S5PC100_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
- S5PC100_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
- S5PC100_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
- S5PC100_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
- S5PC100_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
- S5PC100_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
- S5PC100_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
- S5PC100_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
- S5PC100_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
- S5PC100_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
- S5PC100_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
- S5PC100_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
- S5PC100_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
- S5PC100_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
- S5PC100_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
- S5PC100_GPIO_L0_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
- S5PC100_GPIO_L1_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
- S5PC100_GPIO_L2_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
- S5PC100_GPIO_L3_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
- S5PC100_GPIO_L4_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
- S5PC100_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
- S5PC100_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
- S5PC100_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
- S5PC100_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
- S5PC100_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
- S5PC100_GPIO_END = S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
+ S5PC100_GPIO_A1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A0),
+ S5PC100_GPIO_B_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_A1),
+ S5PC100_GPIO_C_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_B),
+ S5PC100_GPIO_D_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_C),
+ S5PC100_GPIO_E0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_D),
+ S5PC100_GPIO_E1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E0),
+ S5PC100_GPIO_F0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_E1),
+ S5PC100_GPIO_F1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F0),
+ S5PC100_GPIO_F2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F1),
+ S5PC100_GPIO_F3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F2),
+ S5PC100_GPIO_G0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_F3),
+ S5PC100_GPIO_G1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G0),
+ S5PC100_GPIO_G2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G1),
+ S5PC100_GPIO_G3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G2),
+ S5PC100_GPIO_H0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_G3),
+ S5PC100_GPIO_H1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H0),
+ S5PC100_GPIO_H2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H1),
+ S5PC100_GPIO_H3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H2),
+ S5PC100_GPIO_I_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_H3),
+ S5PC100_GPIO_J0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_I),
+ S5PC100_GPIO_J1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J0),
+ S5PC100_GPIO_J2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J1),
+ S5PC100_GPIO_J3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J2),
+ S5PC100_GPIO_J4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J3),
+ S5PC100_GPIO_K0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_J4),
+ S5PC100_GPIO_K1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K0),
+ S5PC100_GPIO_K2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K1),
+ S5PC100_GPIO_K3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K2),
+ S5PC100_GPIO_L0_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_K3),
+ S5PC100_GPIO_L1_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L0),
+ S5PC100_GPIO_L2_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L1),
+ S5PC100_GPIO_L3_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L2),
+ S5PC100_GPIO_L4_START = S5PC100_GPIO_NEXT(S5PC100_GPIO_L3),
+ S5PC100_GPIO_END = S5PC100_GPIO_NEXT(S5PC100_GPIO_L4),
};
/* S5PC100 GPIO number definitions. */
#define S5PC100_GPL2(_nr) (S5PC100_GPIO_L2_START + (_nr))
#define S5PC100_GPL3(_nr) (S5PC100_GPIO_L3_START + (_nr))
#define S5PC100_GPL4(_nr) (S5PC100_GPIO_L4_START + (_nr))
-#define S5PC100_MP00(_nr) (S5PC100_GPIO_MP00_START + (_nr))
-#define S5PC100_MP01(_nr) (S5PC100_GPIO_MP01_START + (_nr))
-#define S5PC100_MP02(_nr) (S5PC100_GPIO_MP02_START + (_nr))
-#define S5PC100_MP03(_nr) (S5PC100_GPIO_MP03_START + (_nr))
-#define S5PC100_MP04(_nr) (S5PC100_GPIO_MP04_START + (_nr))
-#define S5PC100_MP05(_nr) (S5PC100_GPIO_MP05_START + (_nr))
-/* It used the end of the S5PC1XX gpios */
+/* It used the end of the S5PC100 gpios */
#define S3C_GPIO_END S5PC100_GPIO_END
/* define the number of gpios we need to the one after the MP04() range */
#define ARCH_NR_GPIOS (S5PC100_GPIO_END + 1)
#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
--- /dev/null
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PC100 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x08)
+#define S5P_HPLL_LOCK S5P_CLKREG(0x0C)
+
+#define S5P_APLL_CON S5P_CLKREG(0x100)
+#define S5P_MPLL_CON S5P_CLKREG(0x104)
+#define S5P_EPLL_CON S5P_CLKREG(0x108)
+#define S5P_HPLL_CON S5P_CLKREG(0x10C)
+
+#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
+
+#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
+
+#define S5P_CLK_OUT S5P_CLKREG(0x400)
+
+#define S5P_CLKGATE_D00 S5P_CLKREG(0x500)
+#define S5P_CLKGATE_D01 S5P_CLKREG(0x504)
+#define S5P_CLKGATE_D02 S5P_CLKREG(0x508)
+
+#define S5P_CLKGATE_D10 S5P_CLKREG(0x520)
+#define S5P_CLKGATE_D11 S5P_CLKREG(0x524)
+#define S5P_CLKGATE_D12 S5P_CLKREG(0x528)
+#define S5P_CLKGATE_D13 S5P_CLKREG(0x52C)
+#define S5P_CLKGATE_D14 S5P_CLKREG(0x530)
+#define S5P_CLKGATE_D15 S5P_CLKREG(0x534)
+
+#define S5P_CLKGATE_D20 S5P_CLKREG(0x540)
+
+#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x560)
+#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x564)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_D0_MASK (0x7<<8)
+#define S5P_CLKDIV0_D0_SHIFT (8)
+#define S5P_CLKDIV0_PCLKD0_MASK (0x7<<12)
+#define S5P_CLKDIV0_PCLKD0_SHIFT (12)
+
+/* CLKDIV1 */
+#define S5P_CLKDIV1_D1_MASK (0x7<<12)
+#define S5P_CLKDIV1_D1_SHIFT (12)
+#define S5P_CLKDIV1_PCLKD1_MASK (0x7<<16)
+#define S5P_CLKDIV1_PCLKD1_SHIFT (16)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
- * S5PC1XX - GPIO register definitions
+ * S5PC100 - GPIO register definitions
*/
-#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
-#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
+#ifndef __ASM_MACH_S5PC100_REGS_GPIO_H
+#define __ASM_MACH_S5PC100_REGS_GPIO_H __FILE__
#include <mach/map.h>
#define S5PC100_GPx_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
#define S5PC100_GPx_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
+#endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-gpio.h>
#include <plat/clock.h>
#include <plat/devs.h>
/*
- * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
+ * linux/arch/arm/mach-s5pc100/setup-fb-24bpp.c
*
* Copyright 2009 Samsung Electronics
*
- * Base S5PC1XX setup information for 24bpp LCD framebuffer
+ * Base S5PC100 setup information for 24bpp LCD framebuffer
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <mach/map.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
#define DISR_OFFSET 0x7008
-/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
- * Base S5PC1XX I2C bus 0 gpio configuration
+ * Base S5PC100 I2C bus 0 gpio configuration
*
* Based on plat-s3c64xx/setup-i2c0.c
*
-/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
- * Base S5PC1XX I2C bus 1 gpio configuration
+ * Base S5PC100 I2C bus 1 gpio configuration
*
* Based on plat-s3c64xx/setup-i2c1.c
*
config CPU_S5PV210
bool
select PLAT_S5P
+ select S3C_PL330_DMA
help
Enable S5PV210 CPU support
# Core support for S5PV210 system
-obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o
+obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o
+obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o
# machine support
obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
+
+# device support
+
+obj-y += dev-audio.o
#include <plat/clock-clksrc.h>
#include <plat/s5pv210.h>
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_armclk_list[] = {
+ [0] = &clk_mout_apll.clk,
+ [1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_armclk = {
+ .sources = clkset_armclk_list,
+ .nr_sources = ARRAY_SIZE(clkset_armclk_list),
+};
+
+static struct clksrc_clk clk_armclk = {
+ .clk = {
+ .name = "armclk",
+ .id = -1,
+ },
+ .sources = &clkset_armclk,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk clk_hclk_msys = {
+ .clk = {
+ .name = "hclk_msys",
+ .id = -1,
+ .parent = &clk_armclk.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk clk_pclk_msys = {
+ .clk = {
+ .name = "pclk_msys",
+ .id = -1,
+ .parent = &clk_hclk_msys.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk clk_sclk_a2m = {
+ .clk = {
+ .name = "sclk_a2m",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+};
+
+static struct clk *clkset_hclk_sys_list[] = {
+ [0] = &clk_mout_mpll.clk,
+ [1] = &clk_sclk_a2m.clk,
+};
+
+static struct clksrc_sources clkset_hclk_sys = {
+ .sources = clkset_hclk_sys_list,
+ .nr_sources = ARRAY_SIZE(clkset_hclk_sys_list),
+};
+
+static struct clksrc_clk clk_hclk_dsys = {
+ .clk = {
+ .name = "hclk_dsys",
+ .id = -1,
+ },
+ .sources = &clkset_hclk_sys,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_dsys = {
+ .clk = {
+ .name = "pclk_dsys",
+ .id = -1,
+ .parent = &clk_hclk_dsys.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk clk_hclk_psys = {
+ .clk = {
+ .name = "hclk_psys",
+ .id = -1,
+ },
+ .sources = &clkset_hclk_sys,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_psys = {
+ .clk = {
+ .name = "pclk_psys",
+ .id = -1,
+ .parent = &clk_hclk_psys.clk,
+ },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
+};
+
static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable)
{
return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
}
-static struct clk clk_h200 = {
- .name = "hclk200",
+static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable);
+}
+
+static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable);
+}
+
+static struct clk clk_sclk_hdmi27m = {
+ .name = "sclk_hdmi27m",
.id = -1,
+ .rate = 27000000,
};
-static struct clk clk_h100 = {
- .name = "hclk100",
+static struct clk clk_sclk_hdmiphy = {
+ .name = "sclk_hdmiphy",
.id = -1,
};
-static struct clk clk_h166 = {
- .name = "hclk166",
+static struct clk clk_sclk_usbphy0 = {
+ .name = "sclk_usbphy0",
.id = -1,
};
-static struct clk clk_h133 = {
- .name = "hclk133",
+static struct clk clk_sclk_usbphy1 = {
+ .name = "sclk_usbphy1",
.id = -1,
};
-static struct clk clk_p100 = {
- .name = "pclk100",
+static struct clk clk_pcmcdclk0 = {
+ .name = "pcmcdclk",
.id = -1,
};
-static struct clk clk_p83 = {
- .name = "pclk83",
+static struct clk clk_pcmcdclk1 = {
+ .name = "pcmcdclk",
.id = -1,
};
-static struct clk clk_p66 = {
- .name = "pclk66",
+static struct clk clk_pcmcdclk2 = {
+ .name = "pcmcdclk",
.id = -1,
};
-static struct clk *sys_clks[] = {
- &clk_h200,
- &clk_h100,
- &clk_h166,
- &clk_h133,
- &clk_p100,
- &clk_p83,
- &clk_p66
+static struct clk *clkset_vpllsrc_list[] = {
+ [0] = &clk_fin_vpll,
+ [1] = &clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources clkset_vpllsrc = {
+ .sources = clkset_vpllsrc_list,
+ .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk clk_vpllsrc = {
+ .clk = {
+ .name = "vpll_src",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 7),
+ },
+ .sources = &clkset_vpllsrc,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 28, .size = 1 },
+};
+
+static struct clk *clkset_sclk_vpll_list[] = {
+ [0] = &clk_vpllsrc.clk,
+ [1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources clkset_sclk_vpll = {
+ .sources = clkset_sclk_vpll_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk clk_sclk_vpll = {
+ .clk = {
+ .name = "sclk_vpll",
+ .id = -1,
+ },
+ .sources = &clkset_sclk_vpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
+};
+
+static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk_ops clk_hclk_imem_ops = {
+ .get_rate = s5pv210_clk_imem_get_rate,
};
static struct clk init_clocks_disable[] = {
{
.name = "rot",
.id = -1,
- .parent = &clk_h166,
+ .parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
.ctrlbit = (1<<29),
}, {
.name = "otg",
.id = -1,
- .parent = &clk_h133,
+ .parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip1_ctrl,
.ctrlbit = (1<<16),
}, {
.name = "usb-host",
.id = -1,
- .parent = &clk_h133,
+ .parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip1_ctrl,
.ctrlbit = (1<<17),
}, {
.name = "lcd",
.id = -1,
- .parent = &clk_h166,
+ .parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip1_ctrl,
.ctrlbit = (1<<0),
}, {
.name = "cfcon",
.id = 0,
- .parent = &clk_h133,
+ .parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip1_ctrl,
.ctrlbit = (1<<25),
}, {
.name = "hsmmc",
.id = 0,
- .parent = &clk_h133,
+ .parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip2_ctrl,
.ctrlbit = (1<<16),
}, {
.name = "hsmmc",
.id = 1,
- .parent = &clk_h133,
+ .parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip2_ctrl,
.ctrlbit = (1<<17),
}, {
.name = "hsmmc",
.id = 2,
- .parent = &clk_h133,
+ .parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip2_ctrl,
.ctrlbit = (1<<18),
}, {
.name = "hsmmc",
.id = 3,
- .parent = &clk_h133,
+ .parent = &clk_hclk_psys.clk,
.enable = s5pv210_clk_ip2_ctrl,
.ctrlbit = (1<<19),
}, {
.name = "systimer",
.id = -1,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<16),
}, {
.name = "watchdog",
.id = -1,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<22),
}, {
.name = "rtc",
.id = -1,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<15),
}, {
.name = "i2c",
.id = 0,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<7),
}, {
.name = "i2c",
.id = 1,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<8),
}, {
.name = "i2c",
.id = 2,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<9),
}, {
.name = "spi",
.id = 0,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<12),
}, {
.name = "spi",
.id = 1,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<13),
}, {
.name = "spi",
.id = 2,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<14),
}, {
.name = "timers",
.id = -1,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<23),
}, {
.name = "adc",
.id = -1,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<24),
}, {
.name = "keypad",
.id = -1,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<21),
}, {
static struct clk init_clocks[] = {
{
+ .name = "hclk_imem",
+ .id = -1,
+ .parent = &clk_hclk_msys.clk,
+ .ctrlbit = (1 << 5),
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ops = &clk_hclk_imem_ops,
+ }, {
.name = "uart",
.id = 0,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<7),
}, {
.name = "uart",
.id = 1,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<8),
}, {
.name = "uart",
.id = 2,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<9),
}, {
.name = "uart",
.id = 3,
- .parent = &clk_p66,
+ .parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
.ctrlbit = (1<<10),
},
};
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
+static struct clk *clkset_uart_list[] = {
+ [6] = &clk_mout_mpll.clk,
+ [7] = &clk_mout_epll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_group1_list[] = {
+ [0] = &clk_sclk_a2m.clk,
+ [1] = &clk_mout_mpll.clk,
+ [2] = &clk_mout_epll.clk,
+ [3] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_group1 = {
+ .sources = clkset_group1_list,
+ .nr_sources = ARRAY_SIZE(clkset_group1_list),
+};
+
+static struct clk *clkset_sclk_onenand_list[] = {
+ [0] = &clk_hclk_psys.clk,
+ [1] = &clk_hclk_dsys.clk,
+};
+
+static struct clksrc_sources clkset_sclk_onenand = {
+ .sources = clkset_sclk_onenand_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_onenand_list),
+};
+
+static struct clk *clkset_sclk_dac_list[] = {
+ [0] = &clk_sclk_vpll.clk,
+ [1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_dac = {
+ .sources = clkset_sclk_dac_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk clk_sclk_dac = {
+ .clk = {
+ .name = "sclk_dac",
.id = -1,
+ .ctrlbit = (1 << 10),
+ .enable = s5pv210_clk_ip1_ctrl,
},
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+ .sources = &clkset_sclk_dac,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 1 },
};
-static struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
+static struct clksrc_clk clk_sclk_pixel = {
+ .clk = {
+ .name = "sclk_pixel",
.id = -1,
+ .parent = &clk_sclk_vpll.clk,
},
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4},
};
-static struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
+static struct clk *clkset_sclk_hdmi_list[] = {
+ [0] = &clk_sclk_pixel.clk,
+ [1] = &clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources clkset_sclk_hdmi = {
+ .sources = clkset_sclk_hdmi_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk clk_sclk_hdmi = {
+ .clk = {
+ .name = "sclk_hdmi",
.id = -1,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 11),
},
- .sources = &clk_src_mpll,
- .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+ .sources = &clkset_sclk_hdmi,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
};
-static struct clk *clkset_uart_list[] = {
+static struct clk *clkset_sclk_mixer_list[] = {
+ [0] = &clk_sclk_dac.clk,
+ [1] = &clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources clkset_sclk_mixer = {
+ .sources = clkset_sclk_mixer_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list),
+};
+
+static struct clk *clkset_sclk_audio0_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &clk_pcmcdclk0,
+ [2] = &clk_sclk_hdmi27m,
+ [3] = &clk_sclk_usbphy0,
+ [4] = &clk_sclk_usbphy1,
+ [5] = &clk_sclk_hdmiphy,
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
+ [8] = &clk_sclk_vpll.clk,
};
-static struct clksrc_sources clkset_uart = {
- .sources = clkset_uart_list,
- .nr_sources = ARRAY_SIZE(clkset_uart_list),
+static struct clksrc_sources clkset_sclk_audio0 = {
+ .sources = clkset_sclk_audio0_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list),
+};
+
+static struct clksrc_clk clk_sclk_audio0 = {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 0,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_sclk_audio0,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV6, .shift = 0, .size = 4 },
+};
+
+static struct clk *clkset_sclk_audio1_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &clk_pcmcdclk1,
+ [2] = &clk_sclk_hdmi27m,
+ [3] = &clk_sclk_usbphy0,
+ [4] = &clk_sclk_usbphy1,
+ [5] = &clk_sclk_hdmiphy,
+ [6] = &clk_mout_mpll.clk,
+ [7] = &clk_mout_epll.clk,
+ [8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_sclk_audio1 = {
+ .sources = clkset_sclk_audio1_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_audio1_list),
+};
+
+static struct clksrc_clk clk_sclk_audio1 = {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 1,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 5),
+ },
+ .sources = &clkset_sclk_audio1,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV6, .shift = 4, .size = 4 },
+};
+
+static struct clk *clkset_sclk_audio2_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &clk_pcmcdclk0,
+ [2] = &clk_sclk_hdmi27m,
+ [3] = &clk_sclk_usbphy0,
+ [4] = &clk_sclk_usbphy1,
+ [5] = &clk_sclk_hdmiphy,
+ [6] = &clk_mout_mpll.clk,
+ [7] = &clk_mout_epll.clk,
+ [8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_sclk_audio2 = {
+ .sources = clkset_sclk_audio2_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_audio2_list),
+};
+
+static struct clksrc_clk clk_sclk_audio2 = {
+ .clk = {
+ .name = "sclk_audio",
+ .id = 2,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 6),
+ },
+ .sources = &clkset_sclk_audio2,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV6, .shift = 8, .size = 4 },
+};
+
+static struct clk *clkset_sclk_spdif_list[] = {
+ [0] = &clk_sclk_audio0.clk,
+ [1] = &clk_sclk_audio1.clk,
+ [2] = &clk_sclk_audio2.clk,
+};
+
+static struct clksrc_sources clkset_sclk_spdif = {
+ .sources = clkset_sclk_spdif_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_spdif_list),
+};
+
+static struct clk *clkset_group2_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &clk_xusbxti,
+ [2] = &clk_sclk_hdmi27m,
+ [3] = &clk_sclk_usbphy0,
+ [4] = &clk_sclk_usbphy1,
+ [5] = &clk_sclk_hdmiphy,
+ [6] = &clk_mout_mpll.clk,
+ [7] = &clk_mout_epll.clk,
+ [8] = &clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources clkset_group2 = {
+ .sources = clkset_group2_list,
+ .nr_sources = ARRAY_SIZE(clkset_group2_list),
};
static struct clksrc_clk clksrcs[] = {
{
.clk = {
- .name = "uclk1",
+ .name = "sclk_dmc",
.id = -1,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_onenand",
+ .id = -1,
+ },
+ .sources = &clkset_sclk_onenand,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 28, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = 0,
.ctrlbit = (1<<17),
.enable = s5pv210_clk_ip3_ctrl,
},
.sources = &clkset_uart,
.reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
- }
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = 1,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 18),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = 2,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 19),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "uclk1",
+ .id = 3,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mixer",
+ .id = -1,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 9),
+ },
+ .sources = &clkset_sclk_mixer,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
+ }, {
+ .clk = {
+ .name = "sclk_spdif",
+ .id = -1,
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 27),
+ },
+ .sources = &clkset_sclk_spdif,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 0,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 1,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 25),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .id = 2,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 26),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam",
+ .id = 0,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam",
+ .id = 1,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .id = -1,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 0,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 1,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1 << 17),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 2,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1 << 18),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mmc",
+ .id = 3,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1 << 19),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mfc",
+ .id = -1,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_g2d",
+ .id = -1,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_g3d",
+ .id = -1,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .id = -1,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 31),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 0,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_spi",
+ .id = 1,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 13),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_pwi",
+ .id = -1,
+ .enable = &s5pv210_clk_ip4_ctrl,
+ .ctrlbit = (1 << 2),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC6, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV6, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_pwm",
+ .id = -1,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1 << 23),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC5, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV5, .shift = 12, .size = 4 },
+ },
};
/* Clock initialisation code */
-static struct clksrc_clk *init_parents[] = {
+static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
&clk_mout_epll,
&clk_mout_mpll,
+ &clk_armclk,
+ &clk_hclk_msys,
+ &clk_sclk_a2m,
+ &clk_hclk_dsys,
+ &clk_hclk_psys,
+ &clk_pclk_msys,
+ &clk_pclk_dsys,
+ &clk_pclk_psys,
+ &clk_vpllsrc,
+ &clk_sclk_vpll,
+ &clk_sclk_dac,
+ &clk_sclk_pixel,
+ &clk_sclk_hdmi,
};
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
void __init_or_cpufreq s5pv210_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long xtal;
+ unsigned long vpllsrc;
unsigned long armclk;
- unsigned long hclk200;
- unsigned long hclk166;
- unsigned long hclk133;
- unsigned long pclk100;
- unsigned long pclk83;
- unsigned long pclk66;
+ unsigned long hclk_msys;
+ unsigned long hclk_dsys;
+ unsigned long hclk_psys;
+ unsigned long pclk_msys;
+ unsigned long pclk_dsys;
+ unsigned long pclk_psys;
unsigned long apll;
unsigned long mpll;
unsigned long epll;
+ unsigned long vpll;
unsigned int ptr;
u32 clkdiv0, clkdiv1;
apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
-
- printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld",
- apll, mpll, epll);
-
- armclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_APLL);
- if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX200_MASK)
- hclk200 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
- else
- hclk200 = armclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
-
- if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX166_MASK) {
- hclk166 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
- hclk166 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
- } else
- hclk166 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
-
- if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX133_MASK) {
- hclk133 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
- hclk133 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
- } else
- hclk133 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
-
- pclk100 = hclk200 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK100);
- pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83);
- pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66);
-
- printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \
- HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
- armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66);
+ vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+ vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502);
clk_fout_apll.rate = apll;
clk_fout_mpll.rate = mpll;
clk_fout_epll.rate = epll;
+ clk_fout_vpll.rate = vpll;
- clk_f.rate = armclk;
- clk_h.rate = hclk133;
- clk_p.rate = pclk66;
- clk_p66.rate = pclk66;
- clk_p83.rate = pclk83;
- clk_h133.rate = hclk133;
- clk_h166.rate = hclk166;
- clk_h200.rate = hclk200;
+ printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
+ apll, mpll, epll, vpll);
+
+ armclk = clk_get_rate(&clk_armclk.clk);
+ hclk_msys = clk_get_rate(&clk_hclk_msys.clk);
+ hclk_dsys = clk_get_rate(&clk_hclk_dsys.clk);
+ hclk_psys = clk_get_rate(&clk_hclk_psys.clk);
+ pclk_msys = clk_get_rate(&clk_pclk_msys.clk);
+ pclk_dsys = clk_get_rate(&clk_pclk_dsys.clk);
+ pclk_psys = clk_get_rate(&clk_pclk_psys.clk);
+
+ printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld\n"
+ "HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
+ armclk, hclk_msys, hclk_dsys, hclk_psys,
+ pclk_msys, pclk_dsys, pclk_psys);
- for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
- s3c_set_clksrc(init_parents[ptr], true);
+ clk_f.rate = armclk;
+ clk_h.rate = hclk_psys;
+ clk_p.rate = pclk_psys;
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_set_clksrc(&clksrcs[ptr], true);
}
static struct clk *clks[] __initdata = {
- &clk_mout_epll.clk,
- &clk_mout_mpll.clk,
+ &clk_sclk_hdmi27m,
+ &clk_sclk_hdmiphy,
+ &clk_sclk_usbphy0,
+ &clk_sclk_usbphy1,
+ &clk_pcmcdclk0,
+ &clk_pcmcdclk1,
+ &clk_pcmcdclk2,
};
void __init s5pv210_register_clocks(void)
if (ret > 0)
printk(KERN_ERR "Failed to register %u clocks\n", ret);
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
- ret = s3c24xx_register_clocks(sys_clks, ARRAY_SIZE(sys_clks));
- if (ret > 0)
- printk(KERN_ERR "Failed to register system clocks\n");
-
clkp = init_clocks_disable;
for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
ret = s3c24xx_register_clock(clkp);
s5p_init_irq(vic, ARRAY_SIZE(vic));
}
-static struct sysdev_class s5pv210_sysclass = {
+struct sysdev_class s5pv210_sysclass = {
.name = "s5pv210-core",
};
--- /dev/null
+/* linux/arch/arm/mach-s5pv210/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/gpio.h>
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static int s5pv210_cfg_i2s(struct platform_device *pdev)
+{
+ /* configure GPIO for i2s port */
+ switch (pdev->id) {
+ case 1:
+ s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2));
+ break;
+
+ case 2:
+ s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4));
+ break;
+
+ case -1:
+ s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2));
+ break;
+
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_i2s_pdata = {
+ .cfg_gpio = s5pv210_cfg_i2s,
+};
+
+static struct resource s5pv210_iis0_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_IIS0,
+ .end = S5PV210_PA_IIS0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_TX,
+ .end = DMACH_I2S0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_RX,
+ .end = DMACH_I2S0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv210_device_iis0 = {
+ .name = "s3c64xx-iis-v4",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pv210_iis0_resource),
+ .resource = s5pv210_iis0_resource,
+ .dev = {
+ .platform_data = &s3c_i2s_pdata,
+ },
+};
+
+static struct resource s5pv210_iis1_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_IIS1,
+ .end = S5PV210_PA_IIS1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S1_TX,
+ .end = DMACH_I2S1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S1_RX,
+ .end = DMACH_I2S1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv210_device_iis1 = {
+ .name = "s3c64xx-iis",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pv210_iis1_resource),
+ .resource = s5pv210_iis1_resource,
+ .dev = {
+ .platform_data = &s3c_i2s_pdata,
+ },
+};
+
+static struct resource s5pv210_iis2_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_IIS2,
+ .end = S5PV210_PA_IIS2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S2_TX,
+ .end = DMACH_I2S2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S2_RX,
+ .end = DMACH_I2S2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv210_device_iis2 = {
+ .name = "s3c64xx-iis",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5pv210_iis2_resource),
+ .resource = s5pv210_iis2_resource,
+ .dev = {
+ .platform_data = &s3c_i2s_pdata,
+ },
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3));
+ break;
+ case 1:
+ s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3));
+ s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3));
+ break;
+ case 2:
+ s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2));
+ break;
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+ .cfg_gpio = s5pv210_pcm_cfg_gpio,
+};
+
+static struct resource s5pv210_pcm0_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_PCM0,
+ .end = S5PV210_PA_PCM0 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv210_device_pcm0 = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5pv210_pcm0_resource),
+ .resource = s5pv210_pcm0_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource s5pv210_pcm1_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_PCM1,
+ .end = S5PV210_PA_PCM1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM1_TX,
+ .end = DMACH_PCM1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM1_RX,
+ .end = DMACH_PCM1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv210_device_pcm1 = {
+ .name = "samsung-pcm",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pv210_pcm1_resource),
+ .resource = s5pv210_pcm1_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+static struct resource s5pv210_pcm2_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_PCM2,
+ .end = S5PV210_PA_PCM2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM2_TX,
+ .end = DMACH_PCM2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM2_RX,
+ .end = DMACH_PCM2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5pv210_device_pcm2 = {
+ .name = "samsung-pcm",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5pv210_pcm2_resource),
+ .resource = s5pv210_pcm2_resource,
+ .dev = {
+ .platform_data = &s3c_pcm_pdata,
+ },
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4));
+ s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4));
+
+ return 0;
+}
+
+static struct resource s5pv210_ac97_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_AC97,
+ .end = S5PV210_PA_AC97 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_AC97_PCMOUT,
+ .end = DMACH_AC97_PCMOUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_AC97_PCMIN,
+ .end = DMACH_AC97_PCMIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_AC97_MICIN,
+ .end = DMACH_AC97_MICIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+ .cfg_gpio = s5pv210_ac97_cfg_gpio,
+};
+
+static u64 s5pv210_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv210_device_ac97 = {
+ .name = "s3c-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pv210_ac97_resource),
+ .resource = s5pv210_ac97_resource,
+ .dev = {
+ .platform_data = &s3c_ac97_pdata,
+ .dma_mask = &s5pv210_ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5pv210_pdma0_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_PDMA0,
+ .end = S5PV210_PA_PDMA0 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PDMA0,
+ .end = IRQ_PDMA0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
+ .peri = {
+ [0] = DMACH_UART0_RX,
+ [1] = DMACH_UART0_TX,
+ [2] = DMACH_UART1_RX,
+ [3] = DMACH_UART1_TX,
+ [4] = DMACH_UART2_RX,
+ [5] = DMACH_UART2_TX,
+ [6] = DMACH_UART3_RX,
+ [7] = DMACH_UART3_TX,
+ [8] = DMACH_MAX,
+ [9] = DMACH_I2S0_RX,
+ [10] = DMACH_I2S0_TX,
+ [11] = DMACH_I2S0S_TX,
+ [12] = DMACH_I2S1_RX,
+ [13] = DMACH_I2S1_TX,
+ [14] = DMACH_MAX,
+ [15] = DMACH_MAX,
+ [16] = DMACH_SPI0_RX,
+ [17] = DMACH_SPI0_TX,
+ [18] = DMACH_SPI1_RX,
+ [19] = DMACH_SPI1_TX,
+ [20] = DMACH_MAX,
+ [21] = DMACH_MAX,
+ [22] = DMACH_AC97_MICIN,
+ [23] = DMACH_AC97_PCMIN,
+ [24] = DMACH_AC97_PCMOUT,
+ [25] = DMACH_MAX,
+ [26] = DMACH_PWM,
+ [27] = DMACH_SPDIF,
+ [28] = DMACH_MAX,
+ [29] = DMACH_MAX,
+ [30] = DMACH_MAX,
+ [31] = DMACH_MAX,
+ },
+};
+
+static struct platform_device s5pv210_device_pdma0 = {
+ .name = "s3c-pl330",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource),
+ .resource = s5pv210_pdma0_resource,
+ .dev = {
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s5pv210_pdma0_pdata,
+ },
+};
+
+static struct resource s5pv210_pdma1_resource[] = {
+ [0] = {
+ .start = S5PV210_PA_PDMA1,
+ .end = S5PV210_PA_PDMA1 + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PDMA1,
+ .end = IRQ_PDMA1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
+ .peri = {
+ [0] = DMACH_UART0_RX,
+ [1] = DMACH_UART0_TX,
+ [2] = DMACH_UART1_RX,
+ [3] = DMACH_UART1_TX,
+ [4] = DMACH_UART2_RX,
+ [5] = DMACH_UART2_TX,
+ [6] = DMACH_UART3_RX,
+ [7] = DMACH_UART3_TX,
+ [8] = DMACH_MAX,
+ [9] = DMACH_I2S0_RX,
+ [10] = DMACH_I2S0_TX,
+ [11] = DMACH_I2S0S_TX,
+ [12] = DMACH_I2S1_RX,
+ [13] = DMACH_I2S1_TX,
+ [14] = DMACH_I2S2_RX,
+ [15] = DMACH_I2S2_TX,
+ [16] = DMACH_SPI0_RX,
+ [17] = DMACH_SPI0_TX,
+ [18] = DMACH_SPI1_RX,
+ [19] = DMACH_SPI1_TX,
+ [20] = DMACH_MAX,
+ [21] = DMACH_MAX,
+ [22] = DMACH_PCM0_RX,
+ [23] = DMACH_PCM0_TX,
+ [24] = DMACH_PCM1_RX,
+ [25] = DMACH_PCM1_TX,
+ [26] = DMACH_MSM_REQ0,
+ [27] = DMACH_MSM_REQ1,
+ [28] = DMACH_MSM_REQ2,
+ [29] = DMACH_MSM_REQ3,
+ [30] = DMACH_PCM2_RX,
+ [31] = DMACH_PCM2_TX,
+ },
+};
+
+static struct platform_device s5pv210_device_pdma1 = {
+ .name = "s3c-pl330",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource),
+ .resource = s5pv210_pdma1_resource,
+ .dev = {
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &s5pv210_pdma1_pdata,
+ },
+};
+
+static struct platform_device *s5pv210_dmacs[] __initdata = {
+ &s5pv210_device_pdma0,
+ &s5pv210_device_pdma1,
+};
+
+static int __init s5pv210_dma_init(void)
+{
+ platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs));
+
+ return 0;
+}
+arch_initcall(s5pv210_dma_init);
--- /dev/null
+/* linux/arch/arm/mach-s5pv210/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/map.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+/* GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in v210.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
+ {
+ .chip = {
+ .base = S5PV210_GPA0(0),
+ .ngpio = S5PV210_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPA1(0),
+ .ngpio = S5PV210_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPB(0),
+ .ngpio = S5PV210_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPC0(0),
+ .ngpio = S5PV210_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPC1(0),
+ .ngpio = S5PV210_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPD0(0),
+ .ngpio = S5PV210_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPD1(0),
+ .ngpio = S5PV210_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPE0(0),
+ .ngpio = S5PV210_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPE1(0),
+ .ngpio = S5PV210_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF0(0),
+ .ngpio = S5PV210_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF1(0),
+ .ngpio = S5PV210_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF2(0),
+ .ngpio = S5PV210_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPF3(0),
+ .ngpio = S5PV210_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG0(0),
+ .ngpio = S5PV210_GPIO_G0_NR,
+ .label = "GPG0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG1(0),
+ .ngpio = S5PV210_GPIO_G1_NR,
+ .label = "GPG1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG2(0),
+ .ngpio = S5PV210_GPIO_G2_NR,
+ .label = "GPG2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPG3(0),
+ .ngpio = S5PV210_GPIO_G3_NR,
+ .label = "GPG3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPI(0),
+ .ngpio = S5PV210_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ0(0),
+ .ngpio = S5PV210_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ1(0),
+ .ngpio = S5PV210_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ2(0),
+ .ngpio = S5PV210_GPIO_J2_NR,
+ .label = "GPJ2",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ3(0),
+ .ngpio = S5PV210_GPIO_J3_NR,
+ .label = "GPJ3",
+ },
+ }, {
+ .chip = {
+ .base = S5PV210_GPJ4(0),
+ .ngpio = S5PV210_GPIO_J4_NR,
+ .label = "GPJ4",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_MP01(0),
+ .ngpio = S5PV210_GPIO_MP01_NR,
+ .label = "MP01",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_MP02(0),
+ .ngpio = S5PV210_GPIO_MP02_NR,
+ .label = "MP02",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_MP03(0),
+ .ngpio = S5PV210_GPIO_MP03_NR,
+ .label = "MP03",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC00),
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_GPH0(0),
+ .ngpio = S5PV210_GPIO_H0_NR,
+ .label = "GPH0",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC20),
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_GPH1(0),
+ .ngpio = S5PV210_GPIO_H1_NR,
+ .label = "GPH1",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC40),
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_GPH2(0),
+ .ngpio = S5PV210_GPIO_H2_NR,
+ .label = "GPH2",
+ },
+ }, {
+ .base = (S5P_VA_GPIO + 0xC60),
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = S5PV210_GPH3(0),
+ .ngpio = S5PV210_GPIO_H3_NR,
+ .label = "GPH3",
+ },
+ },
+};
+
+static __init int s5pv210_gpiolib_init(void)
+{
+ struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
+ int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
+ int i = 0;
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL)
+ chip->config = &gpio_cfg;
+ if (chip->base == NULL)
+ chip->base = S5PV210_BANK_BASE(i);
+ }
+
+ samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips);
+
+ return 0;
+}
+core_initcall(s5pv210_gpiolib_init);
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
+/* Practically, GPIO banks upto MP03 are the configurable gpio banks */
+
/* GPIO bank sizes */
#define S5PV210_GPIO_A0_NR (8)
#define S5PV210_GPIO_A1_NR (4)
#define S5PV210_GPIO_J3_NR (8)
#define S5PV210_GPIO_J4_NR (5)
+#define S5PV210_GPIO_MP01_NR (8)
+#define S5PV210_GPIO_MP02_NR (4)
+#define S5PV210_GPIO_MP03_NR (8)
+
/* GPIO bank numbers */
/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+ S5PV210_GPIO_MP01_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
+ S5PV210_GPIO_MP02_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
+ S5PV210_GPIO_MP03_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
};
/* S5PV210 GPIO number definitions */
#define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr))
#define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr))
#define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr))
+#define S5PV210_MP01(_nr) (S5PV210_GPIO_MP01_START + (_nr))
+#define S5PV210_MP02(_nr) (S5PV210_GPIO_MP02_START + (_nr))
+#define S5PV210_MP03(_nr) (S5PV210_GPIO_MP03_START + (_nr))
/* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1)
+#define S5PV210_GPIO_END (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
#define S3C_GPIO_END S5PV210_GPIO_END
-/* define the number of gpios we need to the one after the GPJ4() range */
-#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \
+/* define the number of gpios we need to the one after the MP03() range */
+#define ARCH_NR_GPIOS (S5PV210_MP03(S5PV210_GPIO_MP03_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
#include <asm-generic/gpio.h>
#define S5PV210_PA_SROMC (0xE8000000)
+#define S5PV210_PA_MDMA 0xFA200000
+#define S5PV210_PA_PDMA0 0xE0900000
+#define S5PV210_PA_PDMA1 0xE0A00000
+
#define S5PV210_PA_VIC0 (0xF2000000)
#define S5P_PA_VIC0 S5PV210_PA_VIC0
#define S5PV210_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+/* I2S */
+#define S5PV210_PA_IIS0 0xEEE30000
+#define S5PV210_PA_IIS1 0xE2100000
+#define S5PV210_PA_IIS2 0xE2A00000
+
+/* PCM */
+#define S5PV210_PA_PCM0 0xE2300000
+#define S5PV210_PA_PCM1 0xE1200000
+#define S5PV210_PA_PCM2 0xE2B00000
+
+/* AC97 */
+#define S5PV210_PA_AC97 0xE2200000
+
/* compatibiltiy defines. */
#define S3C_PA_UART S5PV210_PA_UART
#define S3C_PA_IIC S5PV210_PA_IIC0
/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
*
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
*
* S5PV210 - pwm clock and timer support
*
/**
* pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
- * @cfg: The timer TCFG1 register bits shifted down to 0.
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
*
* Return true if the given configuration from TCFG1 is a TCLK instead
* any of the TDIV clocks.
*/
static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
{
- return tcfg == S3C2410_TCFG1_MUX_TCLK;
+ return tcfg == S3C64XX_TCFG1_MUX_TCLK;
}
/**
*/
static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
{
- return 1 << (1 + tcfg1);
+ return 1 << tcfg1;
}
/**
*/
static inline unsigned int pwm_tdiv_has_div1(void)
{
- return 0;
+ return 1;
}
/**
*/
static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
{
- return ilog2(div) - 1;
+ return ilog2(div);
}
-#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
#endif /* __ASM_ARCH_PWMCLK_H */
};
static struct platform_device *smdkc110_devices[] __initdata = {
+ &s5pv210_device_iis0,
+ &s5pv210_device_ac97,
};
static void __init smdkc110_map_io(void)
};
static struct platform_device *smdkv210_devices[] __initdata = {
+ &s5pv210_device_iis0,
+ &s5pv210_device_ac97,
};
static void __init smdkv210_map_io(void)
--- /dev/null
+/* linux/arch/arm/mach-s5pv210/setup-i2c0.c
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Will be populated later */
+}
if (machine_is_p720t())
res_size = 0x00014000;
- /* H1940 and RX3715 need to reserve this for suspend */
+ /* H1940, RX3715 and RX1950 need to reserve this for suspend */
- if (machine_is_h1940() || machine_is_rx3715()) {
+ if (machine_is_h1940() || machine_is_rx3715()
+ || machine_is_rx1950()) {
reserve_bootmem_node(pgdat, 0x30003000, 0x1000,
BOOTMEM_DEFAULT);
reserve_bootmem_node(pgdat, 0x30081000, 0x1000,
help
Add audio devices for common Simtec S3C24XX boards
+config S3C2410_SETUP_TS
+ bool
+ help
+ Compile in platform device definition for Samsung TouchScreen.
+
endif
# device specific setup and/or initialisation
obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
+obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o
# SPI gpio central GPIO functions
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/string.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/regs-spi.h>
-
-#include <mach/ts.h>
+#include <plat/ts.h>
/* Serial port registrations */
{
struct s3c2410fb_mach_info *npd;
- npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+ npd = kmemdup(pd, sizeof(*npd), GFP_KERNEL);
if (npd) {
- memcpy(npd, pd, sizeof(*npd));
s3c_device_lcd.dev.platform_data = npd;
+ npd->displays = kmemdup(pd->displays,
+ sizeof(struct s3c2410fb_display) * npd->num_displays,
+ GFP_KERNEL);
+ if (!npd->displays)
+ printk(KERN_ERR "no memory for LCD display data\n");
} else {
printk(KERN_ERR "no memory for LCD platform data\n");
}
.resource = s3c_adc_resource,
};
-/* HWMON */
-
-struct platform_device s3c_device_hwmon = {
- .name = "s3c-hwmon",
- .id = -1,
- .dev.parent = &s3c_device_adc.dev,
-};
-
/* SDI */
static struct resource s3c_sdi_resource[] = {
EXPORT_SYMBOL(s3c_device_sdi);
-void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
+void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
{
struct s3c24xx_mci_pdata *npd;
* devaddr: physical address of the source
*/
-int s3c2410_dma_devconfig(int channel,
+int s3c2410_dma_devconfig(unsigned int channel,
enum s3c2410_dmasrc source,
unsigned long devaddr)
{
#include <mach/regs-gpio.h>
+#include <plat/gpio-core.h>
+
/* gpiolib wrappers until these are totally eliminated */
void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
unsigned int s3c2410_gpio_getpin(unsigned int pin)
{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned long offs = pin - chip->chip.base;
- return __raw_readl(base + 0x04) & (1<< offs);
+ return __raw_readl(chip->base + 0x04) & (1<< offs);
}
EXPORT_SYMBOL(s3c2410_gpio_getpin);
--- /dev/null
+/* linux/arch/arm/plat-s3c24xx/setup-ts.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on S3C24XX setup for i2c device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+/**
+ * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
+ *
+ * Configure the GPIO for the S3C2410 system, where we have external FETs
+ * connected to the device (later systems such as the S3C2440 integrate
+ * these into the device).
+ */
+void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
+{
+ s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+}
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
select S3C_GPIO_TRACK
+ select S5P_GPIO_DRVSTR
select SAMSUNG_GPIOLIB_4BIT
select S3C_GPIO_CFG_S3C64XX
select S3C_GPIO_PULL_UPDOWN
obj-y += cpu.o
obj-y += clock.o
obj-y += irq.o
-obj-y += setup-i2c0.o
.id = -1,
};
-static struct clk s5p_clk_27m = {
+struct clk clk_xusbxti = {
+ .name = "xusbxti",
+ .id = -1,
+};
+
+struct clk s5p_clk_27m = {
.name = "clk_27m",
.id = -1,
.rate = 27000000,
.ctrlbit = (1 << 31),
};
+/* VPLL clock output */
+struct clk clk_fout_vpll = {
+ .name = "fout_vpll",
+ .id = -1,
+ .ctrlbit = (1 << 31),
+};
+
/* ARM clock */
struct clk clk_arm = {
.name = "armclk",
&clk_fout_apll,
&clk_fout_mpll,
&clk_fout_epll,
+ &clk_fout_vpll,
&clk_arm,
&clk_vpll,
};
#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
+#define S5P_TIMER_IRQ(x) (11 + (x))
#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
return result;
}
+
+#define PLL65XX_MDIV_MASK (0x3FF)
+#define PLL65XX_PDIV_MASK (0x3F)
+#define PLL65XX_SDIV_MASK (0x7)
+#define PLL65XX_MDIV_SHIFT (16)
+#define PLL65XX_PDIV_SHIFT (8)
+#define PLL65XX_SDIV_SHIFT (0)
+
+static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
+ pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
+ sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
#define clk_fin_mpll clk_ext_xtal_mux
#define clk_fin_epll clk_ext_xtal_mux
#define clk_fin_vpll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
extern struct clk clk_ext_xtal_mux;
+extern struct clk clk_xusbxti;
extern struct clk clk_48m;
+extern struct clk s5p_clk_27m;
extern struct clk clk_fout_apll;
extern struct clk clk_fout_mpll;
extern struct clk clk_fout_epll;
+extern struct clk clk_fout_vpll;
extern struct clk clk_arm;
extern struct clk clk_vpll;
select SAMSUNG_IRQ_VIC_TIMER
select S3C_GPIO_TRACK
select S3C_GPIO_PULL_UPDOWN
+ select S5P_GPIO_DRVSTR
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
- select S5P_GPIO_CFG_S5PC1XX
+ select SAMSUNG_GPIOLIB_4BIT
help
Base platform code for any Samsung S5PC1XX device
# platform specific device setup
-config S5PC1XX_SETUP_FB_24BPP
- bool
- help
- Common setup code for S5PC1XX with an 24bpp RGB display helper.
-
-config S5PC1XX_SETUP_I2C0
- bool
- default y
- help
- Common setup code for i2c bus 0.
-
- Note, currently since i2c0 is always compiled, this setup helper
- is always compiled with it.
-
-config S5PC1XX_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
config S5PC1XX_SETUP_SDHCI_GPIO
bool
help
obj-y += dev-uart.o
obj-y += cpu.o
-obj-y += irq.o irq-gpio.o irq-eint.o
+obj-y += irq.o
obj-y += clock.o
-obj-y += gpiolib.o
# CPU support
# Device setup
-obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
-obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+++ /dev/null
-/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
- *
- * Copyright 2009 Samsung Electronics
- *
- * S5PC1XX GPIO Configuration.
- *
- * Based on plat-s3c64xx/gpio-config.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg-s5pc1xx.h>
-
-s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 drvstr;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- drvstr = __raw_readl(reg);
- drvstr = 0xffff & (0x3 << shift);
- drvstr = drvstr >> shift;
-
- return (__force s5p_gpio_drvstr_t)drvstr;
-}
-EXPORT_SYMBOL(s5p_gpio_get_drvstr);
-
-int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr)
-{
- struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
- void __iomem *reg;
- int shift = off * 2;
- u32 tmp;
-
- if (!chip)
- return -EINVAL;
-
- reg = chip->base + 0x0C;
-
- tmp = __raw_readl(reg);
- tmp |= drvstr << shift;
-
- __raw_writel(tmp, reg);
-
- return 0;
-}
-EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+++ /dev/null
-/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
- *
- * Copyright 2009 Samsung Electronic
- *
- * S5PC1XX Platform - GPIO pin configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* This file contains the necessary definitions to get the basic gpio
- * pin configuration done such as setting a pin to input or output or
- * changing the pull-{up,down} configurations.
- */
-
-#ifndef __GPIO_CFG_S5PC1XX_H
-#define __GPIO_CFG_S5PC1XX_H __FILE__
-
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
-
-#define S5P_GPIO_DRVSTR_LV1 0x00
-#define S5P_GPIO_DRVSTR_LV2 0x01
-#define S5P_GPIO_DRVSTR_LV3 0x10
-#define S5P_GPIO_DRVSTR_LV4 0x11
-
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
-
-extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
- s5p_gpio_drvstr_t drvstr);
-
-#endif /* __GPIO_CFG_S5PC1XX_H */
Internal configuration to enable S3C64XX style GPIO configuration
functions.
-config S5P_GPIO_CFG_S5PC1XX
- bool
- help
- Internal configuration to enable S5PC1XX style GPIO configuration
- functions.
-
config S3C_GPIO_PULL_UPDOWN
bool
help
help
Internal configuration to enable the correct GPIO pull helper
+config S5P_GPIO_DRVSTR
+ bool
+ help
+ Internal configuration to get and set correct GPIO driver strength
+ helper
+
config SAMSUNG_GPIO_EXTRA
int "Number of additional GPIO pins"
default 0
help
Compile in platform device definitions for HSMMC channel 2
+config S3C_DEV_HWMON
+ bool
+ help
+ Compile in platform device definitions for HWMON
+
config S3C_DEV_I2C1
bool
help
help
Compile in platform device definition for NAND controller
+config S3C_DEV_RTC
+ bool
+ help
+ Complie in platform device definition for RTC
+
+config SAMSUNG_DEV_ADC
+ bool
+ help
+ Compile in platform device definition for ADC controller
+
config S3C64XX_DEV_SPI
bool
help
Compile in platform device definitions for S3C64XX's type
SPI controllers.
+config SAMSUNG_DEV_TS
+ bool
+ help
+ Common in platform device definitions for touchscreen device
+
# DMA
config S3C_DMA
help
Internal configuration for S3C DMA core
+config S3C_PL330_DMA
+ bool
+ select PL330
+ help
+ S3C DMA API Driver for PL330 DMAC.
+
comment "Power management"
config SAMSUNG_PM_DEBUG
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
+obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
+obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
+
+obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
+obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o
+obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o
+
# PM support
obj-$(CONFIG_PM) += pm.o
-/* linux/arch/arm/plat-s3c64xx/dev-adc.c
+/* linux/arch/arm/plat-samsung/dev-adc.c
*
* Copyright 2010 Maurus Cuelenaere
*
static struct resource s3c_adc_resource[] = {
[0] = {
- .start = S3C64XX_PA_ADC,
- .end = S3C64XX_PA_ADC + SZ_256 - 1,
+ .start = SAMSUNG_PA_ADC,
+ .end = SAMSUNG_PA_ADC + SZ_256 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
};
struct platform_device s3c_device_adc = {
- .name = "s3c64xx-adc",
+ .name = "samsung-adc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_adc_resource),
.resource = s3c_adc_resource,
#include <mach/irqs.h>
#include <mach/map.h>
-#include <mach/regs-fb.h>
#include <plat/fb.h>
#include <plat/devs.h>
--- /dev/null
+/* linux/arch/arm/plat-samsung/dev-hwmon.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Adapted for HWMON by Maurus Cuelenaere
+ *
+ * Samsung series device definition for HWMON
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/devs.h>
+#include <plat/hwmon.h>
+
+struct platform_device s3c_device_hwmon = {
+ .name = "s3c-hwmon",
+ .id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+};
+
+void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd)
+{
+ struct s3c_hwmon_pdata *npd;
+
+ if (!pd) {
+ printk(KERN_ERR "%s: no platform data\n", __func__);
+ return;
+ }
+
+ npd = kmemdup(pd, sizeof(struct s3c_hwmon_pdata), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ s3c_device_hwmon.dev.platform_data = npd;
+}
-/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
+/* linux/arch/arm/plat-samsung/dev-rtc.c
*
* Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
*
static struct resource s3c_rtc_resource[] = {
[0] = {
- .start = S3C64XX_PA_RTC,
- .end = S3C64XX_PA_RTC + 0xff,
- .flags = IORESOURCE_MEM,
+ .start = S3C_PA_RTC,
+ .end = S3C_PA_RTC + 0xff,
+ .flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_RTC_ALARM,
- .end = IRQ_RTC_ALARM,
- .flags = IORESOURCE_IRQ,
+ .start = IRQ_RTC_ALARM,
+ .end = IRQ_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
},
[2] = {
- .start = IRQ_RTC_TIC,
- .end = IRQ_RTC_TIC,
- .flags = IORESOURCE_IRQ
+ .start = IRQ_RTC_TIC,
+ .end = IRQ_RTC_TIC,
+ .flags = IORESOURCE_IRQ
}
};
struct platform_device s3c_device_rtc = {
- .name = "s3c64xx-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_rtc_resource),
- .resource = s3c_rtc_resource,
+ .name = "s3c64xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_rtc_resource),
+ .resource = s3c_rtc_resource,
};
EXPORT_SYMBOL(s3c_device_rtc);
--- /dev/null
+/* linux/arch/arm/mach-s3c64xx/dev-ts.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * Adapted by Maurus Cuelenaere for s3c64xx
+ *
+ * S3C64XX series device definition for touchscreen device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/ts.h>
+
+static struct resource s3c_ts_resource[] = {
+ [0] = {
+ .start = SAMSUNG_PA_ADC,
+ .end = SAMSUNG_PA_ADC + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TC,
+ .end = IRQ_TC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_ts = {
+ .name = "s3c64xx-ts",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_ts_resource),
+ .resource = s3c_ts_resource,
+};
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd)
+{
+ struct s3c2410_ts_mach_info *npd;
+
+ if (!pd) {
+ printk(KERN_ERR "%s: no platform data\n", __func__);
+ return;
+ }
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_ts_mach_info), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ s3c_device_ts.dev.platform_data = npd;
+}
+EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
offset = pin - chip->chip.base;
- local_irq_save(flags);
+ s3c_gpio_lock(chip, flags);
ret = s3c_gpio_do_setcfg(chip, offset, config);
- local_irq_restore(flags);
+ s3c_gpio_unlock(chip, flags);
return ret;
}
if (chip) {
offset = pin - chip->chip.base;
- local_irq_save(flags);
+ s3c_gpio_lock(chip, flags);
ret = s3c_gpio_do_getcfg(chip, offset);
- local_irq_restore(flags);
+ s3c_gpio_unlock(chip, flags);
}
return ret;
offset = pin - chip->chip.base;
- local_irq_save(flags);
+ s3c_gpio_lock(chip, flags);
ret = s3c_gpio_do_setpull(chip, offset, pull);
- local_irq_restore(flags);
+ s3c_gpio_unlock(chip, flags);
return ret;
}
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
+#ifdef CONFIG_S5P_GPIO_DRVSTR
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 drvstr;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ drvstr = __raw_readl(reg);
+ drvstr = 0xffff & (0x3 << shift);
+ drvstr = drvstr >> shift;
+
+ return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
+{
+ struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+ unsigned int off;
+ void __iomem *reg;
+ int shift;
+ u32 tmp;
+
+ if (!chip)
+ return -EINVAL;
+
+ off = chip->chip.base - pin;
+ shift = off * 2;
+ reg = chip->base + 0x0C;
+
+ tmp = __raw_readl(reg);
+ tmp |= drvstr << shift;
+
+ __raw_writel(tmp, reg);
+
+ return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
+#endif /* CONFIG_S5P_GPIO_DRVSTR */
#include <linux/init.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/spinlock.h>
#include <plat/gpio-core.h>
unsigned long flags;
unsigned long con;
- local_irq_save(flags);
+ s3c_gpio_lock(ourchip, flags);
con = __raw_readl(base + 0x00);
con &= ~(3 << (offset * 2));
__raw_writel(con, base + 0x00);
- local_irq_restore(flags);
+ s3c_gpio_unlock(ourchip, flags);
return 0;
}
unsigned long dat;
unsigned long con;
- local_irq_save(flags);
+ s3c_gpio_lock(ourchip, flags);
dat = __raw_readl(base + 0x04);
dat &= ~(1 << offset);
__raw_writel(con, base + 0x00);
__raw_writel(dat, base + 0x04);
- local_irq_restore(flags);
+ s3c_gpio_unlock(ourchip, flags);
return 0;
}
unsigned long flags;
unsigned long dat;
- local_irq_save(flags);
+ s3c_gpio_lock(ourchip, flags);
dat = __raw_readl(base + 0x04);
dat &= ~(1 << offset);
dat |= 1 << offset;
__raw_writel(dat, base + 0x04);
- local_irq_restore(flags);
+ s3c_gpio_unlock(ourchip, flags);
}
static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset)
BUG_ON(!gc->label);
BUG_ON(!gc->ngpio);
+ spin_lock_init(&chip->lock);
+
if (!gc->direction_input)
gc->direction_input = s3c_gpiolib_input;
if (!gc->direction_output)
extern struct clk clk_h2;
extern struct clk clk_27m;
extern struct clk clk_48m;
+extern struct clk clk_xusbxti;
extern int clk_default_setrate(struct clk *clk, unsigned long rate);
extern struct clk_ops clk_ops_def_setrate;
extern struct sysdev_class s3c2443_sysclass;
extern struct sysdev_class s3c6410_sysclass;
extern struct sysdev_class s3c64xx_sysclass;
+extern struct sysdev_class s5p6440_sysclass;
+extern struct sysdev_class s5p6442_sysclass;
+extern struct sysdev_class s5pv210_sysclass;
extern void (*s5pc1xx_idle)(void);
extern struct platform_device s3c_device_usbgadget;
extern struct platform_device s3c_device_usb_hsotg;
+extern struct platform_device s5pv210_device_ac97;
+extern struct platform_device s5pv210_device_pcm0;
+extern struct platform_device s5pv210_device_pcm1;
+extern struct platform_device s5pv210_device_pcm2;
+extern struct platform_device s5pv210_device_iis0;
+extern struct platform_device s5pv210_device_iis1;
+extern struct platform_device s5pv210_device_iis2;
+
+extern struct platform_device s5p6442_device_pcm0;
+extern struct platform_device s5p6442_device_pcm1;
+extern struct platform_device s5p6442_device_iis0;
+extern struct platform_device s5p6442_device_iis1;
+
+extern struct platform_device s5p6440_device_pcm;
+extern struct platform_device s5p6440_device_iis;
+
/* s3c2440 specific devices */
#ifdef CONFIG_CPU_S3C2440
* configure the device we're talking to
*/
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
- unsigned long devaddr);
+extern int s3c2410_dma_devconfig(unsigned int channel,
+ enum s3c2410_dmasrc source, unsigned long devaddr);
/* s3c2410_dma_getposition
*
#ifndef __PLAT_S3C_FB_H
#define __PLAT_S3C_FB_H __FILE__
+/* S3C_FB_MAX_WIN
+ * Set to the maximum number of windows that any of the supported hardware
+ * can use. Since the platform data uses this for an array size, having it
+ * set to the maximum of any version of the hardware can do is safe.
+ */
+#define S3C_FB_MAX_WIN (5)
+
/**
* struct s3c_fb_pd_win - per window setup data
* @win_mode: The display parameters to initialise (not for window 0)
#define __PLAT_GPIO_CFG_H __FILE__
typedef unsigned int __bitwise__ s3c_gpio_pull_t;
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
/* forward declaration if gpio-core.h hasn't been included */
struct s3c_gpio_chip;
*/
extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
+/* Define values for the drvstr available for each gpio pin.
+ *
+ * These values control the value of the output signal driver strength,
+ * configurable on most pins on the S5C series.
+ */
+#define S5P_GPIO_DRVSTR_LV1 ((__force s5p_gpio_drvstr_t)0x00)
+#define S5P_GPIO_DRVSTR_LV2 ((__force s5p_gpio_drvstr_t)0x01)
+#define S5P_GPIO_DRVSTR_LV3 ((__force s5p_gpio_drvstr_t)0x10)
+#define S5P_GPIO_DRVSTR_LV4 ((__force s5p_gpio_drvstr_t)0x11)
+
+/**
+ * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
+ * @pin: The pin number to get the settings for
+ *
+ * Read the driver streght value for the specified pin.
+*/
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
+
+/**
+ * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
+ * @pin: The pin number to configure the driver streght value
+ * @drvstr: The new value of the driver strength
+ *
+ * This function sets the driver strength value for the specified pin.
+ * It will return 0 if successfull, or a negative error code if the pin
+ * cannot support the requested setting.
+*/
+extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
+
#endif /* __PLAT_GPIO_CFG_H */
* @chip: The chip structure to be exported via gpiolib.
* @base: The base pointer to the gpio configuration registers.
* @config: special function and pull-resistor control information.
+ * @lock: Lock for exclusive access to this gpio bank.
* @pm_save: Save information for suspend/resume support.
*
* This wrapper provides the necessary information for the Samsung
* specific gpios being registered with gpiolib.
+ *
+ * The lock protects each gpio bank from multiple access of the shared
+ * configuration registers, or from reading of data whilst another thread
+ * is writing to the register set.
+ *
+ * Each chip has its own lock to avoid any contention between different
+ * CPU cores trying to get one lock for different GPIO banks, where each
+ * bank of GPIO has its own register space and configuration registers.
*/
struct s3c_gpio_chip {
struct gpio_chip chip;
struct s3c_gpio_cfg *config;
struct s3c_gpio_pm *pm;
void __iomem *base;
+ spinlock_t lock;
#ifdef CONFIG_PM
u32 pm_save[4];
#endif
#define __gpio_pm(x) NULL
#endif /* CONFIG_PM */
+
+/* locking wrappers to deal with multiple access to the same gpio bank */
+#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
+#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
struct s3c_hwmon_chcfg *in[8];
};
+/**
+ * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with the S3C HWMON device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd);
+
#endif /* __ASM_ARCH_ADC_HWMON_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __S3C_DMA_PL330_H_
+#define __S3C_DMA_PL330_H_
+
+#define S3C2410_DMAF_AUTOSTART (1 << 0)
+#define S3C2410_DMAF_CIRCULAR (1 << 1)
+
+/*
+ * PL330 can assign any channel to communicate with
+ * any of the peripherals attched to the DMAC.
+ * For the sake of consistency across client drivers,
+ * We keep the channel names unchanged and only add
+ * missing peripherals are added.
+ * Order is not important since S3C PL330 API driver
+ * use these just as IDs.
+ */
+enum dma_ch {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_IRDA,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_EXTERNAL,
+ DMACH_PWM,
+ DMACH_SPDIF,
+ DMACH_HSI_RX,
+ DMACH_HSI_TX,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_PCM1_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM2_TX,
+ DMACH_PCM2_RX,
+ DMACH_MSM_REQ3,
+ DMACH_MSM_REQ2,
+ DMACH_MSM_REQ1,
+ DMACH_MSM_REQ0,
+ /* END Marker, also used to denote a reserved channel */
+ DMACH_MAX,
+};
+
+static inline bool s3c_dma_has_circular(void)
+{
+ return true;
+}
+
+#include <plat/dma.h>
+
+#endif /* __S3C_DMA_PL330_H_ */
--- /dev/null
+/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __S3C_PL330_PDATA_H
+#define __S3C_PL330_PDATA_H
+
+#include <plat/s3c-dma-pl330.h>
+
+/*
+ * Every PL330 DMAC has max 32 peripheral interfaces,
+ * of which some may be not be really used in your
+ * DMAC's configuration.
+ * Populate this array of 32 peri i/fs with relevant
+ * channel IDs for used peri i/f and DMACH_MAX for
+ * those unused.
+ *
+ * The platforms just need to provide this info
+ * to the S3C DMA API driver for PL330.
+ */
+struct s3c_pl330_platdata {
+ enum dma_ch peri[32];
+};
+
+#endif /* __S3C_PL330_PDATA_H */
-/* linux/include/asm/arch-s3c2410/ts.h
+/* arch/arm/plat-samsung/include/plat/ts.h
*
* Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
*
int delay;
int presc;
int oversampling_shift;
+ void (*cfg_gpio)(struct platform_device *dev);
};
extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+/* defined by architecture to configure gpio */
+extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev);
+
#endif /* __ASM_ARM_TS_H */
struct s3c_gpio_chip *ourchip;
unsigned int gpio_nr;
- for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
ourchip = s3c_gpiolib_getchip(gpio_nr);
if (!ourchip)
continue;
struct s3c_gpio_chip *ourchip;
unsigned int gpio_nr;
- for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) {
ourchip = s3c_gpiolib_getchip(gpio_nr);
if (!ourchip)
continue;
--- /dev/null
+/* linux/arch/arm/plat-samsung/s3c-pl330.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/pl330.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+/**
+ * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC.
+ * @busy_chan: Number of channels currently busy.
+ * @peri: List of IDs of peripherals this DMAC can work with.
+ * @node: To attach to the global list of DMACs.
+ * @pi: PL330 configuration info for the DMAC.
+ * @kmcache: Pool to quickly allocate xfers for all channels in the dmac.
+ */
+struct s3c_pl330_dmac {
+ unsigned busy_chan;
+ enum dma_ch *peri;
+ struct list_head node;
+ struct pl330_info *pi;
+ struct kmem_cache *kmcache;
+};
+
+/**
+ * struct s3c_pl330_xfer - A request submitted by S3C DMA clients.
+ * @token: Xfer ID provided by the client.
+ * @node: To attach to the list of xfers on a channel.
+ * @px: Xfer for PL330 core.
+ * @chan: Owner channel of this xfer.
+ */
+struct s3c_pl330_xfer {
+ void *token;
+ struct list_head node;
+ struct pl330_xfer px;
+ struct s3c_pl330_chan *chan;
+};
+
+/**
+ * struct s3c_pl330_chan - Logical channel to communicate with
+ * a Physical peripheral.
+ * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC.
+ * NULL if the channel is available to be acquired.
+ * @id: ID of the peripheral that this channel can communicate with.
+ * @options: Options specified by the client.
+ * @sdaddr: Address provided via s3c2410_dma_devconfig.
+ * @node: To attach to the global list of channels.
+ * @lrq: Pointer to the last submitted pl330_req to PL330 core.
+ * @xfer_list: To manage list of xfers enqueued.
+ * @req: Two requests to communicate with the PL330 engine.
+ * @callback_fn: Callback function to the client.
+ * @rqcfg: Channel configuration for the xfers.
+ * @xfer_head: Pointer to the xfer to be next excecuted.
+ * @dmac: Pointer to the DMAC that manages this channel, NULL if the
+ * channel is available to be acquired.
+ * @client: Client of this channel. NULL if the
+ * channel is available to be acquired.
+ */
+struct s3c_pl330_chan {
+ void *pl330_chan_id;
+ enum dma_ch id;
+ unsigned int options;
+ unsigned long sdaddr;
+ struct list_head node;
+ struct pl330_req *lrq;
+ struct list_head xfer_list;
+ struct pl330_req req[2];
+ s3c2410_dma_cbfn_t callback_fn;
+ struct pl330_reqcfg rqcfg;
+ struct s3c_pl330_xfer *xfer_head;
+ struct s3c_pl330_dmac *dmac;
+ struct s3c2410_dma_client *client;
+};
+
+/* All DMACs in the platform */
+static LIST_HEAD(dmac_list);
+
+/* All channels to peripherals in the platform */
+static LIST_HEAD(chan_list);
+
+/*
+ * Since we add resources(DMACs and Channels) to the global pool,
+ * we need to guard access to the resources using a global lock
+ */
+static DEFINE_SPINLOCK(res_lock);
+
+/* Returns the channel with ID 'id' in the chan_list */
+static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id)
+{
+ struct s3c_pl330_chan *ch;
+
+ list_for_each_entry(ch, &chan_list, node)
+ if (ch->id == id)
+ return ch;
+
+ return NULL;
+}
+
+/* Allocate a new channel with ID 'id' and add to chan_list */
+static void chan_add(const enum dma_ch id)
+{
+ struct s3c_pl330_chan *ch = id_to_chan(id);
+
+ /* Return if the channel already exists */
+ if (ch)
+ return;
+
+ ch = kmalloc(sizeof(*ch), GFP_KERNEL);
+ /* Return silently to work with other channels */
+ if (!ch)
+ return;
+
+ ch->id = id;
+ ch->dmac = NULL;
+
+ list_add_tail(&ch->node, &chan_list);
+}
+
+/* If the channel is not yet acquired by any client */
+static bool chan_free(struct s3c_pl330_chan *ch)
+{
+ if (!ch)
+ return false;
+
+ /* Channel points to some DMAC only when it's acquired */
+ return ch->dmac ? false : true;
+}
+
+/*
+ * Returns 0 is peripheral i/f is invalid or not present on the dmac.
+ * Index + 1, otherwise.
+ */
+static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id)
+{
+ enum dma_ch *id = dmac->peri;
+ int i;
+
+ /* Discount invalid markers */
+ if (ch_id == DMACH_MAX)
+ return 0;
+
+ for (i = 0; i < PL330_MAX_PERI; i++)
+ if (id[i] == ch_id)
+ return i + 1;
+
+ return 0;
+}
+
+/* If all channel threads of the DMAC are busy */
+static inline bool dmac_busy(struct s3c_pl330_dmac *dmac)
+{
+ struct pl330_info *pi = dmac->pi;
+
+ return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true;
+}
+
+/*
+ * Returns the number of free channels that
+ * can be handled by this dmac only.
+ */
+static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac)
+{
+ enum dma_ch *id = dmac->peri;
+ struct s3c_pl330_dmac *d;
+ struct s3c_pl330_chan *ch;
+ unsigned found, count = 0;
+ enum dma_ch p;
+ int i;
+
+ for (i = 0; i < PL330_MAX_PERI; i++) {
+ p = id[i];
+ ch = id_to_chan(p);
+
+ if (p == DMACH_MAX || !chan_free(ch))
+ continue;
+
+ found = 0;
+ list_for_each_entry(d, &dmac_list, node) {
+ if (d != dmac && iface_of_dmac(d, ch->id)) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found)
+ count++;
+ }
+
+ return count;
+}
+
+/*
+ * Measure of suitability of 'dmac' handling 'ch'
+ *
+ * 0 indicates 'dmac' can not handle 'ch' either
+ * because it is not supported by the hardware or
+ * because all dmac channels are currently busy.
+ *
+ * >0 vlaue indicates 'dmac' has the capability.
+ * The bigger the value the more suitable the dmac.
+ */
+#define MAX_SUIT UINT_MAX
+#define MIN_SUIT 0
+
+static unsigned suitablility(struct s3c_pl330_dmac *dmac,
+ struct s3c_pl330_chan *ch)
+{
+ struct pl330_info *pi = dmac->pi;
+ enum dma_ch *id = dmac->peri;
+ struct s3c_pl330_dmac *d;
+ unsigned s;
+ int i;
+
+ s = MIN_SUIT;
+ /* If all the DMAC channel threads are busy */
+ if (dmac_busy(dmac))
+ return s;
+
+ for (i = 0; i < PL330_MAX_PERI; i++)
+ if (id[i] == ch->id)
+ break;
+
+ /* If the 'dmac' can't talk to 'ch' */
+ if (i == PL330_MAX_PERI)
+ return s;
+
+ s = MAX_SUIT;
+ list_for_each_entry(d, &dmac_list, node) {
+ /*
+ * If some other dmac can talk to this
+ * peri and has some channel free.
+ */
+ if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) {
+ s = 0;
+ break;
+ }
+ }
+ if (s)
+ return s;
+
+ s = 100;
+
+ /* Good if free chans are more, bad otherwise */
+ s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac);
+
+ return s;
+}
+
+/* More than one DMAC may have capability to transfer data with the
+ * peripheral. This function assigns most suitable DMAC to manage the
+ * channel and hence communicate with the peripheral.
+ */
+static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch)
+{
+ struct s3c_pl330_dmac *d, *dmac = NULL;
+ unsigned sn, sl = MIN_SUIT;
+
+ list_for_each_entry(d, &dmac_list, node) {
+ sn = suitablility(d, ch);
+
+ if (sn == MAX_SUIT)
+ return d;
+
+ if (sn > sl)
+ dmac = d;
+ }
+
+ return dmac;
+}
+
+/* Acquire the channel for peripheral 'id' */
+static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id)
+{
+ struct s3c_pl330_chan *ch = id_to_chan(id);
+ struct s3c_pl330_dmac *dmac;
+
+ /* If the channel doesn't exist or is already acquired */
+ if (!ch || !chan_free(ch)) {
+ ch = NULL;
+ goto acq_exit;
+ }
+
+ dmac = map_chan_to_dmac(ch);
+ /* If couldn't map */
+ if (!dmac) {
+ ch = NULL;
+ goto acq_exit;
+ }
+
+ dmac->busy_chan++;
+ ch->dmac = dmac;
+
+acq_exit:
+ return ch;
+}
+
+/* Delete xfer from the queue */
+static inline void del_from_queue(struct s3c_pl330_xfer *xfer)
+{
+ struct s3c_pl330_xfer *t;
+ struct s3c_pl330_chan *ch;
+ int found;
+
+ if (!xfer)
+ return;
+
+ ch = xfer->chan;
+
+ /* Make sure xfer is in the queue */
+ found = 0;
+ list_for_each_entry(t, &ch->xfer_list, node)
+ if (t == xfer) {
+ found = 1;
+ break;
+ }
+
+ if (!found)
+ return;
+
+ /* If xfer is last entry in the queue */
+ if (xfer->node.next == &ch->xfer_list)
+ t = list_entry(ch->xfer_list.next,
+ struct s3c_pl330_xfer, node);
+ else
+ t = list_entry(xfer->node.next,
+ struct s3c_pl330_xfer, node);
+
+ /* If there was only one node left */
+ if (t == xfer)
+ ch->xfer_head = NULL;
+ else if (ch->xfer_head == xfer)
+ ch->xfer_head = t;
+
+ list_del(&xfer->node);
+}
+
+/* Provides pointer to the next xfer in the queue.
+ * If CIRCULAR option is set, the list is left intact,
+ * otherwise the xfer is removed from the list.
+ * Forced delete 'pluck' can be set to override the CIRCULAR option.
+ */
+static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch,
+ int pluck)
+{
+ struct s3c_pl330_xfer *xfer = ch->xfer_head;
+
+ if (!xfer)
+ return NULL;
+
+ /* If xfer is last entry in the queue */
+ if (xfer->node.next == &ch->xfer_list)
+ ch->xfer_head = list_entry(ch->xfer_list.next,
+ struct s3c_pl330_xfer, node);
+ else
+ ch->xfer_head = list_entry(xfer->node.next,
+ struct s3c_pl330_xfer, node);
+
+ if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR))
+ del_from_queue(xfer);
+
+ return xfer;
+}
+
+static inline void add_to_queue(struct s3c_pl330_chan *ch,
+ struct s3c_pl330_xfer *xfer, int front)
+{
+ struct pl330_xfer *xt;
+
+ /* If queue empty */
+ if (ch->xfer_head == NULL)
+ ch->xfer_head = xfer;
+
+ xt = &ch->xfer_head->px;
+ /* If the head already submitted (CIRCULAR head) */
+ if (ch->options & S3C2410_DMAF_CIRCULAR &&
+ (xt == ch->req[0].x || xt == ch->req[1].x))
+ ch->xfer_head = xfer;
+
+ /* If this is a resubmission, it should go at the head */
+ if (front) {
+ ch->xfer_head = xfer;
+ list_add(&xfer->node, &ch->xfer_list);
+ } else {
+ list_add_tail(&xfer->node, &ch->xfer_list);
+ }
+}
+
+static inline void _finish_off(struct s3c_pl330_xfer *xfer,
+ enum s3c2410_dma_buffresult res, int ffree)
+{
+ struct s3c_pl330_chan *ch;
+
+ if (!xfer)
+ return;
+
+ ch = xfer->chan;
+
+ /* Do callback */
+ if (ch->callback_fn)
+ ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res);
+
+ /* Force Free or if buffer is not needed anymore */
+ if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR))
+ kmem_cache_free(ch->dmac->kmcache, xfer);
+}
+
+static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch,
+ struct pl330_req *r)
+{
+ struct s3c_pl330_xfer *xfer;
+ int ret = 0;
+
+ /* If already submitted */
+ if (r->x)
+ return 0;
+
+ xfer = get_from_queue(ch, 0);
+ if (xfer) {
+ r->x = &xfer->px;
+
+ /* Use max bandwidth for M<->M xfers */
+ if (r->rqtype == MEMTOMEM) {
+ struct pl330_info *pi = xfer->chan->dmac->pi;
+ int burst = 1 << ch->rqcfg.brst_size;
+ u32 bytes = r->x->bytes;
+ int bl;
+
+ bl = pi->pcfg.data_bus_width / 8;
+ bl *= pi->pcfg.data_buf_dep;
+ bl /= burst;
+
+ /* src/dst_burst_len can't be more than 16 */
+ if (bl > 16)
+ bl = 16;
+
+ while (bl > 1) {
+ if (!(bytes % (bl * burst)))
+ break;
+ bl--;
+ }
+
+ ch->rqcfg.brst_len = bl;
+ } else {
+ ch->rqcfg.brst_len = 1;
+ }
+
+ ret = pl330_submit_req(ch->pl330_chan_id, r);
+
+ /* If submission was successful */
+ if (!ret) {
+ ch->lrq = r; /* latest submitted req */
+ return 0;
+ }
+
+ r->x = NULL;
+
+ /* If both of the PL330 ping-pong buffers filled */
+ if (ret == -EAGAIN) {
+ dev_err(ch->dmac->pi->dev, "%s:%d!\n",
+ __func__, __LINE__);
+ /* Queue back again */
+ add_to_queue(ch, xfer, 1);
+ ret = 0;
+ } else {
+ dev_err(ch->dmac->pi->dev, "%s:%d!\n",
+ __func__, __LINE__);
+ _finish_off(xfer, S3C2410_RES_ERR, 0);
+ }
+ }
+
+ return ret;
+}
+
+static void s3c_pl330_rq(struct s3c_pl330_chan *ch,
+ struct pl330_req *r, enum pl330_op_err err)
+{
+ unsigned long flags;
+ struct s3c_pl330_xfer *xfer;
+ struct pl330_xfer *xl = r->x;
+ enum s3c2410_dma_buffresult res;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ r->x = NULL;
+
+ s3c_pl330_submit(ch, r);
+
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ /* Map result to S3C DMA API */
+ if (err == PL330_ERR_NONE)
+ res = S3C2410_RES_OK;
+ else if (err == PL330_ERR_ABORT)
+ res = S3C2410_RES_ABORT;
+ else
+ res = S3C2410_RES_ERR;
+
+ /* If last request had some xfer */
+ if (xl) {
+ xfer = container_of(xl, struct s3c_pl330_xfer, px);
+ _finish_off(xfer, res, 0);
+ } else {
+ dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n",
+ __func__, __LINE__);
+ }
+}
+
+static void s3c_pl330_rq0(void *token, enum pl330_op_err err)
+{
+ struct pl330_req *r = token;
+ struct s3c_pl330_chan *ch = container_of(r,
+ struct s3c_pl330_chan, req[0]);
+ s3c_pl330_rq(ch, r, err);
+}
+
+static void s3c_pl330_rq1(void *token, enum pl330_op_err err)
+{
+ struct pl330_req *r = token;
+ struct s3c_pl330_chan *ch = container_of(r,
+ struct s3c_pl330_chan, req[1]);
+ s3c_pl330_rq(ch, r, err);
+}
+
+/* Release an acquired channel */
+static void chan_release(struct s3c_pl330_chan *ch)
+{
+ struct s3c_pl330_dmac *dmac;
+
+ if (chan_free(ch))
+ return;
+
+ dmac = ch->dmac;
+ ch->dmac = NULL;
+ dmac->busy_chan--;
+}
+
+int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op)
+{
+ struct s3c_pl330_xfer *xfer;
+ enum pl330_chan_op pl330op;
+ struct s3c_pl330_chan *ch;
+ unsigned long flags;
+ int idx, ret;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ ch = id_to_chan(id);
+
+ if (!ch || chan_free(ch)) {
+ ret = -EINVAL;
+ goto ctrl_exit;
+ }
+
+ switch (op) {
+ case S3C2410_DMAOP_START:
+ /* Make sure both reqs are enqueued */
+ idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+ s3c_pl330_submit(ch, &ch->req[idx]);
+ s3c_pl330_submit(ch, &ch->req[1 - idx]);
+ pl330op = PL330_OP_START;
+ break;
+
+ case S3C2410_DMAOP_STOP:
+ pl330op = PL330_OP_ABORT;
+ break;
+
+ case S3C2410_DMAOP_FLUSH:
+ pl330op = PL330_OP_FLUSH;
+ break;
+
+ case S3C2410_DMAOP_PAUSE:
+ case S3C2410_DMAOP_RESUME:
+ case S3C2410_DMAOP_TIMEOUT:
+ case S3C2410_DMAOP_STARTED:
+ spin_unlock_irqrestore(&res_lock, flags);
+ return 0;
+
+ default:
+ spin_unlock_irqrestore(&res_lock, flags);
+ return -EINVAL;
+ }
+
+ ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op);
+
+ if (pl330op == PL330_OP_START) {
+ spin_unlock_irqrestore(&res_lock, flags);
+ return ret;
+ }
+
+ idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+ /* Abort the current xfer */
+ if (ch->req[idx].x) {
+ xfer = container_of(ch->req[idx].x,
+ struct s3c_pl330_xfer, px);
+
+ /* Drop xfer during FLUSH */
+ if (pl330op == PL330_OP_FLUSH)
+ del_from_queue(xfer);
+
+ ch->req[idx].x = NULL;
+
+ spin_unlock_irqrestore(&res_lock, flags);
+ _finish_off(xfer, S3C2410_RES_ABORT,
+ pl330op == PL330_OP_FLUSH ? 1 : 0);
+ spin_lock_irqsave(&res_lock, flags);
+ }
+
+ /* Flush the whole queue */
+ if (pl330op == PL330_OP_FLUSH) {
+
+ if (ch->req[1 - idx].x) {
+ xfer = container_of(ch->req[1 - idx].x,
+ struct s3c_pl330_xfer, px);
+
+ del_from_queue(xfer);
+
+ ch->req[1 - idx].x = NULL;
+
+ spin_unlock_irqrestore(&res_lock, flags);
+ _finish_off(xfer, S3C2410_RES_ABORT, 1);
+ spin_lock_irqsave(&res_lock, flags);
+ }
+
+ /* Finish off the remaining in the queue */
+ xfer = ch->xfer_head;
+ while (xfer) {
+
+ del_from_queue(xfer);
+
+ spin_unlock_irqrestore(&res_lock, flags);
+ _finish_off(xfer, S3C2410_RES_ABORT, 1);
+ spin_lock_irqsave(&res_lock, flags);
+
+ xfer = ch->xfer_head;
+ }
+ }
+
+ctrl_exit:
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+int s3c2410_dma_enqueue(enum dma_ch id, void *token,
+ dma_addr_t addr, int size)
+{
+ struct s3c_pl330_chan *ch;
+ struct s3c_pl330_xfer *xfer;
+ unsigned long flags;
+ int idx, ret = 0;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ ch = id_to_chan(id);
+
+ /* Error if invalid or free channel */
+ if (!ch || chan_free(ch)) {
+ ret = -EINVAL;
+ goto enq_exit;
+ }
+
+ /* Error if size is unaligned */
+ if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) {
+ ret = -EINVAL;
+ goto enq_exit;
+ }
+
+ xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC);
+ if (!xfer) {
+ ret = -ENOMEM;
+ goto enq_exit;
+ }
+
+ xfer->token = token;
+ xfer->chan = ch;
+ xfer->px.bytes = size;
+ xfer->px.next = NULL; /* Single request */
+
+ /* For S3C DMA API, direction is always fixed for all xfers */
+ if (ch->req[0].rqtype == MEMTODEV) {
+ xfer->px.src_addr = addr;
+ xfer->px.dst_addr = ch->sdaddr;
+ } else {
+ xfer->px.src_addr = ch->sdaddr;
+ xfer->px.dst_addr = addr;
+ }
+
+ add_to_queue(ch, xfer, 0);
+
+ /* Try submitting on either request */
+ idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+ if (!ch->req[idx].x)
+ s3c_pl330_submit(ch, &ch->req[idx]);
+ else
+ s3c_pl330_submit(ch, &ch->req[1 - idx]);
+
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ if (ch->options & S3C2410_DMAF_AUTOSTART)
+ s3c2410_dma_ctrl(id, S3C2410_DMAOP_START);
+
+ return 0;
+
+enq_exit:
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+int s3c2410_dma_request(enum dma_ch id,
+ struct s3c2410_dma_client *client,
+ void *dev)
+{
+ struct s3c_pl330_dmac *dmac;
+ struct s3c_pl330_chan *ch;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ ch = chan_acquire(id);
+ if (!ch) {
+ ret = -EBUSY;
+ goto req_exit;
+ }
+
+ dmac = ch->dmac;
+
+ ch->pl330_chan_id = pl330_request_channel(dmac->pi);
+ if (!ch->pl330_chan_id) {
+ chan_release(ch);
+ ret = -EBUSY;
+ goto req_exit;
+ }
+
+ ch->client = client;
+ ch->options = 0; /* Clear any option */
+ ch->callback_fn = NULL; /* Clear any callback */
+ ch->lrq = NULL;
+
+ ch->rqcfg.brst_size = 2; /* Default word size */
+ ch->rqcfg.swap = SWAP_NO;
+ ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */
+ ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */
+ ch->rqcfg.privileged = 0;
+ ch->rqcfg.insnaccess = 0;
+
+ /* Set invalid direction */
+ ch->req[0].rqtype = DEVTODEV;
+ ch->req[1].rqtype = ch->req[0].rqtype;
+
+ ch->req[0].cfg = &ch->rqcfg;
+ ch->req[1].cfg = ch->req[0].cfg;
+
+ ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */
+ ch->req[1].peri = ch->req[0].peri;
+
+ ch->req[0].token = &ch->req[0];
+ ch->req[0].xfer_cb = s3c_pl330_rq0;
+ ch->req[1].token = &ch->req[1];
+ ch->req[1].xfer_cb = s3c_pl330_rq1;
+
+ ch->req[0].x = NULL;
+ ch->req[1].x = NULL;
+
+ /* Reset xfer list */
+ INIT_LIST_HEAD(&ch->xfer_list);
+ ch->xfer_head = NULL;
+
+req_exit:
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client)
+{
+ struct s3c_pl330_chan *ch;
+ struct s3c_pl330_xfer *xfer;
+ unsigned long flags;
+ int ret = 0;
+ unsigned idx;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ ch = id_to_chan(id);
+
+ if (!ch || chan_free(ch))
+ goto free_exit;
+
+ /* Refuse if someone else wanted to free the channel */
+ if (ch->client != client) {
+ ret = -EBUSY;
+ goto free_exit;
+ }
+
+ /* Stop any active xfer, Flushe the queue and do callbacks */
+ pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH);
+
+ /* Abort the submitted requests */
+ idx = (ch->lrq == &ch->req[0]) ? 1 : 0;
+
+ if (ch->req[idx].x) {
+ xfer = container_of(ch->req[idx].x,
+ struct s3c_pl330_xfer, px);
+
+ ch->req[idx].x = NULL;
+ del_from_queue(xfer);
+
+ spin_unlock_irqrestore(&res_lock, flags);
+ _finish_off(xfer, S3C2410_RES_ABORT, 1);
+ spin_lock_irqsave(&res_lock, flags);
+ }
+
+ if (ch->req[1 - idx].x) {
+ xfer = container_of(ch->req[1 - idx].x,
+ struct s3c_pl330_xfer, px);
+
+ ch->req[1 - idx].x = NULL;
+ del_from_queue(xfer);
+
+ spin_unlock_irqrestore(&res_lock, flags);
+ _finish_off(xfer, S3C2410_RES_ABORT, 1);
+ spin_lock_irqsave(&res_lock, flags);
+ }
+
+ /* Pluck and Abort the queued requests in order */
+ do {
+ xfer = get_from_queue(ch, 1);
+
+ spin_unlock_irqrestore(&res_lock, flags);
+ _finish_off(xfer, S3C2410_RES_ABORT, 1);
+ spin_lock_irqsave(&res_lock, flags);
+ } while (xfer);
+
+ ch->client = NULL;
+
+ pl330_release_channel(ch->pl330_chan_id);
+
+ ch->pl330_chan_id = NULL;
+
+ chan_release(ch);
+
+free_exit:
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+int s3c2410_dma_config(enum dma_ch id, int xferunit)
+{
+ struct s3c_pl330_chan *ch;
+ struct pl330_info *pi;
+ unsigned long flags;
+ int i, dbwidth, ret = 0;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ ch = id_to_chan(id);
+
+ if (!ch || chan_free(ch)) {
+ ret = -EINVAL;
+ goto cfg_exit;
+ }
+
+ pi = ch->dmac->pi;
+ dbwidth = pi->pcfg.data_bus_width / 8;
+
+ /* Max size of xfer can be pcfg.data_bus_width */
+ if (xferunit > dbwidth) {
+ ret = -EINVAL;
+ goto cfg_exit;
+ }
+
+ i = 0;
+ while (xferunit != (1 << i))
+ i++;
+
+ /* If valid value */
+ if (xferunit == (1 << i))
+ ch->rqcfg.brst_size = i;
+ else
+ ret = -EINVAL;
+
+cfg_exit:
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+/* Options that are supported by this driver */
+#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART)
+
+int s3c2410_dma_setflags(enum dma_ch id, unsigned int options)
+{
+ struct s3c_pl330_chan *ch;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ ch = id_to_chan(id);
+
+ if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS))
+ ret = -EINVAL;
+ else
+ ch->options = options;
+
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
+
+int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn)
+{
+ struct s3c_pl330_chan *ch;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ ch = id_to_chan(id);
+
+ if (!ch || chan_free(ch))
+ ret = -EINVAL;
+ else
+ ch->callback_fn = rtn;
+
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source,
+ unsigned long address)
+{
+ struct s3c_pl330_chan *ch;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ ch = id_to_chan(id);
+
+ if (!ch || chan_free(ch)) {
+ ret = -EINVAL;
+ goto devcfg_exit;
+ }
+
+ switch (source) {
+ case S3C2410_DMASRC_HW: /* P->M */
+ ch->req[0].rqtype = DEVTOMEM;
+ ch->req[1].rqtype = DEVTOMEM;
+ ch->rqcfg.src_inc = 0;
+ ch->rqcfg.dst_inc = 1;
+ break;
+ case S3C2410_DMASRC_MEM: /* M->P */
+ ch->req[0].rqtype = MEMTODEV;
+ ch->req[1].rqtype = MEMTODEV;
+ ch->rqcfg.src_inc = 1;
+ ch->rqcfg.dst_inc = 0;
+ break;
+ default:
+ ret = -EINVAL;
+ goto devcfg_exit;
+ }
+
+ ch->sdaddr = address;
+
+devcfg_exit:
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst)
+{
+ struct s3c_pl330_chan *ch = id_to_chan(id);
+ struct pl330_chanstatus status;
+ int ret;
+
+ if (!ch || chan_free(ch))
+ return -EINVAL;
+
+ ret = pl330_chan_status(ch->pl330_chan_id, &status);
+ if (ret < 0)
+ return ret;
+
+ *src = status.src_addr;
+ *dst = status.dst_addr;
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+static irqreturn_t pl330_irq_handler(int irq, void *data)
+{
+ if (pl330_update(data))
+ return IRQ_HANDLED;
+ else
+ return IRQ_NONE;
+}
+
+static int pl330_probe(struct platform_device *pdev)
+{
+ struct s3c_pl330_dmac *s3c_pl330_dmac;
+ struct s3c_pl330_platdata *pl330pd;
+ struct pl330_info *pl330_info;
+ struct resource *res;
+ int i, ret, irq;
+
+ pl330pd = pdev->dev.platform_data;
+
+ /* Can't do without the list of _32_ peripherals */
+ if (!pl330pd || !pl330pd->peri) {
+ dev_err(&pdev->dev, "platform data missing!\n");
+ return -ENODEV;
+ }
+
+ pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL);
+ if (!pl330_info)
+ return -ENOMEM;
+
+ pl330_info->pl330_data = NULL;
+ pl330_info->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto probe_err1;
+ }
+
+ request_mem_region(res->start, resource_size(res), pdev->name);
+
+ pl330_info->base = ioremap(res->start, resource_size(res));
+ if (!pl330_info->base) {
+ ret = -ENXIO;
+ goto probe_err2;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ ret = irq;
+ goto probe_err3;
+ }
+
+ ret = request_irq(irq, pl330_irq_handler, 0,
+ dev_name(&pdev->dev), pl330_info);
+ if (ret)
+ goto probe_err4;
+
+ ret = pl330_add(pl330_info);
+ if (ret)
+ goto probe_err5;
+
+ /* Allocate a new DMAC */
+ s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL);
+ if (!s3c_pl330_dmac) {
+ ret = -ENOMEM;
+ goto probe_err6;
+ }
+
+ /* Hook the info */
+ s3c_pl330_dmac->pi = pl330_info;
+
+ /* No busy channels */
+ s3c_pl330_dmac->busy_chan = 0;
+
+ s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev),
+ sizeof(struct s3c_pl330_xfer), 0, 0, NULL);
+
+ if (!s3c_pl330_dmac->kmcache) {
+ ret = -ENOMEM;
+ goto probe_err7;
+ }
+
+ /* Get the list of peripherals */
+ s3c_pl330_dmac->peri = pl330pd->peri;
+
+ /* Attach to the list of DMACs */
+ list_add_tail(&s3c_pl330_dmac->node, &dmac_list);
+
+ /* Create a channel for each peripheral in the DMAC
+ * that is, if it doesn't already exist
+ */
+ for (i = 0; i < PL330_MAX_PERI; i++)
+ if (s3c_pl330_dmac->peri[i] != DMACH_MAX)
+ chan_add(s3c_pl330_dmac->peri[i]);
+
+ printk(KERN_INFO
+ "Loaded driver for PL330 DMAC-%d %s\n", pdev->id, pdev->name);
+ printk(KERN_INFO
+ "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
+ pl330_info->pcfg.data_buf_dep,
+ pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan,
+ pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events);
+
+ return 0;
+
+probe_err7:
+ kfree(s3c_pl330_dmac);
+probe_err6:
+ pl330_del(pl330_info);
+probe_err5:
+ free_irq(irq, pl330_info);
+probe_err4:
+probe_err3:
+ iounmap(pl330_info->base);
+probe_err2:
+ release_mem_region(res->start, resource_size(res));
+probe_err1:
+ kfree(pl330_info);
+
+ return ret;
+}
+
+static int pl330_remove(struct platform_device *pdev)
+{
+ struct s3c_pl330_dmac *dmac, *d;
+ struct s3c_pl330_chan *ch;
+ unsigned long flags;
+ int del, found;
+
+ if (!pdev->dev.platform_data)
+ return -EINVAL;
+
+ spin_lock_irqsave(&res_lock, flags);
+
+ found = 0;
+ list_for_each_entry(d, &dmac_list, node)
+ if (d->pi->dev == &pdev->dev) {
+ found = 1;
+ break;
+ }
+
+ if (!found) {
+ spin_unlock_irqrestore(&res_lock, flags);
+ return 0;
+ }
+
+ dmac = d;
+
+ /* Remove all Channels that are managed only by this DMAC */
+ list_for_each_entry(ch, &chan_list, node) {
+
+ /* Only channels that are handled by this DMAC */
+ if (iface_of_dmac(dmac, ch->id))
+ del = 1;
+ else
+ continue;
+
+ /* Don't remove if some other DMAC has it too */
+ list_for_each_entry(d, &dmac_list, node)
+ if (d != dmac && iface_of_dmac(d, ch->id)) {
+ del = 0;
+ break;
+ }
+
+ if (del) {
+ spin_unlock_irqrestore(&res_lock, flags);
+ s3c2410_dma_free(ch->id, ch->client);
+ spin_lock_irqsave(&res_lock, flags);
+ list_del(&ch->node);
+ kfree(ch);
+ }
+ }
+
+ /* Remove the DMAC */
+ list_del(&dmac->node);
+ kfree(dmac);
+
+ spin_unlock_irqrestore(&res_lock, flags);
+
+ return 0;
+}
+
+static struct platform_driver pl330_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "s3c-pl330",
+ },
+ .probe = pl330_probe,
+ .remove = pl330_remove,
+};
+
+static int __init pl330_init(void)
+{
+ return platform_driver_register(&pl330_driver);
+}
+module_init(pl330_init);
+
+static void __exit pl330_exit(void)
+{
+ platform_driver_unregister(&pl330_driver);
+ return;
+}
+module_exit(pl330_exit);
+
+MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
+MODULE_DESCRIPTION("Driver for PL330 DMA Controller");
+MODULE_LICENSE("GPL");
module will be called fujitsu-ts.
config TOUCHSCREEN_S3C2410
- tristate "Samsung S3C2410 touchscreen input driver"
- depends on ARCH_S3C2410
+ tristate "Samsung S3C2410/generic touchscreen input driver"
+ depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
select S3C24XX_ADC
help
Say Y here if you have the s3c2410 touchscreen.
#include <plat/adc.h>
#include <plat/regs-adc.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/ts.h>
+#include <plat/ts.h>
#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
S3C2410_ADCTSC_AUTO_PST | \
S3C2410_ADCTSC_XY_PST(0))
+#define FEAT_PEN_IRQ (1 << 0) /* HAS ADCCLRINTPNDNUP */
+
/* Per-touchscreen data. */
/**
* @irq_tc: The interrupt number for pen up/down interrupt
* @count: The number of samples collected.
* @shift: The log2 of the maximum count to read in one go.
+ * @features: The features supported by the TSADC MOdule.
*/
struct s3c2410ts {
struct s3c_adc_client *client;
int irq_tc;
int count;
int shift;
+ int features;
};
static struct s3c2410ts ts;
-/**
- * s3c2410_ts_connect - configure gpio for s3c2410 systems
- *
- * Configure the GPIO for the S3C2410 system, where we have external FETs
- * connected to the device (later systems such as the S3C2440 integrate
- * these into the device).
-*/
-static inline void s3c2410_ts_connect(void)
-{
- s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
-}
-
/**
* get_down - return the down state of the pen
* @data0: The data read from ADCDAT0 register.
else
dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count);
+ if (ts.features & FEAT_PEN_IRQ) {
+ /* Clear pen down/up interrupt */
+ writel(0x0, ts.io + S3C64XX_ADCCLRINTPNDNUP);
+ }
+
return IRQ_HANDLED;
}
goto err_clk;
}
- /* Configure the touchscreen external FETs on the S3C2410 */
- if (!platform_get_device_id(pdev)->driver_data)
- s3c2410_ts_connect();
+ /* inititalise the gpio */
+ if (info->cfg_gpio)
+ info->cfg_gpio(to_platform_device(ts.dev));
ts.client = s3c_adc_register(pdev, s3c24xx_ts_select,
s3c24xx_ts_conversion, 1);
ts.input->id.version = 0x0102;
ts.shift = info->oversampling_shift;
+ ts.features = platform_get_device_id(pdev)->driver_data;
ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED,
"s3c2410_ts_pen", ts.input);
#endif
static struct platform_device_id s3cts_driver_ids[] = {
- { "s3c2410-ts", 0 },
- { "s3c2440-ts", 1 },
+ { "s3c64xx-ts", FEAT_PEN_IRQ },
{ }
};
MODULE_DEVICE_TABLE(platform, s3cts_driver_ids);
static struct platform_driver s3c_ts_driver = {
.driver = {
- .name = "s3c24xx-ts",
+ .name = "samsung-ts",
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &s3c_ts_pmops,
Serial port support for the Samsung S3C24A0 SoC
config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+ tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port support"
+ depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5PC100)
select SERIAL_SAMSUNG_UARTS_4
default y
help
- Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
- SoCs
-
-config SERIAL_S5PC100
- tristate "Samsung S5PC100 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S5PC100
- select SERIAL_SAMSUNG_UARTS_4
- default y
- help
- Serial port support for the Samsung S5PC100 SoCs
+ Serial port support for the Samsung S3C6400, S3C6410, S5P6440
+ and S5PC100 SoCs
config SERIAL_S5PV210
tristate "Samsung S5PV210 Serial port support"
obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
-obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
projects / karo-tx-linux.git / commitdiff