]> git.kernelconcepts.de Git - karo-tx-linux.git/commitdiff
usb/xhci: hide MSI code behind PCI bars
authorSebastian Andrzej Siewior <bigeasy@linutronix.de>
Fri, 23 Sep 2011 21:19:58 +0000 (14:19 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Mon, 26 Sep 2011 22:51:12 +0000 (15:51 -0700)
The MSI related fuctionality requires a few structs which are not
available if CONFIG_PCI is not enabled. This is a prepartion to allow
xhci be built without CONFIG_PCI set.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/xhci.c

index 583a3e33010599eeddfc3baf2076eb44e07fc228..a8c3e8a34d262f15feac2adb3147ed454119b578 100644 (file)
@@ -175,28 +175,19 @@ int xhci_reset(struct xhci_hcd *xhci)
        return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000);
 }
 
-/*
- * Free IRQs
- * free all IRQs request
- */
-static void xhci_free_irq(struct xhci_hcd *xhci)
+#ifdef CONFIG_PCI
+static int xhci_free_msi(struct xhci_hcd *xhci)
 {
        int i;
-       struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
-
-       /* return if using legacy interrupt */
-       if (xhci_to_hcd(xhci)->irq >= 0)
-               return;
 
-       if (xhci->msix_entries) {
-               for (i = 0; i < xhci->msix_count; i++)
-                       if (xhci->msix_entries[i].vector)
-                               free_irq(xhci->msix_entries[i].vector,
-                                               xhci_to_hcd(xhci));
-       } else if (pdev->irq >= 0)
-               free_irq(pdev->irq, xhci_to_hcd(xhci));
+       if (!xhci->msix_entries)
+               return -EINVAL;
 
-       return;
+       for (i = 0; i < xhci->msix_count; i++)
+               if (xhci->msix_entries[i].vector)
+                       free_irq(xhci->msix_entries[i].vector,
+                                       xhci_to_hcd(xhci));
+       return 0;
 }
 
 /*
@@ -223,6 +214,28 @@ static int xhci_setup_msi(struct xhci_hcd *xhci)
        return ret;
 }
 
+/*
+ * Free IRQs
+ * free all IRQs request
+ */
+static void xhci_free_irq(struct xhci_hcd *xhci)
+{
+       struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+       int ret;
+
+       /* return if using legacy interrupt */
+       if (xhci_to_hcd(xhci)->irq >= 0)
+               return;
+
+       ret = xhci_free_msi(xhci);
+       if (!ret)
+               return;
+       if (pdev->irq >= 0)
+               free_irq(pdev->irq, xhci_to_hcd(xhci));
+
+       return;
+}
+
 /*
  * Set up MSI-X
  */
@@ -302,6 +315,72 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
        return;
 }
 
+static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+       int i;
+
+       if (xhci->msix_entries) {
+               for (i = 0; i < xhci->msix_count; i++)
+                       synchronize_irq(xhci->msix_entries[i].vector);
+       }
+}
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+       struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+       struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+       int ret;
+
+       /*
+        * Some Fresco Logic host controllers advertise MSI, but fail to
+        * generate interrupts.  Don't even try to enable MSI.
+        */
+       if (xhci->quirks & XHCI_BROKEN_MSI)
+               return 0;
+
+       /* unregister the legacy interrupt */
+       if (hcd->irq)
+               free_irq(hcd->irq, hcd);
+       hcd->irq = -1;
+
+       ret = xhci_setup_msix(xhci);
+       if (ret)
+               /* fall back to msi*/
+               ret = xhci_setup_msi(xhci);
+
+       if (!ret)
+               /* hcd->irq is -1, we have MSI */
+               return 0;
+
+       /* fall back to legacy interrupt*/
+       ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
+                       hcd->irq_descr, hcd);
+       if (ret) {
+               xhci_err(xhci, "request interrupt %d failed\n",
+                               pdev->irq);
+               return ret;
+       }
+       hcd->irq = pdev->irq;
+       return 0;
+}
+
+#else
+
+static int xhci_try_enable_msi(struct usb_hcd *hcd)
+{
+       return 0;
+}
+
+static void xhci_cleanup_msix(struct xhci_hcd *xhci)
+{
+}
+
+static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+{
+}
+
+#endif
+
 /*
  * Initialize memory for HCD and xHC (one-time init).
  *
@@ -397,45 +476,6 @@ static int xhci_run_finished(struct xhci_hcd *xhci)
        return 0;
 }
 
-static int xhci_try_enable_msi(struct usb_hcd *hcd)
-{
-       struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-       struct pci_dev  *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
-       int ret;
-
-       /*
-        * Some Fresco Logic host controllers advertise MSI, but fail to
-        * generate interrupts.  Don't even try to enable MSI.
-        */
-       if (xhci->quirks & XHCI_BROKEN_MSI)
-               return 0;
-
-       /* unregister the legacy interrupt */
-       if (hcd->irq)
-               free_irq(hcd->irq, hcd);
-       hcd->irq = -1;
-
-       ret = xhci_setup_msix(xhci);
-       if (ret)
-               /* fall back to msi*/
-               ret = xhci_setup_msi(xhci);
-
-       if (!ret)
-               /* hcd->irq is -1, we have MSI */
-               return 0;
-
-       /* fall back to legacy interrupt*/
-       ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
-                       hcd->irq_descr, hcd);
-       if (ret) {
-               xhci_err(xhci, "request interrupt %d failed\n",
-                               pdev->irq);
-               return ret;
-       }
-       hcd->irq = pdev->irq;
-       return 0;
-}
-
 /*
  * Start the HC after it was halted.
  *
@@ -708,7 +748,6 @@ int xhci_suspend(struct xhci_hcd *xhci)
        int                     rc = 0;
        struct usb_hcd          *hcd = xhci_to_hcd(xhci);
        u32                     command;
-       int                     i;
 
        spin_lock_irq(&xhci->lock);
        clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -744,10 +783,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 
        /* step 5: remove core well power */
        /* synchronize irq when using MSI-X */
-       if (xhci->msix_entries) {
-               for (i = 0; i < xhci->msix_count; i++)
-                       synchronize_irq(xhci->msix_entries[i].vector);
-       }
+       xhci_msix_sync_irqs(xhci);
 
        return rc;
 }