--- /dev/null
+* SPEAr Thermal
+
+Required properties:
+- compatible : "st,thermal-spear1340"
+- reg : Address range of the thermal registers
+- st,thermal-flags: flags used to enable thermal sensor
+
+Example:
+
+ thermal@fc000000 {
+ compatible = "st,thermal-spear1340";
+ reg = <0xfc000000 0x1000>;
+ st,thermal-flags = <0x7000>;
+ };
1.1 thermal zone device interface
1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
- int trips, void *devdata, struct thermal_zone_device_ops *ops)
+ int trips, int mask, void *devdata,
+ struct thermal_zone_device_ops *ops)
This interface function adds a new thermal zone device (sensor) to
/sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
name: the thermal zone name.
trips: the total number of trip points this thermal zone supports.
+ mask: Bit string: If 'n'th bit is set, then trip point 'n' is writeable.
devdata: device private data
ops: thermal zone device call-backs.
.bind: bind the thermal zone device with a thermal cooling device.
.unbind: unbind the thermal zone device with a thermal cooling device.
.get_temp: get the current temperature of the thermal zone.
- .get_mode: get the current mode (user/kernel) of the thermal zone.
- - "kernel" means thermal management is done in kernel.
- - "user" will prevent kernel thermal driver actions upon trip points
+ .get_mode: get the current mode (enabled/disabled) of the thermal zone.
+ - "enabled" means the kernel thermal management is enabled.
+ - "disabled" will prevent kernel thermal driver action upon trip points
so that user applications can take charge of thermal management.
- .set_mode: set the mode (user/kernel) of the thermal zone.
+ .set_mode: set the mode (enabled/disabled) of the thermal zone.
.get_trip_type: get the type of certain trip point.
.get_trip_temp: get the temperature above which the certain trip point
will be fired.
|---mode: Working mode of the thermal zone
|---trip_point_[0-*]_temp: Trip point temperature
|---trip_point_[0-*]_type: Trip point type
+ |---trip_point_[0-*]_hyst: Hysteresis value for this trip point
Thermal cooling device sys I/F, created once it's registered:
/sys/class/thermal/cooling_device[0-*]:
RO, Required
mode
- One of the predefined values in [kernel, user].
+ One of the predefined values in [enabled, disabled].
This file gives information about the algorithm that is currently
managing the thermal zone. It can be either default kernel based
algorithm or user space application.
- kernel = Thermal management in kernel thermal zone driver.
- user = Preventing kernel thermal zone driver actions upon
- trip points so that user application can take full
- charge of the thermal management.
+ enabled = enable Kernel Thermal management.
+ disabled = Preventing kernel thermal zone driver actions upon
+ trip points so that user application can take full
+ charge of the thermal management.
RW, Optional
trip_point_[0-*]_temp
thermal zone.
RO, Optional
+trip_point_[0-*]_hyst
+ The hysteresis value for a trip point, represented as an integer
+ Unit: Celsius
+ RW, Optional
+
cdev[0-*]
Sysfs link to the thermal cooling device node where the sys I/F
for cooling device throttling control represents.
|thermal_zone1:
|---type: acpitz
|---temp: 37000
- |---mode: kernel
+ |---mode: enabled
|---trip_point_0_temp: 100000
|---trip_point_0_type: critical
|---trip_point_1_temp: 80000
S: Supported
F: drivers/acpi/fan.c
-ACPI PROCESSOR AGGREGATOR DRIVER
-M: Shaohua Li <shaohua.li@intel.com>
-L: linux-acpi@vger.kernel.org
-W: http://www.lesswatts.org/projects/acpi/
-S: Supported
-F: drivers/acpi/acpi_pad.c
-
ACPI THERMAL DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-acpi@vger.kernel.org
ac->charger.properties = ac_props;
ac->charger.num_properties = ARRAY_SIZE(ac_props);
ac->charger.get_property = get_ac_property;
- power_supply_register(&ac->device->dev, &ac->charger);
+ result = power_supply_register(&ac->device->dev, &ac->charger);
+ if (result)
+ goto end;
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
{
struct acpi_memory_device *mem_device;
struct acpi_device *device;
-
+ u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
"\nReceived DEVICE CHECK notification for device\n"));
if (acpi_memory_get_device(handle, &mem_device)) {
printk(KERN_ERR PREFIX "Cannot find driver data\n");
- return;
+ break;
}
- if (!acpi_memory_check_device(mem_device)) {
- if (acpi_memory_enable_device(mem_device))
- printk(KERN_ERR PREFIX
- "Cannot enable memory device\n");
+ if (acpi_memory_check_device(mem_device))
+ break;
+
+ if (acpi_memory_enable_device(mem_device)) {
+ printk(KERN_ERR PREFIX "Cannot enable memory device\n");
+ break;
}
+
+ ost_code = ACPI_OST_SC_SUCCESS;
break;
+
case ACPI_NOTIFY_EJECT_REQUEST:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"\nReceived EJECT REQUEST notification for device\n"));
* TBD: Can also be disabled by Callback registration
* with generic sysfs driver
*/
- if (acpi_memory_disable_device(mem_device))
- printk(KERN_ERR PREFIX
- "Disable memory device\n");
+ if (acpi_memory_disable_device(mem_device)) {
+ printk(KERN_ERR PREFIX "Disable memory device\n");
+ /*
+ * If _EJ0 was called but failed, _OST is not
+ * necessary.
+ */
+ if (mem_device->state == MEMORY_INVALID_STATE)
+ return;
+
+ break;
+ }
+
/*
* TBD: Invoke acpi_bus_remove to cleanup data structures
*/
- break;
+
+ /* _EJ0 succeeded; _OST is not necessary */
+ return;
+
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
- break;
+
+ /* non-hotplug event; possibly handled by other handler */
+ return;
}
+ /* Inform firmware that the hotplug operation has completed */
+ (void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL);
return;
}
}
static unsigned int idle_pct = 5; /* percentage */
-static unsigned int round_robin_time = 10; /* second */
+static unsigned int round_robin_time = 1; /* second */
static int power_saving_thread(void *data)
{
struct sched_param param = {.sched_priority = 1};
ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
(void *)(unsigned long)ps_tsk_num,
- "power_saving/%d", ps_tsk_num);
+ "acpi_pad/%d", ps_tsk_num);
rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0;
if (!rc)
ps_tsk_num++;
tbinstal.o \
tbutils.o \
tbxface.o \
+ tbxfload.o \
tbxfroot.o
acpi-y += \
utaddress.o \
utalloc.o \
utcopy.o \
+ utexcep.o \
utdebug.o \
utdecode.o \
utdelete.o \
acpi_status acpi_ev_remove_sci_handler(void);
-u32 acpi_ev_initialize_sCI(u32 program_sCI);
+u32 acpi_ev_initialize_SCI(u32 program_SCI);
ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_ev_terminate(void))
#endif /* __ACEVENTS_H__ */
/* Global handlers */
-ACPI_EXTERN struct acpi_object_notify_handler acpi_gbl_device_notify;
-ACPI_EXTERN struct acpi_object_notify_handler acpi_gbl_system_notify;
+ACPI_EXTERN struct acpi_global_notify_handler acpi_gbl_global_notify[2];
ACPI_EXTERN acpi_exception_handler acpi_gbl_exception_handler;
ACPI_EXTERN acpi_init_handler acpi_gbl_init_handler;
ACPI_EXTERN acpi_tbl_handler acpi_gbl_table_handler;
#endif
-/* Exception codes */
-
-extern char const *acpi_gbl_exception_names_env[];
-extern char const *acpi_gbl_exception_names_pgm[];
-extern char const *acpi_gbl_exception_names_tbl[];
-extern char const *acpi_gbl_exception_names_aml[];
-extern char const *acpi_gbl_exception_names_ctrl[];
-
/*****************************************************************************
*
* Namespace globals
#endif /* ACPI_DEBUGGER */
+/*****************************************************************************
+ *
+ * Info/help support
+ *
+ ****************************************************************************/
+
+extern const struct ah_predefined_name asl_predefined_info[];
+
#endif /* __ACGLOBAL_H__ */
* Information structure for ACPI predefined names.
* Each entry in the table contains the following items:
*
- * Name - The ACPI reserved name
+ * name - The ACPI reserved name
* param_count - Number of arguments to the method
* expected_return_btypes - Allowed type(s) for the return value
*/
u8 originally_enabled; /* True if GPE was originally enabled */
};
+/* Notify info for implicit notify, multiple device objects */
+
+struct acpi_gpe_notify_info {
+ struct acpi_namespace_node *device_node; /* Device to be notified */
+ struct acpi_gpe_notify_info *next;
+};
+
struct acpi_gpe_notify_object {
struct acpi_namespace_node *node;
struct acpi_gpe_notify_object *next;
union acpi_gpe_dispatch_info {
struct acpi_namespace_node *method_node; /* Method node for this GPE level */
struct acpi_gpe_handler_info *handler; /* Installed GPE handler */
- struct acpi_gpe_notify_object device; /* List of _PRW devices for implicit notify */
+ struct acpi_gpe_notify_info *notify_list; /* List of _PRW devices for implicit notifies */
};
/*
* NOTE: Important to keep this struct as small as possible.
*/
struct acpi_gpe_event_info {
- union acpi_gpe_dispatch_info dispatch; /* Either Method or Handler */
+ union acpi_gpe_dispatch_info dispatch; /* Either Method, Handler, or notify_list */
struct acpi_gpe_register_info *register_info; /* Backpointer to register info */
u8 flags; /* Misc info about this GPE */
u8 gpe_number; /* This GPE */
typedef acpi_status(*acpi_parse_upwards) (struct acpi_walk_state * walk_state);
+/* Global handlers for AML Notifies */
+
+struct acpi_global_notify_handler {
+ acpi_notify_handler handler;
+ void *context;
+};
+
/*
* Notify info - used to pass info to the deferred notify
* handler/dispatcher.
*/
struct acpi_notify_info {
- ACPI_STATE_COMMON struct acpi_namespace_node *node;
- union acpi_operand_object *handler_obj;
+ ACPI_STATE_COMMON u8 handler_list_id;
+ struct acpi_namespace_node *node;
+ union acpi_operand_object *handler_list_head;
+ struct acpi_global_notify_handler *global;
};
/* Generic state is union of structs above */
u32 name; /* 4-byte name or zero if no name */
};
-/* This version is used by the i_aSL compiler only */
+/* This version is used by the iASL compiler only */
#define ACPI_MAX_PARSEOP_NAME 20
#define ACPI_PARSEOP_IGNORE 0x01
#define ACPI_PARSEOP_PARAMLIST 0x02
#define ACPI_PARSEOP_EMPTY_TERMLIST 0x04
+#define ACPI_PARSEOP_PREDEF_CHECKED 0x08
#define ACPI_PARSEOP_SPECIAL 0x10
/*****************************************************************************
#define ACPI_MEM_LIST_MAX 1
#define ACPI_NUM_MEM_LISTS 2
+/*****************************************************************************
+ *
+ * Info/help support
+ *
+ ****************************************************************************/
+
+struct ah_predefined_name {
+ char *name;
+ char *description;
+#ifndef ACPI_ASL_COMPILER
+ char *action;
+#endif
+};
+
#endif /* __ACLOCAL_H__ */
* printf() format helpers
*/
-/* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */
+/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */
#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i), ACPI_LODWORD(i)
#define ACPI_INSERT_BITS(target, mask, source) target = ((target & (~(mask))) | (source & mask))
/*
- * A struct acpi_namespace_node can appear in some contexts
- * where a pointer to a union acpi_operand_object can also
+ * An object of type struct acpi_namespace_node can appear in some contexts
+ * where a pointer to an object of type union acpi_operand_object can also
* appear. This macro is used to distinguish them.
*
* The "Descriptor" field is the first field in both structures.
};
/*
- * Note: The String and Buffer object must be identical through the Pointer
- * and length elements. There is code that depends on this.
+ * Note: The String and Buffer object must be identical through the
+ * pointer and length elements. There is code that depends on this.
*
* Fields common to both Strings and Buffers
*/
* Common fields for objects that support ASL notifications
*/
#define ACPI_COMMON_NOTIFY_INFO \
- union acpi_operand_object *system_notify; /* Handler for system notifies */\
- union acpi_operand_object *device_notify; /* Handler for driver notifies */\
+ union acpi_operand_object *notify_list[2]; /* Handlers for system/device notifies */\
union acpi_operand_object *handler; /* Handler for Address space */
struct acpi_object_notify_common { /* COMMON NOTIFY for POWER, PROCESSOR, DEVICE, and THERMAL */
struct acpi_object_notify_handler {
ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *node; /* Parent device */
- u32 handler_type;
- acpi_notify_handler handler;
+ u32 handler_type; /* Type: Device/System/Both */
+ acpi_notify_handler handler; /* Handler address */
void *context;
- struct acpi_object_notify_handler *next;
+ union acpi_operand_object *next[2]; /* Device and System handler lists */
};
struct acpi_object_addr_handler {
/******************************************************************************
*
- * union acpi_operand_object Descriptor - a giant union of all of the above
+ * union acpi_operand_object descriptor - a giant union of all of the above
*
*****************************************************************************/
*
* The main entries in the table each contain the following items:
*
- * Name - The ACPI reserved name
+ * name - The ACPI reserved name
* param_count - Number of arguments to the method
* expected_btypes - Allowed type(s) for the return value.
* 0 means that no return value is expected.
{{"_TMP", 0, ACPI_RTYPE_INTEGER}},
{{"_TPC", 0, ACPI_RTYPE_INTEGER}},
{{"_TPT", 1, 0}},
- {{"_TRT", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 2_ref/6_int */
+ {{"_TRT", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 2 Ref/6 Int */
{{{ACPI_PTYPE2, ACPI_RTYPE_REFERENCE, 2, ACPI_RTYPE_INTEGER}, 6, 0}},
- {{"_TSD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5_int with count */
+ {{"_TSD", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5 Int with count */
{{{ACPI_PTYPE2_COUNT,ACPI_RTYPE_INTEGER, 5,0}, 0,0}},
{{"_TSP", 0, ACPI_RTYPE_INTEGER}},
- {{"_TSS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5_int */
+ {{"_TSS", 0, ACPI_RTYPE_PACKAGE}}, /* Variable-length (Pkgs) each 5 Int */
{{{ACPI_PTYPE2, ACPI_RTYPE_INTEGER, 5,0}, 0,0}},
{{"_TST", 0, ACPI_RTYPE_INTEGER}},
#define ACPI_WALK_METHOD 0x01
#define ACPI_WALK_METHOD_RESTART 0x02
-/* Flags for i_aSL compiler only */
+/* Flags for iASL compiler only */
#define ACPI_WALK_CONST_REQUIRED 0x10
#define ACPI_WALK_CONST_OPTIONAL 0x20
/*
* utmisc
*/
+void ut_convert_backslashes(char *pathname);
+
const char *acpi_ut_validate_exception(acpi_status status);
u8 acpi_ut_is_pci_root_bridge(char *id);
/*
* Combination opcodes (actually two one-byte opcodes)
- * Used by the disassembler and i_aSL compiler
+ * Used by the disassembler and iASL compiler
*/
#define AML_LGREATEREQUAL_OP (u16) 0x9295
#define AML_LLESSEQUAL_OP (u16) 0x9294
/* Multiple/complex types */
-#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a Node - Used only by size_of operator */
+#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a node - Used only by size_of operator */
#define ARGI_COMPLEXOBJ 0x13 /* Buffer, String, or package (Used by INDEX op only) */
#define ARGI_REF_OR_STRING 0x14 /* Reference or String (Used by DEREFOF op only) */
#define ARGI_REGION_OR_BUFFER 0x15 /* Used by LOAD op only */
#define ACPI_RESTAG_TRANSLATION "_TRA"
#define ACPI_RESTAG_TRANSTYPE "_TRS" /* Sparse(1), Dense(0) */
#define ACPI_RESTAG_TYPE "_TTP" /* Translation(1), Static (0) */
-#define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8_and16(1), 16(2) */
+#define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8And16(1), 16(2) */
#define ACPI_RESTAG_VENDORDATA "_VEN"
/* Default sizes for "small" resource descriptors */
struct aml_resource_extended_address64 {
AML_RESOURCE_LARGE_HEADER_COMMON
- AML_RESOURCE_ADDRESS_COMMON u8 revision_iD;
+ AML_RESOURCE_ADDRESS_COMMON u8 revision_ID;
u8 reserved;
u64 granularity;
u64 minimum;
*
* FUNCTION: acpi_ds_execute_arguments
*
- * PARAMETERS: Node - Object NS node
+ * PARAMETERS: node - Object NS node
* scope_node - Parent NS node
* aml_length - Length of executable AML
* aml_start - Pointer to the AML
* FUNCTION: acpi_ds_exec_begin_control_op
*
* PARAMETERS: walk_list - The list that owns the walk stack
- * Op - The control Op
+ * op - The control Op
*
* RETURN: Status
*
* FUNCTION: acpi_ds_exec_end_control_op
*
* PARAMETERS: walk_list - The list that owns the walk stack
- * Op - The control Op
+ * op - The control Op
*
* RETURN: Status
*
ACPI_MODULE_NAME("dsfield")
/* Local prototypes */
+#ifdef ACPI_ASL_COMPILER
+#include "acdisasm.h"
+static acpi_status
+acpi_ds_create_external_region(acpi_status lookup_status,
+ union acpi_parse_object *op,
+ char *path,
+ struct acpi_walk_state *walk_state,
+ struct acpi_namespace_node **node);
+#endif
+
static acpi_status
acpi_ds_get_field_names(struct acpi_create_field_info *info,
struct acpi_walk_state *walk_state,
union acpi_parse_object *arg);
+#ifdef ACPI_ASL_COMPILER
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ds_create_external_region (iASL Disassembler only)
+ *
+ * PARAMETERS: lookup_status - Status from ns_lookup operation
+ * op - Op containing the Field definition and args
+ * path - Pathname of the region
+ * ` walk_state - Current method state
+ * node - Where the new region node is returned
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Add region to the external list if NOT_FOUND. Create a new
+ * region node/object.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ds_create_external_region(acpi_status lookup_status,
+ union acpi_parse_object *op,
+ char *path,
+ struct acpi_walk_state *walk_state,
+ struct acpi_namespace_node **node)
+{
+ acpi_status status;
+ union acpi_operand_object *obj_desc;
+
+ if (lookup_status != AE_NOT_FOUND) {
+ return (lookup_status);
+ }
+
+ /*
+ * Table disassembly:
+ * operation_region not found. Generate an External for it, and
+ * insert the name into the namespace.
+ */
+ acpi_dm_add_to_external_list(op, path, ACPI_TYPE_REGION, 0);
+ status = acpi_ns_lookup(walk_state->scope_info, path, ACPI_TYPE_REGION,
+ ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT,
+ walk_state, node);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /* Must create and install a region object for the new node */
+
+ obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_REGION);
+ if (!obj_desc) {
+ return (AE_NO_MEMORY);
+ }
+
+ obj_desc->region.node = *node;
+ status = acpi_ns_attach_object(*node, obj_desc, ACPI_TYPE_REGION);
+ return (status);
+}
+#endif
+
/*******************************************************************************
*
* FUNCTION: acpi_ds_create_buffer_field
*
- * PARAMETERS: Op - Current parse op (create_xXField)
+ * PARAMETERS: op - Current parse op (create_XXField)
* walk_state - Current state
*
* RETURN: Status
arg = acpi_ps_get_arg(op, 3);
} else {
- /* For all other create_xXXField operators, name is the 3rd argument */
+ /* For all other create_XXXField operators, name is the 3rd argument */
arg = acpi_ps_get_arg(op, 2);
}
*
* FUNCTION: acpi_ds_get_field_names
*
- * PARAMETERS: Info - create_field info structure
+ * PARAMETERS: info - create_field info structure
* ` walk_state - Current method state
- * Arg - First parser arg for the field name list
+ * arg - First parser arg for the field name list
*
* RETURN: Status
*
while (arg) {
/*
* Four types of field elements are handled:
- * 1) Name - Enters a new named field into the namespace
- * 2) Offset - specifies a bit offset
+ * 1) name - Enters a new named field into the namespace
+ * 2) offset - specifies a bit offset
* 3) access_as - changes the access mode/attributes
- * 4) Connection - Associate a resource template with the field
+ * 4) connection - Associate a resource template with the field
*/
switch (arg->common.aml_opcode) {
case AML_INT_RESERVEDFIELD_OP:
*
* FUNCTION: acpi_ds_create_field
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* ` walk_state - Current method state
*
/* First arg is the name of the parent op_region (must already exist) */
arg = op->common.value.arg;
+
if (!region_node) {
status =
acpi_ns_lookup(walk_state->scope_info,
arg->common.value.name, ACPI_TYPE_REGION,
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, ®ion_node);
+#ifdef ACPI_ASL_COMPILER
+ status = acpi_ds_create_external_region(status, arg,
+ arg->common.value.name,
+ walk_state,
+ ®ion_node);
+#endif
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_ds_init_field_objects
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* ` walk_state - Current method state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_create_bank_field
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* walk_state - Current method state
*
arg->common.value.name, ACPI_TYPE_REGION,
ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
walk_state, ®ion_node);
+#ifdef ACPI_ASL_COMPILER
+ status = acpi_ds_create_external_region(status, arg,
+ arg->common.value.name,
+ walk_state,
+ ®ion_node);
+#endif
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_ds_create_index_field
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* ` walk_state - Current method state
*
* FUNCTION: acpi_ds_init_one_object
*
* PARAMETERS: obj_handle - Node for the object
- * Level - Current nesting level
- * Context - Points to a init info struct
+ * level - Current nesting level
+ * context - Points to a init info struct
* return_value - Not used
*
* RETURN: Status
*
* FUNCTION: acpi_ds_method_error
*
- * PARAMETERS: Status - Execution status
+ * PARAMETERS: status - Execution status
* walk_state - Current state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_call_control_method
*
- * PARAMETERS: Thread - Info for this thread
+ * PARAMETERS: thread - Info for this thread
* this_walk_state - Current walk state
- * Op - Current Op to be walked
+ * op - Current Op to be walked
*
* RETURN: Status
*
*
* FUNCTION: acpi_ds_method_data_init_args
*
- * PARAMETERS: *Params - Pointer to a parameter list for the method
+ * PARAMETERS: *params - Pointer to a parameter list for the method
* max_param_count - The arg count for this method
* walk_state - Current walk state object
*
*
* FUNCTION: acpi_ds_method_data_get_node
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which Local or Arg whose type to get
+ * index - Which Local or Arg whose type to get
* walk_state - Current walk state object
- * Node - Where the node is returned.
+ * node - Where the node is returned.
*
* RETURN: Status and node
*
*
* FUNCTION: acpi_ds_method_data_set_value
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which Local or Arg to get
- * Object - Object to be inserted into the stack entry
+ * index - Which Local or Arg to get
+ * object - Object to be inserted into the stack entry
* walk_state - Current walk state object
*
* RETURN: Status
* Increment ref count so object can't be deleted while installed.
* NOTE: We do not copy the object in order to preserve the call by
* reference semantics of ACPI Control Method invocation.
- * (See ACPI Specification 2.0_c)
+ * (See ACPI Specification 2.0C)
*/
acpi_ut_add_reference(object);
*
* FUNCTION: acpi_ds_method_data_get_value
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which local_var or argument to get
+ * index - Which localVar or argument to get
* walk_state - Current walk state object
* dest_desc - Where Arg or Local value is returned
*
*
* FUNCTION: acpi_ds_method_data_delete_value
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which local_var or argument to delete
+ * index - Which localVar or argument to delete
* walk_state - Current walk state object
*
* RETURN: None
*
* FUNCTION: acpi_ds_store_object_to_local
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which Local or Arg to set
+ * index - Which Local or Arg to set
* obj_desc - Value to be stored
* walk_state - Current walk state
*
*
* FUNCTION: acpi_ds_method_data_get_type
*
- * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP
- * Index - Which Local or Arg whose type to get
+ * PARAMETERS: opcode - Either AML_LOCAL_OP or AML_ARG_OP
+ * index - Which Local or Arg whose type to get
* walk_state - Current walk state object
*
* RETURN: Data type of current value of the selected Arg or Local
* FUNCTION: acpi_ds_build_internal_object
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser object to be translated
+ * op - Parser object to be translated
* obj_desc_ptr - Where the ACPI internal object is returned
*
* RETURN: Status
* FUNCTION: acpi_ds_build_internal_buffer_obj
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser object to be translated
+ * op - Parser object to be translated
* buffer_length - Length of the buffer
* obj_desc_ptr - Where the ACPI internal object is returned
*
* FUNCTION: acpi_ds_build_internal_package_obj
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser object to be translated
+ * op - Parser object to be translated
* element_count - Number of elements in the package - this is
* the num_elements argument to Package()
* obj_desc_ptr - Where the ACPI internal object is returned
* FUNCTION: acpi_ds_create_node
*
* PARAMETERS: walk_state - Current walk state
- * Node - NS Node to be initialized
- * Op - Parser object to be translated
+ * node - NS Node to be initialized
+ * op - Parser object to be translated
*
* RETURN: Status
*
* FUNCTION: acpi_ds_init_object_from_op
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser op used to init the internal object
- * Opcode - AML opcode associated with the object
+ * op - Parser op used to init the internal object
+ * opcode - AML opcode associated with the object
* ret_obj_desc - Namespace object to be initialized
*
* RETURN: Status
* FUNCTION: acpi_ds_eval_buffer_field_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid buffer_field Op object
+ * op - A valid buffer_field Op object
*
* RETURN: Status
*
* FUNCTION: acpi_ds_eval_region_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid region Op object
+ * op - A valid region Op object
*
* RETURN: Status
*
*/
node = op->common.node;
- /* next_op points to the op that holds the space_iD */
+ /* next_op points to the op that holds the space_ID */
next_op = op->common.value.arg;
* FUNCTION: acpi_ds_eval_table_region_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid region Op object
+ * op - A valid region Op object
*
* RETURN: Status
*
* FUNCTION: acpi_ds_eval_data_object_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid data_object Op object
+ * op - A valid data_object Op object
* obj_desc - data_object
*
* RETURN: Status
* FUNCTION: acpi_ds_eval_bank_field_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid bank_field Op object
+ * op - A valid bank_field Op object
*
* RETURN: Status
*
*
* FUNCTION: acpi_ds_is_result_used
*
- * PARAMETERS: Op - Current Op
+ * PARAMETERS: op - Current Op
* walk_state - Current State
*
* RETURN: TRUE if result is used, FALSE otherwise
*
* FUNCTION: acpi_ds_delete_result_if_not_used
*
- * PARAMETERS: Op - Current parse Op
+ * PARAMETERS: op - Current parse Op
* result_obj - Result of the operation
* walk_state - Current state
*
* FUNCTION: acpi_ds_create_operand
*
* PARAMETERS: walk_state - Current walk state
- * Arg - Parse object for the argument
+ * arg - Parse object for the argument
* arg_index - Which argument (zero based)
*
* RETURN: Status
*
* FUNCTION: acpi_ds_scope_stack_push
*
- * PARAMETERS: Node - Name to be made current
- * Type - Type of frame being pushed
+ * PARAMETERS: node - Name to be made current
+ * type - Type of frame being pushed
* walk_state - Current state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_result_pop
*
- * PARAMETERS: Object - Where to return the popped object
+ * PARAMETERS: object - Where to return the popped object
* walk_state - Current Walk state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_result_push
*
- * PARAMETERS: Object - Where to return the popped object
+ * PARAMETERS: object - Where to return the popped object
* walk_state - Current Walk state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_obj_stack_push
*
- * PARAMETERS: Object - Object to push
+ * PARAMETERS: object - Object to push
* walk_state - Current Walk state
*
* RETURN: Status
*
* FUNCTION: acpi_ds_get_current_walk_state
*
- * PARAMETERS: Thread - Get current active state for this Thread
+ * PARAMETERS: thread - Get current active state for this Thread
*
* RETURN: Pointer to the current walk state
*
* FUNCTION: acpi_ds_push_walk_state
*
* PARAMETERS: walk_state - State to push
- * Thread - Thread state object
+ * thread - Thread state object
*
* RETURN: None
*
*
* FUNCTION: acpi_ds_pop_walk_state
*
- * PARAMETERS: Thread - Current thread state
+ * PARAMETERS: thread - Current thread state
*
* RETURN: A walk_state object popped from the thread's stack
*
* FUNCTION: acpi_ds_create_walk_state
*
* PARAMETERS: owner_id - ID for object creation
- * Origin - Starting point for this walk
+ * origin - Starting point for this walk
* method_desc - Method object
- * Thread - Current thread state
+ * thread - Current thread state
*
* RETURN: Pointer to the new walk state.
*
* FUNCTION: acpi_ds_init_aml_walk
*
* PARAMETERS: walk_state - New state to be initialized
- * Op - Current parse op
+ * op - Current parse op
* method_node - Control method NS node, if any
* aml_start - Start of AML
* aml_length - Length of AML
- * Info - Method info block (params, etc.)
+ * info - Method info block (params, etc.)
* pass_number - 1, 2, or 3
*
* RETURN: Status
*
* FUNCTION: acpi_ev_fixed_event_dispatch
*
- * PARAMETERS: Event - Event type
+ * PARAMETERS: event - Event type
*
* RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
*
*
* FUNCTION: acpi_ev_global_lock_handler
*
- * PARAMETERS: Context - From thread interface, not used
+ * PARAMETERS: context - From thread interface, not used
*
* RETURN: ACPI_INTERRUPT_HANDLED
*
*
* FUNCTION: acpi_ev_acquire_global_lock
*
- * PARAMETERS: Timeout - Max time to wait for the lock, in millisec.
+ * PARAMETERS: timeout - Max time to wait for the lock, in millisec.
*
* RETURN: Status
*
acpi_status status;
struct acpi_gpe_event_info *local_gpe_event_info;
struct acpi_evaluate_info *info;
- struct acpi_gpe_notify_object *notify_object;
+ struct acpi_gpe_notify_info *notify;
ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
* completes. The notify handlers are NOT invoked synchronously
* from this thread -- because handlers may in turn run other
* control methods.
+ *
+ * June 2012: Expand implicit notify mechanism to support
+ * notifies on multiple device objects.
*/
- status = acpi_ev_queue_notify_request(
- local_gpe_event_info->dispatch.device.node,
- ACPI_NOTIFY_DEVICE_WAKE);
-
- notify_object = local_gpe_event_info->dispatch.device.next;
- while (ACPI_SUCCESS(status) && notify_object) {
- status = acpi_ev_queue_notify_request(
- notify_object->node,
- ACPI_NOTIFY_DEVICE_WAKE);
- notify_object = notify_object->next;
+ notify = local_gpe_event_info->dispatch.notify_list;
+ while (ACPI_SUCCESS(status) && notify) {
+ status =
+ acpi_ev_queue_notify_request(notify->device_node,
+ ACPI_NOTIFY_DEVICE_WAKE);
+
+ notify = notify->next;
}
break;
* FUNCTION: acpi_ev_create_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE block
- * gpe_block_address - Address and space_iD
+ * gpe_block_address - Address and space_ID
* register_count - Number of GPE register pairs in the block
* gpe_block_base_number - Starting GPE number for the block
* interrupt_number - H/W interrupt for the block
* FUNCTION: acpi_ev_walk_gpe_list
*
* PARAMETERS: gpe_walk_callback - Routine called for each GPE block
- * Context - Value passed to callback
+ * context - Value passed to callback
*
* RETURN: Status
*
void *context)
{
struct acpi_gpe_event_info *gpe_event_info;
+ struct acpi_gpe_notify_info *notify;
+ struct acpi_gpe_notify_info *next;
u32 i;
u32 j;
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_HANDLER) {
+
+ /* Delete an installed handler block */
+
ACPI_FREE(gpe_event_info->dispatch.handler);
gpe_event_info->dispatch.handler = NULL;
gpe_event_info->flags &=
~ACPI_GPE_DISPATCH_MASK;
+ } else if ((gpe_event_info->
+ flags & ACPI_GPE_DISPATCH_MASK) ==
+ ACPI_GPE_DISPATCH_NOTIFY) {
+
+ /* Delete the implicit notification device list */
+
+ notify = gpe_event_info->dispatch.notify_list;
+ while (notify) {
+ next = notify->next;
+ ACPI_FREE(notify);
+ notify = next;
+ }
+ gpe_event_info->dispatch.notify_list = NULL;
+ gpe_event_info->flags &=
+ ~ACPI_GPE_DISPATCH_MASK;
}
}
}
*
* FUNCTION: acpi_ev_is_notify_object
*
- * PARAMETERS: Node - Node to check
+ * PARAMETERS: node - Node to check
*
* RETURN: TRUE if notifies allowed on this object
*
*
* FUNCTION: acpi_ev_queue_notify_request
*
- * PARAMETERS: Node - NS node for the notified object
+ * PARAMETERS: node - NS node for the notified object
* notify_value - Value from the Notify() request
*
* RETURN: Status
u32 notify_value)
{
union acpi_operand_object *obj_desc;
- union acpi_operand_object *handler_obj = NULL;
- union acpi_generic_state *notify_info;
+ union acpi_operand_object *handler_list_head = NULL;
+ union acpi_generic_state *info;
+ u8 handler_list_id = 0;
acpi_status status = AE_OK;
ACPI_FUNCTION_NAME(ev_queue_notify_request);
- /*
- * For value 0x03 (Ejection Request), may need to run a device method.
- * For value 0x02 (Device Wake), if _PRW exists, may need to run
- * the _PS0 method.
- * For value 0x80 (Status Change) on the power button or sleep button,
- * initiate soft-off or sleep operation.
- *
- * For all cases, simply dispatch the notify to the handler.
- */
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n",
- acpi_ut_get_node_name(node),
- acpi_ut_get_type_name(node->type), notify_value,
- acpi_ut_get_notify_name(notify_value), node));
+ /* Are Notifies allowed on this object? */
- /* Get the notify object attached to the NS Node */
-
- obj_desc = acpi_ns_get_attached_object(node);
- if (obj_desc) {
-
- /* We have the notify object, Get the correct handler */
-
- switch (node->type) {
+ if (!acpi_ev_is_notify_object(node)) {
+ return (AE_TYPE);
+ }
- /* Notify is allowed only on these types */
+ /* Get the correct notify list type (System or Device) */
- case ACPI_TYPE_DEVICE:
- case ACPI_TYPE_THERMAL:
- case ACPI_TYPE_PROCESSOR:
+ if (notify_value <= ACPI_MAX_SYS_NOTIFY) {
+ handler_list_id = ACPI_SYSTEM_HANDLER_LIST;
+ } else {
+ handler_list_id = ACPI_DEVICE_HANDLER_LIST;
+ }
- if (notify_value <= ACPI_MAX_SYS_NOTIFY) {
- handler_obj =
- obj_desc->common_notify.system_notify;
- } else {
- handler_obj =
- obj_desc->common_notify.device_notify;
- }
- break;
+ /* Get the notify object attached to the namespace Node */
- default:
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (obj_desc) {
- /* All other types are not supported */
+ /* We have an attached object, Get the correct handler list */
- return (AE_TYPE);
- }
+ handler_list_head =
+ obj_desc->common_notify.notify_list[handler_list_id];
}
/*
- * If there is a handler to run, schedule the dispatcher.
- * Check for:
- * 1) Global system notify handler
- * 2) Global device notify handler
- * 3) Per-device notify handler
+ * If there is no notify handler (Global or Local)
+ * for this object, just ignore the notify
*/
- if ((acpi_gbl_system_notify.handler &&
- (notify_value <= ACPI_MAX_SYS_NOTIFY)) ||
- (acpi_gbl_device_notify.handler &&
- (notify_value > ACPI_MAX_SYS_NOTIFY)) || handler_obj) {
- notify_info = acpi_ut_create_generic_state();
- if (!notify_info) {
- return (AE_NO_MEMORY);
- }
+ if (!acpi_gbl_global_notify[handler_list_id].handler
+ && !handler_list_head) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "No notify handler for Notify, ignoring (%4.4s, %X) node %p\n",
+ acpi_ut_get_node_name(node), notify_value,
+ node));
- if (!handler_obj) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Executing system notify handler for Notify (%4.4s, %X) "
- "node %p\n",
- acpi_ut_get_node_name(node),
- notify_value, node));
- }
+ return (AE_OK);
+ }
- notify_info->common.descriptor_type =
- ACPI_DESC_TYPE_STATE_NOTIFY;
- notify_info->notify.node = node;
- notify_info->notify.value = (u16) notify_value;
- notify_info->notify.handler_obj = handler_obj;
+ /* Setup notify info and schedule the notify dispatcher */
- status =
- acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_notify_dispatch,
- notify_info);
- if (ACPI_FAILURE(status)) {
- acpi_ut_delete_generic_state(notify_info);
- }
- } else {
- /* There is no notify handler (per-device or system) for this device */
+ info = acpi_ut_create_generic_state();
+ if (!info) {
+ return (AE_NO_MEMORY);
+ }
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "No notify handler for Notify (%4.4s, %X) node %p\n",
- acpi_ut_get_node_name(node), notify_value,
- node));
+ info->common.descriptor_type = ACPI_DESC_TYPE_STATE_NOTIFY;
+
+ info->notify.node = node;
+ info->notify.value = (u16)notify_value;
+ info->notify.handler_list_id = handler_list_id;
+ info->notify.handler_list_head = handler_list_head;
+ info->notify.global = &acpi_gbl_global_notify[handler_list_id];
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Dispatching Notify on [%4.4s] (%s) Value 0x%2.2X (%s) Node %p\n",
+ acpi_ut_get_node_name(node),
+ acpi_ut_get_type_name(node->type), notify_value,
+ acpi_ut_get_notify_name(notify_value), node));
+
+ status = acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_notify_dispatch,
+ info);
+ if (ACPI_FAILURE(status)) {
+ acpi_ut_delete_generic_state(info);
}
return (status);
*
* FUNCTION: acpi_ev_notify_dispatch
*
- * PARAMETERS: Context - To be passed to the notify handler
+ * PARAMETERS: context - To be passed to the notify handler
*
* RETURN: None.
*
static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context)
{
- union acpi_generic_state *notify_info =
- (union acpi_generic_state *)context;
- acpi_notify_handler global_handler = NULL;
- void *global_context = NULL;
+ union acpi_generic_state *info = (union acpi_generic_state *)context;
union acpi_operand_object *handler_obj;
ACPI_FUNCTION_ENTRY();
- /*
- * We will invoke a global notify handler if installed. This is done
- * _before_ we invoke the per-device handler attached to the device.
- */
- if (notify_info->notify.value <= ACPI_MAX_SYS_NOTIFY) {
-
- /* Global system notification handler */
-
- if (acpi_gbl_system_notify.handler) {
- global_handler = acpi_gbl_system_notify.handler;
- global_context = acpi_gbl_system_notify.context;
- }
- } else {
- /* Global driver notification handler */
-
- if (acpi_gbl_device_notify.handler) {
- global_handler = acpi_gbl_device_notify.handler;
- global_context = acpi_gbl_device_notify.context;
- }
- }
-
- /* Invoke the system handler first, if present */
+ /* Invoke a global notify handler if installed */
- if (global_handler) {
- global_handler(notify_info->notify.node,
- notify_info->notify.value, global_context);
+ if (info->notify.global->handler) {
+ info->notify.global->handler(info->notify.node,
+ info->notify.value,
+ info->notify.global->context);
}
- /* Now invoke the per-device handler, if present */
+ /* Now invoke the local notify handler(s) if any are installed */
- handler_obj = notify_info->notify.handler_obj;
- if (handler_obj) {
- struct acpi_object_notify_handler *notifier;
+ handler_obj = info->notify.handler_list_head;
+ while (handler_obj) {
+ handler_obj->notify.handler(info->notify.node,
+ info->notify.value,
+ handler_obj->notify.context);
- notifier = &handler_obj->notify;
- while (notifier) {
- notifier->handler(notify_info->notify.node,
- notify_info->notify.value,
- notifier->context);
- notifier = notifier->next;
- }
+ handler_obj =
+ handler_obj->notify.next[info->notify.handler_list_id];
}
/* All done with the info object */
- acpi_ut_delete_generic_state(notify_info);
+ acpi_ut_delete_generic_state(info);
}
#if (!ACPI_REDUCED_HARDWARE)
*
* FUNCTION: acpi_ev_has_default_handler
*
- * PARAMETERS: Node - Namespace node for the device
+ * PARAMETERS: node - Namespace node for the device
* space_id - The address space ID
*
* RETURN: TRUE if default handler is installed, FALSE otherwise
* FUNCTION: acpi_ev_execute_reg_method
*
* PARAMETERS: region_obj - Region object
- * Function - Passed to _REG: On (1) or Off (0)
+ * function - Passed to _REG: On (1) or Off (0)
*
* RETURN: Status
*
/*
* The _REG method has two arguments:
*
- * Arg0 - Integer:
+ * arg0 - Integer:
* Operation region space ID Same value as region_obj->Region.space_id
*
- * Arg1 - Integer:
+ * arg1 - Integer:
* connection status 1 for connecting the handler, 0 for disconnecting
* the handler (Passed as a parameter)
*/
*
* PARAMETERS: region_obj - Internal region object
* field_obj - Corresponding field. Can be NULL.
- * Function - Read or Write operation
+ * function - Read or Write operation
* region_offset - Where in the region to read or write
* bit_width - Field width in bits (8, 16, 32, or 64)
- * Value - Pointer to in or out value, must be
+ * value - Pointer to in or out value, must be
* a full 64-bit integer
*
* RETURN: Status
*
* FUNCTION: acpi_ev_install_space_handler
*
- * PARAMETERS: Node - Namespace node for the device
+ * PARAMETERS: node - Namespace node for the device
* space_id - The address space ID
- * Handler - Address of the handler
- * Setup - Address of the setup function
- * Context - Value passed to the handler on each access
+ * handler - Address of the handler
+ * setup - Address of the setup function
+ * context - Value passed to the handler on each access
*
* RETURN: Status
*
*
* FUNCTION: acpi_ev_execute_reg_methods
*
- * PARAMETERS: Node - Namespace node for the device
+ * PARAMETERS: node - Namespace node for the device
* space_id - The address space ID
*
* RETURN: Status
*
* PARAMETERS: walk_namespace callback
*
- * DESCRIPTION: Run _REG method for region objects of the requested space_iD
+ * DESCRIPTION: Run _REG method for region objects of the requested spaceID
*
******************************************************************************/
*
* FUNCTION: acpi_ev_system_memory_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_io_space_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_pci_config_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_is_pci_root_bridge
*
- * PARAMETERS: Node - Device node being examined
+ * PARAMETERS: node - Device node being examined
*
* RETURN: TRUE if device is a PCI/PCI-Express Root Bridge
*
*
* FUNCTION: acpi_ev_pci_bar_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
* RETURN: Status
*
- * DESCRIPTION: Setup a pci_bAR operation region
+ * DESCRIPTION: Setup a pci_BAR operation region
*
* MUTEX: Assumes namespace is not locked
*
*
* FUNCTION: acpi_ev_cmos_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_default_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
*
* FUNCTION: acpi_ev_sci_xrupt_handler
*
- * PARAMETERS: Context - Calling Context
+ * PARAMETERS: context - Calling Context
*
* RETURN: Status code indicates whether interrupt was handled.
*
*
* FUNCTION: acpi_ev_gpe_xrupt_handler
*
- * PARAMETERS: Context - Calling Context
+ * PARAMETERS: context - Calling Context
*
* RETURN: Status code indicates whether interrupt was handled.
*
ACPI_MODULE_NAME("evxface")
-/*******************************************************************************
- *
- * FUNCTION: acpi_populate_handler_object
- *
- * PARAMETERS: handler_obj - Handler object to populate
- * handler_type - The type of handler:
- * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
- * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
- * ACPI_ALL_NOTIFY: both system and device
- * handler - Address of the handler
- * context - Value passed to the handler on each GPE
- * next - Address of a handler object to link to
- *
- * RETURN: None
- *
- * DESCRIPTION: Populate a handler object.
- *
- ******************************************************************************/
-static void
-acpi_populate_handler_object(struct acpi_object_notify_handler *handler_obj,
- u32 handler_type,
- acpi_notify_handler handler, void *context,
- struct acpi_object_notify_handler *next)
-{
- handler_obj->handler_type = handler_type;
- handler_obj->handler = handler;
- handler_obj->context = context;
- handler_obj->next = next;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_add_handler_object
- *
- * PARAMETERS: parent_obj - Parent of the new object
- * handler - Address of the handler
- * context - Value passed to the handler on each GPE
- *
- * RETURN: Status
- *
- * DESCRIPTION: Create a new handler object and populate it.
- *
- ******************************************************************************/
-static acpi_status
-acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj,
- acpi_notify_handler handler, void *context)
-{
- struct acpi_object_notify_handler *handler_obj;
-
- /* The parent must not be a defice notify handler object. */
- if (parent_obj->handler_type & ACPI_DEVICE_NOTIFY)
- return AE_BAD_PARAMETER;
-
- handler_obj = ACPI_ALLOCATE_ZEROED(sizeof(*handler_obj));
- if (!handler_obj)
- return AE_NO_MEMORY;
-
- acpi_populate_handler_object(handler_obj,
- ACPI_SYSTEM_NOTIFY,
- handler, context,
- parent_obj->next);
- parent_obj->next = handler_obj;
-
- return AE_OK;
-}
-
-
/*******************************************************************************
*
* FUNCTION: acpi_install_notify_handler
*
* PARAMETERS: Device - The device for which notifies will be handled
* handler_type - The type of handler:
- * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
- * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
- * ACPI_ALL_NOTIFY: both system and device
+ * ACPI_SYSTEM_NOTIFY: System Handler (00-7F)
+ * ACPI_DEVICE_NOTIFY: Device Handler (80-FF)
+ * ACPI_ALL_NOTIFY: Both System and Device
* Handler - Address of the handler
* Context - Value passed to the handler on each GPE
*
* RETURN: Status
*
- * DESCRIPTION: Install a handler for notifies on an ACPI device
+ * DESCRIPTION: Install a handler for notifications on an ACPI Device,
+ * thermal_zone, or Processor object.
+ *
+ * NOTES: The Root namespace object may have only one handler for each
+ * type of notify (System/Device). Device/Thermal/Processor objects
+ * may have one device notify handler, and multiple system notify
+ * handlers.
*
******************************************************************************/
acpi_status
u32 handler_type,
acpi_notify_handler handler, void *context)
{
+ struct acpi_namespace_node *node =
+ ACPI_CAST_PTR(struct acpi_namespace_node, device);
union acpi_operand_object *obj_desc;
- union acpi_operand_object *notify_obj;
- struct acpi_namespace_node *node;
+ union acpi_operand_object *handler_obj;
acpi_status status;
+ u32 i;
ACPI_FUNCTION_TRACE(acpi_install_notify_handler);
/* Parameter validation */
- if ((!device) ||
- (!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
+ if ((!device) || (!handler) || (!handler_type) ||
+ (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
return_ACPI_STATUS(status);
}
- /* Convert and validate the device handle */
-
- node = acpi_ns_validate_handle(device);
- if (!node) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
-
/*
* Root Object:
* Registering a notify handler on the root object indicates that the
* caller wishes to receive notifications for all objects. Note that
- * only one <external> global handler can be regsitered (per notify type).
+ * only one global handler can be registered per notify type.
+ * Ensure that a handler is not already installed.
*/
if (device == ACPI_ROOT_OBJECT) {
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ if (acpi_gbl_global_notify[i].handler) {
+ status = AE_ALREADY_EXISTS;
+ goto unlock_and_exit;
+ }
- /* Make sure the handler is not already installed */
-
- if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
- acpi_gbl_system_notify.handler) ||
- ((handler_type & ACPI_DEVICE_NOTIFY) &&
- acpi_gbl_device_notify.handler)) {
- status = AE_ALREADY_EXISTS;
- goto unlock_and_exit;
- }
-
- if (handler_type & ACPI_SYSTEM_NOTIFY) {
- acpi_gbl_system_notify.node = node;
- acpi_gbl_system_notify.handler = handler;
- acpi_gbl_system_notify.context = context;
- }
-
- if (handler_type & ACPI_DEVICE_NOTIFY) {
- acpi_gbl_device_notify.node = node;
- acpi_gbl_device_notify.handler = handler;
- acpi_gbl_device_notify.context = context;
+ acpi_gbl_global_notify[i].handler = handler;
+ acpi_gbl_global_notify[i].context = context;
+ }
}
- /* Global notify handler installed */
+ goto unlock_and_exit; /* Global notify handler installed, all done */
}
/*
* All Other Objects:
- * Caller will only receive notifications specific to the target object.
- * Note that only certain object types can receive notifications.
+ * Caller will only receive notifications specific to the target
+ * object. Note that only certain object types are allowed to
+ * receive notifications.
*/
- else {
- /* Notifies allowed on this object? */
- if (!acpi_ev_is_notify_object(node)) {
- status = AE_TYPE;
- goto unlock_and_exit;
- }
+ /* Are Notifies allowed on this object? */
- /* Check for an existing internal object */
+ if (!acpi_ev_is_notify_object(node)) {
+ status = AE_TYPE;
+ goto unlock_and_exit;
+ }
- obj_desc = acpi_ns_get_attached_object(node);
- if (obj_desc) {
+ /* Check for an existing internal object, might not exist */
- /* Object exists. */
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (!obj_desc) {
- /* For a device notify, make sure there's no handler. */
- if ((handler_type & ACPI_DEVICE_NOTIFY) &&
- obj_desc->common_notify.device_notify) {
- status = AE_ALREADY_EXISTS;
- goto unlock_and_exit;
- }
+ /* Create a new object */
- /* System notifies may have more handlers installed. */
- notify_obj = obj_desc->common_notify.system_notify;
+ obj_desc = acpi_ut_create_internal_object(node->type);
+ if (!obj_desc) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
- if ((handler_type & ACPI_SYSTEM_NOTIFY) && notify_obj) {
- struct acpi_object_notify_handler *parent_obj;
+ /* Attach new object to the Node, remove local reference */
+
+ status = acpi_ns_attach_object(device, obj_desc, node->type);
+ acpi_ut_remove_reference(obj_desc);
+ if (ACPI_FAILURE(status)) {
+ goto unlock_and_exit;
+ }
+ }
- if (handler_type & ACPI_DEVICE_NOTIFY) {
+ /* Ensure that the handler is not already installed in the lists */
+
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ handler_obj = obj_desc->common_notify.notify_list[i];
+ while (handler_obj) {
+ if (handler_obj->notify.handler == handler) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
- parent_obj = ¬ify_obj->notify;
- status = acpi_add_handler_object(parent_obj,
- handler,
- context);
- goto unlock_and_exit;
- }
- } else {
- /* Create a new object */
-
- obj_desc = acpi_ut_create_internal_object(node->type);
- if (!obj_desc) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
- }
-
- /* Attach new object to the Node */
-
- status =
- acpi_ns_attach_object(device, obj_desc, node->type);
-
- /* Remove local reference to the object */
-
- acpi_ut_remove_reference(obj_desc);
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
+ handler_obj = handler_obj->notify.next[i];
}
}
+ }
- /* Install the handler */
+ /* Create and populate a new notify handler object */
- notify_obj =
- acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_NOTIFY);
- if (!notify_obj) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
- }
+ handler_obj = acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_NOTIFY);
+ if (!handler_obj) {
+ status = AE_NO_MEMORY;
+ goto unlock_and_exit;
+ }
- acpi_populate_handler_object(¬ify_obj->notify,
- handler_type,
- handler, context,
- NULL);
+ handler_obj->notify.node = node;
+ handler_obj->notify.handler_type = handler_type;
+ handler_obj->notify.handler = handler;
+ handler_obj->notify.context = context;
- if (handler_type & ACPI_SYSTEM_NOTIFY) {
- obj_desc->common_notify.system_notify = notify_obj;
- }
+ /* Install the handler at the list head(s) */
- if (handler_type & ACPI_DEVICE_NOTIFY) {
- obj_desc->common_notify.device_notify = notify_obj;
- }
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ handler_obj->notify.next[i] =
+ obj_desc->common_notify.notify_list[i];
- if (handler_type == ACPI_ALL_NOTIFY) {
+ obj_desc->common_notify.notify_list[i] = handler_obj;
+ }
+ }
- /* Extra ref if installed in both */
+ /* Add an extra reference if handler was installed in both lists */
- acpi_ut_add_reference(notify_obj);
- }
+ if (handler_type == ACPI_ALL_NOTIFY) {
+ acpi_ut_add_reference(handler_obj);
}
- unlock_and_exit:
+unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
*
* FUNCTION: acpi_remove_notify_handler
*
- * PARAMETERS: Device - The device for which notifies will be handled
+ * PARAMETERS: Device - The device for which the handler is installed
* handler_type - The type of handler:
- * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
- * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
- * ACPI_ALL_NOTIFY: both system and device
+ * ACPI_SYSTEM_NOTIFY: System Handler (00-7F)
+ * ACPI_DEVICE_NOTIFY: Device Handler (80-FF)
+ * ACPI_ALL_NOTIFY: Both System and Device
* Handler - Address of the handler
*
* RETURN: Status
acpi_remove_notify_handler(acpi_handle device,
u32 handler_type, acpi_notify_handler handler)
{
- union acpi_operand_object *notify_obj;
+ struct acpi_namespace_node *node =
+ ACPI_CAST_PTR(struct acpi_namespace_node, device);
union acpi_operand_object *obj_desc;
- struct acpi_namespace_node *node;
+ union acpi_operand_object *handler_obj;
+ union acpi_operand_object *previous_handler_obj;
acpi_status status;
+ u32 i;
ACPI_FUNCTION_TRACE(acpi_remove_notify_handler);
/* Parameter validation */
- if ((!device) ||
- (!handler) || (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
- status = AE_BAD_PARAMETER;
- goto exit;
+ if ((!device) || (!handler) || (!handler_type) ||
+ (handler_type > ACPI_MAX_NOTIFY_HANDLER_TYPE)) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
}
-
-
/* Make sure all deferred tasks are completed */
- acpi_os_wait_events_complete(NULL);
+
+ acpi_os_wait_events_complete();
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
- goto exit;
- }
-
- /* Convert and validate the device handle */
-
- node = acpi_ns_validate_handle(device);
- if (!node) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ return_ACPI_STATUS(status);
}
- /* Root Object */
+ /* Root Object. Global handlers are removed here */
if (device == ACPI_ROOT_OBJECT) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Removing notify handler for namespace root object\n"));
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ if (!acpi_gbl_global_notify[i].handler ||
+ (acpi_gbl_global_notify[i].handler !=
+ handler)) {
+ status = AE_NOT_EXIST;
+ goto unlock_and_exit;
+ }
- if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
- !acpi_gbl_system_notify.handler) ||
- ((handler_type & ACPI_DEVICE_NOTIFY) &&
- !acpi_gbl_device_notify.handler)) {
- status = AE_NOT_EXIST;
- goto unlock_and_exit;
- }
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Removing global notify handler\n"));
- if (handler_type & ACPI_SYSTEM_NOTIFY) {
- acpi_gbl_system_notify.node = NULL;
- acpi_gbl_system_notify.handler = NULL;
- acpi_gbl_system_notify.context = NULL;
+ acpi_gbl_global_notify[i].handler = NULL;
+ acpi_gbl_global_notify[i].context = NULL;
+ }
}
- if (handler_type & ACPI_DEVICE_NOTIFY) {
- acpi_gbl_device_notify.node = NULL;
- acpi_gbl_device_notify.handler = NULL;
- acpi_gbl_device_notify.context = NULL;
- }
+ goto unlock_and_exit;
}
- /* All Other Objects */
+ /* All other objects: Are Notifies allowed on this object? */
- else {
- /* Notifies allowed on this object? */
+ if (!acpi_ev_is_notify_object(node)) {
+ status = AE_TYPE;
+ goto unlock_and_exit;
+ }
- if (!acpi_ev_is_notify_object(node)) {
- status = AE_TYPE;
- goto unlock_and_exit;
- }
+ /* Must have an existing internal object */
- /* Check for an existing internal object */
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (!obj_desc) {
+ status = AE_NOT_EXIST;
+ goto unlock_and_exit;
+ }
- obj_desc = acpi_ns_get_attached_object(node);
- if (!obj_desc) {
- status = AE_NOT_EXIST;
- goto unlock_and_exit;
- }
+ /* Internal object exists. Find the handler and remove it */
- /* Object exists - make sure there's an existing handler */
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ if (handler_type & (i + 1)) {
+ handler_obj = obj_desc->common_notify.notify_list[i];
+ previous_handler_obj = NULL;
- if (handler_type & ACPI_SYSTEM_NOTIFY) {
- struct acpi_object_notify_handler *handler_obj;
- struct acpi_object_notify_handler *parent_obj;
+ /* Attempt to find the handler in the handler list */
- notify_obj = obj_desc->common_notify.system_notify;
- if (!notify_obj) {
- status = AE_NOT_EXIST;
- goto unlock_and_exit;
- }
-
- handler_obj = ¬ify_obj->notify;
- parent_obj = NULL;
- while (handler_obj->handler != handler) {
- if (handler_obj->next) {
- parent_obj = handler_obj;
- handler_obj = handler_obj->next;
- } else {
- break;
- }
+ while (handler_obj &&
+ (handler_obj->notify.handler != handler)) {
+ previous_handler_obj = handler_obj;
+ handler_obj = handler_obj->notify.next[i];
}
- if (handler_obj->handler != handler) {
- status = AE_BAD_PARAMETER;
+ if (!handler_obj) {
+ status = AE_NOT_EXIST;
goto unlock_and_exit;
}
- /*
- * Remove the handler. There are three possible cases.
- * First, we may need to remove a non-embedded object.
- * Second, we may need to remove the embedded object's
- * handler data, while non-embedded objects exist.
- * Finally, we may need to remove the embedded object
- * entirely along with its container.
- */
- if (parent_obj) {
- /* Non-embedded object is being removed. */
- parent_obj->next = handler_obj->next;
- ACPI_FREE(handler_obj);
- } else if (notify_obj->notify.next) {
- /*
- * The handler matches the embedded object, but
- * there are more handler objects in the list.
- * Replace the embedded object's data with the
- * first next object's data and remove that
- * object.
- */
- parent_obj = ¬ify_obj->notify;
- handler_obj = notify_obj->notify.next;
- *parent_obj = *handler_obj;
- ACPI_FREE(handler_obj);
- } else {
- /* No more handler objects in the list. */
- obj_desc->common_notify.system_notify = NULL;
- acpi_ut_remove_reference(notify_obj);
- }
- }
+ /* Remove the handler object from the list */
- if (handler_type & ACPI_DEVICE_NOTIFY) {
- notify_obj = obj_desc->common_notify.device_notify;
- if (!notify_obj) {
- status = AE_NOT_EXIST;
- goto unlock_and_exit;
- }
+ if (previous_handler_obj) { /* Handler is not at the list head */
+ previous_handler_obj->notify.next[i] =
+ handler_obj->notify.next[i];
+ } else { /* Handler is at the list head */
- if (notify_obj->notify.handler != handler) {
- status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
+ obj_desc->common_notify.notify_list[i] =
+ handler_obj->notify.next[i];
}
- /* Remove the handler */
- obj_desc->common_notify.device_notify = NULL;
- acpi_ut_remove_reference(notify_obj);
+ acpi_ut_remove_reference(handler_obj);
}
}
- unlock_and_exit:
+unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- exit:
- if (ACPI_FAILURE(status))
- ACPI_EXCEPTION((AE_INFO, status, "Removing notify handler"));
return_ACPI_STATUS(status);
}
*
* FUNCTION: acpi_install_exception_handler
*
- * PARAMETERS: Handler - Pointer to the handler function for the
+ * PARAMETERS: handler - Pointer to the handler function for the
* event
*
* RETURN: Status
*
* FUNCTION: acpi_install_global_event_handler
*
- * PARAMETERS: Handler - Pointer to the global event handler function
- * Context - Value passed to the handler on each event
+ * PARAMETERS: handler - Pointer to the global event handler function
+ * context - Value passed to the handler on each event
*
* RETURN: Status
*
*
* FUNCTION: acpi_install_fixed_event_handler
*
- * PARAMETERS: Event - Event type to enable.
- * Handler - Pointer to the handler function for the
+ * PARAMETERS: event - Event type to enable.
+ * handler - Pointer to the handler function for the
* event
- * Context - Value passed to the handler on each GPE
+ * context - Value passed to the handler on each GPE
*
* RETURN: Status
*
*
* FUNCTION: acpi_remove_fixed_event_handler
*
- * PARAMETERS: Event - Event type to disable.
- * Handler - Address of the handler
+ * PARAMETERS: event - Event type to disable.
+ * handler - Address of the handler
*
* RETURN: Status
*
* PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
* defined GPEs)
* gpe_number - The GPE number within the GPE block
- * Type - Whether this GPE should be treated as an
+ * type - Whether this GPE should be treated as an
* edge- or level-triggered interrupt.
- * Address - Address of the handler
- * Context - Value passed to the handler on each GPE
+ * address - Address of the handler
+ * context - Value passed to the handler on each GPE
*
* RETURN: Status
*
* PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
* defined GPEs)
* gpe_number - The event to remove a handler
- * Address - Address of the handler
+ * address - Address of the handler
*
* RETURN: Status
*
/* Make sure all deferred tasks are completed */
- acpi_os_wait_events_complete(NULL);
+ acpi_os_wait_events_complete();
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
*
* FUNCTION: acpi_acquire_global_lock
*
- * PARAMETERS: Timeout - How long the caller is willing to wait
- * Handle - Where the handle to the lock is returned
+ * PARAMETERS: timeout - How long the caller is willing to wait
+ * handle - Where the handle to the lock is returned
* (if acquired)
*
* RETURN: Status
*
* FUNCTION: acpi_release_global_lock
*
- * PARAMETERS: Handle - Returned from acpi_acquire_global_lock
+ * PARAMETERS: handle - Returned from acpi_acquire_global_lock
*
* RETURN: Status
*
*
* FUNCTION: acpi_enable_event
*
- * PARAMETERS: Event - The fixed eventto be enabled
- * Flags - Reserved
+ * PARAMETERS: event - The fixed eventto be enabled
+ * flags - Reserved
*
* RETURN: Status
*
*
* FUNCTION: acpi_clear_event
*
- * PARAMETERS: Event - The fixed event to be cleared
+ * PARAMETERS: event - The fixed event to be cleared
*
* RETURN: Status
*
*
* FUNCTION: acpi_get_event_status
*
- * PARAMETERS: Event - The fixed event
+ * PARAMETERS: event - The fixed event
* event_status - Where the current status of the event will
* be returned
*
acpi_setup_gpe_for_wake(acpi_handle wake_device,
acpi_handle gpe_device, u32 gpe_number)
{
- acpi_status status = AE_BAD_PARAMETER;
+ acpi_status status;
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_namespace_node *device_node;
- struct acpi_gpe_notify_object *notify_object;
+ struct acpi_gpe_notify_info *notify;
+ struct acpi_gpe_notify_info *new_notify;
acpi_cpu_flags flags;
- u8 gpe_dispatch_mask;
ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake);
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
+ /* Handle root object case */
+
+ if (wake_device == ACPI_ROOT_OBJECT) {
+ device_node = acpi_gbl_root_node;
+ } else {
+ device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
+ }
+
+ /* Validate WakeDevice is of type Device */
+
+ if (device_node->type != ACPI_TYPE_DEVICE) {
+ return_ACPI_STATUS (AE_BAD_PARAMETER);
+ }
+
+ /*
+ * Allocate a new notify object up front, in case it is needed.
+ * Memory allocation while holding a spinlock is a big no-no
+ * on some hosts.
+ */
+ new_notify = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_notify_info));
+ if (!new_notify) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
+ status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
- if (wake_device == ACPI_ROOT_OBJECT) {
- goto out;
- }
-
/*
* If there is no method or handler for this GPE, then the
- * wake_device will be notified whenever this GPE fires (aka
- * "implicit notify") Note: The GPE is assumed to be
+ * wake_device will be notified whenever this GPE fires. This is
+ * known as an "implicit notify". Note: The GPE is assumed to be
* level-triggered (for windows compatibility).
*/
- gpe_dispatch_mask = gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK;
- if (gpe_dispatch_mask != ACPI_GPE_DISPATCH_NONE
- && gpe_dispatch_mask != ACPI_GPE_DISPATCH_NOTIFY) {
- goto out;
- }
-
- /* Validate wake_device is of type Device */
-
- device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
- if (device_node->type != ACPI_TYPE_DEVICE) {
- goto unlock_and_exit;
+ if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+ ACPI_GPE_DISPATCH_NONE) {
+ /*
+ * This is the first device for implicit notify on this GPE.
+ * Just set the flags here, and enter the NOTIFY block below.
+ */
+ gpe_event_info->flags =
+ (ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED);
}
- if (gpe_dispatch_mask == ACPI_GPE_DISPATCH_NONE) {
- gpe_event_info->flags = (ACPI_GPE_DISPATCH_NOTIFY |
- ACPI_GPE_LEVEL_TRIGGERED);
- gpe_event_info->dispatch.device.node = device_node;
- gpe_event_info->dispatch.device.next = NULL;
- } else {
- /* There are multiple devices to notify implicitly. */
-
- notify_object = ACPI_ALLOCATE_ZEROED(sizeof(*notify_object));
- if (!notify_object) {
- status = AE_NO_MEMORY;
- goto unlock_and_exit;
+ /*
+ * If we already have an implicit notify on this GPE, add
+ * this device to the notify list.
+ */
+ if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+ ACPI_GPE_DISPATCH_NOTIFY) {
+
+ /* Ensure that the device is not already in the list */
+
+ notify = gpe_event_info->dispatch.notify_list;
+ while (notify) {
+ if (notify->device_node == device_node) {
+ status = AE_ALREADY_EXISTS;
+ goto unlock_and_exit;
+ }
+ notify = notify->next;
}
- notify_object->node = device_node;
- notify_object->next = gpe_event_info->dispatch.device.next;
- gpe_event_info->dispatch.device.next = notify_object;
+ /* Add this device to the notify list for this GPE */
+
+ new_notify->device_node = device_node;
+ new_notify->next = gpe_event_info->dispatch.notify_list;
+ gpe_event_info->dispatch.notify_list = new_notify;
+ new_notify = NULL;
}
- out:
+ /* Mark the GPE as a possible wake event */
+
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
status = AE_OK;
- unlock_and_exit:
+unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
+
+ /* Delete the notify object if it was not used above */
+
+ if (new_notify) {
+ ACPI_FREE(new_notify);
+ }
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake)
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
- * Action - Enable or Disable
+ * action - Enable or Disable
*
* RETURN: Status
*
* FUNCTION: acpi_install_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
- * gpe_block_address - Address and space_iD
+ * gpe_block_address - Address and space_ID
* register_count - Number of GPE register pairs in the block
* interrupt_number - H/W interrupt for the block
*
*
* FUNCTION: acpi_get_gpe_device
*
- * PARAMETERS: Index - System GPE index (0-current_gpe_count)
+ * PARAMETERS: index - System GPE index (0-current_gpe_count)
* gpe_device - Where the parent GPE Device is returned
*
* RETURN: Status
*
* FUNCTION: acpi_install_address_space_handler
*
- * PARAMETERS: Device - Handle for the device
+ * PARAMETERS: device - Handle for the device
* space_id - The address space ID
- * Handler - Address of the handler
- * Setup - Address of the setup function
- * Context - Value passed to the handler on each access
+ * handler - Address of the handler
+ * setup - Address of the setup function
+ * context - Value passed to the handler on each access
*
* RETURN: Status
*
}
/*
- * For the default space_iDs, (the IDs for which there are default region handlers
+ * For the default space_IDs, (the IDs for which there are default region handlers
* installed) Only execute the _REG methods if the global initialization _REG
* methods have already been run (via acpi_initialize_objects). In other words,
- * we will defer the execution of the _REG methods for these space_iDs until
+ * we will defer the execution of the _REG methods for these space_IDs until
* execution of acpi_initialize_objects. This is done because we need the handlers
* for the default spaces (mem/io/pci/table) to be installed before we can run
* any control methods (or _REG methods). There is known BIOS code that depends
* on this.
*
- * For all other space_iDs, we can safely execute the _REG methods immediately.
+ * For all other space_IDs, we can safely execute the _REG methods immediately.
* This means that for IDs like embedded_controller, this function should be called
* only after acpi_enable_subsystem has been called.
*/
*
* FUNCTION: acpi_remove_address_space_handler
*
- * PARAMETERS: Device - Handle for the device
+ * PARAMETERS: device - Handle for the device
* space_id - The address space ID
- * Handler - Address of the handler
+ * handler - Address of the handler
*
* RETURN: Status
*
*
* FUNCTION: acpi_ex_add_table
*
- * PARAMETERS: Table - Pointer to raw table
+ * PARAMETERS: table - Pointer to raw table
* parent_node - Where to load the table (scope)
* ddb_handle - Where to return the table handle.
*
* FUNCTION: acpi_ex_region_read
*
* PARAMETERS: obj_desc - Region descriptor
- * Length - Number of bytes to read
- * Buffer - Pointer to where to put the data
+ * length - Number of bytes to read
+ * buffer - Pointer to where to put the data
*
* RETURN: Status
*
*
* PARAMETERS: obj_desc - Region or Buffer/Field where the table will be
* obtained
- * Target - Where a handle to the table will be stored
+ * target - Where a handle to the table will be stored
* walk_state - Current state
*
* RETURN: Status
* PARAMETERS: obj_desc - Object to be converted. Must be an
* Integer, Buffer, or String
* result_desc - Where the new Integer object is returned
- * Flags - Used for string conversion
+ * flags - Used for string conversion
*
* RETURN: Status
*
*
* FUNCTION: acpi_ex_convert_to_ascii
*
- * PARAMETERS: Integer - Value to be converted
- * Base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX
- * String - Where the string is returned
+ * PARAMETERS: integer - Value to be converted
+ * base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX
+ * string - Where the string is returned
* data_width - Size of data item to be converted, in bytes
*
* RETURN: Actual string length
* PARAMETERS: obj_desc - Object to be converted. Must be an
* Integer, Buffer, or String
* result_desc - Where the string object is returned
- * Type - String flags (base and conversion type)
+ * type - String flags (base and conversion type)
*
* RETURN: Status
*
*
* DESCRIPTION: Create a new processor object and populate the fields
*
- * Processor (Name[0], cpu_iD[1], pblock_addr[2], pblock_length[3])
+ * Processor (Name[0], cpu_ID[1], pblock_addr[2], pblock_length[3])
*
******************************************************************************/
* FUNCTION: acpi_ex_do_debug_object
*
* PARAMETERS: source_desc - Object to be output to "Debug Object"
- * Level - Indentation level (used for packages)
- * Index - Current package element, zero if not pkg
+ * level - Indentation level (used for packages)
+ * index - Current package element, zero if not pkg
*
* RETURN: None
*
static struct acpi_exdump_info acpi_ex_dump_device[4] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_device), NULL},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.handler), "Handler"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.system_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.notify_list[0]),
"System Notify"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.device_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(device.notify_list[1]),
"Device Notify"}
};
"System Level"},
{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(power_resource.resource_order),
"Resource Order"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.system_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.notify_list[0]),
"System Notify"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.device_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(power_resource.notify_list[1]),
"Device Notify"}
};
{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(processor.proc_id), "Processor ID"},
{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(processor.length), "Length"},
{ACPI_EXD_ADDRESS, ACPI_EXD_OFFSET(processor.address), "Address"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.system_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.notify_list[0]),
"System Notify"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.device_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.notify_list[1]),
"Device Notify"},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.handler), "Handler"}
};
static struct acpi_exdump_info acpi_ex_dump_thermal[4] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_thermal), NULL},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.system_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.notify_list[0]),
"System Notify"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.device_notify),
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.notify_list[1]),
"Device Notify"},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(thermal_zone.handler), "Handler"}
};
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(address_space.context), "Context"}
};
-static struct acpi_exdump_info acpi_ex_dump_notify[3] = {
+static struct acpi_exdump_info acpi_ex_dump_notify[7] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_notify), NULL},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.node), "Node"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.context), "Context"}
+ {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(notify.handler_type), "Handler Type"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.handler), "Handler"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.context), "Context"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.next[0]),
+ "Next System Notify"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(notify.next[1]), "Next Device Notify"}
};
/* Miscellaneous tables */
* FUNCTION: acpi_ex_dump_object
*
* PARAMETERS: obj_desc - Descriptor to dump
- * Info - Info table corresponding to this object
+ * info - Info table corresponding to this object
* type
*
* RETURN: None
* FUNCTION: acpi_ex_dump_operand
*
* PARAMETERS: *obj_desc - Pointer to entry to be dumped
- * Depth - Current nesting depth
+ * depth - Current nesting depth
*
* RETURN: None
*
*
* FUNCTION: acpi_ex_dump_operands
*
- * PARAMETERS: Operands - A list of Operand objects
+ * PARAMETERS: operands - A list of Operand objects
* opcode_name - AML opcode name
* num_operands - Operand count for this opcode
*
*
* FUNCTION: acpi_ex_out* functions
*
- * PARAMETERS: Title - Descriptive text
- * Value - Value to be displayed
+ * PARAMETERS: title - Descriptive text
+ * value - Value to be displayed
*
* DESCRIPTION: Object dump output formatting functions. These functions
* reduce the number of format strings required and keeps them
*
* FUNCTION: acpi_ex_dump_namespace_node
*
- * PARAMETERS: Node - Descriptor to dump
- * Flags - Force display if TRUE
+ * PARAMETERS: node - Descriptor to dump
+ * flags - Force display if TRUE
*
* DESCRIPTION: Dumps the members of the given.Node
*
*
* FUNCTION: acpi_ex_dump_reference_obj
*
- * PARAMETERS: Object - Descriptor to dump
+ * PARAMETERS: object - Descriptor to dump
*
* DESCRIPTION: Dumps a reference object
*
* FUNCTION: acpi_ex_dump_package_obj
*
* PARAMETERS: obj_desc - Descriptor to dump
- * Level - Indentation Level
- * Index - Package index for this object
+ * level - Indentation Level
+ * index - Package index for this object
*
* DESCRIPTION: Dumps the elements of the package
*
case ACPI_TYPE_STRING:
acpi_os_printf("[String] Value: ");
- for (i = 0; i < obj_desc->string.length; i++) {
- acpi_os_printf("%c", obj_desc->string.pointer[i]);
- }
+ acpi_ut_print_string(obj_desc->string.pointer, ACPI_UINT8_MAX);
acpi_os_printf("\n");
break;
* FUNCTION: acpi_ex_dump_object_descriptor
*
* PARAMETERS: obj_desc - Descriptor to dump
- * Flags - Force display if TRUE
+ * flags - Force display if TRUE
*
* DESCRIPTION: Dumps the members of the object descriptor given.
*
* PARAMETERS: obj_desc - Field to be read
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
- * Value - Where to store value (must at least
+ * value - Where to store value (must at least
* 64 bits)
- * Function - Read or Write flag plus other region-
+ * function - Read or Write flag plus other region-
* dependent flags
*
* RETURN: Status
* FUNCTION: acpi_ex_register_overflow
*
* PARAMETERS: obj_desc - Register(Field) to be written
- * Value - Value to be stored
+ * value - Value to be stored
*
* RETURN: TRUE if value overflows the field, FALSE otherwise
*
* PARAMETERS: obj_desc - Field to be read
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
- * Value - Where to store value (must be 64 bits)
+ * value - Where to store value (must be 64 bits)
* read_write - Read or Write flag
*
* RETURN: Status
* FUNCTION: acpi_ex_write_with_update_rule
*
* PARAMETERS: obj_desc - Field to be written
- * Mask - bitmask within field datum
+ * mask - bitmask within field datum
* field_value - Value to write
* field_datum_byte_offset - Offset of datum within field
*
* FUNCTION: acpi_ex_extract_from_field
*
* PARAMETERS: obj_desc - Field to be read
- * Buffer - Where to store the field data
+ * buffer - Where to store the field data
* buffer_length - Length of Buffer
*
* RETURN: Status
* FUNCTION: acpi_ex_insert_into_field
*
* PARAMETERS: obj_desc - Field to be written
- * Buffer - Data to be written
+ * buffer - Data to be written
* buffer_length - Length of Buffer
*
* RETURN: Status
*
* FUNCTION: acpi_ex_concat_template
*
- * PARAMETERS: Operand0 - First source object
- * Operand1 - Second source object
+ * PARAMETERS: operand0 - First source object
+ * operand1 - Second source object
* actual_return_desc - Where to place the return object
* walk_state - Current walk state
*
*
* FUNCTION: acpi_ex_do_concatenate
*
- * PARAMETERS: Operand0 - First source object
- * Operand1 - Second source object
+ * PARAMETERS: operand0 - First source object
+ * operand1 - Second source object
* actual_return_desc - Where to place the return object
* walk_state - Current walk state
*
*
* FUNCTION: acpi_ex_do_math_op
*
- * PARAMETERS: Opcode - AML opcode
- * Integer0 - Integer operand #0
- * Integer1 - Integer operand #1
+ * PARAMETERS: opcode - AML opcode
+ * integer0 - Integer operand #0
+ * integer1 - Integer operand #1
*
* RETURN: Integer result of the operation
*
*
* FUNCTION: acpi_ex_do_logical_numeric_op
*
- * PARAMETERS: Opcode - AML opcode
- * Integer0 - Integer operand #0
- * Integer1 - Integer operand #1
+ * PARAMETERS: opcode - AML opcode
+ * integer0 - Integer operand #0
+ * integer1 - Integer operand #1
* logical_result - TRUE/FALSE result of the operation
*
* RETURN: Status
*
* FUNCTION: acpi_ex_do_logical_op
*
- * PARAMETERS: Opcode - AML opcode
- * Operand0 - operand #0
- * Operand1 - operand #1
+ * PARAMETERS: opcode - AML opcode
+ * operand0 - operand #0
+ * operand1 - operand #1
* logical_result - TRUE/FALSE result of the operation
*
* RETURN: Status
* FUNCTION: acpi_ex_link_mutex
*
* PARAMETERS: obj_desc - The mutex to be linked
- * Thread - Current executing thread object
+ * thread - Current executing thread object
*
* RETURN: None
*
*
* FUNCTION: acpi_ex_acquire_mutex_object
*
- * PARAMETERS: Timeout - Timeout in milliseconds
+ * PARAMETERS: timeout - Timeout in milliseconds
* obj_desc - Mutex object
* thread_id - Current thread state
*
*
* FUNCTION: acpi_ex_release_all_mutexes
*
- * PARAMETERS: Thread - Current executing thread object
+ * PARAMETERS: thread - Current executing thread object
*
* RETURN: Status
*
*
* FUNCTION: acpi_ex_prep_field_value
*
- * PARAMETERS: Info - Contains all field creation info
+ * PARAMETERS: info - Contains all field creation info
*
* RETURN: Status
*
- * DESCRIPTION: Construct a union acpi_operand_object of type def_field and
- * connect it to the parent Node.
+ * DESCRIPTION: Construct an object of type union acpi_operand_object with a
+ * subtype of def_field and connect it to the parent Node.
*
******************************************************************************/
*
* FUNCTION: acpi_ex_system_memory_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* FUNCTION: acpi_ex_system_io_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* FUNCTION: acpi_ex_pci_config_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
* pci_function is the PCI device function number
* pci_register is the Config space register range 0-255 bytes
*
- * Value - input value for write, output address for read
+ * value - input value for write, output address for read
*
*/
pci_id = (struct acpi_pci_id *)region_context;
*
* FUNCTION: acpi_ex_cmos_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* FUNCTION: acpi_ex_pci_bar_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
*
* FUNCTION: acpi_ex_data_table_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
stack_desc = *stack_ptr;
- /* This is a union acpi_operand_object */
+ /* This is an object of type union acpi_operand_object */
switch (stack_desc->common.type) {
case ACPI_TYPE_LOCAL_REFERENCE:
* FUNCTION: acpi_ex_resolve_multiple
*
* PARAMETERS: walk_state - Current state (contains AML opcode)
- * Operand - Starting point for resolution
+ * operand - Starting point for resolution
* return_type - Where the object type is returned
* return_desc - Where the resolved object is returned
*
*
* FUNCTION: acpi_ex_resolve_operands
*
- * PARAMETERS: Opcode - Opcode being interpreted
+ * PARAMETERS: opcode - Opcode being interpreted
* stack_ptr - Pointer to the operand stack to be
* resolved
* walk_state - Current state
case ARGI_DEVICE_REF:
case ARGI_TARGETREF: /* Allows implicit conversion rules before store */
case ARGI_FIXED_TARGET: /* No implicit conversion before store to target */
- case ARGI_SIMPLE_TARGET: /* Name, Local, or Arg - no implicit conversion */
+ case ARGI_SIMPLE_TARGET: /* Name, Local, or arg - no implicit conversion */
/*
* Need an operand of type ACPI_TYPE_LOCAL_REFERENCE
/*
* Need an operand of type ACPI_TYPE_INTEGER,
* But we can implicitly convert from a STRING or BUFFER
- * Aka - "Implicit Source Operand Conversion"
+ * aka - "Implicit Source Operand Conversion"
*/
status =
acpi_ex_convert_to_integer(obj_desc, stack_ptr, 16);
/*
* Need an operand of type ACPI_TYPE_BUFFER,
* But we can implicitly convert from a STRING or INTEGER
- * Aka - "Implicit Source Operand Conversion"
+ * aka - "Implicit Source Operand Conversion"
*/
status = acpi_ex_convert_to_buffer(obj_desc, stack_ptr);
if (ACPI_FAILURE(status)) {
/*
* Need an operand of type ACPI_TYPE_STRING,
* But we can implicitly convert from a BUFFER or INTEGER
- * Aka - "Implicit Source Operand Conversion"
+ * aka - "Implicit Source Operand Conversion"
*/
status = acpi_ex_convert_to_string(obj_desc, stack_ptr,
ACPI_IMPLICIT_CONVERT_HEX);
* FUNCTION: acpi_ex_store
*
* PARAMETERS: *source_desc - Value to be stored
- * *dest_desc - Where to store it. Must be an NS node
- * or a union acpi_operand_object of type
+ * *dest_desc - Where to store it. Must be an NS node
+ * or union acpi_operand_object of type
* Reference;
* walk_state - Current walk state
*
* FUNCTION: acpi_ex_store_object_to_node
*
* PARAMETERS: source_desc - Value to be stored
- * Node - Named object to receive the value
+ * node - Named object to receive the value
* walk_state - Current walk state
* implicit_conversion - Perform implicit conversion (yes/no)
*
* NOTE: ACPI versions up to 3.0 specified that the buffer must be
* truncated if the string is smaller than the buffer. However, "other"
* implementations of ACPI never did this and thus became the defacto
- * standard. ACPI 3.0_a changes this behavior such that the buffer
+ * standard. ACPI 3.0A changes this behavior such that the buffer
* is no longer truncated.
*/
*
* FUNCTION: acpi_ex_system_wait_semaphore
*
- * PARAMETERS: Semaphore - Semaphore to wait on
- * Timeout - Max time to wait
+ * PARAMETERS: semaphore - Semaphore to wait on
+ * timeout - Max time to wait
*
* RETURN: Status
*
*
* FUNCTION: acpi_ex_system_wait_mutex
*
- * PARAMETERS: Mutex - Mutex to wait on
- * Timeout - Max time to wait
+ * PARAMETERS: mutex - Mutex to wait on
+ * timeout - Max time to wait
*
* RETURN: Status
*
*
* DESCRIPTION: Reacquire the interpreter execution region from within the
* interpreter code. Failure to enter the interpreter region is a
- * fatal system error. Used in conjunction with
+ * fatal system error. Used in conjunction with
* relinquish_interpreter
*
******************************************************************************/
*
* FUNCTION: acpi_ex_digits_needed
*
- * PARAMETERS: Value - Value to be represented
- * Base - Base of representation
+ * PARAMETERS: value - Value to be represented
+ * base - Base of representation
*
* RETURN: The number of digits.
*
* PARAMETERS: out_string - Where to put the converted string. At least
* 21 bytes are needed to hold the largest
* possible 64-bit integer.
- * Value - Value to be converted
+ * value - Value to be converted
*
* RETURN: None, string
*
*
* RETURN: TRUE if valid/supported ID.
*
- * DESCRIPTION: Validate an operation region space_iD.
+ * DESCRIPTION: Validate an operation region space_ID.
*
******************************************************************************/
*
* FUNCTION: acpi_hw_set_mode
*
- * PARAMETERS: Mode - SYS_MODE_ACPI or SYS_MODE_LEGACY
+ * PARAMETERS: mode - SYS_MODE_ACPI or SYS_MODE_LEGACY
*
* RETURN: Status
*
* FUNCTION: acpi_hw_extended_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * Flags - ACPI_EXECUTE_GTS to run optional method
+ * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
/* Clear wake status (WAK_STS) */
- status = acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
+ status =
+ acpi_write((u64)ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
- status = acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
+ status = acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE),
&acpi_gbl_FADT.sleep_control);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
* FUNCTION: acpi_hw_extended_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - ACPI_EXECUTE_BFS to run optional method
+ * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
((acpi_gbl_sleep_type_a << ACPI_X_SLEEP_TYPE_POSITION) &
ACPI_X_SLEEP_TYPE_MASK);
- (void)acpi_write((sleep_type_value | ACPI_X_SLEEP_ENABLE),
+ (void)acpi_write((u64)(sleep_type_value | ACPI_X_SLEEP_ENABLE),
&acpi_gbl_FADT.sleep_control);
}
* FUNCTION: acpi_hw_extended_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - Reserved, set to zero
+ * flags - Reserved, set to zero
*
* RETURN: Status
*
* and use it to determine whether the system is rebooting or
* resuming. Clear WAK_STS for compatibility.
*/
- (void)acpi_write(ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
+ (void)acpi_write((u64)ACPI_X_WAKE_STATUS, &acpi_gbl_FADT.sleep_status);
acpi_gbl_system_awake_and_running = TRUE;
acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
*
* FUNCTION: acpi_hw_validate_register
*
- * PARAMETERS: Reg - GAS register structure
+ * PARAMETERS: reg - GAS register structure
* max_bit_width - Max bit_width supported (32 or 64)
- * Address - Pointer to where the gas->address
+ * address - Pointer to where the gas->address
* is returned
*
* RETURN: Status
return (AE_BAD_ADDRESS);
}
- /* Validate the space_iD */
+ /* Validate the space_ID */
if ((reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
(reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
*
* FUNCTION: acpi_hw_read
*
- * PARAMETERS: Value - Where the value is returned
- * Reg - GAS register structure
+ * PARAMETERS: value - Where the value is returned
+ * reg - GAS register structure
*
* RETURN: Status
*
*
* LIMITATIONS: <These limitations also apply to acpi_hw_write>
* bit_width must be exactly 8, 16, or 32.
- * space_iD must be system_memory or system_iO.
+ * space_ID must be system_memory or system_IO.
* bit_offset and access_width are currently ignored, as there has
* not been a need to implement these.
*
*
* FUNCTION: acpi_hw_write
*
- * PARAMETERS: Value - Value to be written
- * Reg - GAS register structure
+ * PARAMETERS: value - Value to be written
+ * reg - GAS register structure
*
* RETURN: Status
*
* FUNCTION: acpi_hw_register_write
*
* PARAMETERS: register_id - ACPI Register ID
- * Value - The value to write
+ * value - The value to write
*
* RETURN: Status
*
*
* FUNCTION: acpi_hw_read_multiple
*
- * PARAMETERS: Value - Where the register value is returned
+ * PARAMETERS: value - Where the register value is returned
* register_a - First ACPI register (required)
* register_b - Second ACPI register (optional)
*
*
* FUNCTION: acpi_hw_write_multiple
*
- * PARAMETERS: Value - The value to write
+ * PARAMETERS: value - The value to write
* register_a - First ACPI register (required)
* register_b - Second ACPI register (optional)
*
* FUNCTION: acpi_hw_legacy_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * Flags - ACPI_EXECUTE_GTS to run optional method
+ * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
* FUNCTION: acpi_hw_legacy_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - ACPI_EXECUTE_BFS to run optional method
+ * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
* FUNCTION: acpi_hw_legacy_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - Reserved, set to zero
+ * flags - Reserved, set to zero
*
* RETURN: Status
*
*
* FUNCTION: acpi_get_timer_resolution
*
- * PARAMETERS: Resolution - Where the resolution is returned
+ * PARAMETERS: resolution - Where the resolution is returned
*
* RETURN: Status and timer resolution
*
*
* FUNCTION: acpi_get_timer
*
- * PARAMETERS: Ticks - Where the timer value is returned
+ * PARAMETERS: ticks - Where the timer value is returned
*
* RETURN: Status and current timer value (ticks)
*
*
* The table is used to implement the Microsoft port access rules that
* first appeared in Windows XP. Some ports are always illegal, and some
- * ports are only illegal if the BIOS calls _OSI with a win_xP string or
+ * ports are only illegal if the BIOS calls _OSI with a win_XP string or
* later (meaning that the BIOS itelf is post-XP.)
*
* This provides ACPICA with the desired port protections and
*
* Description of port entries:
* DMA: DMA controller
- * PIC0: Programmable Interrupt Controller (8259_a)
+ * PIC0: Programmable Interrupt Controller (8259A)
* PIT1: System Timer 1
* PIT2: System Timer 2 failsafe
* RTC: Real-time clock
*
* FUNCTION: acpi_read
*
- * PARAMETERS: Value - Where the value is returned
- * Reg - GAS register structure
+ * PARAMETERS: value - Where the value is returned
+ * reg - GAS register structure
*
* RETURN: Status
*
*
* LIMITATIONS: <These limitations also apply to acpi_write>
* bit_width must be exactly 8, 16, 32, or 64.
- * space_iD must be system_memory or system_iO.
+ * space_ID must be system_memory or system_IO.
* bit_offset and access_width are currently ignored, as there has
* not been a need to implement these.
*
*
* FUNCTION: acpi_write
*
- * PARAMETERS: Value - Value to be written
- * Reg - GAS register structure
+ * PARAMETERS: value - Value to be written
+ * reg - GAS register structure
*
* RETURN: Status
*
* *sleep_type_a - Where SLP_TYPa is returned
* *sleep_type_b - Where SLP_TYPb is returned
*
- * RETURN: Status - ACPI status
+ * RETURN: status - ACPI status
*
* DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep
* state.
ACPI_FLUSH_CPU_CACHE();
status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
- (u32)acpi_gbl_FADT.S4bios_request, 8);
+ (u32)acpi_gbl_FADT.s4_bios_request, 8);
do {
acpi_os_stall(1000);
* FUNCTION: acpi_enter_sleep_state
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * Flags - ACPI_EXECUTE_GTS to run optional method
+ * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
* FUNCTION: acpi_leave_sleep_state_prep
*
* PARAMETERS: sleep_state - Which sleep state we are exiting
- * Flags - ACPI_EXECUTE_BFS to run optional method
+ * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
#if defined (ACPI_ASL_COMPILER)
- /* Save the parameter count for the i_aSL compiler */
+ /* Save the parameter count for the iASL compiler */
new_node->value = obj_desc->method.param_count;
#else
* FUNCTION: acpi_ns_lookup
*
* PARAMETERS: scope_info - Current scope info block
- * Pathname - Search pathname, in internal format
+ * pathname - Search pathname, in internal format
* (as represented in the AML stream)
- * Type - Type associated with name
+ * type - Type associated with name
* interpreter_mode - IMODE_LOAD_PASS2 => add name if not found
- * Flags - Flags describing the search restrictions
+ * flags - Flags describing the search restrictions
* walk_state - Current state of the walk
* return_node - Where the Node is placed (if found
* or created successfully)
*
* FUNCTION: acpi_ns_create_node
*
- * PARAMETERS: Name - Name of the new node (4 char ACPI name)
+ * PARAMETERS: name - Name of the new node (4 char ACPI name)
*
* RETURN: New namespace node (Null on failure)
*
*
* FUNCTION: acpi_ns_delete_node
*
- * PARAMETERS: Node - Node to be deleted
+ * PARAMETERS: node - Node to be deleted
*
* RETURN: None
*
*
* FUNCTION: acpi_ns_remove_node
*
- * PARAMETERS: Node - Node to be removed/deleted
+ * PARAMETERS: node - Node to be removed/deleted
*
* RETURN: None
*
*
* PARAMETERS: walk_state - Current state of the walk
* parent_node - The parent of the new Node
- * Node - The new Node to install
- * Type - ACPI object type of the new Node
+ * node - The new Node to install
+ * type - ACPI object type of the new Node
*
* RETURN: None
*
* FUNCTION: acpi_ns_print_pathname
*
* PARAMETERS: num_segments - Number of ACPI name segments
- * Pathname - The compressed (internal) path
+ * pathname - The compressed (internal) path
*
* RETURN: None
*
*
* FUNCTION: acpi_ns_dump_pathname
*
- * PARAMETERS: Handle - Object
- * Msg - Prefix message
- * Level - Desired debug level
- * Component - Caller's component ID
+ * PARAMETERS: handle - Object
+ * msg - Prefix message
+ * level - Desired debug level
+ * component - Caller's component ID
*
* RETURN: None
*
* FUNCTION: acpi_ns_dump_one_object
*
* PARAMETERS: obj_handle - Node to be dumped
- * Level - Nesting level of the handle
- * Context - Passed into walk_namespace
+ * level - Nesting level of the handle
+ * context - Passed into walk_namespace
* return_value - Not used
*
* RETURN: Status
*
* FUNCTION: acpi_ns_dump_objects
*
- * PARAMETERS: Type - Object type to be dumped
+ * PARAMETERS: type - Object type to be dumped
* display_type - 0 or ACPI_DISPLAY_SUMMARY
* max_depth - Maximum depth of dump. Use ACPI_UINT32_MAX
* for an effectively unlimited depth.
*
* FUNCTION: acpi_ns_dump_entry
*
- * PARAMETERS: Handle - Node to be dumped
+ * PARAMETERS: handle - Node to be dumped
* debug_level - Output level
*
* RETURN: None
*
* FUNCTION: acpi_ns_dump_one_device
*
- * PARAMETERS: Handle - Node to be dumped
- * Level - Nesting level of the handle
- * Context - Passed into walk_namespace
+ * PARAMETERS: handle - Node to be dumped
+ * level - Nesting level of the handle
+ * context - Passed into walk_namespace
* return_value - Not used
*
* RETURN: Status
*
* FUNCTION: acpi_ns_evaluate
*
- * PARAMETERS: Info - Evaluation info block, contains:
+ * PARAMETERS: info - Evaluation info block, contains:
* prefix_node - Prefix or Method/Object Node to execute
- * Pathname - Name of method to execute, If NULL, the
+ * pathname - Name of method to execute, If NULL, the
* Node is the object to execute
- * Parameters - List of parameters to pass to the method,
+ * parameters - List of parameters to pass to the method,
* terminated by NULL. Params itself may be
* NULL if no parameters are being passed.
* return_object - Where to put method's return value (if
* parameter_type - Type of Parameter list
* return_object - Where to put method's return value (if
* any). If NULL, no value is returned.
- * Flags - ACPI_IGNORE_RETURN_VALUE to delete return
+ * flags - ACPI_IGNORE_RETURN_VALUE to delete return
*
* RETURN: Status
*
* FUNCTION: acpi_ns_exec_module_code
*
* PARAMETERS: method_obj - Object container for the module-level code
- * Info - Info block for method evaluation
+ * info - Info block for method evaluation
*
* RETURN: None. Exceptions during method execution are ignored, since
* we cannot abort a table load.
* FUNCTION: acpi_ns_init_one_object
*
* PARAMETERS: obj_handle - Node
- * Level - Current nesting level
- * Context - Points to a init info struct
+ * level - Current nesting level
+ * context - Points to a init info struct
* return_value - Not used
*
* RETURN: Status
* we will not run _INI, but we continue to examine the children
* of this device.
*
- * From the ACPI spec, description of _STA: (Note - no mention
+ * From the ACPI spec, description of _STA: (note - no mention
* of whether to run _INI or not on the device in question)
*
* "_STA may return bit 0 clear (not present) with bit 3 set
* FUNCTION: acpi_ns_load_table
*
* PARAMETERS: table_index - Index for table to be loaded
- * Node - Owning NS node
+ * node - Owning NS node
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_unload_name_space
*
- * PARAMETERS: Handle - Root of namespace subtree to be deleted
+ * PARAMETERS: handle - Root of namespace subtree to be deleted
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_build_external_path
*
- * PARAMETERS: Node - NS node whose pathname is needed
- * Size - Size of the pathname
+ * PARAMETERS: node - NS node whose pathname is needed
+ * size - Size of the pathname
* *name_buffer - Where to return the pathname
*
* RETURN: Status
*
* FUNCTION: acpi_ns_get_external_pathname
*
- * PARAMETERS: Node - Namespace node whose pathname is needed
+ * PARAMETERS: node - Namespace node whose pathname is needed
*
* RETURN: Pointer to storage containing the fully qualified name of
* the node, In external format (name segments separated by path
*
* FUNCTION: acpi_ns_get_pathname_length
*
- * PARAMETERS: Node - Namespace node
+ * PARAMETERS: node - Namespace node
*
* RETURN: Length of path, including prefix
*
*
* PARAMETERS: target_handle - Handle of named object whose name is
* to be found
- * Buffer - Where the pathname is returned
+ * buffer - Where the pathname is returned
*
* RETURN: Status, Buffer is filled with pathname if status is AE_OK
*
*
* FUNCTION: acpi_ns_attach_object
*
- * PARAMETERS: Node - Parent Node
- * Object - Object to be attached
- * Type - Type of object, or ACPI_TYPE_ANY if not
+ * PARAMETERS: node - Parent Node
+ * object - Object to be attached
+ * type - Type of object, or ACPI_TYPE_ANY if not
* known
*
* RETURN: Status
*
* FUNCTION: acpi_ns_detach_object
*
- * PARAMETERS: Node - A Namespace node whose object will be detached
+ * PARAMETERS: node - A Namespace node whose object will be detached
*
* RETURN: None.
*
*
* FUNCTION: acpi_ns_get_attached_object
*
- * PARAMETERS: Node - Namespace node
+ * PARAMETERS: node - Namespace node
*
* RETURN: Current value of the object field from the Node whose
* handle is passed
*
* FUNCTION: acpi_ns_get_secondary_object
*
- * PARAMETERS: Node - Namespace node
+ * PARAMETERS: node - Namespace node
*
* RETURN: Current value of the object field from the Node whose
* handle is passed.
*
* FUNCTION: acpi_ns_attach_data
*
- * PARAMETERS: Node - Namespace node
- * Handler - Handler to be associated with the data
- * Data - Data to be attached
+ * PARAMETERS: node - Namespace node
+ * handler - Handler to be associated with the data
+ * data - Data to be attached
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_detach_data
*
- * PARAMETERS: Node - Namespace node
- * Handler - Handler associated with the data
+ * PARAMETERS: node - Namespace node
+ * handler - Handler associated with the data
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_get_attached_data
*
- * PARAMETERS: Node - Namespace node
- * Handler - Handler associated with the data
- * Data - Where the data is returned
+ * PARAMETERS: node - Namespace node
+ * handler - Handler associated with the data
+ * data - Where the data is returned
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_check_predefined_names
*
- * PARAMETERS: Node - Namespace node for the method/object
+ * PARAMETERS: node - Namespace node for the method/object
* user_param_count - Number of parameters actually passed
* return_status - Status from the object evaluation
* return_object_ptr - Pointer to the object returned from the
*
* FUNCTION: acpi_ns_check_parameter_count
*
- * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
- * Node - Namespace node for the method/object
+ * PARAMETERS: pathname - Full pathname to the node (for error msgs)
+ * node - Namespace node for the method/object
* user_param_count - Number of args passed in by the caller
- * Predefined - Pointer to entry in predefined name table
+ * predefined - Pointer to entry in predefined name table
*
* RETURN: None
*
*
* FUNCTION: acpi_ns_check_for_predefined_name
*
- * PARAMETERS: Node - Namespace node for the method/object
+ * PARAMETERS: node - Namespace node for the method/object
*
* RETURN: Pointer to entry in predefined table. NULL indicates not found.
*
*
* FUNCTION: acpi_ns_check_package
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_check_package_list
*
- * PARAMETERS: Data - Pointer to validation data structure
- * Package - Pointer to package-specific info for method
- * Elements - Element list of parent package. All elements
+ * PARAMETERS: data - Pointer to validation data structure
+ * package - Pointer to package-specific info for method
+ * elements - Element list of parent package. All elements
* of this list should be of type Package.
- * Count - Count of subpackages
+ * count - Count of subpackages
*
* RETURN: Status
*
*
* FUNCTION: acpi_ns_check_package_elements
*
- * PARAMETERS: Data - Pointer to validation data structure
- * Elements - Pointer to the package elements array
- * Type1 - Object type for first group
- * Count1 - Count for first group
- * Type2 - Object type for second group
- * Count2 - Count for second group
+ * PARAMETERS: data - Pointer to validation data structure
+ * elements - Pointer to the package elements array
+ * type1 - Object type for first group
+ * count1 - Count for first group
+ * type2 - Object type for second group
+ * count2 - Count for second group
* start_index - Start of the first group of elements
*
* RETURN: Status
*
* FUNCTION: acpi_ns_check_object_type
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
* expected_btypes - Bitmap of expected return type(s)
*
* FUNCTION: acpi_ns_check_reference
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object - Object returned from the evaluation of a
* method or object
*
*
* FUNCTION: acpi_ns_get_expected_types
*
- * PARAMETERS: Buffer - Pointer to where the string is returned
+ * PARAMETERS: buffer - Pointer to where the string is returned
* expected_btypes - Bitmap of expected return type(s)
*
* RETURN: Buffer is populated with type names.
*
* FUNCTION: acpi_ns_repair_object
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* expected_btypes - Object types expected
* package_index - Index of object within parent package (if
* applicable - ACPI_NOT_PACKAGE_ELEMENT
*
* FUNCTION: acpi_ns_repair_null_element
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* expected_btypes - Object types expected
* package_index - Index of object within parent package (if
* applicable - ACPI_NOT_PACKAGE_ELEMENT
*/
if (expected_btypes & ACPI_RTYPE_INTEGER) {
- /* Need an Integer - create a zero-value integer */
+ /* Need an integer - create a zero-value integer */
new_object = acpi_ut_create_integer_object((u64)0);
} else if (expected_btypes & ACPI_RTYPE_STRING) {
- /* Need a String - create a NULL string */
+ /* Need a string - create a NULL string */
new_object = acpi_ut_create_string_object(0);
} else if (expected_btypes & ACPI_RTYPE_BUFFER) {
- /* Need a Buffer - create a zero-length buffer */
+ /* Need a buffer - create a zero-length buffer */
new_object = acpi_ut_create_buffer_object(0);
} else {
*
* FUNCTION: acpi_ns_remove_null_elements
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* package_type - An acpi_return_package_types value
* obj_desc - A Package object
*
*
* FUNCTION: acpi_ns_wrap_with_package
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* original_object - Pointer to the object to repair.
* obj_desc_ptr - The new package object is returned here
*
*
* FUNCTION: acpi_ns_complex_repairs
*
- * PARAMETERS: Data - Pointer to validation data structure
- * Node - Namespace node for the method/object
+ * PARAMETERS: data - Pointer to validation data structure
+ * node - Namespace node for the method/object
* validate_status - Original status of earlier validation
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
* FUNCTION: acpi_ns_match_repairable_name
*
- * PARAMETERS: Node - Namespace node for the method/object
+ * PARAMETERS: node - Namespace node for the method/object
*
* RETURN: Pointer to entry in repair table. NULL indicates not found.
*
*
* FUNCTION: acpi_ns_repair_ALR
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_FDE
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_CID
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_HID
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_TSS
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_repair_PSS
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
*
* FUNCTION: acpi_ns_check_sorted_list
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object - Pointer to the top-level returned object
* expected_count - Minimum length of each sub-package
* sort_index - Sub-package entry to sort on
*
* FUNCTION: acpi_ns_sort_list
*
- * PARAMETERS: Elements - Package object element list
- * Count - Element count for above
- * Index - Sort by which package element
+ * PARAMETERS: elements - Package object element list
+ * count - Element count for above
+ * index - Sort by which package element
* sort_direction - Ascending or Descending sort
*
* RETURN: None
*
* PARAMETERS: target_name - Ascii ACPI name to search for
* parent_node - Starting node where search will begin
- * Type - Object type to match
+ * type - Object type to match
* return_node - Where the matched Named obj is returned
*
* RETURN: Status
* FUNCTION: acpi_ns_search_parent_tree
*
* PARAMETERS: target_name - Ascii ACPI name to search for
- * Node - Starting node where search will begin
- * Type - Object type to match
+ * node - Starting node where search will begin
+ * type - Object type to match
* return_node - Where the matched Node is returned
*
* RETURN: Status
*
* PARAMETERS: target_name - Ascii ACPI name to search for (4 chars)
* walk_state - Current state of the walk
- * Node - Starting node where search will begin
+ * node - Starting node where search will begin
* interpreter_mode - Add names only in ACPI_MODE_LOAD_PASS_x.
* Otherwise,search only.
- * Type - Object type to match
- * Flags - Flags describing the search restrictions
+ * type - Object type to match
+ * flags - Flags describing the search restrictions
* return_node - Where the Node is returned
*
* RETURN: Status
*
* FUNCTION: acpi_ns_print_node_pathname
*
- * PARAMETERS: Node - Object
- * Message - Prefix message
+ * PARAMETERS: node - Object
+ * message - Prefix message
*
* DESCRIPTION: Print an object's full namespace pathname
* Manages allocation/freeing of a pathname buffer
*
* FUNCTION: acpi_ns_valid_root_prefix
*
- * PARAMETERS: Prefix - Character to be checked
+ * PARAMETERS: prefix - Character to be checked
*
* RETURN: TRUE if a valid prefix
*
*
* FUNCTION: acpi_ns_valid_path_separator
*
- * PARAMETERS: Sep - Character to be checked
+ * PARAMETERS: sep - Character to be checked
*
* RETURN: TRUE if a valid path separator
*
*
* FUNCTION: acpi_ns_get_type
*
- * PARAMETERS: Node - Parent Node to be examined
+ * PARAMETERS: node - Parent Node to be examined
*
* RETURN: Type field from Node whose handle is passed
*
*
* FUNCTION: acpi_ns_local
*
- * PARAMETERS: Type - A namespace object type
+ * PARAMETERS: type - A namespace object type
*
* RETURN: LOCAL if names must be found locally in objects of the
* passed type, 0 if enclosing scopes should be searched
*
* FUNCTION: acpi_ns_get_internal_name_length
*
- * PARAMETERS: Info - Info struct initialized with the
+ * PARAMETERS: info - Info struct initialized with the
* external name pointer.
*
* RETURN: None
*
* FUNCTION: acpi_ns_build_internal_name
*
- * PARAMETERS: Info - Info struct fully initialized
+ * PARAMETERS: info - Info struct fully initialized
*
* RETURN: Status
*
* FUNCTION: acpi_ns_internalize_name
*
* PARAMETERS: *external_name - External representation of name
- * **Converted Name - Where to return the resulting
+ * **Converted name - Where to return the resulting
* internal represention of the name
*
* RETURN: Status
*
* FUNCTION: acpi_ns_validate_handle
*
- * PARAMETERS: Handle - Handle to be validated and typecast to a
+ * PARAMETERS: handle - Handle to be validated and typecast to a
* namespace node.
*
* RETURN: A pointer to a namespace node
*
* FUNCTION: acpi_ns_opens_scope
*
- * PARAMETERS: Type - A valid namespace type
+ * PARAMETERS: type - A valid namespace type
*
* RETURN: NEWSCOPE if the passed type "opens a name scope" according
* to the ACPI specification, else 0
*
* FUNCTION: acpi_ns_get_node
*
- * PARAMETERS: *Pathname - Name to be found, in external (ASL) format. The
+ * PARAMETERS: *pathname - Name to be found, in external (ASL) format. The
* \ (backslash) and ^ (carat) prefixes, and the
* . (period) to separate segments are supported.
* prefix_node - Root of subtree to be searched, or NS_ALL for the
* root of the name space. If Name is fully
* qualified (first s8 is '\'), the passed value
* of Scope will not be accessed.
- * Flags - Used to indicate whether to perform upsearch or
+ * flags - Used to indicate whether to perform upsearch or
* not.
* return_node - Where the Node is returned
*
*
* FUNCTION: acpi_ns_get_next_node_typed
*
- * PARAMETERS: Type - Type of node to be searched for
+ * PARAMETERS: type - Type of node to be searched for
* parent_node - Parent node whose children we are
* getting
* child_node - Previous child that was found.
*
* FUNCTION: acpi_ns_walk_namespace
*
- * PARAMETERS: Type - acpi_object_type to search for
+ * PARAMETERS: type - acpi_object_type to search for
* start_node - Handle in namespace where search begins
* max_depth - Depth to which search is to reach
- * Flags - Whether to unlock the NS before invoking
+ * flags - Whether to unlock the NS before invoking
* the callback routine
* pre_order_visit - Called during tree pre-order visit
* when an object of "Type" is found
* post_order_visit - Called during tree post-order visit
* when an object of "Type" is found
- * Context - Passed to user function(s) above
+ * context - Passed to user function(s) above
* return_value - from the user_function if terminated
* early. Otherwise, returns NULL.
* RETURNS: Status
*
* FUNCTION: acpi_evaluate_object_typed
*
- * PARAMETERS: Handle - Object handle (optional)
- * Pathname - Object pathname (optional)
+ * PARAMETERS: handle - Object handle (optional)
+ * pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
* terminated by NULL. May be NULL
* if no parameters are being passed.
*
* FUNCTION: acpi_evaluate_object
*
- * PARAMETERS: Handle - Object handle (optional)
- * Pathname - Object pathname (optional)
+ * PARAMETERS: handle - Object handle (optional)
+ * pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
* terminated by NULL. May be NULL
* if no parameters are being passed.
*
* FUNCTION: acpi_ns_resolve_references
*
- * PARAMETERS: Info - Evaluation info block
+ * PARAMETERS: info - Evaluation info block
*
* RETURN: Info->return_object is replaced with the dereferenced object
*
*
* FUNCTION: acpi_walk_namespace
*
- * PARAMETERS: Type - acpi_object_type to search for
+ * PARAMETERS: type - acpi_object_type to search for
* start_object - Handle in namespace where search begins
* max_depth - Depth to which search is to reach
* pre_order_visit - Called during tree pre-order visit
* when an object of "Type" is found
* post_order_visit - Called during tree post-order visit
* when an object of "Type" is found
- * Context - Passed to user function(s) above
+ * context - Passed to user function(s) above
* return_value - Location where return value of
* user_function is put if terminated early
*
*
* PARAMETERS: HID - HID to search for. Can be NULL.
* user_function - Called when a matching object is found
- * Context - Passed to user function
+ * context - Passed to user function
* return_value - Location where return value of
* user_function is put if terminated early
*
* FUNCTION: acpi_attach_data
*
* PARAMETERS: obj_handle - Namespace node
- * Handler - Handler for this attachment
- * Data - Pointer to data to be attached
+ * handler - Handler for this attachment
+ * data - Pointer to data to be attached
*
* RETURN: Status
*
* FUNCTION: acpi_detach_data
*
* PARAMETERS: obj_handle - Namespace node handle
- * Handler - Handler used in call to acpi_attach_data
+ * handler - Handler used in call to acpi_attach_data
*
* RETURN: Status
*
* FUNCTION: acpi_get_data
*
* PARAMETERS: obj_handle - Namespace node
- * Handler - Handler used in call to attach_data
- * Data - Where the data is returned
+ * handler - Handler used in call to attach_data
+ * data - Where the data is returned
*
* RETURN: Status
*
*
* FUNCTION: acpi_get_handle
*
- * PARAMETERS: Parent - Object to search under (search scope).
- * Pathname - Pointer to an asciiz string containing the
+ * PARAMETERS: parent - Object to search under (search scope).
+ * pathname - Pointer to an asciiz string containing the
* name
* ret_handle - Where the return handle is returned
*
*
* FUNCTION: acpi_get_name
*
- * PARAMETERS: Handle - Handle to be converted to a pathname
+ * PARAMETERS: handle - Handle to be converted to a pathname
* name_type - Full pathname or single segment
- * Buffer - Buffer for returned path
+ * buffer - Buffer for returned path
*
* RETURN: Pointer to a string containing the fully qualified Name.
*
*
* FUNCTION: acpi_ns_copy_device_id
*
- * PARAMETERS: Dest - Pointer to the destination DEVICE_ID
- * Source - Pointer to the source DEVICE_ID
+ * PARAMETERS: dest - Pointer to the destination DEVICE_ID
+ * source - Pointer to the source DEVICE_ID
* string_area - Pointer to where to copy the dest string
*
* RETURN: Pointer to the next string area
*
* FUNCTION: acpi_get_object_info
*
- * PARAMETERS: Handle - Object Handle
+ * PARAMETERS: handle - Object Handle
* return_buffer - Where the info is returned
*
* RETURN: Status
*
* FUNCTION: acpi_install_method
*
- * PARAMETERS: Buffer - An ACPI table containing one control method
+ * PARAMETERS: buffer - An ACPI table containing one control method
*
* RETURN: Status
*
*
* FUNCTION: acpi_get_type
*
- * PARAMETERS: Handle - Handle of object whose type is desired
+ * PARAMETERS: handle - Handle of object whose type is desired
* ret_type - Where the type will be placed
*
* RETURN: Status
*
* FUNCTION: acpi_get_parent
*
- * PARAMETERS: Handle - Handle of object whose parent is desired
+ * PARAMETERS: handle - Handle of object whose parent is desired
* ret_handle - Where the parent handle will be placed
*
* RETURN: Status
*
* FUNCTION: acpi_get_next_object
*
- * PARAMETERS: Type - Type of object to be searched for
- * Parent - Parent object whose children we are getting
+ * PARAMETERS: type - Type of object to be searched for
+ * parent - Parent object whose children we are getting
* last_child - Previous child that was found.
* The NEXT child will be returned
* ret_handle - Where handle to the next object is placed
* FUNCTION: acpi_ps_get_next_namepath
*
* PARAMETERS: parser_state - Current parser state object
- * Arg - Where the namepath will be stored
+ * arg - Where the namepath will be stored
* arg_count - If the namepath points to a control method
* the method's argument is returned here.
* possible_method_call - Whether the namepath can possibly be the
*
* PARAMETERS: parser_state - Current parser state object
* arg_type - The argument type (AML_*_ARG)
- * Arg - Where the argument is returned
+ * arg - Where the argument is returned
*
* RETURN: None
*
arg = acpi_ps_alloc_op(AML_INT_BYTELIST_OP);
if (!arg) {
+ acpi_ps_free_op(field);
return_PTR(NULL);
}
} else {
arg = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP);
if (!arg) {
+ acpi_ps_free_op(field);
return_PTR(NULL);
}
* PARAMETERS: walk_state - Current state
* aml_op_start - Begin of named Op in AML
* unnamed_op - Early Op (not a named Op)
- * Op - Returned Op
+ * op - Returned Op
*
* RETURN: Status
*
if (walk_state->op_info->flags & AML_CREATE) {
/*
- * Backup to beginning of create_xXXfield declaration
+ * Backup to beginning of create_XXXfield declaration
* body_length is unknown until we parse the body
*/
op->named.data = aml_op_start;
*
* PARAMETERS: walk_state - Current state
* aml_op_start - Op start in AML
- * Op - Current Op
+ * op - Current Op
*
* RETURN: Status
*
* FUNCTION: acpi_ps_complete_op
*
* PARAMETERS: walk_state - Current state
- * Op - Returned Op
- * Status - Parse status before complete Op
+ * op - Returned Op
+ * status - Parse status before complete Op
*
* RETURN: Status
*
* FUNCTION: acpi_ps_complete_final_op
*
* PARAMETERS: walk_state - Current state
- * Op - Current Op
- * Status - Current parse status before complete last
+ * op - Current Op
+ * status - Current parse status before complete last
* Op
*
* RETURN: Status
if (walk_state->op_info->flags & AML_CREATE) {
/*
- * Backup to beginning of create_xXXfield declaration (1 for
+ * Backup to beginning of create_XXXfield declaration (1 for
* Opcode)
*
* body_length is unknown until we parse the body
*
* FUNCTION: acpi_ps_get_opcode_info
*
- * PARAMETERS: Opcode - The AML opcode
+ * PARAMETERS: opcode - The AML opcode
*
* RETURN: A pointer to the info about the opcode.
*
*
* FUNCTION: acpi_ps_get_opcode_name
*
- * PARAMETERS: Opcode - The AML opcode
+ * PARAMETERS: opcode - The AML opcode
*
* RETURN: A pointer to the name of the opcode (ASCII String)
* Note: Never returns NULL.
*
* FUNCTION: acpi_ps_get_opcode_size
*
- * PARAMETERS: Opcode - An AML opcode
+ * PARAMETERS: opcode - An AML opcode
*
* RETURN: Size of the opcode, in bytes (1 or 2)
*
* FUNCTION: acpi_ps_complete_this_op
*
* PARAMETERS: walk_state - Current State
- * Op - Op to complete
+ * op - Op to complete
*
* RETURN: Status
*
* FUNCTION: acpi_ps_next_parse_state
*
* PARAMETERS: walk_state - Current state
- * Op - Current parse op
+ * op - Current parse op
* callback_status - Status from previous operation
*
* RETURN: Status
* FUNCTION: acpi_ps_init_scope
*
* PARAMETERS: parser_state - Current parser state object
- * Root - the Root Node of this new scope
+ * root - the Root Node of this new scope
*
* RETURN: Status
*
* FUNCTION: acpi_ps_push_scope
*
* PARAMETERS: parser_state - Current parser state object
- * Op - Current op to be pushed
+ * op - Current op to be pushed
* remaining_args - List of args remaining
* arg_count - Fixed or variable number of args
*
* FUNCTION: acpi_ps_pop_scope
*
* PARAMETERS: parser_state - Current parser state object
- * Op - Where the popped op is returned
+ * op - Where the popped op is returned
* arg_list - Where the popped "next argument" is
* returned
* arg_count - Count of objects in arg_list
*
* FUNCTION: acpi_ps_get_arg
*
- * PARAMETERS: Op - Get an argument for this op
- * Argn - Nth argument to get
+ * PARAMETERS: op - Get an argument for this op
+ * argn - Nth argument to get
*
* RETURN: The argument (as an Op object). NULL if argument does not exist
*
*
* FUNCTION: acpi_ps_append_arg
*
- * PARAMETERS: Op - Append an argument to this Op.
- * Arg - Argument Op to append
+ * PARAMETERS: op - Append an argument to this Op.
+ * arg - Argument Op to append
*
* RETURN: None.
*
*
* FUNCTION: acpi_ps_get_depth_next
*
- * PARAMETERS: Origin - Root of subtree to search
- * Op - Last (previous) Op that was found
+ * PARAMETERS: origin - Root of subtree to search
+ * op - Last (previous) Op that was found
*
* RETURN: Next Op found in the search.
*
*
* FUNCTION: acpi_ps_get_child
*
- * PARAMETERS: Op - Get the child of this Op
+ * PARAMETERS: op - Get the child of this Op
*
* RETURN: Child Op, Null if none is found.
*
*
* FUNCTION: acpi_ps_init_op
*
- * PARAMETERS: Op - A newly allocated Op object
- * Opcode - Opcode to store in the Op
+ * PARAMETERS: op - A newly allocated Op object
+ * opcode - Opcode to store in the Op
*
* RETURN: None
*
*
* FUNCTION: acpi_ps_alloc_op
*
- * PARAMETERS: Opcode - Opcode that will be stored in the new Op
+ * PARAMETERS: opcode - Opcode that will be stored in the new Op
*
* RETURN: Pointer to the new Op, null on failure
*
*
* FUNCTION: acpi_ps_free_op
*
- * PARAMETERS: Op - Op to be freed
+ * PARAMETERS: op - Op to be freed
*
* RETURN: None.
*
* PARAMETERS: method_name - Valid ACPI name string
* debug_level - Optional level mask. 0 to use default
* debug_layer - Optional layer mask. 0 to use default
- * Flags - bit 1: one shot(1) or persistent(0)
+ * flags - bit 1: one shot(1) or persistent(0)
*
* RETURN: Status
*
*
* FUNCTION: acpi_ps_start_trace
*
- * PARAMETERS: Info - Method info struct
+ * PARAMETERS: info - Method info struct
*
* RETURN: None
*
*
* FUNCTION: acpi_ps_stop_trace
*
- * PARAMETERS: Info - Method info struct
+ * PARAMETERS: info - Method info struct
*
* RETURN: None
*
*
* FUNCTION: acpi_ps_execute_method
*
- * PARAMETERS: Info - Method info block, contains:
- * Node - Method Node to execute
+ * PARAMETERS: info - Method info block, contains:
+ * node - Method Node to execute
* obj_desc - Method object
- * Parameters - List of parameters to pass to the method,
+ * parameters - List of parameters to pass to the method,
* terminated by NULL. Params itself may be
* NULL if no parameters are being passed.
* return_object - Where to put method's return value (if
*
* FUNCTION: acpi_ps_update_parameter_list
*
- * PARAMETERS: Info - See struct acpi_evaluate_info
+ * PARAMETERS: info - See struct acpi_evaluate_info
* (Used: parameter_type and Parameters)
- * Action - Add or Remove reference
+ * action - Add or Remove reference
*
* RETURN: Status
*
/* Revision ID */
- {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.ext_address64.revision_iD),
- AML_OFFSET(ext_address64.revision_iD),
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.ext_address64.revision_ID),
+ AML_OFFSET(ext_address64.revision_ID),
1},
/*
* These fields are contiguous in both the source and destination:
AML_OFFSET(address.resource_type),
1},
- /* General Flags - Consume, Decode, min_fixed, max_fixed */
+ /* General flags - Consume, Decode, min_fixed, max_fixed */
{ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.producer_consumer),
AML_OFFSET(address.flags),
*
* FUNCTION: acpi_rs_get_address_common
*
- * PARAMETERS: Resource - Pointer to the internal resource struct
- * Aml - Pointer to the AML resource descriptor
+ * PARAMETERS: resource - Pointer to the internal resource struct
+ * aml - Pointer to the AML resource descriptor
*
* RETURN: TRUE if the resource_type field is OK, FALSE otherwise
*
*
* FUNCTION: acpi_rs_set_address_common
*
- * PARAMETERS: Aml - Pointer to the AML resource descriptor
- * Resource - Pointer to the internal resource struct
+ * PARAMETERS: aml - Pointer to the AML resource descriptor
+ * resource - Pointer to the internal resource struct
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_get_aml_length
*
- * PARAMETERS: Resource - Pointer to the resource linked list
+ * PARAMETERS: resource - Pointer to the resource linked list
* size_needed - Where the required size is returned
*
* RETURN: Status
*
* FUNCTION: acpi_rs_create_pci_routing_table
*
- * PARAMETERS: package_object - Pointer to a union acpi_operand_object
- * package
+ * PARAMETERS: package_object - Pointer to a package containing one
+ * of more ACPI_OPERAND_OBJECTs
* output_buffer - Pointer to the user's buffer
*
* RETURN: Status AE_OK if okay, else a valid acpi_status code.
* AE_BUFFER_OVERFLOW and output_buffer->Length will point
* to the size buffer needed.
*
- * DESCRIPTION: Takes the union acpi_operand_object package and creates a
+ * DESCRIPTION: Takes the union acpi_operand_object package and creates a
* linked list of PCI interrupt descriptions
*
* NOTE: It is the caller's responsibility to ensure that the start of the
*
* FUNCTION: acpi_rs_dump_address_common
*
- * PARAMETERS: Resource - Pointer to an internal resource descriptor
+ * PARAMETERS: resource - Pointer to an internal resource descriptor
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_out*
*
- * PARAMETERS: Title - Name of the resource field
- * Value - Value of the resource field
+ * PARAMETERS: title - Name of the resource field
+ * value - Value of the resource field
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_dump*List
*
- * PARAMETERS: Length - Number of elements in the list
- * Data - Start of the list
+ * PARAMETERS: length - Number of elements in the list
+ * data - Start of the list
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_convert_resources_to_aml
*
- * PARAMETERS: Resource - Pointer to the resource linked list
+ * PARAMETERS: resource - Pointer to the resource linked list
* aml_size_needed - Calculated size of the byte stream
* needed from calling acpi_rs_get_aml_length()
* The size of the output_buffer is
*
* FUNCTION: acpi_rs_convert_aml_to_resource
*
- * PARAMETERS: Resource - Pointer to the resource descriptor
- * Aml - Where the AML descriptor is returned
- * Info - Pointer to appropriate conversion table
+ * PARAMETERS: resource - Pointer to the resource descriptor
+ * aml - Where the AML descriptor is returned
+ * info - Pointer to appropriate conversion table
*
* RETURN: Status
*
case ACPI_RSC_EXIT_NE:
/*
- * Control - Exit conversion if not equal
+ * control - Exit conversion if not equal
*/
switch (info->resource_offset) {
case ACPI_RSC_COMPARE_AML_LENGTH:
*
* FUNCTION: acpi_rs_convert_resource_to_aml
*
- * PARAMETERS: Resource - Pointer to the resource descriptor
- * Aml - Where the AML descriptor is returned
- * Info - Pointer to appropriate conversion table
+ * PARAMETERS: resource - Pointer to the resource descriptor
+ * aml - Where the AML descriptor is returned
+ * info - Pointer to appropriate conversion table
*
* RETURN: Status
*
case ACPI_RSC_EXIT_LE:
/*
- * Control - Exit conversion if less than or equal
+ * control - Exit conversion if less than or equal
*/
if (item_count <= info->value) {
goto exit;
case ACPI_RSC_EXIT_NE:
/*
- * Control - Exit conversion if not equal
+ * control - Exit conversion if not equal
*/
switch (COMPARE_OPCODE(info)) {
case ACPI_RSC_COMPARE_VALUE:
case ACPI_RSC_EXIT_EQ:
/*
- * Control - Exit conversion if equal
+ * control - Exit conversion if equal
*/
if (*ACPI_ADD_PTR(u8, resource,
COMPARE_TARGET(info)) ==
#if 0
/* Previous resource validations */
-if (aml->ext_address64.revision_iD != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
+if (aml->ext_address64.revision_ID != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
return_ACPI_STATUS(AE_SUPPORT);
}
*
* FUNCTION: acpi_rs_decode_bitmask
*
- * PARAMETERS: Mask - Bitmask to decode
- * List - Where the converted list is returned
+ * PARAMETERS: mask - Bitmask to decode
+ * list - Where the converted list is returned
*
* RETURN: Count of bits set (length of list)
*
*
* FUNCTION: acpi_rs_encode_bitmask
*
- * PARAMETERS: List - List of values to encode
- * Count - Length of list
+ * PARAMETERS: list - List of values to encode
+ * count - Length of list
*
* RETURN: Encoded bitmask
*
*
* FUNCTION: acpi_rs_move_data
*
- * PARAMETERS: Destination - Pointer to the destination descriptor
- * Source - Pointer to the source descriptor
+ * PARAMETERS: destination - Pointer to the destination descriptor
+ * source - Pointer to the source descriptor
* item_count - How many items to move
* move_type - Byte width
*
*
* PARAMETERS: total_length - Length of the AML descriptor, including
* the header and length fields.
- * Aml - Pointer to the raw AML descriptor
+ * aml - Pointer to the raw AML descriptor
*
* RETURN: None
*
* PARAMETERS: descriptor_type - Byte to be inserted as the type
* total_length - Length of the AML descriptor, including
* the header and length fields.
- * Aml - Pointer to the raw AML descriptor
+ * aml - Pointer to the raw AML descriptor
*
* RETURN: None
*
*
* FUNCTION: acpi_rs_strcpy
*
- * PARAMETERS: Destination - Pointer to the destination string
- * Source - Pointer to the source string
+ * PARAMETERS: destination - Pointer to the destination string
+ * source - Pointer to the source string
*
* RETURN: String length, including NULL terminator
*
* minimum_length - Minimum length of the descriptor (minus
* any optional fields)
* resource_source - Where the resource_source is returned
- * Aml - Pointer to the raw AML descriptor
+ * aml - Pointer to the raw AML descriptor
* string_ptr - (optional) where to store the actual
* resource_source string
*
*
* FUNCTION: acpi_rs_set_resource_source
*
- * PARAMETERS: Aml - Pointer to the raw AML descriptor
+ * PARAMETERS: aml - Pointer to the raw AML descriptor
* minimum_length - Minimum length of the descriptor (minus
* any optional fields)
* resource_source - Internal resource_source
*
* FUNCTION: acpi_rs_get_prt_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
*
* FUNCTION: acpi_rs_get_crs_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
*/
status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
- /* On exit, we must delete the object returned by evaluate_object */
+ /* On exit, we must delete the object returned by evaluateObject */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_rs_get_prs_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
*/
status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
- /* On exit, we must delete the object returned by evaluate_object */
+ /* On exit, we must delete the object returned by evaluateObject */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_rs_get_aei_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
*/
status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
- /* On exit, we must delete the object returned by evaluate_object */
+ /* On exit, we must delete the object returned by evaluateObject */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_rs_get_method_data
*
- * PARAMETERS: Handle - Handle to the containing object
- * Path - Path to method, relative to Handle
+ * PARAMETERS: handle - Handle to the containing object
+ * path - Path to method, relative to Handle
* ret_buffer - Pointer to a buffer structure for the
* results
*
*
* FUNCTION: acpi_rs_set_srs_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* in_buffer - Pointer to a buffer structure of the
* parameter
*
* FUNCTION: acpi_rs_validate_parameters
*
* PARAMETERS: device_handle - Handle to a device
- * Buffer - Pointer to a data buffer
+ * buffer - Pointer to a data buffer
* return_node - Pointer to where the device node is returned
*
* RETURN: Status
*
* FUNCTION: acpi_resource_to_address64
*
- * PARAMETERS: Resource - Pointer to a resource
- * Out - Pointer to the users's return buffer
+ * PARAMETERS: resource - Pointer to a resource
+ * out - Pointer to the users's return buffer
* (a struct acpi_resource_address64)
*
* RETURN: Status
* FUNCTION: acpi_get_vendor_resource
*
* PARAMETERS: device_handle - Handle for the parent device object
- * Name - Method name for the parent resource
+ * name - Method name for the parent resource
* (METHOD_NAME__CRS or METHOD_NAME__PRS)
- * Uuid - Pointer to the UUID to be matched.
+ * uuid - Pointer to the UUID to be matched.
* includes both subtype and 16-byte UUID
* ret_buffer - Where the vendor resource is returned
*
*
* PARAMETERS: device_handle - Handle to the device object for the
* device we are querying
- * Name - Method name of the resources we want.
+ * name - Method name of the resources we want.
* (METHOD_NAME__CRS, METHOD_NAME__PRS, or
* METHOD_NAME__AEI)
* user_function - Called for each resource
- * Context - Passed to user_function
+ * context - Passed to user_function
*
* RETURN: Status
*
ACPI_MODULE_NAME("tbfadt")
/* Local prototypes */
-static ACPI_INLINE void
+static void
acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
- u8 space_id, u8 byte_width, u64 address);
+ u8 space_id,
+ u8 byte_width, u64 address, char *register_name);
static void acpi_tb_convert_fadt(void);
*
* PARAMETERS: generic_address - GAS struct to be initialized
* byte_width - Width of this register
- * Address - Address of the register
+ * address - Address of the register
*
* RETURN: None
*
*
******************************************************************************/
-static ACPI_INLINE void
+static void
acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
- u8 space_id, u8 byte_width, u64 address)
+ u8 space_id,
+ u8 byte_width, u64 address, char *register_name)
{
+ u8 bit_width;
+
+ /* Bit width field in the GAS is only one byte long, 255 max */
+
+ bit_width = (u8)(byte_width * 8);
+
+ if (byte_width > 31) { /* (31*8)=248 */
+ ACPI_ERROR((AE_INFO,
+ "%s - 32-bit FADT register is too long (%u bytes, %u bits) "
+ "to convert to GAS struct - 255 bits max, truncating",
+ register_name, byte_width, (byte_width * 8)));
+
+ bit_width = 255;
+ }
/*
* The 64-bit Address field is non-aligned in the byte packed
/* All other fields are byte-wide */
generic_address->space_id = space_id;
- generic_address->bit_width = (u8)ACPI_MUL_8(byte_width);
+ generic_address->bit_width = bit_width;
generic_address->bit_offset = 0;
generic_address->access_width = 0; /* Access width ANY */
}
*
* FUNCTION: acpi_tb_create_local_fadt
*
- * PARAMETERS: Table - Pointer to BIOS FADT
- * Length - Length of the table
+ * PARAMETERS: table - Pointer to BIOS FADT
+ * length - Length of the table
*
* RETURN: None
*
* a warning.
*/
if (length > sizeof(struct acpi_table_fadt)) {
- ACPI_WARNING((AE_INFO,
- "FADT (revision %u) is longer than ACPI 5.0 version, "
- "truncating length %u to %u",
- table->revision, length,
- (u32)sizeof(struct acpi_table_fadt)));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "FADT (revision %u) is longer than ACPI 5.0 version, "
+ "truncating length %u to %u",
+ table->revision, length,
+ (u32)sizeof(struct acpi_table_fadt)));
}
/* Clear the entire local FADT */
* they must match.
*/
if (address64->address && address32 &&
- (address64->address != (u64) address32)) {
- ACPI_ERROR((AE_INFO,
- "32/64X address mismatch in %s: 0x%8.8X/0x%8.8X%8.8X, using 32",
- fadt_info_table[i].name, address32,
- ACPI_FORMAT_UINT64(address64->address)));
+ (address64->address != (u64)address32)) {
+ ACPI_BIOS_ERROR((AE_INFO,
+ "32/64X address mismatch in FADT/%s: "
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
+ fadt_info_table[i].name, address32,
+ ACPI_FORMAT_UINT64(address64->
+ address)));
}
/* Always use 32-bit address if it is valid (non-null) */
&acpi_gbl_FADT,
fadt_info_table
[i].length),
- (u64) address32);
+ (u64) address32,
+ fadt_info_table[i].name);
}
}
}
*
* FUNCTION: acpi_tb_validate_fadt
*
- * PARAMETERS: Table - Pointer to the FADT to be validated
+ * PARAMETERS: table - Pointer to the FADT to be validated
*
* RETURN: None
*
* DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables.
*/
if (acpi_gbl_FADT.facs &&
- (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
- ACPI_WARNING((AE_INFO,
- "32/64X FACS address mismatch in FADT - "
- "0x%8.8X/0x%8.8X%8.8X, using 32",
- acpi_gbl_FADT.facs,
- ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
-
- acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
+ (acpi_gbl_FADT.Xfacs != (u64)acpi_gbl_FADT.facs)) {
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X FACS address mismatch in FADT - "
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
+ acpi_gbl_FADT.facs,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
+
+ acpi_gbl_FADT.Xfacs = (u64)acpi_gbl_FADT.facs;
}
if (acpi_gbl_FADT.dsdt &&
- (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
- ACPI_WARNING((AE_INFO,
- "32/64X DSDT address mismatch in FADT - "
- "0x%8.8X/0x%8.8X%8.8X, using 32",
- acpi_gbl_FADT.dsdt,
- ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
-
- acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
+ (acpi_gbl_FADT.Xdsdt != (u64)acpi_gbl_FADT.dsdt)) {
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X DSDT address mismatch in FADT - "
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
+ acpi_gbl_FADT.dsdt,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
+
+ acpi_gbl_FADT.Xdsdt = (u64)acpi_gbl_FADT.dsdt;
}
/* If Hardware Reduced flag is set, we are all done */
*/
if (address64->address &&
(address64->bit_width != ACPI_MUL_8(length))) {
- ACPI_WARNING((AE_INFO,
- "32/64X length mismatch in %s: %u/%u",
- name, ACPI_MUL_8(length),
- address64->bit_width));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X length mismatch in FADT/%s: %u/%u",
+ name, ACPI_MUL_8(length),
+ address64->bit_width));
}
if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) {
* Both the address and length must be non-zero.
*/
if (!address64->address || !length) {
- ACPI_ERROR((AE_INFO,
- "Required field %s has zero address and/or length:"
- " 0x%8.8X%8.8X/0x%X",
- name,
- ACPI_FORMAT_UINT64(address64->
- address),
- length));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Required FADT field %s has zero address and/or length: "
+ "0x%8.8X%8.8X/0x%X",
+ name,
+ ACPI_FORMAT_UINT64(address64->
+ address),
+ length));
}
} else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) {
/*
- * Field is optional (PM2Control, GPE0, GPE1) AND has its own
+ * Field is optional (Pm2_control, GPE0, GPE1) AND has its own
* length field. If present, both the address and length must
* be valid.
*/
if ((address64->address && !length) ||
(!address64->address && length)) {
- ACPI_WARNING((AE_INFO,
- "Optional field %s has zero address or length: "
- "0x%8.8X%8.8X/0x%X",
- name,
- ACPI_FORMAT_UINT64(address64->
- address),
- length));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "Optional FADT field %s has zero address or length: "
+ "0x%8.8X%8.8X/0x%X",
+ name,
+ ACPI_FORMAT_UINT64
+ (address64->address),
+ length));
}
}
}
(fadt_info_table[i].default_length > 0) &&
(fadt_info_table[i].default_length !=
target64->bit_width)) {
- ACPI_WARNING((AE_INFO,
- "Invalid length for %s: %u, using default %u",
- fadt_info_table[i].name,
- target64->bit_width,
- fadt_info_table[i].
- default_length));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "Invalid length for FADT/%s: %u, using default %u",
+ fadt_info_table[i].name,
+ target64->bit_width,
+ fadt_info_table[i].
+ default_length));
/* Incorrect size, set width to the default */
source64->address +
(fadt_pm_info_table[i].
register_num *
- pm1_register_byte_width));
+ pm1_register_byte_width),
+ "PmRegisters");
}
}
}
*
* FUNCTION: acpi_tb_find_table
*
- * PARAMETERS: Signature - String with ACPI table signature
+ * PARAMETERS: signature - String with ACPI table signature
* oem_id - String with the table OEM ID
* oem_table_id - String with the OEM Table ID
* table_index - Where the table index is returned
if ((table_desc->pointer->signature[0] != 0x00) &&
(!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT))
&& (ACPI_STRNCMP(table_desc->pointer->signature, "OEM", 3))) {
- ACPI_ERROR((AE_INFO,
- "Table has invalid signature [%4.4s] (0x%8.8X), must be SSDT or OEMx",
- acpi_ut_valid_acpi_name(*(u32 *)table_desc->
- pointer->
- signature) ? table_desc->
- pointer->signature : "????",
- *(u32 *)table_desc->pointer->signature));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Table has invalid signature [%4.4s] (0x%8.8X), "
+ "must be SSDT or OEMx",
+ acpi_ut_valid_acpi_name(*(u32 *)table_desc->
+ pointer->
+ signature) ?
+ table_desc->pointer->signature : "????",
+ *(u32 *)table_desc->pointer->signature));
return_ACPI_STATUS(AE_BAD_SIGNATURE);
}
*
* FUNCTION: acpi_tb_store_table
*
- * PARAMETERS: Address - Table address
- * Table - Table header
- * Length - Table length
- * Flags - flags
+ * PARAMETERS: address - Table address
+ * table - Table header
+ * length - Table length
+ * flags - flags
*
* RETURN: Status and table index.
*
*
* FUNCTION: acpi_tb_fix_string
*
- * PARAMETERS: String - String to be repaired
- * Length - Maximum length
+ * PARAMETERS: string - String to be repaired
+ * length - Maximum length
*
* RETURN: None
*
* FUNCTION: acpi_tb_cleanup_table_header
*
* PARAMETERS: out_header - Where the cleaned header is returned
- * Header - Input ACPI table header
+ * header - Input ACPI table header
*
* RETURN: Returns the cleaned header in out_header
*
*
* FUNCTION: acpi_tb_print_table_header
*
- * PARAMETERS: Address - Table physical address
- * Header - Table header
+ * PARAMETERS: address - Table physical address
+ * header - Table header
*
* RETURN: None
*
*
* FUNCTION: acpi_tb_validate_checksum
*
- * PARAMETERS: Table - ACPI table to verify
- * Length - Length of entire table
+ * PARAMETERS: table - ACPI table to verify
+ * length - Length of entire table
*
* RETURN: Status
*
/* Checksum ok? (should be zero) */
if (checksum) {
- ACPI_WARNING((AE_INFO,
- "Incorrect checksum in table [%4.4s] - 0x%2.2X, should be 0x%2.2X",
- table->signature, table->checksum,
- (u8) (table->checksum - checksum)));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "Incorrect checksum in table [%4.4s] - 0x%2.2X, "
+ "should be 0x%2.2X",
+ table->signature, table->checksum,
+ (u8)(table->checksum - checksum)));
#if (ACPI_CHECKSUM_ABORT)
*
* FUNCTION: acpi_tb_checksum
*
- * PARAMETERS: Buffer - Pointer to memory region to be checked
- * Length - Length of this memory region
+ * PARAMETERS: buffer - Pointer to memory region to be checked
+ * length - Length of this memory region
*
* RETURN: Checksum (u8)
*
if (acpi_gbl_original_dsdt_header.length != acpi_gbl_DSDT->length ||
acpi_gbl_original_dsdt_header.checksum != acpi_gbl_DSDT->checksum) {
- ACPI_ERROR((AE_INFO,
- "The DSDT has been corrupted or replaced - old, new headers below"));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "The DSDT has been corrupted or replaced - "
+ "old, new headers below"));
acpi_tb_print_table_header(0, &acpi_gbl_original_dsdt_header);
acpi_tb_print_table_header(0, acpi_gbl_DSDT);
*
* FUNCTION: acpi_tb_install_table
*
- * PARAMETERS: Address - Physical address of DSDT or FACS
- * Signature - Table signature, NULL if no need to
+ * PARAMETERS: address - Physical address of DSDT or FACS
+ * signature - Table signature, NULL if no need to
* match
* table_index - Index into root table array
*
/* If a particular signature is expected (DSDT/FACS), it must match */
if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) {
- ACPI_ERROR((AE_INFO,
- "Invalid signature 0x%X for ACPI table, expected [%s]",
- *ACPI_CAST_PTR(u32, table->signature), signature));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Invalid signature 0x%X for ACPI table, expected [%s]",
+ *ACPI_CAST_PTR(u32, table->signature),
+ signature));
goto unmap_and_exit;
}
/* Will truncate 64-bit address to 32 bits, issue warning */
- ACPI_WARNING((AE_INFO,
- "64-bit Physical Address in XSDT is too large (0x%8.8X%8.8X),"
- " truncating",
- ACPI_FORMAT_UINT64(address64)));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "64-bit Physical Address in XSDT is too large (0x%8.8X%8.8X),"
+ " truncating",
+ ACPI_FORMAT_UINT64(address64)));
}
#endif
return ((acpi_physical_address) (address64));
*
* FUNCTION: acpi_tb_parse_root_table
*
- * PARAMETERS: Rsdp - Pointer to the RSDP
+ * PARAMETERS: rsdp - Pointer to the RSDP
*
* RETURN: Status
*
acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
if (length < sizeof(struct acpi_table_header)) {
- ACPI_ERROR((AE_INFO, "Invalid length 0x%X in RSDT/XSDT",
- length));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Invalid table length 0x%X in RSDT/XSDT",
+ length));
return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
}
/******************************************************************************
*
- * Module Name: tbxface - Public interfaces to the ACPI subsystem
- * ACPI table oriented interfaces
+ * Module Name: tbxface - ACPI table oriented external interfaces
*
*****************************************************************************/
#define _COMPONENT ACPI_TABLES
ACPI_MODULE_NAME("tbxface")
-/* Local prototypes */
-static acpi_status acpi_tb_load_namespace(void);
-
-static int no_auto_ssdt;
-
/*******************************************************************************
*
* FUNCTION: acpi_allocate_root_table
*
* RETURN: Status
*
- * DESCRIPTION: Allocate a root table array. Used by i_aSL compiler and
+ * DESCRIPTION: Allocate a root table array. Used by iASL compiler and
* acpi_initialize_tables.
*
******************************************************************************/
-
acpi_status acpi_allocate_root_table(u32 initial_table_count)
{
return_ACPI_STATUS(AE_OK);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_load_table
- *
- * PARAMETERS: table_ptr - pointer to a buffer containing the entire
- * table to be loaded
- *
- * RETURN: Status
- *
- * DESCRIPTION: This function is called to load a table from the caller's
- * buffer. The buffer must contain an entire ACPI Table including
- * a valid header. The header fields will be verified, and if it
- * is determined that the table is invalid, the call will fail.
- *
- ******************************************************************************/
-acpi_status acpi_load_table(struct acpi_table_header *table_ptr)
-{
- acpi_status status;
- u32 table_index;
- struct acpi_table_desc table_desc;
-
- if (!table_ptr)
- return AE_BAD_PARAMETER;
-
- ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc));
- table_desc.pointer = table_ptr;
- table_desc.length = table_ptr->length;
- table_desc.flags = ACPI_TABLE_ORIGIN_UNKNOWN;
-
- /*
- * Install the new table into the local data structures
- */
- status = acpi_tb_add_table(&table_desc, &table_index);
- if (ACPI_FAILURE(status)) {
- return status;
- }
- status = acpi_ns_load_table(table_index, acpi_gbl_root_node);
- return status;
-}
-
-ACPI_EXPORT_SYMBOL(acpi_load_table)
-
/*******************************************************************************
*
* FUNCTION: acpi_get_table_header
*
- * PARAMETERS: Signature - ACPI signature of needed table
- * Instance - Which instance (for SSDTs)
+ * PARAMETERS: signature - ACPI signature of needed table
+ * instance - Which instance (for SSDTs)
* out_table_header - The pointer to the table header to fill
*
* RETURN: Status and pointer to mapped table header
*
* FUNCTION: acpi_get_table_with_size
*
- * PARAMETERS: Signature - ACPI signature of needed table
- * Instance - Which instance (for SSDTs)
+ * PARAMETERS: signature - ACPI signature of needed table
+ * instance - Which instance (for SSDTs)
* out_table - Where the pointer to the table is returned
*
* RETURN: Status and pointer to table
* FUNCTION: acpi_get_table_by_index
*
* PARAMETERS: table_index - Table index
- * Table - Where the pointer to the table is returned
+ * table - Where the pointer to the table is returned
*
* RETURN: Status and pointer to the table
*
ACPI_EXPORT_SYMBOL(acpi_get_table_by_index)
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_load_namespace
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
- * the RSDT/XSDT.
- *
- ******************************************************************************/
-static acpi_status acpi_tb_load_namespace(void)
-{
- acpi_status status;
- u32 i;
- struct acpi_table_header *new_dsdt;
-
- ACPI_FUNCTION_TRACE(tb_load_namespace);
-
- (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
-
- /*
- * Load the namespace. The DSDT is required, but any SSDT and
- * PSDT tables are optional. Verify the DSDT.
- */
- if (!acpi_gbl_root_table_list.current_table_count ||
- !ACPI_COMPARE_NAME(&
- (acpi_gbl_root_table_list.
- tables[ACPI_TABLE_INDEX_DSDT].signature),
- ACPI_SIG_DSDT)
- ||
- ACPI_FAILURE(acpi_tb_verify_table
- (&acpi_gbl_root_table_list.
- tables[ACPI_TABLE_INDEX_DSDT]))) {
- status = AE_NO_ACPI_TABLES;
- goto unlock_and_exit;
- }
-
- /*
- * Save the DSDT pointer for simple access. This is the mapped memory
- * address. We must take care here because the address of the .Tables
- * array can change dynamically as tables are loaded at run-time. Note:
- * .Pointer field is not validated until after call to acpi_tb_verify_table.
- */
- acpi_gbl_DSDT =
- acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer;
-
- /*
- * Optionally copy the entire DSDT to local memory (instead of simply
- * mapping it.) There are some BIOSs that corrupt or replace the original
- * DSDT, creating the need for this option. Default is FALSE, do not copy
- * the DSDT.
- */
- if (acpi_gbl_copy_dsdt_locally) {
- new_dsdt = acpi_tb_copy_dsdt(ACPI_TABLE_INDEX_DSDT);
- if (new_dsdt) {
- acpi_gbl_DSDT = new_dsdt;
- }
- }
-
- /*
- * Save the original DSDT header for detection of table corruption
- * and/or replacement of the DSDT from outside the OS.
- */
- ACPI_MEMCPY(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT,
- sizeof(struct acpi_table_header));
-
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
-
- /* Load and parse tables */
-
- status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */
-
- (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) {
- if ((!ACPI_COMPARE_NAME
- (&(acpi_gbl_root_table_list.tables[i].signature),
- ACPI_SIG_SSDT)
- &&
- !ACPI_COMPARE_NAME(&
- (acpi_gbl_root_table_list.tables[i].
- signature), ACPI_SIG_PSDT))
- ||
- ACPI_FAILURE(acpi_tb_verify_table
- (&acpi_gbl_root_table_list.tables[i]))) {
- continue;
- }
-
- if (no_auto_ssdt) {
- printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n");
- continue;
- }
-
- /* Ignore errors while loading tables, get as many as possible */
-
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
- (void)acpi_ns_load_table(i, acpi_gbl_root_node);
- (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n"));
-
- unlock_and_exit:
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_load_tables
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
- *
- ******************************************************************************/
-
-acpi_status acpi_load_tables(void)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(acpi_load_tables);
-
- /* Load the namespace from the tables */
-
- status = acpi_tb_load_namespace();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "While loading namespace from ACPI tables"));
- }
-
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_load_tables)
-
/*******************************************************************************
*
* FUNCTION: acpi_install_table_handler
*
- * PARAMETERS: Handler - Table event handler
- * Context - Value passed to the handler on each event
+ * PARAMETERS: handler - Table event handler
+ * context - Value passed to the handler on each event
*
* RETURN: Status
*
*
* FUNCTION: acpi_remove_table_handler
*
- * PARAMETERS: Handler - Table event handler that was installed
+ * PARAMETERS: handler - Table event handler that was installed
* previously.
*
* RETURN: Status
}
ACPI_EXPORT_SYMBOL(acpi_remove_table_handler)
-
-
-static int __init acpi_no_auto_ssdt_setup(char *s) {
-
- printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n");
-
- no_auto_ssdt = 1;
-
- return 1;
-}
-
-__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup);
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: tbxfload - Table load/unload external interfaces
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <linux/export.h>
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+#include "actables.h"
+
+#define _COMPONENT ACPI_TABLES
+ACPI_MODULE_NAME("tbxfload")
+
+/* Local prototypes */
+static acpi_status acpi_tb_load_namespace(void);
+
+static int no_auto_ssdt;
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_load_tables
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
+ *
+ ******************************************************************************/
+
+acpi_status acpi_load_tables(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_load_tables);
+
+ /* Load the namespace from the tables */
+
+ status = acpi_tb_load_namespace();
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While loading namespace from ACPI tables"));
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_load_tables)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_load_namespace
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
+ * the RSDT/XSDT.
+ *
+ ******************************************************************************/
+static acpi_status acpi_tb_load_namespace(void)
+{
+ acpi_status status;
+ u32 i;
+ struct acpi_table_header *new_dsdt;
+
+ ACPI_FUNCTION_TRACE(tb_load_namespace);
+
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+
+ /*
+ * Load the namespace. The DSDT is required, but any SSDT and
+ * PSDT tables are optional. Verify the DSDT.
+ */
+ if (!acpi_gbl_root_table_list.current_table_count ||
+ !ACPI_COMPARE_NAME(&
+ (acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT].signature),
+ ACPI_SIG_DSDT)
+ ||
+ ACPI_FAILURE(acpi_tb_verify_table
+ (&acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT]))) {
+ status = AE_NO_ACPI_TABLES;
+ goto unlock_and_exit;
+ }
+
+ /*
+ * Save the DSDT pointer for simple access. This is the mapped memory
+ * address. We must take care here because the address of the .Tables
+ * array can change dynamically as tables are loaded at run-time. Note:
+ * .Pointer field is not validated until after call to acpi_tb_verify_table.
+ */
+ acpi_gbl_DSDT =
+ acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer;
+
+ /*
+ * Optionally copy the entire DSDT to local memory (instead of simply
+ * mapping it.) There are some BIOSs that corrupt or replace the original
+ * DSDT, creating the need for this option. Default is FALSE, do not copy
+ * the DSDT.
+ */
+ if (acpi_gbl_copy_dsdt_locally) {
+ new_dsdt = acpi_tb_copy_dsdt(ACPI_TABLE_INDEX_DSDT);
+ if (new_dsdt) {
+ acpi_gbl_DSDT = new_dsdt;
+ }
+ }
+
+ /*
+ * Save the original DSDT header for detection of table corruption
+ * and/or replacement of the DSDT from outside the OS.
+ */
+ ACPI_MEMCPY(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT,
+ sizeof(struct acpi_table_header));
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+
+ /* Load and parse tables */
+
+ status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */
+
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) {
+ if ((!ACPI_COMPARE_NAME
+ (&(acpi_gbl_root_table_list.tables[i].signature),
+ ACPI_SIG_SSDT)
+ &&
+ !ACPI_COMPARE_NAME(&
+ (acpi_gbl_root_table_list.tables[i].
+ signature), ACPI_SIG_PSDT))
+ ||
+ ACPI_FAILURE(acpi_tb_verify_table
+ (&acpi_gbl_root_table_list.tables[i]))) {
+ continue;
+ }
+
+ if (no_auto_ssdt) {
+ printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n");
+ continue;
+ }
+
+ /* Ignore errors while loading tables, get as many as possible */
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ (void)acpi_ns_load_table(i, acpi_gbl_root_node);
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n"));
+
+ unlock_and_exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_load_table
+ *
+ * PARAMETERS: table - Pointer to a buffer containing the ACPI
+ * table to be loaded.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
+ * be a valid ACPI table with a valid ACPI table header.
+ * Note1: Mainly intended to support hotplug addition of SSDTs.
+ * Note2: Does not copy the incoming table. User is reponsible
+ * to ensure that the table is not deleted or unmapped.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_load_table(struct acpi_table_header *table)
+{
+ acpi_status status;
+ struct acpi_table_desc table_desc;
+ u32 table_index;
+
+ ACPI_FUNCTION_TRACE(acpi_load_table);
+
+ /* Parameter validation */
+
+ if (!table) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Init local table descriptor */
+
+ ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc));
+ table_desc.address = ACPI_PTR_TO_PHYSADDR(table);
+ table_desc.pointer = table;
+ table_desc.length = table->length;
+ table_desc.flags = ACPI_TABLE_ORIGIN_UNKNOWN;
+
+ /* Must acquire the interpreter lock during this operation */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Install the table and load it into the namespace */
+
+ ACPI_INFO((AE_INFO, "Host-directed Dynamic ACPI Table Load:"));
+ status = acpi_tb_add_table(&table_desc, &table_index);
+ if (ACPI_FAILURE(status)) {
+ goto unlock_and_exit;
+ }
+
+ status = acpi_ns_load_table(table_index, acpi_gbl_root_node);
+
+ /* Invoke table handler if present */
+
+ if (acpi_gbl_table_handler) {
+ (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_LOAD, table,
+ acpi_gbl_table_handler_context);
+ }
+
+ unlock_and_exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_load_table)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_unload_parent_table
+ *
+ * PARAMETERS: object - Handle to any namespace object owned by
+ * the table to be unloaded
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads
+ * the table and deletes all namespace objects associated with
+ * that table. Unloading of the DSDT is not allowed.
+ * Note: Mainly intended to support hotplug removal of SSDTs.
+ *
+ ******************************************************************************/
+acpi_status acpi_unload_parent_table(acpi_handle object)
+{
+ struct acpi_namespace_node *node =
+ ACPI_CAST_PTR(struct acpi_namespace_node, object);
+ acpi_status status = AE_NOT_EXIST;
+ acpi_owner_id owner_id;
+ u32 i;
+
+ ACPI_FUNCTION_TRACE(acpi_unload_parent_table);
+
+ /* Parameter validation */
+
+ if (!object) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /*
+ * The node owner_id is currently the same as the parent table ID.
+ * However, this could change in the future.
+ */
+ owner_id = node->owner_id;
+ if (!owner_id) {
+
+ /* owner_id==0 means DSDT is the owner. DSDT cannot be unloaded */
+
+ return_ACPI_STATUS(AE_TYPE);
+ }
+
+ /* Must acquire the interpreter lock during this operation */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Find the table in the global table list */
+
+ for (i = 0; i < acpi_gbl_root_table_list.current_table_count; i++) {
+ if (owner_id != acpi_gbl_root_table_list.tables[i].owner_id) {
+ continue;
+ }
+
+ /*
+ * Allow unload of SSDT and OEMx tables only. Do not allow unload
+ * of the DSDT. No other types of tables should get here, since
+ * only these types can contain AML and thus are the only types
+ * that can create namespace objects.
+ */
+ if (ACPI_COMPARE_NAME
+ (acpi_gbl_root_table_list.tables[i].signature.ascii,
+ ACPI_SIG_DSDT)) {
+ status = AE_TYPE;
+ break;
+ }
+
+ /* Ensure the table is actually loaded */
+
+ if (!acpi_tb_is_table_loaded(i)) {
+ status = AE_NOT_EXIST;
+ break;
+ }
+
+ /* Invoke table handler if present */
+
+ if (acpi_gbl_table_handler) {
+ (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_UNLOAD,
+ acpi_gbl_root_table_list.
+ tables[i].pointer,
+ acpi_gbl_table_handler_context);
+ }
+
+ /*
+ * Delete all namespace objects owned by this table. Note that
+ * these objects can appear anywhere in the namespace by virtue
+ * of the AML "Scope" operator. Thus, we need to track ownership
+ * by an ID, not simply a position within the hierarchy.
+ */
+ status = acpi_tb_delete_namespace_by_owner(i);
+ if (ACPI_FAILURE(status)) {
+ break;
+ }
+
+ status = acpi_tb_release_owner_id(i);
+ acpi_tb_set_table_loaded_flag(i, FALSE);
+ break;
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_unload_parent_table)
+
+static int __init acpi_no_auto_ssdt_setup(char *s) {
+
+ printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n");
+
+ no_auto_ssdt = 1;
+
+ return 1;
+}
+
+__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup);
*
* FUNCTION: acpi_tb_validate_rsdp
*
- * PARAMETERS: Rsdp - Pointer to unvalidated RSDP
+ * PARAMETERS: rsdp - Pointer to unvalidated RSDP
*
* RETURN: Status
*
*
* RETURN: Status, RSDP physical address
*
- * DESCRIPTION: Search lower 1_mbyte of memory for the root system descriptor
+ * DESCRIPTION: Search lower 1Mbyte of memory for the root system descriptor
* pointer structure. If it is found, set *RSDP to point to it.
*
- * NOTE1: The RSDP must be either in the first 1_k of the Extended
+ * NOTE1: The RSDP must be either in the first 1K of the Extended
* BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.)
* Only a 32-bit physical address is necessary.
*
if (physical_address > 0x400) {
/*
* 1b) Search EBDA paragraphs (EBDA is required to be a
- * minimum of 1_k length)
+ * minimum of 1K length)
*/
table_ptr = acpi_os_map_memory((acpi_physical_address)
physical_address,
/* A valid RSDP was not found */
- ACPI_ERROR((AE_INFO, "A valid RSDP was not found"));
+ ACPI_BIOS_ERROR((AE_INFO, "A valid RSDP was not found"));
return_ACPI_STATUS(AE_NOT_FOUND);
}
* FUNCTION: acpi_tb_scan_memory_for_rsdp
*
* PARAMETERS: start_address - Starting pointer for search
- * Length - Maximum length to search
+ * length - Maximum length to search
*
* RETURN: Pointer to the RSDP if found, otherwise NULL.
*
* FUNCTION: acpi_ut_add_address_range
*
* PARAMETERS: space_id - Address space ID
- * Address - op_region start address
- * Length - op_region length
+ * address - op_region start address
+ * length - op_region length
* region_node - op_region namespace node
*
* RETURN: Status
* FUNCTION: acpi_ut_check_address_range
*
* PARAMETERS: space_id - Address space ID
- * Address - Start address
- * Length - Length of address range
- * Warn - TRUE if warning on overlap desired
+ * address - Start address
+ * length - Length of address range
+ * warn - TRUE if warning on overlap desired
*
* RETURN: Count of the number of conflicts detected. Zero is always
* returned for Space IDs other than Memory or I/O.
*
* FUNCTION: acpi_ut_validate_buffer
*
- * PARAMETERS: Buffer - Buffer descriptor to be validated
+ * PARAMETERS: buffer - Buffer descriptor to be validated
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_initialize_buffer
*
- * PARAMETERS: Buffer - Buffer to be validated
+ * PARAMETERS: buffer - Buffer to be validated
* required_length - Length needed
*
* RETURN: Status
*
* FUNCTION: acpi_ut_allocate
*
- * PARAMETERS: Size - Size of the allocation
- * Component - Component type of caller
- * Module - Source file name of caller
- * Line - Line number of caller
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
*
* RETURN: Address of the allocated memory on success, NULL on failure.
*
*
* FUNCTION: acpi_ut_allocate_zeroed
*
- * PARAMETERS: Size - Size of the allocation
- * Component - Component type of caller
- * Module - Source file name of caller
- * Line - Line number of caller
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
*
* RETURN: Address of the allocated memory on success, NULL on failure.
*
* FUNCTION: acpi_ut_copy_ipackage_to_epackage
*
* PARAMETERS: internal_object - Pointer to the object we are returning
- * Buffer - Where the object is returned
+ * buffer - Where the object is returned
* space_used - Where the object length is returned
*
* RETURN: Status
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Format - Printf format field
+ * format - Printf format field
* ... - Optional printf arguments
*
* RETURN: None
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Format - Printf format field
+ * format - Printf format field
* ... - Optional printf arguments
*
* RETURN: None
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Pointer - Pointer to display
+ * pointer - Pointer to display
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * String - Additional string to display
+ * string - Additional string to display
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Integer - Integer to display
+ * integer - Integer to display
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Status - Exit status code
+ * status - Exit status code
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Value - Value to be printed with exit msg
+ * value - Value to be printed with exit msg
*
* RETURN: None
*
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Ptr - Pointer to display
+ * ptr - Pointer to display
*
* RETURN: None
*
*
* FUNCTION: acpi_ut_dump_buffer
*
- * PARAMETERS: Buffer - Buffer to dump
- * Count - Amount to dump, in bytes
- * Display - BYTE, WORD, DWORD, or QWORD display
- * component_iD - Caller's component ID
+ * PARAMETERS: buffer - Buffer to dump
+ * count - Amount to dump, in bytes
+ * display - BYTE, WORD, DWORD, or QWORD display
+ * component_ID - Caller's component ID
*
* RETURN: None
*
*
* FUNCTION: acpi_ut_dump_buffer
*
- * PARAMETERS: Buffer - Buffer to dump
- * Count - Amount to dump, in bytes
- * Display - BYTE, WORD, DWORD, or QWORD display
- * component_iD - Caller's component ID
+ * PARAMETERS: buffer - Buffer to dump
+ * count - Amount to dump, in bytes
+ * display - BYTE, WORD, DWORD, or QWORD display
+ * component_ID - Caller's component ID
*
* RETURN: None
*
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utdecode")
-/*******************************************************************************
- *
- * FUNCTION: acpi_format_exception
- *
- * PARAMETERS: Status - The acpi_status code to be formatted
- *
- * RETURN: A string containing the exception text. A valid pointer is
- * always returned.
- *
- * DESCRIPTION: This function translates an ACPI exception into an ASCII string
- * It is here instead of utxface.c so it is always present.
- *
- ******************************************************************************/
-const char *acpi_format_exception(acpi_status status)
-{
- const char *exception = NULL;
-
- ACPI_FUNCTION_ENTRY();
-
- exception = acpi_ut_validate_exception(status);
- if (!exception) {
-
- /* Exception code was not recognized */
-
- ACPI_ERROR((AE_INFO,
- "Unknown exception code: 0x%8.8X", status));
-
- exception = "UNKNOWN_STATUS_CODE";
- }
-
- return (ACPI_CAST_PTR(const char, exception));
-}
-
-ACPI_EXPORT_SYMBOL(acpi_format_exception)
-
/*
* Properties of the ACPI Object Types, both internal and external.
* The table is indexed by values of acpi_object_type
*
* FUNCTION: acpi_ut_hex_to_ascii_char
*
- * PARAMETERS: Integer - Contains the hex digit
- * Position - bit position of the digit within the
+ * PARAMETERS: integer - Contains the hex digit
+ * position - bit position of the digit within the
* integer (multiple of 4)
*
* RETURN: The converted Ascii character
/* Region type decoding */
const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = {
- "SystemMemory",
- "SystemIO",
- "PCI_Config",
- "EmbeddedControl",
- "SMBus",
- "SystemCMOS",
- "PCIBARTarget",
- "IPMI",
- "GeneralPurposeIo",
- "GenericSerialBus"
+ "SystemMemory", /* 0x00 */
+ "SystemIO", /* 0x01 */
+ "PCI_Config", /* 0x02 */
+ "EmbeddedControl", /* 0x03 */
+ "SMBus", /* 0x04 */
+ "SystemCMOS", /* 0x05 */
+ "PCIBARTarget", /* 0x06 */
+ "IPMI", /* 0x07 */
+ "GeneralPurposeIo", /* 0x08 */
+ "GenericSerialBus", /* 0x09 */
+ "PCC" /* 0x0A */
};
char *acpi_ut_get_region_name(u8 space_id)
*
* FUNCTION: acpi_ut_get_type_name
*
- * PARAMETERS: Type - An ACPI object type
+ * PARAMETERS: type - An ACPI object type
*
* RETURN: Decoded ACPI object type name
*
*
* FUNCTION: acpi_ut_get_node_name
*
- * PARAMETERS: Object - A namespace node
+ * PARAMETERS: object - A namespace node
*
* RETURN: ASCII name of the node
*
*
* FUNCTION: acpi_ut_get_descriptor_name
*
- * PARAMETERS: Object - An ACPI object
+ * PARAMETERS: object - An ACPI object
*
* RETURN: Decoded name of the descriptor type
*
*
* FUNCTION: acpi_ut_get_reference_name
*
- * PARAMETERS: Object - An ACPI reference object
+ * PARAMETERS: object - An ACPI reference object
*
* RETURN: Decoded name of the type of reference
*
*
* FUNCTION: acpi_ut_valid_object_type
*
- * PARAMETERS: Type - Object type to be validated
+ * PARAMETERS: type - Object type to be validated
*
* RETURN: TRUE if valid object type, FALSE otherwise
*
*
* FUNCTION: acpi_ut_delete_internal_obj
*
- * PARAMETERS: Object - Object to be deleted
+ * PARAMETERS: object - Object to be deleted
*
* RETURN: None
*
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_THERMAL:
- /* Walk the notify handler list for this object */
+ /* Walk the address handler list for this object */
handler_desc = object->common_notify.handler;
while (handler_desc) {
*
* FUNCTION: acpi_ut_update_ref_count
*
- * PARAMETERS: Object - Object whose ref count is to be updated
- * Action - What to do
+ * PARAMETERS: object - Object whose ref count is to be updated
+ * action - What to do
*
* RETURN: New ref count
*
*
* FUNCTION: acpi_ut_update_object_reference
*
- * PARAMETERS: Object - Increment ref count for this object
+ * PARAMETERS: object - Increment ref count for this object
* and all sub-objects
- * Action - Either REF_INCREMENT or REF_DECREMENT or
+ * action - Either REF_INCREMENT or REF_DECREMENT or
* REF_FORCE_DELETE
*
* RETURN: Status
acpi_status status = AE_OK;
union acpi_generic_state *state_list = NULL;
union acpi_operand_object *next_object = NULL;
+ union acpi_operand_object *prev_object;
union acpi_generic_state *state;
u32 i;
case ACPI_TYPE_POWER:
case ACPI_TYPE_THERMAL:
- /* Update the notify objects for these types (if present) */
-
- acpi_ut_update_ref_count(object->common_notify.
- system_notify, action);
- acpi_ut_update_ref_count(object->common_notify.
- device_notify, action);
+ /*
+ * Update the notify objects for these types (if present)
+ * Two lists, system and device notify handlers.
+ */
+ for (i = 0; i < ACPI_NUM_NOTIFY_TYPES; i++) {
+ prev_object =
+ object->common_notify.notify_list[i];
+ while (prev_object) {
+ next_object =
+ prev_object->notify.next[i];
+ acpi_ut_update_ref_count(prev_object,
+ action);
+ prev_object = next_object;
+ }
+ }
break;
case ACPI_TYPE_PACKAGE:
*
* FUNCTION: acpi_ut_add_reference
*
- * PARAMETERS: Object - Object whose reference count is to be
+ * PARAMETERS: object - Object whose reference count is to be
* incremented
*
* RETURN: None
*
* FUNCTION: acpi_ut_remove_reference
*
- * PARAMETERS: Object - Object whose ref count will be decremented
+ * PARAMETERS: object - Object whose ref count will be decremented
*
* RETURN: None
*
* FUNCTION: acpi_ut_evaluate_object
*
* PARAMETERS: prefix_node - Starting node
- * Path - Path to object from starting node
+ * path - Path to object from starting node
* expected_return_types - Bitmap of allowed return types
* return_desc - Where a return value is stored
*
*
* PARAMETERS: object_name - Object name to be evaluated
* device_node - Node for the device
- * Value - Where the value is returned
+ * value - Where the value is returned
*
* RETURN: Status
*
* FUNCTION: acpi_ut_execute_STA
*
* PARAMETERS: device_node - Node for the device
- * Flags - Where the status flags are returned
+ * flags - Where the status flags are returned
*
* RETURN: Status
*
--- /dev/null
+/*******************************************************************************
+ *
+ * Module Name: utexcep - Exception code support
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#define ACPI_DEFINE_EXCEPTION_TABLE
+#include <linux/export.h>
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utexcep")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_format_exception
+ *
+ * PARAMETERS: status - The acpi_status code to be formatted
+ *
+ * RETURN: A string containing the exception text. A valid pointer is
+ * always returned.
+ *
+ * DESCRIPTION: This function translates an ACPI exception into an ASCII
+ * string. Returns "unknown status" string for invalid codes.
+ *
+ ******************************************************************************/
+const char *acpi_format_exception(acpi_status status)
+{
+ const char *exception = NULL;
+
+ ACPI_FUNCTION_ENTRY();
+
+ exception = acpi_ut_validate_exception(status);
+ if (!exception) {
+
+ /* Exception code was not recognized */
+
+ ACPI_ERROR((AE_INFO,
+ "Unknown exception code: 0x%8.8X", status));
+
+ exception = "UNKNOWN_STATUS_CODE";
+ }
+
+ return (ACPI_CAST_PTR(const char, exception));
+}
+
+ACPI_EXPORT_SYMBOL(acpi_format_exception)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_validate_exception
+ *
+ * PARAMETERS: status - The acpi_status code to be formatted
+ *
+ * RETURN: A string containing the exception text. NULL if exception is
+ * not valid.
+ *
+ * DESCRIPTION: This function validates and translates an ACPI exception into
+ * an ASCII string.
+ *
+ ******************************************************************************/
+const char *acpi_ut_validate_exception(acpi_status status)
+{
+ u32 sub_status;
+ const char *exception = NULL;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * Status is composed of two parts, a "type" and an actual code
+ */
+ sub_status = (status & ~AE_CODE_MASK);
+
+ switch (status & AE_CODE_MASK) {
+ case AE_CODE_ENVIRONMENTAL:
+
+ if (sub_status <= AE_CODE_ENV_MAX) {
+ exception = acpi_gbl_exception_names_env[sub_status];
+ }
+ break;
+
+ case AE_CODE_PROGRAMMER:
+
+ if (sub_status <= AE_CODE_PGM_MAX) {
+ exception = acpi_gbl_exception_names_pgm[sub_status];
+ }
+ break;
+
+ case AE_CODE_ACPI_TABLES:
+
+ if (sub_status <= AE_CODE_TBL_MAX) {
+ exception = acpi_gbl_exception_names_tbl[sub_status];
+ }
+ break;
+
+ case AE_CODE_AML:
+
+ if (sub_status <= AE_CODE_AML_MAX) {
+ exception = acpi_gbl_exception_names_aml[sub_status];
+ }
+ break;
+
+ case AE_CODE_CONTROL:
+
+ if (sub_status <= AE_CODE_CTRL_MAX) {
+ exception = acpi_gbl_exception_names_ctrl[sub_status];
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return (ACPI_CAST_PTR(const char, exception));
+}
*
* RETURN: Status
*
- * DESCRIPTION: Init library globals. All globals that require specific
- * initialization should be initialized here!
+ * DESCRIPTION: Initialize ACPICA globals. All globals that require specific
+ * initialization should be initialized here. This allows for
+ * a warm restart.
*
******************************************************************************/
acpi_gbl_owner_id_mask[i] = 0;
}
- /* Last owner_iD is never valid */
+ /* Last owner_ID is never valid */
acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000;
/* Global handlers */
- acpi_gbl_system_notify.handler = NULL;
- acpi_gbl_device_notify.handler = NULL;
+ acpi_gbl_global_notify[0].handler = NULL;
+ acpi_gbl_global_notify[1].handler = NULL;
acpi_gbl_exception_handler = NULL;
acpi_gbl_init_handler = NULL;
acpi_gbl_table_handler = NULL;
/******************************************************************************
*
- * Module Name: utids - support for device IDs - HID, UID, CID
+ * Module Name: utids - support for device Ids - HID, UID, CID
*
*****************************************************************************/
* FUNCTION: acpi_ut_create_rw_lock
* acpi_ut_delete_rw_lock
*
- * PARAMETERS: Lock - Pointer to a valid RW lock
+ * PARAMETERS: lock - Pointer to a valid RW lock
*
* RETURN: Status
*
* FUNCTION: acpi_ut_acquire_read_lock
* acpi_ut_release_read_lock
*
- * PARAMETERS: Lock - Pointer to a valid RW lock
+ * PARAMETERS: lock - Pointer to a valid RW lock
*
* RETURN: Status
*
* FUNCTION: acpi_ut_acquire_write_lock
* acpi_ut_release_write_lock
*
- * PARAMETERS: Lock - Pointer to a valid RW lock
+ * PARAMETERS: lock - Pointer to a valid RW lock
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_short_divide
*
- * PARAMETERS: Dividend - 64-bit dividend
- * Divisor - 32-bit divisor
+ * PARAMETERS: dividend - 64-bit dividend
+ * divisor - 32-bit divisor
* out_quotient - Pointer to where the quotient is returned
* out_remainder - Pointer to where the remainder is returned
*
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utmisc")
+#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP
/*******************************************************************************
*
- * FUNCTION: acpi_ut_validate_exception
+ * FUNCTION: ut_convert_backslashes
*
- * PARAMETERS: Status - The acpi_status code to be formatted
+ * PARAMETERS: pathname - File pathname string to be converted
*
- * RETURN: A string containing the exception text. NULL if exception is
- * not valid.
+ * RETURN: Modifies the input Pathname
*
- * DESCRIPTION: This function validates and translates an ACPI exception into
- * an ASCII string.
+ * DESCRIPTION: Convert all backslashes (0x5C) to forward slashes (0x2F) within
+ * the entire input file pathname string.
*
******************************************************************************/
-const char *acpi_ut_validate_exception(acpi_status status)
+void ut_convert_backslashes(char *pathname)
{
- u32 sub_status;
- const char *exception = NULL;
- ACPI_FUNCTION_ENTRY();
-
- /*
- * Status is composed of two parts, a "type" and an actual code
- */
- sub_status = (status & ~AE_CODE_MASK);
-
- switch (status & AE_CODE_MASK) {
- case AE_CODE_ENVIRONMENTAL:
-
- if (sub_status <= AE_CODE_ENV_MAX) {
- exception = acpi_gbl_exception_names_env[sub_status];
- }
- break;
-
- case AE_CODE_PROGRAMMER:
-
- if (sub_status <= AE_CODE_PGM_MAX) {
- exception = acpi_gbl_exception_names_pgm[sub_status];
- }
- break;
-
- case AE_CODE_ACPI_TABLES:
-
- if (sub_status <= AE_CODE_TBL_MAX) {
- exception = acpi_gbl_exception_names_tbl[sub_status];
- }
- break;
-
- case AE_CODE_AML:
-
- if (sub_status <= AE_CODE_AML_MAX) {
- exception = acpi_gbl_exception_names_aml[sub_status];
- }
- break;
-
- case AE_CODE_CONTROL:
+ if (!pathname) {
+ return;
+ }
- if (sub_status <= AE_CODE_CTRL_MAX) {
- exception = acpi_gbl_exception_names_ctrl[sub_status];
+ while (*pathname) {
+ if (*pathname == '\\') {
+ *pathname = '/';
}
- break;
- default:
- break;
+ pathname++;
}
-
- return (ACPI_CAST_PTR(const char, exception));
}
+#endif
/*******************************************************************************
*
* FUNCTION: acpi_ut_is_pci_root_bridge
*
- * PARAMETERS: Id - The HID/CID in string format
+ * PARAMETERS: id - The HID/CID in string format
*
* RETURN: TRUE if the Id is a match for a PCI/PCI-Express Root Bridge
*
*
* FUNCTION: acpi_ut_is_aml_table
*
- * PARAMETERS: Table - An ACPI table
+ * PARAMETERS: table - An ACPI table
*
* RETURN: TRUE if table contains executable AML; FALSE otherwise
*
*
* FUNCTION: acpi_ut_release_owner_id
*
- * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_iD
+ * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_ID
*
* RETURN: None. No error is returned because we are either exiting a
* control method or unloading a table. Either way, we would
*owner_id_ptr = 0;
- /* Zero is not a valid owner_iD */
+ /* Zero is not a valid owner_ID */
if (owner_id == 0) {
ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
*
* FUNCTION: acpi_ut_print_string
*
- * PARAMETERS: String - Null terminated ASCII string
+ * PARAMETERS: string - Null terminated ASCII string
* max_length - Maximum output length
*
* RETURN: None
*
* FUNCTION: acpi_ut_dword_byte_swap
*
- * PARAMETERS: Value - Value to be converted
+ * PARAMETERS: value - Value to be converted
*
* RETURN: u32 integer with bytes swapped
*
*
* FUNCTION: acpi_ut_display_init_pathname
*
- * PARAMETERS: Type - Object type of the node
+ * PARAMETERS: type - Object type of the node
* obj_handle - Handle whose pathname will be displayed
- * Path - Additional path string to be appended.
+ * path - Additional path string to be appended.
* (NULL if no extra path)
*
* RETURN: acpi_status
*
* FUNCTION: acpi_ut_valid_acpi_char
*
- * PARAMETERS: Char - The character to be examined
- * Position - Byte position (0-3)
+ * PARAMETERS: char - The character to be examined
+ * position - Byte position (0-3)
*
* RETURN: TRUE if the character is valid, FALSE otherwise
*
*
* FUNCTION: acpi_ut_valid_acpi_name
*
- * PARAMETERS: Name - The name to be examined
+ * PARAMETERS: name - The name to be examined
*
* RETURN: TRUE if the name is valid, FALSE otherwise
*
*
* FUNCTION: acpi_ut_repair_name
*
- * PARAMETERS: Name - The ACPI name to be repaired
+ * PARAMETERS: name - The ACPI name to be repaired
*
* RETURN: Repaired version of the name
*
*
* FUNCTION: acpi_ut_strtoul64
*
- * PARAMETERS: String - Null terminated string
- * Base - Radix of the string: 16 or ACPI_ANY_BASE;
+ * PARAMETERS: string - Null terminated string
+ * base - Radix of the string: 16 or ACPI_ANY_BASE;
* ACPI_ANY_BASE means 'in behalf of to_integer'
* ret_integer - Where the converted integer is returned
*
if (to_integer_op) {
/*
- * Base equal to ACPI_ANY_BASE means 'to_integer operation case'.
+ * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
* We need to determine if it is decimal or hexadecimal.
*/
if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
*
* FUNCTION: acpi_ut_create_update_state_and_push
*
- * PARAMETERS: Object - Object to be added to the new state
- * Action - Increment/Decrement
+ * PARAMETERS: object - Object to be added to the new state
+ * action - Increment/Decrement
* state_list - List the state will be added to
*
* RETURN: Status
* PARAMETERS: source_object - The package to walk
* target_object - Target object (if package is being copied)
* walk_callback - Called once for each package element
- * Context - Passed to the callback function
+ * context - Passed to the callback function
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_create_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be created
+ * PARAMETERS: mutex_ID - ID of the mutex to be created
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_delete_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be deleted
+ * PARAMETERS: mutex_ID - ID of the mutex to be deleted
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_acquire_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be acquired
+ * PARAMETERS: mutex_ID - ID of the mutex to be acquired
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_release_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be released
+ * PARAMETERS: mutex_ID - ID of the mutex to be released
*
* RETURN: Status
*
* PARAMETERS: module_name - Source file name of caller
* line_number - Line number of caller
* component_id - Component type of caller
- * Type - ACPI Type of the new object
+ * type - ACPI Type of the new object
*
* RETURN: A new internal object, null on failure
*
*
* FUNCTION: acpi_ut_create_package_object
*
- * PARAMETERS: Count - Number of package elements
+ * PARAMETERS: count - Number of package elements
*
* RETURN: Pointer to a new Package object, null on failure
*
*
* FUNCTION: acpi_ut_valid_internal_object
*
- * PARAMETERS: Object - Object to be validated
+ * PARAMETERS: object - Object to be validated
*
* RETURN: TRUE if object is valid, FALSE otherwise
*
- * DESCRIPTION: Validate a pointer to be a union acpi_operand_object
+ * DESCRIPTION: Validate a pointer to be of type union acpi_operand_object
*
******************************************************************************/
switch (ACPI_GET_DESCRIPTOR_TYPE(object)) {
case ACPI_DESC_TYPE_OPERAND:
- /* The object appears to be a valid union acpi_operand_object */
+ /* The object appears to be a valid union acpi_operand_object */
return (TRUE);
*
* FUNCTION: acpi_ut_delete_object_desc
*
- * PARAMETERS: Object - An Acpi internal object to be deleted
+ * PARAMETERS: object - An Acpi internal object to be deleted
*
* RETURN: None.
*
{
ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object);
- /* Object must be a union acpi_operand_object */
+ /* Object must be a union acpi_operand_object */
if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
ACPI_ERROR((AE_INFO,
{"Windows 2001.1", NULL, 0, ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */
{"Windows 2001 SP2", NULL, 0, ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */
{"Windows 2001.1 SP1", NULL, 0, ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */
- {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */
+ {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows vista - Added 03/2006 */
{"Windows 2006.1", NULL, 0, ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */
{"Windows 2006 SP1", NULL, 0, ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */
{"Windows 2006 SP2", NULL, 0, ACPI_OSI_WIN_VISTA_SP2}, /* Windows Vista SP2 - Added 09/2010 */
ACPI_SMALL_VARIABLE_LENGTH, /* 06 start_dependent_functions */
ACPI_FIXED_LENGTH, /* 07 end_dependent_functions */
ACPI_FIXED_LENGTH, /* 08 IO */
- ACPI_FIXED_LENGTH, /* 09 fixed_iO */
- ACPI_FIXED_LENGTH, /* 0_a fixed_dMA */
+ ACPI_FIXED_LENGTH, /* 09 fixed_IO */
+ ACPI_FIXED_LENGTH, /* 0A fixed_DMA */
0,
0,
0,
- ACPI_VARIABLE_LENGTH, /* 0_e vendor_short */
- ACPI_FIXED_LENGTH, /* 0_f end_tag */
+ ACPI_VARIABLE_LENGTH, /* 0E vendor_short */
+ ACPI_FIXED_LENGTH, /* 0F end_tag */
/* Large descriptors */
ACPI_FIXED_LENGTH, /* 06 memory32_fixed */
ACPI_VARIABLE_LENGTH, /* 07 Dword* address */
ACPI_VARIABLE_LENGTH, /* 08 Word* address */
- ACPI_VARIABLE_LENGTH, /* 09 extended_iRQ */
- ACPI_VARIABLE_LENGTH, /* 0_a Qword* address */
- ACPI_FIXED_LENGTH, /* 0_b Extended* address */
- ACPI_VARIABLE_LENGTH, /* 0_c Gpio* */
+ ACPI_VARIABLE_LENGTH, /* 09 extended_IRQ */
+ ACPI_VARIABLE_LENGTH, /* 0A Qword* address */
+ ACPI_FIXED_LENGTH, /* 0B Extended* address */
+ ACPI_VARIABLE_LENGTH, /* 0C Gpio* */
0,
- ACPI_VARIABLE_LENGTH /* 0_e *serial_bus */
+ ACPI_VARIABLE_LENGTH /* 0E *serial_bus */
};
/*
- * For the i_aSL compiler/disassembler, we don't want any error messages
+ * For the iASL compiler/disassembler, we don't want any error messages
* because the disassembler uses the resource validation code to determine
* if Buffer objects are actually Resource Templates.
*/
*
* FUNCTION: acpi_ut_walk_aml_resources
*
- * PARAMETERS: Aml - Pointer to the raw AML resource template
+ * PARAMETERS: aml - Pointer to the raw AML resource template
* aml_length - Length of the entire template
* user_function - Called once for each descriptor found. If
* NULL, a pointer to the end_tag is returned
- * Context - Passed to user_function
+ * context - Passed to user_function
*
* RETURN: Status
*
*
* FUNCTION: acpi_ut_validate_resource
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
* return_index - Where the resource index is returned. NULL
* if the index is not required.
*
*
* FUNCTION: acpi_ut_get_resource_type
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: The Resource Type with no extraneous bits (except the
* Large/Small descriptor bit -- this is left alone)
*
* FUNCTION: acpi_ut_get_resource_length
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: Byte Length
*
*
* FUNCTION: acpi_ut_get_resource_header_length
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: Length of the AML header (depends on large/small descriptor)
*
*
* FUNCTION: acpi_ut_get_descriptor_length
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: Byte length
*
*
* FUNCTION: acpi_ut_create_pkg_state_and_push
*
- * PARAMETERS: Object - Object to be added to the new state
- * Action - Increment/Decrement
+ * PARAMETERS: object - Object to be added to the new state
+ * action - Increment/Decrement
* state_list - List the state will be added to
*
* RETURN: Status
* FUNCTION: acpi_ut_push_generic_state
*
* PARAMETERS: list_head - Head of the state stack
- * State - State object to push
+ * state - State object to push
*
* RETURN: None
*
*
* FUNCTION: acpi_ut_create_update_state
*
- * PARAMETERS: Object - Initial Object to be installed in the state
- * Action - Update action to be performed
+ * PARAMETERS: object - Initial Object to be installed in the state
+ * action - Update action to be performed
*
* RETURN: New state object, null on failure
*
*
* FUNCTION: acpi_ut_create_pkg_state
*
- * PARAMETERS: Object - Initial Object to be installed in the state
- * Action - Update action to be performed
+ * PARAMETERS: object - Initial Object to be installed in the state
+ * action - Update action to be performed
*
* RETURN: New state object, null on failure
*
*
* FUNCTION: acpi_ut_delete_generic_state
*
- * PARAMETERS: State - The state object to be deleted
+ * PARAMETERS: state - The state object to be deleted
*
* RETURN: None
*
*
* FUNCTION: acpi_enable_subsystem
*
- * PARAMETERS: Flags - Init/enable Options
+ * PARAMETERS: flags - Init/enable Options
*
* RETURN: Status
*
*
* FUNCTION: acpi_initialize_objects
*
- * PARAMETERS: Flags - Init/enable Options
+ * PARAMETERS: flags - Init/enable Options
*
* RETURN: Status
*
* PARAMETERS: out_buffer - A buffer to receive the resources for the
* device
*
- * RETURN: Status - the status of the call
+ * RETURN: status - the status of the call
*
* DESCRIPTION: This function is called to get information about the current
* state of the ACPI subsystem. It will return system information
*
* FUNCTION: acpi_install_initialization_handler
*
- * PARAMETERS: Handler - Callback procedure
- * Function - Not (currently) used, see below
+ * PARAMETERS: handler - Callback procedure
+ * function - Not (currently) used, see below
*
* RETURN: Status
*
*
* FUNCTION: acpi_install_interface_handler
*
- * PARAMETERS: Handler - The _OSI interface handler to install
+ * PARAMETERS: handler - The _OSI interface handler to install
* NULL means "remove existing handler"
*
* RETURN: Status
* FUNCTION: acpi_check_address_range
*
* PARAMETERS: space_id - Address space ID
- * Address - Start address
- * Length - Length
- * Warn - TRUE if warning on overlap desired
+ * address - Start address
+ * length - Length
+ * warn - TRUE if warning on overlap desired
*
* RETURN: Count of the number of conflicts detected.
*
* This module is used for the in-kernel ACPICA as well as the ACPICA
* tools/applications.
*
- * For the i_aSL compiler case, the output is redirected to stderr so that
+ * For the iASL compiler case, the output is redirected to stderr so that
* any of the various ACPI errors and warnings do not appear in the output
* files, for either the compiler or disassembler portions of the tool.
*/
#else
/*
- * non-i_aSL case - no redirection, nothing to do
+ * non-iASL case - no redirection, nothing to do
*/
#define ACPI_MSG_REDIRECT_BEGIN
#define ACPI_MSG_REDIRECT_END
#define ACPI_MSG_EXCEPTION "ACPI Exception: "
#define ACPI_MSG_WARNING "ACPI Warning: "
#define ACPI_MSG_INFO "ACPI: "
+#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Bug: Error: "
+#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Bug: Warning: "
/*
* Common message suffix
*/
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Status - Status to be formatted
- * Format - Printf format string + additional args
+ * status - Status to be formatted
+ * format - Printf format string + additional args
*
* RETURN: None
*
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
ACPI_EXPORT_SYMBOL(acpi_info)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_bios_error
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print "ACPI Firmware Error" message with module/line/version
+ * info
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_error(const char *module_name,
+ u32 line_number, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_BIOS_ERROR);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_bios_error)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_bios_warning
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print "ACPI Firmware Warning" message with module/line/version
+ * info
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_warning(const char *module_name,
+ u32 line_number, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_BIOS_WARNING);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_bios_warning)
+
/*
* The remainder of this module contains internal error functions that may
* be configured out.
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Pathname - Full pathname to the node
+ * pathname - Full pathname to the node
* node_flags - From Namespace node for the method/object
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Message - Error message to use on failure
+ * message - Error message to use on failure
* prefix_node - Prefix relative to the path
- * Path - Path to the node (optional)
+ * path - Path to the node (optional)
* method_status - Execution status
*
* RETURN: None
*
* FUNCTION: acpi_ut_get_mutex_object
*
- * PARAMETERS: Handle - Mutex or prefix handle (optional)
- * Pathname - Mutex pathname (optional)
+ * PARAMETERS: handle - Mutex or prefix handle (optional)
+ * pathname - Mutex pathname (optional)
* ret_obj - Where the mutex object is returned
*
* RETURN: Status
*
* FUNCTION: acpi_acquire_mutex
*
- * PARAMETERS: Handle - Mutex or prefix handle (optional)
- * Pathname - Mutex pathname (optional)
- * Timeout - Max time to wait for the lock (millisec)
+ * PARAMETERS: handle - Mutex or prefix handle (optional)
+ * pathname - Mutex pathname (optional)
+ * timeout - Max time to wait for the lock (millisec)
*
* RETURN: Status
*
*
* FUNCTION: acpi_release_mutex
*
- * PARAMETERS: Handle - Mutex or prefix handle (optional)
- * Pathname - Mutex pathname (optional)
+ * PARAMETERS: handle - Mutex or prefix handle (optional)
+ * pathname - Mutex pathname (optional)
*
* RETURN: Status
*
}
*access_bit_width = 1UL << (access_size_code + 2);
+ /* Fixup common BIOS bug */
+ if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 &&
+ *access_bit_width < 32)
+ *access_bit_width = 32;
+
if ((bit_width + bit_offset) > *access_bit_width) {
pr_warning(FW_BUG APEI_PFX
"Invalid bit width + offset in GAR [0x%llx/%u/%u/%u/%u]\n",
else
val->intval = battery->capacity_now * 1000;
break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ if (battery->capacity_now && battery->full_charge_capacity)
+ val->intval = battery->capacity_now * 100/
+ battery->full_charge_capacity;
+ else
+ val->intval = 0;
+ break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = battery->model_number;
break;
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
POWER_SUPPLY_PROP_CHARGE_FULL,
POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_SERIAL_NUMBER,
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
POWER_SUPPLY_PROP_ENERGY_FULL,
POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_SERIAL_NUMBER,
capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT;
#endif
+#ifdef ACPI_HOTPLUG_OST
+ capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_HOTPLUG_OST_SUPPORT;
+#endif
+
if (!ghes_disable)
capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_APEI_SUPPORT;
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
int result;
int present;
acpi_status status;
-
-
- present = is_device_present(handle);
+ u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
printk(KERN_WARNING "Container driver received %s event\n",
(type == ACPI_NOTIFY_BUS_CHECK) ?
"ACPI_NOTIFY_BUS_CHECK" : "ACPI_NOTIFY_DEVICE_CHECK");
+
+ present = is_device_present(handle);
status = acpi_bus_get_device(handle, &device);
- if (present) {
- if (ACPI_FAILURE(status) || !device) {
- result = container_device_add(&device, handle);
- if (!result)
- kobject_uevent(&device->dev.kobj,
- KOBJ_ONLINE);
- else
- printk(KERN_WARNING
- "Failed to add container\n");
- }
- } else {
+ if (!present) {
if (ACPI_SUCCESS(status)) {
/* device exist and this is a remove request */
+ device->flags.eject_pending = 1;
kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
+ return;
}
+ break;
+ }
+
+ if (!ACPI_FAILURE(status) || device)
+ break;
+
+ result = container_device_add(&device, handle);
+ if (result) {
+ printk(KERN_WARNING "Failed to add container\n");
+ break;
}
+
+ kobject_uevent(&device->dev.kobj, KOBJ_ONLINE);
+ ost_code = ACPI_OST_SC_SUCCESS;
break;
+
case ACPI_NOTIFY_EJECT_REQUEST:
if (!acpi_bus_get_device(handle, &device) && device) {
+ device->flags.eject_pending = 1;
kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
+ return;
}
break;
+
default:
- break;
+ /* non-hotplug event; possibly handled by other handler */
+ return;
}
+
+ /* Inform firmware that the hotplug operation has completed */
+ (void) acpi_evaluate_hotplug_ost(handle, type, ost_code, NULL);
return;
}
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
if (dpc->wait)
- acpi_os_wait_events_complete(NULL);
+ acpi_os_wait_events_complete();
dpc->function(dpc->context);
kfree(dpc);
return __acpi_os_execute(0, function, context, 1);
}
-void acpi_os_wait_events_complete(void *context)
+void acpi_os_wait_events_complete(void)
{
flush_workqueue(kacpid_wq);
flush_workqueue(kacpi_notify_wq);
{
struct acpi_processor *pr;
struct acpi_device *device = NULL;
+ u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
int result;
-
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
if (!is_processor_present(handle))
break;
- if (acpi_bus_get_device(handle, &device)) {
- result = acpi_processor_device_add(handle, &device);
- if (result)
- printk(KERN_ERR PREFIX
- "Unable to add the device\n");
+ if (!acpi_bus_get_device(handle, &device))
+ break;
+
+ result = acpi_processor_device_add(handle, &device);
+ if (result) {
+ printk(KERN_ERR PREFIX "Unable to add the device\n");
break;
}
+
+ ost_code = ACPI_OST_SC_SUCCESS;
break;
+
case ACPI_NOTIFY_EJECT_REQUEST:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"received ACPI_NOTIFY_EJECT_REQUEST\n"));
if (!pr) {
printk(KERN_ERR PREFIX
"Driver data is NULL, dropping EJECT\n");
- return;
+ break;
}
+
+ /* REVISIT: update when eject is supported */
+ ost_code = ACPI_OST_SC_EJECT_NOT_SUPPORTED;
break;
+
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
- break;
+
+ /* non-hotplug event; possibly handled by other handler */
+ return;
}
+ /* Inform firmware that the hotplug operation has completed */
+ (void) acpi_evaluate_hotplug_ost(handle, event, ost_code, NULL);
return;
}
pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
/* determine latencies from FADT */
- pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
- pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;
+ pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency;
+ pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency;
/*
* FADT specified C2 latency must be less than or equal to
* 100 microseconds.
*/
- if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
+ if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency));
+ "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency));
/* invalidate C2 */
pr->power.states[ACPI_STATE_C2].address = 0;
}
* FADT supplied C3 latency must be less than or equal to
* 1000 microseconds.
*/
- if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
+ if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency));
+ "C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency));
/* invalidate C3 */
pr->power.states[ACPI_STATE_C3].address = 0;
}
}
static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL);
-static void acpi_bus_hot_remove_device(void *context)
+/**
+ * acpi_bus_hot_remove_device: hot-remove a device and its children
+ * @context: struct acpi_eject_event pointer (freed in this func)
+ *
+ * Hot-remove a device and its children. This function frees up the
+ * memory space passed by arg context, so that the caller may call
+ * this function asynchronously through acpi_os_hotplug_execute().
+ */
+void acpi_bus_hot_remove_device(void *context)
{
+ struct acpi_eject_event *ej_event = (struct acpi_eject_event *) context;
struct acpi_device *device;
- acpi_handle handle = context;
+ acpi_handle handle = ej_event->handle;
struct acpi_object_list arg_list;
union acpi_object arg;
acpi_status status = AE_OK;
+ u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
if (acpi_bus_get_device(handle, &device))
- return;
+ goto err_out;
if (!device)
- return;
+ goto err_out;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Hot-removing device %s...\n", dev_name(&device->dev)));
if (acpi_bus_trim(device, 1)) {
printk(KERN_ERR PREFIX
"Removing device failed\n");
- return;
+ goto err_out;
}
/* power off device */
* TBD: _EJD support.
*/
status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL);
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING PREFIX
- "Eject device failed\n");
+ if (ACPI_FAILURE(status)) {
+ if (status != AE_NOT_FOUND)
+ printk(KERN_WARNING PREFIX
+ "Eject device failed\n");
+ goto err_out;
+ }
+
+ kfree(context);
+ return;
+err_out:
+ /* Inform firmware the hot-remove operation has completed w/ error */
+ (void) acpi_evaluate_hotplug_ost(handle,
+ ej_event->event, ost_code, NULL);
+ kfree(context);
return;
}
acpi_status status;
acpi_object_type type = 0;
struct acpi_device *acpi_device = to_acpi_device(d);
+ struct acpi_eject_event *ej_event;
if ((!count) || (buf[0] != '1')) {
return -EINVAL;
goto err;
}
- acpi_os_hotplug_execute(acpi_bus_hot_remove_device, acpi_device->handle);
+ ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
+ if (!ej_event) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ej_event->handle = acpi_device->handle;
+ if (acpi_device->flags.eject_pending) {
+ /* event originated from ACPI eject notification */
+ ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
+ acpi_device->flags.eject_pending = 0;
+ } else {
+ /* event originated from user */
+ ej_event->event = ACPI_OST_EC_OSPM_EJECT;
+ (void) acpi_evaluate_hotplug_ost(ej_event->handle,
+ ej_event->event, ACPI_OST_SC_EJECT_IN_PROGRESS, NULL);
+ }
+
+ acpi_os_hotplug_execute(acpi_bus_hot_remove_device, (void *)ej_event);
err:
return ret;
}
static int acpi_pm_freeze(void)
{
acpi_disable_all_gpes();
- acpi_os_wait_events_complete(NULL);
+ acpi_os_wait_events_complete();
acpi_ec_block_transactions();
return 0;
}
return 0;
}
-static const char enabled[] = "kernel";
-static const char disabled[] = "user";
static int thermal_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
if (enable != tz->tz_enabled) {
tz->tz_enabled = enable;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "%s ACPI thermal control\n",
- tz->tz_enabled ? enabled : disabled));
+ "%s kernel ACPI thermal control\n",
+ tz->tz_enabled ? "Enable" : "Disable"));
acpi_thermal_check(tz);
}
return 0;
if (tz->trips.passive.flags.valid)
tz->thermal_zone =
- thermal_zone_device_register("acpitz", trips, tz,
+ thermal_zone_device_register("acpitz", trips, 0, tz,
&acpi_thermal_zone_ops,
tz->trips.passive.tc1,
tz->trips.passive.tc2,
tz->polling_frequency*100);
else
tz->thermal_zone =
- thermal_zone_device_register("acpitz", trips, tz,
+ thermal_zone_device_register("acpitz", trips, 0, tz,
&acpi_thermal_zone_ops,
0, 0, 0,
tz->polling_frequency*100);
return status;
}
EXPORT_SYMBOL(acpi_get_physical_device_location);
+
+/**
+ * acpi_evaluate_hotplug_ost: Evaluate _OST for hotplug operations
+ * @handle: ACPI device handle
+ * @source_event: source event code
+ * @status_code: status code
+ * @status_buf: optional detailed information (NULL if none)
+ *
+ * Evaluate _OST for hotplug operations. All ACPI hotplug handlers
+ * must call this function when evaluating _OST for hotplug operations.
+ * When the platform does not support _OST, this function has no effect.
+ */
+acpi_status
+acpi_evaluate_hotplug_ost(acpi_handle handle, u32 source_event,
+ u32 status_code, struct acpi_buffer *status_buf)
+{
+#ifdef ACPI_HOTPLUG_OST
+ union acpi_object params[3] = {
+ {.type = ACPI_TYPE_INTEGER,},
+ {.type = ACPI_TYPE_INTEGER,},
+ {.type = ACPI_TYPE_BUFFER,}
+ };
+ struct acpi_object_list arg_list = {3, params};
+ acpi_status status;
+
+ params[0].integer.value = source_event;
+ params[1].integer.value = status_code;
+ if (status_buf != NULL) {
+ params[2].buffer.pointer = status_buf->pointer;
+ params[2].buffer.length = status_buf->length;
+ } else {
+ params[2].buffer.pointer = NULL;
+ params[2].buffer.length = 0;
+ }
+
+ status = acpi_evaluate_object(handle, "_OST", &arg_list, NULL);
+ return status;
+#else
+ return AE_OK;
+#endif
+}
+EXPORT_SYMBOL(acpi_evaluate_hotplug_ost);
bool
depends on CPU_IDLE && NO_HZ
default y
+
+config ARCH_NEEDS_CPU_IDLE_COUPLED
+ def_bool n
#
obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
+obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
--- /dev/null
+/*
+ * coupled.c - helper functions to enter the same idle state on multiple cpus
+ *
+ * Copyright (c) 2011 Google, Inc.
+ *
+ * Author: Colin Cross <ccross@android.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpu.h>
+#include <linux/cpuidle.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "cpuidle.h"
+
+/**
+ * DOC: Coupled cpuidle states
+ *
+ * On some ARM SMP SoCs (OMAP4460, Tegra 2, and probably more), the
+ * cpus cannot be independently powered down, either due to
+ * sequencing restrictions (on Tegra 2, cpu 0 must be the last to
+ * power down), or due to HW bugs (on OMAP4460, a cpu powering up
+ * will corrupt the gic state unless the other cpu runs a work
+ * around). Each cpu has a power state that it can enter without
+ * coordinating with the other cpu (usually Wait For Interrupt, or
+ * WFI), and one or more "coupled" power states that affect blocks
+ * shared between the cpus (L2 cache, interrupt controller, and
+ * sometimes the whole SoC). Entering a coupled power state must
+ * be tightly controlled on both cpus.
+ *
+ * This file implements a solution, where each cpu will wait in the
+ * WFI state until all cpus are ready to enter a coupled state, at
+ * which point the coupled state function will be called on all
+ * cpus at approximately the same time.
+ *
+ * Once all cpus are ready to enter idle, they are woken by an smp
+ * cross call. At this point, there is a chance that one of the
+ * cpus will find work to do, and choose not to enter idle. A
+ * final pass is needed to guarantee that all cpus will call the
+ * power state enter function at the same time. During this pass,
+ * each cpu will increment the ready counter, and continue once the
+ * ready counter matches the number of online coupled cpus. If any
+ * cpu exits idle, the other cpus will decrement their counter and
+ * retry.
+ *
+ * requested_state stores the deepest coupled idle state each cpu
+ * is ready for. It is assumed that the states are indexed from
+ * shallowest (highest power, lowest exit latency) to deepest
+ * (lowest power, highest exit latency). The requested_state
+ * variable is not locked. It is only written from the cpu that
+ * it stores (or by the on/offlining cpu if that cpu is offline),
+ * and only read after all the cpus are ready for the coupled idle
+ * state are are no longer updating it.
+ *
+ * Three atomic counters are used. alive_count tracks the number
+ * of cpus in the coupled set that are currently or soon will be
+ * online. waiting_count tracks the number of cpus that are in
+ * the waiting loop, in the ready loop, or in the coupled idle state.
+ * ready_count tracks the number of cpus that are in the ready loop
+ * or in the coupled idle state.
+ *
+ * To use coupled cpuidle states, a cpuidle driver must:
+ *
+ * Set struct cpuidle_device.coupled_cpus to the mask of all
+ * coupled cpus, usually the same as cpu_possible_mask if all cpus
+ * are part of the same cluster. The coupled_cpus mask must be
+ * set in the struct cpuidle_device for each cpu.
+ *
+ * Set struct cpuidle_device.safe_state to a state that is not a
+ * coupled state. This is usually WFI.
+ *
+ * Set CPUIDLE_FLAG_COUPLED in struct cpuidle_state.flags for each
+ * state that affects multiple cpus.
+ *
+ * Provide a struct cpuidle_state.enter function for each state
+ * that affects multiple cpus. This function is guaranteed to be
+ * called on all cpus at approximately the same time. The driver
+ * should ensure that the cpus all abort together if any cpu tries
+ * to abort once the function is called. The function should return
+ * with interrupts still disabled.
+ */
+
+/**
+ * struct cpuidle_coupled - data for set of cpus that share a coupled idle state
+ * @coupled_cpus: mask of cpus that are part of the coupled set
+ * @requested_state: array of requested states for cpus in the coupled set
+ * @ready_waiting_counts: combined count of cpus in ready or waiting loops
+ * @online_count: count of cpus that are online
+ * @refcnt: reference count of cpuidle devices that are using this struct
+ * @prevent: flag to prevent coupled idle while a cpu is hotplugging
+ */
+struct cpuidle_coupled {
+ cpumask_t coupled_cpus;
+ int requested_state[NR_CPUS];
+ atomic_t ready_waiting_counts;
+ int online_count;
+ int refcnt;
+ int prevent;
+};
+
+#define WAITING_BITS 16
+#define MAX_WAITING_CPUS (1 << WAITING_BITS)
+#define WAITING_MASK (MAX_WAITING_CPUS - 1)
+#define READY_MASK (~WAITING_MASK)
+
+#define CPUIDLE_COUPLED_NOT_IDLE (-1)
+
+static DEFINE_MUTEX(cpuidle_coupled_lock);
+static DEFINE_PER_CPU(struct call_single_data, cpuidle_coupled_poke_cb);
+
+/*
+ * The cpuidle_coupled_poked_mask mask is used to avoid calling
+ * __smp_call_function_single with the per cpu call_single_data struct already
+ * in use. This prevents a deadlock where two cpus are waiting for each others
+ * call_single_data struct to be available
+ */
+static cpumask_t cpuidle_coupled_poked_mask;
+
+/**
+ * cpuidle_coupled_parallel_barrier - synchronize all online coupled cpus
+ * @dev: cpuidle_device of the calling cpu
+ * @a: atomic variable to hold the barrier
+ *
+ * No caller to this function will return from this function until all online
+ * cpus in the same coupled group have called this function. Once any caller
+ * has returned from this function, the barrier is immediately available for
+ * reuse.
+ *
+ * The atomic variable a must be initialized to 0 before any cpu calls
+ * this function, will be reset to 0 before any cpu returns from this function.
+ *
+ * Must only be called from within a coupled idle state handler
+ * (state.enter when state.flags has CPUIDLE_FLAG_COUPLED set).
+ *
+ * Provides full smp barrier semantics before and after calling.
+ */
+void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a)
+{
+ int n = dev->coupled->online_count;
+
+ smp_mb__before_atomic_inc();
+ atomic_inc(a);
+
+ while (atomic_read(a) < n)
+ cpu_relax();
+
+ if (atomic_inc_return(a) == n * 2) {
+ atomic_set(a, 0);
+ return;
+ }
+
+ while (atomic_read(a) > n)
+ cpu_relax();
+}
+
+/**
+ * cpuidle_state_is_coupled - check if a state is part of a coupled set
+ * @dev: struct cpuidle_device for the current cpu
+ * @drv: struct cpuidle_driver for the platform
+ * @state: index of the target state in drv->states
+ *
+ * Returns true if the target state is coupled with cpus besides this one
+ */
+bool cpuidle_state_is_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int state)
+{
+ return drv->states[state].flags & CPUIDLE_FLAG_COUPLED;
+}
+
+/**
+ * cpuidle_coupled_set_ready - mark a cpu as ready
+ * @coupled: the struct coupled that contains the current cpu
+ */
+static inline void cpuidle_coupled_set_ready(struct cpuidle_coupled *coupled)
+{
+ atomic_add(MAX_WAITING_CPUS, &coupled->ready_waiting_counts);
+}
+
+/**
+ * cpuidle_coupled_set_not_ready - mark a cpu as not ready
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Decrements the ready counter, unless the ready (and thus the waiting) counter
+ * is equal to the number of online cpus. Prevents a race where one cpu
+ * decrements the waiting counter and then re-increments it just before another
+ * cpu has decremented its ready counter, leading to the ready counter going
+ * down from the number of online cpus without going through the coupled idle
+ * state.
+ *
+ * Returns 0 if the counter was decremented successfully, -EINVAL if the ready
+ * counter was equal to the number of online cpus.
+ */
+static
+inline int cpuidle_coupled_set_not_ready(struct cpuidle_coupled *coupled)
+{
+ int all;
+ int ret;
+
+ all = coupled->online_count || (coupled->online_count << WAITING_BITS);
+ ret = atomic_add_unless(&coupled->ready_waiting_counts,
+ -MAX_WAITING_CPUS, all);
+
+ return ret ? 0 : -EINVAL;
+}
+
+/**
+ * cpuidle_coupled_no_cpus_ready - check if no cpus in a coupled set are ready
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns true if all of the cpus in a coupled set are out of the ready loop.
+ */
+static inline int cpuidle_coupled_no_cpus_ready(struct cpuidle_coupled *coupled)
+{
+ int r = atomic_read(&coupled->ready_waiting_counts) >> WAITING_BITS;
+ return r == 0;
+}
+
+/**
+ * cpuidle_coupled_cpus_ready - check if all cpus in a coupled set are ready
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns true if all cpus coupled to this target state are in the ready loop
+ */
+static inline bool cpuidle_coupled_cpus_ready(struct cpuidle_coupled *coupled)
+{
+ int r = atomic_read(&coupled->ready_waiting_counts) >> WAITING_BITS;
+ return r == coupled->online_count;
+}
+
+/**
+ * cpuidle_coupled_cpus_waiting - check if all cpus in a coupled set are waiting
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns true if all cpus coupled to this target state are in the wait loop
+ */
+static inline bool cpuidle_coupled_cpus_waiting(struct cpuidle_coupled *coupled)
+{
+ int w = atomic_read(&coupled->ready_waiting_counts) & WAITING_MASK;
+ return w == coupled->online_count;
+}
+
+/**
+ * cpuidle_coupled_no_cpus_waiting - check if no cpus in coupled set are waiting
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns true if all of the cpus in a coupled set are out of the waiting loop.
+ */
+static inline int cpuidle_coupled_no_cpus_waiting(struct cpuidle_coupled *coupled)
+{
+ int w = atomic_read(&coupled->ready_waiting_counts) & WAITING_MASK;
+ return w == 0;
+}
+
+/**
+ * cpuidle_coupled_get_state - determine the deepest idle state
+ * @dev: struct cpuidle_device for this cpu
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Returns the deepest idle state that all coupled cpus can enter
+ */
+static inline int cpuidle_coupled_get_state(struct cpuidle_device *dev,
+ struct cpuidle_coupled *coupled)
+{
+ int i;
+ int state = INT_MAX;
+
+ /*
+ * Read barrier ensures that read of requested_state is ordered after
+ * reads of ready_count. Matches the write barriers
+ * cpuidle_set_state_waiting.
+ */
+ smp_rmb();
+
+ for_each_cpu_mask(i, coupled->coupled_cpus)
+ if (cpu_online(i) && coupled->requested_state[i] < state)
+ state = coupled->requested_state[i];
+
+ return state;
+}
+
+static void cpuidle_coupled_poked(void *info)
+{
+ int cpu = (unsigned long)info;
+ cpumask_clear_cpu(cpu, &cpuidle_coupled_poked_mask);
+}
+
+/**
+ * cpuidle_coupled_poke - wake up a cpu that may be waiting
+ * @cpu: target cpu
+ *
+ * Ensures that the target cpu exits it's waiting idle state (if it is in it)
+ * and will see updates to waiting_count before it re-enters it's waiting idle
+ * state.
+ *
+ * If cpuidle_coupled_poked_mask is already set for the target cpu, that cpu
+ * either has or will soon have a pending IPI that will wake it out of idle,
+ * or it is currently processing the IPI and is not in idle.
+ */
+static void cpuidle_coupled_poke(int cpu)
+{
+ struct call_single_data *csd = &per_cpu(cpuidle_coupled_poke_cb, cpu);
+
+ if (!cpumask_test_and_set_cpu(cpu, &cpuidle_coupled_poked_mask))
+ __smp_call_function_single(cpu, csd, 0);
+}
+
+/**
+ * cpuidle_coupled_poke_others - wake up all other cpus that may be waiting
+ * @dev: struct cpuidle_device for this cpu
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Calls cpuidle_coupled_poke on all other online cpus.
+ */
+static void cpuidle_coupled_poke_others(int this_cpu,
+ struct cpuidle_coupled *coupled)
+{
+ int cpu;
+
+ for_each_cpu_mask(cpu, coupled->coupled_cpus)
+ if (cpu != this_cpu && cpu_online(cpu))
+ cpuidle_coupled_poke(cpu);
+}
+
+/**
+ * cpuidle_coupled_set_waiting - mark this cpu as in the wait loop
+ * @dev: struct cpuidle_device for this cpu
+ * @coupled: the struct coupled that contains the current cpu
+ * @next_state: the index in drv->states of the requested state for this cpu
+ *
+ * Updates the requested idle state for the specified cpuidle device,
+ * poking all coupled cpus out of idle if necessary to let them see the new
+ * state.
+ */
+static void cpuidle_coupled_set_waiting(int cpu,
+ struct cpuidle_coupled *coupled, int next_state)
+{
+ int w;
+
+ coupled->requested_state[cpu] = next_state;
+
+ /*
+ * If this is the last cpu to enter the waiting state, poke
+ * all the other cpus out of their waiting state so they can
+ * enter a deeper state. This can race with one of the cpus
+ * exiting the waiting state due to an interrupt and
+ * decrementing waiting_count, see comment below.
+ *
+ * The atomic_inc_return provides a write barrier to order the write
+ * to requested_state with the later write that increments ready_count.
+ */
+ w = atomic_inc_return(&coupled->ready_waiting_counts) & WAITING_MASK;
+ if (w == coupled->online_count)
+ cpuidle_coupled_poke_others(cpu, coupled);
+}
+
+/**
+ * cpuidle_coupled_set_not_waiting - mark this cpu as leaving the wait loop
+ * @dev: struct cpuidle_device for this cpu
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Removes the requested idle state for the specified cpuidle device.
+ */
+static void cpuidle_coupled_set_not_waiting(int cpu,
+ struct cpuidle_coupled *coupled)
+{
+ /*
+ * Decrementing waiting count can race with incrementing it in
+ * cpuidle_coupled_set_waiting, but that's OK. Worst case, some
+ * cpus will increment ready_count and then spin until they
+ * notice that this cpu has cleared it's requested_state.
+ */
+ atomic_dec(&coupled->ready_waiting_counts);
+
+ coupled->requested_state[cpu] = CPUIDLE_COUPLED_NOT_IDLE;
+}
+
+/**
+ * cpuidle_coupled_set_done - mark this cpu as leaving the ready loop
+ * @cpu: the current cpu
+ * @coupled: the struct coupled that contains the current cpu
+ *
+ * Marks this cpu as no longer in the ready and waiting loops. Decrements
+ * the waiting count first to prevent another cpu looping back in and seeing
+ * this cpu as waiting just before it exits idle.
+ */
+static void cpuidle_coupled_set_done(int cpu, struct cpuidle_coupled *coupled)
+{
+ cpuidle_coupled_set_not_waiting(cpu, coupled);
+ atomic_sub(MAX_WAITING_CPUS, &coupled->ready_waiting_counts);
+}
+
+/**
+ * cpuidle_coupled_clear_pokes - spin until the poke interrupt is processed
+ * @cpu - this cpu
+ *
+ * Turns on interrupts and spins until any outstanding poke interrupts have
+ * been processed and the poke bit has been cleared.
+ *
+ * Other interrupts may also be processed while interrupts are enabled, so
+ * need_resched() must be tested after turning interrupts off again to make sure
+ * the interrupt didn't schedule work that should take the cpu out of idle.
+ *
+ * Returns 0 if need_resched was false, -EINTR if need_resched was true.
+ */
+static int cpuidle_coupled_clear_pokes(int cpu)
+{
+ local_irq_enable();
+ while (cpumask_test_cpu(cpu, &cpuidle_coupled_poked_mask))
+ cpu_relax();
+ local_irq_disable();
+
+ return need_resched() ? -EINTR : 0;
+}
+
+/**
+ * cpuidle_enter_state_coupled - attempt to enter a state with coupled cpus
+ * @dev: struct cpuidle_device for the current cpu
+ * @drv: struct cpuidle_driver for the platform
+ * @next_state: index of the requested state in drv->states
+ *
+ * Coordinate with coupled cpus to enter the target state. This is a two
+ * stage process. In the first stage, the cpus are operating independently,
+ * and may call into cpuidle_enter_state_coupled at completely different times.
+ * To save as much power as possible, the first cpus to call this function will
+ * go to an intermediate state (the cpuidle_device's safe state), and wait for
+ * all the other cpus to call this function. Once all coupled cpus are idle,
+ * the second stage will start. Each coupled cpu will spin until all cpus have
+ * guaranteed that they will call the target_state.
+ *
+ * This function must be called with interrupts disabled. It may enable
+ * interrupts while preparing for idle, and it will always return with
+ * interrupts enabled.
+ */
+int cpuidle_enter_state_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int next_state)
+{
+ int entered_state = -1;
+ struct cpuidle_coupled *coupled = dev->coupled;
+
+ if (!coupled)
+ return -EINVAL;
+
+ while (coupled->prevent) {
+ if (cpuidle_coupled_clear_pokes(dev->cpu)) {
+ local_irq_enable();
+ return entered_state;
+ }
+ entered_state = cpuidle_enter_state(dev, drv,
+ dev->safe_state_index);
+ }
+
+ /* Read barrier ensures online_count is read after prevent is cleared */
+ smp_rmb();
+
+ cpuidle_coupled_set_waiting(dev->cpu, coupled, next_state);
+
+retry:
+ /*
+ * Wait for all coupled cpus to be idle, using the deepest state
+ * allowed for a single cpu.
+ */
+ while (!cpuidle_coupled_cpus_waiting(coupled)) {
+ if (cpuidle_coupled_clear_pokes(dev->cpu)) {
+ cpuidle_coupled_set_not_waiting(dev->cpu, coupled);
+ goto out;
+ }
+
+ if (coupled->prevent) {
+ cpuidle_coupled_set_not_waiting(dev->cpu, coupled);
+ goto out;
+ }
+
+ entered_state = cpuidle_enter_state(dev, drv,
+ dev->safe_state_index);
+ }
+
+ if (cpuidle_coupled_clear_pokes(dev->cpu)) {
+ cpuidle_coupled_set_not_waiting(dev->cpu, coupled);
+ goto out;
+ }
+
+ /*
+ * All coupled cpus are probably idle. There is a small chance that
+ * one of the other cpus just became active. Increment the ready count,
+ * and spin until all coupled cpus have incremented the counter. Once a
+ * cpu has incremented the ready counter, it cannot abort idle and must
+ * spin until either all cpus have incremented the ready counter, or
+ * another cpu leaves idle and decrements the waiting counter.
+ */
+
+ cpuidle_coupled_set_ready(coupled);
+ while (!cpuidle_coupled_cpus_ready(coupled)) {
+ /* Check if any other cpus bailed out of idle. */
+ if (!cpuidle_coupled_cpus_waiting(coupled))
+ if (!cpuidle_coupled_set_not_ready(coupled))
+ goto retry;
+
+ cpu_relax();
+ }
+
+ /* all cpus have acked the coupled state */
+ next_state = cpuidle_coupled_get_state(dev, coupled);
+
+ entered_state = cpuidle_enter_state(dev, drv, next_state);
+
+ cpuidle_coupled_set_done(dev->cpu, coupled);
+
+out:
+ /*
+ * Normal cpuidle states are expected to return with irqs enabled.
+ * That leads to an inefficiency where a cpu receiving an interrupt
+ * that brings it out of idle will process that interrupt before
+ * exiting the idle enter function and decrementing ready_count. All
+ * other cpus will need to spin waiting for the cpu that is processing
+ * the interrupt. If the driver returns with interrupts disabled,
+ * all other cpus will loop back into the safe idle state instead of
+ * spinning, saving power.
+ *
+ * Calling local_irq_enable here allows coupled states to return with
+ * interrupts disabled, but won't cause problems for drivers that
+ * exit with interrupts enabled.
+ */
+ local_irq_enable();
+
+ /*
+ * Wait until all coupled cpus have exited idle. There is no risk that
+ * a cpu exits and re-enters the ready state because this cpu has
+ * already decremented its waiting_count.
+ */
+ while (!cpuidle_coupled_no_cpus_ready(coupled))
+ cpu_relax();
+
+ return entered_state;
+}
+
+static void cpuidle_coupled_update_online_cpus(struct cpuidle_coupled *coupled)
+{
+ cpumask_t cpus;
+ cpumask_and(&cpus, cpu_online_mask, &coupled->coupled_cpus);
+ coupled->online_count = cpumask_weight(&cpus);
+}
+
+/**
+ * cpuidle_coupled_register_device - register a coupled cpuidle device
+ * @dev: struct cpuidle_device for the current cpu
+ *
+ * Called from cpuidle_register_device to handle coupled idle init. Finds the
+ * cpuidle_coupled struct for this set of coupled cpus, or creates one if none
+ * exists yet.
+ */
+int cpuidle_coupled_register_device(struct cpuidle_device *dev)
+{
+ int cpu;
+ struct cpuidle_device *other_dev;
+ struct call_single_data *csd;
+ struct cpuidle_coupled *coupled;
+
+ if (cpumask_empty(&dev->coupled_cpus))
+ return 0;
+
+ for_each_cpu_mask(cpu, dev->coupled_cpus) {
+ other_dev = per_cpu(cpuidle_devices, cpu);
+ if (other_dev && other_dev->coupled) {
+ coupled = other_dev->coupled;
+ goto have_coupled;
+ }
+ }
+
+ /* No existing coupled info found, create a new one */
+ coupled = kzalloc(sizeof(struct cpuidle_coupled), GFP_KERNEL);
+ if (!coupled)
+ return -ENOMEM;
+
+ coupled->coupled_cpus = dev->coupled_cpus;
+
+have_coupled:
+ dev->coupled = coupled;
+ if (WARN_ON(!cpumask_equal(&dev->coupled_cpus, &coupled->coupled_cpus)))
+ coupled->prevent++;
+
+ cpuidle_coupled_update_online_cpus(coupled);
+
+ coupled->refcnt++;
+
+ csd = &per_cpu(cpuidle_coupled_poke_cb, dev->cpu);
+ csd->func = cpuidle_coupled_poked;
+ csd->info = (void *)(unsigned long)dev->cpu;
+
+ return 0;
+}
+
+/**
+ * cpuidle_coupled_unregister_device - unregister a coupled cpuidle device
+ * @dev: struct cpuidle_device for the current cpu
+ *
+ * Called from cpuidle_unregister_device to tear down coupled idle. Removes the
+ * cpu from the coupled idle set, and frees the cpuidle_coupled_info struct if
+ * this was the last cpu in the set.
+ */
+void cpuidle_coupled_unregister_device(struct cpuidle_device *dev)
+{
+ struct cpuidle_coupled *coupled = dev->coupled;
+
+ if (cpumask_empty(&dev->coupled_cpus))
+ return;
+
+ if (--coupled->refcnt)
+ kfree(coupled);
+ dev->coupled = NULL;
+}
+
+/**
+ * cpuidle_coupled_prevent_idle - prevent cpus from entering a coupled state
+ * @coupled: the struct coupled that contains the cpu that is changing state
+ *
+ * Disables coupled cpuidle on a coupled set of cpus. Used to ensure that
+ * cpu_online_mask doesn't change while cpus are coordinating coupled idle.
+ */
+static void cpuidle_coupled_prevent_idle(struct cpuidle_coupled *coupled)
+{
+ int cpu = get_cpu();
+
+ /* Force all cpus out of the waiting loop. */
+ coupled->prevent++;
+ cpuidle_coupled_poke_others(cpu, coupled);
+ put_cpu();
+ while (!cpuidle_coupled_no_cpus_waiting(coupled))
+ cpu_relax();
+}
+
+/**
+ * cpuidle_coupled_allow_idle - allows cpus to enter a coupled state
+ * @coupled: the struct coupled that contains the cpu that is changing state
+ *
+ * Enables coupled cpuidle on a coupled set of cpus. Used to ensure that
+ * cpu_online_mask doesn't change while cpus are coordinating coupled idle.
+ */
+static void cpuidle_coupled_allow_idle(struct cpuidle_coupled *coupled)
+{
+ int cpu = get_cpu();
+
+ /*
+ * Write barrier ensures readers see the new online_count when they
+ * see prevent == 0.
+ */
+ smp_wmb();
+ coupled->prevent--;
+ /* Force cpus out of the prevent loop. */
+ cpuidle_coupled_poke_others(cpu, coupled);
+ put_cpu();
+}
+
+/**
+ * cpuidle_coupled_cpu_notify - notifier called during hotplug transitions
+ * @nb: notifier block
+ * @action: hotplug transition
+ * @hcpu: target cpu number
+ *
+ * Called when a cpu is brought on or offline using hotplug. Updates the
+ * coupled cpu set appropriately
+ */
+static int cpuidle_coupled_cpu_notify(struct notifier_block *nb,
+ unsigned long action, void *hcpu)
+{
+ int cpu = (unsigned long)hcpu;
+ struct cpuidle_device *dev;
+
+ mutex_lock(&cpuidle_lock);
+
+ dev = per_cpu(cpuidle_devices, cpu);
+ if (!dev->coupled)
+ goto out;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_UP_PREPARE:
+ case CPU_DOWN_PREPARE:
+ cpuidle_coupled_prevent_idle(dev->coupled);
+ break;
+ case CPU_ONLINE:
+ case CPU_DEAD:
+ cpuidle_coupled_update_online_cpus(dev->coupled);
+ /* Fall through */
+ case CPU_UP_CANCELED:
+ case CPU_DOWN_FAILED:
+ cpuidle_coupled_allow_idle(dev->coupled);
+ break;
+ }
+
+out:
+ mutex_unlock(&cpuidle_lock);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cpuidle_coupled_cpu_notifier = {
+ .notifier_call = cpuidle_coupled_cpu_notify,
+};
+
+static int __init cpuidle_coupled_init(void)
+{
+ return register_cpu_notifier(&cpuidle_coupled_cpu_notifier);
+}
+core_initcall(cpuidle_coupled_init);
return -ENODEV;
}
+/**
+ * cpuidle_enter_state - enter the state and update stats
+ * @dev: cpuidle device for this cpu
+ * @drv: cpuidle driver for this cpu
+ * @next_state: index into drv->states of the state to enter
+ */
+int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
+ int next_state)
+{
+ int entered_state;
+
+ entered_state = cpuidle_enter_ops(dev, drv, next_state);
+
+ if (entered_state >= 0) {
+ /* Update cpuidle counters */
+ /* This can be moved to within driver enter routine
+ * but that results in multiple copies of same code.
+ */
+ dev->states_usage[entered_state].time +=
+ (unsigned long long)dev->last_residency;
+ dev->states_usage[entered_state].usage++;
+ } else {
+ dev->last_residency = 0;
+ }
+
+ return entered_state;
+}
+
/**
* cpuidle_idle_call - the main idle loop
*
if (!dev || !dev->enabled)
return -EBUSY;
-#if 0
- /* shows regressions, re-enable for 2.6.29 */
- /*
- * run any timers that can be run now, at this point
- * before calculating the idle duration etc.
- */
- hrtimer_peek_ahead_timers();
-#endif
-
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(drv, dev);
if (need_resched()) {
trace_power_start_rcuidle(POWER_CSTATE, next_state, dev->cpu);
trace_cpu_idle_rcuidle(next_state, dev->cpu);
- entered_state = cpuidle_enter_ops(dev, drv, next_state);
+ if (cpuidle_state_is_coupled(dev, drv, next_state))
+ entered_state = cpuidle_enter_state_coupled(dev, drv,
+ next_state);
+ else
+ entered_state = cpuidle_enter_state(dev, drv, next_state);
trace_power_end_rcuidle(dev->cpu);
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
- if (entered_state >= 0) {
- /* Update cpuidle counters */
- /* This can be moved to within driver enter routine
- * but that results in multiple copies of same code.
- */
- dev->states_usage[entered_state].time +=
- (unsigned long long)dev->last_residency;
- dev->states_usage[entered_state].usage++;
- } else {
- dev->last_residency = 0;
- }
-
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
cpuidle_curr_governor->reflect(dev, entered_state);
int ret, i;
struct cpuidle_driver *drv = cpuidle_get_driver();
+ if (!dev)
+ return -EINVAL;
+
if (dev->enabled)
return 0;
if (!drv || !cpuidle_curr_governor)
struct device *cpu_dev = get_cpu_device((unsigned long)dev->cpu);
struct cpuidle_driver *cpuidle_driver = cpuidle_get_driver();
- if (!dev)
- return -EINVAL;
if (!try_module_get(cpuidle_driver->owner))
return -EINVAL;
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
- if ((ret = cpuidle_add_sysfs(cpu_dev))) {
- module_put(cpuidle_driver->owner);
- return ret;
- }
+ ret = cpuidle_add_sysfs(cpu_dev);
+ if (ret)
+ goto err_sysfs;
+
+ ret = cpuidle_coupled_register_device(dev);
+ if (ret)
+ goto err_coupled;
dev->registered = 1;
return 0;
+
+err_coupled:
+ cpuidle_remove_sysfs(cpu_dev);
+ wait_for_completion(&dev->kobj_unregister);
+err_sysfs:
+ list_del(&dev->device_list);
+ per_cpu(cpuidle_devices, dev->cpu) = NULL;
+ module_put(cpuidle_driver->owner);
+ return ret;
}
/**
{
int ret;
+ if (!dev)
+ return -EINVAL;
+
mutex_lock(&cpuidle_lock);
if ((ret = __cpuidle_register_device(dev))) {
wait_for_completion(&dev->kobj_unregister);
per_cpu(cpuidle_devices, dev->cpu) = NULL;
+ cpuidle_coupled_unregister_device(dev);
+
cpuidle_resume_and_unlock();
module_put(cpuidle_driver->owner);
extern struct mutex cpuidle_lock;
extern spinlock_t cpuidle_driver_lock;
extern int cpuidle_disabled(void);
+extern int cpuidle_enter_state(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int next_state);
/* idle loop */
extern void cpuidle_install_idle_handler(void);
extern int cpuidle_add_sysfs(struct device *dev);
extern void cpuidle_remove_sysfs(struct device *dev);
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
+bool cpuidle_state_is_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int state);
+int cpuidle_enter_state_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int next_state);
+int cpuidle_coupled_register_device(struct cpuidle_device *dev);
+void cpuidle_coupled_unregister_device(struct cpuidle_device *dev);
+#else
+static inline bool cpuidle_state_is_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int state)
+{
+ return false;
+}
+
+static inline int cpuidle_enter_state_coupled(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int next_state)
+{
+ return -1;
+}
+
+static inline int cpuidle_coupled_register_device(struct cpuidle_device *dev)
+{
+ return 0;
+}
+
+static inline void cpuidle_coupled_unregister_device(struct cpuidle_device *dev)
+{
+}
+#endif
+
#endif /* __DRIVER_CPUIDLE_H */
.enter = &intel_idle },
};
+static struct cpuidle_state ivb_cstates[MWAIT_MAX_NUM_CSTATES] = {
+ { /* MWAIT C0 */ },
+ { /* MWAIT C1 */
+ .name = "C1-IVB",
+ .desc = "MWAIT 0x00",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .enter = &intel_idle },
+ { /* MWAIT C2 */
+ .name = "C3-IVB",
+ .desc = "MWAIT 0x10",
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 59,
+ .target_residency = 156,
+ .enter = &intel_idle },
+ { /* MWAIT C3 */
+ .name = "C6-IVB",
+ .desc = "MWAIT 0x20",
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 80,
+ .target_residency = 300,
+ .enter = &intel_idle },
+ { /* MWAIT C4 */
+ .name = "C7-IVB",
+ .desc = "MWAIT 0x30",
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 87,
+ .target_residency = 300,
+ .enter = &intel_idle },
+};
+
static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
{ /* MWAIT C0 */ },
{ /* MWAIT C1 */
.state_table = snb_cstates,
};
+static const struct idle_cpu idle_cpu_ivb = {
+ .state_table = ivb_cstates,
+};
+
#define ICPU(model, cpu) \
{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu }
ICPU(0x2f, idle_cpu_nehalem),
ICPU(0x2a, idle_cpu_snb),
ICPU(0x2d, idle_cpu_snb),
+ ICPU(0x3a, idle_cpu_ivb),
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);
if (IS_ERR(cl_dev))
return -EINVAL;
- thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
&acerhdf_dev_ops, 0, 0, 0,
(kernelmode) ? interval*1000 : 0);
if (IS_ERR(thz_dev))
goto err;
}
pinfo->tzd[i] = thermal_zone_device_register(name[i],
- 0, td_info, &tzd_ops, 0, 0, 0, 0);
+ 0, 0, td_info, &tzd_ops, 0, 0, 0, 0);
if (IS_ERR(pinfo->tzd[i])) {
kfree(td_info);
ret = PTR_ERR(pinfo->tzd[i]);
bool "SPEAr thermal sensor driver"
depends on THERMAL
depends on PLAT_SPEAR
+ depends on OF
help
Enable this to plug the SPEAr thermal sensor driver into the Linux
thermal framework
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/spear_thermal.h>
#include <linux/thermal.h>
#define MD_FACTOR 1000
{
struct thermal_zone_device *spear_thermal = NULL;
struct spear_thermal_dev *stdev;
- struct spear_thermal_pdata *pdata;
- int ret = 0;
+ struct device_node *np = pdev->dev.of_node;
struct resource *stres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int ret = 0, val;
+
+ if (!np || !of_property_read_u32(np, "st,thermal-flags", &val)) {
+ dev_err(&pdev->dev, "Failed: DT Pdata not passed\n");
+ return -EINVAL;
+ }
if (!stres) {
dev_err(&pdev->dev, "memory resource missing\n");
return -ENODEV;
}
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- dev_err(&pdev->dev, "platform data is NULL\n");
- return -EINVAL;
- }
-
stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL);
if (!stdev) {
dev_err(&pdev->dev, "kzalloc fail\n");
goto put_clk;
}
- stdev->flags = pdata->thermal_flags;
+ stdev->flags = val;
writel_relaxed(stdev->flags, stdev->thermal_base);
- spear_thermal = thermal_zone_device_register("spear_thermal", 0,
+ spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0,
stdev, &ops, 0, 0, 0, 0);
if (IS_ERR(spear_thermal)) {
dev_err(&pdev->dev, "thermal zone device is NULL\n");
return 0;
}
+static const struct of_device_id spear_thermal_id_table[] = {
+ { .compatible = "st,thermal-spear1340" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spear_thermal_id_table);
+
static struct platform_driver spear_thermal_driver = {
.probe = spear_thermal_probe,
.remove = spear_thermal_exit,
.name = "spear_thermal",
.owner = THIS_MODULE,
.pm = &spear_thermal_pm_ops,
+ .of_match_table = of_match_ptr(spear_thermal_id_table),
},
};
}
}
+static ssize_t
+trip_point_temp_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ unsigned long temperature;
+
+ if (!tz->ops->set_trip_temp)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
+ return -EINVAL;
+
+ if (kstrtoul(buf, 10, &temperature))
+ return -EINVAL;
+
+ ret = tz->ops->set_trip_temp(tz, trip, temperature);
+
+ return ret ? ret : count;
+}
+
static ssize_t
trip_point_temp_show(struct device *dev, struct device_attribute *attr,
char *buf)
return sprintf(buf, "%ld\n", temperature);
}
+static ssize_t
+trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ unsigned long temperature;
+
+ if (!tz->ops->set_trip_hyst)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
+ return -EINVAL;
+
+ if (kstrtoul(buf, 10, &temperature))
+ return -EINVAL;
+
+ /*
+ * We are not doing any check on the 'temperature' value
+ * here. The driver implementing 'set_trip_hyst' has to
+ * take care of this.
+ */
+ ret = tz->ops->set_trip_hyst(tz, trip, temperature);
+
+ return ret ? ret : count;
+}
+
+static ssize_t
+trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ unsigned long temperature;
+
+ if (!tz->ops->get_trip_hyst)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
+ return -EINVAL;
+
+ ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
+
+ return ret ? ret : sprintf(buf, "%ld\n", temperature);
+}
+
static ssize_t
passive_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store);
-static struct device_attribute trip_point_attrs[] = {
- __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_0_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_1_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_1_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_2_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_2_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_3_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_3_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_4_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_4_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_5_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_5_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_6_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_6_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_7_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_7_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_8_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_10_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_10_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_11_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL),
-};
-
/* sys I/F for cooling device */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
}
EXPORT_SYMBOL(thermal_zone_device_update);
+/**
+ * create_trip_attrs - create attributes for trip points
+ * @tz: the thermal zone device
+ * @mask: Writeable trip point bitmap.
+ */
+static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
+{
+ int indx;
+ int size = sizeof(struct thermal_attr) * tz->trips;
+
+ tz->trip_type_attrs = kzalloc(size, GFP_KERNEL);
+ if (!tz->trip_type_attrs)
+ return -ENOMEM;
+
+ tz->trip_temp_attrs = kzalloc(size, GFP_KERNEL);
+ if (!tz->trip_temp_attrs) {
+ kfree(tz->trip_type_attrs);
+ return -ENOMEM;
+ }
+
+ if (tz->ops->get_trip_hyst) {
+ tz->trip_hyst_attrs = kzalloc(size, GFP_KERNEL);
+ if (!tz->trip_hyst_attrs) {
+ kfree(tz->trip_type_attrs);
+ kfree(tz->trip_temp_attrs);
+ return -ENOMEM;
+ }
+ }
+
+
+ for (indx = 0; indx < tz->trips; indx++) {
+ /* create trip type attribute */
+ snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_type", indx);
+
+ sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
+ tz->trip_type_attrs[indx].attr.attr.name =
+ tz->trip_type_attrs[indx].name;
+ tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
+
+ device_create_file(&tz->device,
+ &tz->trip_type_attrs[indx].attr);
+
+ /* create trip temp attribute */
+ snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_temp", indx);
+
+ sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
+ tz->trip_temp_attrs[indx].attr.attr.name =
+ tz->trip_temp_attrs[indx].name;
+ tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
+ if (mask & (1 << indx)) {
+ tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
+ tz->trip_temp_attrs[indx].attr.store =
+ trip_point_temp_store;
+ }
+
+ device_create_file(&tz->device,
+ &tz->trip_temp_attrs[indx].attr);
+
+ /* create Optional trip hyst attribute */
+ if (!tz->ops->get_trip_hyst)
+ continue;
+ snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_hyst", indx);
+
+ sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
+ tz->trip_hyst_attrs[indx].attr.attr.name =
+ tz->trip_hyst_attrs[indx].name;
+ tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
+ if (tz->ops->set_trip_hyst) {
+ tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
+ tz->trip_hyst_attrs[indx].attr.store =
+ trip_point_hyst_store;
+ }
+
+ device_create_file(&tz->device,
+ &tz->trip_hyst_attrs[indx].attr);
+ }
+ return 0;
+}
+
+static void remove_trip_attrs(struct thermal_zone_device *tz)
+{
+ int indx;
+
+ for (indx = 0; indx < tz->trips; indx++) {
+ device_remove_file(&tz->device,
+ &tz->trip_type_attrs[indx].attr);
+ device_remove_file(&tz->device,
+ &tz->trip_temp_attrs[indx].attr);
+ if (tz->ops->get_trip_hyst)
+ device_remove_file(&tz->device,
+ &tz->trip_hyst_attrs[indx].attr);
+ }
+ kfree(tz->trip_type_attrs);
+ kfree(tz->trip_temp_attrs);
+ kfree(tz->trip_hyst_attrs);
+}
+
/**
* thermal_zone_device_register - register a new thermal zone device
* @type: the thermal zone device type
* @trips: the number of trip points the thermal zone support
+ * @mask: a bit string indicating the writeablility of trip points
* @devdata: private device data
* @ops: standard thermal zone device callbacks
* @tc1: thermal coefficient 1 for passive calculations
* section 11.1.5.1 of the ACPI specification 3.0.
*/
struct thermal_zone_device *thermal_zone_device_register(char *type,
- int trips, void *devdata,
+ int trips, int mask, void *devdata,
const struct thermal_zone_device_ops *ops,
int tc1, int tc2, int passive_delay, int polling_delay)
{
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
- if (trips > THERMAL_MAX_TRIPS || trips < 0)
+ if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips)
return ERR_PTR(-EINVAL);
if (!ops || !ops->get_temp)
goto unregister;
}
+ result = create_trip_attrs(tz, mask);
+ if (result)
+ goto unregister;
+
for (count = 0; count < trips; count++) {
- result = device_create_file(&tz->device,
- &trip_point_attrs[count * 2]);
- if (result)
- break;
- result = device_create_file(&tz->device,
- &trip_point_attrs[count * 2 + 1]);
- if (result)
- goto unregister;
tz->ops->get_trip_type(tz, count, &trip_type);
if (trip_type == THERMAL_TRIP_PASSIVE)
passive = 1;
{
struct thermal_cooling_device *cdev;
struct thermal_zone_device *pos = NULL;
- int count;
if (!tz)
return;
device_remove_file(&tz->device, &dev_attr_temp);
if (tz->ops->get_mode)
device_remove_file(&tz->device, &dev_attr_mode);
+ remove_trip_attrs(tz);
- for (count = 0; count < tz->trips; count++) {
- device_remove_file(&tz->device,
- &trip_point_attrs[count * 2]);
- device_remove_file(&tz->device,
- &trip_point_attrs[count * 2 + 1]);
- }
thermal_remove_hwmon_sysfs(tz);
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
idr_destroy(&tz->idr);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define AE_CODE_ACPI_TABLES 0x2000
#define AE_CODE_AML 0x3000
#define AE_CODE_CONTROL 0x4000
+#define AE_CODE_MAX 0x4000
#define AE_CODE_MASK 0xF000
#define ACPI_SUCCESS(a) (!(a))
/* Exception strings for acpi_format_exception */
-#ifdef DEFINE_ACPI_GLOBALS
+#ifdef ACPI_DEFINE_EXCEPTION_TABLE
/*
* String versions of the exception codes above
"AE_CTRL_PARSE_PENDING"
};
-#endif /* ACPI GLOBALS */
+#endif /* EXCEPTION_TABLE */
#endif /* __ACEXCEP_H__ */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_WARNING(plist) acpi_warning plist
#define ACPI_EXCEPTION(plist) acpi_exception plist
#define ACPI_ERROR(plist) acpi_error plist
+#define ACPI_BIOS_WARNING(plist) acpi_bios_warning plist
+#define ACPI_BIOS_ERROR(plist) acpi_bios_error plist
#define ACPI_DEBUG_OBJECT(obj,l,i) acpi_ex_do_debug_object(obj,l,i)
#else
#define ACPI_WARNING(plist)
#define ACPI_EXCEPTION(plist)
#define ACPI_ERROR(plist)
+#define ACPI_BIOS_WARNING(plist)
+#define ACPI_BIOS_ERROR(plist)
#define ACPI_DEBUG_OBJECT(obj,l,i)
#endif /* ACPI_NO_ERROR_MESSAGES */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
acpi_string pathname,
struct acpi_object_list *arguments,
struct acpi_handle_list *list);
+acpi_status
+acpi_evaluate_hotplug_ost(acpi_handle handle, u32 source_event,
+ u32 status_code, struct acpi_buffer *status_buf);
struct acpi_pld {
unsigned int revision:7; /* 0 */
u32 suprise_removal_ok:1;
u32 power_manageable:1;
u32 performance_manageable:1;
- u32 reserved:24;
+ u32 eject_pending:1;
+ u32 reserved:23;
};
/* File System */
u32 data;
};
+struct acpi_eject_event {
+ acpi_handle handle;
+ u32 event;
+};
+
extern struct kobject *acpi_kobj;
extern int acpi_bus_generate_netlink_event(const char*, const char*, u8, int);
void acpi_bus_private_data_handler(acpi_handle, void *);
void acpi_bus_unregister_driver(struct acpi_driver *driver);
int acpi_bus_add(struct acpi_device **child, struct acpi_device *parent,
acpi_handle handle, int type);
+void acpi_bus_hot_remove_device(void *context);
int acpi_bus_trim(struct acpi_device *start, int rmdevice);
int acpi_bus_start(struct acpi_device *device);
acpi_status acpi_bus_get_ejd(acpi_handle handle, acpi_handle * ejd);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
acpi_status
acpi_os_hotplug_execute(acpi_osd_exec_callback function, void *context);
-void acpi_os_wait_events_complete(void *context);
+void acpi_os_wait_events_complete(void);
void acpi_os_sleep(u64 milliseconds);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20120320
+#define ACPI_CA_VERSION 0x20120711
#include "acconfig.h"
#include "actypes.h"
void acpi_free(void *address);
/*
- * ACPI table manipulation interfaces
+ * ACPI table load/unload interfaces
*/
-acpi_status acpi_reallocate_root_table(void);
+acpi_status acpi_load_table(struct acpi_table_header *table);
-acpi_status acpi_find_root_pointer(acpi_size *rsdp_address);
+acpi_status acpi_unload_parent_table(acpi_handle object);
acpi_status acpi_load_tables(void);
-acpi_status acpi_load_table(struct acpi_table_header *table_ptr);
+/*
+ * ACPI table manipulation interfaces
+ */
+acpi_status acpi_reallocate_root_table(void);
+
+acpi_status acpi_find_root_pointer(acpi_size *rsdp_address);
acpi_status acpi_unload_table_id(acpi_owner_id id);
acpi_info(const char *module_name,
u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_error(const char *module_name,
+ u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_warning(const char *module_name,
+ u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+
/*
* Debug output
*/
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* Definitions for Resource Attributes
*/
typedef u16 acpi_rs_length; /* Resource Length field is fixed at 16 bits */
-typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (64_k-1)+3 */
+typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (64K-1)+3 */
/*
* Memory Attributes
};
struct acpi_resource_extended_address64 {
- ACPI_RESOURCE_ADDRESS_COMMON u8 revision_iD;
+ ACPI_RESOURCE_ADDRESS_COMMON u8 revision_ID;
u64 granularity;
u64 minimum;
u64 maximum;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
u32 smi_command; /* 32-bit Port address of SMI command port */
u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
- u8 S4bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
+ u8 s4_bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
u8 pstate_control; /* Processor performance state control */
u32 pm1a_event_block; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
u32 pm1b_event_block; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */
u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */
u8 cst_control; /* Support for the _CST object and C States change notification */
- u16 C2latency; /* Worst case HW latency to enter/exit C2 state */
- u16 C3latency; /* Worst case HW latency to enter/exit C3 state */
+ u16 c2_latency; /* Worst case HW latency to enter/exit C2 state */
+ u16 c3_latency; /* Worst case HW latency to enter/exit C3 state */
u16 flush_size; /* Processor's memory cache line width, in bytes */
u16 flush_stride; /* Number of flush strides that need to be read */
u8 duty_offset; /* Processor duty cycle index in processor's P_CNT reg */
#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
-#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */
+#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
#define ACPI_FADT_HW_REDUCED (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
#define ACPI_FADT_LOW_POWER_S0 (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
struct acpi_madt_io_apic {
struct acpi_subtable_header header;
u8 id; /* I/O APIC ID */
- u8 reserved; /* Reserved - must be zero */
+ u8 reserved; /* reserved - must be zero */
u32 address; /* APIC physical address */
u32 global_irq_base; /* Global system interrupt where INTI lines start */
};
struct acpi_madt_generic_distributor {
struct acpi_subtable_header header;
- u16 reserved; /* Reserved - must be zero */
+ u16 reserved; /* reserved - must be zero */
u32 gic_id;
u64 base_address;
u32 global_irq_base;
- u32 reserved2; /* Reserved - must be zero */
+ u32 reserved2; /* reserved - must be zero */
};
/*
u64 max_address; /* Max physical address in system */
};
-/* Subtable - Maximum Proximity Domain Information. Version 1 */
+/* subtable - Maximum Proximity Domain Information. Version 1 */
struct acpi_msct_proximity {
u8 revision;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */
#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */
#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */
-#define ACPI_SIG_IBFT "IBFT" /* i_sCSI Boot Firmware Table */
+#define ACPI_SIG_IBFT "IBFT" /* iSCSI Boot Firmware Table */
#define ACPI_SIG_IVRS "IVRS" /* I/O Virtualization Reporting Structure */
#define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */
#define ACPI_SIG_MCHI "MCHI" /* Management Controller Host Interface table */
struct acpi_dmar_header header;
u16 reserved;
u16 segment;
- u64 base_address; /* 4_k aligned base address */
- u64 end_address; /* 4_k aligned limit address */
+ u64 base_address; /* 4K aligned base address */
+ u64 end_address; /* 4K aligned limit address */
};
/* Masks for Flags field above */
/* Masks for Info field above */
#define ACPI_IVHD_MSI_NUMBER_MASK 0x001F /* 5 bits, MSI message number */
-#define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, unit_iD */
+#define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, unit_ID */
/*
* Device Entries for IVHD subtable, appear after struct acpi_ivrs_hardware structure.
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* to indicate that special precautions must be taken to avoid alignment faults.
* (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
*
- * Note: Em64_t and other X86-64 processors support misaligned transfers,
+ * Note: EM64T and other X86-64 processors support misaligned transfers,
* so there is no need to define this flag.
*/
#if defined (__IA64__) || defined (__ia64__)
#define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1
/*
- * Event Status - Per event
+ * Event status - Per event
* -------------
* The encoding of acpi_event_status is illustrated below.
* Note that a set bit (1) indicates the property is TRUE
#define ACPI_DEVICE_NOTIFY 0x2
#define ACPI_ALL_NOTIFY (ACPI_SYSTEM_NOTIFY | ACPI_DEVICE_NOTIFY)
#define ACPI_MAX_NOTIFY_HANDLER_TYPE 0x3
+#define ACPI_NUM_NOTIFY_TYPES 2
#define ACPI_MAX_SYS_NOTIFY 0x7F
#define ACPI_MAX_DEVICE_SPECIFIC_NOTIFY 0xBF
+#define ACPI_SYSTEM_HANDLER_LIST 0 /* Used as index, must be SYSTEM_NOTIFY -1 */
+#define ACPI_DEVICE_HANDLER_LIST 1 /* Used as index, must be DEVICE_NOTIFY -1 */
+
/* Address Space (Operation Region) Types */
typedef u8 acpi_adr_space_type;
#define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7
#define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8
#define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9
+#define ACPI_ADR_SPACE_PLATFORM_COMM (acpi_adr_space_type) 10
-#define ACPI_NUM_PREDEFINED_REGIONS 10
+#define ACPI_NUM_PREDEFINED_REGIONS 11
/*
* Special Address Spaces
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define OSC_SB_PAD_SUPPORT 1
#define OSC_SB_PPC_OST_SUPPORT 2
#define OSC_SB_PR3_SUPPORT 4
-#define OSC_SB_CPUHP_OST_SUPPORT 8
+#define OSC_SB_HOTPLUG_OST_SUPPORT 8
#define OSC_SB_APEI_SUPPORT 16
extern bool osc_sb_apei_support_acked;
extern acpi_status acpi_pci_osc_control_set(acpi_handle handle,
u32 *mask, u32 req);
+
+/* Enable _OST when all relevant hotplug operations are enabled */
+#if defined(CONFIG_ACPI_HOTPLUG_CPU) && \
+ (defined(CONFIG_ACPI_HOTPLUG_MEMORY) || \
+ defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)) && \
+ (defined(CONFIG_ACPI_CONTAINER) || \
+ defined(CONFIG_ACPI_CONTAINER_MODULE))
+#define ACPI_HOTPLUG_OST
+#endif
+
+/* _OST Source Event Code (OSPM Action) */
+#define ACPI_OST_EC_OSPM_SHUTDOWN 0x100
+#define ACPI_OST_EC_OSPM_EJECT 0x103
+#define ACPI_OST_EC_OSPM_INSERTION 0x200
+
+/* _OST General Processing Status Code */
+#define ACPI_OST_SC_SUCCESS 0x0
+#define ACPI_OST_SC_NON_SPECIFIC_FAILURE 0x1
+#define ACPI_OST_SC_UNRECOGNIZED_NOTIFY 0x2
+
+/* _OST OS Shutdown Processing (0x100) Status Code */
+#define ACPI_OST_SC_OS_SHUTDOWN_DENIED 0x80
+#define ACPI_OST_SC_OS_SHUTDOWN_IN_PROGRESS 0x81
+#define ACPI_OST_SC_OS_SHUTDOWN_COMPLETED 0x82
+#define ACPI_OST_SC_OS_SHUTDOWN_NOT_SUPPORTED 0x83
+
+/* _OST Ejection Request (0x3, 0x103) Status Code */
+#define ACPI_OST_SC_EJECT_NOT_SUPPORTED 0x80
+#define ACPI_OST_SC_DEVICE_IN_USE 0x81
+#define ACPI_OST_SC_DEVICE_BUSY 0x82
+#define ACPI_OST_SC_EJECT_DEPENDENCY_BUSY 0x83
+#define ACPI_OST_SC_EJECT_IN_PROGRESS 0x84
+
+/* _OST Insertion Request (0x200) Status Code */
+#define ACPI_OST_SC_INSERT_IN_PROGRESS 0x80
+#define ACPI_OST_SC_DRIVER_LOAD_FAILURE 0x81
+#define ACPI_OST_SC_INSERT_NOT_SUPPORTED 0x82
+
extern void acpi_early_init(void);
extern int acpi_nvs_register(__u64 start, __u64 size);
/* Idle State Flags */
#define CPUIDLE_FLAG_TIME_VALID (0x01) /* is residency time measurable? */
+#define CPUIDLE_FLAG_COUPLED (0x02) /* state applies to multiple cpus */
#define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
struct list_head device_list;
struct kobject kobj;
struct completion kobj_unregister;
+
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
+ int safe_state_index;
+ cpumask_t coupled_cpus;
+ struct cpuidle_coupled *coupled;
+#endif
};
DECLARE_PER_CPU(struct cpuidle_device *, cpuidle_devices);
#endif
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
+void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a);
+#endif
+
/******************************
* CPUIDLE GOVERNOR INTERFACE *
******************************/
+++ /dev/null
-/*
- * SPEAr thermal driver platform data.
- *
- * Copyright (C) 2011-2012 ST Microelectronics
- * Author: Vincenzo Frascino <vincenzo.frascino@st.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef SPEAR_THERMAL_H
-#define SPEAR_THERMAL_H
-
-/* SPEAr Thermal Sensor Platform Data */
-struct spear_thermal_pdata {
- /* flags used to enable thermal sensor */
- unsigned int thermal_flags;
-};
-
-#endif /* SPEAR_THERMAL_H */
enum thermal_trip_type *);
int (*get_trip_temp) (struct thermal_zone_device *, int,
unsigned long *);
+ int (*set_trip_temp) (struct thermal_zone_device *, int,
+ unsigned long);
+ int (*get_trip_hyst) (struct thermal_zone_device *, int,
+ unsigned long *);
+ int (*set_trip_hyst) (struct thermal_zone_device *, int,
+ unsigned long);
int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *);
int (*notify) (struct thermal_zone_device *, int,
enum thermal_trip_type);
((long)t-2732+5)/10 : ((long)t-2732-5)/10)
#define CELSIUS_TO_KELVIN(t) ((t)*10+2732)
+struct thermal_attr {
+ struct device_attribute attr;
+ char name[THERMAL_NAME_LENGTH];
+};
+
struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
struct device device;
+ struct thermal_attr *trip_temp_attrs;
+ struct thermal_attr *trip_type_attrs;
+ struct thermal_attr *trip_hyst_attrs;
void *devdata;
int trips;
int tc1;
};
#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)
-struct thermal_zone_device *thermal_zone_device_register(char *, int, void *,
- const struct thermal_zone_device_ops *, int tc1, int tc2,
- int passive_freq, int polling_freq);
+struct thermal_zone_device *thermal_zone_device_register(char *, int, int,
+ void *, const struct thermal_zone_device_ops *, int tc1,
+ int tc2, int passive_freq, int polling_freq);
void thermal_zone_device_unregister(struct thermal_zone_device *);
int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
turbostat : turbostat.c
+CFLAGS += -Wall
clean :
rm -f turbostat
on processors that additionally support C-state residency counters.
.SS Options
-The \fB-s\fP option prints only a 1-line summary for each sample interval.
+The \fB-s\fP option limits output to a 1-line system summary for each interval.
+.PP
+The \fB-c\fP option limits output to the 1st thread in each core.
+.PP
+The \fB-p\fP option limits output to the 1st thread in each package.
.PP
The \fB-v\fP option increases verbosity.
.PP
.nf
[root@x980]# ./turbostat
cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 0.60 1.63 3.38 2.91 0.00 96.49 0.00 76.64
- 0 0 0.59 1.62 3.38 4.51 0.00 94.90 0.00 76.64
- 0 6 1.13 1.64 3.38 3.97 0.00 94.90 0.00 76.64
- 1 2 0.08 1.62 3.38 0.07 0.00 99.85 0.00 76.64
- 1 8 0.03 1.62 3.38 0.12 0.00 99.85 0.00 76.64
- 2 4 0.01 1.62 3.38 0.06 0.00 99.93 0.00 76.64
- 2 10 0.04 1.62 3.38 0.02 0.00 99.93 0.00 76.64
- 8 1 2.85 1.62 3.38 11.71 0.00 85.44 0.00 76.64
- 8 7 1.98 1.62 3.38 12.58 0.00 85.44 0.00 76.64
- 9 3 0.36 1.62 3.38 0.71 0.00 98.93 0.00 76.64
- 9 9 0.09 1.62 3.38 0.98 0.00 98.93 0.00 76.64
- 10 5 0.03 1.62 3.38 0.09 0.00 99.87 0.00 76.64
- 10 11 0.07 1.62 3.38 0.06 0.00 99.87 0.00 76.64
+ 0.09 1.62 3.38 1.83 0.32 97.76 1.26 83.61
+ 0 0 0.15 1.62 3.38 10.23 0.05 89.56 1.26 83.61
+ 0 6 0.05 1.62 3.38 10.34
+ 1 2 0.03 1.62 3.38 0.07 0.05 99.86
+ 1 8 0.03 1.62 3.38 0.06
+ 2 4 0.21 1.62 3.38 0.10 1.49 98.21
+ 2 10 0.02 1.62 3.38 0.29
+ 8 1 0.04 1.62 3.38 0.04 0.08 99.84
+ 8 7 0.01 1.62 3.38 0.06
+ 9 3 0.53 1.62 3.38 0.10 0.20 99.17
+ 9 9 0.02 1.62 3.38 0.60
+ 10 5 0.01 1.62 3.38 0.02 0.04 99.92
+ 10 11 0.02 1.62 3.38 0.02
.fi
.SH SUMMARY EXAMPLE
The "-s" option prints the column headers just once,
.nf
[root@x980]# ./turbostat -s
%c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 0.61 1.89 3.38 5.95 0.00 93.44 0.00 66.33
- 0.52 1.62 3.38 6.83 0.00 92.65 0.00 61.11
- 0.62 1.92 3.38 5.47 0.00 93.91 0.00 67.31
+ 0.23 1.67 3.38 2.00 0.30 97.47 1.07 82.12
+ 0.10 1.62 3.38 1.87 2.25 95.77 12.02 72.60
+ 0.20 1.64 3.38 1.98 0.11 97.72 0.30 83.36
+ 0.11 1.70 3.38 1.86 1.81 96.22 9.71 74.90
.fi
.SH VERBOSE EXAMPLE
The "-v" option adds verbosity to the output:
[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
^C
cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 8.63 3.64 3.38 14.46 0.49 76.42 0.00 0.00
- 0 0 0.34 3.36 3.38 99.66 0.00 0.00 0.00 0.00
- 0 6 99.96 3.64 3.38 0.04 0.00 0.00 0.00 0.00
- 1 2 0.14 3.50 3.38 1.75 2.04 96.07 0.00 0.00
- 1 8 0.38 3.57 3.38 1.51 2.04 96.07 0.00 0.00
- 2 4 0.01 2.65 3.38 0.06 0.00 99.93 0.00 0.00
- 2 10 0.03 2.12 3.38 0.04 0.00 99.93 0.00 0.00
- 8 1 0.91 3.59 3.38 35.27 0.92 62.90 0.00 0.00
- 8 7 1.61 3.63 3.38 34.57 0.92 62.90 0.00 0.00
- 9 3 0.04 3.38 3.38 0.20 0.00 99.76 0.00 0.00
- 9 9 0.04 3.29 3.38 0.20 0.00 99.76 0.00 0.00
- 10 5 0.03 3.08 3.38 0.12 0.00 99.85 0.00 0.00
- 10 11 0.05 3.07 3.38 0.10 0.00 99.85 0.00 0.00
-4.907015 sec
-
+ 8.86 3.61 3.38 15.06 31.19 44.89 0.00 0.00
+ 0 0 1.46 3.22 3.38 16.84 29.48 52.22 0.00 0.00
+ 0 6 0.21 3.06 3.38 18.09
+ 1 2 0.53 3.33 3.38 2.80 46.40 50.27
+ 1 8 0.89 3.47 3.38 2.44
+ 2 4 1.36 3.43 3.38 9.04 23.71 65.89
+ 2 10 0.18 2.86 3.38 10.22
+ 8 1 0.04 2.87 3.38 99.96 0.01 0.00
+ 8 7 99.72 3.63 3.38 0.27
+ 9 3 0.31 3.21 3.38 7.64 56.55 35.50
+ 9 9 0.08 2.95 3.38 7.88
+ 10 5 1.42 3.43 3.38 2.14 30.99 65.44
+ 10 11 0.16 2.88 3.38 3.40
.fi
-Above the cycle soaker drives cpu6 up 3.6 Ghz turbo limit
+Above the cycle soaker drives cpu7 up its 3.6 Ghz turbo limit
while the other processors are generally in various states of idle.
-Note that cpu0 is an HT sibling sharing core0
-with cpu6, and thus it is unable to get to an idle state
-deeper than c1 while cpu6 is busy.
+Note that cpu1 and cpu7 are HT siblings within core8.
+As cpu7 is very busy, it prevents its sibling, cpu1,
+from entering a c-state deeper than c1.
-Note that turbostat reports average GHz of 3.64, while
+Note that turbostat reports average GHz of 3.63, while
the arithmetic average of the GHz column above is lower.
This is a weighted average, where the weight is %c0. ie. it is the total number of
un-halted cycles elapsed per time divided by the number of CPUs.
unsigned int show_pkg;
unsigned int show_core;
unsigned int show_cpu;
+unsigned int show_pkg_only;
+unsigned int show_core_only;
+char *output_buffer, *outp;
int aperf_mperf_unstable;
int backwards_count;
char *progname;
-int num_cpus;
-cpu_set_t *cpu_present_set, *cpu_mask;
-size_t cpu_present_setsize, cpu_mask_size;
-
-struct counters {
- unsigned long long tsc; /* per thread */
- unsigned long long aperf; /* per thread */
- unsigned long long mperf; /* per thread */
- unsigned long long c1; /* per thread (calculated) */
- unsigned long long c3; /* per core */
- unsigned long long c6; /* per core */
- unsigned long long c7; /* per core */
- unsigned long long pc2; /* per package */
- unsigned long long pc3; /* per package */
- unsigned long long pc6; /* per package */
- unsigned long long pc7; /* per package */
- unsigned long long extra_msr; /* per thread */
- int pkg;
- int core;
- int cpu;
- struct counters *next;
-};
-
-struct counters *cnt_even;
-struct counters *cnt_odd;
-struct counters *cnt_delta;
-struct counters *cnt_average;
-struct timeval tv_even;
-struct timeval tv_odd;
-struct timeval tv_delta;
-
-int mark_cpu_present(int pkg, int core, int cpu)
+cpu_set_t *cpu_present_set, *cpu_affinity_set;
+size_t cpu_present_setsize, cpu_affinity_setsize;
+
+struct thread_data {
+ unsigned long long tsc;
+ unsigned long long aperf;
+ unsigned long long mperf;
+ unsigned long long c1; /* derived */
+ unsigned long long extra_msr;
+ unsigned int cpu_id;
+ unsigned int flags;
+#define CPU_IS_FIRST_THREAD_IN_CORE 0x2
+#define CPU_IS_FIRST_CORE_IN_PACKAGE 0x4
+} *thread_even, *thread_odd;
+
+struct core_data {
+ unsigned long long c3;
+ unsigned long long c6;
+ unsigned long long c7;
+ unsigned int core_id;
+} *core_even, *core_odd;
+
+struct pkg_data {
+ unsigned long long pc2;
+ unsigned long long pc3;
+ unsigned long long pc6;
+ unsigned long long pc7;
+ unsigned int package_id;
+} *package_even, *package_odd;
+
+#define ODD_COUNTERS thread_odd, core_odd, package_odd
+#define EVEN_COUNTERS thread_even, core_even, package_even
+
+#define GET_THREAD(thread_base, thread_no, core_no, pkg_no) \
+ (thread_base + (pkg_no) * topo.num_cores_per_pkg * \
+ topo.num_threads_per_core + \
+ (core_no) * topo.num_threads_per_core + (thread_no))
+#define GET_CORE(core_base, core_no, pkg_no) \
+ (core_base + (pkg_no) * topo.num_cores_per_pkg + (core_no))
+#define GET_PKG(pkg_base, pkg_no) (pkg_base + pkg_no)
+
+struct system_summary {
+ struct thread_data threads;
+ struct core_data cores;
+ struct pkg_data packages;
+} sum, average;
+
+
+struct topo_params {
+ int num_packages;
+ int num_cpus;
+ int num_cores;
+ int max_cpu_num;
+ int num_cores_per_pkg;
+ int num_threads_per_core;
+} topo;
+
+struct timeval tv_even, tv_odd, tv_delta;
+
+void setup_all_buffers(void);
+
+int cpu_is_not_present(int cpu)
{
- CPU_SET_S(cpu, cpu_present_setsize, cpu_present_set);
- return 0;
+ return !CPU_ISSET_S(cpu, cpu_present_setsize, cpu_present_set);
}
-
/*
- * cpu_mask_init(ncpus)
- *
- * allocate and clear cpu_mask
- * set cpu_mask_size
+ * run func(thread, core, package) in topology order
+ * skip non-present cpus
*/
-void cpu_mask_init(int ncpus)
+
+int for_all_cpus(int (func)(struct thread_data *, struct core_data *, struct pkg_data *),
+ struct thread_data *thread_base, struct core_data *core_base, struct pkg_data *pkg_base)
{
- cpu_mask = CPU_ALLOC(ncpus);
- if (cpu_mask == NULL) {
- perror("CPU_ALLOC");
- exit(3);
- }
- cpu_mask_size = CPU_ALLOC_SIZE(ncpus);
- CPU_ZERO_S(cpu_mask_size, cpu_mask);
+ int retval, pkg_no, core_no, thread_no;
- /*
- * Allocate and initialize cpu_present_set
- */
- cpu_present_set = CPU_ALLOC(ncpus);
- if (cpu_present_set == NULL) {
- perror("CPU_ALLOC");
- exit(3);
- }
- cpu_present_setsize = CPU_ALLOC_SIZE(ncpus);
- CPU_ZERO_S(cpu_present_setsize, cpu_present_set);
- for_all_cpus(mark_cpu_present);
-}
+ for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) {
+ for (core_no = 0; core_no < topo.num_cores_per_pkg; ++core_no) {
+ for (thread_no = 0; thread_no <
+ topo.num_threads_per_core; ++thread_no) {
+ struct thread_data *t;
+ struct core_data *c;
+ struct pkg_data *p;
-void cpu_mask_uninit()
-{
- CPU_FREE(cpu_mask);
- cpu_mask = NULL;
- cpu_mask_size = 0;
- CPU_FREE(cpu_present_set);
- cpu_present_set = NULL;
- cpu_present_setsize = 0;
+ t = GET_THREAD(thread_base, thread_no, core_no, pkg_no);
+
+ if (cpu_is_not_present(t->cpu_id))
+ continue;
+
+ c = GET_CORE(core_base, core_no, pkg_no);
+ p = GET_PKG(pkg_base, pkg_no);
+
+ retval = func(t, c, p);
+ if (retval)
+ return retval;
+ }
+ }
+ }
+ return 0;
}
int cpu_migrate(int cpu)
{
- CPU_ZERO_S(cpu_mask_size, cpu_mask);
- CPU_SET_S(cpu, cpu_mask_size, cpu_mask);
- if (sched_setaffinity(0, cpu_mask_size, cpu_mask) == -1)
+ CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set);
+ CPU_SET_S(cpu, cpu_affinity_setsize, cpu_affinity_set);
+ if (sched_setaffinity(0, cpu_affinity_setsize, cpu_affinity_set) == -1)
return -1;
else
return 0;
void print_header(void)
{
if (show_pkg)
- fprintf(stderr, "pk");
+ outp += sprintf(outp, "pk");
if (show_pkg)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_core)
- fprintf(stderr, "cor");
+ outp += sprintf(outp, "cor");
if (show_cpu)
- fprintf(stderr, " CPU");
+ outp += sprintf(outp, " CPU");
if (show_pkg || show_core || show_cpu)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (do_nhm_cstates)
- fprintf(stderr, " %%c0");
+ outp += sprintf(outp, " %%c0");
if (has_aperf)
- fprintf(stderr, " GHz");
- fprintf(stderr, " TSC");
+ outp += sprintf(outp, " GHz");
+ outp += sprintf(outp, " TSC");
if (do_nhm_cstates)
- fprintf(stderr, " %%c1");
+ outp += sprintf(outp, " %%c1");
if (do_nhm_cstates)
- fprintf(stderr, " %%c3");
+ outp += sprintf(outp, " %%c3");
if (do_nhm_cstates)
- fprintf(stderr, " %%c6");
+ outp += sprintf(outp, " %%c6");
if (do_snb_cstates)
- fprintf(stderr, " %%c7");
+ outp += sprintf(outp, " %%c7");
if (do_snb_cstates)
- fprintf(stderr, " %%pc2");
+ outp += sprintf(outp, " %%pc2");
if (do_nhm_cstates)
- fprintf(stderr, " %%pc3");
+ outp += sprintf(outp, " %%pc3");
if (do_nhm_cstates)
- fprintf(stderr, " %%pc6");
+ outp += sprintf(outp, " %%pc6");
if (do_snb_cstates)
- fprintf(stderr, " %%pc7");
+ outp += sprintf(outp, " %%pc7");
if (extra_msr_offset)
- fprintf(stderr, " MSR 0x%x ", extra_msr_offset);
+ outp += sprintf(outp, " MSR 0x%x ", extra_msr_offset);
- putc('\n', stderr);
+ outp += sprintf(outp, "\n");
}
-void dump_cnt(struct counters *cnt)
+int dump_counters(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
{
- if (!cnt)
- return;
- if (cnt->pkg) fprintf(stderr, "package: %d ", cnt->pkg);
- if (cnt->core) fprintf(stderr, "core:: %d ", cnt->core);
- if (cnt->cpu) fprintf(stderr, "CPU: %d ", cnt->cpu);
- if (cnt->tsc) fprintf(stderr, "TSC: %016llX\n", cnt->tsc);
- if (cnt->c3) fprintf(stderr, "c3: %016llX\n", cnt->c3);
- if (cnt->c6) fprintf(stderr, "c6: %016llX\n", cnt->c6);
- if (cnt->c7) fprintf(stderr, "c7: %016llX\n", cnt->c7);
- if (cnt->aperf) fprintf(stderr, "aperf: %016llX\n", cnt->aperf);
- if (cnt->pc2) fprintf(stderr, "pc2: %016llX\n", cnt->pc2);
- if (cnt->pc3) fprintf(stderr, "pc3: %016llX\n", cnt->pc3);
- if (cnt->pc6) fprintf(stderr, "pc6: %016llX\n", cnt->pc6);
- if (cnt->pc7) fprintf(stderr, "pc7: %016llX\n", cnt->pc7);
- if (cnt->extra_msr) fprintf(stderr, "msr0x%x: %016llX\n", extra_msr_offset, cnt->extra_msr);
-}
+ fprintf(stderr, "t %p, c %p, p %p\n", t, c, p);
+
+ if (t) {
+ fprintf(stderr, "CPU: %d flags 0x%x\n", t->cpu_id, t->flags);
+ fprintf(stderr, "TSC: %016llX\n", t->tsc);
+ fprintf(stderr, "aperf: %016llX\n", t->aperf);
+ fprintf(stderr, "mperf: %016llX\n", t->mperf);
+ fprintf(stderr, "c1: %016llX\n", t->c1);
+ fprintf(stderr, "msr0x%x: %016llX\n",
+ extra_msr_offset, t->extra_msr);
+ }
-void dump_list(struct counters *cnt)
-{
- printf("dump_list 0x%p\n", cnt);
+ if (c) {
+ fprintf(stderr, "core: %d\n", c->core_id);
+ fprintf(stderr, "c3: %016llX\n", c->c3);
+ fprintf(stderr, "c6: %016llX\n", c->c6);
+ fprintf(stderr, "c7: %016llX\n", c->c7);
+ }
- for (; cnt; cnt = cnt->next)
- dump_cnt(cnt);
+ if (p) {
+ fprintf(stderr, "package: %d\n", p->package_id);
+ fprintf(stderr, "pc2: %016llX\n", p->pc2);
+ fprintf(stderr, "pc3: %016llX\n", p->pc3);
+ fprintf(stderr, "pc6: %016llX\n", p->pc6);
+ fprintf(stderr, "pc7: %016llX\n", p->pc7);
+ }
+ return 0;
}
/*
* TSC: "TSC" 3 columns %3.2
* percentage " %pc3" %6.2
*/
-void print_cnt(struct counters *p)
+int format_counters(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
{
double interval_float;
+ /* if showing only 1st thread in core and this isn't one, bail out */
+ if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ return 0;
+
+ /* if showing only 1st thread in pkg and this isn't one, bail out */
+ if (show_pkg_only && !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ return 0;
+
interval_float = tv_delta.tv_sec + tv_delta.tv_usec/1000000.0;
- /* topology columns, print blanks on 1st (average) line */
- if (p == cnt_average) {
+ /* topo columns, print blanks on 1st (average) line */
+ if (t == &average.threads) {
if (show_pkg)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_pkg && show_core)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_core)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_cpu)
- fprintf(stderr, " " " ");
+ outp += sprintf(outp, " " " ");
} else {
- if (show_pkg)
- fprintf(stderr, "%2d", p->pkg);
+ if (show_pkg) {
+ if (p)
+ outp += sprintf(outp, "%2d", p->package_id);
+ else
+ outp += sprintf(outp, " ");
+ }
if (show_pkg && show_core)
- fprintf(stderr, " ");
- if (show_core)
- fprintf(stderr, "%3d", p->core);
+ outp += sprintf(outp, " ");
+ if (show_core) {
+ if (c)
+ outp += sprintf(outp, "%3d", c->core_id);
+ else
+ outp += sprintf(outp, " ");
+ }
if (show_cpu)
- fprintf(stderr, " %3d", p->cpu);
+ outp += sprintf(outp, " %3d", t->cpu_id);
}
/* %c0 */
if (do_nhm_cstates) {
if (show_pkg || show_core || show_cpu)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (!skip_c0)
- fprintf(stderr, "%6.2f", 100.0 * p->mperf/p->tsc);
+ outp += sprintf(outp, "%6.2f", 100.0 * t->mperf/t->tsc);
else
- fprintf(stderr, " ****");
+ outp += sprintf(outp, " ****");
}
/* GHz */
if (has_aperf) {
if (!aperf_mperf_unstable) {
- fprintf(stderr, " %3.2f",
- 1.0 * p->tsc / units * p->aperf /
- p->mperf / interval_float);
+ outp += sprintf(outp, " %3.2f",
+ 1.0 * t->tsc / units * t->aperf /
+ t->mperf / interval_float);
} else {
- if (p->aperf > p->tsc || p->mperf > p->tsc) {
- fprintf(stderr, " ***");
+ if (t->aperf > t->tsc || t->mperf > t->tsc) {
+ outp += sprintf(outp, " ***");
} else {
- fprintf(stderr, "%3.1f*",
- 1.0 * p->tsc /
- units * p->aperf /
- p->mperf / interval_float);
+ outp += sprintf(outp, "%3.1f*",
+ 1.0 * t->tsc /
+ units * t->aperf /
+ t->mperf / interval_float);
}
}
}
/* TSC */
- fprintf(stderr, "%5.2f", 1.0 * p->tsc/units/interval_float);
+ outp += sprintf(outp, "%5.2f", 1.0 * t->tsc/units/interval_float);
if (do_nhm_cstates) {
if (!skip_c1)
- fprintf(stderr, " %6.2f", 100.0 * p->c1/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * t->c1/t->tsc);
else
- fprintf(stderr, " ****");
+ outp += sprintf(outp, " ****");
}
+
+ /* print per-core data only for 1st thread in core */
+ if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ goto done;
+
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->c3/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * c->c3/t->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->c6/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * c->c6/t->tsc);
if (do_snb_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->c7/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * c->c7/t->tsc);
+
+ /* print per-package data only for 1st core in package */
+ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ goto done;
+
if (do_snb_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc2/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc2/t->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc3/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc3/t->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc6/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc6/t->tsc);
if (do_snb_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc7/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc7/t->tsc);
+done:
if (extra_msr_offset)
- fprintf(stderr, " 0x%016llx", p->extra_msr);
- putc('\n', stderr);
+ outp += sprintf(outp, " 0x%016llx", t->extra_msr);
+ outp += sprintf(outp, "\n");
+
+ return 0;
}
-void print_counters(struct counters *counters)
+void flush_stdout()
+{
+ fputs(output_buffer, stdout);
+ outp = output_buffer;
+}
+void flush_stderr()
+{
+ fputs(output_buffer, stderr);
+ outp = output_buffer;
+}
+void format_all_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
{
- struct counters *cnt;
static int printed;
-
if (!printed || !summary_only)
print_header();
- if (num_cpus > 1)
- print_cnt(cnt_average);
+ if (topo.num_cpus > 1)
+ format_counters(&average.threads, &average.cores,
+ &average.packages);
printed = 1;
if (summary_only)
return;
- for (cnt = counters; cnt != NULL; cnt = cnt->next)
- print_cnt(cnt);
-
+ for_all_cpus(format_counters, t, c, p);
}
-#define SUBTRACT_COUNTER(after, before, delta) (delta = (after - before), (before > after))
+void
+delta_package(struct pkg_data *new, struct pkg_data *old)
+{
+ old->pc2 = new->pc2 - old->pc2;
+ old->pc3 = new->pc3 - old->pc3;
+ old->pc6 = new->pc6 - old->pc6;
+ old->pc7 = new->pc7 - old->pc7;
+}
-int compute_delta(struct counters *after,
- struct counters *before, struct counters *delta)
+void
+delta_core(struct core_data *new, struct core_data *old)
{
- int errors = 0;
- int perf_err = 0;
+ old->c3 = new->c3 - old->c3;
+ old->c6 = new->c6 - old->c6;
+ old->c7 = new->c7 - old->c7;
+}
- skip_c0 = skip_c1 = 0;
+/*
+ * old = new - old
+ */
+void
+delta_thread(struct thread_data *new, struct thread_data *old,
+ struct core_data *core_delta)
+{
+ old->tsc = new->tsc - old->tsc;
+
+ /* check for TSC < 1 Mcycles over interval */
+ if (old->tsc < (1000 * 1000)) {
+ fprintf(stderr, "Insanely slow TSC rate, TSC stops in idle?\n");
+ fprintf(stderr, "You can disable all c-states by booting with \"idle=poll\"\n");
+ fprintf(stderr, "or just the deep ones with \"processor.max_cstate=1\"\n");
+ exit(-3);
+ }
- for ( ; after && before && delta;
- after = after->next, before = before->next, delta = delta->next) {
- if (before->cpu != after->cpu) {
- printf("cpu configuration changed: %d != %d\n",
- before->cpu, after->cpu);
- return -1;
- }
+ old->c1 = new->c1 - old->c1;
- if (SUBTRACT_COUNTER(after->tsc, before->tsc, delta->tsc)) {
- fprintf(stderr, "cpu%d TSC went backwards %llX to %llX\n",
- before->cpu, before->tsc, after->tsc);
- errors++;
- }
- /* check for TSC < 1 Mcycles over interval */
- if (delta->tsc < (1000 * 1000)) {
- fprintf(stderr, "Insanely slow TSC rate,"
- " TSC stops in idle?\n");
- fprintf(stderr, "You can disable all c-states"
- " by booting with \"idle=poll\"\n");
- fprintf(stderr, "or just the deep ones with"
- " \"processor.max_cstate=1\"\n");
- exit(-3);
- }
- if (SUBTRACT_COUNTER(after->c3, before->c3, delta->c3)) {
- fprintf(stderr, "cpu%d c3 counter went backwards %llX to %llX\n",
- before->cpu, before->c3, after->c3);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->c6, before->c6, delta->c6)) {
- fprintf(stderr, "cpu%d c6 counter went backwards %llX to %llX\n",
- before->cpu, before->c6, after->c6);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->c7, before->c7, delta->c7)) {
- fprintf(stderr, "cpu%d c7 counter went backwards %llX to %llX\n",
- before->cpu, before->c7, after->c7);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc2, before->pc2, delta->pc2)) {
- fprintf(stderr, "cpu%d pc2 counter went backwards %llX to %llX\n",
- before->cpu, before->pc2, after->pc2);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc3, before->pc3, delta->pc3)) {
- fprintf(stderr, "cpu%d pc3 counter went backwards %llX to %llX\n",
- before->cpu, before->pc3, after->pc3);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc6, before->pc6, delta->pc6)) {
- fprintf(stderr, "cpu%d pc6 counter went backwards %llX to %llX\n",
- before->cpu, before->pc6, after->pc6);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc7, before->pc7, delta->pc7)) {
- fprintf(stderr, "cpu%d pc7 counter went backwards %llX to %llX\n",
- before->cpu, before->pc7, after->pc7);
- errors++;
- }
+ if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) {
+ old->aperf = new->aperf - old->aperf;
+ old->mperf = new->mperf - old->mperf;
+ } else {
- perf_err = SUBTRACT_COUNTER(after->aperf, before->aperf, delta->aperf);
- if (perf_err) {
- fprintf(stderr, "cpu%d aperf counter went backwards %llX to %llX\n",
- before->cpu, before->aperf, after->aperf);
- }
- perf_err |= SUBTRACT_COUNTER(after->mperf, before->mperf, delta->mperf);
- if (perf_err) {
- fprintf(stderr, "cpu%d mperf counter went backwards %llX to %llX\n",
- before->cpu, before->mperf, after->mperf);
- }
- if (perf_err) {
- if (!aperf_mperf_unstable) {
- fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
- fprintf(stderr, "* Frequency results do not cover entire interval *\n");
- fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
+ if (!aperf_mperf_unstable) {
+ fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
+ fprintf(stderr, "* Frequency results do not cover entire interval *\n");
+ fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
- aperf_mperf_unstable = 1;
- }
- /*
- * mperf delta is likely a huge "positive" number
- * can not use it for calculating c0 time
- */
- skip_c0 = 1;
- skip_c1 = 1;
+ aperf_mperf_unstable = 1;
}
-
/*
- * As mperf and tsc collection are not atomic,
- * it is possible for mperf's non-halted cycles
- * to exceed TSC's all cycles: show c1 = 0% in that case.
+ * mperf delta is likely a huge "positive" number
+ * can not use it for calculating c0 time
*/
- if (delta->mperf > delta->tsc)
- delta->c1 = 0;
- else /* normal case, derive c1 */
- delta->c1 = delta->tsc - delta->mperf
- - delta->c3 - delta->c6 - delta->c7;
+ skip_c0 = 1;
+ skip_c1 = 1;
+ }
- if (delta->mperf == 0)
- delta->mperf = 1; /* divide by 0 protection */
- /*
- * for "extra msr", just copy the latest w/o subtracting
- */
- delta->extra_msr = after->extra_msr;
- if (errors) {
- fprintf(stderr, "ERROR cpu%d before:\n", before->cpu);
- dump_cnt(before);
- fprintf(stderr, "ERROR cpu%d after:\n", before->cpu);
- dump_cnt(after);
- errors = 0;
- }
+ /*
+ * As counter collection is not atomic,
+ * it is possible for mperf's non-halted cycles + idle states
+ * to exceed TSC's all cycles: show c1 = 0% in that case.
+ */
+ if ((old->mperf + core_delta->c3 + core_delta->c6 + core_delta->c7) > old->tsc)
+ old->c1 = 0;
+ else {
+ /* normal case, derive c1 */
+ old->c1 = old->tsc - old->mperf - core_delta->c3
+ - core_delta->c6 - core_delta->c7;
}
+
+ if (old->mperf == 0) {
+ if (verbose > 1) fprintf(stderr, "cpu%d MPERF 0!\n", old->cpu_id);
+ old->mperf = 1; /* divide by 0 protection */
+ }
+
+ /*
+ * for "extra msr", just copy the latest w/o subtracting
+ */
+ old->extra_msr = new->extra_msr;
+}
+
+int delta_cpu(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p, struct thread_data *t2,
+ struct core_data *c2, struct pkg_data *p2)
+{
+ /* calculate core delta only for 1st thread in core */
+ if (t->flags & CPU_IS_FIRST_THREAD_IN_CORE)
+ delta_core(c, c2);
+
+ /* always calculate thread delta */
+ delta_thread(t, t2, c2); /* c2 is core delta */
+
+ /* calculate package delta only for 1st core in package */
+ if (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)
+ delta_package(p, p2);
+
return 0;
}
-void compute_average(struct counters *delta, struct counters *avg)
+void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
+{
+ t->tsc = 0;
+ t->aperf = 0;
+ t->mperf = 0;
+ t->c1 = 0;
+
+ /* tells format_counters to dump all fields from this set */
+ t->flags = CPU_IS_FIRST_THREAD_IN_CORE | CPU_IS_FIRST_CORE_IN_PACKAGE;
+
+ c->c3 = 0;
+ c->c6 = 0;
+ c->c7 = 0;
+
+ p->pc2 = 0;
+ p->pc3 = 0;
+ p->pc6 = 0;
+ p->pc7 = 0;
+}
+int sum_counters(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
{
- struct counters *sum;
+ average.threads.tsc += t->tsc;
+ average.threads.aperf += t->aperf;
+ average.threads.mperf += t->mperf;
+ average.threads.c1 += t->c1;
- sum = calloc(1, sizeof(struct counters));
- if (sum == NULL) {
- perror("calloc sum");
- exit(1);
- }
+ /* sum per-core values only for 1st thread in core */
+ if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ return 0;
- for (; delta; delta = delta->next) {
- sum->tsc += delta->tsc;
- sum->c1 += delta->c1;
- sum->c3 += delta->c3;
- sum->c6 += delta->c6;
- sum->c7 += delta->c7;
- sum->aperf += delta->aperf;
- sum->mperf += delta->mperf;
- sum->pc2 += delta->pc2;
- sum->pc3 += delta->pc3;
- sum->pc6 += delta->pc6;
- sum->pc7 += delta->pc7;
- }
- avg->tsc = sum->tsc/num_cpus;
- avg->c1 = sum->c1/num_cpus;
- avg->c3 = sum->c3/num_cpus;
- avg->c6 = sum->c6/num_cpus;
- avg->c7 = sum->c7/num_cpus;
- avg->aperf = sum->aperf/num_cpus;
- avg->mperf = sum->mperf/num_cpus;
- avg->pc2 = sum->pc2/num_cpus;
- avg->pc3 = sum->pc3/num_cpus;
- avg->pc6 = sum->pc6/num_cpus;
- avg->pc7 = sum->pc7/num_cpus;
-
- free(sum);
+ average.cores.c3 += c->c3;
+ average.cores.c6 += c->c6;
+ average.cores.c7 += c->c7;
+
+ /* sum per-pkg values only for 1st core in pkg */
+ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ return 0;
+
+ average.packages.pc2 += p->pc2;
+ average.packages.pc3 += p->pc3;
+ average.packages.pc6 += p->pc6;
+ average.packages.pc7 += p->pc7;
+
+ return 0;
+}
+/*
+ * sum the counters for all cpus in the system
+ * compute the weighted average
+ */
+void compute_average(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
+{
+ clear_counters(&average.threads, &average.cores, &average.packages);
+
+ for_all_cpus(sum_counters, t, c, p);
+
+ average.threads.tsc /= topo.num_cpus;
+ average.threads.aperf /= topo.num_cpus;
+ average.threads.mperf /= topo.num_cpus;
+ average.threads.c1 /= topo.num_cpus;
+
+ average.cores.c3 /= topo.num_cores;
+ average.cores.c6 /= topo.num_cores;
+ average.cores.c7 /= topo.num_cores;
+
+ average.packages.pc2 /= topo.num_packages;
+ average.packages.pc3 /= topo.num_packages;
+ average.packages.pc6 /= topo.num_packages;
+ average.packages.pc7 /= topo.num_packages;
}
-int get_counters(struct counters *cnt)
+static unsigned long long rdtsc(void)
{
- for ( ; cnt; cnt = cnt->next) {
+ unsigned int low, high;
- if (cpu_migrate(cnt->cpu))
- return -1;
+ asm volatile("rdtsc" : "=a" (low), "=d" (high));
- if (get_msr(cnt->cpu, MSR_TSC, &cnt->tsc))
- return -1;
+ return low | ((unsigned long long)high) << 32;
+}
- if (has_aperf) {
- if (get_msr(cnt->cpu, MSR_APERF, &cnt->aperf))
- return -1;
- if (get_msr(cnt->cpu, MSR_MPERF, &cnt->mperf))
- return -1;
- }
- if (do_nhm_cstates) {
- if (get_msr(cnt->cpu, MSR_CORE_C3_RESIDENCY, &cnt->c3))
- return -1;
- if (get_msr(cnt->cpu, MSR_CORE_C6_RESIDENCY, &cnt->c6))
- return -1;
- }
+/*
+ * get_counters(...)
+ * migrate to cpu
+ * acquire and record local counters for that cpu
+ */
+int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
+{
+ int cpu = t->cpu_id;
- if (do_snb_cstates)
- if (get_msr(cnt->cpu, MSR_CORE_C7_RESIDENCY, &cnt->c7))
- return -1;
+ if (cpu_migrate(cpu))
+ return -1;
- if (do_nhm_cstates) {
- if (get_msr(cnt->cpu, MSR_PKG_C3_RESIDENCY, &cnt->pc3))
- return -1;
- if (get_msr(cnt->cpu, MSR_PKG_C6_RESIDENCY, &cnt->pc6))
- return -1;
- }
- if (do_snb_cstates) {
- if (get_msr(cnt->cpu, MSR_PKG_C2_RESIDENCY, &cnt->pc2))
- return -1;
- if (get_msr(cnt->cpu, MSR_PKG_C7_RESIDENCY, &cnt->pc7))
- return -1;
- }
- if (extra_msr_offset)
- if (get_msr(cnt->cpu, extra_msr_offset, &cnt->extra_msr))
- return -1;
+ t->tsc = rdtsc(); /* we are running on local CPU of interest */
+
+ if (has_aperf) {
+ if (get_msr(cpu, MSR_APERF, &t->aperf))
+ return -3;
+ if (get_msr(cpu, MSR_MPERF, &t->mperf))
+ return -4;
+ }
+
+ if (extra_msr_offset)
+ if (get_msr(cpu, extra_msr_offset, &t->extra_msr))
+ return -5;
+
+ /* collect core counters only for 1st thread in core */
+ if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ return 0;
+
+ if (do_nhm_cstates) {
+ if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3))
+ return -6;
+ if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6))
+ return -7;
+ }
+
+ if (do_snb_cstates)
+ if (get_msr(cpu, MSR_CORE_C7_RESIDENCY, &c->c7))
+ return -8;
+
+ /* collect package counters only for 1st core in package */
+ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ return 0;
+
+ if (do_nhm_cstates) {
+ if (get_msr(cpu, MSR_PKG_C3_RESIDENCY, &p->pc3))
+ return -9;
+ if (get_msr(cpu, MSR_PKG_C6_RESIDENCY, &p->pc6))
+ return -10;
+ }
+ if (do_snb_cstates) {
+ if (get_msr(cpu, MSR_PKG_C2_RESIDENCY, &p->pc2))
+ return -11;
+ if (get_msr(cpu, MSR_PKG_C7_RESIDENCY, &p->pc7))
+ return -12;
}
return 0;
}
-void print_nehalem_info(void)
+void print_verbose_header(void)
{
unsigned long long msr;
unsigned int ratio;
}
-void free_counter_list(struct counters *list)
+void free_all_buffers(void)
{
- struct counters *p;
+ CPU_FREE(cpu_present_set);
+ cpu_present_set = NULL;
+ cpu_present_set = 0;
- for (p = list; p; ) {
- struct counters *free_me;
+ CPU_FREE(cpu_affinity_set);
+ cpu_affinity_set = NULL;
+ cpu_affinity_setsize = 0;
- free_me = p;
- p = p->next;
- free(free_me);
- }
-}
+ free(thread_even);
+ free(core_even);
+ free(package_even);
-void free_all_counters(void)
-{
- free_counter_list(cnt_even);
- cnt_even = NULL;
+ thread_even = NULL;
+ core_even = NULL;
+ package_even = NULL;
- free_counter_list(cnt_odd);
- cnt_odd = NULL;
+ free(thread_odd);
+ free(core_odd);
+ free(package_odd);
- free_counter_list(cnt_delta);
- cnt_delta = NULL;
+ thread_odd = NULL;
+ core_odd = NULL;
+ package_odd = NULL;
- free_counter_list(cnt_average);
- cnt_average = NULL;
+ free(output_buffer);
+ output_buffer = NULL;
+ outp = NULL;
}
-void insert_counters(struct counters **list,
- struct counters *new)
+/*
+ * cpu_is_first_sibling_in_core(cpu)
+ * return 1 if given CPU is 1st HT sibling in the core
+ */
+int cpu_is_first_sibling_in_core(int cpu)
{
- struct counters *prev;
-
- /*
- * list was empty
- */
- if (*list == NULL) {
- new->next = *list;
- *list = new;
- return;
- }
-
- if (!summary_only)
- show_cpu = 1; /* there is more than one CPU */
-
- /*
- * insert on front of list.
- * It is sorted by ascending package#, core#, cpu#
- */
- if (((*list)->pkg > new->pkg) ||
- (((*list)->pkg == new->pkg) && ((*list)->core > new->core)) ||
- (((*list)->pkg == new->pkg) && ((*list)->core == new->core) && ((*list)->cpu > new->cpu))) {
- new->next = *list;
- *list = new;
- return;
- }
-
- prev = *list;
-
- while (prev->next && (prev->next->pkg < new->pkg)) {
- prev = prev->next;
- if (!summary_only)
- show_pkg = 1; /* there is more than 1 package */
- }
-
- while (prev->next && (prev->next->pkg == new->pkg)
- && (prev->next->core < new->core)) {
- prev = prev->next;
- if (!summary_only)
- show_core = 1; /* there is more than 1 core */
- }
+ char path[64];
+ FILE *filep;
+ int first_cpu;
- while (prev->next && (prev->next->pkg == new->pkg)
- && (prev->next->core == new->core)
- && (prev->next->cpu < new->cpu)) {
- prev = prev->next;
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
+ exit(1);
}
-
- /*
- * insert after "prev"
- */
- new->next = prev->next;
- prev->next = new;
+ fscanf(filep, "%d", &first_cpu);
+ fclose(filep);
+ return (cpu == first_cpu);
}
-void alloc_new_counters(int pkg, int core, int cpu)
+/*
+ * cpu_is_first_core_in_package(cpu)
+ * return 1 if given CPU is 1st core in package
+ */
+int cpu_is_first_core_in_package(int cpu)
{
- struct counters *new;
-
- if (verbose > 1)
- printf("pkg%d core%d, cpu%d\n", pkg, core, cpu);
-
- new = (struct counters *)calloc(1, sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
- exit(1);
- }
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- insert_counters(&cnt_odd, new);
-
- new = (struct counters *)calloc(1,
- sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
- exit(1);
- }
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- insert_counters(&cnt_even, new);
-
- new = (struct counters *)calloc(1, sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
- exit(1);
- }
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- insert_counters(&cnt_delta, new);
+ char path[64];
+ FILE *filep;
+ int first_cpu;
- new = (struct counters *)calloc(1, sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/core_siblings_list", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
exit(1);
}
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- cnt_average = new;
+ fscanf(filep, "%d", &first_cpu);
+ fclose(filep);
+ return (cpu == first_cpu);
}
int get_physical_package_id(int cpu)
{
- char path[64];
+ char path[80];
FILE *filep;
int pkg;
int get_core_id(int cpu)
{
- char path[64];
+ char path[80];
FILE *filep;
int core;
return core;
}
+int get_num_ht_siblings(int cpu)
+{
+ char path[80];
+ FILE *filep;
+ int sib1, sib2;
+ int matches;
+ char character;
+
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
+ exit(1);
+ }
+ /*
+ * file format:
+ * if a pair of number with a character between: 2 siblings (eg. 1-2, or 1,4)
+ * otherwinse 1 sibling (self).
+ */
+ matches = fscanf(filep, "%d%c%d\n", &sib1, &character, &sib2);
+
+ fclose(filep);
+
+ if (matches == 3)
+ return 2;
+ else
+ return 1;
+}
+
/*
- * run func(pkg, core, cpu) on every cpu in /proc/stat
+ * run func(thread, core, package) in topology order
+ * skip non-present cpus
*/
-int for_all_cpus(void (func)(int, int, int))
+int for_all_cpus_2(int (func)(struct thread_data *, struct core_data *,
+ struct pkg_data *, struct thread_data *, struct core_data *,
+ struct pkg_data *), struct thread_data *thread_base,
+ struct core_data *core_base, struct pkg_data *pkg_base,
+ struct thread_data *thread_base2, struct core_data *core_base2,
+ struct pkg_data *pkg_base2)
+{
+ int retval, pkg_no, core_no, thread_no;
+
+ for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) {
+ for (core_no = 0; core_no < topo.num_cores_per_pkg; ++core_no) {
+ for (thread_no = 0; thread_no <
+ topo.num_threads_per_core; ++thread_no) {
+ struct thread_data *t, *t2;
+ struct core_data *c, *c2;
+ struct pkg_data *p, *p2;
+
+ t = GET_THREAD(thread_base, thread_no, core_no, pkg_no);
+
+ if (cpu_is_not_present(t->cpu_id))
+ continue;
+
+ t2 = GET_THREAD(thread_base2, thread_no, core_no, pkg_no);
+
+ c = GET_CORE(core_base, core_no, pkg_no);
+ c2 = GET_CORE(core_base2, core_no, pkg_no);
+
+ p = GET_PKG(pkg_base, pkg_no);
+ p2 = GET_PKG(pkg_base2, pkg_no);
+
+ retval = func(t, c, p, t2, c2, p2);
+ if (retval)
+ return retval;
+ }
+ }
+ }
+ return 0;
+}
+
+/*
+ * run func(cpu) on every cpu in /proc/stat
+ * return max_cpu number
+ */
+int for_all_proc_cpus(int (func)(int))
{
FILE *fp;
- int cpu_count;
+ int cpu_num;
int retval;
fp = fopen(proc_stat, "r");
exit(1);
}
- for (cpu_count = 0; ; cpu_count++) {
- int cpu;
-
- retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu);
+ while (1) {
+ retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu_num);
if (retval != 1)
break;
- func(get_physical_package_id(cpu), get_core_id(cpu), cpu);
+ retval = func(cpu_num);
+ if (retval) {
+ fclose(fp);
+ return(retval);
+ }
}
fclose(fp);
- return cpu_count;
+ return 0;
}
void re_initialize(void)
{
- free_all_counters();
- num_cpus = for_all_cpus(alloc_new_counters);
- cpu_mask_uninit();
- cpu_mask_init(num_cpus);
- printf("turbostat: re-initialized with num_cpus %d\n", num_cpus);
+ free_all_buffers();
+ setup_all_buffers();
+ printf("turbostat: re-initialized with num_cpus %d\n", topo.num_cpus);
}
-void dummy(int pkg, int core, int cpu) { return; }
+
/*
- * check to see if a cpu came on-line
+ * count_cpus()
+ * remember the last one seen, it will be the max
*/
-int verify_num_cpus(void)
+int count_cpus(int cpu)
{
- int new_num_cpus;
-
- new_num_cpus = for_all_cpus(dummy);
+ if (topo.max_cpu_num < cpu)
+ topo.max_cpu_num = cpu;
- if (new_num_cpus != num_cpus) {
- if (verbose)
- printf("num_cpus was %d, is now %d\n",
- num_cpus, new_num_cpus);
- return -1;
- }
+ topo.num_cpus += 1;
+ return 0;
+}
+int mark_cpu_present(int cpu)
+{
+ CPU_SET_S(cpu, cpu_present_setsize, cpu_present_set);
return 0;
}
void turbostat_loop()
{
+ int retval;
+
restart:
- get_counters(cnt_even);
+ retval = for_all_cpus(get_counters, EVEN_COUNTERS);
+ if (retval) {
+ re_initialize();
+ goto restart;
+ }
gettimeofday(&tv_even, (struct timezone *)NULL);
while (1) {
- if (verify_num_cpus()) {
+ if (for_all_proc_cpus(cpu_is_not_present)) {
re_initialize();
goto restart;
}
sleep(interval_sec);
- if (get_counters(cnt_odd)) {
+ retval = for_all_cpus(get_counters, ODD_COUNTERS);
+ if (retval) {
re_initialize();
goto restart;
}
gettimeofday(&tv_odd, (struct timezone *)NULL);
- compute_delta(cnt_odd, cnt_even, cnt_delta);
timersub(&tv_odd, &tv_even, &tv_delta);
- compute_average(cnt_delta, cnt_average);
- print_counters(cnt_delta);
+ for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS);
+ compute_average(EVEN_COUNTERS);
+ format_all_counters(EVEN_COUNTERS);
+ flush_stdout();
sleep(interval_sec);
- if (get_counters(cnt_even)) {
+ retval = for_all_cpus(get_counters, EVEN_COUNTERS);
+ if (retval) {
re_initialize();
goto restart;
}
gettimeofday(&tv_even, (struct timezone *)NULL);
- compute_delta(cnt_even, cnt_odd, cnt_delta);
timersub(&tv_even, &tv_odd, &tv_delta);
- compute_average(cnt_delta, cnt_average);
- print_counters(cnt_delta);
+ for_all_cpus_2(delta_cpu, EVEN_COUNTERS, ODD_COUNTERS);
+ compute_average(ODD_COUNTERS);
+ format_all_counters(ODD_COUNTERS);
+ flush_stdout();
}
}
return 0;
}
+void topology_probe()
+{
+ int i;
+ int max_core_id = 0;
+ int max_package_id = 0;
+ int max_siblings = 0;
+ struct cpu_topology {
+ int core_id;
+ int physical_package_id;
+ } *cpus;
+
+ /* Initialize num_cpus, max_cpu_num */
+ topo.num_cpus = 0;
+ topo.max_cpu_num = 0;
+ for_all_proc_cpus(count_cpus);
+ if (!summary_only && topo.num_cpus > 1)
+ show_cpu = 1;
+
+ if (verbose > 1)
+ fprintf(stderr, "num_cpus %d max_cpu_num %d\n", topo.num_cpus, topo.max_cpu_num);
+
+ cpus = calloc(1, (topo.max_cpu_num + 1) * sizeof(struct cpu_topology));
+ if (cpus == NULL) {
+ perror("calloc cpus");
+ exit(1);
+ }
+
+ /*
+ * Allocate and initialize cpu_present_set
+ */
+ cpu_present_set = CPU_ALLOC((topo.max_cpu_num + 1));
+ if (cpu_present_set == NULL) {
+ perror("CPU_ALLOC");
+ exit(3);
+ }
+ cpu_present_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1));
+ CPU_ZERO_S(cpu_present_setsize, cpu_present_set);
+ for_all_proc_cpus(mark_cpu_present);
+
+ /*
+ * Allocate and initialize cpu_affinity_set
+ */
+ cpu_affinity_set = CPU_ALLOC((topo.max_cpu_num + 1));
+ if (cpu_affinity_set == NULL) {
+ perror("CPU_ALLOC");
+ exit(3);
+ }
+ cpu_affinity_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1));
+ CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set);
+
+
+ /*
+ * For online cpus
+ * find max_core_id, max_package_id
+ */
+ for (i = 0; i <= topo.max_cpu_num; ++i) {
+ int siblings;
+
+ if (cpu_is_not_present(i)) {
+ if (verbose > 1)
+ fprintf(stderr, "cpu%d NOT PRESENT\n", i);
+ continue;
+ }
+ cpus[i].core_id = get_core_id(i);
+ if (cpus[i].core_id > max_core_id)
+ max_core_id = cpus[i].core_id;
+
+ cpus[i].physical_package_id = get_physical_package_id(i);
+ if (cpus[i].physical_package_id > max_package_id)
+ max_package_id = cpus[i].physical_package_id;
+
+ siblings = get_num_ht_siblings(i);
+ if (siblings > max_siblings)
+ max_siblings = siblings;
+ if (verbose > 1)
+ fprintf(stderr, "cpu %d pkg %d core %d\n",
+ i, cpus[i].physical_package_id, cpus[i].core_id);
+ }
+ topo.num_cores_per_pkg = max_core_id + 1;
+ if (verbose > 1)
+ fprintf(stderr, "max_core_id %d, sizing for %d cores per package\n",
+ max_core_id, topo.num_cores_per_pkg);
+ if (!summary_only && topo.num_cores_per_pkg > 1)
+ show_core = 1;
+
+ topo.num_packages = max_package_id + 1;
+ if (verbose > 1)
+ fprintf(stderr, "max_package_id %d, sizing for %d packages\n",
+ max_package_id, topo.num_packages);
+ if (!summary_only && topo.num_packages > 1)
+ show_pkg = 1;
+
+ topo.num_threads_per_core = max_siblings;
+ if (verbose > 1)
+ fprintf(stderr, "max_siblings %d\n", max_siblings);
+
+ free(cpus);
+}
+
+void
+allocate_counters(struct thread_data **t, struct core_data **c, struct pkg_data **p)
+{
+ int i;
+
+ *t = calloc(topo.num_threads_per_core * topo.num_cores_per_pkg *
+ topo.num_packages, sizeof(struct thread_data));
+ if (*t == NULL)
+ goto error;
+
+ for (i = 0; i < topo.num_threads_per_core *
+ topo.num_cores_per_pkg * topo.num_packages; i++)
+ (*t)[i].cpu_id = -1;
+
+ *c = calloc(topo.num_cores_per_pkg * topo.num_packages,
+ sizeof(struct core_data));
+ if (*c == NULL)
+ goto error;
+
+ for (i = 0; i < topo.num_cores_per_pkg * topo.num_packages; i++)
+ (*c)[i].core_id = -1;
+
+ *p = calloc(topo.num_packages, sizeof(struct pkg_data));
+ if (*p == NULL)
+ goto error;
+
+ for (i = 0; i < topo.num_packages; i++)
+ (*p)[i].package_id = i;
+
+ return;
+error:
+ perror("calloc counters");
+ exit(1);
+}
+/*
+ * init_counter()
+ *
+ * set cpu_id, core_num, pkg_num
+ * set FIRST_THREAD_IN_CORE and FIRST_CORE_IN_PACKAGE
+ *
+ * increment topo.num_cores when 1st core in pkg seen
+ */
+void init_counter(struct thread_data *thread_base, struct core_data *core_base,
+ struct pkg_data *pkg_base, int thread_num, int core_num,
+ int pkg_num, int cpu_id)
+{
+ struct thread_data *t;
+ struct core_data *c;
+ struct pkg_data *p;
+
+ t = GET_THREAD(thread_base, thread_num, core_num, pkg_num);
+ c = GET_CORE(core_base, core_num, pkg_num);
+ p = GET_PKG(pkg_base, pkg_num);
+
+ t->cpu_id = cpu_id;
+ if (thread_num == 0) {
+ t->flags |= CPU_IS_FIRST_THREAD_IN_CORE;
+ if (cpu_is_first_core_in_package(cpu_id))
+ t->flags |= CPU_IS_FIRST_CORE_IN_PACKAGE;
+ }
+
+ c->core_id = core_num;
+ p->package_id = pkg_num;
+}
+
+
+int initialize_counters(int cpu_id)
+{
+ int my_thread_id, my_core_id, my_package_id;
+
+ my_package_id = get_physical_package_id(cpu_id);
+ my_core_id = get_core_id(cpu_id);
+
+ if (cpu_is_first_sibling_in_core(cpu_id)) {
+ my_thread_id = 0;
+ topo.num_cores++;
+ } else {
+ my_thread_id = 1;
+ }
+
+ init_counter(EVEN_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id);
+ init_counter(ODD_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id);
+ return 0;
+}
+
+void allocate_output_buffer()
+{
+ output_buffer = calloc(1, (1 + topo.num_cpus) * 128);
+ outp = output_buffer;
+ if (outp == NULL) {
+ perror("calloc");
+ exit(-1);
+ }
+}
+
+void setup_all_buffers(void)
+{
+ topology_probe();
+ allocate_counters(&thread_even, &core_even, &package_even);
+ allocate_counters(&thread_odd, &core_odd, &package_odd);
+ allocate_output_buffer();
+ for_all_proc_cpus(initialize_counters);
+}
void turbostat_init()
{
check_cpuid();
check_dev_msr();
check_super_user();
- num_cpus = for_all_cpus(alloc_new_counters);
- cpu_mask_init(num_cpus);
+ setup_all_buffers();
if (verbose)
- print_nehalem_info();
+ print_verbose_header();
}
int fork_it(char **argv)
{
- int retval;
pid_t child_pid;
- get_counters(cnt_even);
- /* clear affinity side-effect of get_counters() */
- sched_setaffinity(0, cpu_present_setsize, cpu_present_set);
+ for_all_cpus(get_counters, EVEN_COUNTERS);
+ /* clear affinity side-effect of get_counters() */
+ sched_setaffinity(0, cpu_present_setsize, cpu_present_set);
gettimeofday(&tv_even, (struct timezone *)NULL);
child_pid = fork();
exit(1);
}
}
- get_counters(cnt_odd);
+ /*
+ * n.b. fork_it() does not check for errors from for_all_cpus()
+ * because re-starting is problematic when forking
+ */
+ for_all_cpus(get_counters, ODD_COUNTERS);
gettimeofday(&tv_odd, (struct timezone *)NULL);
- retval = compute_delta(cnt_odd, cnt_even, cnt_delta);
-
timersub(&tv_odd, &tv_even, &tv_delta);
- compute_average(cnt_delta, cnt_average);
- if (!retval)
- print_counters(cnt_delta);
+ for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS);
+ compute_average(EVEN_COUNTERS);
+ format_all_counters(EVEN_COUNTERS);
+ flush_stderr();
fprintf(stderr, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0);
progname = argv[0];
- while ((opt = getopt(argc, argv, "+svi:M:")) != -1) {
+ while ((opt = getopt(argc, argv, "+cpsvi:M:")) != -1) {
switch (opt) {
+ case 'c':
+ show_core_only++;
+ break;
+ case 'p':
+ show_pkg_only++;
+ break;
case 's':
summary_only++;
break;
cmdline(argc, argv);
if (verbose > 1)
- fprintf(stderr, "turbostat Dec 6, 2010"
+ fprintf(stderr, "turbostat v2.0 May 16, 2012"
" - Len Brown <lenb@kernel.org>\n");
- if (verbose > 1)
- fprintf(stderr, "http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/\n");
turbostat_init();
projects / karo-tx-linux.git / commitdiff